HL7 Czech PS Implementation Guide
0.0.1 - ci-build Czechia flag

HL7 Czech PS Implementation Guide, published by HL7 Czech Republic. This guide is not an authorized publication; it is the continuous build for version 0.0.1 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7-cz/ps/ and changes regularly. See the Directory of published versions

Resource Profile: Procedure: Obligations - Detailed Descriptions

Draft as of 2026-11-19

Definitions for the cz-procedure-obl-ps resource profile

See the documentation on how to interpret the contents of this table

0. Procedure
Definition

An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

ShortAn action that is being or was performed on a patient
Control0..*
Is Modifierfalse
Impose ProfileThis profile also requires that the instance also conform this additional profile:
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Procedure.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Procedure.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortTextual representation of the procedureText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Obligations
    ObligationsActor
    SHALL:able-to-populateCreator_L3
    SHALL:displayConsumer_L3
    Summaryfalse
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Procedure.extension:recorded
    Slice Namerecorded
    Definition

    R5: Procedure.recorded (new:dateTime)

    ShortDate when the procedure was recorded
    Comments

    Element Procedure.recorded has a context of Procedure based on following the parent source element upwards and mapping to Procedure. Element Procedure.recorded has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: When the procedure was first captured in the subject's record (new)) (Extension Type: dateTime)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Procedure.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Procedure.status
    Definition

    A code specifying the state of the procedure. Generally, this will be the in-progress or completed state.

    ShortThe status of the procedurepreparation | in-progress | not-done | on-hold | stopped | completed | entered-in-error | unknown
    Comments

    The "unknown" code is not to be used to convey other statuses. The "unknown" code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the procedure.

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from EventStatushttp://hl7.org/fhir/ValueSet/event-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/event-status|4.0.1)

    A code specifying the state of the procedure.

    Typecode
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Procedure.code
    Definition

    Identification of the procedure or recording of "absence of relevant procedures" or of "procedures unknown".


    The specific procedure that is performed. Use text if the exact nature of the procedure cannot be coded (e.g. "Laparoscopic Appendectomy").

    ShortIdentification of the procedure
    Control10..1
    BindingThe codes SHOULD be taken from For example codes, see ProceduresUvIps (2.0.1)http://hl7.org/fhir/ValueSet/procedure-code|4.0.1
    (preferred to http://hl7.org/fhir/uv/ips/ValueSet/procedures-uv-ips|2.0.1)
    TypeCodeableConcept(Codeable Concept (IPS) The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
    Is Modifierfalse
    Obligations
      ObligationsActorSource
      SHALL:populate-if-knownCreator (IPS)from Procedure (EPS)
      SHALL:handleConsumer (IPS)from Procedure (EPS)
      SHOULD:displayConsumer (IPS)from Procedure (EPS)
      SHALL:populate-if-known & SHALL:populate-if-knownCreator (IPS)Creator_L3from Procedure (EPS)
      SHALL:handle & SHALL:displayConsumer (IPS)Consumer_L3from Procedure (EPS)
      SHOULD:displayConsumer (IPS)from Procedure (EPS)
      Summarytrue
      Requirements

      0..1 to account for primarily narrative only resources.

      Alternate Namestype
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Procedure.subject
      Definition

      The person, animal or group on which the procedure was performed.

      ShortWho the procedure was performed on
      Control1..1
      TypeReference(Patient (EU core), Patient, Group)
      Is Modifierfalse
      Obligations
        ObligationsActorSource
        SHALL:populate-if-knownCreator (IPS)from Procedure (EPS)
        SHALL:handleConsumer (IPS)from Procedure (EPS)
        SHOULD:displayConsumer (IPS)from Procedure (EPS)
        Summarytrue
        Alternate Namespatient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. Procedure.subject.reference
        Definition

        A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

        ShortLiteral reference, Relative, internal or absolute URL
        Comments

        Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

        Control10..1
        This element is affected by the following invariants: ref-1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Obligations
          ObligationsActorSource
          SHALL:populate-if-knownCreator (IPS)from Procedure (EPS)
          SHALL:handleConsumer (IPS)from Procedure (EPS)
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          18. Procedure.performed[x]
          Definition

          Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

          ShortWhen the procedure was performed
          Comments

          Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

          Control10..1
          TypeChoice of: dateTime, Period, string, Age, Range
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Obligations
            ObligationsActorSource
            SHALL:populate-if-knownCreator (IPS)from Procedure (EPS)
            SHALL:handleConsumer (IPS)from Procedure (EPS)
            SHOULD:displayConsumer (IPS)from Procedure (EPS)
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Procedure.performed[x]. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
            • type @ $this

            Slicing Note: Other type slices that contain no new information are not shown in this view

            20. Procedure.performed[x]:performedDateTime
            Slice NameperformedDateTime
            Definition

            Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

            ShortWhen the procedure was performed
            Comments

            Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

            Control0..1
            TypedateTime, string, Period, Range, Age
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Obligations
              ObligationsActorSource
              SHOULD:able-to-populateCreator (IPS)from Procedure (EPS)
              SHALL:handleConsumer (IPS)from Procedure (EPS)
              SHOULD:displayConsumer (IPS)from Procedure (EPS)
              SHOULD:able-to-populate & SHALL:able-to-populateCreator (IPS)Creator_L3from Procedure (EPS)
              SHALL:handle & SHALL:displayConsumer (IPS)Consumer_L3from Procedure (EPS)
              SHOULD:displayConsumer (IPS)from Procedure (EPS)
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              26. Procedure.reasonCode
              Definition

              The coded reason why the procedure was performed. This may be a coded entity of some type, or may simply be present as text.

              ShortWhy the procedure was performed (code)Coded reason procedure performed
              Comments

              Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

              Control0..*
              BindingFor example codes, see ProcedureReasonCodeshttp://hl7.org/fhir/ValueSet/procedure-reason|4.0.1
              (example to http://hl7.org/fhir/ValueSet/procedure-reason|4.0.1)

              A code that identifies the reason a procedure is required.

              TypeCodeableConcept
              Is Modifierfalse
              Obligations
                ObligationsActor
                SHALL:able-to-populateCreator_L3
                SHALL:displayConsumer_L3
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. Procedure.reasonReference
                Definition

                The justification of why the procedure was performed.

                ShortWhy the procedure was performed (details)The justification that the procedure was performed
                Comments

                It is possible for a procedure to be a reason (such as C-Section) for another procedure (such as an epidural). Other examples include endoscopy for dilatation and biopsy (a combination of diagnostic and therapeutic use). Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

                Control0..*
                TypeReference(Condition (CZ core), Observation, Procedure (CZ PS), DiagnosticReport (CZ core), DocumentReference, Condition, Observation, Procedure, DiagnosticReport, DocumentReference)
                Is Modifierfalse
                Obligations
                  ObligationsActor
                  SHALL:able-to-populateCreator_L3
                  SHALL:displayConsumer_L3
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  30. Procedure.outcome
                  Definition

                  The outcome of the procedure - did it resolve the reasons for the procedure being performed?

                  ShortOutcome of the procedureThe result of procedure
                  Comments

                  If outcome contains narrative text only, it can be captured using the CodeableConcept.text.

                  Control0..1
                  BindingFor example codes, see ProcedureOutcomeCodes(SNOMEDCT)http://hl7.org/fhir/ValueSet/procedure-outcome|4.0.1
                  (example to http://hl7.org/fhir/ValueSet/procedure-outcome|4.0.1)

                  An outcome of a procedure - whether it was resolved or otherwise.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Obligations
                    ObligationsActor
                    SHALL:populate-if-knownCreator_L3
                    SHALL:displayConsumer_L3
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    32. Procedure.complication
                    Definition

                    Any complications that occurred during the procedure, or in the immediate post-performance period. These are generally tracked separately from the notes, which will typically describe the procedure itself rather than any 'post procedure' issues.

                    ShortComplications that occurred during the procedure (code)Complication following the procedure
                    Comments

                    If complications are only expressed by the narrative text, they can be captured using the CodeableConcept.text.

                    Control0..*
                    BindingFor example codes, see Condition/Problem/DiagnosisCodeshttp://hl7.org/fhir/ValueSet/condition-code|4.0.1
                    (example to http://hl7.org/fhir/ValueSet/condition-code|4.0.1)

                    Codes describing complications that resulted from a procedure.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Obligations
                      ObligationsActor
                      SHALL:populate-if-knownCreator_L3
                      SHALL:displayConsumer_L3
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      34. Procedure.complicationDetail
                      Definition

                      Any complications that occurred during the procedure, or in the immediate post-performance period.

                      ShortComplications that occurred during the procedure (details)A condition that is a result of the procedure
                      Control0..*
                      TypeReference(Condition (EU core), Condition)
                      Is Modifierfalse
                      Obligations
                        ObligationsActor
                        SHALL:populate-if-knownCreator_L3
                        SHALL:displayConsumer_L3
                        Summaryfalse
                        Requirements

                        This is used to document a condition that is a result of the procedure, not the condition that was the reason for the procedure.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        36. Procedure.focalDevice
                        Definition

                        A device that is implanted, removed or otherwise manipulated (calibration, battery replacement, fitting a prosthesis, attaching a wound-vac, etc.) as a focal portion of the Procedure.

                        ShortDevice implanted, removed or otherwise manipulatedManipulated, implanted, or removed device
                        Control0..*
                        TypeBackboneElement
                        Is Modifierfalse
                        Obligations
                          ObligationsActor
                          SHALL:populate-if-knownCreator_L3
                          SHALL:displayConsumer_L3
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          38. Procedure.focalDevice.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          40. Procedure.focalDevice.manipulated
                          Definition

                          The device that was manipulated (changed) during the procedure.

                          ShortDevice that was changed
                          Control1..1
                          TypeReference(Device)
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                          See the documentation on how to interpret the contents of this table

                          0. Procedure
                          Impose ProfileThis profile also requires that the instance also conform this additional profile:
                          2. Procedure.text
                          Obligations
                            ObligationsActor
                            SHALL:able-to-populateCreator_L3
                            SHALL:displayConsumer_L3
                            4. Procedure.code
                            Obligations
                              ObligationsActorSource
                              SHALL:populate-if-known & SHALL:populate-if-knownCreator (IPS)Creator_L3from Procedure (EPS)
                              SHALL:handle & SHALL:displayConsumer (IPS)Consumer_L3from Procedure (EPS)
                              SHOULD:displayConsumer (IPS)from Procedure (EPS)
                              6. Procedure.performed[x]:performedDateTime
                              Slice NameperformedDateTime
                              TypedateTime
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Obligations
                                ObligationsActorSource
                                SHOULD:able-to-populate & SHALL:able-to-populateCreator (IPS)Creator_L3from Procedure (EPS)
                                SHALL:handle & SHALL:displayConsumer (IPS)Consumer_L3from Procedure (EPS)
                                SHOULD:displayConsumer (IPS)from Procedure (EPS)
                                8. Procedure.reasonCode
                                Obligations
                                  ObligationsActor
                                  SHALL:able-to-populateCreator_L3
                                  SHALL:displayConsumer_L3
                                  10. Procedure.reasonReference
                                  Obligations
                                    ObligationsActor
                                    SHALL:able-to-populateCreator_L3
                                    SHALL:displayConsumer_L3
                                    12. Procedure.outcome
                                    Obligations
                                      ObligationsActor
                                      SHALL:populate-if-knownCreator_L3
                                      SHALL:displayConsumer_L3
                                      14. Procedure.complication
                                      Obligations
                                        ObligationsActor
                                        SHALL:populate-if-knownCreator_L3
                                        SHALL:displayConsumer_L3
                                        16. Procedure.complicationDetail
                                        Obligations
                                          ObligationsActor
                                          SHALL:populate-if-knownCreator_L3
                                          SHALL:displayConsumer_L3
                                          18. Procedure.focalDevice
                                          Obligations
                                            ObligationsActor
                                            SHALL:populate-if-knownCreator_L3
                                            SHALL:displayConsumer_L3

                                            See the documentation on how to interpret the contents of this table

                                            0. Procedure
                                            Definition

                                            An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

                                            ShortAn action that is being or was performed on a patient
                                            Control0..*
                                            Is Modifierfalse
                                            Impose ProfileThis profile also requires that the instance also conform this additional profile:
                                            Summaryfalse
                                            Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                                            dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                                            dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                                            dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                                            dom-6: A resource should have narrative for robust management (text.`div`.exists())
                                            2. Procedure.id
                                            Definition

                                            The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                                            ShortLogical id of this artifact
                                            Comments

                                            The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                                            Control0..1
                                            Typeid
                                            Is Modifierfalse
                                            Summarytrue
                                            4. Procedure.meta
                                            Definition

                                            The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                                            ShortMetadata about the resource
                                            Control0..1
                                            TypeMeta
                                            Is Modifierfalse
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            6. Procedure.implicitRules
                                            Definition

                                            A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                                            ShortA set of rules under which this content was created
                                            Comments

                                            Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                                            Control0..1
                                            Typeuri
                                            Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            8. Procedure.language
                                            Definition

                                            The base language in which the resource is written.

                                            ShortLanguage of the procedure
                                            Comments

                                            Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                                            Control0..1
                                            BindingThe codes SHOULD be taken from CommonLanguages
                                            (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

                                            A human language.

                                            Additional BindingsPurpose
                                            AllLanguagesMax Binding
                                            Typecode
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summaryfalse
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            10. Procedure.text
                                            Definition

                                            A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                                            ShortTextual representation of the procedure
                                            Comments

                                            Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                                            Control0..1
                                            TypeNarrative
                                            Is Modifierfalse
                                            Obligations
                                              ObligationsActor
                                              SHALL:able-to-populateCreator_L3
                                              SHALL:displayConsumer_L3
                                              Summaryfalse
                                              Alternate Namesnarrative, html, xhtml, display
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              12. Procedure.contained
                                              Definition

                                              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                                              ShortContained, inline Resources
                                              Comments

                                              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                                              Control0..*
                                              TypeResource
                                              Is Modifierfalse
                                              Summaryfalse
                                              Alternate Namesinline resources, anonymous resources, contained resources
                                              14. Procedure.extension
                                              Definition

                                              An Extension

                                              ShortExtension
                                              Control0..*
                                              TypeExtension
                                              Is Modifierfalse
                                              Summaryfalse
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              SlicingThis element introduces a set of slices on Procedure.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                                              • value @ url
                                              16. Procedure.extension:recorded
                                              Slice Namerecorded
                                              Definition

                                              R5: Procedure.recorded (new:dateTime)

                                              ShortDate when the procedure was recorded
                                              Comments

                                              Element Procedure.recorded has a context of Procedure based on following the parent source element upwards and mapping to Procedure. Element Procedure.recorded has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

                                              Control0..1
                                              This element is affected by the following invariants: ele-1
                                              TypeExtension(R5: When the procedure was first captured in the subject's record (new)) (Extension Type: dateTime)
                                              Is Modifierfalse
                                              Summaryfalse
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              18. Procedure.modifierExtension
                                              Definition

                                              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                              ShortExtensions that cannot be ignored
                                              Comments

                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                              Control0..*
                                              TypeExtension
                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                                              Summaryfalse
                                              Requirements

                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                              Alternate Namesextensions, user content
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              20. Procedure.identifier
                                              Definition

                                              Business identifiers assigned to this procedure by the performer or other systems which remain constant as the resource is updated and is propagated from server to server.

                                              ShortIdentifier for the procedure
                                              Comments

                                              This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and Person resource instances might share the same social insurance number.

                                              NoteThis is a business identifier, not a resource identifier (see discussion)
                                              Control0..*
                                              TypeIdentifier
                                              Is Modifierfalse
                                              Summarytrue
                                              Requirements

                                              Allows identification of the procedure as it is known by various participating systems and in a way that remains consistent across servers.

                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              22. Procedure.instantiatesCanonical
                                              Definition

                                              The URL pointing to a FHIR-defined protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

                                              ShortInstantiates FHIR protocol or definition
                                              Control0..*
                                              Typecanonical(PlanDefinition, ActivityDefinition, Measure, OperationDefinition, Questionnaire)
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              24. Procedure.instantiatesUri
                                              Definition

                                              The URL pointing to an externally maintained protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

                                              ShortInstantiates external protocol or definition
                                              Comments

                                              This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier.

                                              Control0..*
                                              Typeuri
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              26. Procedure.basedOn
                                              Definition

                                              A reference to a resource that contains details of the request for this procedure.

                                              ShortA request for this procedure
                                              Control0..*
                                              TypeReference(CarePlan, ServiceRequest)
                                              Is Modifierfalse
                                              Summarytrue
                                              Alternate Namesfulfills
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              28. Procedure.partOf
                                              Definition

                                              A larger event of which this particular procedure is a component or step.

                                              ShortPart of referenced event
                                              Comments

                                              The MedicationAdministration resource has a partOf reference to Procedure, but this is not a circular reference. For example, the anesthesia MedicationAdministration is part of the surgical Procedure (MedicationAdministration.partOf = Procedure). For example, the procedure to insert the IV port for an IV medication administration is part of the medication administration (Procedure.partOf = MedicationAdministration).

                                              Control0..*
                                              TypeReference(Procedure, Observation, MedicationAdministration)
                                              Is Modifierfalse
                                              Summarytrue
                                              Alternate Namescontainer
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              30. Procedure.status
                                              Definition

                                              A code specifying the state of the procedure. Generally, this will be the in-progress or completed state.

                                              ShortThe status of the procedure
                                              Comments

                                              The "unknown" code is not to be used to convey other statuses. The "unknown" code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the procedure.

                                              This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

                                              Control1..1
                                              BindingThe codes SHALL be taken from EventStatus
                                              (required to http://hl7.org/fhir/ValueSet/event-status|4.0.1)

                                              A code specifying the state of the procedure.

                                              Typecode
                                              Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              32. Procedure.statusReason
                                              Definition

                                              Captures the reason for the current state of the procedure.

                                              ShortReason for current status
                                              Comments

                                              This is generally only used for "exception" statuses such as "not-done", "suspended" or "aborted". The reason for performing the event at all is captured in reasonCode, not here.

                                              Control0..1
                                              BindingFor example codes, see ProcedureNotPerformedReason(SNOMED-CT)
                                              (example to http://hl7.org/fhir/ValueSet/procedure-not-performed-reason|4.0.1)

                                              A code that identifies the reason a procedure was not performed.

                                              TypeCodeableConcept
                                              Is Modifierfalse
                                              Summarytrue
                                              Alternate NamesSuspended Reason, Cancelled Reason
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              34. Procedure.category
                                              Definition

                                              A code that classifies the procedure for searching, sorting and display purposes (e.g. "Surgical Procedure").

                                              ShortClassification of the procedure
                                              Control0..1
                                              BindingFor example codes, see ProcedureCategoryCodes(SNOMEDCT)
                                              (example to http://hl7.org/fhir/ValueSet/procedure-category|4.0.1)

                                              A code that classifies a procedure for searching, sorting and display purposes.

                                              TypeCodeableConcept
                                              Is Modifierfalse
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              36. Procedure.code
                                              Definition

                                              Identification of the procedure or recording of "absence of relevant procedures" or of "procedures unknown".

                                              ShortIdentification of the procedure
                                              Control1..1
                                              BindingThe codes SHOULD be taken from ProceduresUvIps (2.0.1)
                                              (preferred to http://hl7.org/fhir/uv/ips/ValueSet/procedures-uv-ips|2.0.1)
                                              TypeCodeableConcept(Codeable Concept (IPS) The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
                                              Is Modifierfalse
                                              Obligations
                                                ObligationsActorSource
                                                SHALL:populate-if-knownCreator (IPS)from Procedure (EPS)
                                                SHALL:handleConsumer (IPS)from Procedure (EPS)
                                                SHOULD:displayConsumer (IPS)from Procedure (EPS)
                                                SHALL:populate-if-known & SHALL:populate-if-knownCreator (IPS)Creator_L3from Procedure (EPS)
                                                SHALL:handle & SHALL:displayConsumer (IPS)Consumer_L3from Procedure (EPS)
                                                SHOULD:displayConsumer (IPS)from Procedure (EPS)
                                                Summarytrue
                                                Requirements

                                                0..1 to account for primarily narrative only resources.

                                                Alternate Namestype
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                38. Procedure.subject
                                                Definition

                                                The person, animal or group on which the procedure was performed.

                                                ShortWho the procedure was performed on
                                                Control1..1
                                                TypeReference(Patient (EU core))
                                                Is Modifierfalse
                                                Obligations
                                                  ObligationsActorSource
                                                  SHALL:populate-if-knownCreator (IPS)from Procedure (EPS)
                                                  SHALL:handleConsumer (IPS)from Procedure (EPS)
                                                  SHOULD:displayConsumer (IPS)from Procedure (EPS)
                                                  Summarytrue
                                                  Alternate Namespatient
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  40. Procedure.subject.id
                                                  Definition

                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                  ShortUnique id for inter-element referencing
                                                  Control0..1
                                                  Typestring
                                                  Is Modifierfalse
                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                  Summaryfalse
                                                  42. Procedure.subject.extension
                                                  Definition

                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                  ShortAdditional content defined by implementations
                                                  Comments

                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                  Control0..*
                                                  TypeExtension
                                                  Is Modifierfalse
                                                  Summaryfalse
                                                  Alternate Namesextensions, user content
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                  SlicingThis element introduces a set of slices on Procedure.subject.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                                                  • value @ url
                                                  44. Procedure.subject.reference
                                                  Definition

                                                  A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                                                  ShortLiteral reference, Relative, internal or absolute URL
                                                  Comments

                                                  Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                                                  Control1..1
                                                  This element is affected by the following invariants: ref-1
                                                  Typestring
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Obligations
                                                    ObligationsActorSource
                                                    SHALL:populate-if-knownCreator (IPS)from Procedure (EPS)
                                                    SHALL:handleConsumer (IPS)from Procedure (EPS)
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    46. Procedure.subject.type
                                                    Definition

                                                    The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                                                    The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                                                    ShortType the reference refers to (e.g. "Patient")
                                                    Comments

                                                    This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                                                    Control0..1
                                                    BindingUnless not suitable, these codes SHALL be taken from ResourceType
                                                    (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                                                    Aa resource (or, for logical models, the URI of the logical model).

                                                    Typeuri
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    48. Procedure.subject.identifier
                                                    Definition

                                                    An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                                                    ShortLogical reference, when literal reference is not known
                                                    Comments

                                                    When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                                                    When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                                                    Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                                                    Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                                                    NoteThis is a business identifier, not a resource identifier (see discussion)
                                                    Control0..1
                                                    TypeIdentifier
                                                    Is Modifierfalse
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    50. Procedure.subject.display
                                                    Definition

                                                    Plain text narrative that identifies the resource in addition to the resource reference.

                                                    ShortText alternative for the resource
                                                    Comments

                                                    This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                                                    Control0..1
                                                    Typestring
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    52. Procedure.encounter
                                                    Definition

                                                    The Encounter during which this Procedure was created or performed or to which the creation of this record is tightly associated.

                                                    ShortEncounter created as part of
                                                    Comments

                                                    This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

                                                    Control0..1
                                                    TypeReference(Encounter)
                                                    Is Modifierfalse
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    54. Procedure.performed[x]
                                                    Definition

                                                    Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

                                                    ShortWhen the procedure was performed
                                                    Comments

                                                    Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

                                                    Control1..1
                                                    TypeChoice of: dateTime, Period, string, Age, Range
                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Obligations
                                                      ObligationsActorSource
                                                      SHALL:populate-if-knownCreator (IPS)from Procedure (EPS)
                                                      SHALL:handleConsumer (IPS)from Procedure (EPS)
                                                      SHOULD:displayConsumer (IPS)from Procedure (EPS)
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      SlicingThis element introduces a set of slices on Procedure.performed[x]. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
                                                      • type @ $this

                                                      Slicing Note: Other type slices that contain no new information are not shown in this view

                                                      56. Procedure.performed[x]:performedDateTime
                                                      Slice NameperformedDateTime
                                                      Definition

                                                      Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

                                                      ShortWhen the procedure was performed
                                                      Comments

                                                      Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

                                                      Control0..1
                                                      TypedateTime
                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Obligations
                                                        ObligationsActorSource
                                                        SHOULD:able-to-populateCreator (IPS)from Procedure (EPS)
                                                        SHALL:handleConsumer (IPS)from Procedure (EPS)
                                                        SHOULD:displayConsumer (IPS)from Procedure (EPS)
                                                        SHOULD:able-to-populate & SHALL:able-to-populateCreator (IPS)Creator_L3from Procedure (EPS)
                                                        SHALL:handle & SHALL:displayConsumer (IPS)Consumer_L3from Procedure (EPS)
                                                        SHOULD:displayConsumer (IPS)from Procedure (EPS)
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        62. Procedure.recorder
                                                        Definition

                                                        Individual who recorded the record and takes responsibility for its content.

                                                        ShortThe person or organization who recorded the procedure
                                                        Control0..1
                                                        TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole)
                                                        Is Modifierfalse
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        64. Procedure.asserter
                                                        Definition

                                                        Individual who is making the procedure statement.

                                                        ShortThe person or organization who asserts the procedure
                                                        Control0..1
                                                        TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole)
                                                        Is Modifierfalse
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        66. Procedure.performer
                                                        Definition

                                                        Limited to "real" people rather than equipment.

                                                        ShortThe people who performed the procedure
                                                        Control0..*
                                                        TypeBackboneElement
                                                        Is Modifierfalse
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        68. Procedure.performer.id
                                                        Definition

                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                        ShortUnique id for inter-element referencing
                                                        Control0..1
                                                        Typestring
                                                        Is Modifierfalse
                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                        Summaryfalse
                                                        70. Procedure.performer.extension
                                                        Definition

                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                        ShortAdditional content defined by implementations
                                                        Comments

                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                        Control0..*
                                                        TypeExtension
                                                        Is Modifierfalse
                                                        Summaryfalse
                                                        Alternate Namesextensions, user content
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                        72. Procedure.performer.modifierExtension
                                                        Definition

                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                        Comments

                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                        Control0..*
                                                        TypeExtension
                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                        Summarytrue
                                                        Requirements

                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                        Alternate Namesextensions, user content, modifiers
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                        74. Procedure.performer.function
                                                        Definition

                                                        Distinguishes the type of involvement of the performer in the procedure. For example, surgeon, anaesthetist, endoscopist.

                                                        ShortType of performance
                                                        Control0..1
                                                        BindingFor example codes, see ProcedurePerformerRoleCodes
                                                        (example to http://hl7.org/fhir/ValueSet/performer-role|4.0.1)

                                                        A code that identifies the role of a performer of the procedure.

                                                        TypeCodeableConcept
                                                        Is Modifierfalse
                                                        Summarytrue
                                                        Requirements

                                                        Allows disambiguation of the types of involvement of different performers.

                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        76. Procedure.performer.actor
                                                        Definition

                                                        The practitioner who was involved in the procedure.

                                                        ShortThe reference to the practitioner
                                                        Control1..1
                                                        TypeReference(Practitioner (CZ core), Practitioner Role (CZ core), Patient (EPS), Related Person (CZ core), Organization (CZ core))
                                                        Is Modifierfalse
                                                        Summarytrue
                                                        Requirements

                                                        A reference to Device supports use cases, such as pacemakers.

                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        78. Procedure.performer.onBehalfOf
                                                        Definition

                                                        The organization the device or practitioner was acting on behalf of.

                                                        ShortOrganization the device or practitioner was acting for
                                                        Control0..1
                                                        TypeReference(Organization (CZ core))
                                                        Is Modifierfalse
                                                        Summaryfalse
                                                        Requirements

                                                        Practitioners and Devices can be associated with multiple organizations. This element indicates which organization they were acting on behalf of when performing the action.

                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        80. Procedure.location
                                                        Definition

                                                        The location where the procedure actually happened. E.g. a newborn at home, a tracheostomy at a restaurant.

                                                        ShortWhere the procedure happened
                                                        Control0..1
                                                        TypeReference(Location)
                                                        Is Modifierfalse
                                                        Summarytrue
                                                        Requirements

                                                        Ties a procedure to where the records are likely kept.

                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        82. Procedure.reasonCode
                                                        Definition

                                                        The coded reason why the procedure was performed. This may be a coded entity of some type, or may simply be present as text.

                                                        ShortWhy the procedure was performed (code)
                                                        Comments

                                                        Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

                                                        Control0..*
                                                        BindingFor example codes, see ProcedureReasonCodes
                                                        (example to http://hl7.org/fhir/ValueSet/procedure-reason|4.0.1)

                                                        A code that identifies the reason a procedure is required.

                                                        TypeCodeableConcept
                                                        Is Modifierfalse
                                                        Obligations
                                                          ObligationsActor
                                                          SHALL:able-to-populateCreator_L3
                                                          SHALL:displayConsumer_L3
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          84. Procedure.reasonReference
                                                          Definition

                                                          The justification of why the procedure was performed.

                                                          ShortWhy the procedure was performed (details)
                                                          Comments

                                                          It is possible for a procedure to be a reason (such as C-Section) for another procedure (such as an epidural). Other examples include endoscopy for dilatation and biopsy (a combination of diagnostic and therapeutic use). Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

                                                          Control0..*
                                                          TypeReference(Condition (CZ core), Observation, Procedure (CZ PS), DiagnosticReport (CZ core), DocumentReference)
                                                          Is Modifierfalse
                                                          Obligations
                                                            ObligationsActor
                                                            SHALL:able-to-populateCreator_L3
                                                            SHALL:displayConsumer_L3
                                                            Summarytrue
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            86. Procedure.bodySite
                                                            Definition

                                                            Anatomical location which is the focus of the problem.

                                                            ShortTarget body sites
                                                            Comments

                                                            If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension procedure-targetbodystructure.

                                                            Control0..*
                                                            BindingThe codes SHOULD be taken from SNOMEDCTBodyStructures
                                                            (preferred to http://hl7.org/fhir/ValueSet/body-site)
                                                            TypeCodeableConcept
                                                            Is Modifierfalse
                                                            Summarytrue
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            eu-bodysite-1: Either a body site code or a reference to a BodyStructure resource SHALL be used, but not both. ((coding.empty() and text.empty()) or extension('http://hl7.org/fhir/StructureDefinition/bodySite').empty())
                                                            88. Procedure.bodySite.id
                                                            Definition

                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                            ShortUnique id for inter-element referencing
                                                            Control0..1
                                                            Typestring
                                                            Is Modifierfalse
                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                            Summaryfalse
                                                            90. Procedure.bodySite.extension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                            ShortAdditional content defined by implementations
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            TypeExtension
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Alternate Namesextensions, user content
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            SlicingThis element introduces a set of slices on Procedure.bodySite.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                                                            • value @ url
                                                            92. Procedure.bodySite.extension:bodySite
                                                            Slice NamebodySite
                                                            Definition

                                                            Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

                                                            ShortTarget anatomic location or structure
                                                            Control0..1
                                                            TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            94. Procedure.bodySite.extension:bodySite.id
                                                            Definition

                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                            ShortUnique id for inter-element referencing
                                                            Control0..1
                                                            This element is affected by the following invariants: ele-1
                                                            Typeid
                                                            Is Modifierfalse
                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                            Summaryfalse
                                                            96. Procedure.bodySite.extension:bodySite.extension
                                                            Definition

                                                            An Extension

                                                            ShortExtension
                                                            Control0..0
                                                            TypeExtension
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            SlicingThis element introduces a set of slices on Procedure.bodySite.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                                                            • value @ url
                                                            98. Procedure.bodySite.extension:bodySite.url
                                                            Definition

                                                            Source of the definition for the extension code - a logical name or a URL.

                                                            Shortidentifies the meaning of the extension
                                                            Comments

                                                            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                                                            Control1..1
                                                            Typeuri
                                                            Is Modifierfalse
                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                            Summaryfalse
                                                            Fixed Value
                                                            {
                                                              "url" : "http://hl7.org/fhir/StructureDefinition/bodySite"
                                                            }
                                                            <url value="http://hl7.org/fhir/StructureDefinition/bodySite"/>
                                                            100. Procedure.bodySite.extension:bodySite.value[x]
                                                            Definition

                                                            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                                                            ShortValue of extension
                                                            Control1..1
                                                            This element is affected by the following invariants: ext-1
                                                            TypeReference(BodyStructure (EU core))
                                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            102. Procedure.bodySite.coding
                                                            Definition

                                                            A reference to a code defined by a terminology system.

                                                            ShortCode defined by a terminology system
                                                            Comments

                                                            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                                            Control0..*
                                                            TypeCoding
                                                            Is Modifierfalse
                                                            Summarytrue
                                                            Requirements

                                                            Allows for alternative encodings within a code system, and translations to other code systems.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            104. Procedure.bodySite.text
                                                            Definition

                                                            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                                            ShortPlain text representation of the concept
                                                            Comments

                                                            Very often the text is the same as a displayName of one of the codings.

                                                            Control0..1
                                                            Typestring
                                                            Is Modifierfalse
                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                            Summarytrue
                                                            Requirements

                                                            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            106. Procedure.outcome
                                                            Definition

                                                            The outcome of the procedure - did it resolve the reasons for the procedure being performed?

                                                            ShortOutcome of the procedure
                                                            Comments

                                                            If outcome contains narrative text only, it can be captured using the CodeableConcept.text.

                                                            Control0..1
                                                            BindingFor example codes, see ProcedureOutcomeCodes(SNOMEDCT)
                                                            (example to http://hl7.org/fhir/ValueSet/procedure-outcome|4.0.1)

                                                            An outcome of a procedure - whether it was resolved or otherwise.

                                                            TypeCodeableConcept
                                                            Is Modifierfalse
                                                            Obligations
                                                              ObligationsActor
                                                              SHALL:populate-if-knownCreator_L3
                                                              SHALL:displayConsumer_L3
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              108. Procedure.report
                                                              Definition

                                                              This could be a histology result, pathology report, surgical report, etc.

                                                              ShortAny report resulting from the procedure
                                                              Comments

                                                              There could potentially be multiple reports - e.g. if this was a procedure which took multiple biopsies resulting in a number of anatomical pathology reports.

                                                              Control0..*
                                                              TypeReference(DiagnosticReport, DocumentReference, Composition)
                                                              Is Modifierfalse
                                                              Summaryfalse
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              110. Procedure.complication
                                                              Definition

                                                              Any complications that occurred during the procedure, or in the immediate post-performance period. These are generally tracked separately from the notes, which will typically describe the procedure itself rather than any 'post procedure' issues.

                                                              ShortComplications that occurred during the procedure (code)
                                                              Comments

                                                              If complications are only expressed by the narrative text, they can be captured using the CodeableConcept.text.

                                                              Control0..*
                                                              BindingFor example codes, see Condition/Problem/DiagnosisCodes
                                                              (example to http://hl7.org/fhir/ValueSet/condition-code|4.0.1)

                                                              Codes describing complications that resulted from a procedure.

                                                              TypeCodeableConcept
                                                              Is Modifierfalse
                                                              Obligations
                                                                ObligationsActor
                                                                SHALL:populate-if-knownCreator_L3
                                                                SHALL:displayConsumer_L3
                                                                Summaryfalse
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                112. Procedure.complicationDetail
                                                                Definition

                                                                Any complications that occurred during the procedure, or in the immediate post-performance period.

                                                                ShortComplications that occurred during the procedure (details)
                                                                Control0..*
                                                                TypeReference(Condition (EU core))
                                                                Is Modifierfalse
                                                                Obligations
                                                                  ObligationsActor
                                                                  SHALL:populate-if-knownCreator_L3
                                                                  SHALL:displayConsumer_L3
                                                                  Summaryfalse
                                                                  Requirements

                                                                  This is used to document a condition that is a result of the procedure, not the condition that was the reason for the procedure.

                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  114. Procedure.followUp
                                                                  Definition

                                                                  If the procedure required specific follow up - e.g. removal of sutures. The follow up may be represented as a simple note or could potentially be more complex, in which case the CarePlan resource can be used.

                                                                  ShortInstructions for follow up
                                                                  Control0..*
                                                                  BindingFor example codes, see ProcedureFollowUpCodes(SNOMEDCT)
                                                                  (example to http://hl7.org/fhir/ValueSet/procedure-followup|4.0.1)

                                                                  Specific follow up required for a procedure e.g. removal of sutures.

                                                                  TypeCodeableConcept
                                                                  Is Modifierfalse
                                                                  Summaryfalse
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  116. Procedure.note
                                                                  Definition

                                                                  Any other notes and comments about the procedure.

                                                                  ShortAdditional information about the procedure.
                                                                  Control0..*
                                                                  TypeAnnotation
                                                                  Is Modifierfalse
                                                                  Summaryfalse
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  118. Procedure.focalDevice
                                                                  Definition

                                                                  A device that is implanted, removed or otherwise manipulated (calibration, battery replacement, fitting a prosthesis, attaching a wound-vac, etc.) as a focal portion of the Procedure.

                                                                  ShortDevice implanted, removed or otherwise manipulated
                                                                  Control0..*
                                                                  TypeBackboneElement
                                                                  Is Modifierfalse
                                                                  Obligations
                                                                    ObligationsActor
                                                                    SHALL:populate-if-knownCreator_L3
                                                                    SHALL:displayConsumer_L3
                                                                    Summaryfalse
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    120. Procedure.focalDevice.id
                                                                    Definition

                                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                    ShortUnique id for inter-element referencing
                                                                    Control0..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                                    Summaryfalse
                                                                    122. Procedure.focalDevice.extension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                    ShortAdditional content defined by implementations
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifierfalse
                                                                    Summaryfalse
                                                                    Alternate Namesextensions, user content
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    124. Procedure.focalDevice.modifierExtension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                    Summarytrue
                                                                    Requirements

                                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                    Alternate Namesextensions, user content, modifiers
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    126. Procedure.focalDevice.action
                                                                    Definition

                                                                    The kind of change that happened to the device during the procedure.

                                                                    ShortKind of change to device
                                                                    Control0..1
                                                                    BindingThe codes SHOULD be taken from ProcedureDeviceActionCodes
                                                                    (preferred to http://hl7.org/fhir/ValueSet/device-action|4.0.1)

                                                                    A kind of change that happened to the device during the procedure.

                                                                    TypeCodeableConcept
                                                                    Is Modifierfalse
                                                                    Summaryfalse
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    128. Procedure.focalDevice.manipulated
                                                                    Definition

                                                                    The device that was manipulated (changed) during the procedure.

                                                                    ShortDevice that was changed
                                                                    Control1..1
                                                                    TypeReference(Device)
                                                                    Is Modifierfalse
                                                                    Summaryfalse
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    130. Procedure.usedReference
                                                                    Definition

                                                                    Identifies medications, devices and any other substance used as part of the procedure.

                                                                    ShortItems used during procedure
                                                                    Comments

                                                                    For devices actually implanted or removed, use Procedure.device.

                                                                    Control0..*
                                                                    TypeReference(Device, Medication (EU core), Substance)
                                                                    Is Modifierfalse
                                                                    Summaryfalse
                                                                    Requirements

                                                                    Used for tracking contamination, etc.

                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    132. Procedure.usedCode
                                                                    Definition

                                                                    Identifies coded items that were used as part of the procedure.

                                                                    ShortDevice used to perform the procedure (code)
                                                                    Comments

                                                                    For devices actually implanted or removed, use Procedure.device.

                                                                    Control0..*
                                                                    BindingFor example codes, see FHIRDeviceTypes
                                                                    (example to http://hl7.org/fhir/ValueSet/device-kind|4.0.1)

                                                                    Codes describing items used during a procedure.

                                                                    TypeCodeableConcept
                                                                    Is Modifierfalse
                                                                    Summaryfalse
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))