HL7 Europe Hospital Discharge Report
0.0.1-ci - ci-build 150

HL7 Europe Hospital Discharge Report, published by HL7 Europe. This guide is not an authorized publication; it is the continuous build for version 0.0.1-ci built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/hl7-eu/hdr/ and changes regularly. See the Directory of published versions

Resource Profile: ConditionEuHdr - Detailed Descriptions

Draft as of 2024-12-20

Definitions for the condition-eu-hdr resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Condition
Impose ProfileThis profile also requires that the instance also conform this additional profile:
2. Condition.text
Definition

Human readable specification of the problem. This is a general notes/comments entry for description of the problem, its diagnosis and prognosis.

4. Condition.extension
SlicingThis element introduces a set of slices on Condition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Condition.extension:bodySite
    Slice NamebodySite
    Control0..1
    TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
    8. Condition.extension:bodySite.value[x]
    TypeReference(Body structure: Laboratory)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    10. Condition.identifier
    Definition

    Globally unique identifier of this problem which remain constant as the resource is updated and propagates from server to server.

    NoteThis is a business identifier, not a resource identifier (see discussion)
    12. Condition.clinicalStatus
    Definition

    The problem status describes the condition of the problem:

    1. Active problems are problems of which the patient experiences symptoms or for which evidence exists.

    2. If condition is abated, then clinicalStatus must be either inactive, resolved, or remission.

    3. Problems with the status 'Inactive' refer to problems that don't affect the patient anymore or that of which there is no evidence of existence anymore.

    BindingThe codes SHALL be taken from ConditionClinicalStatusCodes
    (required to http://hl7.org/fhir/ValueSet/condition-clinical)
    TypeCodeableConcept(Codeable Concept (IPS))
    14. Condition.verificationStatus
    BindingThe codes SHALL be taken from ConditionVerificationStatus
    (required to http://hl7.org/fhir/ValueSet/condition-ver-status)
    TypeCodeableConcept(Codeable Concept (IPS))
    16. Condition.category
    Definition

    Slices per type of classificaton

    Shortcategory codes
    TypeCodeableConcept(Codeable Concept (IPS))
    SlicingThis element introduces a set of slices on Condition.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ $this
    • 18. Condition.category:poa
      Slice Namepoa
      Definition

      Present on admission, Hospital acquired condition, Not applicable or unknown

      ShortPOA, HAC, NA
      Control0..1
      BindingThe codes SHALL be taken from Condition Present on Admission (POA) Value Set
      (required to http://hl7.eu/fhir/hdr/ValueSet/poa-indicator-eu-hdr)
      20. Condition.category:treated
      Slice Nametreated
      Definition

      Class of the problem (treated, other) in relation to the hospital encounter. Treated problems were treated or affected provisioning of care (diagnostics, therapy, nursing, monitoring) during the hospital encounter. At least one problem should be marked as Treated. Other problems are recorded only if they are important for continuity of care (after discharge).

      ShortTreated or untreated
      Control0..1
      BindingThe codes SHALL be taken from Treatment Class Value Set
      (required to http://hl7.eu/fhir/hdr/ValueSet/treated-problem-eu-hdr)
      22. Condition.severity
      BindingThe codes SHOULD be taken from Condition/DiagnosisSeverity
      (preferred to http://hl7.org/fhir/ValueSet/condition-severity)
      TypeCodeableConcept(Codeable Concept (IPS))
      24. Condition.code
      Definition

      The problem code specifies the problem. Depending on the setting, different code systems can be used. The ProblemCodelist provides an overview of the possible code systems.

      Control1..?
      BindingThe codes SHOULD be taken from Condition Value Set
      (preferred to http://hl7.eu/fhir/hdr/ValueSet/condition-eu-hdr)

      Valueset to describe the actual problem experienced by the patient

      TypeCodeableConcept(Codeable Concept (IPS))
      26. Condition.bodySite
      BindingThe codes SHOULD be taken from SNOMEDCTBodyStructures
      (preferred to http://hl7.org/fhir/ValueSet/body-site)
      TypeCodeableConcept(Codeable Concept (IPS))
      28. Condition.subject
      TypeReference(Patient (EU core))
      30. Condition.subject.reference
      Control1..?
      32. Condition.onset[x]
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      SlicingThis element introduces a set of slices on Condition.onset[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • type @ $this
      • 34. Condition.onset[x]:onsetDateTime
        Slice NameonsetDateTime
        Definition

        Onset of the symptom, complaint, functional limitation, complication or date of diagnosis. A ‘vague’ date, such as only the year or the month and the year, is permitted.

        Control0..1
        TypedateTime
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        36. Condition.abatement[x]
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        SlicingThis element introduces a set of slices on Condition.abatement[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • type @ $this
        • 38. Condition.abatement[x]:abatementDateTime
          Slice NameabatementDateTime
          Definition

          The date or estimated date that the condition resolved or went into remission. A ‘vague’ date, such as only the year or the month and the year, is permitted

          Control0..1
          TypedateTime
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          40. Condition.stage
          ShortStage/grade
          42. Condition.stage.summary
          ShortMost recent Stage Group
          44. Condition.stage.assessment
          Definition

          Reference to the evidence on which the staging assessment is based.

          46. Condition.stage.type
          ShortStaging system used.
          48. Condition.note
          Definition

          Comment by the one who determined or updated the Problem.

          Guidance on how to interpret the contents of this table can be found here

          0. Condition
          Definition

          A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

          ShortDetailed information about conditions, problems or diagnoses
          Control0..*
          Is Modifierfalse
          Impose ProfileThis profile also requires that the instance also conform this additional profile:
          Summaryfalse
          Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
          con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
          con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
          dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          con-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
          con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
          con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
          2. Condition.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          4. Condition.text
          Definition

          Human readable specification of the problem. This is a general notes/comments entry for description of the problem, its diagnosis and prognosis.


          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          TypeNarrative
          Is Modifierfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. Condition.extension
          Definition

          An Extension


          May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortExtensionAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Condition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 8. Condition.extension:bodySite
            Slice NamebodySite
            Definition

            Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

            ShortTarget anatomic location or structure
            Control0..1
            TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            10. Condition.extension:bodySite.extension
            Definition

            An Extension


            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortExtensionAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..0*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Condition.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 12. Condition.extension:bodySite.url
              Definition

              Source of the definition for the extension code - a logical name or a URL.

              Shortidentifies the meaning of the extension
              Comments

              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

              Control1..1
              Typeuri
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              Fixed Valuehttp://hl7.org/fhir/StructureDefinition/bodySite
              14. Condition.extension:bodySite.value[x]
              Definition

              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

              ShortValue of extension
              Control10..1
              This element is affected by the following invariants: ext-1
              TypeReference(Body structure: Laboratory), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              16. Condition.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
              Summaryfalse
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              18. Condition.identifier
              Definition

              Globally unique identifier of this problem which remain constant as the resource is updated and propagates from server to server.


              Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

              ShortExternal Ids for this condition
              Comments

              This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              20. Condition.clinicalStatus
              Definition

              The problem status describes the condition of the problem:

              1. Active problems are problems of which the patient experiences symptoms or for which evidence exists.

              2. If condition is abated, then clinicalStatus must be either inactive, resolved, or remission.

              3. Problems with the status 'Inactive' refer to problems that don't affect the patient anymore or that of which there is no evidence of existence anymore.


              The clinical status of the condition.

              ShortConcept - reference to a terminology or just textactive | recurrence | relapse | inactive | remission | resolved
              Comments

              Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.


              The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

              Control0..1
              This element is affected by the following invariants: ele-1, con-3, con-4, con-5
              BindingThe codes SHALL be taken from ConditionClinicalStatusCodeshttp://hl7.org/fhir/ValueSet/condition-clinical|4.0.1
              (required to http://hl7.org/fhir/ValueSet/condition-clinical)
              TypeCodeableConcept(Codeable Concept (IPS))
              Is Modifierfalsetrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              22. Condition.verificationStatus
              Definition

              A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.


              The verification status to support the clinical status of the condition.

              ShortConcept - reference to a terminology or just textunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
              Comments

              Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.


              verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

              Control0..1
              This element is affected by the following invariants: ele-1, con-3, con-5
              BindingThe codes SHALL be taken from ConditionVerificationStatushttp://hl7.org/fhir/ValueSet/condition-ver-status|4.0.1
              (required to http://hl7.org/fhir/ValueSet/condition-ver-status)
              TypeCodeableConcept(Codeable Concept (IPS))
              Is Modifierfalsetrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              24. Condition.category
              Definition

              Slices per type of classificaton


              A category assigned to the condition.

              Shortcategory codesproblem-list-item | encounter-diagnosis
              Comments

              The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

              Control0..*
              BindingUnless not suitable, these codes SHALL be taken from ConditionCategoryCodeshttp://hl7.org/fhir/ValueSet/condition-category
              (extensible to http://hl7.org/fhir/ValueSet/condition-category)

              A category assigned to the condition.

              TypeCodeableConcept(Codeable Concept (IPS))
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Condition.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ $this
              • 26. Condition.category:poa
                Slice Namepoa
                Definition

                Present on admission, Hospital acquired condition, Not applicable or unknown


                A category assigned to the condition.

                ShortPOA, HAC, NAproblem-list-item | encounter-diagnosis
                Comments

                The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

                Control0..1*
                BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Condition Present on Admission (POA) Value Sethttp://hl7.org/fhir/ValueSet/condition-category
                (required to http://hl7.eu/fhir/hdr/ValueSet/poa-indicator-eu-hdr)
                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. Condition.category:treated
                Slice Nametreated
                Definition

                Class of the problem (treated, other) in relation to the hospital encounter. Treated problems were treated or affected provisioning of care (diagnostics, therapy, nursing, monitoring) during the hospital encounter. At least one problem should be marked as Treated. Other problems are recorded only if they are important for continuity of care (after discharge).


                A category assigned to the condition.

                ShortTreated or untreatedproblem-list-item | encounter-diagnosis
                Comments

                The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

                Control0..1*
                BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Treatment Class Value Sethttp://hl7.org/fhir/ValueSet/condition-category
                (required to http://hl7.eu/fhir/hdr/ValueSet/treated-problem-eu-hdr)
                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                30. Condition.severity
                Definition

                A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.


                A subjective assessment of the severity of the condition as evaluated by the clinician.

                ShortConcept - reference to a terminology or just textSubjective severity of condition
                Comments

                Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.


                Coding of the severity with a terminology is preferred, where possible.

                Control0..1
                This element is affected by the following invariants: ele-1
                BindingThe codes SHOULD be taken from Condition/DiagnosisSeverityhttp://hl7.org/fhir/ValueSet/condition-severity
                (preferred to http://hl7.org/fhir/ValueSet/condition-severity)
                TypeCodeableConcept(Codeable Concept (IPS))
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                32. Condition.code
                Definition

                The problem code specifies the problem. Depending on the setting, different code systems can be used. The ProblemCodelist provides an overview of the possible code systems.


                Identification of the condition, problem or diagnosis.

                ShortConcept - reference to a terminology or just textIdentification of the condition, problem or diagnosis
                Comments

                Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

                Control10..1
                This element is affected by the following invariants: ele-1
                BindingThe codes SHOULD be taken from For example codes, see Condition Value Sethttp://hl7.org/fhir/ValueSet/condition-code
                (preferred to http://hl7.eu/fhir/hdr/ValueSet/condition-eu-hdr)

                Valueset to describe the actual problem experienced by the patient


                Identification of the condition or diagnosis.

                TypeCodeableConcept(Codeable Concept (IPS))
                Is Modifierfalse
                Requirements

                0..1 to account for primarily narrative only resources.

                Alternate Namestype
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                34. Condition.bodySite
                Definition

                A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.


                The anatomical location where this condition manifests itself.

                ShortConcept - reference to a terminology or just textAnatomical location, if relevant
                Comments

                Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.


                Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

                Control0..*
                This element is affected by the following invariants: ele-1
                BindingThe codes SHOULD be taken from For example codes, see SNOMEDCTBodyStructureshttp://hl7.org/fhir/ValueSet/body-site
                (preferred to http://hl7.org/fhir/ValueSet/body-site)
                TypeCodeableConcept(Codeable Concept (IPS))
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                36. Condition.subject
                Definition

                Indicates the patient or group who the condition record is associated with.

                ShortWho has the condition?
                Control1..1
                TypeReference(Patient (EU core), Patient, Group)
                Is Modifierfalse
                Summarytrue
                Requirements

                Group is typically used for veterinary or public health use cases.

                Alternate Namespatient
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                38. Condition.subject.reference
                Definition

                A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                ShortLiteral reference, Relative, internal or absolute URL
                Comments

                Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                Control10..1
                This element is affected by the following invariants: ref-1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                40. Condition.onset[x]
                Definition

                Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                ShortEstimated or actual date, date-time, or age
                Comments

                Age is generally used when the patient reports an age at which the Condition began to occur.

                Control0..1
                TypeChoice of: dateTime, Age, Period, Range, string
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Condition.onset[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • type @ $this
                • 42. Condition.onset[x]:onsetDateTime
                  Slice NameonsetDateTime
                  Definition

                  Onset of the symptom, complaint, functional limitation, complication or date of diagnosis. A ‘vague’ date, such as only the year or the month and the year, is permitted.


                  Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                  ShortEstimated or actual date, date-time, or age
                  Comments

                  Age is generally used when the patient reports an age at which the Condition began to occur.

                  Control0..1
                  TypedateTime, string, Period, Range, Age
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  44. Condition.abatement[x]
                  Definition

                  The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                  ShortWhen in resolution/remission
                  Comments

                  There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                  Control0..1
                  This element is affected by the following invariants: con-4
                  TypeChoice of: dateTime, Age, Period, Range, string
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Condition.abatement[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • type @ $this
                  • 46. Condition.abatement[x]:abatementDateTime
                    Slice NameabatementDateTime
                    Definition

                    The date or estimated date that the condition resolved or went into remission. A ‘vague’ date, such as only the year or the month and the year, is permitted


                    The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                    ShortWhen in resolution/remission
                    Comments

                    There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                    Control0..1
                    This element is affected by the following invariants: con-4
                    TypedateTime, string, Period, Range, Age
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    48. Condition.stage
                    Definition

                    Clinical stage or grade of a condition. May include formal severity assessments.

                    ShortStage/gradeStage/grade, usually assessed formally
                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Summaryfalse
                    Invariantscon-1: Stage SHALL have summary or assessment (summary.exists() or assessment.exists())
                    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    con-1: Stage SHALL have summary or assessment (summary.exists() or assessment.exists())
                    50. Condition.stage.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    52. Condition.stage.summary
                    Definition

                    A simple summary of the stage such as "Stage 3". The determination of the stage is disease-specific.

                    ShortMost recent Stage GroupSimple summary (disease specific)
                    Control0..1
                    This element is affected by the following invariants: con-1
                    BindingFor example codes, see ConditionStagehttp://hl7.org/fhir/ValueSet/condition-stage
                    (example to http://hl7.org/fhir/ValueSet/condition-stage)

                    Codes describing condition stages (e.g. Cancer stages).

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    54. Condition.stage.assessment
                    Definition

                    Reference to the evidence on which the staging assessment is based.


                    Reference to a formal record of the evidence on which the staging assessment is based.

                    ShortFormal record of assessment
                    Control0..*
                    This element is affected by the following invariants: con-1
                    TypeReference(ClinicalImpression, DiagnosticReport, Observation)
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    56. Condition.stage.type
                    Definition

                    The kind of staging, such as pathological or clinical staging.

                    ShortStaging system used.Kind of staging
                    Control0..1
                    BindingFor example codes, see ConditionStageTypehttp://hl7.org/fhir/ValueSet/condition-stage-type
                    (example to http://hl7.org/fhir/ValueSet/condition-stage-type)

                    Codes describing the kind of condition staging (e.g. clinical or pathological).

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    58. Condition.note
                    Definition

                    Comment by the one who determined or updated the Problem.


                    Additional information about the Condition. This is a general notes/comments entry for description of the Condition, its diagnosis and prognosis.

                    ShortAdditional information about the Condition
                    Control0..*
                    TypeAnnotation
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                    Guidance on how to interpret the contents of this table can be found here

                    0. Condition
                    Definition

                    A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

                    ShortDetailed information about conditions, problems or diagnoses
                    Control0..*
                    Is Modifierfalse
                    Impose ProfileThis profile also requires that the instance also conform this additional profile:
                    Summaryfalse
                    Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
                    con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
                    con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
                    dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                    dom-6: A resource should have narrative for robust management (text.`div`.exists())
                    2. Condition.id
                    Definition

                    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                    ShortLogical id of this artifact
                    Comments

                    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                    Control0..1
                    Typeid
                    Is Modifierfalse
                    Summarytrue
                    4. Condition.meta
                    Definition

                    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                    ShortMetadata about the resource
                    Control0..1
                    TypeMeta
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    6. Condition.implicitRules
                    Definition

                    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                    ShortA set of rules under which this content was created
                    Comments

                    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                    Control0..1
                    Typeuri
                    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    8. Condition.language
                    Definition

                    The base language in which the resource is written.

                    ShortLanguage of the resource content
                    Comments

                    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                    Control0..1
                    BindingThe codes SHOULD be taken from CommonLanguages
                    (preferred to http://hl7.org/fhir/ValueSet/languages)

                    A human language.

                    Additional BindingsPurpose
                    AllLanguagesMax Binding
                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    10. Condition.text
                    Definition

                    Human readable specification of the problem. This is a general notes/comments entry for description of the problem, its diagnosis and prognosis.

                    ShortText summary of the resource, for human interpretation
                    Comments

                    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                    Control0..1
                    TypeNarrative
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesnarrative, html, xhtml, display
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    12. Condition.contained
                    Definition

                    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                    ShortContained, inline Resources
                    Comments

                    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                    Control0..*
                    TypeResource
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesinline resources, anonymous resources, contained resources
                    14. Condition.extension
                    Definition

                    An Extension

                    ShortExtension
                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Condition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 16. Condition.extension:bodySite
                      Slice NamebodySite
                      Definition

                      Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

                      ShortTarget anatomic location or structure
                      Control0..1
                      TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
                      Is Modifierfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      18. Condition.extension:bodySite.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typeid
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      20. Condition.extension:bodySite.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..0
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Condition.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 22. Condition.extension:bodySite.url
                        Definition

                        Source of the definition for the extension code - a logical name or a URL.

                        Shortidentifies the meaning of the extension
                        Comments

                        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                        Control1..1
                        Typeuri
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        Fixed Valuehttp://hl7.org/fhir/StructureDefinition/bodySite
                        24. Condition.extension:bodySite.value[x]
                        Definition

                        Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                        ShortValue of extension
                        Control1..1
                        This element is affected by the following invariants: ext-1
                        TypeReference(Body structure: Laboratory)
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        26. Condition.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                        Summaryfalse
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        28. Condition.identifier
                        Definition

                        Globally unique identifier of this problem which remain constant as the resource is updated and propagates from server to server.

                        ShortExternal Ids for this condition
                        Comments

                        This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

                        NoteThis is a business identifier, not a resource identifier (see discussion)
                        Control0..*
                        TypeIdentifier
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        30. Condition.clinicalStatus
                        Definition

                        The problem status describes the condition of the problem:

                        1. Active problems are problems of which the patient experiences symptoms or for which evidence exists.

                        2. If condition is abated, then clinicalStatus must be either inactive, resolved, or remission.

                        3. Problems with the status 'Inactive' refer to problems that don't affect the patient anymore or that of which there is no evidence of existence anymore.

                        ShortConcept - reference to a terminology or just text
                        Comments

                        Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        BindingThe codes SHALL be taken from ConditionClinicalStatusCodes
                        (required to http://hl7.org/fhir/ValueSet/condition-clinical)
                        TypeCodeableConcept(Codeable Concept (IPS))
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        32. Condition.verificationStatus
                        Definition

                        A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

                        ShortConcept - reference to a terminology or just text
                        Comments

                        Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        BindingThe codes SHALL be taken from ConditionVerificationStatus
                        (required to http://hl7.org/fhir/ValueSet/condition-ver-status)
                        TypeCodeableConcept(Codeable Concept (IPS))
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        34. Condition.category
                        Definition

                        Slices per type of classificaton

                        Shortcategory codes
                        Comments

                        The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

                        Control0..*
                        BindingUnless not suitable, these codes SHALL be taken from ConditionCategoryCodes
                        (extensible to http://hl7.org/fhir/ValueSet/condition-category)

                        A category assigned to the condition.

                        TypeCodeableConcept(Codeable Concept (IPS))
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on Condition.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ $this
                        • 36. Condition.category:poa
                          Slice Namepoa
                          Definition

                          Present on admission, Hospital acquired condition, Not applicable or unknown

                          ShortPOA, HAC, NA
                          Comments

                          The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

                          Control0..1
                          BindingThe codes SHALL be taken from Condition Present on Admission (POA) Value Set
                          (required to http://hl7.eu/fhir/hdr/ValueSet/poa-indicator-eu-hdr)
                          TypeCodeableConcept
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          38. Condition.category:treated
                          Slice Nametreated
                          Definition

                          Class of the problem (treated, other) in relation to the hospital encounter. Treated problems were treated or affected provisioning of care (diagnostics, therapy, nursing, monitoring) during the hospital encounter. At least one problem should be marked as Treated. Other problems are recorded only if they are important for continuity of care (after discharge).

                          ShortTreated or untreated
                          Comments

                          The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

                          Control0..1
                          BindingThe codes SHALL be taken from Treatment Class Value Set
                          (required to http://hl7.eu/fhir/hdr/ValueSet/treated-problem-eu-hdr)
                          TypeCodeableConcept
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          40. Condition.severity
                          Definition

                          A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

                          ShortConcept - reference to a terminology or just text
                          Comments

                          Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

                          Control0..1
                          This element is affected by the following invariants: ele-1
                          BindingThe codes SHOULD be taken from Condition/DiagnosisSeverity
                          (preferred to http://hl7.org/fhir/ValueSet/condition-severity)
                          TypeCodeableConcept(Codeable Concept (IPS))
                          Is Modifierfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          42. Condition.code
                          Definition

                          The problem code specifies the problem. Depending on the setting, different code systems can be used. The ProblemCodelist provides an overview of the possible code systems.

                          ShortConcept - reference to a terminology or just text
                          Comments

                          Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

                          Control1..1
                          This element is affected by the following invariants: ele-1
                          BindingThe codes SHOULD be taken from Condition Value Set
                          (preferred to http://hl7.eu/fhir/hdr/ValueSet/condition-eu-hdr)

                          Valueset to describe the actual problem experienced by the patient

                          TypeCodeableConcept(Codeable Concept (IPS))
                          Is Modifierfalse
                          Requirements

                          0..1 to account for primarily narrative only resources.

                          Alternate Namestype
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          44. Condition.bodySite
                          Definition

                          A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

                          ShortConcept - reference to a terminology or just text
                          Comments

                          Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

                          Control0..*
                          This element is affected by the following invariants: ele-1
                          BindingThe codes SHOULD be taken from SNOMEDCTBodyStructures
                          (preferred to http://hl7.org/fhir/ValueSet/body-site)
                          TypeCodeableConcept(Codeable Concept (IPS))
                          Is Modifierfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          46. Condition.subject
                          Definition

                          Indicates the patient or group who the condition record is associated with.

                          ShortWho has the condition?
                          Control1..1
                          TypeReference(Patient (EU core))
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Group is typically used for veterinary or public health use cases.

                          Alternate Namespatient
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          48. Condition.subject.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          50. Condition.subject.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Condition.subject.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 52. Condition.subject.reference
                            Definition

                            A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                            ShortLiteral reference, Relative, internal or absolute URL
                            Comments

                            Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                            Control1..1
                            This element is affected by the following invariants: ref-1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            54. Condition.subject.type
                            Definition

                            The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                            The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                            ShortType the reference refers to (e.g. "Patient")
                            Comments

                            This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                            Control0..1
                            BindingUnless not suitable, these codes SHALL be taken from ResourceType
                            (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                            Aa resource (or, for logical models, the URI of the logical model).

                            Typeuri
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            56. Condition.subject.identifier
                            Definition

                            An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                            ShortLogical reference, when literal reference is not known
                            Comments

                            When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                            When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                            Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                            Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                            NoteThis is a business identifier, not a resource identifier (see discussion)
                            Control0..1
                            TypeIdentifier
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            58. Condition.subject.display
                            Definition

                            Plain text narrative that identifies the resource in addition to the resource reference.

                            ShortText alternative for the resource
                            Comments

                            This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            60. Condition.encounter
                            Definition

                            The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

                            ShortEncounter created as part of
                            Comments

                            This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

                            Control0..1
                            TypeReference(Encounter)
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            62. Condition.onset[x]
                            Definition

                            Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                            ShortEstimated or actual date, date-time, or age
                            Comments

                            Age is generally used when the patient reports an age at which the Condition began to occur.

                            Control0..1
                            TypeChoice of: dateTime, Age, Period, Range, string
                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            SlicingThis element introduces a set of slices on Condition.onset[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • type @ $this
                            • 64. Condition.onset[x]:onsetDateTime
                              Slice NameonsetDateTime
                              Definition

                              Onset of the symptom, complaint, functional limitation, complication or date of diagnosis. A ‘vague’ date, such as only the year or the month and the year, is permitted.

                              ShortEstimated or actual date, date-time, or age
                              Comments

                              Age is generally used when the patient reports an age at which the Condition began to occur.

                              Control0..1
                              TypedateTime
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              66. Condition.abatement[x]
                              Definition

                              The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                              ShortWhen in resolution/remission
                              Comments

                              There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                              Control0..1
                              This element is affected by the following invariants: con-4
                              TypeChoice of: dateTime, Age, Period, Range, string
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              SlicingThis element introduces a set of slices on Condition.abatement[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • type @ $this
                              • 68. Condition.abatement[x]:abatementDateTime
                                Slice NameabatementDateTime
                                Definition

                                The date or estimated date that the condition resolved or went into remission. A ‘vague’ date, such as only the year or the month and the year, is permitted

                                ShortWhen in resolution/remission
                                Comments

                                There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                                Control0..1
                                This element is affected by the following invariants: con-4
                                TypedateTime
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                70. Condition.recordedDate
                                Definition

                                The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

                                ShortDate record was first recorded
                                Control0..1
                                TypedateTime
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                72. Condition.recorder
                                Definition

                                Individual who recorded the record and takes responsibility for its content.

                                ShortWho recorded the condition
                                Control0..1
                                TypeReference(Practitioner, PractitionerRole, Patient, RelatedPerson)
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                74. Condition.asserter
                                Definition

                                Individual who is making the condition statement.

                                ShortPerson who asserts this condition
                                Control0..1
                                TypeReference(Practitioner, PractitionerRole, Patient, RelatedPerson)
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                76. Condition.stage
                                Definition

                                Clinical stage or grade of a condition. May include formal severity assessments.

                                ShortStage/grade
                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Summaryfalse
                                Invariantscon-1: Stage SHALL have summary or assessment (summary.exists() or assessment.exists())
                                ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                78. Condition.stage.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                80. Condition.stage.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                82. Condition.stage.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                84. Condition.stage.summary
                                Definition

                                A simple summary of the stage such as "Stage 3". The determination of the stage is disease-specific.

                                ShortMost recent Stage Group
                                Control0..1
                                This element is affected by the following invariants: con-1
                                BindingFor example codes, see ConditionStage
                                (example to http://hl7.org/fhir/ValueSet/condition-stage)

                                Codes describing condition stages (e.g. Cancer stages).

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                86. Condition.stage.assessment
                                Definition

                                Reference to the evidence on which the staging assessment is based.

                                ShortFormal record of assessment
                                Control0..*
                                This element is affected by the following invariants: con-1
                                TypeReference(ClinicalImpression, DiagnosticReport, Observation)
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                88. Condition.stage.type
                                Definition

                                The kind of staging, such as pathological or clinical staging.

                                ShortStaging system used.
                                Control0..1
                                BindingFor example codes, see ConditionStageType
                                (example to http://hl7.org/fhir/ValueSet/condition-stage-type)

                                Codes describing the kind of condition staging (e.g. clinical or pathological).

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                90. Condition.evidence
                                Definition

                                Supporting evidence / manifestations that are the basis of the Condition's verification status, such as evidence that confirmed or refuted the condition.

                                ShortSupporting evidence
                                Comments

                                The evidence may be a simple list of coded symptoms/manifestations, or references to observations or formal assessments, or both.

                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Summaryfalse
                                Invariantscon-2: evidence SHALL have code or details (code.exists() or detail.exists())
                                ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                92. Condition.evidence.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                94. Condition.evidence.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                96. Condition.evidence.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                98. Condition.evidence.code
                                Definition

                                A manifestation or symptom that led to the recording of this condition.

                                ShortManifestation/symptom
                                Control0..*
                                This element is affected by the following invariants: con-2
                                BindingFor example codes, see ManifestationAndSymptomCodes
                                (example to http://hl7.org/fhir/ValueSet/manifestation-or-symptom)

                                Codes that describe the manifestation or symptoms of a condition.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                100. Condition.evidence.detail
                                Definition

                                Links to other relevant information, including pathology reports.

                                ShortSupporting information found elsewhere
                                Control0..*
                                This element is affected by the following invariants: con-2
                                TypeReference(Resource)
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                102. Condition.note
                                Definition

                                Comment by the one who determined or updated the Problem.

                                ShortAdditional information about the Condition
                                Control0..*
                                TypeAnnotation
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))