Consolidated CDA (C-CDA)
4.0.0-ballot - STU4 United States of America flag

Consolidated CDA (C-CDA), published by Health Level Seven. This guide is not an authorized publication; it is the continuous build for version 4.0.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/CDA-ccda/ and changes regularly. See the Directory of published versions

Logical Model: PregnancyStatusObservation - Detailed Descriptions

Draft as of 2024-11-21

Definitions for the PregnancyStatusObservation logical model.

Guidance on how to interpret the contents of this table can be found here

0. Observation
Logical ContainerClinicalDocument (CDA Class)
ValidationInstance of this type are validated by templateId
XML FormatIn the XML format, this property has the namespace urn:hl7-org:v3.
Invariantsshould-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())
should-effectiveTime: SHOULD contain effectiveTime (effectiveTime.exists())
2. Observation.templateId
Control1..?
SlicingThis element introduces a set of slices on Observation.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ root
  • 4. Observation.templateId:pregnancy-obs
    Slice Namepregnancy-obs
    Control1..1
    6. Observation.templateId:pregnancy-obs.root
    Control1..?
    Pattern Value2.16.840.1.113883.10.20.15.3.8
    8. Observation.templateId:pregnancy-obs.extension
    Control0..0
    10. Observation.classCode
    Comments

    SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:81-451).

    Fixed ValueOBS
    12. Observation.moodCode
    Comments

    SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:81-452).

    Fixed ValueEVN
    14. Observation.code
    Comments

    SHALL contain exactly one [1..1] code (CONF:81-19153).

    16. Observation.code.code
    ShortPregnancy Status
    Comments

    This code SHALL contain exactly one [1..1] @code="82810-3" Pregnancy Status.

    Control1..?
    Pattern Value82810-3
    18. Observation.code.codeSystem
    Comments

    This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.5.4" (CodeSystem: HL7ActCode urn:oid:2.16.840.1.113883.5.4) (CONF:81-26505).

    Control1..?
    Pattern Value2.16.840.1.113883.5.4
    20. Observation.text
    ShortSHOULD reference the portion of section narrative text corresponding to this entry
    22. Observation.text.reference
    Invariantsvalue-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#'))
    24. Observation.statusCode
    Comments

    SHALL contain exactly one [1..1] statusCode (CONF:81-455).

    Control1..?
    26. Observation.statusCode.code
    Comments

    This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:81-19110).

    Control1..?
    Fixed Valuecompleted
    28. Observation.effectiveTime
    Comments

    SHALL contain exactly one [1..1] effectiveTime.

    Control1..?
    Invariantsvalue-only: Interval fields SHALL NOT be present ((low | high | width | center).empty())
    30. Observation.effectiveTime.value
    Shortvalue should be used instead of low/high
    32. Observation.value
    Comments

    SHALL contain exactly one [1..1] value with @xsi:type="CD".

    Control1..1
    Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD, http://hl7.org/cda/stds/core/StructureDefinition/EIVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/CO, http://hl7.org/cda/stds/core/StructureDefinition/TEL, http://hl7.org/cda/stds/core/StructureDefinition/EN, http://hl7.org/cda/stds/core/StructureDefinition/BL, http://hl7.org/cda/stds/core/StructureDefinition/AD, http://hl7.org/cda/stds/core/StructureDefinition/PIVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/RTO-PQ-PQ, http://hl7.org/cda/stds/core/StructureDefinition/SXPR-TS, http://hl7.org/cda/stds/core/StructureDefinition/ED, http://hl7.org/cda/stds/core/StructureDefinition/TS, http://hl7.org/cda/stds/core/StructureDefinition/II, http://hl7.org/cda/stds/core/StructureDefinition/ST, http://hl7.org/cda/stds/core/StructureDefinition/PQ, http://hl7.org/cda/stds/core/StructureDefinition/IVL-PQ, http://hl7.org/cda/stds/core/StructureDefinition/CE, http://hl7.org/cda/stds/core/StructureDefinition/MO, http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/ANY, http://hl7.org/cda/stds/core/StructureDefinition/INT, http://hl7.org/cda/stds/core/StructureDefinition/REAL, http://hl7.org/cda/stds/core/StructureDefinition/CV, http://hl7.org/cda/stds/core/StructureDefinition/SC
    34. Observation.value.nullFlavor
    Control0..0
    36. Observation.value.code
    Control1..?
    BindingThe codes SHALL be taken from Pregnancy Status Observation .
    (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1240.12)
    38. Observation.entryRelationship
    SlicingThis element introduces a set of slices on Observation.entryRelationship. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • profile @ observation
    • 40. Observation.entryRelationship:estimatedDateofDelivery
      Slice NameestimatedDateofDelivery
      Comments

      MAY contain zero or one [0..1] entryRelationship (CONF:81-458) such that it

      Control0..1
      42. Observation.entryRelationship:estimatedDateofDelivery.typeCode
      Comments

      SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:81-459).

      Fixed ValueREFR
      44. Observation.entryRelationship:estimatedDateofDelivery.observation
      Comments

      SHALL contain exactly one [1..1] observationEstimated Date of Delivery (identifier: urn:oid:2.16.840.1.113883.10.20.15.3.1) (CONF:81-15584).

      Control1..?
      Typehttp://hl7.org/cda/stds/core/StructureDefinition/Observation(Estimated Date of Delivery)

      Guidance on how to interpret the contents of this table can be found here

      0. Observation
      Definition

      Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type.


      Base definition for all types defined in FHIR type system.

      ShortBase for all types and resources
      Control10..1*
      Is Modifierfalse
      Logical ContainerClinicalDocument (CDA Class)
      ValidationInstance of this type are validated by templateId
      XML FormatIn the XML format, this property has the namespace urn:hl7-org:v3.
      Invariantsshould-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())
      should-effectiveTime: SHOULD contain effectiveTime (effectiveTime.exists())
      2. Observation.templateId
      Definition

      When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

      Control1..*
      Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
      SlicingThis element introduces a set of slices on Observation.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ root
      • 4. Observation.templateId:pregnancy-obs
        Slice Namepregnancy-obs
        Definition

        When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

        Control1..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
        6. Observation.templateId:pregnancy-obs.root
        Definition

        A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

        Control1..1
        Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelRoot
        Pattern Value2.16.840.1.113883.10.20.15.3.8
        8. Observation.templateId:pregnancy-obs.extension
        Definition

        A character string as a unique identifier within the scope of the identifier root.

        Control0..0
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelExtension
        10. Observation.classCode
        Comments

        SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:81-451).

        Control1..1
        BindingThe codes SHALL be taken from CDAActClassObservation
        (required to http://hl7.org/cda/stds/core/ValueSet/CDAActClassObservation)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        Fixed ValueOBS
        12. Observation.moodCode
        Comments

        SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:81-452).

        Control1..1
        BindingThe codes SHALL be taken from XActMoodDocumentObservation (2.0.0)
        (required to http://terminology.hl7.org/ValueSet/v3-xActMoodDocumentObservation|2.0.0)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        Fixed ValueEVN
        14. Observation.code
        Definition

        Describes what was observed. Sometimes this is called the observation "name".

        ShortType of observation (code / type)
        Comments

        SHALL contain exactly one [1..1] code (CONF:81-19153).


        All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

        Control1..1
        This element is affected by the following invariants: obs-7
        BindingFor example codes, see ObservationTypehttp://hl7.org/fhir/ValueSet/observation-codes
        (example to http://terminology.hl7.org/ValueSet/v3-ObservationType)
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/CDCodeableConcept
        Is Modifierfalse
        XML FormatThe type of this property is determined using the xsi:typeattribute.
        Requirements

        Knowing what kind of observation is being made is essential to understanding the observation.

        Alternate NamesName
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. Observation.code.code
        Definition

        The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

        ShortPregnancy Status
        Comments

        This code SHALL contain exactly one [1..1] @code="82810-3" Pregnancy Status.

        Control1..1
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode
        Pattern Value82810-3
        18. Observation.code.codeSystem
        Definition

        Specifies the code system that defines the code.

        Comments

        This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.5.4" (CodeSystem: HL7ActCode urn:oid:2.16.840.1.113883.5.4) (CONF:81-26505).

        Control1..1
        Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode System
        Pattern Value2.16.840.1.113883.5.4
        20. Observation.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortSHOULD reference the portion of section narrative text corresponding to this entryText summary of the resource, for human interpretation
        Comments

        Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        This element is affected by the following invariants: dom-6
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/EDNarrative
        Is Modifierfalse
        XML FormatThe type of this property is determined using the xsi:typeattribute.
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Observation.text.reference
        Definition

        A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data.

        Control0..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/TEL
        LabelReference
        Invariantsvalue-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#'))
        24. Observation.statusCode
        Comments

        SHALL contain exactly one [1..1] statusCode (CONF:81-455).

        Control1..1
        BindingThe codes SHALL be taken from ActStatus
        (required to http://terminology.hl7.org/ValueSet/v3-ActStatus)
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
        26. Observation.statusCode.code
        Definition

        The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

        Comments

        This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:81-19110).

        Control1..1
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode
        Fixed Valuecompleted
        28. Observation.statusCode.codeSystem
        Definition

        Specifies the code system that defines the code.

        Control0..0
        Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode System
        30. Observation.statusCode.codeSystemName
        Definition

        The common name of the coding system.

        Control0..0
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode System Name
        32. Observation.statusCode.codeSystemVersion
        Definition

        If applicable, a version descriptor defined specifically for the given code system.

        Control0..0
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode System Version
        34. Observation.statusCode.displayName
        Definition

        A name or title for the code, under which the sending system shows the code value to its users.

        Control0..0
        Typestring(st: Character String)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelDisplay Name
        36. Observation.statusCode.originalText
        Definition

        The text or phrase used as the basis for the coding.

        Control0..0
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
        LabelOriginal Text
        38. Observation.statusCode.qualifier
        Definition

        Specifies additional codes that increase the specificity of the the primary code.

        Control0..0
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/CR
        LabelQualifier
        40. Observation.statusCode.translation
        Definition

        A set of other concept descriptors that translate this concept descriptor into other code systems.

        Control0..0
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
        XML FormatThe type of this property is determined using the xsi:typeattribute.
        LabelTranslation
        42. Observation.effectiveTime
        Comments

        SHALL contain exactly one [1..1] effectiveTime.

        Control1..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/IVL-TS
        Invariantsvalue-only: Interval fields SHALL NOT be present ((low | high | width | center).empty())
        44. Observation.effectiveTime.value
        Definition

        A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression.

        Shortvalue should be used instead of low/high
        Control0..1
        TypedateTime(ts: Point in Time)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Date FormatYYYYMMDDHHMMSS.UUUU[+|-ZZzz]
        XML FormatIn the XML format, this property is represented as an attribute.
        46. Observation.value
        Comments

        SHALL contain exactly one [1..1] value with @xsi:type="CD".

        Control1..1
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
        XML FormatThe type of this property is determined using the xsi:typeattribute.
        48. Observation.value.nullFlavor
        Definition

        If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

        Control0..0
        BindingThe codes SHALL be taken from CDANullFlavor
        (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelExceptional Value Detail
        50. Observation.value.code
        Definition

        The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

        Control1..1
        BindingThe codes SHALL be taken from Pregnancy Status Observation .
        (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1240.12)
        Typecode(cs: Coded Simple Value)
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        LabelCode
        52. Observation.entryRelationship
        Control0..*
        Typehttp://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
        SlicingThis element introduces a set of slices on Observation.entryRelationship. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • profile @ observation
        • 54. Observation.entryRelationship:estimatedDateofDelivery
          Slice NameestimatedDateofDelivery
          Comments

          MAY contain zero or one [0..1] entryRelationship (CONF:81-458) such that it

          Control0..1
          Typehttp://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
          56. Observation.entryRelationship:estimatedDateofDelivery.typeCode
          Comments

          SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:81-459).

          Control1..1
          BindingThe codes SHALL be taken from x_ActRelationshipEntryRelationship
          (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship)
          Typecode(cs: Coded Simple Value)
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          Fixed ValueREFR
          58. Observation.entryRelationship:estimatedDateofDelivery.observation
          Definition

          Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type.

          ShortBase for all types and resources
          Comments

          SHALL contain exactly one [1..1] observationEstimated Date of Delivery (identifier: urn:oid:2.16.840.1.113883.10.20.15.3.1) (CONF:81-15584).

          Control1..1
          Typehttp://hl7.org/cda/stds/core/StructureDefinition/Observation(Estimated Date of Delivery)
          Is Modifierfalse
          Invariantsshould-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())

          Guidance on how to interpret the contents of this table can be found here

          0. Observation
          Definition

          Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type.

          ShortBase for all types and resources
          Control1..1
          Is Modifierfalse
          Logical ContainerClinicalDocument (CDA Class)
          ValidationInstance of this type are validated by templateId
          XML FormatIn the XML format, this property has the namespace urn:hl7-org:v3.
          Invariantsshould-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())
          should-effectiveTime: SHOULD contain effectiveTime (effectiveTime.exists())
          2. Observation.nullFlavor
          Definition

          If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

          Control0..1
          BindingThe codes SHALL be taken from CDANullFlavor
          (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
          Typecode(cs: Coded Simple Value)
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          LabelExceptional Value Detail
          4. Observation.realmCode
          Definition

          When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question

          Control0..*
          Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
          6. Observation.typeId
          Definition

          When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.

          Control0..1
          Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
          8. Observation.typeId.nullFlavor
          Definition

          If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

          Control0..1
          BindingThe codes SHALL be taken from CDANullFlavor
          (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
          Typecode(cs: Coded Simple Value)
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          LabelExceptional Value Detail
          10. Observation.typeId.assigningAuthorityName
          Definition

          A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

          Control0..1
          Typestring(st: Character String)
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          LabelAssigning Authority Name
          12. Observation.typeId.displayable
          Definition

          Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

          Control0..1
          Typeboolean(bl: Boolean)
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          LabelDisplayable
          14. Observation.typeId.root
          Definition

          Identifies the type as an HL7 Registered model

          Control1..1
          Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          LabelRoot
          Fixed Value2.16.840.1.113883.1.3
          16. Observation.typeId.extension
          Definition

          A character string as a unique identifier within the scope of the identifier root.

          Control1..1
          Typestring(st: Character String)
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          LabelExtension
          18. Observation.templateId
          Definition

          When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

          Control1..*
          Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
          SlicingThis element introduces a set of slices on Observation.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ root
          • 20. Observation.templateId:pregnancy-obs
            Slice Namepregnancy-obs
            Definition

            When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

            Control1..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
            22. Observation.templateId:pregnancy-obs.nullFlavor
            Definition

            If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

            Control0..1
            BindingThe codes SHALL be taken from CDANullFlavor
            (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelExceptional Value Detail
            24. Observation.templateId:pregnancy-obs.assigningAuthorityName
            Definition

            A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelAssigning Authority Name
            26. Observation.templateId:pregnancy-obs.displayable
            Definition

            Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

            Control0..1
            Typeboolean(bl: Boolean)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelDisplayable
            28. Observation.templateId:pregnancy-obs.root
            Definition

            A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

            Control1..1
            Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelRoot
            Pattern Value2.16.840.1.113883.10.20.15.3.8
            30. Observation.templateId:pregnancy-obs.extension
            Definition

            A character string as a unique identifier within the scope of the identifier root.

            Control0..0
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelExtension
            32. Observation.classCode
            Comments

            SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:81-451).

            Control1..1
            BindingThe codes SHALL be taken from CDAActClassObservation
            (required to http://hl7.org/cda/stds/core/ValueSet/CDAActClassObservation)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            Fixed ValueOBS
            34. Observation.moodCode
            Comments

            SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:81-452).

            Control1..1
            BindingThe codes SHALL be taken from XActMoodDocumentObservation (2.0.0)
            (required to http://terminology.hl7.org/ValueSet/v3-xActMoodDocumentObservation|2.0.0)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            Fixed ValueEVN
            36. Observation.negationInd
            Control0..1
            Typeboolean(bl: Boolean)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            38. Observation.id
            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
            40. Observation.sdtcCategory
            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
            XML FormatIn the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namecategory.
            42. Observation.code
            Comments

            SHALL contain exactly one [1..1] code (CONF:81-19153).

            Control1..1
            BindingFor example codes, see ObservationType
            (example to http://terminology.hl7.org/ValueSet/v3-ObservationType)
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
            XML FormatThe type of this property is determined using the xsi:typeattribute.
            44. Observation.code.nullFlavor
            Definition

            If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

            Control0..1
            BindingThe codes SHALL be taken from CDANullFlavor
            (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelExceptional Value Detail
            46. Observation.code.code
            Definition

            The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

            ShortPregnancy Status
            Comments

            This code SHALL contain exactly one [1..1] @code="82810-3" Pregnancy Status.

            Control1..1
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode
            Pattern Value82810-3
            48. Observation.code.codeSystem
            Definition

            Specifies the code system that defines the code.

            Comments

            This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.5.4" (CodeSystem: HL7ActCode urn:oid:2.16.840.1.113883.5.4) (CONF:81-26505).

            Control1..1
            Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode System
            Pattern Value2.16.840.1.113883.5.4
            50. Observation.code.codeSystemName
            Definition

            The common name of the coding system.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode System Name
            52. Observation.code.codeSystemVersion
            Definition

            If applicable, a version descriptor defined specifically for the given code system.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode System Version
            54. Observation.code.displayName
            Definition

            A name or title for the code, under which the sending system shows the code value to its users.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelDisplay Name
            56. Observation.code.sdtcValueSet
            Definition

            The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

            Control0..1
            Typestring(oid: ISO Object Identifier)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSet.
            58. Observation.code.sdtcValueSetVersion
            Definition

            The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSetVersion.
            60. Observation.code.originalText
            Definition

            The text or phrase used as the basis for the coding.

            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
            LabelOriginal Text
            62. Observation.code.qualifier
            Definition

            Specifies additional codes that increase the specificity of the the primary code.

            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CR
            LabelQualifier
            64. Observation.code.translation
            Definition

            A set of other concept descriptors that translate this concept descriptor into other code systems.

            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
            XML FormatThe type of this property is determined using the xsi:typeattribute.
            LabelTranslation
            66. Observation.derivationExpr
            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/ST
            68. Observation.text
            ShortSHOULD reference the portion of section narrative text corresponding to this entry
            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
            XML FormatThe type of this property is determined using the xsi:typeattribute.
            70. Observation.text.nullFlavor
            Definition

            If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

            Control0..1
            BindingThe codes SHALL be taken from CDANullFlavor
            (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelExceptional Value Detail
            72. Observation.text.compression
            Definition

            Indicates whether the raw byte data is compressed, and what compression algorithm was used.

            Control0..1
            BindingThe codes SHALL be taken from CDACompressionAlgorithm
            (required to http://hl7.org/cda/stds/core/ValueSet/CDACompressionAlgorithm)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCompression
            74. Observation.text.integrityCheck
            Definition

            The integrity check is a short binary value representing a cryptographically strong checksum that is calculated over the binary data. The purpose of this property, when communicated with a reference is for anyone to validate later whether the reference still resolved to the same data that the reference resolved to when the encapsulated data value with reference was created.

            Control0..1
            Typebase64Binary(bin: Binary Data)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelIntegrity Check
            76. Observation.text.integrityCheckAlgorithm
            Definition

            Specifies the algorithm used to compute the integrityCheck value. The cryptographically strong checksum algorithm Secure Hash Algorithm-1 (SHA-1) is currently the industry standard. It has superseded the MD5 algorithm only a couple of years ago, when certain flaws in the security of MD5 were discovered. Currently the SHA-1 hash algorithm is the default choice for the integrity check algorithm. Note that SHA-256 is also entering widespread usage.

            Control0..1
            BindingThe codes SHALL be taken from IntegrityCheckAlgorithm (2.0.0)
            (required to http://terminology.hl7.org/ValueSet/v3-IntegrityCheckAlgorithm|2.0.0)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelIntegrity Check Algorithm
            78. Observation.text.language
            Definition

            For character based information the language property specifies the human language of the text.

            Control0..1
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelLanguage
            80. Observation.text.mediaType
            Definition

            Identifies the type of the encapsulated data and identifies a method to interpret or render the data.

            Control0..1
            BindingFor example codes, see MediaType
            (example to http://terminology.hl7.org/ValueSet/v3-MediaType)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelMedia Type
            82. Observation.text.representation
            Control0..1
            BindingThe codes SHALL be taken from CDABinaryDataEncoding
            (required to http://hl7.org/cda/stds/core/ValueSet/BinaryDataEncoding)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            84. Observation.text.xmlText
            Definition

            Data that is primarily intended for human interpretation or for further machine processing is outside the scope of HL7. This includes unformatted or formatted written language, multimedia data, or structured information as defined by a different standard (e.g., XML-signatures.)

            ShortAllows for mixed text content. If @representation='B64', this SHALL be a base64binary string.
            Comments

            This element is represented in XML as textual content. The actual name "xmlText" will not appear in a CDA instance.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as unadorned text.
            86. Observation.text.reference
            Definition

            A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data.

            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/TEL
            LabelReference
            Invariantsvalue-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#'))
            88. Observation.text.thumbnail
            Definition

            An abbreviated rendition of the full data. A thumbnail requires significantly fewer resources than the full data, while still maintaining some distinctive similarity with the full data. A thumbnail is typically used with by-reference encapsulated data. It allows a user to select data more efficiently before actually downloading through the reference.

            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
            LabelThumbnail
            90. Observation.statusCode
            Comments

            SHALL contain exactly one [1..1] statusCode (CONF:81-455).

            Control1..1
            BindingThe codes SHALL be taken from ActStatus
            (required to http://terminology.hl7.org/ValueSet/v3-ActStatus)
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
            92. Observation.statusCode.nullFlavor
            Definition

            If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

            Control0..1
            BindingThe codes SHALL be taken from CDANullFlavor
            (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelExceptional Value Detail
            94. Observation.statusCode.code
            Definition

            The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

            Comments

            This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:81-19110).

            Control1..1
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode
            Fixed Valuecompleted
            96. Observation.statusCode.codeSystem
            Definition

            Specifies the code system that defines the code.

            Control0..0
            Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode System
            98. Observation.statusCode.codeSystemName
            Definition

            The common name of the coding system.

            Control0..0
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode System Name
            100. Observation.statusCode.codeSystemVersion
            Definition

            If applicable, a version descriptor defined specifically for the given code system.

            Control0..0
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode System Version
            102. Observation.statusCode.displayName
            Definition

            A name or title for the code, under which the sending system shows the code value to its users.

            Control0..0
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelDisplay Name
            104. Observation.statusCode.sdtcValueSet
            Definition

            The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

            Control0..1
            Typestring(oid: ISO Object Identifier)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSet.
            106. Observation.statusCode.sdtcValueSetVersion
            Definition

            The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSetVersion.
            108. Observation.statusCode.originalText
            Definition

            The text or phrase used as the basis for the coding.

            Control0..0
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
            LabelOriginal Text
            110. Observation.statusCode.qualifier
            Definition

            Specifies additional codes that increase the specificity of the the primary code.

            Control0..0
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CR
            LabelQualifier
            112. Observation.statusCode.translation
            Definition

            A set of other concept descriptors that translate this concept descriptor into other code systems.

            Control0..0
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
            XML FormatThe type of this property is determined using the xsi:typeattribute.
            LabelTranslation
            114. Observation.effectiveTime
            Comments

            SHALL contain exactly one [1..1] effectiveTime.

            Control1..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/IVL-TS
            Invariantsvalue-only: Interval fields SHALL NOT be present ((low | high | width | center).empty())
            116. Observation.effectiveTime.nullFlavor
            Definition

            If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

            Control0..1
            BindingThe codes SHALL be taken from CDANullFlavor
            (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelExceptional Value Detail
            118. Observation.effectiveTime.value
            Definition

            A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression.

            Shortvalue should be used instead of low/high
            Control0..1
            TypedateTime(ts: Point in Time)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Date FormatYYYYMMDDHHMMSS.UUUU[+|-ZZzz]
            XML FormatIn the XML format, this property is represented as an attribute.
            120. Observation.effectiveTime.operator
            Definition

            A code specifying whether the set component is included (union) or excluded (set-difference) from the set, or other set operations with the current set component and the set as constructed from the representation stream up to the current point.

            Control0..1
            BindingThe codes SHALL be taken from CDASetOperator
            (required to http://hl7.org/cda/stds/core/ValueSet/CDASetOperator)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            Default ValueI
            122. Observation.effectiveTime.low
            Definition

            This is the low limit of the interval.

            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/IVXB-TS
            LabelLow Boundary
            124. Observation.effectiveTime.center
            Definition

            The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values.

            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/TS
            LabelCentral Value
            126. Observation.effectiveTime.width
            Definition

            The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived.

            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/PQ
            LabelWidth
            128. Observation.effectiveTime.high
            Definition

            This is the high limit of the interval.

            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/IVXB-TS
            LabelHigh Boundary
            130. Observation.priorityCode
            Control0..1
            BindingFor example codes, see ActPriority
            (example to http://terminology.hl7.org/ValueSet/v3-ActPriority)
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
            132. Observation.repeatNumber
            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/IVL-INT
            134. Observation.languageCode
            Control0..1
            BindingThe codes SHALL be taken from AllLanguages
            (required to http://hl7.org/fhir/ValueSet/all-languages)
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
            136. Observation.value
            Comments

            SHALL contain exactly one [1..1] value with @xsi:type="CD".

            Control1..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
            XML FormatThe type of this property is determined using the xsi:typeattribute.
            138. Observation.value.nullFlavor
            Definition

            If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

            Control0..0
            BindingThe codes SHALL be taken from CDANullFlavor
            (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelExceptional Value Detail
            140. Observation.value.code
            Definition

            The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

            Control1..1
            BindingThe codes SHALL be taken from Pregnancy Status Observation .
            (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1240.12)
            Typecode(cs: Coded Simple Value)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode
            142. Observation.value.codeSystem
            Definition

            Specifies the code system that defines the code.

            Control0..1
            Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode System
            144. Observation.value.codeSystemName
            Definition

            The common name of the coding system.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode System Name
            146. Observation.value.codeSystemVersion
            Definition

            If applicable, a version descriptor defined specifically for the given code system.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelCode System Version
            148. Observation.value.displayName
            Definition

            A name or title for the code, under which the sending system shows the code value to its users.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            LabelDisplay Name
            150. Observation.value.sdtcValueSet
            Definition

            The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

            Control0..1
            Typestring(oid: ISO Object Identifier)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSet.
            152. Observation.value.sdtcValueSetVersion
            Definition

            The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

            Control0..1
            Typestring(st: Character String)
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSetVersion.
            154. Observation.value.originalText
            Definition

            The text or phrase used as the basis for the coding.

            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
            LabelOriginal Text
            156. Observation.value.qualifier
            Definition

            Specifies additional codes that increase the specificity of the the primary code.

            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CR
            LabelQualifier
            158. Observation.value.translation
            Definition

            A set of other concept descriptors that translate this concept descriptor into other code systems.

            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
            XML FormatThe type of this property is determined using the xsi:typeattribute.
            LabelTranslation
            160. Observation.interpretationCode
            Control0..*
            BindingThe codes SHALL be taken from CDAObservationInterpretation
            (required to http://hl7.org/cda/stds/core/ValueSet/CDAObservationInterpretation)
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
            162. Observation.methodCode
            Control0..*
            BindingFor example codes, see ObservationMethod
            (example to http://terminology.hl7.org/ValueSet/v3-ObservationMethod)
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
            164. Observation.targetSiteCode
            Definition

            Drawn from concept domain ActSite

            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
            166. Observation.subject
            Control0..1
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/Subject
            168. Observation.specimen
            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/Specimen
            170. Observation.performer
            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/Performer2
            172. Observation.author
            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/Author
            174. Observation.informant
            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/Informant
            176. Observation.participant
            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/Participant2
            178. Observation.entryRelationship
            Control0..*
            Typehttp://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
            SlicingThis element introduces a set of slices on Observation.entryRelationship. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • profile @ observation
            • 180. Observation.entryRelationship:estimatedDateofDelivery
              Slice NameestimatedDateofDelivery
              Comments

              MAY contain zero or one [0..1] entryRelationship (CONF:81-458) such that it

              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
              182. Observation.entryRelationship:estimatedDateofDelivery.nullFlavor
              Definition

              If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

              Control0..1
              BindingThe codes SHALL be taken from CDANullFlavor
              (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
              Typecode(cs: Coded Simple Value)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelExceptional Value Detail
              184. Observation.entryRelationship:estimatedDateofDelivery.realmCode
              Definition

              When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question

              Control0..*
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
              186. Observation.entryRelationship:estimatedDateofDelivery.typeId
              Definition

              When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.

              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
              188. Observation.entryRelationship:estimatedDateofDelivery.typeId.nullFlavor
              Definition

              If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

              Control0..1
              BindingThe codes SHALL be taken from CDANullFlavor
              (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
              Typecode(cs: Coded Simple Value)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelExceptional Value Detail
              190. Observation.entryRelationship:estimatedDateofDelivery.typeId.assigningAuthorityName
              Definition

              A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

              Control0..1
              Typestring(st: Character String)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelAssigning Authority Name
              192. Observation.entryRelationship:estimatedDateofDelivery.typeId.displayable
              Definition

              Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

              Control0..1
              Typeboolean(bl: Boolean)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelDisplayable
              194. Observation.entryRelationship:estimatedDateofDelivery.typeId.root
              Definition

              Identifies the type as an HL7 Registered model

              Control1..1
              Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelRoot
              Fixed Value2.16.840.1.113883.1.3
              196. Observation.entryRelationship:estimatedDateofDelivery.typeId.extension
              Definition

              A character string as a unique identifier within the scope of the identifier root.

              Control1..1
              Typestring(st: Character String)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelExtension
              198. Observation.entryRelationship:estimatedDateofDelivery.templateId
              Definition

              When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

              Control0..*
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
              200. Observation.entryRelationship:estimatedDateofDelivery.typeCode
              Comments

              SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:81-459).

              Control1..1
              BindingThe codes SHALL be taken from x_ActRelationshipEntryRelationship
              (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship)
              Typecode(cs: Coded Simple Value)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              Fixed ValueREFR
              202. Observation.entryRelationship:estimatedDateofDelivery.inversionInd
              Definition

              The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed.

              Control0..1
              Typeboolean(bl: Boolean)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              204. Observation.entryRelationship:estimatedDateofDelivery.contextConductionInd
              Definition

              The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context.

              Control0..1
              Typeboolean(bl: Boolean)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              Default Valuetrue
              206. Observation.entryRelationship:estimatedDateofDelivery.negationInd
              Control0..1
              Typeboolean(bl: Boolean)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              208. Observation.entryRelationship:estimatedDateofDelivery.sequenceNumber
              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/INT
              210. Observation.entryRelationship:estimatedDateofDelivery.seperatableInd
              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/BL
              212. Observation.entryRelationship:estimatedDateofDelivery.act
              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/Act
              214. Observation.entryRelationship:estimatedDateofDelivery.encounter
              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/Encounter
              216. Observation.entryRelationship:estimatedDateofDelivery.observation
              Definition

              Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type.

              ShortBase for all types and resources
              Comments

              SHALL contain exactly one [1..1] observationEstimated Date of Delivery (identifier: urn:oid:2.16.840.1.113883.10.20.15.3.1) (CONF:81-15584).

              Control1..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/Observation(Estimated Date of Delivery)
              Is Modifierfalse
              Invariantsshould-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())
              218. Observation.entryRelationship:estimatedDateofDelivery.observationMedia
              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia
              220. Observation.entryRelationship:estimatedDateofDelivery.organizer
              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/Organizer
              222. Observation.entryRelationship:estimatedDateofDelivery.procedure
              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/Procedure
              224. Observation.entryRelationship:estimatedDateofDelivery.regionOfInterest
              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest
              226. Observation.entryRelationship:estimatedDateofDelivery.substanceAdministration
              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration
              228. Observation.entryRelationship:estimatedDateofDelivery.supply
              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/Supply
              230. Observation.reference
              Control0..*
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/Reference
              232. Observation.precondition
              Control0..*
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/Precondition
              234. Observation.sdtcPrecondition2
              Control0..*
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/Precondition2
              XML FormatIn the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual nameprecondition2.
              236. Observation.referenceRange
              Definition

              Relates an Observation to the ObservationRange class, where the expected range of values for a particular observation can be specified.

              Control0..*
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/InfrastructureRoot
              238. Observation.referenceRange.nullFlavor
              Definition

              If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

              Control0..1
              BindingThe codes SHALL be taken from CDANullFlavor
              (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
              Typecode(cs: Coded Simple Value)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelExceptional Value Detail
              240. Observation.referenceRange.realmCode
              Definition

              When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question

              Control0..*
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
              242. Observation.referenceRange.typeId
              Definition

              When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.

              Control0..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
              244. Observation.referenceRange.typeId.nullFlavor
              Definition

              If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

              Control0..1
              BindingThe codes SHALL be taken from CDANullFlavor
              (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor)
              Typecode(cs: Coded Simple Value)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelExceptional Value Detail
              246. Observation.referenceRange.typeId.assigningAuthorityName
              Definition

              A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

              Control0..1
              Typestring(st: Character String)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelAssigning Authority Name
              248. Observation.referenceRange.typeId.displayable
              Definition

              Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

              Control0..1
              Typeboolean(bl: Boolean)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelDisplayable
              250. Observation.referenceRange.typeId.root
              Definition

              Identifies the type as an HL7 Registered model

              Control1..1
              Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelRoot
              Fixed Value2.16.840.1.113883.1.3
              252. Observation.referenceRange.typeId.extension
              Definition

              A character string as a unique identifier within the scope of the identifier root.

              Control1..1
              Typestring(st: Character String)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              LabelExtension
              254. Observation.referenceRange.templateId
              Definition

              When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

              Control0..*
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
              256. Observation.referenceRange.typeCode
              Control0..1
              BindingThe codes SHALL be taken from CDAActRelationshipType
              (required to http://hl7.org/cda/stds/core/ValueSet/CDAActRelationshipType)
              Typecode(cs: Coded Simple Value)
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              Fixed ValueREFV
              258. Observation.referenceRange.observationRange
              Control1..1
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/ObservationRange
              260. Observation.sdtcInFulfillmentOf1
              Control0..*
              Typehttp://hl7.org/cda/stds/core/StructureDefinition/InFulfillmentOf1
              XML FormatIn the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual nameinFulfillmentOf1.