O‘zbekiston Raqamli sog‘liqni saqlash platformasi
0.13.0 - ci-build Uzbekistan bayroqcha

Uzbekistan Digital Health Platform, Ministry of Health of the Republic of Uzbekistan tomonidan e’lon qilingan. Ushbu qo‘llanma rasmiy nashr emas; u FHIR (HL7® FHIR® Standard) CI Build tomonidan yaratilgan 0.13.0 versiyasi uchun uzluksiz yig‘ma hisoblanadi. Ushbu versiya https://github.com/uzinfocom-org/digital-health-ig/ dagi joriy kontentga asoslangan va muntazam ravishda o‘zgarib turadi. Nashr etilgan versiyalar katalogini ko‘ring

Kengaytma: Group identifier - Batafsil ta’riflar

Draft 2026-11-17 holatiga ko‘ra

supplyrequest-group-identifier kengaytma uchun ta’riflar

Ushbu jadval mazmunini qanday talqin qilish bo‘yicha ko‘rsatmalarni bu yerdan topish mumkin bu yerda on how to interpret the contents of this table

0. Extension
Ta'rif

A shared identifier common to multiple independent supply requests that were activated or authorized more or less simultaneously by a single author. The same identifier on each request ties those requests together. Requests in the same group are generally treated independently when their state changes or they are maintained after creation. FHIR R5 SupplyRequest has no element for this: the extension pre-adopts SupplyRequest.groupIdentifier from the HL7 Orders and Observations incubator, until an official cross-version extension is published.


Optional Extension Element - found in all resources.

Qisqa tavsifGroup identifierOptional Extensions Element
Boshqaruv0..*
Modifikator hisoblanadifalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Ta'rif

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Qisqa tavsifExtensionAdditional content defined by implementations
Izohlar

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Boshqaruv0..0*
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Muqobil nomlarextensions, user content
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi Extension.extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
4. Extension.url
Ta'rif

Source of the definition for the extension code - a logical name or a URL.

Qisqa tavsifidentifies the meaning of the extension
Izohlar

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Boshqaruv1..1
Turiuri
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
Qat’iy belgilangan qiymat
{
  "url" : "https://dhp.uz/fhir/core/StructureDefinition/supplyrequest-group-identifier"
}
<url value="https://dhp.uz/fhir/core/StructureDefinition/supplyrequest-group-identifier"/>
6. Extension.value[x]
Ta'rif

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Qisqa tavsifValue of extension
Boshqaruv10..1
Ushbu element quyidagi invariantlar ta’sirida: ext-1
TuriIdentifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Ushbu jadval mazmunini qanday talqin qilish bo‘yicha ko‘rsatmalarni bu yerdan topish mumkin bu yerda on how to interpret the contents of this table

0. Extension
Ta'rif

A shared identifier common to multiple independent supply requests that were activated or authorized more or less simultaneously by a single author. The same identifier on each request ties those requests together. Requests in the same group are generally treated independently when their state changes or they are maintained after creation. FHIR R5 SupplyRequest has no element for this: the extension pre-adopts SupplyRequest.groupIdentifier from the HL7 Orders and Observations incubator, until an official cross-version extension is published.

Qisqa tavsifGroup identifier
2. Extension.extension
Boshqaruv0..0
4. Extension.url
Qat’iy belgilangan qiymat
{
  "url" : "https://dhp.uz/fhir/core/StructureDefinition/supplyrequest-group-identifier"
}
<url value="https://dhp.uz/fhir/core/StructureDefinition/supplyrequest-group-identifier"/>
6. Extension.value[x]
Boshqaruv1..?
TuriIdentifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun

Ushbu jadval mazmunini qanday talqin qilish bo‘yicha ko‘rsatmalarni bu yerdan topish mumkin bu yerda on how to interpret the contents of this table

0. Extension
Ta'rif

A shared identifier common to multiple independent supply requests that were activated or authorized more or less simultaneously by a single author. The same identifier on each request ties those requests together. Requests in the same group are generally treated independently when their state changes or they are maintained after creation. FHIR R5 SupplyRequest has no element for this: the extension pre-adopts SupplyRequest.groupIdentifier from the HL7 Orders and Observations incubator, until an official cross-version extension is published.

Qisqa tavsifGroup identifier
Boshqaruv0..*
Modifikator hisoblanadifalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.id
Ta'rif

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Qisqa tavsifUnique id for inter-element referencing
Boshqaruv0..1
Ushbu element quyidagi invariantlar ta’sirida: ele-1
Turiid
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
4. Extension.extension
Ta'rif

An Extension

Qisqa tavsifExtension
Boshqaruv0..0
TuriExtension
Modifikator hisoblanadifalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingUshbu element quyidagi slices to‘plamini belgilaydi Extension.extension. Slices quyidagicha: Tartibsiz va Open, va quyidagi diskriminatorlar yordamida farqlanishi mumkin:
  • value @ url
6. Extension.url
Ta'rif

Source of the definition for the extension code - a logical name or a URL.

Qisqa tavsifidentifies the meaning of the extension
Izohlar

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Boshqaruv1..1
Turiuri
Modifikator hisoblanadifalse
XML FormatXML formatida ushbu xususiyat atribut sifatida ifodalanadi.
Xulosafalse
Qat’iy belgilangan qiymat
{
  "url" : "https://dhp.uz/fhir/core/StructureDefinition/supplyrequest-group-identifier"
}
<url value="https://dhp.uz/fhir/core/StructureDefinition/supplyrequest-group-identifier"/>
8. Extension.value[x]
Ta'rif

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Qisqa tavsifValue of extension
Boshqaruv1..1
Ushbu element quyidagi invariantlar ta’sirida: ext-1
TuriIdentifier
[x] IzohQarangMa’lumot turlari tanlovi[x] dan foydalanish bo‘yicha qo‘shimcha ma’lumot uchun
Modifikator hisoblanadifalse
Xulosafalse
Invariantlarele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))