A task to be performed.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

R5: Task.requestedPeriod (new:Period)

Element Task.requestedPeriod has a context of Task based on following the parent source element upwards and mapping to Task. Element Task.requestedPeriod has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This is typically used when the Task is not seeking fulfillment of a focus Request, as in that case the period would be specified on the Request and/or in the Task.restriction.period. Instead, it is used for stand-alone tasks.

R5: Task.requestedPerformer (new:CodeableReference(Practitioner,PractitionerRole,Organization,CareTeam,HealthcareService,Patient,Device,RelatedPerson))

Element Task.requestedPerformer has a context of Task based on following the parent source element upwards and mapping to Task. Element Task.requestedPerformer has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

R5: Task.performer (new:BackboneElement)

Element Task.performer has a context of Task based on following the parent source element upwards and mapping to Task. Element Task.performer has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

An Extension

R5: Task.doNotPerform (new:boolean)

Element Task.doNotPerform has a context of Task based on following the parent source element upwards and mapping to Task. Element Task.doNotPerform has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element Task.doNotPerform: http://hl7.org/fhir/StructureDefinition/request-doNotPerform. The attributes provided with the Task qualify what is not to be done. For example, if a requestedPeriod is provided, the 'do not' request only applies within the specified time. If a requestedPerformer is specified then the 'do not' request only applies to performers of that type. Qualifiers include: code, subject, occurrence, requestedPerformer and performer.

In some cases, the Request.code may pre-coordinate prohibition into the requested action. E.g. 'NPO' (nothing by mouth), 'DNR' (do not recussitate). If this happens, doNotPerform SHALL NOT be set to true. I.e. The resource shall not have double negation. (E.g. 'Do not DNR').

doNotPerform should ONLY be used with Tasks that are tightly bounded in time or process phase. E.g. 'Do not fulfill the midnight dose of medication X tonight due to the early morning scheduled procedure, where the nurse could reasonably check off 'Med X not given at midnight as instructed'. Similarly, a decision support proposal that a patient should not be given a standard intake questionnaire (because the patient is cognitively impaired) would be marked as 'complete' or 'rejected' when the clinician preps the CarePlan or order set after reviewing the decision support results. If there is a need to create a standing order to not do something that can't be satisfied by a single 'non-action', but rather an ongoing refusal to perform the function, MedicationRequest, ServiceRequest or some other form of authorization should be used.

The current status of the task.

The current status of the task.

These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.

Indicates the "level" of actionability associated with the Task, i.e. i+R[9]Cs this a proposed task, a planned task, an actionable task, etc.

This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances.

In most cases, Tasks will have an intent of "order".

Distinguishes whether the task is a proposal, plan or full order.

A name or code (or both) briefly describing what the task involves.

The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.

The request being actioned or the resource being manipulated by this task.

If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).

Used to identify the thing to be done.

The entity who benefits from the performance of the service specified in the task (e.g., the patient).

Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control.

The date and time this task was created.

Most often used along with lastUpdated to track duration of task to supporting monitoring and management.

The creator of the task.

Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).

Individual organization or Device currently responsible for task execution.

Tasks may be created with an owner not yet identified.

Identifies who is expected to perform this task.

A description or code indicating why this task needs to be performed.

This should only be included if there is no focus or if it differs from the reason indicated on the focus.

Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.

Additional information that may be needed in the execution of the task.

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

R5: Task.input.value[x] additional types (CodeableReference, RatioRange, Availability, ExtendedContactDetail)

Element Task.input.value[x] is mapped to FHIR R4 element Task.input.value[x] as RelatedTo. The mappings for Task.input.value[x] do not cover the following types: Availability, CodeableReference, ExtendedContactDetail, RatioRange. The target context Task.input.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Task.input.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A code or description indicating how the input is intended to be used as part of the task execution.

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Inputs are named to enable task automation to bind data and pass it from one task to the next.

The value of the input parameter as a basic type.

Indicates the questionnaire to be completed.

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

R5: Task.input.value[x] additional types (CodeableReference, RatioRange, Availability, ExtendedContactDetail)

Element Task.input.value[x] is mapped to FHIR R4 element Task.input.value[x] as RelatedTo. The mappings for Task.input.value[x] do not cover the following types: Availability, CodeableReference, ExtendedContactDetail, RatioRange. The target context Task.input.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Task.input.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A code or description indicating how the input is intended to be used as part of the task execution.

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Inputs are named to enable task automation to bind data and pass it from one task to the next.

The value of the input parameter as a basic type.

Indicates an endpoint the form should be posted to on completion.

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

R5: Task.input.value[x] additional types (CodeableReference, RatioRange, Availability, ExtendedContactDetail)

Element Task.input.value[x] is mapped to FHIR R4 element Task.input.value[x] as RelatedTo. The mappings for Task.input.value[x] do not cover the following types: Availability, CodeableReference, ExtendedContactDetail, RatioRange. The target context Task.input.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Task.input.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A code or description indicating how the input is intended to be used as part of the task execution.

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Inputs are named to enable task automation to bind data and pass it from one task to the next.

The value of the input parameter as a basic type.

Outputs produced by the Task.

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

R5: Task.output.value[x] additional types (CodeableReference, RatioRange, Availability, ExtendedContactDetail)

Element Task.output.value[x] is mapped to FHIR R4 element Task.output.value[x] as RelatedTo. The mappings for Task.output.value[x] do not cover the following types: Availability, CodeableReference, ExtendedContactDetail, RatioRange. The target context Task.output.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Task.output.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The name of the Output parameter.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

Outputs are named to enable task automation to bind data and pass it from one task to the next.

The value of the Output parameter as a basic type.

Task outputs can take any form.

Indicates the questionnaire response resulting from the request.

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

R5: Task.output.value[x] additional types (CodeableReference, RatioRange, Availability, ExtendedContactDetail)

Element Task.output.value[x] is mapped to FHIR R4 element Task.output.value[x] as RelatedTo. The mappings for Task.output.value[x] do not cover the following types: Availability, CodeableReference, ExtendedContactDetail, RatioRange. The target context Task.output.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Task.output.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The name of the Output parameter.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

Outputs are named to enable task automation to bind data and pass it from one task to the next.

The value of the Output parameter as a basic type.

Task outputs can take any form.

Indicates the questionnaire to be completed.

Indicates an endpoint the form should be posted to on completion.

Indicates the questionnaire response resulting from the request.

A task to be performed.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

A human language.

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

An Extension

R5: Task.requestedPeriod (new:Period)

Element Task.requestedPeriod has a context of Task based on following the parent source element upwards and mapping to Task. Element Task.requestedPeriod has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This is typically used when the Task is not seeking fulfillment of a focus Request, as in that case the period would be specified on the Request and/or in the Task.restriction.period. Instead, it is used for stand-alone tasks.

R5: Task.requestedPerformer (new:CodeableReference(Practitioner,PractitionerRole,Organization,CareTeam,HealthcareService,Patient,Device,RelatedPerson))

Element Task.requestedPerformer has a context of Task based on following the parent source element upwards and mapping to Task. Element Task.requestedPerformer has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

R5: Task.performer (new:BackboneElement)

Element Task.performer has a context of Task based on following the parent source element upwards and mapping to Task. Element Task.performer has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

An Extension

R5: Task.doNotPerform (new:boolean)

Element Task.doNotPerform has a context of Task based on following the parent source element upwards and mapping to Task. Element Task.doNotPerform has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element Task.doNotPerform: http://hl7.org/fhir/StructureDefinition/request-doNotPerform. The attributes provided with the Task qualify what is not to be done. For example, if a requestedPeriod is provided, the 'do not' request only applies within the specified time. If a requestedPerformer is specified then the 'do not' request only applies to performers of that type. Qualifiers include: code, subject, occurrence, requestedPerformer and performer.

In some cases, the Request.code may pre-coordinate prohibition into the requested action. E.g. 'NPO' (nothing by mouth), 'DNR' (do not recussitate). If this happens, doNotPerform SHALL NOT be set to true. I.e. The resource shall not have double negation. (E.g. 'Do not DNR').

doNotPerform should ONLY be used with Tasks that are tightly bounded in time or process phase. E.g. 'Do not fulfill the midnight dose of medication X tonight due to the early morning scheduled procedure, where the nurse could reasonably check off 'Med X not given at midnight as instructed'. Similarly, a decision support proposal that a patient should not be given a standard intake questionnaire (because the patient is cognitively impaired) would be marked as 'complete' or 'rejected' when the clinician preps the CarePlan or order set after reviewing the decision support results. If there is a need to create a standing order to not do something that can't be satisfied by a single 'non-action', but rather an ongoing refusal to perform the function, MedicationRequest, ServiceRequest or some other form of authorization should be used.

The business identifier for this task.

The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.

Enables a formal definition of how he task is to be performed, enabling automation.

The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.

Enables a formal definition of how he task is to be performed (e.g. using BPMN, BPEL, XPDL or other formal notation to be associated with a task), enabling automation.

BasedOn refers to a higher-level authorization that triggered the creation of the task. It references a "request" resource such as a ServiceRequest, MedicationRequest, ServiceRequest, CarePlan, etc. which is distinct from the "request" resource the task is seeking to fulfill. This latter resource is referenced by FocusOn. For example, based on a ServiceRequest (= BasedOn), a task is created to fulfill a procedureRequest ( = FocusOn ) to collect a specimen from a patient.

An identifier that links together multiple tasks and other requests that were created in the same context.

Billing and/or reporting can be linked to whether multiple requests were created as a single unit.

Task that this particular task is part of.

This should usually be 0..1.

Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

The current status of the task.

The current status of the task.

These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.

An explanation as to why this task is held, failed, was refused, etc.

This applies to the current status. Look at the history of the task to see reasons for past statuses.

Codes to identify the reason for current status. These will typically be specific to a particular workflow.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: Task.statusReason additional types (CodeableReference) additional types from child elements (reference)

Element Task.statusReason is mapped to FHIR R4 element Task.statusReason as SourceIsBroaderThanTarget. The mappings for Task.statusReason do not cover the following types: CodeableReference. The mappings for Task.statusReason do not cover the following types based on type expansion: reference. This applies to the current status. Look at the history of the task to see reasons for past statuses.

A reference to a code defined by a terminology system.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Allows for alternative encodings within a code system, and translations to other code systems.

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Very often the text is the same as a displayName of one of the codings.

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Contains business-specific nuances of the business state.

The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.

There's often a need to track substates of a task - this is often variable by specific workflow implementation.

Indicates the "level" of actionability associated with the Task, i.e. i+R[9]Cs this a proposed task, a planned task, an actionable task, etc.

This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances.

In most cases, Tasks will have an intent of "order".

Distinguishes whether the task is a proposal, plan or full order.

Indicates how quickly the Task should be addressed with respect to other requests.

The task's priority.

Used to identify the service level expected while performing a task.

A name or code (or both) briefly describing what the task involves.

The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.

A free-text description of what is to be performed.

The request being actioned or the resource being manipulated by this task.

If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).

Used to identify the thing to be done.

The entity who benefits from the performance of the service specified in the task (e.g., the patient).

Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control.

The healthcare event (e.g. a patient and healthcare provider interaction) during which this task was created.

For some tasks it may be important to know the link between the encounter the task originated within.

Identifies the time action was first taken against the task (start) and/or the time final action was taken against the task prior to marking it as completed (end).

The date and time this task was created.

Most often used along with lastUpdated to track duration of task to supporting monitoring and management.

The date and time of last modification to this task.

Used along with history to track task activity and time in a particular task state. This enables monitoring and management.

The creator of the task.

Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).

The kind of participant that should perform the task.

The type(s) of task performers allowed.

Use to distinguish tasks on different activity queues.

Individual organization or Device currently responsible for task execution.

Tasks may be created with an owner not yet identified.

Identifies who is expected to perform this task.

Principal physical location where the this task is performed.

Ties the event to where the records are likely kept and provides context around the event occurrence (e.g. if it occurred inside or outside a dedicated healthcare setting).

A description or code indicating why this task needs to be performed.

This should only be included if there is no focus or if it differs from the reason indicated on the focus.

Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.

A resource reference indicating why this task needs to be performed.

Tasks might be justified based on an Observation, a Condition, a past or planned procedure, etc. This should only be included if there is no focus or if it differs from the reason indicated on the focus. Use the CodeableConcept text element in Task.reasonCode if the data is free (uncoded) text.

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be relevant to the Task.

Free-text information captured about the task as it progresses.

Links to Provenance records for past versions of this Task that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the task.

This element does not point to the Provenance associated with the current version of the resource - as it would be created after this version existed. The Provenance for the current version can be retrieved with a _revinclude.

If the Task.focus is a request resource and the task is seeking fulfillment (i.e. is asking for the request to be actioned), this element identifies any limitations on what parts of the referenced request should be actioned.

Sometimes when fulfillment is sought, you don't want full fulfillment.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Indicates the number of times the requested action should occur.

E.g. order that requests monthly lab tests, fulfillment is sought for 1.

Over what time-period is fulfillment sought.

Note that period.high is the due date representing the time by which the task should be completed.

E.g. order that authorizes 1 year's services. Fulfillment is sought for next 3 months.

For requests that are targeted to more than on potential recipient/target, for whom is fulfillment sought?

Additional information that may be needed in the execution of the task.

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: Task.input.value[x] additional types (CodeableReference, RatioRange, Availability, ExtendedContactDetail)

Element Task.input.value[x] is mapped to FHIR R4 element Task.input.value[x] as RelatedTo. The mappings for Task.input.value[x] do not cover the following types: Availability, CodeableReference, ExtendedContactDetail, RatioRange. The target context Task.input.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Task.input.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A code or description indicating how the input is intended to be used as part of the task execution.

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Inputs are named to enable task automation to bind data and pass it from one task to the next.

The value of the input parameter as a basic type.

Indicates the questionnaire to be completed.

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: Task.input.value[x] additional types (CodeableReference, RatioRange, Availability, ExtendedContactDetail)

Element Task.input.value[x] is mapped to FHIR R4 element Task.input.value[x] as RelatedTo. The mappings for Task.input.value[x] do not cover the following types: Availability, CodeableReference, ExtendedContactDetail, RatioRange. The target context Task.input.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Task.input.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A code or description indicating how the input is intended to be used as part of the task execution.

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Inputs are named to enable task automation to bind data and pass it from one task to the next.

The value of the input parameter as a basic type.

Indicates an endpoint the form should be posted to on completion.

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: Task.input.value[x] additional types (CodeableReference, RatioRange, Availability, ExtendedContactDetail)

Element Task.input.value[x] is mapped to FHIR R4 element Task.input.value[x] as RelatedTo. The mappings for Task.input.value[x] do not cover the following types: Availability, CodeableReference, ExtendedContactDetail, RatioRange. The target context Task.input.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Task.input.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A code or description indicating how the input is intended to be used as part of the task execution.

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Inputs are named to enable task automation to bind data and pass it from one task to the next.

The value of the input parameter as a basic type.

Outputs produced by the Task.

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: Task.output.value[x] additional types (CodeableReference, RatioRange, Availability, ExtendedContactDetail)

Element Task.output.value[x] is mapped to FHIR R4 element Task.output.value[x] as RelatedTo. The mappings for Task.output.value[x] do not cover the following types: Availability, CodeableReference, ExtendedContactDetail, RatioRange. The target context Task.output.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Task.output.