HL7 Europe Hospital Discharge Report
1.0.0-ci - draft 150

HL7 Europe Hospital Discharge Report, published by HL7 Europe. This guide is not an authorized publication; it is the continuous build for version 1.0.0-ci built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/hl7-eu/hdr/ and changes regularly. See the Directory of published versions

Resource Profile: ConditionEuCoreObligation - Detailed Descriptions

Page standards status: Informative Maturity Level: 0

Definitions for the condition-obl-eu-hdr resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Condition
Definition

A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

ShortDetailed information about conditions, problems or diagnoses
Control0..*
Is Modifierfalse
Summaryfalse
Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
con-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
2. Condition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Condition.extension:assertedDate
Slice NameassertedDate
Definition

When the asserter identified the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept that may have risen to a level of or remains a concern. For example, when the patient experiences chest pain, the asserted date represents when the clinician began following the chest pain - not when the patient experienced the chest pain. Asserted date supports the recognition that information is not always entered in a system immediately. Assertion and recording are different acts, so asserted date and recorded date are semantically different. However, they may be the same date and close in time. If this difference is significant for your use case, assertion date may be useful.

ShortDate the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept was first asserted
Comments

The assertedDate is in the context of the recording practitioner and might not be the same as the recordedDate.

Control0..1
TypeExtension(Condition Asserted Date) (Extension Type: dateTime)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Condition.extension:assertedDate.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Condition.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. Condition.extension:assertedDate.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuehttp://hl7.org/fhir/StructureDefinition/condition-assertedDate
    10. Condition.extension:assertedDate.value[x]
    Definition

    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortDate and time of the diagnosis assertionValue of extension
    Control10..1
    This element is affected by the following invariants: ext-1
    TypedateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Condition.extension:relatedArtifact
    Slice NamerelatedArtifact
    Definition

    Related artifacts such as additional documentation, justification, dependencies, bibliographic references, and predecessor and successor artifacts.

    ShortAdditional documentation, citations, etc.
    Comments

    Each related artifact is either an attachment, or a reference to another resource, but not both.

    Control0..*
    TypeExtension(Artifact related artifact) (Extension Type: RelatedArtifact)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Condition.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Condition.identifier
    Definition

    Globally unique identifier of this problem which remain constant as the resource is updated and propagates from server to server.


    Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

    ShortExternal Ids for this condition
    Comments

    This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier
    Is Modifierfalse
    Obligations
      ObligationsActor
      SHOULD:able-to-populateProducer
      Summarytrue
      Requirements

      Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Condition.clinicalStatus
      Definition

      The problem status describes the condition of the problem:

      1. Active problems are problems of which the patient experiences symptoms or for which evidence exists.

      2. If condition is abated, then clinicalStatus must be either inactive, resolved, or remission.

      3. Problems with the status 'Inactive' refer to problems that don't affect the patient anymore or that of which there is no evidence of existence anymore.


      The clinical status of the condition.

      Shortactive | recurrence | relapse | inactive | remission | resolved
      Comments

      The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

      Control0..1
      This element is affected by the following invariants: con-3, con-4, con-5
      BindingThe codes SHALL be taken from ConditionClinicalStatusCodeshttp://hl7.org/fhir/ValueSet/condition-clinical|4.0.1
      (required to http://hl7.org/fhir/ValueSet/condition-clinical)
      TypeCodeableConcept
      Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
      Obligations
        ObligationsActor
        SHALL:able-to-populateProducer
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. Condition.verificationStatus
        Definition

        The verification status to support the clinical status of the condition.

        Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
        Comments

        verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

        Control0..1
        This element is affected by the following invariants: con-3, con-5
        BindingThe codes SHALL be taken from ConditionVerificationStatushttp://hl7.org/fhir/ValueSet/condition-ver-status|4.0.1
        (required to http://hl7.org/fhir/ValueSet/condition-ver-status)
        TypeCodeableConcept
        Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Condition.code
        Definition

        The problem code specifies the problem. Depending on the setting, different code systems can be used. The ProblemCodelist provides an overview of the possible code systems.


        Identification of the condition, problem or diagnosis.

        ShortIdentification of the condition, problem or diagnosis
        Control10..1
        BindingThe codes SHOULD be taken from For example codes, see Problems - IPShttp://hl7.org/fhir/ValueSet/condition-code|4.0.1
        (preferred to http://hl7.org/fhir/uv/ips/ValueSet/problems-uv-ips)

        Valueset to describe the actual problem experienced by the patient


        Identification of the condition or diagnosis.

        TypeCodeableConcept
        Is Modifierfalse
        Obligations
          ObligationsActor
          SHALL:able-to-populateProducer
          Summarytrue
          Requirements

          0..1 to account for primarily narrative only resources.

          Alternate Namestype
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          24. Condition.bodySite
          Definition

          The anatomical location where this condition manifests itself.

          ShortAnatomical location, if relevant
          Comments

          Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

          Control0..*
          BindingThe codes SHOULD be taken from For example codes, see SNOMEDCTBodyStructureshttp://hl7.org/fhir/ValueSet/body-site|4.0.1
          (preferred to http://hl7.org/fhir/ValueSet/body-site)
          TypeCodeableConcept
          Is Modifierfalse
          Obligations
            ObligationsActor
            SHOULD:able-to-populateProducer
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            eu-bodysite-1: Either a body site code or a reference to a BodyStructure resource SHALL be used, but not both. ((coding.empty() and text.empty()) or extension('http://hl7.org/fhir/StructureDefinition/bodySite').empty())
            26. Condition.bodySite.extension:bodySite
            Slice NamebodySite
            Definition

            Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

            ShortTarget anatomic location or structure
            Control0..1
            TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            28. Condition.bodySite.extension:bodySite.extension
            Definition

            An Extension


            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortExtensionAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..0*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Condition.bodySite.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 30. Condition.bodySite.extension:bodySite.url
              Definition

              Source of the definition for the extension code - a logical name or a URL.

              Shortidentifies the meaning of the extension
              Comments

              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

              Control1..1
              Typeuri
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              Fixed Valuehttp://hl7.org/fhir/StructureDefinition/bodySite
              32. Condition.bodySite.extension:bodySite.value[x]
              Definition

              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

              ShortValue of extension
              Control10..1
              This element is affected by the following invariants: ext-1
              TypeReference(BodyStructure (EU core)), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. Condition.subject
              Definition

              Indicates the patient or group who the condition record is associated with.

              ShortWho has the condition?
              Control1..1
              TypeReference(Patient (EU core), Patient, Group)
              Is Modifierfalse
              Obligations
                ObligationsActor
                SHALL:able-to-populateProducer
                Summarytrue
                Requirements

                Group is typically used for veterinary or public health use cases.

                Alternate Namespatient
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                36. Condition.onset[x]
                Definition

                Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                ShortEstimated or actual date, date-time, or age
                Comments

                Age is generally used when the patient reports an age at which the Condition began to occur.

                Control0..1
                TypedateTime, string, Period, Range, Age
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Condition.onset[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                • type @ $this
                • 38. Condition.onset[x]:onsetDateTime
                  Slice NameonsetDateTime
                  Definition

                  Onset of the symptom, complaint, functional limitation, complication or date of diagnosis. A ‘vague’ date, such as only the year or the month and the year, is permitted.


                  Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                  ShortEstimated or actual date, date-time, or age
                  Comments

                  Age is generally used when the patient reports an age at which the Condition began to occur.

                  Control0..1
                  TypedateTime, string, Period, Range, Age
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Obligations
                    ObligationsActor
                    SHOULD:able-to-populateProducer
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    40. Condition.abatement[x]
                    Definition

                    The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                    ShortWhen in resolution/remission
                    Comments

                    There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                    Control0..1
                    This element is affected by the following invariants: con-4
                    TypedateTime, string, Period, Range, Age
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on Condition.abatement[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                    • type @ $this
                    • 42. Condition.abatement[x]:abatementDateTime
                      Slice NameabatementDateTime
                      Definition

                      The date or estimated date that the condition resolved or went into remission. A ‘vague’ date, such as only the year or the month and the year, is permitted


                      The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                      ShortWhen in resolution/remission
                      Comments

                      There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                      Control0..1
                      This element is affected by the following invariants: con-4
                      TypedateTime, string, Period, Range, Age
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Obligations
                        ObligationsActor
                        SHALL:able-to-populateProducer
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                        Guidance on how to interpret the contents of this table can be foundhere

                        0. Condition
                        2. Condition.identifier
                        NoteThis is a business identifier, not a resource identifier (see discussion)
                        Obligations
                          ObligationsActor
                          SHOULD:able-to-populateProducer
                          4. Condition.clinicalStatus
                          Obligations
                            ObligationsActor
                            SHALL:able-to-populateProducer
                            6. Condition.code
                            Obligations
                              ObligationsActor
                              SHALL:able-to-populateProducer
                              8. Condition.bodySite
                              Obligations
                                ObligationsActor
                                SHOULD:able-to-populateProducer
                                10. Condition.subject
                                Obligations
                                  ObligationsActor
                                  SHALL:able-to-populateProducer
                                  12. Condition.onset[x]:onsetDateTime
                                  Slice NameonsetDateTime
                                  TypedateTime
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Obligations
                                    ObligationsActor
                                    SHOULD:able-to-populateProducer
                                    14. Condition.abatement[x]:abatementDateTime
                                    Slice NameabatementDateTime
                                    TypedateTime
                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Obligations
                                      ObligationsActor
                                      SHALL:able-to-populateProducer

                                      Guidance on how to interpret the contents of this table can be foundhere

                                      0. Condition
                                      Definition

                                      A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

                                      ShortDetailed information about conditions, problems or diagnoses
                                      Control0..*
                                      Is Modifierfalse
                                      Summaryfalse
                                      Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
                                      con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
                                      con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
                                      dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                                      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                                      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                                      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                                      dom-6: A resource should have narrative for robust management (text.`div`.exists())
                                      2. Condition.id
                                      Definition

                                      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                                      ShortLogical id of this artifact
                                      Comments

                                      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                                      Control0..1
                                      Typeid
                                      Is Modifierfalse
                                      Summarytrue
                                      4. Condition.meta
                                      Definition

                                      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                                      ShortMetadata about the resource
                                      Control0..1
                                      TypeMeta
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      6. Condition.implicitRules
                                      Definition

                                      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                                      ShortA set of rules under which this content was created
                                      Comments

                                      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                                      Control0..1
                                      Typeuri
                                      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      8. Condition.language
                                      Definition

                                      The base language in which the resource is written.

                                      ShortLanguage of the condition content
                                      Comments

                                      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                                      Control0..1
                                      BindingThe codes SHOULD be taken from CommonLanguages
                                      (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

                                      A human language.

                                      Additional BindingsPurpose
                                      AllLanguagesMax Binding
                                      Typecode
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      10. Condition.text
                                      Definition

                                      Human readable specification of the problem. This is a general notes/comments entry for description of the problem, its diagnosis and prognosis.

                                      ShortText summary of the resource, for human interpretation
                                      Comments

                                      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                                      Control0..1
                                      TypeNarrative
                                      Is Modifierfalse
                                      Summaryfalse
                                      Alternate Namesnarrative, html, xhtml, display
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      12. Condition.contained
                                      Definition

                                      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                                      ShortContained, inline Resources
                                      Comments

                                      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                                      Control0..*
                                      TypeResource
                                      Is Modifierfalse
                                      Summaryfalse
                                      Alternate Namesinline resources, anonymous resources, contained resources
                                      14. Condition.extension
                                      Definition

                                      An Extension

                                      ShortExtension
                                      Control0..*
                                      TypeExtension
                                      Is Modifierfalse
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      SlicingThis element introduces a set of slices on Condition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                      • value @ url
                                      • 16. Condition.extension:assertedDate
                                        Slice NameassertedDate
                                        Definition

                                        When the asserter identified the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept that may have risen to a level of or remains a concern. For example, when the patient experiences chest pain, the asserted date represents when the clinician began following the chest pain - not when the patient experienced the chest pain. Asserted date supports the recognition that information is not always entered in a system immediately. Assertion and recording are different acts, so asserted date and recorded date are semantically different. However, they may be the same date and close in time. If this difference is significant for your use case, assertion date may be useful.

                                        ShortDate the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept was first asserted
                                        Comments

                                        The assertedDate is in the context of the recording practitioner and might not be the same as the recordedDate.

                                        Control0..1
                                        TypeExtension(Condition Asserted Date) (Extension Type: dateTime)
                                        Is Modifierfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        18. Condition.extension:assertedDate.id
                                        Definition

                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                        ShortUnique id for inter-element referencing
                                        Control0..1
                                        This element is affected by the following invariants: ele-1
                                        Typeid
                                        Is Modifierfalse
                                        XML FormatIn the XML format, this property is represented as an attribute.
                                        Summaryfalse
                                        20. Condition.extension:assertedDate.extension
                                        Definition

                                        An Extension

                                        ShortExtension
                                        Control0..0
                                        TypeExtension
                                        Is Modifierfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        SlicingThis element introduces a set of slices on Condition.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                        • value @ url
                                        • 22. Condition.extension:assertedDate.url
                                          Definition

                                          Source of the definition for the extension code - a logical name or a URL.

                                          Shortidentifies the meaning of the extension
                                          Comments

                                          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                                          Control1..1
                                          Typeuri
                                          Is Modifierfalse
                                          XML FormatIn the XML format, this property is represented as an attribute.
                                          Summaryfalse
                                          Fixed Valuehttp://hl7.org/fhir/StructureDefinition/condition-assertedDate
                                          24. Condition.extension:assertedDate.value[x]
                                          Definition

                                          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                                          ShortDate and time of the diagnosis assertion
                                          Control1..1
                                          This element is affected by the following invariants: ext-1
                                          TypedateTime
                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          26. Condition.extension:relatedArtifact
                                          Slice NamerelatedArtifact
                                          Definition

                                          Related artifacts such as additional documentation, justification, dependencies, bibliographic references, and predecessor and successor artifacts.

                                          ShortAdditional documentation, citations, etc.
                                          Comments

                                          Each related artifact is either an attachment, or a reference to another resource, but not both.

                                          Control0..*
                                          TypeExtension(Artifact related artifact) (Extension Type: RelatedArtifact)
                                          Is Modifierfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          28. Condition.modifierExtension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                          ShortExtensions that cannot be ignored
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                                          Summaryfalse
                                          Requirements

                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                          Alternate Namesextensions, user content
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          30. Condition.identifier
                                          Definition

                                          Globally unique identifier of this problem which remain constant as the resource is updated and propagates from server to server.

                                          ShortExternal Ids for this condition
                                          Comments

                                          This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

                                          NoteThis is a business identifier, not a resource identifier (see discussion)
                                          Control0..*
                                          TypeIdentifier
                                          Is Modifierfalse
                                          Obligations
                                            ObligationsActor
                                            SHOULD:able-to-populateProducer
                                            Summarytrue
                                            Requirements

                                            Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            32. Condition.clinicalStatus
                                            Definition

                                            The problem status describes the condition of the problem:

                                            1. Active problems are problems of which the patient experiences symptoms or for which evidence exists.

                                            2. If condition is abated, then clinicalStatus must be either inactive, resolved, or remission.

                                            3. Problems with the status 'Inactive' refer to problems that don't affect the patient anymore or that of which there is no evidence of existence anymore.

                                            Shortactive | recurrence | relapse | inactive | remission | resolved
                                            Comments

                                            The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

                                            Control0..1
                                            This element is affected by the following invariants: con-3, con-4, con-5
                                            BindingThe codes SHALL be taken from ConditionClinicalStatusCodes
                                            (required to http://hl7.org/fhir/ValueSet/condition-clinical)
                                            TypeCodeableConcept
                                            Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
                                            Obligations
                                              ObligationsActor
                                              SHALL:able-to-populateProducer
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              34. Condition.verificationStatus
                                              Definition

                                              The verification status to support the clinical status of the condition.

                                              Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
                                              Comments

                                              verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

                                              Control0..1
                                              This element is affected by the following invariants: con-3, con-5
                                              BindingThe codes SHALL be taken from ConditionVerificationStatus
                                              (required to http://hl7.org/fhir/ValueSet/condition-ver-status)
                                              TypeCodeableConcept
                                              Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              36. Condition.category
                                              Definition

                                              A category assigned to the condition.

                                              ShortCategory
                                              Comments

                                              The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

                                              Control0..*
                                              BindingUnless not suitable, these codes SHALL be taken from ConditionCategoryCodes
                                              (extensible to http://hl7.org/fhir/ValueSet/condition-category|4.0.1)

                                              A category assigned to the condition.

                                              TypeCodeableConcept
                                              Is Modifierfalse
                                              Summaryfalse
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              38. Condition.severity
                                              Definition

                                              A subjective assessment of the severity of the condition as evaluated by the clinician.

                                              ShortSubjective severity of condition
                                              Comments

                                              Coding of the severity with a terminology is preferred, where possible.

                                              Control0..1
                                              BindingThe codes SHOULD be taken from Condition/DiagnosisSeverity
                                              (preferred to http://hl7.org/fhir/ValueSet/condition-severity)
                                              TypeCodeableConcept
                                              Is Modifierfalse
                                              Summaryfalse
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              40. Condition.code
                                              Definition

                                              The problem code specifies the problem. Depending on the setting, different code systems can be used. The ProblemCodelist provides an overview of the possible code systems.

                                              ShortIdentification of the condition, problem or diagnosis
                                              Control1..1
                                              BindingThe codes SHOULD be taken from Problems - IPS
                                              (preferred to http://hl7.org/fhir/uv/ips/ValueSet/problems-uv-ips)

                                              Valueset to describe the actual problem experienced by the patient

                                              TypeCodeableConcept
                                              Is Modifierfalse
                                              Obligations
                                                ObligationsActor
                                                SHALL:able-to-populateProducer
                                                Summarytrue
                                                Requirements

                                                0..1 to account for primarily narrative only resources.

                                                Alternate Namestype
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                42. Condition.bodySite
                                                Definition

                                                The anatomical location where this condition manifests itself.

                                                ShortAnatomical location, if relevant
                                                Comments

                                                Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

                                                Control0..*
                                                BindingThe codes SHOULD be taken from SNOMEDCTBodyStructures
                                                (preferred to http://hl7.org/fhir/ValueSet/body-site)
                                                TypeCodeableConcept
                                                Is Modifierfalse
                                                Obligations
                                                  ObligationsActor
                                                  SHOULD:able-to-populateProducer
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  eu-bodysite-1: Either a body site code or a reference to a BodyStructure resource SHALL be used, but not both. ((coding.empty() and text.empty()) or extension('http://hl7.org/fhir/StructureDefinition/bodySite').empty())
                                                  44. Condition.bodySite.id
                                                  Definition

                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                  ShortUnique id for inter-element referencing
                                                  Control0..1
                                                  Typestring
                                                  Is Modifierfalse
                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                  Summaryfalse
                                                  46. Condition.bodySite.extension
                                                  Definition

                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                  ShortAdditional content defined by implementations
                                                  Comments

                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                  Control0..*
                                                  TypeExtension
                                                  Is Modifierfalse
                                                  Summaryfalse
                                                  Alternate Namesextensions, user content
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                  SlicingThis element introduces a set of slices on Condition.bodySite.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                  • value @ url
                                                  • 48. Condition.bodySite.extension:bodySite
                                                    Slice NamebodySite
                                                    Definition

                                                    Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

                                                    ShortTarget anatomic location or structure
                                                    Control0..1
                                                    TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
                                                    Is Modifierfalse
                                                    Summaryfalse
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                    50. Condition.bodySite.extension:bodySite.id
                                                    Definition

                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                    ShortUnique id for inter-element referencing
                                                    Control0..1
                                                    This element is affected by the following invariants: ele-1
                                                    Typeid
                                                    Is Modifierfalse
                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                    Summaryfalse
                                                    52. Condition.bodySite.extension:bodySite.extension
                                                    Definition

                                                    An Extension

                                                    ShortExtension
                                                    Control0..0
                                                    TypeExtension
                                                    Is Modifierfalse
                                                    Summaryfalse
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                    SlicingThis element introduces a set of slices on Condition.bodySite.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                    • value @ url
                                                    • 54. Condition.bodySite.extension:bodySite.url
                                                      Definition

                                                      Source of the definition for the extension code - a logical name or a URL.

                                                      Shortidentifies the meaning of the extension
                                                      Comments

                                                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                                                      Control1..1
                                                      Typeuri
                                                      Is Modifierfalse
                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                      Summaryfalse
                                                      Fixed Valuehttp://hl7.org/fhir/StructureDefinition/bodySite
                                                      56. Condition.bodySite.extension:bodySite.value[x]
                                                      Definition

                                                      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                                                      ShortValue of extension
                                                      Control1..1
                                                      This element is affected by the following invariants: ext-1
                                                      TypeReference(BodyStructure (EU core))
                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                      Is Modifierfalse
                                                      Summaryfalse
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      58. Condition.bodySite.coding
                                                      Definition

                                                      A reference to a code defined by a terminology system.

                                                      ShortCode defined by a terminology system
                                                      Comments

                                                      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                                      Control0..*
                                                      TypeCoding
                                                      Is Modifierfalse
                                                      Summarytrue
                                                      Requirements

                                                      Allows for alternative encodings within a code system, and translations to other code systems.

                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      60. Condition.bodySite.text
                                                      Definition

                                                      A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                                      ShortPlain text representation of the concept
                                                      Comments

                                                      Very often the text is the same as a displayName of one of the codings.

                                                      Control0..1
                                                      Typestring
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Summarytrue
                                                      Requirements

                                                      The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      62. Condition.subject
                                                      Definition

                                                      Indicates the patient or group who the condition record is associated with.

                                                      ShortWho has the condition?
                                                      Control1..1
                                                      TypeReference(Patient (EU core))
                                                      Is Modifierfalse
                                                      Obligations
                                                        ObligationsActor
                                                        SHALL:able-to-populateProducer
                                                        Summarytrue
                                                        Requirements

                                                        Group is typically used for veterinary or public health use cases.

                                                        Alternate Namespatient
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        64. Condition.encounter
                                                        Definition

                                                        The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

                                                        ShortEncounter created as part of
                                                        Comments

                                                        This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

                                                        Control0..1
                                                        TypeReference(Encounter)
                                                        Is Modifierfalse
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        66. Condition.onset[x]
                                                        Definition

                                                        Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                                                        ShortEstimated or actual date, date-time, or age
                                                        Comments

                                                        Age is generally used when the patient reports an age at which the Condition began to occur.

                                                        Control0..1
                                                        TypedateTime
                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        SlicingThis element introduces a set of slices on Condition.onset[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                                                        • type @ $this
                                                        • 68. Condition.onset[x]:onsetDateTime
                                                          Slice NameonsetDateTime
                                                          Definition

                                                          Onset of the symptom, complaint, functional limitation, complication or date of diagnosis. A ‘vague’ date, such as only the year or the month and the year, is permitted.

                                                          ShortEstimated or actual date, date-time, or age
                                                          Comments

                                                          Age is generally used when the patient reports an age at which the Condition began to occur.

                                                          Control0..1
                                                          TypedateTime
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifierfalse
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Obligations
                                                            ObligationsActor
                                                            SHOULD:able-to-populateProducer
                                                            Summarytrue
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            70. Condition.abatement[x]
                                                            Definition

                                                            The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                                                            ShortWhen in resolution/remission
                                                            Comments

                                                            There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                                                            Control0..1
                                                            This element is affected by the following invariants: con-4
                                                            TypedateTime
                                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                            Is Modifierfalse
                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                            Summaryfalse
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            SlicingThis element introduces a set of slices on Condition.abatement[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                                                            • type @ $this
                                                            • 72. Condition.abatement[x]:abatementDateTime
                                                              Slice NameabatementDateTime
                                                              Definition

                                                              The date or estimated date that the condition resolved or went into remission. A ‘vague’ date, such as only the year or the month and the year, is permitted

                                                              ShortWhen in resolution/remission
                                                              Comments

                                                              There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                                                              Control0..1
                                                              This element is affected by the following invariants: con-4
                                                              TypedateTime
                                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Obligations
                                                                ObligationsActor
                                                                SHALL:able-to-populateProducer
                                                                Summaryfalse
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                74. Condition.recordedDate
                                                                Definition

                                                                The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

                                                                ShortDate when the condition record was created
                                                                Control0..1
                                                                TypedateTime
                                                                Is Modifierfalse
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                76. Condition.recorder
                                                                Definition

                                                                Individual who recorded the record and takes responsibility for its content.

                                                                ShortWho recorded the condition
                                                                Control0..1
                                                                TypeReference(PractitionerRole (EU base), Practitioner (EU base), Patient (EU core), RelatedPerson)
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                78. Condition.asserter
                                                                Definition

                                                                Individual who is making the condition statement.

                                                                ShortWho asserted the condition
                                                                Control0..1
                                                                TypeReference(Practitioner, PractitionerRole, Patient, RelatedPerson)
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                80. Condition.stage
                                                                Definition

                                                                Clinical stage or grade of a condition. May include formal severity assessments.

                                                                ShortStage/grade
                                                                Control0..*
                                                                TypeBackboneElement
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Invariantscon-1: Stage SHALL have summary or assessment (summary.exists() or assessment.exists())
                                                                ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                82. Condition.stage.id
                                                                Definition

                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                ShortUnique id for inter-element referencing
                                                                Control0..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                Summaryfalse
                                                                84. Condition.stage.extension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                ShortAdditional content defined by implementations
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Alternate Namesextensions, user content
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                86. Condition.stage.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                88. Condition.stage.summary
                                                                Definition

                                                                A simple summary of the stage such as "Stage 3". The determination of the stage is disease-specific.

                                                                ShortMost recent Stage Group
                                                                Control0..1
                                                                This element is affected by the following invariants: con-1
                                                                BindingFor example codes, see ConditionStage
                                                                (example to http://hl7.org/fhir/ValueSet/condition-stage|4.0.1)

                                                                Codes describing condition stages (e.g. Cancer stages).

                                                                TypeCodeableConcept
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                90. Condition.stage.assessment
                                                                Definition

                                                                Reference to the evidence on which the staging assessment is based.

                                                                ShortFormal record of assessment
                                                                Control0..*
                                                                This element is affected by the following invariants: con-1
                                                                TypeReference(ClinicalImpression, DiagnosticReport, Observation)
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                92. Condition.stage.type
                                                                Definition

                                                                The kind of staging, such as pathological or clinical staging.

                                                                ShortStaging system used.
                                                                Control0..1
                                                                BindingFor example codes, see ConditionStageType
                                                                (example to http://hl7.org/fhir/ValueSet/condition-stage-type|4.0.1)

                                                                Codes describing the kind of condition staging (e.g. clinical or pathological).

                                                                TypeCodeableConcept
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                94. Condition.evidence
                                                                Definition

                                                                Supporting evidence / manifestations that are the basis of the Condition's verification status, such as evidence that confirmed or refuted the condition.

                                                                ShortSupporting evidence
                                                                Comments

                                                                The evidence may be a simple list of coded symptoms/manifestations, or references to observations or formal assessments, or both.

                                                                Control0..*
                                                                TypeBackboneElement
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Invariantscon-2: evidence SHALL have code or details (code.exists() or detail.exists())
                                                                ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                96. Condition.evidence.id
                                                                Definition

                                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                ShortUnique id for inter-element referencing
                                                                Control0..1
                                                                Typestring
                                                                Is Modifierfalse
                                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                                Summaryfalse
                                                                98. Condition.evidence.extension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                ShortAdditional content defined by implementations
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Alternate Namesextensions, user content
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                100. Condition.evidence.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                102. Condition.evidence.code
                                                                Definition

                                                                A manifestation or symptom that led to the recording of this condition.

                                                                ShortManifestation/symptom
                                                                Control0..*
                                                                This element is affected by the following invariants: con-2
                                                                BindingFor example codes, see ManifestationAndSymptomCodes
                                                                (example to http://hl7.org/fhir/ValueSet/manifestation-or-symptom|4.0.1)

                                                                Codes that describe the manifestation or symptoms of a condition.

                                                                TypeCodeableConcept
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                104. Condition.evidence.detail
                                                                Definition

                                                                Links to other relevant information, including pathology reports.

                                                                ShortSupporting information found elsewhere
                                                                Control0..*
                                                                This element is affected by the following invariants: con-2
                                                                TypeReference(Resource)
                                                                Is Modifierfalse
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                106. Condition.note
                                                                Definition

                                                                Comment by the one who determined or updated the Problem.

                                                                ShortAdditional information about the Condition
                                                                Control0..*
                                                                TypeAnnotation
                                                                Is Modifierfalse
                                                                Summaryfalse
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))