臺灣榮總腦中風實作指引(TW VGH Stroke IG)
0.1.0 - ci-build

臺灣榮總腦中風實作指引(TW VGH Stroke IG), published by 高雄榮民總醫院 (VGHKS). This guide is not an authorized publication; it is the continuous build for version 0.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/SitatechCo/TWVGHStroke_IG_Build/ and changes regularly. See the Directory of published versions

Resource Profile: StrokeCaseManagementBundle - Detailed Descriptions

Draft as of 2026-10-07

Definitions for the StrokeCaseManagementBundle resource profile.

See the documentation on how to interpret the contents of this table

0. Bundle
Definition

用於存於一組Resources的結構或物件


A container for a collection of resources.

Short包含resourceBundleContains a collection of resources
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsbdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited (entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history')))
bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited (entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history')))
bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) ((type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct())
bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
bdl-10: A document must have a date (type = 'document' implies (timestamp.hasValue()))
bdl-11: A document must have a Composition as the first resource (type = 'document' implies entry.first().resource.is(Composition))
bdl-12: A message must have a MessageHeader as the first resource (type = 'message' implies entry.first().resource.is(MessageHeader))
stroke-cm-bundle-1: Bundle 內所有資源的 subject 與 patient 都參照本 Bundle 的 Patient entry:參照值等於該 entry 的 fullUrl,或是 fullUrl 結尾的「資源類型/id」。 ((entry.resource.ofType(Observation).subject | entry.resource.ofType(Condition).subject | entry.resource.ofType(Encounter).subject | entry.resource.ofType(QuestionnaireResponse).subject | entry.resource.ofType(MedicationStatement).subject | entry.resource.ofType(MedicationAdministration).subject | entry.resource.ofType(Procedure).subject | entry.resource.ofType(ImagingStudy).subject | entry.resource.ofType(Consent).patient).all(reference = %resource.entry.where(resource is Patient).fullUrl.first() or (reference.startsWith('Patient/') and %resource.entry.where(resource is Patient).fullUrl.first().endsWith('/' + reference))))
stroke-cm-bundle-2: 同一包的 fullUrl 全部使用 urn:uuid,或全部與 Patient entry 使用相同的 base 網址,讓包內的相對參照都解析到包內資源。 (entry.fullUrl.all(startsWith('urn:uuid:')) or entry.fullUrl.all(replaceMatches('[A-Za-z]+/[^/]+$', '') = %resource.entry.where(resource is Patient).fullUrl.first().replaceMatches('Patient/[^/]+$', '')))
bdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited (entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history')))
bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited (entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history')))
bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) ((type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct())
bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
bdl-10: A document must have a date (type = 'document' implies (timestamp.hasValue()))
bdl-11: A document must have a Composition as the first resource (type = 'document' implies entry.first().resource.is(Composition))
bdl-12: A message must have a MessageHeader as the first resource (type = 'message' implies entry.first().resource.is(MessageHeader))
2. Bundle.implicitRules
Definition

構建resource時遵循的一系列規則的參照,在處理內容時必須理解這些規則。通常這是對IG所定義之特殊規則及其他profiles的參照。


A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Short創建此內容所依據的一組規則A set of rules under which this content was created
Comments

宣告這套規則限制了內容只能被有限的交易夥伴所理解。這從本質上限制了資料的長期有用性。然而,現有的健康生態體系高度分裂,還沒有準備好以普遍可計算的方式定義、收集和交換資料。只要有可能,實作者和/或規範編寫者應該避免使用這個資料項目。通常在使用時,此URL是對IG的參照,此IG將這些特殊規則與其他profiles、value sets等一起定義為其敘述的一部分。


Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Bundle.identifier
Definition

填入個管流水序號,與本包 StrokeRegistryResponse 的 identifier 相同。個管流水序號搭配病歷號(StrokePatient 的 identifier)識別一個個管事件。


A persistent identifier for the bundle that won't change as a bundle is copied from server to server.

Short個管事件識別碼。[應填入個管流水序號]Persistent identifier for the bundle
Comments

永久的識別通常只對Document、Message和Collection的批次處理是重要。它通常不會被填入到searh和history的結果中,伺服器在處理batches和transactions時會忽略Bundle.identifier。但對於Documents的identifier 必須(SHALL) 被填入,其為全球唯一的識別碼。


Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..1
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Bundle.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Bundle.identifier.system
Definition

與 StrokeRegistryResponse 的個管流水序號使用同一個系統網址。範例使用 http://www.vghks.gov.tw/stroke-case-management-serial。


Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Short識別碼系統。[個管流水序號的系統網址]The namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExampleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Bundle.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

Short個管流水序號。[原樣填入,保留前置零]The value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
ExampleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Bundle.type
Definition

表明這個Bundle的目的-期望如何使用。


Indicates the purpose of this bundle - how it is intended to be used.

ShortBundle 類型。[固定為 collection]document | message | transaction | transaction-response | batch | batch-response | history | searchset | collection
Comments

Bundle也可以用於其他目的(例如,document可以作為transaction被接受)。這主要是為了給某些Bundle類型制定特定的規則。


It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types.

Control1..1
BindingThe codes SHALL be taken from BundleTypehttp://hl7.org/fhir/ValueSet/bundle-type|4.0.1
(required to http://hl7.org/fhir/ValueSet/bundle-type|4.0.1)

Bundle類型;應填入所綁定值集中的其中一個代碼。


Indicates the purpose of a bundle - how it is intended to be used.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuecollection
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Bundle.timestamp
Definition

組成本包的時間,精確到秒並帶時區,由組包系統依其時鐘填寫。


The date/time that the bundle was assembled - i.e. when the resources were placed in the bundle.

Short組包時間。[YYYY-MM-DDThh:mm:ss+時區,例如 +08:00]When the bundle was assembled
Comments

對很多Bundle而言,時間戳記同等於.meta.lastUpdated,因為它們不會被儲存(例如:查詢結果)。當一個Bundl被放置在一個持久化存儲中(a persistent store)時,.meta.lastUpdated通常會被伺服器改變。當Bundle是一個Message時,中介軟體(即使沒有存儲)**建議應該(SHOULD)更新.meta.lastUpdated。.timestamp用於追踪Bundle的原始時間,並且建議應該(SHOULD)**被填入。

使用方法:

  • document : 文件的創建日期。注意:composition的創建可能早於Bundle的創鍵,或者composition會與多個文件相關聯。composition的編輯日期可能早於Bundle的組成時間。
  • mssage:訊息內容被組成的日期。這個日期不會被中介軟體引擎改變,除非他們增加了額外的資料,改變了訊息的時間含義。
  • history : 歷史紀錄被組成的日期。這個時間將被用於查詢_since(自此)時間後的後續更新紀錄。
  • searchset : 查詢結果集:是指查詢結果組合起來的時間。要注意的是,不同的頁面**可能(MAY)**會有不同的時間標記,但不是必須的。即使時間標記不同,也不代表隨後的頁面會顯示或包含從最初查詢後所做的變更。

transaction | transaction-response | batch | batch-response | collection : 沒有特別指定的含義。 時間戳記的值應該比Bundle中的resources的 lastUpdated 和其他時間戳記還要新,而且應該等於或早於Bundle本身的 .meta.lastUpdated 相同或更早。


For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated.

Usage:

  • document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time
  • message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message
  • history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates
  • searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query
  • transaction | transaction-response | batch | batch-response | collection : no particular assigned meaning

The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself.

Control10..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Bundle.entry
Definition

每個 entry 放一筆本個管事件的資源,只能放下列 Slice 的 Profile。資源之間的參照依各 entry 的 fullUrl 解析。


An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

Short資料包內容。[每個 entry 放一筆資源]Entry in the bundle - will have a resource or information
Control20..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
SlicingThis element introduces a set of slices on Bundle.entry. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
  • profile @ resource
  • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

    18. Bundle.entry.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. Bundle.entry.fullUrl
    Definition

    填 RESTful 網址時,結尾的「資源類型/id」須與 resource 的類型及 id 相同;填 urn:uuid 時,其他資源以同一個 urn:uuid 參照本資源。同一包的 fullUrl 全部使用 urn:uuid,或全部與 Patient entry 使用相同的 base 網址,讓包內的相對參照都解析到包內資源。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    Short資源完整網址。[base 網址加上「資源類型/id」,或 urn:uuid]URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Bundle.entry.resource
    Definition

    Bundle中的resource。resource的目的/含義由 Bundle.type 決定。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short資源。[應填入下列 Slice 的 Profile]A resource in the bundle
    Control10..1
    TypeResource
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    24. Bundle.entry:patient
    Slice Namepatient
    Definition

    本個管事件的病人。包內其他資源的 subject 與 patient 都參照這一筆。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short病人。[應填入 StrokePatient,每包一筆]Entry in the bundle - will have a resource or information
    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    26. Bundle.entry:patient.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    28. Bundle.entry:patient.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. Bundle.entry:patient.resource
    Definition

    關於接受照護或其他健康相關服務的個人或動物的人口統計學和其他行政資訊。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short接受健康照護服務的個人或動物之資訊A resource in the bundle
    Control0..1
    TypePatientResource(腦中風-病人基本資料 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesSubjectOfCare Client Resident
    32. Bundle.entry:organization
    Slice Nameorganization
    Definition

    包內資源參照的院所,例如病歷號的核發院所。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short醫療院所。[應填入 StrokeOrganization]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    34. Bundle.entry:organization.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    36. Bundle.entry:organization.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Bundle.entry:organization.resource
    Definition

    為實現某種形式的集體行動而形成的正式或非正式認可的一群人或機構的團體。包括公司、機構、企業、部門、社群團體、健康照護實務團體、付款人/保險公司等。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short具有共同目的的一群人或機構A resource in the bundle
    Control0..1
    TypeOrganizationResource(腦中風-醫療院所 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    40. Bundle.entry:encounter
    Slice Nameencounter
    Definition

    本個管事件的急診與住院就醫,各建一筆。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short就醫事件。[應填入 StrokeEncounter]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    42. Bundle.entry:encounter.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    44. Bundle.entry:encounter.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Bundle.entry:encounter.resource
    Definition

    病人和健康照護服務提供者之間的互動,目的是提供健康照護服務或評估病人的健康狀況。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short提供病人服務的一種互動A resource in the bundle
    Control0..1
    TypeEncounterResource(腦中風-就醫事件 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVisit
    48. Bundle.entry:registryResponse
    Slice NameregistryResponse
    Definition

    本個管事件的個管系統回覆,identifier 與 Bundle 的 identifier 相同。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short登錄表單回覆。[應填入 StrokeRegistryResponse]Entry in the bundle - will have a resource or information
    Control10..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    50. Bundle.entry:registryResponse.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    52. Bundle.entry:registryResponse.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Bundle.entry:registryResponse.resource
    Definition

    Sets expectations for supported capabilities for questionnaire responses for SDC-conformant systems.


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    ShortSDC Questionnaire ResponseA resource in the bundle
    Comments

    The QuestionnaireResponse contains enough information about the questions asked and their organization that it can be interpreted somewhat independently from the Questionnaire it is based on. I.e. You don't need access to the Questionnaire in order to extract basic information from a QuestionnaireResponse.

    Control0..1
    TypeQuestionnaireResponseResource(腦中風-登錄表單回覆 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Alternate NamesForm, QuestionnaireAnswers, Form Data
    56. Bundle.entry:provenance
    Slice Nameprovenance
    Definition

    本次匯入的追溯紀錄,target 參照本包的資源。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short資料來源追溯。[應填入 StrokeProvenance]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    58. Bundle.entry:provenance.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    60. Bundle.entry:provenance.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    62. Bundle.entry:provenance.resource
    Definition

    Provenance of a resource is a record that describes entities and processes involved in producing and delivering or otherwise influencing that resource. Provenance provides a critical foundation for assessing authenticity, enabling trust, and allowing reproducibility. Provenance assertions are a form of contextual metadata and can themselves become important records with their own provenance. Provenance statement indicates clinical significance in terms of confidence in authenticity, reliability, and trustworthiness, integrity, and stage in lifecycle (e.g. Document Completion - has the artifact been legally authenticated), all of which may impact security, privacy, and trust policies.


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    ShortWho, What, When for a set of resourcesA resource in the bundle
    Comments

    Some parties may be duplicated between the target resource and its provenance. For instance, the prescriber is usually (but not always) the author of the prescription resource. This resource is defined with close consideration for W3C Provenance.

    Control0..1
    TypeProvenanceResource(腦中風-資料來源追溯 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesHistory, Event, Activity
    64. Bundle.entry:condition
    Slice Namecondition
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short中風診斷。[應填入 StrokeCondition]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    66. Bundle.entry:condition.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    68. Bundle.entry:condition.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    70. Bundle.entry:condition.resource
    Definition

    一個臨床病情、問題、診斷或其他事件、情況、或臨床概念,已上升到需要關注的程度。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short有關病情、問題或診斷的詳細資訊A resource in the bundle
    Control0..1
    TypeConditionResource(腦中風-中風診斷 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    72. Bundle.entry:admissionContext
    Slice NameadmissionContext
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short就醫背景。[應填入 StrokeAdmissionContext]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    74. Bundle.entry:admissionContext.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    76. Bundle.entry:admissionContext.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    78. Bundle.entry:admissionContext.resource
    Definition

    描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short健康狀態篩檢與評估A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-就醫背景 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    80. Bundle.entry:onsetTime
    Slice NameonsetTime
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short發病時間。[應填入 StrokeOnsetTime]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    82. Bundle.entry:onsetTime.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    84. Bundle.entry:onsetTime.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    86. Bundle.entry:onsetTime.resource
    Definition

    描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short健康狀態篩檢與評估A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-發病時間 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    88. Bundle.entry:riskFactor
    Slice NameriskFactor
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short危險因子與病史。[應填入 StrokeRiskFactor]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    90. Bundle.entry:riskFactor.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    92. Bundle.entry:riskFactor.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    94. Bundle.entry:riskFactor.resource
    Definition

    描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short健康狀態篩檢與評估A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-危險因子與病史 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    96. Bundle.entry:clinicalAssessment
    Slice NameclinicalAssessment
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short中風分類評估。[應填入 StrokeClinicalAssessment]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    98. Bundle.entry:clinicalAssessment.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    100. Bundle.entry:clinicalAssessment.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    102. Bundle.entry:clinicalAssessment.resource
    Definition

    描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short健康狀態篩檢與評估A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-中風分類評估 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    104. Bundle.entry:careProcess
    Slice NamecareProcess
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short照護流程紀錄。[應填入 StrokeCareProcess]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    106. Bundle.entry:careProcess.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    108. Bundle.entry:careProcess.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    110. Bundle.entry:careProcess.resource
    Definition

    描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short健康狀態篩檢與評估A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-照護流程紀錄 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    112. Bundle.entry:complication
    Slice Namecomplication
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short住院併發症與惡化。[應填入 StrokeComplication]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    114. Bundle.entry:complication.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    116. Bundle.entry:complication.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    118. Bundle.entry:complication.resource
    Definition

    描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short健康狀態篩檢與評估A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-住院併發症與惡化 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    120. Bundle.entry:nihss
    Slice Namenihss
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    ShortNIHSS 評估。[應填入 StrokeNIHSS]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    122. Bundle.entry:nihss.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    124. Bundle.entry:nihss.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    126. Bundle.entry:nihss.resource
    Definition

    描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short健康狀態篩檢與評估A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-NIHSS 評估 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    128. Bundle.entry:mrs
    Slice Namemrs
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    ShortmRS 評估。[應填入 StrokeMRS]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    130. Bundle.entry:mrs.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    132. Bundle.entry:mrs.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    134. Bundle.entry:mrs.resource
    Definition

    描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short健康狀態篩檢與評估A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-mRS 評估 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    136. Bundle.entry:gcs
    Slice Namegcs
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short昏迷指數。[應填入 StrokeGCS]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    138. Bundle.entry:gcs.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    140. Bundle.entry:gcs.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    142. Bundle.entry:gcs.resource
    Definition

    描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short健康狀態篩檢與評估A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-昏迷指數 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    144. Bundle.entry:bodyHeight
    Slice NamebodyHeight
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short身高。[應填入 StrokeBodyHeight]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    146. Bundle.entry:bodyHeight.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    148. Bundle.entry:bodyHeight.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    150. Bundle.entry:bodyHeight.resource
    Definition

    關於測量和檢查結果的測量,對患者、裝置或其他主體的評估,或健康相關觀察或事件的確認。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short身高相關測量A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-身高 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    152. Bundle.entry:bodyWeight
    Slice NamebodyWeight
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short體重。[應填入 StrokeBodyWeight]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    154. Bundle.entry:bodyWeight.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    156. Bundle.entry:bodyWeight.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    158. Bundle.entry:bodyWeight.resource
    Definition

    此 Profile 用於描述個案於特定時點的體重觀察資料,包含數值、單位、執行者、相關事件等資訊。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short用於記錄個案的體重觀察結果(Body Weight Observation)A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-體重 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    160. Bundle.entry:bodyTemperature
    Slice NamebodyTemperature
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short體溫。[應填入 StrokeBodyTemperature]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    162. Bundle.entry:bodyTemperature.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    164. Bundle.entry:bodyTemperature.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    166. Bundle.entry:bodyTemperature.resource
    Definition

    測量身體產生的熱量。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short體溫測量結果A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-體溫 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    168. Bundle.entry:heartRate
    Slice NameheartRate
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short心率。[應填入 StrokeHeartRate]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    170. Bundle.entry:heartRate.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    172. Bundle.entry:heartRate.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    174. Bundle.entry:heartRate.resource
    Definition

    測量心臟每分鐘跳動的次數。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short心率測量結果A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-心率 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    176. Bundle.entry:respiratoryRate
    Slice NamerespiratoryRate
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short呼吸速率。[應填入 StrokeRespiratoryRate]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    178. Bundle.entry:respiratoryRate.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    180. Bundle.entry:respiratoryRate.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    182. Bundle.entry:respiratoryRate.resource
    Definition

    The FHIR Vitals Signs profile 為觀察資源記錄、搜尋和取得與病患相關的生命徵象設定了最低期望值。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short呼吸速率觀察紀錄A resource in the bundle
    Comments

    用於簡單觀察,如儀器量測、實驗室原子結果、生命體徵、身高、體重、吸菸狀態、備註等。其他資源則用於提供觀察的上下文,例如實驗室報告等。

    Control0..1
    TypeObservationResource(腦中風-呼吸速率 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    184. Bundle.entry:bloodPressure
    Slice NamebloodPressure
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short血壓。[應填入 StrokeBloodPressure]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    186. Bundle.entry:bloodPressure.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    188. Bundle.entry:bloodPressure.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    190. Bundle.entry:bloodPressure.resource
    Definition

    This profile defines how to represent Blood Pressure observations in FHIR using a standard LOINC code and UCUM units of measure. This is a grouping structure. It has no value in Observation.valueQuantity but contains at least one component (systolic and/or diastolic).


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    ShortFHIR Blood Pressure ProfileA resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-血壓 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    192. Bundle.entry:occupation
    Slice Nameoccupation
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short職業。[應填入 StrokeOccupation]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    194. Bundle.entry:occupation.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    196. Bundle.entry:occupation.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    198. Bundle.entry:occupation.resource
    Definition

    關於病人、裝置或其他主體的測量與簡單陳述。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short測量與簡單陳述A resource in the bundle
    Comments

    用於簡單觀察,例如裝置測量、實驗室原子結果、生命徵象、身高、體重、吸菸狀態、備註等。其他資源則用於提供觀察的上下文,例如實驗室報告等。

    Control0..1
    TypeObservationResource(腦中風-職業 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    200. Bundle.entry:smokingStatus
    Slice NamesmokingStatus
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short吸菸狀態。[應填入 StrokeSmokingStatus]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    202. Bundle.entry:smokingStatus.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    204. Bundle.entry:smokingStatus.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    206. Bundle.entry:smokingStatus.resource
    Definition

    關於病患吸菸習慣與狀態的觀察結果紀錄。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short吸菸狀態觀察值A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-吸菸狀態 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    208. Bundle.entry:laboratory
    Slice Namelaboratory
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short檢驗結果。[應填入 StrokeLaboratory]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    210. Bundle.entry:laboratory.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    212. Bundle.entry:laboratory.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    214. Bundle.entry:laboratory.resource
    Definition

    對病人、設備或其他對象進行的測量和簡單判定。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short檢驗檢查,測量及簡單的判定。A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-檢驗結果 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    216. Bundle.entry:procedureResult
    Slice NameprocedureResult
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short處置時點結果。[應填入 StrokeProcedureResult]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    218. Bundle.entry:procedureResult.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    220. Bundle.entry:procedureResult.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    222. Bundle.entry:procedureResult.resource
    Definition

    對病人、設備或其他對象進行的測量和簡單判定。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short檢驗檢查,測量及簡單的判定。A resource in the bundle
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..1
    TypeObservationResource(腦中風-處置時點結果 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    224. Bundle.entry:medicationStatement
    Slice NamemedicationStatement
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short用藥紀錄。[應填入 StrokeMedicationStatement]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    226. Bundle.entry:medicationStatement.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    228. Bundle.entry:medicationStatement.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    230. Bundle.entry:medicationStatement.resource
    Definition

    病人正在服藥的紀錄。一份 MedicationStatement(用藥聲明)可能表明病人目前正在、曾經或將來會服藥。此資訊的來源可能是病人、重要他人(如家庭成員或配偶)或臨床醫生。病人就診或住院期間的病史記錄過程是獲取此類資訊的常見場景。藥品資訊可能來自病人的記憶、處方瓶或病人、臨床醫師或其他方維護的藥品清單。 用藥聲明(medication statement)與給藥(medication administration)之間的主要區別在於:給藥具有完整的用藥資訊,並且基於實際由給藥者提供的用藥資訊為基礎。相對而言,用藥聲明通常較為籠統,不會具體記錄用藥的日期或時間,實際上,我們只知道有來源報告說病人目前正在服用這種藥品,但關於用藥的時間、劑量、比例甚至藥物產品的詳細資訊可能不完整、缺失或不太精確。正如前面所提到的,用藥聲明的資訊可能來自病人的記憶、處方瓶或病人、臨床醫生或其他人維護的藥品清單。相比之下,給藥紀錄則更為正式,包含了詳細的用藥資訊。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short病人正在服用的藥品紀錄A resource in the bundle
    Comments

    當解釋用藥聲明時,需要考慮「狀態(status)」和「未服用(NotTaken)」的值:

    MedicationStatement.status + MedicationStatement.wasNotTaken

    • 當status=目前正在發生(Active)+ wasNotTaken=是(T),則 表示目前沒有在服用。
    • 當status=已完成(Completed) + wasNotTaken=是(T) ,則表示過去沒有服用過。
    • 當status=計劃中(Intended) + wasNotTaken=是(T) ,則表示沒有服用的意圖。
    • 當status=目前正在發生(Active) + wasNotTaken=否(F) ,則表示正在服用,但不是按處方服用。
    • 當status=目前(Active) + wasNotTaken=否(F),則表示正在服用。
    • 當status=計劃中(Intended)+ wasNotTaken=否(F),則表示將要服用(尚未開始)。
    • 當status=已完成(Completed) + wasNotTaken=否(F) ,則表示過去已經服用過。
    • 當status=錯誤(In Error)+ wasNotTaken=不適用(N/A),則表示錯誤情況。
    Control0..1
    TypeMedicationStatementResource(腦中風-用藥紀錄 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    232. Bundle.entry:medicationAdministration
    Slice NamemedicationAdministration
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short給藥紀錄。[應填入 StrokeMedicationAdministration]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    234. Bundle.entry:medicationAdministration.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    236. Bundle.entry:medicationAdministration.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    238. Bundle.entry:medicationAdministration.resource
    Definition

    Describes the event of a patient consuming or otherwise being administered a medication. This may be as simple as swallowing a tablet or it may be a long running infusion. Related resources tie this event to the authorizing prescription, and the specific encounter between patient and health care practitioner.


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    ShortAdministration of medication to a patientA resource in the bundle
    Control0..1
    TypeMedicationAdministrationResource(腦中風-給藥紀錄 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    240. Bundle.entry:procedure
    Slice Nameprocedure
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short醫療處置。[應填入 StrokeProcedure]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    242. Bundle.entry:procedure.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    244. Bundle.entry:procedure.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    246. Bundle.entry:procedure.resource
    Definition

    正在或曾經對病人執行的動作。這可以是像手術這樣的身體介入,也可以是像長照服務、諮詢或催眠療法這樣的非侵入性介入。HL7 FHIR官網另有提到的例子包括例如包括診斷處置/手術、內視鏡處置/手術、活體組織切片、諮詢、物理治療、個人支持服務、日照服務、非緊急運輸、改善家居設施、健身活動等。處置/手術可以由醫護人員、服務提供人員、朋友或親屬或在某些情況下由病人自己執行。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short正在或曾經對病人執行的動作A resource in the bundle
    Control0..1
    TypeProcedureResource(腦中風-醫療處置 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse
    248. Bundle.entry:imagingStudy
    Slice NameimagingStudy
    Definition

    Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    Short影像檢查。[應填入 StrokeImagingStudy]Entry in the bundle - will have a resource or information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    250. Bundle.entry:imagingStudy.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    252. Bundle.entry:imagingStudy.fullUrl
    Definition

    resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

    在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。


    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
    • Results from operations might involve resources that are not identified.
    ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)URI for resource (Absolute URL server address or URI for UUID/OID)
    Comments

    fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

    請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。


    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    254. Bundle.entry:imagingStudy.resource
    Definition

    DICOM影像檢查中產生的內容。每項檢查包含若干系列(series),每一系列只使用一種影像儀器(例如X光、電腦斷層掃描CT、核磁共振MR、超音波等),每個系列由在相同背景下獲得或製作的服務-物件對實例(Service-Object Pair Instances,簡稱SOP實例,包含影像或其他類型的資料)所組成。但一項檢查中可能包括多個使用不同影像儀器的系列。


    The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

    Short在單一檢查中產生的一組影像【一個或多個系列(series)的參照影像】A resource in the bundle
    Control0..1
    TypeImagingStudyResource(腦中風-影像檢查 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
    Is Modifierfalse
    Summaryfalse

    See the documentation on how to interpret the contents of this table

    0. Bundle
    Invariantsstroke-cm-bundle-1: Bundle 內所有資源的 subject 與 patient 都參照本 Bundle 的 Patient entry:參照值等於該 entry 的 fullUrl,或是 fullUrl 結尾的「資源類型/id」。 ((entry.resource.ofType(Observation).subject | entry.resource.ofType(Condition).subject | entry.resource.ofType(Encounter).subject | entry.resource.ofType(QuestionnaireResponse).subject | entry.resource.ofType(MedicationStatement).subject | entry.resource.ofType(MedicationAdministration).subject | entry.resource.ofType(Procedure).subject | entry.resource.ofType(ImagingStudy).subject | entry.resource.ofType(Consent).patient).all(reference = %resource.entry.where(resource is Patient).fullUrl.first() or (reference.startsWith('Patient/') and %resource.entry.where(resource is Patient).fullUrl.first().endsWith('/' + reference))))
    stroke-cm-bundle-2: 同一包的 fullUrl 全部使用 urn:uuid,或全部與 Patient entry 使用相同的 base 網址,讓包內的相對參照都解析到包內資源。 (entry.fullUrl.all(startsWith('urn:uuid:')) or entry.fullUrl.all(replaceMatches('[A-Za-z]+/[^/]+$', '') = %resource.entry.where(resource is Patient).fullUrl.first().replaceMatches('Patient/[^/]+$', '')))
    2. Bundle.identifier
    Definition

    填入個管流水序號,與本包 StrokeRegistryResponse 的 identifier 相同。個管流水序號搭配病歷號(StrokePatient 的 identifier)識別一個個管事件。

    Short個管事件識別碼。[應填入個管流水序號]
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control1..?
    4. Bundle.identifier.system
    Definition

    與 StrokeRegistryResponse 的個管流水序號使用同一個系統網址。範例使用 http://www.vghks.gov.tw/stroke-case-management-serial。

    Short識別碼系統。[個管流水序號的系統網址]
    Control1..?
    Must Supporttrue
    6. Bundle.identifier.value
    Short個管流水序號。[原樣填入,保留前置零]
    Control1..?
    Must Supporttrue
    8. Bundle.type
    ShortBundle 類型。[固定為 collection]
    Must Supporttrue
    Fixed Valuecollection
    10. Bundle.timestamp
    Definition

    組成本包的時間,精確到秒並帶時區,由組包系統依其時鐘填寫。

    Short組包時間。[YYYY-MM-DDThh:mm:ss+時區,例如 +08:00]
    Control1..?
    12. Bundle.entry
    Definition

    每個 entry 放一筆本個管事件的資源,只能放下列 Slice 的 Profile。資源之間的參照依各 entry 的 fullUrl 解析。

    Short資料包內容。[每個 entry 放一筆資源]
    Control2..?
    Must Supporttrue
    SlicingThis element introduces a set of slices on Bundle.entry. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
    • profile @ resource
    • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

      14. Bundle.entry.fullUrl
      Definition

      填 RESTful 網址時,結尾的「資源類型/id」須與 resource 的類型及 id 相同;填 urn:uuid 時,其他資源以同一個 urn:uuid 參照本資源。同一包的 fullUrl 全部使用 urn:uuid,或全部與 Patient entry 使用相同的 base 網址,讓包內的相對參照都解析到包內資源。

      Short資源完整網址。[base 網址加上「資源類型/id」,或 urn:uuid]
      Control1..?
      Must Supporttrue
      16. Bundle.entry.resource
      Short資源。[應填入下列 Slice 的 Profile]
      Control1..?
      Must Supporttrue
      18. Bundle.entry:patient
      Slice Namepatient
      Definition

      本個管事件的病人。包內其他資源的 subject 與 patient 都參照這一筆。

      Short病人。[應填入 StrokePatient,每包一筆]
      Control1..1
      Must Supporttrue
      20. Bundle.entry:patient.resource
      TypePatient(腦中風-病人基本資料)
      22. Bundle.entry:organization
      Slice Nameorganization
      Definition

      包內資源參照的院所,例如病歷號的核發院所。

      Short醫療院所。[應填入 StrokeOrganization]
      Control0..*
      Must Supporttrue
      24. Bundle.entry:organization.resource
      TypeOrganization(腦中風-醫療院所)
      26. Bundle.entry:encounter
      Slice Nameencounter
      Definition

      本個管事件的急診與住院就醫,各建一筆。

      Short就醫事件。[應填入 StrokeEncounter]
      Control0..*
      Must Supporttrue
      28. Bundle.entry:encounter.resource
      TypeEncounter(腦中風-就醫事件)
      30. Bundle.entry:registryResponse
      Slice NameregistryResponse
      Definition

      本個管事件的個管系統回覆,identifier 與 Bundle 的 identifier 相同。

      Short登錄表單回覆。[應填入 StrokeRegistryResponse]
      Control1..*
      Must Supporttrue
      32. Bundle.entry:registryResponse.resource
      TypeQuestionnaireResponse(腦中風-登錄表單回覆)
      34. Bundle.entry:provenance
      Slice Nameprovenance
      Definition

      本次匯入的追溯紀錄,target 參照本包的資源。

      Short資料來源追溯。[應填入 StrokeProvenance]
      Control0..*
      Must Supporttrue
      36. Bundle.entry:provenance.resource
      TypeProvenance(腦中風-資料來源追溯)
      38. Bundle.entry:condition
      Slice Namecondition
      Short中風診斷。[應填入 StrokeCondition]
      Control0..*
      Must Supporttrue
      40. Bundle.entry:condition.resource
      TypeCondition(腦中風-中風診斷)
      42. Bundle.entry:admissionContext
      Slice NameadmissionContext
      Short就醫背景。[應填入 StrokeAdmissionContext]
      Control0..*
      Must Supporttrue
      44. Bundle.entry:admissionContext.resource
      TypeObservation(腦中風-就醫背景)
      46. Bundle.entry:onsetTime
      Slice NameonsetTime
      Short發病時間。[應填入 StrokeOnsetTime]
      Control0..*
      Must Supporttrue
      48. Bundle.entry:onsetTime.resource
      TypeObservation(腦中風-發病時間)
      50. Bundle.entry:riskFactor
      Slice NameriskFactor
      Short危險因子與病史。[應填入 StrokeRiskFactor]
      Control0..*
      Must Supporttrue
      52. Bundle.entry:riskFactor.resource
      TypeObservation(腦中風-危險因子與病史)
      54. Bundle.entry:clinicalAssessment
      Slice NameclinicalAssessment
      Short中風分類評估。[應填入 StrokeClinicalAssessment]
      Control0..*
      Must Supporttrue
      56. Bundle.entry:clinicalAssessment.resource
      TypeObservation(腦中風-中風分類評估)
      58. Bundle.entry:careProcess
      Slice NamecareProcess
      Short照護流程紀錄。[應填入 StrokeCareProcess]
      Control0..*
      Must Supporttrue
      60. Bundle.entry:careProcess.resource
      TypeObservation(腦中風-照護流程紀錄)
      62. Bundle.entry:complication
      Slice Namecomplication
      Short住院併發症與惡化。[應填入 StrokeComplication]
      Control0..*
      Must Supporttrue
      64. Bundle.entry:complication.resource
      TypeObservation(腦中風-住院併發症與惡化)
      66. Bundle.entry:nihss
      Slice Namenihss
      ShortNIHSS 評估。[應填入 StrokeNIHSS]
      Control0..*
      Must Supporttrue
      68. Bundle.entry:nihss.resource
      TypeObservation(腦中風-NIHSS 評估)
      70. Bundle.entry:mrs
      Slice Namemrs
      ShortmRS 評估。[應填入 StrokeMRS]
      Control0..*
      Must Supporttrue
      72. Bundle.entry:mrs.resource
      TypeObservation(腦中風-mRS 評估)
      74. Bundle.entry:gcs
      Slice Namegcs
      Short昏迷指數。[應填入 StrokeGCS]
      Control0..*
      Must Supporttrue
      76. Bundle.entry:gcs.resource
      TypeObservation(腦中風-昏迷指數)
      78. Bundle.entry:bodyHeight
      Slice NamebodyHeight
      Short身高。[應填入 StrokeBodyHeight]
      Control0..*
      Must Supporttrue
      80. Bundle.entry:bodyHeight.resource
      TypeObservation(腦中風-身高)
      82. Bundle.entry:bodyWeight
      Slice NamebodyWeight
      Short體重。[應填入 StrokeBodyWeight]
      Control0..*
      Must Supporttrue
      84. Bundle.entry:bodyWeight.resource
      TypeObservation(腦中風-體重)
      86. Bundle.entry:bodyTemperature
      Slice NamebodyTemperature
      Short體溫。[應填入 StrokeBodyTemperature]
      Control0..*
      Must Supporttrue
      88. Bundle.entry:bodyTemperature.resource
      TypeObservation(腦中風-體溫)
      90. Bundle.entry:heartRate
      Slice NameheartRate
      Short心率。[應填入 StrokeHeartRate]
      Control0..*
      Must Supporttrue
      92. Bundle.entry:heartRate.resource
      TypeObservation(腦中風-心率)
      94. Bundle.entry:respiratoryRate
      Slice NamerespiratoryRate
      Short呼吸速率。[應填入 StrokeRespiratoryRate]
      Control0..*
      Must Supporttrue
      96. Bundle.entry:respiratoryRate.resource
      TypeObservation(腦中風-呼吸速率)
      98. Bundle.entry:bloodPressure
      Slice NamebloodPressure
      Short血壓。[應填入 StrokeBloodPressure]
      Control0..*
      Must Supporttrue
      100. Bundle.entry:bloodPressure.resource
      TypeObservation(腦中風-血壓)
      102. Bundle.entry:occupation
      Slice Nameoccupation
      Short職業。[應填入 StrokeOccupation]
      Control0..*
      Must Supporttrue
      104. Bundle.entry:occupation.resource
      TypeObservation(腦中風-職業)
      106. Bundle.entry:smokingStatus
      Slice NamesmokingStatus
      Short吸菸狀態。[應填入 StrokeSmokingStatus]
      Control0..*
      Must Supporttrue
      108. Bundle.entry:smokingStatus.resource
      TypeObservation(腦中風-吸菸狀態)
      110. Bundle.entry:laboratory
      Slice Namelaboratory
      Short檢驗結果。[應填入 StrokeLaboratory]
      Control0..*
      Must Supporttrue
      112. Bundle.entry:laboratory.resource
      TypeObservation(腦中風-檢驗結果)
      114. Bundle.entry:procedureResult
      Slice NameprocedureResult
      Short處置時點結果。[應填入 StrokeProcedureResult]
      Control0..*
      Must Supporttrue
      116. Bundle.entry:procedureResult.resource
      TypeObservation(腦中風-處置時點結果)
      118. Bundle.entry:medicationStatement
      Slice NamemedicationStatement
      Short用藥紀錄。[應填入 StrokeMedicationStatement]
      Control0..*
      Must Supporttrue
      120. Bundle.entry:medicationStatement.resource
      TypeMedicationStatement(腦中風-用藥紀錄)
      122. Bundle.entry:medicationAdministration
      Slice NamemedicationAdministration
      Short給藥紀錄。[應填入 StrokeMedicationAdministration]
      Control0..*
      Must Supporttrue
      124. Bundle.entry:medicationAdministration.resource
      TypeMedicationAdministration(腦中風-給藥紀錄)
      126. Bundle.entry:procedure
      Slice Nameprocedure
      Short醫療處置。[應填入 StrokeProcedure]
      Control0..*
      Must Supporttrue
      128. Bundle.entry:procedure.resource
      TypeProcedure(腦中風-醫療處置)
      130. Bundle.entry:imagingStudy
      Slice NameimagingStudy
      Short影像檢查。[應填入 StrokeImagingStudy]
      Control0..*
      Must Supporttrue
      132. Bundle.entry:imagingStudy.resource
      TypeImagingStudy(腦中風-影像檢查)

      See the documentation on how to interpret the contents of this table

      0. Bundle
      Definition

      用於存於一組Resources的結構或物件

      Short包含resourceBundle
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsbdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
      bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
      bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited (entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history')))
      bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited (entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history')))
      bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) ((type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct())
      bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
      bdl-10: A document must have a date (type = 'document' implies (timestamp.hasValue()))
      bdl-11: A document must have a Composition as the first resource (type = 'document' implies entry.first().resource.is(Composition))
      bdl-12: A message must have a MessageHeader as the first resource (type = 'message' implies entry.first().resource.is(MessageHeader))
      stroke-cm-bundle-1: Bundle 內所有資源的 subject 與 patient 都參照本 Bundle 的 Patient entry:參照值等於該 entry 的 fullUrl,或是 fullUrl 結尾的「資源類型/id」。 ((entry.resource.ofType(Observation).subject | entry.resource.ofType(Condition).subject | entry.resource.ofType(Encounter).subject | entry.resource.ofType(QuestionnaireResponse).subject | entry.resource.ofType(MedicationStatement).subject | entry.resource.ofType(MedicationAdministration).subject | entry.resource.ofType(Procedure).subject | entry.resource.ofType(ImagingStudy).subject | entry.resource.ofType(Consent).patient).all(reference = %resource.entry.where(resource is Patient).fullUrl.first() or (reference.startsWith('Patient/') and %resource.entry.where(resource is Patient).fullUrl.first().endsWith('/' + reference))))
      stroke-cm-bundle-2: 同一包的 fullUrl 全部使用 urn:uuid,或全部與 Patient entry 使用相同的 base 網址,讓包內的相對參照都解析到包內資源。 (entry.fullUrl.all(startsWith('urn:uuid:')) or entry.fullUrl.all(replaceMatches('[A-Za-z]+/[^/]+$', '') = %resource.entry.where(resource is Patient).fullUrl.first().replaceMatches('Patient/[^/]+$', '')))
      2. Bundle.id
      Definition

      resource的邏輯ID,在resource的URL中使用。一旦指定,這個值永遠不會改變。

      Short不重複的ID用以識別儲存在特定FHIR Server中的Bundle紀錄,通常又稱為邏輯性ID。
      Comments

      一個resource使用新增操作(create operation)提交給伺服器時,此resource沒有id,它的id在resource被創建後由伺器分配/指定。

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. Bundle.meta
      Definition

      關於resource的metadata。這是由基礎建設維護的內容。內容的更改可能並不總是與resource的版本更改相關聯。

      Short此Bundle Resource的metadata
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Bundle.implicitRules
      Definition

      構建resource時遵循的一系列規則的參照,在處理內容時必須理解這些規則。通常這是對IG所定義之特殊規則及其他profiles的參照。

      Short創建此內容所依據的一組規則
      Comments

      宣告這套規則限制了內容只能被有限的交易夥伴所理解。這從本質上限制了資料的長期有用性。然而,現有的健康生態體系高度分裂,還沒有準備好以普遍可計算的方式定義、收集和交換資料。只要有可能,實作者和/或規範編寫者應該避免使用這個資料項目。通常在使用時,此URL是對IG的參照,此IG將這些特殊規則與其他profiles、value sets等一起定義為其敘述的一部分。

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Bundle.language
      Definition

      編寫此resource的語言

      Short用以表述Bundle Resource內容的語言。
      Comments

      提供語言是為了支援索引和可存取性(通常,文字表述轉語音等服務使用此語言標籤)。html lanuage tag適用於此敘述。resource上的語言標籤可用於指定從resource中的資料所產成的其他表述之語言。不是所有的內容都必須使用此語言。不應該假定Resource.language自動適用於敘述。如果指定語言,它也應該被指定在html中的div資料項目(關於xml:lang和html lang屬性之間的關係,見HTML5中的規則)。

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      人類語言;鼓勵使用CommonLanguages代碼表中的代碼,但不強制一定要使用此代碼表,你也可使用其他代碼表的代碼或單純以文字表示。

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      ExampleValue: zh-TW
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Bundle.identifier
      Definition

      填入個管流水序號,與本包 StrokeRegistryResponse 的 identifier 相同。個管流水序號搭配病歷號(StrokePatient 的 identifier)識別一個個管事件。

      Short個管事件識別碼。[應填入個管流水序號]
      Comments

      永久的識別通常只對Document、Message和Collection的批次處理是重要。它通常不會被填入到searh和history的結果中,伺服器在處理batches和transactions時會忽略Bundle.identifier。但對於Documents的identifier 必須(SHALL) 被填入,其為全球唯一的識別碼。

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control1..1
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Bundle.identifier.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      14. Bundle.identifier.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Bundle.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. Bundle.identifier.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUse
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. Bundle.identifier.type
        Definition

        A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

        ShortDescription of identifier
        Comments

        This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
        (extensible to http://hl7.org/fhir/ValueSet/identifier-type|4.0.1)

        A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows users to make use of identifiers when the identifier system is not known.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. Bundle.identifier.system
        Definition

        與 StrokeRegistryResponse 的個管流水序號使用同一個系統網址。範例使用 http://www.vghks.gov.tw/stroke-case-management-serial。

        Short識別碼系統。[個管流水序號的系統網址]
        Comments

        Identifier.system is always case sensitive.

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        ExampleGeneral: http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Bundle.identifier.value
        Definition

        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        Short個管流水序號。[原樣填入,保留前置零]
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        ExampleGeneral: 123456
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. Bundle.identifier.period
        Definition

        Time period during which identifier is/was valid for use.

        ShortTime period when id is/was valid for use
        Control0..1
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. Bundle.identifier.assigner
        Definition

        Organization that issued/manages the identifier.

        ShortOrganization that issued id (may be just text)
        Comments

        The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

        Control0..1
        TypeReference(Organization)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Bundle.type
        Definition

        表明這個Bundle的目的-期望如何使用。

        ShortBundle 類型。[固定為 collection]
        Comments

        Bundle也可以用於其他目的(例如,document可以作為transaction被接受)。這主要是為了給某些Bundle類型制定特定的規則。

        Control1..1
        BindingThe codes SHALL be taken from BundleType
        (required to http://hl7.org/fhir/ValueSet/bundle-type|4.0.1)

        Bundle類型;應填入所綁定值集中的其中一個代碼。

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Fixed Valuecollection
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Bundle.timestamp
        Definition

        組成本包的時間,精確到秒並帶時區,由組包系統依其時鐘填寫。

        Short組包時間。[YYYY-MM-DDThh:mm:ss+時區,例如 +08:00]
        Comments

        對很多Bundle而言,時間戳記同等於.meta.lastUpdated,因為它們不會被儲存(例如:查詢結果)。當一個Bundl被放置在一個持久化存儲中(a persistent store)時,.meta.lastUpdated通常會被伺服器改變。當Bundle是一個Message時,中介軟體(即使沒有存儲)**建議應該(SHOULD)更新.meta.lastUpdated。.timestamp用於追踪Bundle的原始時間,並且建議應該(SHOULD)**被填入。

        使用方法:

        • document : 文件的創建日期。注意:composition的創建可能早於Bundle的創鍵,或者composition會與多個文件相關聯。composition的編輯日期可能早於Bundle的組成時間。
        • mssage:訊息內容被組成的日期。這個日期不會被中介軟體引擎改變,除非他們增加了額外的資料,改變了訊息的時間含義。
        • history : 歷史紀錄被組成的日期。這個時間將被用於查詢_since(自此)時間後的後續更新紀錄。
        • searchset : 查詢結果集:是指查詢結果組合起來的時間。要注意的是,不同的頁面**可能(MAY)**會有不同的時間標記,但不是必須的。即使時間標記不同,也不代表隨後的頁面會顯示或包含從最初查詢後所做的變更。

        transaction | transaction-response | batch | batch-response | collection : 沒有特別指定的含義。 時間戳記的值應該比Bundle中的resources的 lastUpdated 和其他時間戳記還要新,而且應該等於或早於Bundle本身的 .meta.lastUpdated 相同或更早。

        Control1..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Bundle.total
        Definition

        如果有一組查詢結果相符,這個數字代表所有頁面中 type「match」條目的總數。這個總數不包括search.mode=「include」 或 「outcome」的查詢結果,也不表示Bundle內全部條目的數量。

        Short查詢時符合條件的總筆數
        Comments

        只在Bundle是查詢結果集時使用。這個總數不包括像是OperationOutcome和Bundle中包含的resources等,只計算匹配的resources的總數。

        Control0..1
        This element is affected by the following invariants: bdl-1
        TypeunsignedInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Bundle.link
        Definition

        一系列連結,為這個Bundle提供上下文。

        Short與此Bundle相關的連結
        Comments

        Bundle.link和Bundle.entry.link的設計是為了在使用Bundle時(例如實現HATEOAS時)提供更多的上下文資訊。

        如果entry中的resource是直接被讀取的,那麼Bundle.entry.link就對應於HTTP header中的連結。

        雖然這個規範對於查詢和分頁有一些Bundle.link的特定使用方式,但對於Bundle.entry.link沒有特定的使用方式,也沒有在transaction過程中定義其功能 - 它的具體意義取決於實際的應用方式。

        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. Bundle.link.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        38. Bundle.link.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        40. Bundle.link.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        42. Bundle.link.relation
        Definition

        詳細說明該連結功能用途的名稱 - 參見http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1

        Short參見 [http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1](http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Bundle.link.url
        Definition

        連結的參照細節

        Short連結的參照細節
        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Bundle.entry
        Definition

        每個 entry 放一筆本個管事件的資源,只能放下列 Slice 的 Profile。資源之間的參照依各 entry 的 fullUrl 解析。

        Short資料包內容。[每個 entry 放一筆資源]
        Control2..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Bundle.entry. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
        • profile @ resource
        • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

          48. Bundle.entry.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          50. Bundle.entry.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          52. Bundle.entry.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          54. Bundle.entry.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. Bundle.entry.fullUrl
          Definition

          填 RESTful 網址時,結尾的「資源類型/id」須與 resource 的類型及 id 相同;填 urn:uuid 時,其他資源以同一個 urn:uuid 參照本資源。同一包的 fullUrl 全部使用 urn:uuid,或全部與 Patient entry 使用相同的 base 網址,讓包內的相對參照都解析到包內資源。

          Short資源完整網址。[base 網址加上「資源類型/id」,或 urn:uuid]
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. Bundle.entry.resource
          Definition

          Bundle中的resource。resource的目的/含義由 Bundle.type 決定。

          Short資源。[應填入下列 Slice 的 Profile]
          Control1..1
          TypeResource
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          60. Bundle.entry.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. Bundle.entry.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          64. Bundle.entry.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          66. Bundle.entry.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          68. Bundle.entry.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          70. Bundle.entry.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. Bundle.entry.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          74. Bundle.entry.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          76. Bundle.entry.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          78. Bundle.entry.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          80. Bundle.entry.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          82. Bundle.entry.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          84. Bundle.entry.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          86. Bundle.entry.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          88. Bundle.entry.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          90. Bundle.entry.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          92. Bundle.entry.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          94. Bundle.entry.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          96. Bundle.entry.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          98. Bundle.entry.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          100. Bundle.entry.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          102. Bundle.entry.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          104. Bundle.entry.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          106. Bundle.entry.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          108. Bundle.entry.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          110. Bundle.entry:patient
          Slice Namepatient
          Definition

          本個管事件的病人。包內其他資源的 subject 與 patient 都參照這一筆。

          Short病人。[應填入 StrokePatient,每包一筆]
          Control1..1
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          112. Bundle.entry:patient.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          114. Bundle.entry:patient.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          116. Bundle.entry:patient.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          118. Bundle.entry:patient.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          120. Bundle.entry:patient.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          122. Bundle.entry:patient.resource
          Definition

          關於接受照護或其他健康相關服務的個人或動物的人口統計學和其他行政資訊。

          Short接受健康照護服務的個人或動物之資訊
          Control0..1
          TypePatient(腦中風-病人基本資料 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesSubjectOfCare Client Resident
          124. Bundle.entry:patient.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          126. Bundle.entry:patient.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          128. Bundle.entry:patient.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          130. Bundle.entry:patient.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          132. Bundle.entry:patient.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          134. Bundle.entry:patient.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          136. Bundle.entry:patient.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          138. Bundle.entry:patient.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          140. Bundle.entry:patient.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          142. Bundle.entry:patient.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          144. Bundle.entry:patient.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          146. Bundle.entry:patient.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          148. Bundle.entry:patient.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          150. Bundle.entry:patient.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          152. Bundle.entry:patient.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          154. Bundle.entry:patient.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          156. Bundle.entry:patient.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          158. Bundle.entry:patient.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          160. Bundle.entry:patient.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          162. Bundle.entry:patient.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          164. Bundle.entry:patient.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          166. Bundle.entry:patient.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          168. Bundle.entry:patient.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          170. Bundle.entry:patient.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          172. Bundle.entry:patient.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          174. Bundle.entry:organization
          Slice Nameorganization
          Definition

          包內資源參照的院所,例如病歷號的核發院所。

          Short醫療院所。[應填入 StrokeOrganization]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          176. Bundle.entry:organization.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          178. Bundle.entry:organization.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          180. Bundle.entry:organization.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          182. Bundle.entry:organization.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          184. Bundle.entry:organization.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          186. Bundle.entry:organization.resource
          Definition

          為實現某種形式的集體行動而形成的正式或非正式認可的一群人或機構的團體。包括公司、機構、企業、部門、社群團體、健康照護實務團體、付款人/保險公司等。

          Short具有共同目的的一群人或機構
          Control0..1
          TypeOrganization(腦中風-醫療院所 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          188. Bundle.entry:organization.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          190. Bundle.entry:organization.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          192. Bundle.entry:organization.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          194. Bundle.entry:organization.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          196. Bundle.entry:organization.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          198. Bundle.entry:organization.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          200. Bundle.entry:organization.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          202. Bundle.entry:organization.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          204. Bundle.entry:organization.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          206. Bundle.entry:organization.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          208. Bundle.entry:organization.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          210. Bundle.entry:organization.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          212. Bundle.entry:organization.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          214. Bundle.entry:organization.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          216. Bundle.entry:organization.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          218. Bundle.entry:organization.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          220. Bundle.entry:organization.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          222. Bundle.entry:organization.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          224. Bundle.entry:organization.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          226. Bundle.entry:organization.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          228. Bundle.entry:organization.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          230. Bundle.entry:organization.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          232. Bundle.entry:organization.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          234. Bundle.entry:organization.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          236. Bundle.entry:organization.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          238. Bundle.entry:encounter
          Slice Nameencounter
          Definition

          本個管事件的急診與住院就醫,各建一筆。

          Short就醫事件。[應填入 StrokeEncounter]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          240. Bundle.entry:encounter.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          242. Bundle.entry:encounter.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          244. Bundle.entry:encounter.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          246. Bundle.entry:encounter.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          248. Bundle.entry:encounter.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          250. Bundle.entry:encounter.resource
          Definition

          病人和健康照護服務提供者之間的互動,目的是提供健康照護服務或評估病人的健康狀況。

          Short提供病人服務的一種互動
          Control0..1
          TypeEncounter(腦中風-就醫事件 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVisit
          252. Bundle.entry:encounter.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          254. Bundle.entry:encounter.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          256. Bundle.entry:encounter.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          258. Bundle.entry:encounter.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          260. Bundle.entry:encounter.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          262. Bundle.entry:encounter.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          264. Bundle.entry:encounter.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          266. Bundle.entry:encounter.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          268. Bundle.entry:encounter.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          270. Bundle.entry:encounter.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          272. Bundle.entry:encounter.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          274. Bundle.entry:encounter.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          276. Bundle.entry:encounter.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          278. Bundle.entry:encounter.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          280. Bundle.entry:encounter.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          282. Bundle.entry:encounter.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          284. Bundle.entry:encounter.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          286. Bundle.entry:encounter.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          288. Bundle.entry:encounter.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          290. Bundle.entry:encounter.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          292. Bundle.entry:encounter.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          294. Bundle.entry:encounter.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          296. Bundle.entry:encounter.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          298. Bundle.entry:encounter.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          300. Bundle.entry:encounter.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          302. Bundle.entry:registryResponse
          Slice NameregistryResponse
          Definition

          本個管事件的個管系統回覆,identifier 與 Bundle 的 identifier 相同。

          Short登錄表單回覆。[應填入 StrokeRegistryResponse]
          Control1..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          304. Bundle.entry:registryResponse.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          306. Bundle.entry:registryResponse.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          308. Bundle.entry:registryResponse.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          310. Bundle.entry:registryResponse.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          312. Bundle.entry:registryResponse.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          314. Bundle.entry:registryResponse.resource
          Definition

          Sets expectations for supported capabilities for questionnaire responses for SDC-conformant systems.

          ShortSDC Questionnaire Response
          Comments

          The QuestionnaireResponse contains enough information about the questions asked and their organization that it can be interpreted somewhat independently from the Questionnaire it is based on. I.e. You don't need access to the Questionnaire in order to extract basic information from a QuestionnaireResponse.

          Control0..1
          TypeQuestionnaireResponse(腦中風-登錄表單回覆 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate NamesForm, QuestionnaireAnswers, Form Data
          316. Bundle.entry:registryResponse.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          318. Bundle.entry:registryResponse.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          320. Bundle.entry:registryResponse.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          322. Bundle.entry:registryResponse.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          324. Bundle.entry:registryResponse.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          326. Bundle.entry:registryResponse.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          328. Bundle.entry:registryResponse.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          330. Bundle.entry:registryResponse.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          332. Bundle.entry:registryResponse.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          334. Bundle.entry:registryResponse.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          336. Bundle.entry:registryResponse.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          338. Bundle.entry:registryResponse.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          340. Bundle.entry:registryResponse.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          342. Bundle.entry:registryResponse.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          344. Bundle.entry:registryResponse.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          346. Bundle.entry:registryResponse.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          348. Bundle.entry:registryResponse.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          350. Bundle.entry:registryResponse.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          352. Bundle.entry:registryResponse.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          354. Bundle.entry:registryResponse.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          356. Bundle.entry:registryResponse.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          358. Bundle.entry:registryResponse.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          360. Bundle.entry:registryResponse.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          362. Bundle.entry:registryResponse.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          364. Bundle.entry:registryResponse.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          366. Bundle.entry:provenance
          Slice Nameprovenance
          Definition

          本次匯入的追溯紀錄,target 參照本包的資源。

          Short資料來源追溯。[應填入 StrokeProvenance]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          368. Bundle.entry:provenance.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          370. Bundle.entry:provenance.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          372. Bundle.entry:provenance.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          374. Bundle.entry:provenance.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          376. Bundle.entry:provenance.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          378. Bundle.entry:provenance.resource
          Definition

          Provenance of a resource is a record that describes entities and processes involved in producing and delivering or otherwise influencing that resource. Provenance provides a critical foundation for assessing authenticity, enabling trust, and allowing reproducibility. Provenance assertions are a form of contextual metadata and can themselves become important records with their own provenance. Provenance statement indicates clinical significance in terms of confidence in authenticity, reliability, and trustworthiness, integrity, and stage in lifecycle (e.g. Document Completion - has the artifact been legally authenticated), all of which may impact security, privacy, and trust policies.

          ShortWho, What, When for a set of resources
          Comments

          Some parties may be duplicated between the target resource and its provenance. For instance, the prescriber is usually (but not always) the author of the prescription resource. This resource is defined with close consideration for W3C Provenance.

          Control0..1
          TypeProvenance(腦中風-資料來源追溯 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesHistory, Event, Activity
          380. Bundle.entry:provenance.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          382. Bundle.entry:provenance.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          384. Bundle.entry:provenance.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          386. Bundle.entry:provenance.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          388. Bundle.entry:provenance.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          390. Bundle.entry:provenance.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          392. Bundle.entry:provenance.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          394. Bundle.entry:provenance.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          396. Bundle.entry:provenance.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          398. Bundle.entry:provenance.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          400. Bundle.entry:provenance.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          402. Bundle.entry:provenance.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          404. Bundle.entry:provenance.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          406. Bundle.entry:provenance.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          408. Bundle.entry:provenance.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          410. Bundle.entry:provenance.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          412. Bundle.entry:provenance.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          414. Bundle.entry:provenance.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          416. Bundle.entry:provenance.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          418. Bundle.entry:provenance.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          420. Bundle.entry:provenance.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          422. Bundle.entry:provenance.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          424. Bundle.entry:provenance.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          426. Bundle.entry:provenance.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          428. Bundle.entry:provenance.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          430. Bundle.entry:condition
          Slice Namecondition
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short中風診斷。[應填入 StrokeCondition]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          432. Bundle.entry:condition.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          434. Bundle.entry:condition.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          436. Bundle.entry:condition.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          438. Bundle.entry:condition.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          440. Bundle.entry:condition.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          442. Bundle.entry:condition.resource
          Definition

          一個臨床病情、問題、診斷或其他事件、情況、或臨床概念,已上升到需要關注的程度。

          Short有關病情、問題或診斷的詳細資訊
          Control0..1
          TypeCondition(腦中風-中風診斷 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          444. Bundle.entry:condition.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          446. Bundle.entry:condition.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          448. Bundle.entry:condition.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          450. Bundle.entry:condition.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          452. Bundle.entry:condition.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          454. Bundle.entry:condition.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          456. Bundle.entry:condition.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          458. Bundle.entry:condition.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          460. Bundle.entry:condition.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          462. Bundle.entry:condition.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          464. Bundle.entry:condition.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          466. Bundle.entry:condition.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          468. Bundle.entry:condition.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          470. Bundle.entry:condition.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          472. Bundle.entry:condition.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          474. Bundle.entry:condition.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          476. Bundle.entry:condition.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          478. Bundle.entry:condition.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          480. Bundle.entry:condition.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          482. Bundle.entry:condition.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          484. Bundle.entry:condition.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          486. Bundle.entry:condition.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          488. Bundle.entry:condition.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          490. Bundle.entry:condition.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          492. Bundle.entry:condition.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          494. Bundle.entry:admissionContext
          Slice NameadmissionContext
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short就醫背景。[應填入 StrokeAdmissionContext]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          496. Bundle.entry:admissionContext.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          498. Bundle.entry:admissionContext.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          500. Bundle.entry:admissionContext.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          502. Bundle.entry:admissionContext.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          504. Bundle.entry:admissionContext.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          506. Bundle.entry:admissionContext.resource
          Definition

          描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。

          Short健康狀態篩檢與評估
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-就醫背景 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          508. Bundle.entry:admissionContext.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          510. Bundle.entry:admissionContext.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          512. Bundle.entry:admissionContext.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          514. Bundle.entry:admissionContext.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          516. Bundle.entry:admissionContext.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          518. Bundle.entry:admissionContext.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          520. Bundle.entry:admissionContext.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          522. Bundle.entry:admissionContext.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          524. Bundle.entry:admissionContext.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          526. Bundle.entry:admissionContext.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          528. Bundle.entry:admissionContext.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          530. Bundle.entry:admissionContext.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          532. Bundle.entry:admissionContext.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          534. Bundle.entry:admissionContext.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          536. Bundle.entry:admissionContext.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          538. Bundle.entry:admissionContext.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          540. Bundle.entry:admissionContext.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          542. Bundle.entry:admissionContext.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          544. Bundle.entry:admissionContext.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          546. Bundle.entry:admissionContext.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          548. Bundle.entry:admissionContext.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          550. Bundle.entry:admissionContext.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          552. Bundle.entry:admissionContext.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          554. Bundle.entry:admissionContext.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          556. Bundle.entry:admissionContext.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          558. Bundle.entry:onsetTime
          Slice NameonsetTime
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short發病時間。[應填入 StrokeOnsetTime]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          560. Bundle.entry:onsetTime.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          562. Bundle.entry:onsetTime.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          564. Bundle.entry:onsetTime.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          566. Bundle.entry:onsetTime.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          568. Bundle.entry:onsetTime.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          570. Bundle.entry:onsetTime.resource
          Definition

          描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。

          Short健康狀態篩檢與評估
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-發病時間 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          572. Bundle.entry:onsetTime.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          574. Bundle.entry:onsetTime.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          576. Bundle.entry:onsetTime.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          578. Bundle.entry:onsetTime.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          580. Bundle.entry:onsetTime.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          582. Bundle.entry:onsetTime.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          584. Bundle.entry:onsetTime.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          586. Bundle.entry:onsetTime.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          588. Bundle.entry:onsetTime.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          590. Bundle.entry:onsetTime.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          592. Bundle.entry:onsetTime.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          594. Bundle.entry:onsetTime.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          596. Bundle.entry:onsetTime.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          598. Bundle.entry:onsetTime.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          600. Bundle.entry:onsetTime.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          602. Bundle.entry:onsetTime.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          604. Bundle.entry:onsetTime.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          606. Bundle.entry:onsetTime.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          608. Bundle.entry:onsetTime.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          610. Bundle.entry:onsetTime.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          612. Bundle.entry:onsetTime.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          614. Bundle.entry:onsetTime.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          616. Bundle.entry:onsetTime.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          618. Bundle.entry:onsetTime.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          620. Bundle.entry:onsetTime.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          622. Bundle.entry:riskFactor
          Slice NameriskFactor
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short危險因子與病史。[應填入 StrokeRiskFactor]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          624. Bundle.entry:riskFactor.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          626. Bundle.entry:riskFactor.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          628. Bundle.entry:riskFactor.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          630. Bundle.entry:riskFactor.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          632. Bundle.entry:riskFactor.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          634. Bundle.entry:riskFactor.resource
          Definition

          描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。

          Short健康狀態篩檢與評估
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-危險因子與病史 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          636. Bundle.entry:riskFactor.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          638. Bundle.entry:riskFactor.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          640. Bundle.entry:riskFactor.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          642. Bundle.entry:riskFactor.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          644. Bundle.entry:riskFactor.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          646. Bundle.entry:riskFactor.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          648. Bundle.entry:riskFactor.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          650. Bundle.entry:riskFactor.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          652. Bundle.entry:riskFactor.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          654. Bundle.entry:riskFactor.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          656. Bundle.entry:riskFactor.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          658. Bundle.entry:riskFactor.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          660. Bundle.entry:riskFactor.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          662. Bundle.entry:riskFactor.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          664. Bundle.entry:riskFactor.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          666. Bundle.entry:riskFactor.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          668. Bundle.entry:riskFactor.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          670. Bundle.entry:riskFactor.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          672. Bundle.entry:riskFactor.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          674. Bundle.entry:riskFactor.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          676. Bundle.entry:riskFactor.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          678. Bundle.entry:riskFactor.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          680. Bundle.entry:riskFactor.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          682. Bundle.entry:riskFactor.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          684. Bundle.entry:riskFactor.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          686. Bundle.entry:clinicalAssessment
          Slice NameclinicalAssessment
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short中風分類評估。[應填入 StrokeClinicalAssessment]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          688. Bundle.entry:clinicalAssessment.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          690. Bundle.entry:clinicalAssessment.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          692. Bundle.entry:clinicalAssessment.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          694. Bundle.entry:clinicalAssessment.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          696. Bundle.entry:clinicalAssessment.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          698. Bundle.entry:clinicalAssessment.resource
          Definition

          描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。

          Short健康狀態篩檢與評估
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-中風分類評估 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          700. Bundle.entry:clinicalAssessment.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          702. Bundle.entry:clinicalAssessment.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          704. Bundle.entry:clinicalAssessment.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          706. Bundle.entry:clinicalAssessment.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          708. Bundle.entry:clinicalAssessment.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          710. Bundle.entry:clinicalAssessment.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          712. Bundle.entry:clinicalAssessment.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          714. Bundle.entry:clinicalAssessment.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          716. Bundle.entry:clinicalAssessment.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          718. Bundle.entry:clinicalAssessment.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          720. Bundle.entry:clinicalAssessment.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          722. Bundle.entry:clinicalAssessment.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          724. Bundle.entry:clinicalAssessment.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          726. Bundle.entry:clinicalAssessment.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          728. Bundle.entry:clinicalAssessment.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          730. Bundle.entry:clinicalAssessment.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          732. Bundle.entry:clinicalAssessment.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          734. Bundle.entry:clinicalAssessment.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          736. Bundle.entry:clinicalAssessment.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          738. Bundle.entry:clinicalAssessment.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          740. Bundle.entry:clinicalAssessment.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          742. Bundle.entry:clinicalAssessment.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          744. Bundle.entry:clinicalAssessment.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          746. Bundle.entry:clinicalAssessment.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          748. Bundle.entry:clinicalAssessment.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          750. Bundle.entry:careProcess
          Slice NamecareProcess
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short照護流程紀錄。[應填入 StrokeCareProcess]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          752. Bundle.entry:careProcess.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          754. Bundle.entry:careProcess.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          756. Bundle.entry:careProcess.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          758. Bundle.entry:careProcess.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          760. Bundle.entry:careProcess.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          762. Bundle.entry:careProcess.resource
          Definition

          描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。

          Short健康狀態篩檢與評估
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-照護流程紀錄 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          764. Bundle.entry:careProcess.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          766. Bundle.entry:careProcess.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          768. Bundle.entry:careProcess.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          770. Bundle.entry:careProcess.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          772. Bundle.entry:careProcess.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          774. Bundle.entry:careProcess.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          776. Bundle.entry:careProcess.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          778. Bundle.entry:careProcess.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          780. Bundle.entry:careProcess.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          782. Bundle.entry:careProcess.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          784. Bundle.entry:careProcess.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          786. Bundle.entry:careProcess.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          788. Bundle.entry:careProcess.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          790. Bundle.entry:careProcess.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          792. Bundle.entry:careProcess.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          794. Bundle.entry:careProcess.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          796. Bundle.entry:careProcess.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          798. Bundle.entry:careProcess.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          800. Bundle.entry:careProcess.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          802. Bundle.entry:careProcess.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          804. Bundle.entry:careProcess.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          806. Bundle.entry:careProcess.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          808. Bundle.entry:careProcess.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          810. Bundle.entry:careProcess.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          812. Bundle.entry:careProcess.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          814. Bundle.entry:complication
          Slice Namecomplication
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short住院併發症與惡化。[應填入 StrokeComplication]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          816. Bundle.entry:complication.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          818. Bundle.entry:complication.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          820. Bundle.entry:complication.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          822. Bundle.entry:complication.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          824. Bundle.entry:complication.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          826. Bundle.entry:complication.resource
          Definition

          描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。

          Short健康狀態篩檢與評估
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-住院併發症與惡化 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          828. Bundle.entry:complication.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          830. Bundle.entry:complication.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          832. Bundle.entry:complication.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          834. Bundle.entry:complication.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          836. Bundle.entry:complication.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          838. Bundle.entry:complication.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          840. Bundle.entry:complication.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          842. Bundle.entry:complication.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          844. Bundle.entry:complication.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          846. Bundle.entry:complication.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          848. Bundle.entry:complication.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          850. Bundle.entry:complication.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          852. Bundle.entry:complication.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          854. Bundle.entry:complication.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          856. Bundle.entry:complication.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          858. Bundle.entry:complication.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          860. Bundle.entry:complication.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          862. Bundle.entry:complication.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          864. Bundle.entry:complication.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          866. Bundle.entry:complication.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          868. Bundle.entry:complication.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          870. Bundle.entry:complication.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          872. Bundle.entry:complication.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          874. Bundle.entry:complication.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          876. Bundle.entry:complication.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          878. Bundle.entry:nihss
          Slice Namenihss
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          ShortNIHSS 評估。[應填入 StrokeNIHSS]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          880. Bundle.entry:nihss.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          882. Bundle.entry:nihss.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          884. Bundle.entry:nihss.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          886. Bundle.entry:nihss.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          888. Bundle.entry:nihss.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          890. Bundle.entry:nihss.resource
          Definition

          描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。

          Short健康狀態篩檢與評估
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-NIHSS 評估 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          892. Bundle.entry:nihss.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          894. Bundle.entry:nihss.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          896. Bundle.entry:nihss.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          898. Bundle.entry:nihss.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          900. Bundle.entry:nihss.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          902. Bundle.entry:nihss.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          904. Bundle.entry:nihss.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          906. Bundle.entry:nihss.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          908. Bundle.entry:nihss.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          910. Bundle.entry:nihss.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          912. Bundle.entry:nihss.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          914. Bundle.entry:nihss.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          916. Bundle.entry:nihss.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          918. Bundle.entry:nihss.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          920. Bundle.entry:nihss.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          922. Bundle.entry:nihss.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          924. Bundle.entry:nihss.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          926. Bundle.entry:nihss.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          928. Bundle.entry:nihss.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          930. Bundle.entry:nihss.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          932. Bundle.entry:nihss.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          934. Bundle.entry:nihss.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          936. Bundle.entry:nihss.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          938. Bundle.entry:nihss.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          940. Bundle.entry:nihss.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          942. Bundle.entry:mrs
          Slice Namemrs
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          ShortmRS 評估。[應填入 StrokeMRS]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          944. Bundle.entry:mrs.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          946. Bundle.entry:mrs.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          948. Bundle.entry:mrs.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          950. Bundle.entry:mrs.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          952. Bundle.entry:mrs.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          954. Bundle.entry:mrs.resource
          Definition

          描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。

          Short健康狀態篩檢與評估
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-mRS 評估 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          956. Bundle.entry:mrs.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          958. Bundle.entry:mrs.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          960. Bundle.entry:mrs.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          962. Bundle.entry:mrs.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          964. Bundle.entry:mrs.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          966. Bundle.entry:mrs.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          968. Bundle.entry:mrs.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          970. Bundle.entry:mrs.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          972. Bundle.entry:mrs.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          974. Bundle.entry:mrs.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          976. Bundle.entry:mrs.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          978. Bundle.entry:mrs.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          980. Bundle.entry:mrs.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          982. Bundle.entry:mrs.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          984. Bundle.entry:mrs.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          986. Bundle.entry:mrs.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          988. Bundle.entry:mrs.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          990. Bundle.entry:mrs.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          992. Bundle.entry:mrs.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          994. Bundle.entry:mrs.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          996. Bundle.entry:mrs.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          998. Bundle.entry:mrs.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1000. Bundle.entry:mrs.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1002. Bundle.entry:mrs.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1004. Bundle.entry:mrs.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1006. Bundle.entry:gcs
          Slice Namegcs
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short昏迷指數。[應填入 StrokeGCS]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1008. Bundle.entry:gcs.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1010. Bundle.entry:gcs.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1012. Bundle.entry:gcs.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1014. Bundle.entry:gcs.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1016. Bundle.entry:gcs.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1018. Bundle.entry:gcs.resource
          Definition

          描述此 Observation Resource 用於呈現健康狀態篩檢與評估之資料。

          Short健康狀態篩檢與評估
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-昏迷指數 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1020. Bundle.entry:gcs.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1022. Bundle.entry:gcs.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1024. Bundle.entry:gcs.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1026. Bundle.entry:gcs.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1028. Bundle.entry:gcs.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1030. Bundle.entry:gcs.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1032. Bundle.entry:gcs.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1034. Bundle.entry:gcs.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1036. Bundle.entry:gcs.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1038. Bundle.entry:gcs.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1040. Bundle.entry:gcs.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1042. Bundle.entry:gcs.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1044. Bundle.entry:gcs.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1046. Bundle.entry:gcs.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1048. Bundle.entry:gcs.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1050. Bundle.entry:gcs.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1052. Bundle.entry:gcs.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1054. Bundle.entry:gcs.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1056. Bundle.entry:gcs.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1058. Bundle.entry:gcs.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1060. Bundle.entry:gcs.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1062. Bundle.entry:gcs.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1064. Bundle.entry:gcs.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1066. Bundle.entry:gcs.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1068. Bundle.entry:gcs.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1070. Bundle.entry:bodyHeight
          Slice NamebodyHeight
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short身高。[應填入 StrokeBodyHeight]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1072. Bundle.entry:bodyHeight.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1074. Bundle.entry:bodyHeight.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1076. Bundle.entry:bodyHeight.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1078. Bundle.entry:bodyHeight.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1080. Bundle.entry:bodyHeight.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1082. Bundle.entry:bodyHeight.resource
          Definition

          關於測量和檢查結果的測量,對患者、裝置或其他主體的評估,或健康相關觀察或事件的確認。

          Short身高相關測量
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-身高 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1084. Bundle.entry:bodyHeight.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1086. Bundle.entry:bodyHeight.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1088. Bundle.entry:bodyHeight.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1090. Bundle.entry:bodyHeight.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1092. Bundle.entry:bodyHeight.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1094. Bundle.entry:bodyHeight.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1096. Bundle.entry:bodyHeight.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1098. Bundle.entry:bodyHeight.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1100. Bundle.entry:bodyHeight.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1102. Bundle.entry:bodyHeight.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1104. Bundle.entry:bodyHeight.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1106. Bundle.entry:bodyHeight.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1108. Bundle.entry:bodyHeight.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1110. Bundle.entry:bodyHeight.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1112. Bundle.entry:bodyHeight.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1114. Bundle.entry:bodyHeight.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1116. Bundle.entry:bodyHeight.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1118. Bundle.entry:bodyHeight.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1120. Bundle.entry:bodyHeight.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1122. Bundle.entry:bodyHeight.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1124. Bundle.entry:bodyHeight.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1126. Bundle.entry:bodyHeight.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1128. Bundle.entry:bodyHeight.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1130. Bundle.entry:bodyHeight.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1132. Bundle.entry:bodyHeight.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1134. Bundle.entry:bodyWeight
          Slice NamebodyWeight
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short體重。[應填入 StrokeBodyWeight]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1136. Bundle.entry:bodyWeight.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1138. Bundle.entry:bodyWeight.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1140. Bundle.entry:bodyWeight.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1142. Bundle.entry:bodyWeight.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1144. Bundle.entry:bodyWeight.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1146. Bundle.entry:bodyWeight.resource
          Definition

          此 Profile 用於描述個案於特定時點的體重觀察資料,包含數值、單位、執行者、相關事件等資訊。

          Short用於記錄個案的體重觀察結果(Body Weight Observation)
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-體重 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1148. Bundle.entry:bodyWeight.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1150. Bundle.entry:bodyWeight.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1152. Bundle.entry:bodyWeight.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1154. Bundle.entry:bodyWeight.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1156. Bundle.entry:bodyWeight.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1158. Bundle.entry:bodyWeight.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1160. Bundle.entry:bodyWeight.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1162. Bundle.entry:bodyWeight.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1164. Bundle.entry:bodyWeight.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1166. Bundle.entry:bodyWeight.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1168. Bundle.entry:bodyWeight.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1170. Bundle.entry:bodyWeight.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1172. Bundle.entry:bodyWeight.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1174. Bundle.entry:bodyWeight.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1176. Bundle.entry:bodyWeight.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1178. Bundle.entry:bodyWeight.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1180. Bundle.entry:bodyWeight.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1182. Bundle.entry:bodyWeight.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1184. Bundle.entry:bodyWeight.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1186. Bundle.entry:bodyWeight.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1188. Bundle.entry:bodyWeight.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1190. Bundle.entry:bodyWeight.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1192. Bundle.entry:bodyWeight.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1194. Bundle.entry:bodyWeight.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1196. Bundle.entry:bodyWeight.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1198. Bundle.entry:bodyTemperature
          Slice NamebodyTemperature
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short體溫。[應填入 StrokeBodyTemperature]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1200. Bundle.entry:bodyTemperature.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1202. Bundle.entry:bodyTemperature.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1204. Bundle.entry:bodyTemperature.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1206. Bundle.entry:bodyTemperature.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1208. Bundle.entry:bodyTemperature.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1210. Bundle.entry:bodyTemperature.resource
          Definition

          測量身體產生的熱量。

          Short體溫測量結果
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-體溫 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1212. Bundle.entry:bodyTemperature.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1214. Bundle.entry:bodyTemperature.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1216. Bundle.entry:bodyTemperature.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1218. Bundle.entry:bodyTemperature.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1220. Bundle.entry:bodyTemperature.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1222. Bundle.entry:bodyTemperature.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1224. Bundle.entry:bodyTemperature.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1226. Bundle.entry:bodyTemperature.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1228. Bundle.entry:bodyTemperature.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1230. Bundle.entry:bodyTemperature.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1232. Bundle.entry:bodyTemperature.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1234. Bundle.entry:bodyTemperature.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1236. Bundle.entry:bodyTemperature.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1238. Bundle.entry:bodyTemperature.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1240. Bundle.entry:bodyTemperature.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1242. Bundle.entry:bodyTemperature.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1244. Bundle.entry:bodyTemperature.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1246. Bundle.entry:bodyTemperature.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1248. Bundle.entry:bodyTemperature.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1250. Bundle.entry:bodyTemperature.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1252. Bundle.entry:bodyTemperature.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1254. Bundle.entry:bodyTemperature.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1256. Bundle.entry:bodyTemperature.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1258. Bundle.entry:bodyTemperature.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1260. Bundle.entry:bodyTemperature.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1262. Bundle.entry:heartRate
          Slice NameheartRate
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short心率。[應填入 StrokeHeartRate]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1264. Bundle.entry:heartRate.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1266. Bundle.entry:heartRate.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1268. Bundle.entry:heartRate.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1270. Bundle.entry:heartRate.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1272. Bundle.entry:heartRate.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1274. Bundle.entry:heartRate.resource
          Definition

          測量心臟每分鐘跳動的次數。

          Short心率測量結果
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-心率 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1276. Bundle.entry:heartRate.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1278. Bundle.entry:heartRate.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1280. Bundle.entry:heartRate.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1282. Bundle.entry:heartRate.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1284. Bundle.entry:heartRate.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1286. Bundle.entry:heartRate.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1288. Bundle.entry:heartRate.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1290. Bundle.entry:heartRate.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1292. Bundle.entry:heartRate.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1294. Bundle.entry:heartRate.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1296. Bundle.entry:heartRate.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1298. Bundle.entry:heartRate.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1300. Bundle.entry:heartRate.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1302. Bundle.entry:heartRate.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1304. Bundle.entry:heartRate.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1306. Bundle.entry:heartRate.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1308. Bundle.entry:heartRate.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1310. Bundle.entry:heartRate.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1312. Bundle.entry:heartRate.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1314. Bundle.entry:heartRate.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1316. Bundle.entry:heartRate.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1318. Bundle.entry:heartRate.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1320. Bundle.entry:heartRate.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1322. Bundle.entry:heartRate.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1324. Bundle.entry:heartRate.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1326. Bundle.entry:respiratoryRate
          Slice NamerespiratoryRate
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short呼吸速率。[應填入 StrokeRespiratoryRate]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1328. Bundle.entry:respiratoryRate.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1330. Bundle.entry:respiratoryRate.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1332. Bundle.entry:respiratoryRate.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1334. Bundle.entry:respiratoryRate.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1336. Bundle.entry:respiratoryRate.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1338. Bundle.entry:respiratoryRate.resource
          Definition

          The FHIR Vitals Signs profile 為觀察資源記錄、搜尋和取得與病患相關的生命徵象設定了最低期望值。

          Short呼吸速率觀察紀錄
          Comments

          用於簡單觀察,如儀器量測、實驗室原子結果、生命體徵、身高、體重、吸菸狀態、備註等。其他資源則用於提供觀察的上下文,例如實驗室報告等。

          Control0..1
          TypeObservation(腦中風-呼吸速率 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1340. Bundle.entry:respiratoryRate.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1342. Bundle.entry:respiratoryRate.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1344. Bundle.entry:respiratoryRate.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1346. Bundle.entry:respiratoryRate.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1348. Bundle.entry:respiratoryRate.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1350. Bundle.entry:respiratoryRate.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1352. Bundle.entry:respiratoryRate.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1354. Bundle.entry:respiratoryRate.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1356. Bundle.entry:respiratoryRate.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1358. Bundle.entry:respiratoryRate.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1360. Bundle.entry:respiratoryRate.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1362. Bundle.entry:respiratoryRate.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1364. Bundle.entry:respiratoryRate.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1366. Bundle.entry:respiratoryRate.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1368. Bundle.entry:respiratoryRate.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1370. Bundle.entry:respiratoryRate.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1372. Bundle.entry:respiratoryRate.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1374. Bundle.entry:respiratoryRate.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1376. Bundle.entry:respiratoryRate.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1378. Bundle.entry:respiratoryRate.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1380. Bundle.entry:respiratoryRate.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1382. Bundle.entry:respiratoryRate.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1384. Bundle.entry:respiratoryRate.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1386. Bundle.entry:respiratoryRate.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1388. Bundle.entry:respiratoryRate.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1390. Bundle.entry:bloodPressure
          Slice NamebloodPressure
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short血壓。[應填入 StrokeBloodPressure]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1392. Bundle.entry:bloodPressure.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1394. Bundle.entry:bloodPressure.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1396. Bundle.entry:bloodPressure.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1398. Bundle.entry:bloodPressure.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1400. Bundle.entry:bloodPressure.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1402. Bundle.entry:bloodPressure.resource
          Definition

          This profile defines how to represent Blood Pressure observations in FHIR using a standard LOINC code and UCUM units of measure. This is a grouping structure. It has no value in Observation.valueQuantity but contains at least one component (systolic and/or diastolic).

          ShortFHIR Blood Pressure Profile
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-血壓 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1404. Bundle.entry:bloodPressure.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1406. Bundle.entry:bloodPressure.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1408. Bundle.entry:bloodPressure.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1410. Bundle.entry:bloodPressure.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1412. Bundle.entry:bloodPressure.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1414. Bundle.entry:bloodPressure.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1416. Bundle.entry:bloodPressure.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1418. Bundle.entry:bloodPressure.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1420. Bundle.entry:bloodPressure.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1422. Bundle.entry:bloodPressure.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1424. Bundle.entry:bloodPressure.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1426. Bundle.entry:bloodPressure.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1428. Bundle.entry:bloodPressure.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1430. Bundle.entry:bloodPressure.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1432. Bundle.entry:bloodPressure.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1434. Bundle.entry:bloodPressure.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1436. Bundle.entry:bloodPressure.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1438. Bundle.entry:bloodPressure.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1440. Bundle.entry:bloodPressure.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1442. Bundle.entry:bloodPressure.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1444. Bundle.entry:bloodPressure.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1446. Bundle.entry:bloodPressure.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1448. Bundle.entry:bloodPressure.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1450. Bundle.entry:bloodPressure.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1452. Bundle.entry:bloodPressure.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1454. Bundle.entry:occupation
          Slice Nameoccupation
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short職業。[應填入 StrokeOccupation]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1456. Bundle.entry:occupation.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1458. Bundle.entry:occupation.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1460. Bundle.entry:occupation.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1462. Bundle.entry:occupation.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1464. Bundle.entry:occupation.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1466. Bundle.entry:occupation.resource
          Definition

          關於病人、裝置或其他主體的測量與簡單陳述。

          Short測量與簡單陳述
          Comments

          用於簡單觀察,例如裝置測量、實驗室原子結果、生命徵象、身高、體重、吸菸狀態、備註等。其他資源則用於提供觀察的上下文,例如實驗室報告等。

          Control0..1
          TypeObservation(腦中風-職業 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1468. Bundle.entry:occupation.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1470. Bundle.entry:occupation.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1472. Bundle.entry:occupation.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1474. Bundle.entry:occupation.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1476. Bundle.entry:occupation.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1478. Bundle.entry:occupation.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1480. Bundle.entry:occupation.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1482. Bundle.entry:occupation.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1484. Bundle.entry:occupation.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1486. Bundle.entry:occupation.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1488. Bundle.entry:occupation.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1490. Bundle.entry:occupation.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1492. Bundle.entry:occupation.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1494. Bundle.entry:occupation.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1496. Bundle.entry:occupation.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1498. Bundle.entry:occupation.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1500. Bundle.entry:occupation.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1502. Bundle.entry:occupation.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1504. Bundle.entry:occupation.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1506. Bundle.entry:occupation.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1508. Bundle.entry:occupation.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1510. Bundle.entry:occupation.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1512. Bundle.entry:occupation.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1514. Bundle.entry:occupation.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1516. Bundle.entry:occupation.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1518. Bundle.entry:smokingStatus
          Slice NamesmokingStatus
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short吸菸狀態。[應填入 StrokeSmokingStatus]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1520. Bundle.entry:smokingStatus.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1522. Bundle.entry:smokingStatus.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1524. Bundle.entry:smokingStatus.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1526. Bundle.entry:smokingStatus.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1528. Bundle.entry:smokingStatus.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1530. Bundle.entry:smokingStatus.resource
          Definition

          關於病患吸菸習慣與狀態的觀察結果紀錄。

          Short吸菸狀態觀察值
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-吸菸狀態 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1532. Bundle.entry:smokingStatus.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1534. Bundle.entry:smokingStatus.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1536. Bundle.entry:smokingStatus.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1538. Bundle.entry:smokingStatus.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1540. Bundle.entry:smokingStatus.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1542. Bundle.entry:smokingStatus.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1544. Bundle.entry:smokingStatus.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1546. Bundle.entry:smokingStatus.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1548. Bundle.entry:smokingStatus.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1550. Bundle.entry:smokingStatus.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1552. Bundle.entry:smokingStatus.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1554. Bundle.entry:smokingStatus.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1556. Bundle.entry:smokingStatus.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1558. Bundle.entry:smokingStatus.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1560. Bundle.entry:smokingStatus.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1562. Bundle.entry:smokingStatus.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1564. Bundle.entry:smokingStatus.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1566. Bundle.entry:smokingStatus.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1568. Bundle.entry:smokingStatus.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1570. Bundle.entry:smokingStatus.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1572. Bundle.entry:smokingStatus.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1574. Bundle.entry:smokingStatus.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1576. Bundle.entry:smokingStatus.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1578. Bundle.entry:smokingStatus.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1580. Bundle.entry:smokingStatus.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1582. Bundle.entry:laboratory
          Slice Namelaboratory
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short檢驗結果。[應填入 StrokeLaboratory]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1584. Bundle.entry:laboratory.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1586. Bundle.entry:laboratory.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1588. Bundle.entry:laboratory.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1590. Bundle.entry:laboratory.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1592. Bundle.entry:laboratory.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1594. Bundle.entry:laboratory.resource
          Definition

          對病人、設備或其他對象進行的測量和簡單判定。

          Short檢驗檢查,測量及簡單的判定。
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-檢驗結果 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1596. Bundle.entry:laboratory.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1598. Bundle.entry:laboratory.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1600. Bundle.entry:laboratory.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1602. Bundle.entry:laboratory.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1604. Bundle.entry:laboratory.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1606. Bundle.entry:laboratory.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1608. Bundle.entry:laboratory.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1610. Bundle.entry:laboratory.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1612. Bundle.entry:laboratory.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1614. Bundle.entry:laboratory.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1616. Bundle.entry:laboratory.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1618. Bundle.entry:laboratory.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1620. Bundle.entry:laboratory.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1622. Bundle.entry:laboratory.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1624. Bundle.entry:laboratory.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1626. Bundle.entry:laboratory.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1628. Bundle.entry:laboratory.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1630. Bundle.entry:laboratory.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1632. Bundle.entry:laboratory.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1634. Bundle.entry:laboratory.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1636. Bundle.entry:laboratory.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1638. Bundle.entry:laboratory.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1640. Bundle.entry:laboratory.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1642. Bundle.entry:laboratory.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1644. Bundle.entry:laboratory.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1646. Bundle.entry:procedureResult
          Slice NameprocedureResult
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short處置時點結果。[應填入 StrokeProcedureResult]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1648. Bundle.entry:procedureResult.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1650. Bundle.entry:procedureResult.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1652. Bundle.entry:procedureResult.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1654. Bundle.entry:procedureResult.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1656. Bundle.entry:procedureResult.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1658. Bundle.entry:procedureResult.resource
          Definition

          對病人、設備或其他對象進行的測量和簡單判定。

          Short檢驗檢查,測量及簡單的判定。
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..1
          TypeObservation(腦中風-處置時點結果 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          1660. Bundle.entry:procedureResult.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1662. Bundle.entry:procedureResult.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1664. Bundle.entry:procedureResult.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1666. Bundle.entry:procedureResult.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1668. Bundle.entry:procedureResult.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1670. Bundle.entry:procedureResult.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1672. Bundle.entry:procedureResult.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1674. Bundle.entry:procedureResult.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1676. Bundle.entry:procedureResult.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1678. Bundle.entry:procedureResult.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1680. Bundle.entry:procedureResult.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1682. Bundle.entry:procedureResult.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1684. Bundle.entry:procedureResult.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1686. Bundle.entry:procedureResult.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1688. Bundle.entry:procedureResult.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1690. Bundle.entry:procedureResult.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1692. Bundle.entry:procedureResult.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1694. Bundle.entry:procedureResult.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1696. Bundle.entry:procedureResult.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1698. Bundle.entry:procedureResult.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1700. Bundle.entry:procedureResult.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1702. Bundle.entry:procedureResult.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1704. Bundle.entry:procedureResult.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1706. Bundle.entry:procedureResult.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1708. Bundle.entry:procedureResult.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1710. Bundle.entry:medicationStatement
          Slice NamemedicationStatement
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short用藥紀錄。[應填入 StrokeMedicationStatement]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1712. Bundle.entry:medicationStatement.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1714. Bundle.entry:medicationStatement.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1716. Bundle.entry:medicationStatement.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1718. Bundle.entry:medicationStatement.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1720. Bundle.entry:medicationStatement.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1722. Bundle.entry:medicationStatement.resource
          Definition

          病人正在服藥的紀錄。一份 MedicationStatement(用藥聲明)可能表明病人目前正在、曾經或將來會服藥。此資訊的來源可能是病人、重要他人(如家庭成員或配偶)或臨床醫生。病人就診或住院期間的病史記錄過程是獲取此類資訊的常見場景。藥品資訊可能來自病人的記憶、處方瓶或病人、臨床醫師或其他方維護的藥品清單。 用藥聲明(medication statement)與給藥(medication administration)之間的主要區別在於:給藥具有完整的用藥資訊,並且基於實際由給藥者提供的用藥資訊為基礎。相對而言,用藥聲明通常較為籠統,不會具體記錄用藥的日期或時間,實際上,我們只知道有來源報告說病人目前正在服用這種藥品,但關於用藥的時間、劑量、比例甚至藥物產品的詳細資訊可能不完整、缺失或不太精確。正如前面所提到的,用藥聲明的資訊可能來自病人的記憶、處方瓶或病人、臨床醫生或其他人維護的藥品清單。相比之下,給藥紀錄則更為正式,包含了詳細的用藥資訊。

          Short病人正在服用的藥品紀錄
          Comments

          當解釋用藥聲明時,需要考慮「狀態(status)」和「未服用(NotTaken)」的值:

          MedicationStatement.status + MedicationStatement.wasNotTaken

          • 當status=目前正在發生(Active)+ wasNotTaken=是(T),則 表示目前沒有在服用。
          • 當status=已完成(Completed) + wasNotTaken=是(T) ,則表示過去沒有服用過。
          • 當status=計劃中(Intended) + wasNotTaken=是(T) ,則表示沒有服用的意圖。
          • 當status=目前正在發生(Active) + wasNotTaken=否(F) ,則表示正在服用,但不是按處方服用。
          • 當status=目前(Active) + wasNotTaken=否(F),則表示正在服用。
          • 當status=計劃中(Intended)+ wasNotTaken=否(F),則表示將要服用(尚未開始)。
          • 當status=已完成(Completed) + wasNotTaken=否(F) ,則表示過去已經服用過。
          • 當status=錯誤(In Error)+ wasNotTaken=不適用(N/A),則表示錯誤情況。
          Control0..1
          TypeMedicationStatement(腦中風-用藥紀錄 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          1724. Bundle.entry:medicationStatement.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1726. Bundle.entry:medicationStatement.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1728. Bundle.entry:medicationStatement.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1730. Bundle.entry:medicationStatement.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1732. Bundle.entry:medicationStatement.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1734. Bundle.entry:medicationStatement.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1736. Bundle.entry:medicationStatement.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1738. Bundle.entry:medicationStatement.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1740. Bundle.entry:medicationStatement.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1742. Bundle.entry:medicationStatement.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1744. Bundle.entry:medicationStatement.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1746. Bundle.entry:medicationStatement.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1748. Bundle.entry:medicationStatement.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1750. Bundle.entry:medicationStatement.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1752. Bundle.entry:medicationStatement.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1754. Bundle.entry:medicationStatement.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1756. Bundle.entry:medicationStatement.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1758. Bundle.entry:medicationStatement.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1760. Bundle.entry:medicationStatement.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1762. Bundle.entry:medicationStatement.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1764. Bundle.entry:medicationStatement.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1766. Bundle.entry:medicationStatement.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1768. Bundle.entry:medicationStatement.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1770. Bundle.entry:medicationStatement.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1772. Bundle.entry:medicationStatement.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1774. Bundle.entry:medicationAdministration
          Slice NamemedicationAdministration
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short給藥紀錄。[應填入 StrokeMedicationAdministration]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1776. Bundle.entry:medicationAdministration.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1778. Bundle.entry:medicationAdministration.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1780. Bundle.entry:medicationAdministration.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1782. Bundle.entry:medicationAdministration.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1784. Bundle.entry:medicationAdministration.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1786. Bundle.entry:medicationAdministration.resource
          Definition

          Describes the event of a patient consuming or otherwise being administered a medication. This may be as simple as swallowing a tablet or it may be a long running infusion. Related resources tie this event to the authorizing prescription, and the specific encounter between patient and health care practitioner.

          ShortAdministration of medication to a patient
          Control0..1
          TypeMedicationAdministration(腦中風-給藥紀錄 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          1788. Bundle.entry:medicationAdministration.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1790. Bundle.entry:medicationAdministration.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1792. Bundle.entry:medicationAdministration.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1794. Bundle.entry:medicationAdministration.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1796. Bundle.entry:medicationAdministration.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1798. Bundle.entry:medicationAdministration.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1800. Bundle.entry:medicationAdministration.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1802. Bundle.entry:medicationAdministration.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1804. Bundle.entry:medicationAdministration.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1806. Bundle.entry:medicationAdministration.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1808. Bundle.entry:medicationAdministration.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1810. Bundle.entry:medicationAdministration.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1812. Bundle.entry:medicationAdministration.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1814. Bundle.entry:medicationAdministration.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1816. Bundle.entry:medicationAdministration.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1818. Bundle.entry:medicationAdministration.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1820. Bundle.entry:medicationAdministration.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1822. Bundle.entry:medicationAdministration.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1824. Bundle.entry:medicationAdministration.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1826. Bundle.entry:medicationAdministration.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1828. Bundle.entry:medicationAdministration.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1830. Bundle.entry:medicationAdministration.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1832. Bundle.entry:medicationAdministration.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1834. Bundle.entry:medicationAdministration.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1836. Bundle.entry:medicationAdministration.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1838. Bundle.entry:procedure
          Slice Nameprocedure
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short醫療處置。[應填入 StrokeProcedure]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1840. Bundle.entry:procedure.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1842. Bundle.entry:procedure.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1844. Bundle.entry:procedure.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1846. Bundle.entry:procedure.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1848. Bundle.entry:procedure.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1850. Bundle.entry:procedure.resource
          Definition

          正在或曾經對病人執行的動作。這可以是像手術這樣的身體介入,也可以是像長照服務、諮詢或催眠療法這樣的非侵入性介入。HL7 FHIR官網另有提到的例子包括例如包括診斷處置/手術、內視鏡處置/手術、活體組織切片、諮詢、物理治療、個人支持服務、日照服務、非緊急運輸、改善家居設施、健身活動等。處置/手術可以由醫護人員、服務提供人員、朋友或親屬或在某些情況下由病人自己執行。

          Short正在或曾經對病人執行的動作
          Control0..1
          TypeProcedure(腦中風-醫療處置 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          1852. Bundle.entry:procedure.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1854. Bundle.entry:procedure.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1856. Bundle.entry:procedure.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1858. Bundle.entry:procedure.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1860. Bundle.entry:procedure.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1862. Bundle.entry:procedure.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1864. Bundle.entry:procedure.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1866. Bundle.entry:procedure.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1868. Bundle.entry:procedure.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1870. Bundle.entry:procedure.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1872. Bundle.entry:procedure.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1874. Bundle.entry:procedure.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1876. Bundle.entry:procedure.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1878. Bundle.entry:procedure.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1880. Bundle.entry:procedure.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1882. Bundle.entry:procedure.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1884. Bundle.entry:procedure.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1886. Bundle.entry:procedure.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1888. Bundle.entry:procedure.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1890. Bundle.entry:procedure.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1892. Bundle.entry:procedure.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1894. Bundle.entry:procedure.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1896. Bundle.entry:procedure.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1898. Bundle.entry:procedure.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1900. Bundle.entry:procedure.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1902. Bundle.entry:imagingStudy
          Slice NameimagingStudy
          Definition

          Bundle resource中的條目 - 將包含一個resource或是關於resource的資訊(僅限transactions和history)。

          Short影像檢查。[應填入 StrokeImagingStudy]
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1904. Bundle.entry:imagingStudy.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1906. Bundle.entry:imagingStudy.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1908. Bundle.entry:imagingStudy.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1910. Bundle.entry:imagingStudy.link
          Definition

          為本條目提供情境背景的一系列連結。

          Short與本條目相關的連結
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1912. Bundle.entry:imagingStudy.fullUrl
          Definition

          resource的絕對URL。fullUrl **必須沒有(SHALL NOT)**與resource中的 id 不一致,也就是說如果 fullUrl 不是 urn:uuid,則 URL 應為與 Resource.id 一致的不分版本的URL。fullUrl 是對resource的不分版本參照。fullUrl 資料項目必須有一個值,但以下情況除外:

          在 POST 時,fullUrl 可以為空(雖然在 bundle 中包含暫時 id 時,fullUrl 不需要為空) 操作結果可能涉及未被識別的resources。

          ShortResource的 URI(絕對 URL 伺服器地址或 UUID/OID 的 URI)
          Comments

          fullUrl 在resource上下文中可能不是唯一的。請注意:由於 FHIR resource不需要透過 FHIR API 提供服務,因此 fullURL 可能是一個 URN 或絕對 URL,而不是以resource的邏輯 id(Resource.id)結尾。但是,如果 fullUrl 看起來確實像 RESTful 伺服器 URL(例如:符合正則表達式regex,則 fullUrl 的 「id」部分 必須(SHALL) 以 Resource.id 結尾。

          請注意:fullUrl 與 canonical URL(正準URL) 並不相同,fullUrl是為resource提供服務的端點的絕對 URL(這些在為 resource 帶有 canonical URL 的 Canonical 伺服器上將具有相同的值)。

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1914. Bundle.entry:imagingStudy.resource
          Definition

          DICOM影像檢查中產生的內容。每項檢查包含若干系列(series),每一系列只使用一種影像儀器(例如X光、電腦斷層掃描CT、核磁共振MR、超音波等),每個系列由在相同背景下獲得或製作的服務-物件對實例(Service-Object Pair Instances,簡稱SOP實例,包含影像或其他類型的資料)所組成。但一項檢查中可能包括多個使用不同影像儀器的系列。

          Short在單一檢查中產生的一組影像【一個或多個系列(series)的參照影像】
          Control0..1
          TypeImagingStudy(腦中風-影像檢查 Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
          Is Modifierfalse
          Summaryfalse
          1916. Bundle.entry:imagingStudy.search
          Definition

          有關如何進行查詢才能創建此條目的解釋資訊。

          Short查詢有關的資訊
          Control0..1
          This element is affected by the following invariants: bdl-2
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1918. Bundle.entry:imagingStudy.search.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1920. Bundle.entry:imagingStudy.search.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1922. Bundle.entry:imagingStudy.search.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1924. Bundle.entry:imagingStudy.search.mode
          Definition

          此條目出現在結果集中的原因--是因為符合match要求還是因為 _include 要求,或者是為了傳達有關查詢過程的資訊或警告資訊。

          Shortmatch | include | outcome
          Comments

          只有一種模式。在某些情況下,一個resource可能會被包含,因為它既是match也是include的resource。在這種情況下,「match」優先。

          Control0..1
          BindingThe codes SHALL be taken from SearchEntryMode
          (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

          Resource出現在Bundle中的原因;應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1926. Bundle.entry:imagingStudy.search.score
          Definition

          查詢時,該條目在伺服器上的查詢排名得分。

          Short查詢排名(0至1之間)
          Comments

          伺服器無需返回排名得分,1 表示最相關,0 表示最不相關。通常情況下,查詢結果按得分排序,但用戶可指定不同的排序順序。

          請參閱「病人匹配(Patient Match)」以了解與此資料項目相關的 EMPI 查詢。請參閱[Patient Match](http://hl7.org/fhir/R4/patient-operation-match.html),了解與此要素相關的 EMPI 查詢。

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1928. Bundle.entry:imagingStudy.request
          Definition

          關於如何將條目作為transaction或batch的一部分進行處理的附加資訊。對於history,它顯示如何處理條目以創建條目中包含的版本。

          Short其他執行資訊(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-3
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1930. Bundle.entry:imagingStudy.request.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1932. Bundle.entry:imagingStudy.request.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1934. Bundle.entry:imagingStudy.request.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1936. Bundle.entry:imagingStudy.request.method
          Definition

          在 transaction 或 batch 中,這是此條目要執行的 HTTP 操作。在history Bundle中,這表示發生的 HTTP 操作。

          ShortGET | HEAD | POST | PUT | DELETE | PATCH
          Control1..1
          BindingThe codes SHALL be taken from HTTPVerb
          (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

          應填入所綁定值集中的其中一個代碼。

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1938. Bundle.entry:imagingStudy.request.url
          Definition

          此條目相對於根地址(請求發布的地址)的 URL。

          Short此Bundle HTTP 對應的 URL
          Comments

          例如:對於 病人創建(Patient Create),方法是 「POST」,URL 是 「Patient」。對於病人更新(Patient Update),方法是 「PUT」,URL 是 「Patient/[id]」。

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1940. Bundle.entry:imagingStudy.request.ifNoneMatch
          Definition

          如果 ETag 值匹配,則返回 304 未修改狀態(Not Modified)。請參閱「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1942. Bundle.entry:imagingStudy.request.ifModifiedSince
          Definition

          僅在最後更新日期匹配時執行操作。請參閱 「[有條件讀取(Conditional Read)](http://hl7.org/fhir/R4/http.html#cread)」的 API 文件。

          Short用於管理緩存當前狀態
          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1944. Bundle.entry:imagingStudy.request.ifMatch
          Definition

          只有在 Etag 值匹配時才執行操作。有關詳細資訊,請參閱 API 部分 「[管理resource衝突](http://hl7.org/fhir/R4/http.html#concurrency)」。

          Short用於管理更新衝突
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1946. Bundle.entry:imagingStudy.request.ifNoneExist
          Definition

          如果指定的resource已經存在,則指示伺服器不執行創建。有關詳細資訊,請參閱 「[有條件創建 (Conditional Creage)](http://hl7.org/fhir/R4/http.html#ccreate)」的 API 文件。這只是 URL 的查詢部分,即「? 」後面的內容(不包括「?」)。

          Short用於有條件建立
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1948. Bundle.entry:imagingStudy.response
          Definition

          表表示 batch 或 transaction 中相應「請求」條目的處理結果,或返回history時的操作結果。

          Short執行結果(transaction/batch/history)
          Control0..1
          This element is affected by the following invariants: bdl-4
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1950. Bundle.entry:imagingStudy.response.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          1952. Bundle.entry:imagingStudy.response.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1954. Bundle.entry:imagingStudy.response.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          1956. Bundle.entry:imagingStudy.response.status
          Definition

          處理此條目時返回的狀態編碼。狀態 必須(SHALL) 以三位 HTTP 編碼(如 404)開頭,並可包含與狀態編碼相關的標準 HTTP 描述。

          Short狀態回應代碼(文字選填)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1958. Bundle.entry:imagingStudy.response.location
          Definition

          處理該操作時創建的位置表頭(location header),如果該操作返回位置,則填入該位地置表頭。

          Short位置(如果操作返回位置)
          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1960. Bundle.entry:imagingStudy.response.etag
          Definition

          resource的 Etag,如果條目的操作產生了版本化resource(請參閱 「[Resource Metadata及版本化和管理resource衝突」](http://hl7.org/fhir/R4/http.html#versioning))。

          Shortresource的 Etag(如果有相關)
          Comments

          Etag 與 Resource.meta.versionId 匹配。如果包含resource,ETag 必須與表頭中的版本 ID 相匹配。

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1962. Bundle.entry:imagingStudy.response.lastModified
          Definition

          此resource在伺服器上被修改的日期/時間。

          Short修改時之伺服器日期時間
          Comments

          如果包含resource,則必須與meta.lastUpdated中的時間一致。

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          1964. Bundle.entry:imagingStudy.response.outcome
          Definition

          操作結果(OperationOutcome),包含在batch或transaction中處理此條目時產生的提示和警告。

          Short帶提示和警告的OperationOutcome(用於batch/transaction)
          Comments

          對於 POST/PUT 操作,這是 prefer = operationoutcome 將返回的等價結果,但無論是否返回結果,resource都會被返回。此結果不用於批次處理/異動處理中的錯誤響應,僅用於提示和警告。在批次處理操作中,錯誤將出現在 Bundle.entry.response 中,而在異動處理中,如果出現錯誤,將只有一個 OperationOutcome 而不是一個 bundle。

          Control0..1
          TypeResource
          Is Modifierfalse
          Summarytrue
          1966. Bundle.signature
          Definition

          數位簽章 - base64 編碼。XML-DSig 或 JWT。

          Short數位簽章
          Comments

          簽章可以由bundle的「作者(author)」或是發起的設備所創建。關於是否要包含簽章、如何驗證簽章,以及如何處理已簽章與未簽章的bundle,這些要求會根據實作的環境而有所不同。

          Control0..1
          TypeSignature
          Is Modifierfalse
          Summarytrue
          Requirements

          簽章(Signature)以 FHIR 可存取的形式保存簽章及其支持上下文的電子表述。簽章可以是加密類型(XML DigSig 或 JWS),能夠提供不可否認性證明,也可以是表示簽章或簽章過程的圖形化圖像。該資料項目允許截取 document、message、transation甚至search回應上的簽章,以支持內容驗證、不可否認性或其他業務情況。這主要適用於Bundle可能透過多節點傳輸或其他機制傳輸的情況,因為 HTTPS 的不可否認性是不夠的。

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))