An order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

An Extension

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

An authorized representative is a person authorized to collect medications from the pharmacy on behalf of the patient based on a written prescription.

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Identifiers associated with this medication request that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

This is a business identifier, not a resource identifier.

The purpose of this identifier.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Allows users to make use of identifiers when the identifier system is not known.

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

A code specifying the current state of the order. Generally, this will be active or completed state.

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Clinical decision support systems should take the status into account when determining which medications to include in their algorithms.

Reason for the current prescription status, entered by physicians or pharmacists in DMED

This is generally only used for "exception" statuses such as "suspended" or "cancelled". The reason why the MedicationRequest was created at all is captured in reasonCode, not here.

The date (and perhaps time) when the status was changed.

Whether the request is a proposal, plan, or an original order.

It is expected that the type of requester will be restricted for different stages of a MedicationRequest. For example, Proposals can be created by a patient, relatedPerson, Practitioner or Device. Plans can be created by Practitioners, Patients, RelatedPersons and Devices. Original orders can be created by a Practitioner only.

An instance-order is an instantiation of a request or order and may be used to populate Medication Administration Record.

This element is labeled as a modifier because the intent alters when and how the resource is actually applicable.

An arbitrary categorization or grouping of the medication request. It could be used for indicating where meds are intended to be administered, eg. in an inpatient setting or in a patient's home, or a legal category of the medication.

The category can be used to include where the medication is expected to be consumed or other types of requests. The examplar value set represents where the meds are intended to be administered and is just one example of request categorization.

If true, indicates that the provider is asking for the patient to either stop taking or to not start taking the specified medication. For example, the patient is taking an existing medication and the provider is changing their medication. They want to create two seperate requests: one to stop using the current medication and another to start the new medication.

If do not perform is not specified, the request is a positive request e.g. "do perform".

Identifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications.

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the Medication resource is recommended. For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource.

A coded concept identifying substance or product that can be ordered.

The individual or group for whom the medication has been requested.

The subject on a medication request is mandatory. For the secondary use case where the actual subject is not provided, there still must be an anonymized subject specified.

The person or organization who provided the information about this request, if the source is someone other than the requestor. This is often used when the MedicationRequest is reported by another person.

The Encounter during which this [x] was created or to which the creation of this record is tightly associated.

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter." If there is a need to link to episodes of care they will be handled with an extension.

The date (and perhaps time) when the prescription was initially written or authored on.

The individual, organization, or device that initiated the request and has responsibility for its activation.

The reason or the indication for ordering or not ordering the medication.

This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonReference.

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be required for delivering the requested service.

Extra information about the prescription that could not be conveyed by the other attributes.

The period over which the medication is to be taken. Where there are multiple dosageInstruction lines (for example, tapering doses), this is the earliest date and the latest end date of the dosageInstructions.

Specific instructions for how the medication is to be used by the patient.

There are examples where a medication request may include the option of an oral dose or an Intravenous or Intramuscular dose. For example, "Ondansetron 8mg orally or IV twice a day as needed for nausea" or "Compazine® (prochlorperazine) 5-10mg PO or 25mg PR bid prn nausea or vomiting". In these cases, two medication requests would be created that could be grouped together. The decision on which dose and route of administration to use is based on the patient's condition at the time the dose is needed. In general, each prescribed drug will be a separate Medication Request.

When drug orders are grouped together at the time of order entry, but each of the drugs can be manipulated independently e.g. changing the status of one order to "completed" or "cancelled", changing another order status to "on-hold", the method to "group" all of the medication requests together is to use MedicationRequest.groupIdentifier element. All of the orders grouped together in this manner will have the same groupIdentifier, and separately, each order in the group may have a unique identifier.

There are cases that require grouping of Medication orders together when it is necessary to specify optionality e.g. order two drugs at one time, but stating either of these drugs may be used to treat the patient. The use of a RequestOrchestration should be used as a parent for the Medication orders that require this type of grouping. An example when it may be necessary to group medication orders together is when you specify timing relationships e.g. order drug "xyz" with dose 123, then taper the same drug to a different dose after some interval of time precedence: e.g. give drug "abc" followed by drug "def" e.g. give drug 30 minutes before some procedure was performed more generically this supports - hierarchical groups of actions, where each specific action references the action to be performed (in terms of a Request resource), and each group describes additional behavior, relationships, and applicable conditions between the actions in the overall group. Note that one should NOT use the List or Composition resource to accomplish the above requirements. You may use List or Composition for other business requirements, but not to address the specific requirements of grouping medication orders.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Instructions in terms that are understood by the patient or consumer.

SHOULD BE USED:

• frequency should be used with period and periodUntil
• frequency should be used with timeOfDay SHOULD NOT BE USED:
• 'when' should not be used with 'timeOfDay'
• event should not be used with bounds[x]
• bounds[x] should not be used with count
• event should not be used with period and Frequency
• event should not be used with timeOfDay and DayOfWeek
• period should not be used if timeOfDay + Exact Times (Count)
• period should not be used if when + countMax
• period should not be used with boundsRange
• 'dayOfWeek' and 'periodUnit' should not be used together
• dayOfWeek and timeOfDay should not be used with count
• dayOfWeek should not be used with boundsRange
• frequency should not be used with count alone unless there is a cycle

This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing.

The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A set of rules that describe when the event is scheduled.

Many timing schedules are determined by regular repetitions.

Either a duration for the length of the timing schedule, a range of possible length, or outer bounds for start and/or end limits of the timing schedule.

A total count of the desired number of repetitions across the duration of the entire timing specification. If countMax is present, this element indicates the lower bound of the allowed range of count values.

If you have both bounds and count, then this should be understood as within the bounds period, until count times happens.

Repetitions may be limited by end time or total occurrences.

If present, indicates that the count is a range - so to perform the action between [count] and [countMax] times.

How long this thing happens for when it happens. If durationMax is present, this element indicates the lower bound of the allowed range of the duration.

For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).

Some activities are not instantaneous and need to be maintained for a period of time.

The units of time for the duration, in UCUM units Normal practice is to use the 'mo' code as a calendar month when calculating the next occurrence.

A unit of time (units from UCUM).

The number of times to repeat the action within the specified period. If frequencyMax is present, this element indicates the lower bound of the allowed range of the frequency.

Indicates the duration of time over which repetitions are to occur; e.g. to express "3 times per day", 3 would be the frequency and "1 day" would be the period. If periodMax is present, this element indicates the lower bound of the allowed range of the period length.

The units of time for the period in UCUM units Normal practice is to use the 'mo' code as a calendar month when calculating the next occurrence.

A unit of time (units from UCUM).

If one or more days of week is provided, then the action happens only on the specified day(s).

If no days are specified, the action is assumed to happen every day as otherwise specified.

Specified time of day for action to take place.

When time of day is specified, it is inferred that the action happens every day (as filtered by dayofWeek) on the specified times. If there's a timeOfDay, there cannot be a when, or vice versa.

An approximate time period during the day, potentially linked to an event of daily living that indicates when the action should occur.

When more than one event is listed, the event is tied to the union of the specified events.

Timings are frequently determined by occurrences such as waking, eating and sleep.

A code for the timing schedule (or just text in code.text). Some codes such as BID are ubiquitous, but many institutions define their own additional codes. If a code is provided, the code is understood to be a complete statement of whatever is specified in the structured timing data, and either the code or the data may be used to interpret the Timing, with the exception that .repeat.bounds still applies over the code (and is not contained in the code).

BID etc. are defined as 'at institutionally specified times'. For example, an institution may choose that BID is "always at 7am and 6pm". If it is inappropriate for this choice to be made, the code BID should not be used. Instead, a distinct organization-specific code should be used in place of the HL7-defined BID code and/or a structured representation should be used (in this case, specifying the two event times).

How drug should enter body.

A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.

Depending on the resource,this is the amount of medication administered, to be administered or typical amount to be administered.

Amount of medication per dose.

Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

The amount of therapeutic or other substance given at one administration event.

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them Other type slices that contain no new information are not shown in this view

Amount of medication per dose.

Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

The amount of therapeutic or other substance given at one administration event.

The value of the measured amount. The value includes an implicit precision in the presentation of the value.

The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Precision is handled implicitly in almost all cases of measurement.

Not allowed to be used in this context

How the Quantity should be understood and represented.

Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

A human-readable form of the unit.

There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

A computer processable form of the unit in some unit representation system.

The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Indicates the specific details for the dispense or medication supply part of a medication request (also known as a Medication Prescription or Medication Order). Note that this information is not always sent with the order. There may be in some settings (e.g. hospitals) institutional or system support for completing the dispense details in the pharmacy department.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

This indicates the validity period of a prescription (stale dating the Prescription).

It reflects the prescribers' perspective for the validity of the prescription. Dispenses must not be made against the prescription outside of this period. The lower-bound of the Dispensing Window signifies the earliest date that the prescription can be filled for the first time. If an upper-bound is not specified then the Prescription is open-ended or will default to a stale-date based on regulations.

Indicates when the Prescription becomes valid, and when it ceases to be a dispensable Prescription.

The start of the period. The boundary is inclusive.

If the low element is missing, the meaning is that the low boundary is not known.

The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

The amount that is to be dispensed for one fill.

Indicates the intended performing Organization that will dispense the medication as specified by the prescriber.

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

An authorized representative is a person authorized to collect medications from the pharmacy on behalf of the patient based on a written prescription.

Reason for the current prescription status, entered by physicians or pharmacists in DMED

SHOULD BE USED:

• frequency should be used with period and periodUntil
• frequency should be used with timeOfDay SHOULD NOT BE USED:
• 'when' should not be used with 'timeOfDay'
• event should not be used with bounds[x]
• bounds[x] should not be used with count
• event should not be used with period and Frequency
• event should not be used with timeOfDay and DayOfWeek
• period should not be used if timeOfDay + Exact Times (Count)
• period should not be used if when + countMax
• period should not be used with boundsRange
• 'dayOfWeek' and 'periodUnit' should not be used together
• dayOfWeek and timeOfDay should not be used with count
• dayOfWeek should not be used with boundsRange
• frequency should not be used with count alone unless there is a cycle

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them Other type slices that contain no new information are not shown in this view

An order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

IETF language tag for a human language

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

An Extension

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

An authorized representative is a person authorized to collect medications from the pharmacy on behalf of the patient based on a written prescription.

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Identifiers associated with this medication request that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

This is a business identifier, not a resource identifier.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

The purpose of this identifier.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Allows users to make use of identifiers when the identifier system is not known.

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

Identifier.system is always case sensitive.

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Time period during which identifier is/was valid for use.

Organization that issued/manages the identifier.

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

A plan or request that is fulfilled in whole or in part by this medication request.

Reference to an order/prescription that is being replaced by this MedicationRequest.

A shared identifier common to multiple independent Request instances that were activated/authorized more or less simultaneously by a single author. The presence of the same identifier on each request ties those requests together and may have business ramifications in terms of reporting of results, billing, etc. E.g. a requisition number shared by a set of lab tests ordered together, or a prescription number shared by all meds ordered at one time.

Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation.

A code specifying the current state of the order. Generally, this will be active or completed state.

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Clinical decision support systems should take the status into account when determining which medications to include in their algorithms.

Reason for the current prescription status, entered by physicians or pharmacists in DMED

This is generally only used for "exception" statuses such as "suspended" or "cancelled". The reason why the MedicationRequest was created at all is captured in reasonCode, not here.

The date (and perhaps time) when the status was changed.

Whether the request is a proposal, plan, or an original order.

It is expected that the type of requester will be restricted for different stages of a MedicationRequest. For example, Proposals can be created by a patient, relatedPerson, Practitioner or Device. Plans can be created by Practitioners, Patients, RelatedPersons and Devices. Original orders can be created by a Practitioner only.

An instance-order is an instantiation of a request or order and may be used to populate Medication Administration Record.

This element is labeled as a modifier because the intent alters when and how the resource is actually applicable.

An arbitrary categorization or grouping of the medication request. It could be used for indicating where meds are intended to be administered, eg. in an inpatient setting or in a patient's home, or a legal category of the medication.

The category can be used to include where the medication is expected to be consumed or other types of requests. The examplar value set represents where the meds are intended to be administered and is just one example of request categorization.

Indicates how quickly the Medication Request should be addressed with respect to other requests.

Identifies the level of importance to be assigned to actioning the request.

If true, indicates that the provider is asking for the patient to either stop taking or to not start taking the specified medication. For example, the patient is taking an existing medication and the provider is changing their medication. They want to create two seperate requests: one to stop using the current medication and another to start the new medication.

If do not perform is not specified, the request is a positive request e.g. "do perform".

Identifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications.

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the Medication resource is recommended. For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource.

A coded concept identifying substance or product that can be ordered.

The individual or group for whom the medication has been requested.

The subject on a medication request is mandatory. For the secondary use case where the actual subject is not provided, there still must be an anonymized subject specified.

The person or organization who provided the information about this request, if the source is someone other than the requestor. This is often used when the MedicationRequest is reported by another person.

The Encounter during which this [x] was created or to which the creation of this record is tightly associated.

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter." If there is a need to link to episodes of care they will be handled with an extension.

Information to support fulfilling (i.e. dispensing or administering) of the medication, for example, patient height and weight, a MedicationStatement for the patient).

This attribute can be used to reference a MedicationStatement about the patients' medication use.

The date (and perhaps time) when the prescription was initially written or authored on.

The individual, organization, or device that initiated the request and has responsibility for its activation.

Indicates if this record was captured as a secondary 'reported' record rather than as an original primary source-of-truth record. It may also indicate the source of the report.

If not populated, then assume that this is the original record and not reported

Indicates the type of performer of the administration of the medication.

If specified without indicating a performer, this indicates that the performer must be of the specified type. If specified with a performer then it indicates the requirements of the performer if the designated performer is not available.

Identifies the type of individual that is desired to administer the medication.

The specified desired performer of the medication treatment (e.g. the performer of the medication administration). For devices, this is the device that is intended to perform the administration of the medication. An IV Pump would be an example of a device that is performing the administration. Both the IV Pump and the practitioner that set the rate or bolus on the pump can be listed as performers.

The intended type of device that is to be used for the administration of the medication (for example, PCA Pump).

The person who entered the order on behalf of another individual for example in the case of a verbal or a telephone order.

The reason or the indication for ordering or not ordering the medication.

This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonReference.

The description of the overall pattern of the administration of the medication to the patient.

This attribute should not be confused with the protocol of the medication.

Identifies the overall pattern of medication administratio.

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be required for delivering the requested service.

Extra information about the prescription that could not be conveyed by the other attributes.

The full representation of the dose of the medication included in all dosage instructions. To be used when multiple dosage instructions are included to represent complex dosing such as increasing or tapering doses.

The content of the renderedDosageInstructions must not be different than the dose represented in the dosageInstruction content.

The period over which the medication is to be taken. Where there are multiple dosageInstruction lines (for example, tapering doses), this is the earliest date and the latest end date of the dosageInstructions.

Specific instructions for how the medication is to be used by the patient.

There are examples where a medication request may include the option of an oral dose or an Intravenous or Intramuscular dose. For example, "Ondansetron 8mg orally or IV twice a day as needed for nausea" or "Compazine® (prochlorperazine) 5-10mg PO or 25mg PR bid prn nausea or vomiting". In these cases, two medication requests would be created that could be grouped together. The decision on which dose and route of administration to use is based on the patient's condition at the time the dose is needed. In general, each prescribed drug will be a separate Medication Request.

When drug orders are grouped together at the time of order entry, but each of the drugs can be manipulated independently e.g. changing the status of one order to "completed" or "cancelled", changing another order status to "on-hold", the method to "group" all of the medication requests together is to use MedicationRequest.groupIdentifier element. All of the orders grouped together in this manner will have the same groupIdentifier, and separately, each order in the group may have a unique identifier.

There are cases that require grouping of Medication orders together when it is necessary to specify optionality e.g. order two drugs at one time, but stating either of these drugs may be used to treat the patient. The use of a RequestOrchestration should be used as a parent for the Medication orders that require this type of grouping. An example when it may be necessary to group medication orders together is when you specify timing relationships e.g. order drug "xyz" with dose 123, then taper the same drug to a different dose after some interval of time precedence: e.g. give drug "abc" followed by drug "def" e.g. give drug 30 minutes before some procedure was performed more generically this supports - hierarchical groups of actions, where each specific action references the action to be performed (in terms of a Request resource), and each group describes additional behavior, relationships, and applicable conditions between the actions in the overall group. Note that one should NOT use the List or Composition resource to accomplish the above requirements. You may use List or Composition for other business requirements, but not to address the specific requirements of grouping medication orders.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Indicates the order in which the dosage instructions should be applied or interpreted.

If the sequence number of multiple Dosages is the same, then it is implied that the instructions are to be treated as concurrent. If the sequence number is different, then the Dosages are intended to be sequential.

Free text dosage instructions e.g. SIG.

Free text dosage instructions can be used for cases where the instructions are too complex to code. The content of this attribute does not include the name or description of the medication. When coded instructions are present, the free text instructions may still be present for display to humans taking or administering the medication. It is expected that the text instructions will always be populated. If the dosage.timing attribute is also populated, then the dosage.text should reflect the same information as the timing. Additional information about administration or preparation of the medication should be included as text.

Supplemental instructions to the patient on how to take the medication (e.g. "with meals" or"take half to one hour before food") or warnings for the patient about the medication (e.g. "may cause drowsiness" or "avoid exposure of skin to direct sunlight or sunlamps").

Information about administration or preparation of the medication (e.g. "infuse as rapidly as possibly via intraperitoneal port" or take "immediately following drug x") should be populated in dosage.text.

A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery".

Additional instruction is intended to be coded, but where no code exists, the element could include text. For example, "Swallow with plenty of water" which might or might not be coded.

Instructions in terms that are understood by the patient or consumer.

SHOULD BE USED:

• frequency should be used with period and periodUntil
• frequency should be used with timeOfDay SHOULD NOT BE USED:
• 'when' should not be used with 'timeOfDay'
• event should not be used with bounds[x]
• bounds[x] should not be used with count
• event should not be used with period and Frequency
• event should not be used with timeOfDay and DayOfWeek
• period should not be used if timeOfDay + Exact Times (Count)
• period should not be used if when + countMax
• period should not be used with boundsRange
• 'dayOfWeek' and 'periodUnit' should not be used together
• dayOfWeek and timeOfDay should not be used with count
• dayOfWeek should not be used with boundsRange
• frequency should not be used with count alone unless there is a cycle

This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing.

The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Identifies specific times when the event occurs.

In a Medication Administration Record, for instance, you need to take a general specification, and turn it into a precise specification.

A set of rules that describe when the event is scheduled.