RIVO-Noord Zorgviewer Implementation Guide
1.28.0 - master Netherlands flag

RIVO-Noord Zorgviewer Implementation Guide, published by RIVO-NN HL7NL. This guide is not an authorized publication; it is the continuous build for version 1.28.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/RIVO-Noord/zorgviewer-ig/ and changes regularly. See the Directory of published versions

Resource Profile: VitalSign - Detailed Descriptions

Active as of 2026-11-12

Definitions for the VitalSign resource profile.

See the documentation on how to interpret the contents of this table

0. Observation
Definition

Measurements and simple assertions made about a patient, device or other subject.

ShortMeasurements and simple assertions
Comments

Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as lab reports, etc.

Control0..*
Complies with ProfileThis profile complies with the profile
    Alternate NamesVital Signs, Measurement, Results, Tests
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
    obs-7: If code is the same as a component code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where( (coding.code = %resource.code.coding.code) and (coding.system = %resource.code.coding.system)).empty())
    obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
    dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
    obs-7: If code is the same as a component code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where( (coding.code = %resource.code.coding.code) and (coding.system = %resource.code.coding.system)).empty())
    obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
    2. Observation.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

    This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

    Control0..1
    Typeuri
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    4. Observation.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Alternate Namesextensions, user content
    6. Observation.status
    Definition

    The status of the result value.

    Shortregistered | preliminary | final | amended +
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from ObservationStatushttp://hl7.org/fhir/ValueSet/observation-status|3.0.2
    (required to http://hl7.org/fhir/ValueSet/observation-status|3.0.2)

    Codes providing the status of an observation.

    Typecode
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to track the status of individual results. Some results are finalized before the whole report is finalized.

    8. Observation.code
    Definition

    Describes what was observed. Sometimes this is called the observation "name".

    ShortType of observation (code / type)
    Control1..1
    BindingFor example codes, see LOINC Codeshttp://hl7.org/fhir/ValueSet/observation-codes|3.0.2
    (example to http://hl7.org/fhir/ValueSet/observation-codes|3.0.2)

    Codes identifying names of simple observations.

    TypeCodeableConcept
    Must Supporttrue
    Summarytrue
    Requirements

    Knowing what kind of observation is being made is essential to understanding the observation.

    Alternate NamesName
    10. Observation.code.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control0..*
    TypeCoding
    Must Supporttrue
    Summarytrue
    Requirements

    Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.

    12. Observation.code.text
    Definition

    A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

    ShortPlain text representation of the concept
    Comments

    Very often the text is the same as a displayName of one of the codings.

    Control0..1
    Typestring
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

    14. Observation.effective[x]
    Definition

    The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

    ShortClinically relevant time/time-period for observation
    Comments

    At least a date should be present unless this observation is a historical report.

    Control0..1
    TypeChoice of: dateTime, Period
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summarytrue
    Requirements

    Knowing when an observation was deemed true is important to its relevance as well as determining trends.

    Alternate NamesOccurrence
    16. Observation.performer
    Definition

    Who was responsible for asserting the observed value as "true".

    ShortWho is responsible for the observation
    Control0..*
    TypeReference(Practitioner, Organization, Patient, RelatedPerson)
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summarytrue
    Requirements

    May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

    18. Observation.value[x]
    Definition

    The information determined as a result of making the observation, if the information has a simple value.

    ShortActual result
    Comments

    Normally, an observation will have either a single value or a set of related observations. A few observations (e.g. Apgar score) may have both a value and related observations (for an Apgar score, the observations from which the measure is derived). If a value is present, the datatype for this element should be determined by Observation.code. This element has a variable name depending on the type as follows: valueQuantity, valueCodeableConcept, valueString, valueBoolean, valueRange, valueRatio, valueSampledData, valueAttachment, valueTime, valueDateTime, or valuePeriod. (The name format is "'value' + the type name" with a capital on the first letter of the type).

    If the data element is usually coded or if the type associated with the Observation.value defines a coded value, use CodeableConcept instead of string datatype even if the value is uncoded text. A value set is bound to the ValueCodeableConcept element. For further discussion and examples see the notes section below.

    Control0..1
    This element is affected by the following invariants: obs-7
    TypeChoice of: Quantity, CodeableConcept, string, dateTime, boolean, SampledData, Period, Ratio, Attachment, time, Range
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Must Support TypesChoice of: Quantity, CodeableConcept, string, dateTime, boolean, SampledData, Period, Ratio, Attachment, time, Range
    Summarytrue
    Requirements

    An observation exists to have a value, though it may not if it is in error, or if it represents a group of observations.

    20. Observation.comment
    Definition

    May include statements about significant, unexpected or unreliable values, or information about the source of the value where this may be relevant to the interpretation of the result.

    ShortComments about result
    Control0..1
    Typestring
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Requirements

    Need to be able to provide free text additional information.

    22. Observation.bodySite
    Definition

    Indicates the site on the subject's body where the observation was made (i.e. the target site).

    ShortObserved body part
    Comments

    Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component. If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension body-site-instance.

    Control0..1
    BindingFor example codes, see SNOMED CT Body Structureshttp://hl7.org/fhir/ValueSet/body-site|3.0.2
    (example to http://hl7.org/fhir/ValueSet/body-site|3.0.2)

    Codes describing anatomical locations. May include laterality.

    TypeCodeableConcept
    Must Supporttrue
    24. Observation.method
    Definition

    Indicates the mechanism used to perform the observation.

    ShortHow it was done
    Comments

    Only used if not implicit in code for Observation.code.

    Control0..1
    BindingFor example codes, see Observation Methodshttp://hl7.org/fhir/ValueSet/observation-methods|3.0.2
    (example to http://hl7.org/fhir/ValueSet/observation-methods|3.0.2)

    Methods for simple observations.

    TypeCodeableConcept
    Must Supporttrue
    Requirements

    In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.

    26. Observation.component
    Definition

    Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

    ShortComponent results
    Comments

    For a discussion on the ways Observations can be assembled in groups together see Notes below.

    Control0..*
    TypeBackboneElement
    Summarytrue
    Requirements

    Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    28. Observation.component.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Summarytrue
    Alternate Namesextensions, user content, modifiers
    30. Observation.component.code
    Definition

    Describes what was observed. Sometimes this is called the observation "code".

    ShortType of component observation (code / type)
    Control1..1
    BindingFor example codes, see LOINC Codeshttp://hl7.org/fhir/ValueSet/observation-codes|3.0.2
    (example to http://hl7.org/fhir/ValueSet/observation-codes|3.0.2)

    Codes identifying names of simple observations.

    TypeCodeableConcept
    Summarytrue
    Requirements

    Knowing what kind of observation is being made is essential to understanding the observation.

    32. Observation.component.value[x]
    Definition

    The information determined as a result of making the observation, if the information has a simple value.

    ShortActual component result
    Comments

    Normally, an observation will have either a single value or a set of related observations. A few observations (e.g. Apgar score) may have both a value and related observations (for an Apgar score, the observations from which the measure is derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For boolean values use valueCodeableConcept and select codes from <http://hl7.org/fhir/ValueSet/v2-0136> (these "yes/no" concepts can be mapped to the display name "true/false" or other mutually exclusive terms that may be needed"). The element, Observation.value[x], has a variable name depending on the type as follows: valueQuantity, valueCodeableConcept, valueRatio, valueChoice, valuePeriod, valueSampleData, or valueString (the name format is "'value' + the type name" with a capital on the first letter of the type).

    Control0..1
    TypeQuantity, dateTime, string, SampledData, Period, Ratio, Attachment, time, Range, CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Must Supporttrue
    Must Support TypesQuantity
    Summarytrue
    Requirements

    An observation exists to have a value, though it may not if it is in error, or if it represents a group of observations.

    See the documentation on how to interpret the contents of this table

    0. Observation
    Complies with ProfileThis profile complies with the profile
      2. Observation.code
      Must Supporttrue
      4. Observation.code.coding
      Must Supporttrue
      6. Observation.code.text
      Must Supporttrue
      8. Observation.effective[x]
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Must Supporttrue
      10. Observation.performer
      Must Supporttrue
      12. Observation.value[x]
      TypeChoice of: Quantity, CodeableConcept, string, dateTime, boolean, SampledData, Period, Ratio, Attachment, time, Range
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Must Support TypesChoice of: Quantity, CodeableConcept, string, dateTime, boolean, SampledData, Period, Ratio, Attachment, time, Range
      14. Observation.comment
      Must Supporttrue
      16. Observation.bodySite
      Must Supporttrue
      18. Observation.method
      Must Supporttrue
      20. Observation.component
      22. Observation.component.value[x]
      TypeQuantity, dateTime, string, SampledData, Period, Ratio, Attachment, time, Range, CodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Must Supporttrue
      Must Support TypesQuantity

      See the documentation on how to interpret the contents of this table

      0. Observation
      Definition

      Measurements and simple assertions made about a patient, device or other subject.

      ShortMeasurements and simple assertions
      Comments

      Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as lab reports, etc.

      Control0..*
      Complies with ProfileThis profile complies with the profile
        Alternate NamesVital Signs, Measurement, Results, Tests
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
        obs-7: If code is the same as a component code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where( (coding.code = %resource.code.coding.code) and (coding.system = %resource.code.coding.system)).empty())
        obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
        2. Observation.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        4. Observation.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Summarytrue
        6. Observation.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

        This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

        Control0..1
        Typeuri
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        8. Observation.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from Common Languages
        (extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

        A human language.

        Additional BindingsPurpose
        All LanguagesMax Binding
        Typecode
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        10. Observation.text
        Definition

        A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

        Control0..1
        This element is affected by the following invariants: dom-1
        TypeNarrative
        Alternate Namesnarrative, html, xhtml, display
        12. Observation.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

        Control0..*
        TypeResource
        Alternate Namesinline resources, anonymous resources, contained resources
        14. Observation.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional Content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Alternate Namesextensions, user content
        16. Observation.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Alternate Namesextensions, user content
        18. Observation.identifier
        Definition

        A unique identifier assigned to this observation.

        ShortBusiness Identifier for observation
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Summarytrue
        Requirements

        Allows observations to be distinguished and referenced.

        20. Observation.basedOn
        Definition

        A plan, proposal or order that is fulfilled in whole or in part by this event.

        ShortFulfills plan, proposal or order
        Control0..*
        TypeReference(CarePlan, DeviceRequest, ImmunizationRecommendation, MedicationRequest, NutritionOrder, ProcedureRequest, ReferralRequest)
        Summarytrue
        Requirements

        Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

        Alternate NamesFulfills
        22. Observation.status
        Definition

        The status of the result value.

        Shortregistered | preliminary | final | amended +
        Comments

        This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from ObservationStatus
        (required to http://hl7.org/fhir/ValueSet/observation-status|3.0.2)

        Codes providing the status of an observation.

        Typecode
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to track the status of individual results. Some results are finalized before the whole report is finalized.

        24. Observation.category
        Definition

        A code that classifies the general type of observation being made.

        ShortClassification of type of observation
        Comments

        In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

        Control0..*
        BindingThe codes SHOULD be taken from Observation Category Codes
        (preferred to http://hl7.org/fhir/ValueSet/observation-category|3.0.2)

        Codes for high level observation categories.

        TypeCodeableConcept
        Requirements

        Used for filtering what observations are retrieved and displayed.

        26. Observation.code
        Definition

        Describes what was observed. Sometimes this is called the observation "name".

        ShortType of observation (code / type)
        Control1..1
        BindingFor example codes, see LOINC Codes
        (example to http://hl7.org/fhir/ValueSet/observation-codes|3.0.2)

        Codes identifying names of simple observations.

        TypeCodeableConcept
        Must Supporttrue
        Summarytrue
        Requirements

        Knowing what kind of observation is being made is essential to understanding the observation.

        Alternate NamesName
        28. Observation.code.id
        Definition

        unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        Shortxml:id (or equivalent in JSON)
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        30. Observation.code.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional Content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Alternate Namesextensions, user content
        SlicingThis element introduces a set of slices on Observation.code.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        32. Observation.code.coding
        Definition

        A reference to a code defined by a terminology system.

        ShortCode defined by a terminology system
        Comments

        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

        Control0..*
        TypeCoding
        Must Supporttrue
        Summarytrue
        Requirements

        Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.

        34. Observation.code.text
        Definition

        A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

        ShortPlain text representation of the concept
        Comments

        Very often the text is the same as a displayName of one of the codings.

        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

        36. Observation.subject
        Definition

        The patient, or group of patients, location, or device whose characteristics (direct or indirect) are described by the observation and into whose record the observation is placed. Comments: Indirect characteristics may be those of a specimen, fetus, donor, other observer (for example a relative or EMT), or any observation made about the subject.

        ShortWho and/or what this is about
        Comments

        One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

        If the target of the observation is different than the subject, the general extension observation-focal-subject. may be used. However, the distinction between the patient's own value for an observation versus that of the fetus, or the donor or blood product unit, etc., are often specified in the observation code.

        Control0..1
        TypeReference(Patient, Group, Device, Location)
        Summarytrue
        Requirements

        Observations have no value if you don't know who or what they're about.

        38. Observation.context
        Definition

        The healthcare event (e.g. a patient and healthcare provider interaction) during which this observation is made.

        ShortHealthcare event during which this observation is made
        Comments

        This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter or episode but still be tied to the context of the encounter or episode (e.g. pre-admission lab tests).

        Control0..1
        TypeReference(Encounter, EpisodeOfCare)
        Requirements

        For some observations it may be important to know the link between an observation and a particular encounter.

        Alternate NamesEncounter
        40. Observation.effective[x]
        Definition

        The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

        ShortClinically relevant time/time-period for observation
        Comments

        At least a date should be present unless this observation is a historical report.

        Control0..1
        TypeChoice of: dateTime, Period
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Requirements

        Knowing when an observation was deemed true is important to its relevance as well as determining trends.

        Alternate NamesOccurrence
        42. Observation.issued
        Definition

        The date and time this observation was made available to providers, typically after the results have been reviewed and verified.

        ShortDate/Time this was made available
        Comments

        Updated when the result is updated.

        Control0..1
        Typeinstant
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        44. Observation.performer
        Definition

        Who was responsible for asserting the observed value as "true".

        ShortWho is responsible for the observation
        Control0..*
        TypeReference(Practitioner, Organization, Patient, RelatedPerson)
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Requirements

        May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

        46. Observation.value[x]
        Definition

        The information determined as a result of making the observation, if the information has a simple value.

        ShortActual result
        Comments

        Normally, an observation will have either a single value or a set of related observations. A few observations (e.g. Apgar score) may have both a value and related observations (for an Apgar score, the observations from which the measure is derived). If a value is present, the datatype for this element should be determined by Observation.code. This element has a variable name depending on the type as follows: valueQuantity, valueCodeableConcept, valueString, valueBoolean, valueRange, valueRatio, valueSampledData, valueAttachment, valueTime, valueDateTime, or valuePeriod. (The name format is "'value' + the type name" with a capital on the first letter of the type).

        If the data element is usually coded or if the type associated with the Observation.value defines a coded value, use CodeableConcept instead of string datatype even if the value is uncoded text. A value set is bound to the ValueCodeableConcept element. For further discussion and examples see the notes section below.

        Control0..1
        This element is affected by the following invariants: obs-7
        TypeChoice of: Quantity, CodeableConcept, string
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Must Support TypesChoice of: Quantity, CodeableConcept, string
        Summarytrue
        Requirements

        An observation exists to have a value, though it may not if it is in error, or if it represents a group of observations.

        48. Observation.dataAbsentReason
        Definition

        Provides a reason why the expected value in the element Observation.value[x] is missing.

        ShortWhy the result is missing
        Comments

        Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory". The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

        Control0..1
        This element is affected by the following invariants: obs-6
        BindingUnless not suitable, these codes SHALL be taken from Observation Value Absent Reason
        (extensible to http://hl7.org/fhir/ValueSet/observation-valueabsentreason|3.0.2)

        Codes specifying why the result (Observation.value[x]) is missing.

        TypeCodeableConcept
        Requirements

        For many results it is necessary to handle exceptional values in measurements.

        50. Observation.interpretation
        Definition

        The assessment made based on the result of the observation. Intended as a simple compact code often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result. Otherwise known as abnormal flag.

        ShortHigh, low, normal, etc.
        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from Observation Interpretation Codes
        (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation|3.0.2)

        Codes identifying interpretations of observations.

        TypeCodeableConcept
        Requirements

        For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

        Alternate NamesAbnormal Flag
        52. Observation.comment
        Definition

        May include statements about significant, unexpected or unreliable values, or information about the source of the value where this may be relevant to the interpretation of the result.

        ShortComments about result
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Requirements

        Need to be able to provide free text additional information.

        54. Observation.bodySite
        Definition

        Indicates the site on the subject's body where the observation was made (i.e. the target site).

        ShortObserved body part
        Comments

        Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component. If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension body-site-instance.

        Control0..1
        BindingFor example codes, see SNOMED CT Body Structures
        (example to http://hl7.org/fhir/ValueSet/body-site|3.0.2)

        Codes describing anatomical locations. May include laterality.

        TypeCodeableConcept
        Must Supporttrue
        56. Observation.method
        Definition

        Indicates the mechanism used to perform the observation.

        ShortHow it was done
        Comments

        Only used if not implicit in code for Observation.code.

        Control0..1
        BindingFor example codes, see Observation Methods
        (example to http://hl7.org/fhir/ValueSet/observation-methods|3.0.2)

        Methods for simple observations.

        TypeCodeableConcept
        Must Supporttrue
        Requirements

        In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.

        58. Observation.specimen
        Definition

        The specimen that was used when this observation was made.

        ShortSpecimen used for this observation
        Comments

        Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

        Control0..1
        TypeReference(Specimen)
        60. Observation.device
        Definition

        The device used to generate the observation data.

        Short(Measurement) Device
        Comments

        An extension should be used if further typing of the device is needed. Devices used to support obtaining an observation can be represented using either an extension or through the Observation.related element.

        Control0..1
        TypeReference(Device, DeviceMetric)
        62. Observation.referenceRange
        Definition

        Guidance on how to interpret the value by comparison to a normal or recommended range.

        ShortProvides guide for interpretation
        Comments

        Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this may not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

        Control0..*
        TypeBackboneElement
        Requirements

        Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        obs-3: Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())
        64. Observation.referenceRange.id
        Definition

        unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        Shortxml:id (or equivalent in JSON)
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        66. Observation.referenceRange.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional Content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Alternate Namesextensions, user content
        68. Observation.referenceRange.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Summarytrue
        Alternate Namesextensions, user content, modifiers
        70. Observation.referenceRange.low
        Definition

        The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3).

        ShortLow Range, if relevant
        Control0..1
        This element is affected by the following invariants: obs-3
        TypeQuantity(SimpleQuantity)
        Invariantssqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
        72. Observation.referenceRange.high
        Definition

        The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3).

        ShortHigh Range, if relevant
        Control0..1
        This element is affected by the following invariants: obs-3
        TypeQuantity(SimpleQuantity)
        Invariantssqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
        74. Observation.referenceRange.type
        Definition

        Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.

        ShortReference range qualifier
        Comments

        This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.

        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from Observation Reference Range Meaning Codes
        (extensible to http://hl7.org/fhir/ValueSet/referencerange-meaning|3.0.2)

        Code for the meaning of a reference range.

        TypeCodeableConcept
        Requirements

        Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc, - for proper interpretation.

        76. Observation.referenceRange.appliesTo
        Definition

        Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race.

        ShortReference range population
        Comments

        This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.

        Control0..*
        BindingFor example codes, see Observation Reference Range Applies To Codes
        (example to http://hl7.org/fhir/ValueSet/referencerange-appliesto|3.0.2)

        Codes identifying the population the reference range applies to.

        TypeCodeableConcept
        Requirements

        Need to be able to identify the target population for proper interpretation.

        78. Observation.referenceRange.age
        Definition

        The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so.

        ShortApplicable age range, if relevant
        Control0..1
        TypeRange
        Requirements

        Some analytes vary greatly over age.

        80. Observation.referenceRange.text
        Definition

        Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of "Negative" or a list or table of 'normals'.

        ShortText based reference range in an observation
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        82. Observation.related
        Definition

        A reference to another resource (usually another Observation) whose relationship is defined by the relationship type code.

        ShortResource related to this observation
        Comments

        For a discussion on the ways Observations can assembled in groups together see Notes below.

        Control0..*
        TypeBackboneElement
        Summarytrue
        Requirements

        Normally, an observation will have either a value or a set of related observations. A few observations (e.g. Apgar score) may have both a value and a set of related observations or sometimes a QuestionnaireResponse from which the measure is derived.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        84. Observation.related.id
        Definition

        unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        Shortxml:id (or equivalent in JSON)
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        86. Observation.related.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional Content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Alternate Namesextensions, user content
        88. Observation.related.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Summarytrue
        Alternate Namesextensions, user content, modifiers
        90. Observation.related.type
        Definition

        A code specifying the kind of relationship that exists with the target resource.

        Shorthas-member | derived-from | sequel-to | replaces | qualified-by | interfered-by
        Comments

        The "derived-from" type is the only logical choice when referencing the QuestionnaireAnswer resource.

        Control0..1
        BindingThe codes SHALL be taken from ObservationRelationshipType
        (required to http://hl7.org/fhir/ValueSet/observation-relationshiptypes|3.0.2)

        Codes specifying how two observations are related.

        Typecode
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Requirements

        A relationship type SHOULD be provided.

        92. Observation.related.target
        Definition

        A reference to the observation or QuestionnaireResponse resource that is related to this observation.

        ShortResource that is related to this one
        Control1..1
        TypeReference(Observation, QuestionnaireResponse, Sequence)
        94. Observation.component
        Definition

        Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

        ShortComponent results
        Comments

        For a discussion on the ways Observations can be assembled in groups together see Notes below.

        Control0..*
        TypeBackboneElement
        Summarytrue
        Requirements

        Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        96. Observation.component.id
        Definition

        unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        Shortxml:id (or equivalent in JSON)
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        98. Observation.component.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional Content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Alternate Namesextensions, user content
        100. Observation.component.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Summarytrue
        Alternate Namesextensions, user content, modifiers
        102. Observation.component.code
        Definition

        Describes what was observed. Sometimes this is called the observation "code".

        ShortType of component observation (code / type)
        Control1..1
        BindingFor example codes, see LOINC Codes
        (example to http://hl7.org/fhir/ValueSet/observation-codes|3.0.2)

        Codes identifying names of simple observations.

        TypeCodeableConcept
        Summarytrue
        Requirements

        Knowing what kind of observation is being made is essential to understanding the observation.

        104. Observation.component.value[x]
        Definition

        The information determined as a result of making the observation, if the information has a simple value.

        ShortActual component result
        Comments

        Normally, an observation will have either a single value or a set of related observations. A few observations (e.g. Apgar score) may have both a value and related observations (for an Apgar score, the observations from which the measure is derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For boolean values use valueCodeableConcept and select codes from <http://hl7.org/fhir/ValueSet/v2-0136> (these "yes/no" concepts can be mapped to the display name "true/false" or other mutually exclusive terms that may be needed"). The element, Observation.value[x], has a variable name depending on the type as follows: valueQuantity, valueCodeableConcept, valueRatio, valueChoice, valuePeriod, valueSampleData, or valueString (the name format is "'value' + the type name" with a capital on the first letter of the type).

        Control0..1
        TypeQuantity
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Must Supporttrue
        Must Support TypesQuantity
        Summarytrue
        Requirements

        An observation exists to have a value, though it may not if it is in error, or if it represents a group of observations.

        106. Observation.component.dataAbsentReason
        Definition

        Provides a reason why the expected value in the element Observation.value[x] is missing.

        ShortWhy the component result is missing
        Comments

        "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done". The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

        Control0..1
        This element is affected by the following invariants: obs-6
        BindingUnless not suitable, these codes SHALL be taken from Observation Value Absent Reason
        (extensible to http://hl7.org/fhir/ValueSet/observation-valueabsentreason|3.0.2)

        Codes specifying why the result (Observation.value[x]) is missing.

        TypeCodeableConcept
        Requirements

        For many results it is necessary to handle exceptional values in measurements.

        108. Observation.component.interpretation
        Definition

        The assessment made based on the result of the observation. Intended as a simple compact code often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result. Otherwise known as abnormal flag.

        ShortHigh, low, normal, etc.
        Comments

        The component interpretation applies only to the individual component value. For an overall interpretation all components together use thes Observation.interpretation element.

        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from Observation Interpretation Codes
        (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation|3.0.2)

        Codes identifying interpretations of observations.

        TypeCodeableConcept
        Requirements

        For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

        Alternate NamesAbnormal Flag
        110. Observation.component.referenceRange
        Definition

        Guidance on how to interpret the value by comparison to a normal or recommended range.

        ShortProvides guide for interpretation of component result
        Comments

        Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this may not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
        Requirements

        Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.