CH ORF (R4)
4.0.0-ballot-ci-build - ci-build Switzerland flag

CH ORF (R4), published by HL7 Switzerland. This guide is not an authorized publication; it is the continuous build for version 4.0.0-ballot-ci-build built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/hl7ch/ch-orf/ and changes regularly. See the Directory of published versions

Resource Profile: ChOrfConsent - Detailed Descriptions

Active as of 2024-12-18

Definitions for the ch-orf-consent resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Consent
ShortCH ORF Consent
2. Consent.extension
SlicingThis element introduces a set of slices on Consent.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Consent.extension:consentCode
    Slice NameconsentCode
    Control0..1
    TypeExtension(CH ORF Consent Code) (Extension Type: Coding)
    Must Supporttrue
    6. Consent.extension:consentNote
    Slice NameconsentNote
    Control0..1
    TypeExtension(CH ORF Consent Note) (Extension Type: string)
    Must Supporttrue
    8. Consent.status
    Pattern Valueactive
    10. Consent.scope
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
        "code" : "patient-privacy"
      }]
    }
    12. Consent.category
    Pattern Value{
      "coding" : [{
        "system" : "http://loinc.org",
        "code" : "59284-0"
      }]
    }
    14. Consent.policyRule
    ShortElement required due to rule 'ppc-1'. Because it is not applicable in the context of CH ORF, a data absent reason is given.
    16. Consent.policyRule.extension
    Control1..?
    18. Consent.policyRule.extension:data-absent-reason
    Slice Namedata-absent-reason
    Control1..1
    TypeExtension(Data Absent Reason) (Extension Type: code)
    20. Consent.policyRule.extension:data-absent-reason.value[x]
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Pattern Valuenot-applicable

    Guidance on how to interpret the contents of this table can be found here

    0. Consent
    Definition

    A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time.

    ShortCH ORF ConsentA healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time
    Comments

    Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
    ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
    ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
    ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
    ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
    ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
    ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
    ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
    ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
    ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
    2. Consent.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Consent.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Consent.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 6. Consent.extension:consentCode
      Slice NameconsentCode
      Definition

      Consent Code

      ShortCH ORF Consent Code
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CH ORF Consent Code) (Extension Type: Coding)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      8. Consent.extension:consentNote
      Slice NameconsentNote
      Definition

      Consent Note

      ShortCH ORF Consent Note
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CH ORF Consent Note) (Extension Type: string)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      10. Consent.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      12. Consent.status
      Definition

      Indicates the current state of this consent.

      Shortdraft | proposed | active | rejected | inactive | entered-in-error
      Comments

      This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from ConsentStatehttp://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1
      (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

      Indicates the state of the consent.

      Typecode
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

      Pattern Valueactive
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Consent.scope
      Definition

      A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

      ShortWhich of the four areas this resource covers (extensible)
      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodeshttp://hl7.org/fhir/ValueSet/consent-scope
      (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

      The four anticipated uses for the Consent Resource.

      TypeCodeableConcept
      Is Modifiertrue because Allows changes to codes based on scope selection
      Summarytrue
      Pattern Value{
        "coding" : [{
          "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
          "code" : "patient-privacy"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Consent.category
      Definition

      A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

      ShortClassification of the consent statement - for indexing/retrieval
      Control1..*
      BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodeshttp://hl7.org/fhir/ValueSet/consent-category
      (extensible to http://hl7.org/fhir/ValueSet/consent-category)

      A classification of the type of consents found in a consent statement.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Pattern Value{
        "coding" : [{
          "system" : "http://loinc.org",
          "code" : "59284-0"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Consent.policyRule
      Definition

      A reference to the specific base computable regulation or policy.

      ShortElement required due to rule 'ppc-1'. Because it is not applicable in the context of CH ORF, a data absent reason is given.Regulation that this consents to
      Comments

      If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource.

      Control0..1
      This element is affected by the following invariants: ppc-1
      BindingUnless not suitable, these codes SHALL be taken from ConsentPolicyRuleCodeshttp://hl7.org/fhir/ValueSet/consent-policy
      (extensible to http://hl7.org/fhir/ValueSet/consent-policy)

      Regulatory policy examples.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Requirements

      Might be a unique identifier of a policy set in XACML, or other rules engine.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Consent.policyRule.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control10..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Consent.policyRule.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 22. Consent.policyRule.extension:data-absent-reason
        Slice Namedata-absent-reason
        Definition

        Provides a reason why the expected value or elements in the element that is extended are missing.

        Shortunknown | asked | temp | notasked | masked | unsupported | astext | error
        Control1..1
        TypeExtension(Data Absent Reason) (Extension Type: code)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        24. Consent.policyRule.extension:data-absent-reason.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..0*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Consent.policyRule.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 26. Consent.policyRule.extension:data-absent-reason.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          Fixed Valuehttp://hl7.org/fhir/StructureDefinition/data-absent-reason
          28. Consent.policyRule.extension:data-absent-reason.value[x]
          Definition

          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

          ShortValue of extension
          Control10..1
          This element is affected by the following invariants: ext-1
          BindingThe codes SHALL be taken from For codes, see DataAbsentReason
          (required to http://hl7.org/fhir/ValueSet/data-absent-reason)
          Typecode, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Pattern Valuenot-applicable
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

          Guidance on how to interpret the contents of this table can be found here

          0. Consent
          Definition

          A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time.

          ShortCH ORF Consent
          Comments

          Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

          Control0..*
          Is Modifierfalse
          Summaryfalse
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
          ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
          ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
          ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
          ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
          2. Consent.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Is Modifierfalse
          Summarytrue
          4. Consent.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. Consent.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. Consent.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHOULD be taken from CommonLanguages
          (preferred to http://hl7.org/fhir/ValueSet/languages)

          A human language.

          Additional BindingsPurpose
          AllLanguagesMax Binding
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. Consent.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          TypeNarrative
          Is Modifierfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. Consent.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

          Control0..*
          TypeResource
          Is Modifierfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. Consent.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Consent.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. Consent.extension:consentCode
            Slice NameconsentCode
            Definition

            Consent Code

            ShortCH ORF Consent Code
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(CH ORF Consent Code) (Extension Type: Coding)
            Is Modifierfalse
            Must Supporttrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. Consent.extension:consentNote
            Slice NameconsentNote
            Definition

            Consent Note

            ShortCH ORF Consent Note
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(CH ORF Consent Note) (Extension Type: string)
            Is Modifierfalse
            Must Supporttrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. Consent.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Summaryfalse
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            22. Consent.identifier
            Definition

            Unique identifier for this copy of the Consent Statement.

            ShortIdentifier for this record (external references)
            Comments

            This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Summarytrue
            Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. Consent.status
            Definition

            Indicates the current state of this consent.

            Shortdraft | proposed | active | rejected | inactive | entered-in-error
            Comments

            This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

            Control1..1
            BindingThe codes SHALL be taken from ConsentState
            (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

            Indicates the state of the consent.

            Typecode
            Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

            Pattern Valueactive
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. Consent.scope
            Definition

            A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

            ShortWhich of the four areas this resource covers (extensible)
            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodes
            (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

            The four anticipated uses for the Consent Resource.

            TypeCodeableConcept
            Is Modifiertrue because Allows changes to codes based on scope selection
            Summarytrue
            Pattern Value{
              "coding" : [{
                "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
                "code" : "patient-privacy"
              }]
            }
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            28. Consent.category
            Definition

            A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

            ShortClassification of the consent statement - for indexing/retrieval
            Control1..*
            BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodes
            (extensible to http://hl7.org/fhir/ValueSet/consent-category)

            A classification of the type of consents found in a consent statement.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Pattern Value{
              "coding" : [{
                "system" : "http://loinc.org",
                "code" : "59284-0"
              }]
            }
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. Consent.patient
            Definition

            The patient/healthcare consumer to whom this consent applies.

            ShortWho the consent applies to
            Comments

            Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

            Control0..1
            TypeReference(Patient)
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            32. Consent.dateTime
            Definition

            When this Consent was issued / created / indexed.

            ShortWhen this Consent was created or indexed
            Comments

            This is not the time of the original consent, but the time that this statement was made or derived.

            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            34. Consent.performer
            Definition

            Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions.

            ShortWho is agreeing to the policy and rules
            Comments

            Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian.

            Control0..*
            TypeReference(Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
            Is Modifierfalse
            Summarytrue
            Alternate Namesconsentor
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            36. Consent.organization
            Definition

            The organization that manages the consent, and the framework within which it is executed.

            ShortCustodian of the consent
            Control0..*
            TypeReference(Organization)
            Is Modifierfalse
            Summarytrue
            Alternate Namescustodian
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            38. Consent.source[x]
            Definition

            The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

            ShortSource from which this consent is taken
            Comments

            The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id.

            Control0..1
            TypeChoice of: Attachment, Reference(Consent, DocumentReference, Contract, QuestionnaireResponse)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            40. Consent.policy
            Definition

            The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

            ShortPolicies covered by this consent
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            42. Consent.policy.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            44. Consent.policy.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            46. Consent.policy.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            48. Consent.policy.authority
            Definition

            Entity or Organization having regulatory jurisdiction or accountability for enforcing policies pertaining to Consent Directives.

            ShortEnforcement source for policy
            Control0..1
            This element is affected by the following invariants: ppc-1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            50. Consent.policy.uri
            Definition

            The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

            ShortSpecific policy covered by this consent
            Comments

            This element is for discoverability / documentation and does not modify or qualify the policy rules.

            Control0..1
            This element is affected by the following invariants: ppc-1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            52. Consent.policyRule
            Definition

            A reference to the specific base computable regulation or policy.

            ShortElement required due to rule 'ppc-1'. Because it is not applicable in the context of CH ORF, a data absent reason is given.
            Comments

            If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource.

            Control0..1
            This element is affected by the following invariants: ppc-1
            BindingUnless not suitable, these codes SHALL be taken from ConsentPolicyRuleCodes
            (extensible to http://hl7.org/fhir/ValueSet/consent-policy)

            Regulatory policy examples.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Requirements

            Might be a unique identifier of a policy set in XACML, or other rules engine.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. Consent.policyRule.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            56. Consent.policyRule.extension
            Definition

            An Extension

            ShortExtension
            Control1..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Consent.policyRule.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 58. Consent.policyRule.extension:data-absent-reason
              Slice Namedata-absent-reason
              Definition

              Provides a reason why the expected value or elements in the element that is extended are missing.

              Shortunknown | asked | temp | notasked | masked | unsupported | astext | error
              Control1..1
              TypeExtension(Data Absent Reason) (Extension Type: code)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              60. Consent.policyRule.extension:data-absent-reason.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              This element is affected by the following invariants: ele-1
              Typeid
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              62. Consent.policyRule.extension:data-absent-reason.extension
              Definition

              An Extension

              ShortExtension
              Control0..0
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Consent.policyRule.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 64. Consent.policyRule.extension:data-absent-reason.url
                Definition

                Source of the definition for the extension code - a logical name or a URL.

                Shortidentifies the meaning of the extension
                Comments

                The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                Control1..1
                Typeuri
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                Fixed Valuehttp://hl7.org/fhir/StructureDefinition/data-absent-reason
                66. Consent.policyRule.extension:data-absent-reason.value[x]
                Definition

                Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                ShortValue of extension
                Control1..1
                This element is affected by the following invariants: ext-1
                BindingThe codes SHALL be taken from DataAbsentReason
                (required to http://hl7.org/fhir/ValueSet/data-absent-reason)
                Typecode
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Pattern Valuenot-applicable
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                68. Consent.policyRule.coding
                Definition

                A reference to a code defined by a terminology system.

                ShortCode defined by a terminology system
                Comments

                Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                Control0..*
                TypeCoding
                Is Modifierfalse
                Summarytrue
                Requirements

                Allows for alternative encodings within a code system, and translations to other code systems.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                70. Consent.policyRule.text
                Definition

                A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                ShortPlain text representation of the concept
                Comments

                Very often the text is the same as a displayName of one of the codings.

                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                72. Consent.verification
                Definition

                Whether a treatment instruction (e.g. artificial respiration yes or no) was verified with the patient, his/her family or another authorized person.

                ShortConsent Verified by patient or family
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                74. Consent.verification.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                76. Consent.verification.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                78. Consent.verification.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                80. Consent.verification.verified
                Definition

                Has the instruction been verified.

                ShortHas been verified
                Control1..1
                Typeboolean
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                82. Consent.verification.verifiedWith
                Definition

                Who verified the instruction (Patient, Relative or other Authorized Person).

                ShortPerson who verified
                Control0..1
                TypeReference(Patient, RelatedPerson)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                84. Consent.verification.verificationDate
                Definition

                Date verification was collected.

                ShortWhen consent verified
                Control0..1
                TypedateTime
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                86. Consent.provision
                Definition

                An exception to the base policy of this consent. An exception can be an addition or removal of access permissions.

                ShortConstraints to the base Consent.policyRule
                Control0..1
                TypeBackboneElement
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                88. Consent.provision.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                90. Consent.provision.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                92. Consent.provision.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                94. Consent.provision.type
                Definition

                Action to take - permit or deny - when the rule conditions are met. Not permitted in root rule, required in all nested rules.

                Shortdeny | permit
                Control0..1
                BindingThe codes SHALL be taken from ConsentProvisionType
                (required to http://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1)

                How a rule statement is applied, such as adding additional consent or removing consent.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                96. Consent.provision.period
                Definition

                The timeframe in this rule is valid.

                ShortTimeframe for this rule
                Control0..1
                TypePeriod
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                98. Consent.provision.actor
                Definition

                Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                ShortWho|what controlled by this rule (or group, by role)
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Meaning if MissingThere is no specific actor associated with the exception
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                100. Consent.provision.actor.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                102. Consent.provision.actor.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                104. Consent.provision.actor.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                106. Consent.provision.actor.role
                Definition

                How the individual is involved in the resources content that is described in the exception.

                ShortHow the actor is involved
                Control1..1
                BindingUnless not suitable, these codes SHALL be taken from SecurityRoleType
                (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

                How an actor is involved in the consent considerations.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                108. Consent.provision.actor.reference
                Definition

                The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                ShortResource for the actor (or group, by role)
                Control1..1
                TypeReference(Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                110. Consent.provision.action
                Definition

                Actions controlled by this Rule.

                ShortActions controlled by this rule
                Comments

                Note that this is the direct action (not the grounds for the action covered in the purpose element). At present, the only action in the understood and tested scope of this resource is 'read'.

                Control0..*
                BindingFor example codes, see ConsentActionCodes
                (example to http://hl7.org/fhir/ValueSet/consent-action)

                Detailed codes for the consent action.

                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Meaning if Missingall actions
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                112. Consent.provision.securityLabel
                Definition

                A security label, comprised of 0..* security label fields (Privacy tags), which define which resources are controlled by this exception.

                ShortSecurity Labels that define affected resources
                Comments

                If the consent specifies a security label of "R" then it applies to all resources that are labeled "R" or lower. E.g. for Confidentiality, it's a high water mark. For other kinds of security labels, subsumption logic applies. When the purpose of use tag is on the data, access request purpose of use shall not conflict.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from All Security Labels
                (extensible to http://hl7.org/fhir/ValueSet/security-labels)

                Security Labels from the Healthcare Privacy and Security Classification System.

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                114. Consent.provision.purpose
                Definition

                The context of the activities a user is taking - why the user is accessing the data - that are controlled by this rule.

                ShortContext of activities covered by this rule
                Comments

                When the purpose of use tag is on the data, access request purpose of use shall not conflict.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from PurposeOfUse
                (extensible to http://terminology.hl7.org/ValueSet/v3-PurposeOfUse)

                What purposes of use are controlled by this exception. If more than one label is specified, operations must have all the specified labels.

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                116. Consent.provision.class
                Definition

                The class of information covered by this rule. The type can be a FHIR resource type, a profile on a type, or a CDA document, or some other type that indicates what sort of information the consent relates to.

                Shorte.g. Resource Type, Profile, CDA, etc.
                Comments

                Multiple types are or'ed together. The intention of the contentType element is that the codes refer to profiles or document types defined in a standard or an implementation guide somewhere.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from ConsentContentClass
                (extensible to http://hl7.org/fhir/ValueSet/consent-content-class)

                The class (type) of information a consent rule covers.

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                118. Consent.provision.code
                Definition

                If this code is found in an instance, then the rule applies.

                Shorte.g. LOINC or SNOMED CT code, etc. in the content
                Comments

                Typical use of this is a Document code with class = CDA.

                Control0..*
                BindingFor example codes, see ConsentContentCodes
                (example to http://hl7.org/fhir/ValueSet/consent-content-code)

                If this code is found in an instance, then the exception applies.

                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                120. Consent.provision.dataPeriod
                Definition

                Clinical or Operational Relevant period of time that bounds the data controlled by this rule.

                ShortTimeframe for data controlled by this rule
                Comments

                This has a different sense to the Consent.period - that is when the consent agreement holds. This is the time period of the data that is controlled by the agreement.

                Control0..1
                TypePeriod
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                122. Consent.provision.data
                Definition

                The resources controlled by this rule if specific resources are referenced.

                ShortData controlled by this rule
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summarytrue
                Meaning if Missingall data
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                124. Consent.provision.data.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                126. Consent.provision.data.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                128. Consent.provision.data.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                130. Consent.provision.data.meaning
                Definition

                How the resource reference is interpreted when testing consent restrictions.

                Shortinstance | related | dependents | authoredby
                Control1..1
                BindingThe codes SHALL be taken from ConsentDataMeaning
                (required to http://hl7.org/fhir/ValueSet/consent-data-meaning|4.0.1)

                How a resource reference is interpreted when testing consent restrictions.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                132. Consent.provision.data.reference
                Definition

                A reference to a specific resource that defines which resources are covered by this consent.

                ShortThe actual data reference
                Control1..1
                TypeReference(Resource)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                134. Consent.provision.provision
                Definition

                Rules which provide exceptions to the base rule or subrules.

                ShortNested Exception Rules
                Control0..*
                TypeSeettp://hl7.org/fhir/StructureDefinition/Consent#Consent.provision
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))