CH EMED EPR
1.0.1-ci-build - ci-build
CH EMED EPR
1.0.1-ci-build - ci-build
CH EMED EPR, published by CARA. This guide is not an authorized publication; it is the continuous build for version 1.0.1-ci-build built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/CARA-ch/ch-emed-epr/ and changes regularly. See the Directory of published versions
| Draft as of 2024-04-05 |
Definitions for the ch-emed-epr-amount-range data type profile.
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| 2. Range.id | |
| Definition | Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile. |
| Short | ✕ This element is not supported |
| Standards Status | Draft (from Normative) |
| 4. Range.extension | |
| Definition | Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile. |
| Short | ✕ This element is not supported |
| Standards Status | Draft (from Normative) |
| 6. Range.low | |
| Control | 1..? |
| Type | Quantity(Amount Quantity) |
| 8. Range.high | |
| Control | 1..? |
| Type | Quantity(Amount Quantity) |
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| Definition | A set of ordered Quantities defined by a low and high limit. |
| Short | Set of values bounded by low and high |
| Comments | The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) rng-2: If present, low SHALL have a lower value than high ( low.empty() or high.empty() or (low <= high))rng-2: If present, low SHALL have a lower value than high (low.empty() or high.empty() or (low <= high)) |
| 2. Range.id | |
| Definition | Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile. Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | ✕ This element is not supportedUnique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Range.extension | |
| Definition | Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ✕ This element is not supportedAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Range.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 6. Range.low | |
| Definition | The comparator is not used on a SimpleQuantity The low limit. The boundary is inclusive. |
| Short | A fixed quantity (no comparator)Low limit |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. If the low element is missing, the low boundary is not known. |
| Control | 10..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(Amount Quantity, SimpleQuantity) |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |
| 8. Range.high | |
| Definition | The comparator is not used on a SimpleQuantity The high limit. The boundary is inclusive. |
| Short | A fixed quantity (no comparator)High limit |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. If the high element is missing, the high boundary is not known. |
| Control | 10..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(Amount Quantity, SimpleQuantity) |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| Definition | A set of ordered Quantities defined by a low and high limit. |
| Short | Set of values bounded by low and high |
| Comments | The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))rng-2: If present, low SHALL have a lower value than high ( low.empty() or high.empty() or (low <= high)) |
| 2. Range.id | |
| Definition | Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile. |
| Short | ✕ This element is not supported |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Range.extension | |
| Definition | Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile. |
| Short | ✕ This element is not supported |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Range.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 6. Range.low | |
| Definition | The comparator is not used on a SimpleQuantity |
| Short | A fixed quantity (no comparator) |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. |
| Control | 1..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(Amount Quantity) |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |
| 8. Range.high | |
| Definition | The comparator is not used on a SimpleQuantity |
| Short | A fixed quantity (no comparator) |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. |
| Control | 1..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(Amount Quantity) |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |