PanCareSurPass Project HL7 FHIR Implementation Guide
1.0.0 - release 150

PanCareSurPass Project HL7 FHIR Implementation Guide, published by PanCareSurPass Project. This guide is not an authorized publication; it is the continuous build for version 1.0.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/hl7-eu/pcsp/ and changes regularly. See the Directory of published versions

Resource Profile: PatientPcsp - Detailed Descriptions

Active as of 2025-10-16

Definitions for the Patient-eu-pcsp resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Patient
Definition

Information about an individual receiving health care services


Demographics and other administrative information about an individual or animal receiving care or other health-related services.

ShortInformation about an individual receiving health care servicesInformation about an individual or animal receiving health care services
Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesSubjectOfCare Client Resident
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Patient.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Patient.extension:genderIdentity
Slice NamegenderIdentity
Definition

An individual's personal sense of being a man, woman, boy, girl, nonbinary, or something else.

ShortThe individual's gender identity
Comments

This represents an individual’s identity, ascertained by asking them what that identity is.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(http://hl7.org/fhir/StructureDefinition/individual-genderIdentity|5.3.0-ballot-tc1)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Patient.extension:personalPronouns
Slice NamepersonalPronouns
Definition

The pronouns to use when referring to an individual in verbal or written communication.

ShortThe pronouns to use when communicating about an individual.
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(http://hl7.org/fhir/StructureDefinition/individual-pronouns|5.3.0-ballot-tc1)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Patient.extension:patient-birthPlace
Slice Namepatient-birthPlace
Definition

The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

ShortPlace of Birth for patient
Control0..1
TypeExtension(Patient Birth Place) (Extension Type: Address)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Patient.extension:patient-mothersMaidenName
Slice Namepatient-mothersMaidenName
Definition

Mother's maiden (unmarried) name, commonly collected to help verify patient identity.

ShortMother's Maiden name
Control0..1
TypeExtension(Patient Mother's Maiden Name) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Patient.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Patient.identifier
Definition

An identifier for this patient.

ShortAn identifier for this patient
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Obligations
    ObligationsActorSource
    SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
    SHALL:handleConsumer (IPS)from Patient (IPS)
    SHOULD:displayConsumer (IPS)from Patient (IPS)
    Summarytrue
    Requirements

    Patients are almost always assigned specific numerical identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Patient.active
    Definition

    Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

    It is often used to filter patient lists to exclude inactive patients

    Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

    ShortWhether this patient's record is in active use
    Comments

    If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

    Control0..1
    Typeboolean
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to be able to mark a patient record as not to be used because it was created in error.

    Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Patient.name
    Definition

    A name associated with the individual.

    ShortA name associated with the patient
    Comments

    A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

    Control10..*
    TypeHumanName
    Is Modifierfalse
    Must Supporttrue
    Obligations
      ObligationsActorSource
      SHALL:populateCreator (IPS)from Patient (IPS)
      SHALL:handleConsumer (IPS)from Patient (IPS)
      SHOULD:displayConsumer (IPS)from Patient (IPS)
      Summarytrue
      Requirements

      Need to be able to track the patient by multiple names. Examples are your official name and a partner name. The Alphabetic representation of the name SHALL be always provided


      Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ips-pat-1: Patient.name.given, Patient.name.family or Patient.name.text SHALL be present (family.exists() or given.exists() or text.exists())
      20. Patient.name.use
      Definition

      Identifies the purpose for this name.

      Shortusual | official | temp | nickname | anonymous | old | maiden
      Comments

      Applications can assume that a name is current unless it explicitly says that it is temporary or old.

      Control0..1
      BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

      The use of a human name.

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Obligations
        ObligationsActorSource
        SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
        SHALL:handleConsumer (IPS)from Patient (IPS)
        SHOULD:displayConsumer (IPS)from Patient (IPS)
        Summarytrue
        Requirements

        Allows the appropriate name for a particular context of use to be selected from among a set of names.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Patient.name.text
        Definition

        Text representation of the full name. Due to the cultural variance around the world a consuming system may not know how to present the name correctly; moreover, not all the parts of the name go in given or family. Creators are therefore strongly encouraged to provide through this element a presented version of the name. Future versions of this guide may require this element


        Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

        ShortText representation of the full name
        Comments

        Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Obligations
          ObligationsActorSource
          SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
          SHALL:handleConsumer (IPS)from Patient (IPS)
          SHOULD:displayConsumer (IPS)from Patient (IPS)
          Summarytrue
          Requirements

          A renderable, unencoded form.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          24. Patient.name.family
          Definition

          The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

          ShortFamily name (often called 'Surname')
          Comments

          Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

          Control10..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Obligations
            ObligationsActorSource
            SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
            SHALL:handleConsumer (IPS)from Patient (IPS)
            SHOULD:displayConsumer (IPS)from Patient (IPS)
            Summarytrue
            Alternate Namessurname
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. Patient.name.given
            Definition

            Given name.

            ShortGiven names (not always 'first'). Includes middle names
            Comments

            If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

            Control10..*
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Obligations
              ObligationsActorSource
              SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
              SHALL:handleConsumer (IPS)from Patient (IPS)
              SHOULD:displayConsumer (IPS)from Patient (IPS)
              Summarytrue
              Alternate Namesfirst name, middle name
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              28. Patient.telecom
              Definition

              A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

              ShortA contact detail for the individual
              Comments

              A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

              Control0..*
              TypeContactPoint
              Is Modifierfalse
              Must Supporttrue
              Obligations
                ObligationsActorSource
                SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                SHALL:handleConsumer (IPS)from Patient (IPS)
                SHOULD:displayConsumer (IPS)from Patient (IPS)
                Summarytrue
                Requirements

                People have (primary) ways to contact them in some way such as phone, email.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                30. Patient.gender
                Definition

                Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

                Shortmale | female | other | unknown
                Comments

                The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

                Control10..1
                BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
                (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                The gender of a person used for administrative purposes.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Obligations
                  ObligationsActorSource
                  SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                  SHALL:handleConsumer (IPS)from Patient (IPS)
                  SHOULD:displayConsumer (IPS)from Patient (IPS)
                  Summarytrue
                  Requirements

                  Needed for identification of the individual, in combination with (at least) name and birth date.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  32. Patient.gender.extension
                  Definition

                  An Extension


                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortExtensionAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Patient.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 34. Patient.gender.extension:originalText
                    Slice NameoriginalText
                    Definition

                    A human language representation of the concept (resource/element) as seen/selected/uttered by the user who entered the data and/or which represents the full intended meaning of the user. This can be provided either directly as text, or as a url that is a reference to a portion of the narrative of a resource (DomainResource.text or Composition.section.text). When it a url, the value should end with a #{id} where the id identifies a specific portion of the referenced content (via an XHTML id attribute).

                    ShortOriginal Text that represents the data as seen/selected/uttered originally
                    Comments

                    The data in the element does not always capture the correct meaning with all the nuances of the original text. In these cases, the text is used to capture the full meaning of the source. This is commonly used to provide "what did the user actually see/type". Note that this extension has the same definition as CodeableConcept.text and SHALL NOT be used on CodeableConcept with type = string in place of CodeableConcept.text but MAY be used with type url. If present on a CodeableConcept with type url as well as CodeableConcept.text, then the CodeableConcept.text SHALL match the referenced narrative.

                    It's also possible to link to the resource narrative using the narrativeLink extension which does not claim that the data is derived from the text.

                    Control0..1
                    TypeExtension(Original Text) (Extension Type: Choice of: string, url)
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    36. Patient.birthDate
                    Definition

                    The date of birth for the individual.

                    ShortThe date of birth for the individual
                    Comments

                    At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

                    Control10..1
                    Typedate
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Obligations
                      ObligationsActorSource
                      SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                      SHALL:handleConsumer (IPS)from Patient (IPS)
                      SHOULD:displayConsumer (IPS)from Patient (IPS)
                      Summarytrue
                      Requirements

                      Age of the individual drives many clinical processes.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      LOINC Code21112-8
                      38. Patient.deceased[x]
                      Definition

                      Indicates if the individual is deceased or not.

                      ShortIndicates if the individual is deceased or not
                      Comments

                      If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                      Control0..1
                      TypeChoice of: boolean, dateTime
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      40. Patient.address
                      Definition

                      An address for the individual.

                      ShortAn address for the individual
                      Comments

                      Patient may have multiple addresses with different uses or applicable periods.

                      Control0..*
                      TypeAddress
                      Is Modifierfalse
                      Must Supporttrue
                      Obligations
                        ObligationsActorSource
                        SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                        SHALL:handleConsumer (IPS)from Patient (IPS)
                        SHOULD:displayConsumer (IPS)from Patient (IPS)
                        Summarytrue
                        Requirements

                        May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        42. Patient.contact
                        Definition

                        A contact party (e.g. guardian, partner, friend) for the patient.

                        ShortA contact party (e.g. guardian, partner, friend) for the patient
                        Comments

                        Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

                        Control0..*
                        TypeBackboneElement
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        Need to track people you can contact about the patient.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
                        pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
                        44. Patient.contact.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        46. Patient.contact.telecom
                        Definition

                        A contact detail for the person, e.g. a telephone number or an email address.

                        ShortA contact detail for the person
                        Comments

                        Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

                        Control10..*
                        TypeContactPoint
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        People have (primary) ways to contact them in some way such as phone, email.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        48. Patient.generalPractitioner
                        Definition

                        Patient's nominated care provider.

                        ShortPatient's nominated primary care provider
                        Comments

                        This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

                        Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

                        Control0..*
                        TypeReference(Organization, Practitioner, PractitionerRole)
                        Is Modifierfalse
                        Must Supporttrue
                        Must Support TypesNo must-support rules about the choice of types/profiles
                        Obligations
                          ObligationsActorSource
                          SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                          SHALL:handleConsumer (IPS)from Patient (IPS)
                          SHOULD:displayConsumer (IPS)from Patient (IPS)
                          Summaryfalse
                          Alternate NamescareProvider
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          SlicingThis element introduces a set of slices on Patient.generalPractitioner. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • type @ resolve()
                          • 50. Patient.generalPractitioner:primaryTreatmentCenter
                            Slice NameprimaryTreatmentCenter
                            Definition

                            Report here the institution in which most of the treatment was given


                            Patient's nominated care provider.

                            ShortPrimary treatment centerPatient's nominated primary care provider
                            Comments

                            This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

                            Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

                            Control0..1*
                            TypeReference(Organization: Primary Treatment Center / Center of diagnosis, Organization, Organization, Practitioner, PractitionerRole)
                            Is Modifierfalse
                            Must Supporttrue
                            Must Support TypesNo must-support rules about the choice of types/profiles
                            Obligations
                              ObligationsActorSource
                              SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                              SHALL:handleConsumer (IPS)from Patient (IPS)
                              SHOULD:displayConsumer (IPS)from Patient (IPS)
                              Summaryfalse
                              Alternate NamescareProvider
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              52. Patient.generalPractitioner:primaryTreatmentCenter.identifier
                              Definition

                              An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                              ShortBusiness identifier of the Primary treatment centerLogical reference, when literal reference is not known
                              Comments

                              When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                              When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                              Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                              Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                              NoteThis is a business identifier, not a resource identifier (see discussion)
                              Control0..1
                              TypeIdentifier
                              Is Modifierfalse
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              54. Patient.generalPractitioner:primaryTreatmentCenter.display
                              Definition

                              Plain text narrative that identifies the resource in addition to the resource reference.

                              ShortShort textual description of the Primary treatment centerText alternative for the resource
                              Comments

                              This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              56. Patient.link
                              Definition

                              Link to another patient resource that concerns the same actual patient.

                              ShortLink to another patient resource that concerns the same actual person
                              Comments

                              There is no assumption that linked patient records have mutual links.

                              Control0..*
                              TypeBackboneElement
                              Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
                              Summarytrue
                              Requirements

                              There are multiple use cases:

                              • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
                              • Distribution of patient information across multiple servers.
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              58. Patient.link.modifierExtension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                              ShortExtensions that cannot be ignored even if unrecognized
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                              Summarytrue
                              Requirements

                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                              Alternate Namesextensions, user content, modifiers
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              60. Patient.link.other
                              Definition

                              The other patient resource that the link refers to.

                              ShortThe other patient or related person resource that the link refers to
                              Comments

                              Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

                              Control1..1
                              TypeReference(Patient, RelatedPerson)
                              Is Modifierfalse
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              62. Patient.link.type
                              Definition

                              The type of link between this patient resource and another patient resource.

                              Shortreplaced-by | replaces | refer | seealso
                              Control1..1
                              BindingThe codes SHALL be taken from LinkTypehttp://hl7.org/fhir/ValueSet/link-type|4.0.1
                              (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

                              The type of link between this patient resource and another patient resource.

                              Typecode
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                              Guidance on how to interpret the contents of this table can be foundhere

                              0. Patient
                              Definition

                              Information about an individual receiving health care services

                              ShortInformation about an individual receiving health care services
                              2. Patient.extension:patient-birthPlace
                              Slice Namepatient-birthPlace
                              Control0..1
                              TypeExtension(Patient Birth Place) (Extension Type: Address)
                              4. Patient.extension:patient-mothersMaidenName
                              Slice Namepatient-mothersMaidenName
                              Control0..1
                              TypeExtension(Patient Mother's Maiden Name) (Extension Type: string)
                              6. Patient.identifier
                              NoteThis is a business identifier, not a resource identifier (see discussion)
                              Control1..?
                              8. Patient.name
                              10. Patient.name.family
                              Control1..?
                              12. Patient.name.given
                              Control1..?
                              14. Patient.gender
                              Control1..?
                              16. Patient.gender.extension
                              SlicingThis element introduces a set of slices on Patient.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 18. Patient.gender.extension:originalText
                                Slice NameoriginalText
                                Control0..1
                                TypeExtension(Original Text) (Extension Type: Choice of: string, url)
                                20. Patient.contact
                                22. Patient.contact.telecom
                                Control1..?
                                Must Supporttrue
                                24. Patient.generalPractitioner
                                SlicingThis element introduces a set of slices on Patient.generalPractitioner. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • type @ resolve()
                                • 26. Patient.generalPractitioner:primaryTreatmentCenter
                                  Slice NameprimaryTreatmentCenter
                                  Definition

                                  Report here the institution in which most of the treatment was given

                                  ShortPrimary treatment center
                                  Control0..1
                                  TypeReference(Organization: Primary Treatment Center / Center of diagnosis, Organization)
                                  Must Supporttrue
                                  Must Support TypesNo must-support rules about the choice of types/profiles
                                  28. Patient.generalPractitioner:primaryTreatmentCenter.identifier
                                  ShortBusiness identifier of the Primary treatment center
                                  NoteThis is a business identifier, not a resource identifier (see discussion)
                                  30. Patient.generalPractitioner:primaryTreatmentCenter.display
                                  ShortShort textual description of the Primary treatment center

                                  Guidance on how to interpret the contents of this table can be foundhere

                                  0. Patient
                                  Definition

                                  Information about an individual receiving health care services

                                  ShortInformation about an individual receiving health care services
                                  Control0..*
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate NamesSubjectOfCare Client Resident
                                  Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                                  dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                                  dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                                  dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                                  dom-6: A resource should have narrative for robust management (text.`div`.exists())
                                  2. Patient.id
                                  Definition

                                  The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                                  ShortLogical id of this artifact
                                  Comments

                                  The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                                  Control0..1
                                  Typeid
                                  Is Modifierfalse
                                  Summarytrue
                                  4. Patient.meta
                                  Definition

                                  The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                                  ShortMetadata about the resource
                                  Control0..1
                                  TypeMeta
                                  Is Modifierfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  6. Patient.implicitRules
                                  Definition

                                  A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                                  ShortA set of rules under which this content was created
                                  Comments

                                  Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                                  Control0..1
                                  Typeuri
                                  Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  8. Patient.language
                                  Definition

                                  The base language in which the resource is written.

                                  ShortLanguage of the resource content
                                  Comments

                                  Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                                  Control0..1
                                  BindingThe codes SHOULD be taken from CommonLanguages
                                  (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

                                  A human language.

                                  Additional BindingsPurpose
                                  AllLanguagesMax Binding
                                  Typecode
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  10. Patient.text
                                  Definition

                                  A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                                  ShortText summary of the resource, for human interpretation
                                  Comments

                                  Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                                  Control0..1
                                  TypeNarrative
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesnarrative, html, xhtml, display
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  12. Patient.contained
                                  Definition

                                  These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                                  ShortContained, inline Resources
                                  Comments

                                  This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                                  Control0..*
                                  TypeResource
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesinline resources, anonymous resources, contained resources
                                  14. Patient.extension
                                  Definition

                                  An Extension

                                  ShortExtension
                                  Control0..*
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ url
                                  • 16. Patient.extension:genderIdentity
                                    Slice NamegenderIdentity
                                    Definition

                                    An individual's personal sense of being a man, woman, boy, girl, nonbinary, or something else.

                                    ShortThe individual's gender identity
                                    Comments

                                    This represents an individual’s identity, ascertained by asking them what that identity is.

                                    Control0..*
                                    This element is affected by the following invariants: ele-1
                                    TypeExtension(http://hl7.org/fhir/StructureDefinition/individual-genderIdentity|5.3.0-ballot-tc1)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    18. Patient.extension:personalPronouns
                                    Slice NamepersonalPronouns
                                    Definition

                                    The pronouns to use when referring to an individual in verbal or written communication.

                                    ShortThe pronouns to use when communicating about an individual.
                                    Control0..*
                                    This element is affected by the following invariants: ele-1
                                    TypeExtension(http://hl7.org/fhir/StructureDefinition/individual-pronouns|5.3.0-ballot-tc1)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    20. Patient.extension:patient-birthPlace
                                    Slice Namepatient-birthPlace
                                    Definition

                                    The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

                                    ShortPlace of Birth for patient
                                    Control0..1
                                    TypeExtension(Patient Birth Place) (Extension Type: Address)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    22. Patient.extension:patient-mothersMaidenName
                                    Slice Namepatient-mothersMaidenName
                                    Definition

                                    Mother's maiden (unmarried) name, commonly collected to help verify patient identity.

                                    ShortMother's Maiden name
                                    Control0..1
                                    TypeExtension(Patient Mother's Maiden Name) (Extension Type: string)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    24. Patient.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                                    Summaryfalse
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    26. Patient.identifier
                                    Definition

                                    An identifier for this patient.

                                    ShortAn identifier for this patient
                                    NoteThis is a business identifier, not a resource identifier (see discussion)
                                    Control1..*
                                    TypeIdentifier
                                    Is Modifierfalse
                                    Must Supporttrue
                                    Obligations
                                      ObligationsActorSource
                                      SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                      SHALL:handleConsumer (IPS)from Patient (IPS)
                                      SHOULD:displayConsumer (IPS)from Patient (IPS)
                                      Summarytrue
                                      Requirements

                                      Patients are almost always assigned specific numerical identifiers.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      28. Patient.active
                                      Definition

                                      Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

                                      It is often used to filter patient lists to exclude inactive patients

                                      Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

                                      ShortWhether this patient's record is in active use
                                      Comments

                                      If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

                                      Control0..1
                                      Typeboolean
                                      Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      Need to be able to mark a patient record as not to be used because it was created in error.

                                      Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      30. Patient.name
                                      Definition

                                      A name associated with the individual.

                                      ShortA name associated with the patient
                                      Comments

                                      A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

                                      Control1..*
                                      TypeHumanName
                                      Is Modifierfalse
                                      Must Supporttrue
                                      Obligations
                                        ObligationsActorSource
                                        SHALL:populateCreator (IPS)from Patient (IPS)
                                        SHALL:handleConsumer (IPS)from Patient (IPS)
                                        SHOULD:displayConsumer (IPS)from Patient (IPS)
                                        Summarytrue
                                        Requirements

                                        Need to be able to track the patient by multiple names. Examples are your official name and a partner name. The Alphabetic representation of the name SHALL be always provided

                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ips-pat-1: Patient.name.given, Patient.name.family or Patient.name.text SHALL be present (family.exists() or given.exists() or text.exists())
                                        32. Patient.name.id
                                        Definition

                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                        ShortUnique id for inter-element referencing
                                        Control0..1
                                        Typestring
                                        Is Modifierfalse
                                        XML FormatIn the XML format, this property is represented as an attribute.
                                        Summaryfalse
                                        34. Patient.name.extension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                        ShortAdditional content defined by implementations
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifierfalse
                                        Summaryfalse
                                        Alternate Namesextensions, user content
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        SlicingThis element introduces a set of slices on Patient.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                        • value @ url
                                        • 36. Patient.name.use
                                          Definition

                                          Identifies the purpose for this name.

                                          Shortusual | official | temp | nickname | anonymous | old | maiden
                                          Comments

                                          Applications can assume that a name is current unless it explicitly says that it is temporary or old.

                                          Control0..1
                                          BindingThe codes SHALL be taken from NameUse
                                          (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

                                          The use of a human name.

                                          Typecode
                                          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Obligations
                                            ObligationsActorSource
                                            SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                            SHALL:handleConsumer (IPS)from Patient (IPS)
                                            SHOULD:displayConsumer (IPS)from Patient (IPS)
                                            Summarytrue
                                            Requirements

                                            Allows the appropriate name for a particular context of use to be selected from among a set of names.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            38. Patient.name.text
                                            Definition

                                            Text representation of the full name. Due to the cultural variance around the world a consuming system may not know how to present the name correctly; moreover, not all the parts of the name go in given or family. Creators are therefore strongly encouraged to provide through this element a presented version of the name. Future versions of this guide may require this element

                                            ShortText representation of the full name
                                            Comments

                                            Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                                            Control0..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Obligations
                                              ObligationsActorSource
                                              SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                              SHALL:handleConsumer (IPS)from Patient (IPS)
                                              SHOULD:displayConsumer (IPS)from Patient (IPS)
                                              Summarytrue
                                              Requirements

                                              A renderable, unencoded form.

                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              40. Patient.name.family
                                              Definition

                                              The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

                                              ShortFamily name (often called 'Surname')
                                              Comments

                                              Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

                                              Control1..1
                                              Typestring
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Obligations
                                                ObligationsActorSource
                                                SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                                SHALL:handleConsumer (IPS)from Patient (IPS)
                                                SHOULD:displayConsumer (IPS)from Patient (IPS)
                                                Summarytrue
                                                Alternate Namessurname
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                42. Patient.name.given
                                                Definition

                                                Given name.

                                                ShortGiven names (not always 'first'). Includes middle names
                                                Comments

                                                If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

                                                Control1..*
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Obligations
                                                  ObligationsActorSource
                                                  SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                                  SHALL:handleConsumer (IPS)from Patient (IPS)
                                                  SHOULD:displayConsumer (IPS)from Patient (IPS)
                                                  Summarytrue
                                                  Alternate Namesfirst name, middle name
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  44. Patient.name.prefix
                                                  Definition

                                                  Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

                                                  ShortParts that come before the name
                                                  Control0..*
                                                  Typestring
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  46. Patient.name.suffix
                                                  Definition

                                                  Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

                                                  ShortParts that come after the name
                                                  Control0..*
                                                  Typestring
                                                  Is Modifierfalse
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  48. Patient.name.period
                                                  Definition

                                                  Indicates the period of time when this name was valid for the named person.

                                                  ShortTime period when name was/is in use
                                                  Control0..1
                                                  TypePeriod
                                                  Is Modifierfalse
                                                  Summarytrue
                                                  Requirements

                                                  Allows names to be placed in historical context.

                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  50. Patient.telecom
                                                  Definition

                                                  A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

                                                  ShortA contact detail for the individual
                                                  Comments

                                                  A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

                                                  Control0..*
                                                  TypeContactPoint
                                                  Is Modifierfalse
                                                  Must Supporttrue
                                                  Obligations
                                                    ObligationsActorSource
                                                    SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                                    SHALL:handleConsumer (IPS)from Patient (IPS)
                                                    SHOULD:displayConsumer (IPS)from Patient (IPS)
                                                    Summarytrue
                                                    Requirements

                                                    People have (primary) ways to contact them in some way such as phone, email.

                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    52. Patient.gender
                                                    Definition

                                                    Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

                                                    Shortmale | female | other | unknown
                                                    Comments

                                                    The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

                                                    Control1..1
                                                    BindingThe codes SHALL be taken from AdministrativeGender
                                                    (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                                                    The gender of a person used for administrative purposes.

                                                    Typecode
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Must Supporttrue
                                                    Obligations
                                                      ObligationsActorSource
                                                      SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                                      SHALL:handleConsumer (IPS)from Patient (IPS)
                                                      SHOULD:displayConsumer (IPS)from Patient (IPS)
                                                      Summarytrue
                                                      Requirements

                                                      Needed for identification of the individual, in combination with (at least) name and birth date.

                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      54. Patient.gender.id
                                                      Definition

                                                      unique id for the element within a resource (for internal references)

                                                      Shortxml:id (or equivalent in JSON)
                                                      Control0..1
                                                      Typestring
                                                      Is Modifierfalse
                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                      Summaryfalse
                                                      56. Patient.gender.extension
                                                      Definition

                                                      An Extension

                                                      ShortExtension
                                                      Control0..*
                                                      TypeExtension
                                                      Is Modifierfalse
                                                      Summaryfalse
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      SlicingThis element introduces a set of slices on Patient.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                      • value @ url
                                                      • 58. Patient.gender.extension:originalText
                                                        Slice NameoriginalText
                                                        Definition

                                                        A human language representation of the concept (resource/element) as seen/selected/uttered by the user who entered the data and/or which represents the full intended meaning of the user. This can be provided either directly as text, or as a url that is a reference to a portion of the narrative of a resource (DomainResource.text or Composition.section.text). When it a url, the value should end with a #{id} where the id identifies a specific portion of the referenced content (via an XHTML id attribute).

                                                        ShortOriginal Text that represents the data as seen/selected/uttered originally
                                                        Comments

                                                        The data in the element does not always capture the correct meaning with all the nuances of the original text. In these cases, the text is used to capture the full meaning of the source. This is commonly used to provide "what did the user actually see/type". Note that this extension has the same definition as CodeableConcept.text and SHALL NOT be used on CodeableConcept with type = string in place of CodeableConcept.text but MAY be used with type url. If present on a CodeableConcept with type url as well as CodeableConcept.text, then the CodeableConcept.text SHALL match the referenced narrative.

                                                        It's also possible to link to the resource narrative using the narrativeLink extension which does not claim that the data is derived from the text.

                                                        Control0..1
                                                        TypeExtension(Original Text) (Extension Type: Choice of: string, url)
                                                        Is Modifierfalse
                                                        Summaryfalse
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                        60. Patient.gender.value
                                                        Definition

                                                        Primitive value for code

                                                        ShortPrimitive value for code
                                                        Control0..1
                                                        Typestring
                                                        Is Modifierfalse
                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                        Summaryfalse
                                                        62. Patient.birthDate
                                                        Definition

                                                        The date of birth for the individual.

                                                        ShortThe date of birth for the individual
                                                        Comments

                                                        At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

                                                        Control1..1
                                                        Typedate
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Must Supporttrue
                                                        Obligations
                                                          ObligationsActorSource
                                                          SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                                          SHALL:handleConsumer (IPS)from Patient (IPS)
                                                          SHOULD:displayConsumer (IPS)from Patient (IPS)
                                                          Summarytrue
                                                          Requirements

                                                          Age of the individual drives many clinical processes.

                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          LOINC Code21112-8
                                                          64. Patient.deceased[x]
                                                          Definition

                                                          Indicates if the individual is deceased or not.

                                                          ShortIndicates if the individual is deceased or not
                                                          Comments

                                                          If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                                                          Control0..1
                                                          TypeChoice of: boolean, dateTime
                                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                          Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Summarytrue
                                                          Requirements

                                                          The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          66. Patient.address
                                                          Definition

                                                          An address for the individual.

                                                          ShortAn address for the individual
                                                          Comments

                                                          Patient may have multiple addresses with different uses or applicable periods.

                                                          Control0..*
                                                          TypeAddress
                                                          Is Modifierfalse
                                                          Must Supporttrue
                                                          Obligations
                                                            ObligationsActorSource
                                                            SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                                            SHALL:handleConsumer (IPS)from Patient (IPS)
                                                            SHOULD:displayConsumer (IPS)from Patient (IPS)
                                                            Summarytrue
                                                            Requirements

                                                            May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            68. Patient.maritalStatus
                                                            Definition

                                                            This field contains a patient's most recent marital (civil) status.

                                                            ShortMarital (civil) status of a patient
                                                            Control0..1
                                                            BindingUnless not suitable, these codes SHALL be taken from Marital Status Codes
                                                            (extensible to http://hl7.org/fhir/ValueSet/marital-status|4.0.1)

                                                            The domestic partnership status of a person.

                                                            TypeCodeableConcept
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Requirements

                                                            Most, if not all systems capture it.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            70. Patient.multipleBirth[x]
                                                            Definition

                                                            Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

                                                            ShortWhether patient is part of a multiple birth
                                                            Comments

                                                            Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

                                                            Control0..1
                                                            TypeChoice of: boolean, integer
                                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                            Is Modifierfalse
                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                            Summaryfalse
                                                            Requirements

                                                            For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            72. Patient.photo
                                                            Definition

                                                            Image of the patient.

                                                            ShortImage of the patient
                                                            Comments

                                                            Guidelines:

                                                            • Use id photos, not clinical photos.
                                                            • Limit dimensions to thumbnail.
                                                            • Keep byte count low to ease resource updates.
                                                            Control0..*
                                                            TypeAttachment
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Requirements

                                                            Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            74. Patient.contact
                                                            Definition

                                                            A contact party (e.g. guardian, partner, friend) for the patient.

                                                            ShortA contact party (e.g. guardian, partner, friend) for the patient
                                                            Comments

                                                            Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

                                                            Control0..*
                                                            TypeBackboneElement
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Requirements

                                                            Need to track people you can contact about the patient.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
                                                            76. Patient.contact.id
                                                            Definition

                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                            ShortUnique id for inter-element referencing
                                                            Control0..1
                                                            Typestring
                                                            Is Modifierfalse
                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                            Summaryfalse
                                                            78. Patient.contact.extension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                            ShortAdditional content defined by implementations
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            TypeExtension
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Alternate Namesextensions, user content
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            80. Patient.contact.modifierExtension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                            ShortExtensions that cannot be ignored even if unrecognized
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            TypeExtension
                                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                            Summarytrue
                                                            Requirements

                                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                            Alternate Namesextensions, user content, modifiers
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            82. Patient.contact.relationship
                                                            Definition

                                                            The nature of the relationship between the patient and the contact person.

                                                            ShortThe kind of relationship
                                                            Control0..*
                                                            BindingUnless not suitable, these codes SHALL be taken from PatientContactRelationship
                                                            (extensible to http://hl7.org/fhir/ValueSet/patient-contactrelationship|4.0.1)

                                                            The nature of the relationship between a patient and a contact person for that patient.

                                                            TypeCodeableConcept
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Requirements

                                                            Used to determine which contact person is the most relevant to approach, depending on circumstances.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            84. Patient.contact.name
                                                            Definition

                                                            A name associated with the contact person.

                                                            ShortA name associated with the contact person
                                                            Control0..1
                                                            TypeHumanName
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Requirements

                                                            Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            86. Patient.contact.telecom
                                                            Definition

                                                            A contact detail for the person, e.g. a telephone number or an email address.

                                                            ShortA contact detail for the person
                                                            Comments

                                                            Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

                                                            Control1..*
                                                            TypeContactPoint
                                                            Is Modifierfalse
                                                            Must Supporttrue
                                                            Summaryfalse
                                                            Requirements

                                                            People have (primary) ways to contact them in some way such as phone, email.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            88. Patient.contact.address
                                                            Definition

                                                            Address for the contact person.

                                                            ShortAddress for the contact person
                                                            Control0..1
                                                            TypeAddress
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Requirements

                                                            Need to keep track where the contact person can be contacted per postal mail or visited.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            90. Patient.contact.gender
                                                            Definition

                                                            Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

                                                            Shortmale | female | other | unknown
                                                            Control0..1
                                                            BindingThe codes SHALL be taken from AdministrativeGender
                                                            (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                                                            The gender of a person used for administrative purposes.

                                                            Typecode
                                                            Is Modifierfalse
                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                            Summaryfalse
                                                            Requirements

                                                            Needed to address the person correctly.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            92. Patient.contact.organization
                                                            Definition

                                                            Organization on behalf of which the contact is acting or for which the contact is working.

                                                            ShortOrganization that is associated with the contact
                                                            Control0..1
                                                            This element is affected by the following invariants: pat-1
                                                            TypeReference(Organization)
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Requirements

                                                            For guardians or business related contacts, the organization is relevant.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            94. Patient.contact.period
                                                            Definition

                                                            The period during which this contact person or organization is valid to be contacted relating to this patient.

                                                            ShortThe period during which this contact person or organization is valid to be contacted relating to this patient
                                                            Control0..1
                                                            TypePeriod
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            96. Patient.communication
                                                            Definition

                                                            A language which may be used to communicate with the patient about his or her health.

                                                            ShortA language which may be used to communicate with the patient about his or her health
                                                            Comments

                                                            If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

                                                            Control0..*
                                                            TypeBackboneElement
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Requirements

                                                            If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            98. Patient.communication.id
                                                            Definition

                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                            ShortUnique id for inter-element referencing
                                                            Control0..1
                                                            Typestring
                                                            Is Modifierfalse
                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                            Summaryfalse
                                                            100. Patient.communication.extension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                            ShortAdditional content defined by implementations
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            TypeExtension
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Alternate Namesextensions, user content
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            102. Patient.communication.modifierExtension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                            ShortExtensions that cannot be ignored even if unrecognized
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            TypeExtension
                                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                            Summarytrue
                                                            Requirements

                                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                            Alternate Namesextensions, user content, modifiers
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            104. Patient.communication.language
                                                            Definition

                                                            The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

                                                            ShortThe language which can be used to communicate with the patient about his or her health
                                                            Comments

                                                            The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

                                                            Control1..1
                                                            BindingThe codes SHOULD be taken from CommonLanguages
                                                            (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

                                                            A human language.

                                                            Additional BindingsPurpose
                                                            AllLanguagesMax Binding
                                                            TypeCodeableConcept
                                                            Is Modifierfalse
                                                            Summaryfalse
                                                            Requirements

                                                            Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            106. Patient.communication.preferred
                                                            Definition

                                                            Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

                                                            ShortLanguage preference indicator
                                                            Comments

                                                            This language is specifically identified for communicating healthcare information.

                                                            Control0..1
                                                            Typeboolean
                                                            Is Modifierfalse
                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                            Summaryfalse
                                                            Requirements

                                                            People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            108. Patient.generalPractitioner
                                                            Definition

                                                            Patient's nominated care provider.

                                                            ShortPatient's nominated primary care provider
                                                            Comments

                                                            This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

                                                            Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

                                                            Control0..*
                                                            TypeReference(Organization, Practitioner, PractitionerRole)
                                                            Is Modifierfalse
                                                            Must Supporttrue
                                                            Must Support TypesNo must-support rules about the choice of types/profiles
                                                            Obligations
                                                              ObligationsActorSource
                                                              SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                                              SHALL:handleConsumer (IPS)from Patient (IPS)
                                                              SHOULD:displayConsumer (IPS)from Patient (IPS)
                                                              Summaryfalse
                                                              Alternate NamescareProvider
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              SlicingThis element introduces a set of slices on Patient.generalPractitioner. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                              • type @ resolve()
                                                              • 110. Patient.generalPractitioner:primaryTreatmentCenter
                                                                Slice NameprimaryTreatmentCenter
                                                                Definition

                                                                Report here the institution in which most of the treatment was given

                                                                ShortPrimary treatment center
                                                                Comments

                                                                This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

                                                                Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

                                                                Control0..1
                                                                TypeReference(Organization: Primary Treatment Center / Center of diagnosis, Organization)
                                                                Is Modifierfalse
                                                                Must Supporttrue
                                                                Must Support TypesNo must-support rules about the choice of types/profiles
                                                                Obligations
                                                                  ObligationsActorSource
                                                                  SHALL:populate-if-knownCreator (IPS)from Patient (IPS)
                                                                  SHALL:handleConsumer (IPS)from Patient (IPS)
                                                                  SHOULD:displayConsumer (IPS)from Patient (IPS)
                                                                  Summaryfalse
                                                                  Alternate NamescareProvider
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  112. Patient.generalPractitioner:primaryTreatmentCenter.id
                                                                  Definition

                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                  ShortUnique id for inter-element referencing
                                                                  Control0..1
                                                                  Typestring
                                                                  Is Modifierfalse
                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                  Summaryfalse
                                                                  114. Patient.generalPractitioner:primaryTreatmentCenter.extension
                                                                  Definition

                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                  ShortAdditional content defined by implementations
                                                                  Comments

                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                  Control0..*
                                                                  TypeExtension
                                                                  Is Modifierfalse
                                                                  Summaryfalse
                                                                  Alternate Namesextensions, user content
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                  SlicingThis element introduces a set of slices on Patient.generalPractitioner.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                  • value @ url
                                                                  • 116. Patient.generalPractitioner:primaryTreatmentCenter.reference
                                                                    Definition

                                                                    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                                                                    ShortLiteral reference, Relative, internal or absolute URL
                                                                    Comments

                                                                    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                                                                    Control0..1
                                                                    This element is affected by the following invariants: ref-1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    118. Patient.generalPractitioner:primaryTreatmentCenter.type
                                                                    Definition

                                                                    The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                                                                    The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                                                                    ShortType the reference refers to (e.g. "Patient")
                                                                    Comments

                                                                    This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                                                                    Control0..1
                                                                    BindingUnless not suitable, these codes SHALL be taken from ResourceType
                                                                    (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                                                                    Aa resource (or, for logical models, the URI of the logical model).

                                                                    Typeuri
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    120. Patient.generalPractitioner:primaryTreatmentCenter.identifier
                                                                    Definition

                                                                    An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                                                                    ShortBusiness identifier of the Primary treatment center
                                                                    Comments

                                                                    When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                                                                    When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                                                                    Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                                                                    Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                                                                    NoteThis is a business identifier, not a resource identifier (see discussion)
                                                                    Control0..1
                                                                    TypeIdentifier
                                                                    Is Modifierfalse
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    122. Patient.generalPractitioner:primaryTreatmentCenter.display
                                                                    Definition

                                                                    Plain text narrative that identifies the resource in addition to the resource reference.

                                                                    ShortShort textual description of the Primary treatment center
                                                                    Comments

                                                                    This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                                                                    Control0..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    124. Patient.managingOrganization
                                                                    Definition

                                                                    Organization that is the custodian of the patient record.

                                                                    ShortOrganization that is the custodian of the patient record
                                                                    Comments

                                                                    There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

                                                                    Control0..1
                                                                    TypeReference(Organization)
                                                                    Is Modifierfalse
                                                                    Summarytrue
                                                                    Requirements

                                                                    Need to know who recognizes this patient record, manages and updates it.

                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    126. Patient.link
                                                                    Definition

                                                                    Link to another patient resource that concerns the same actual patient.

                                                                    ShortLink to another patient resource that concerns the same actual person
                                                                    Comments

                                                                    There is no assumption that linked patient records have mutual links.

                                                                    Control0..*
                                                                    TypeBackboneElement
                                                                    Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
                                                                    Summarytrue
                                                                    Requirements

                                                                    There are multiple use cases:

                                                                    • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
                                                                    • Distribution of patient information across multiple servers.
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    128. Patient.link.id
                                                                    Definition

                                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                    ShortUnique id for inter-element referencing
                                                                    Control0..1
                                                                    Typestring
                                                                    Is Modifierfalse
                                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                                    Summaryfalse
                                                                    130. Patient.link.extension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                    ShortAdditional content defined by implementations
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifierfalse
                                                                    Summaryfalse
                                                                    Alternate Namesextensions, user content
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    132. Patient.link.modifierExtension
                                                                    Definition

                                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                                    Comments

                                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                    Control0..*
                                                                    TypeExtension
                                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                    Summarytrue
                                                                    Requirements

                                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                    Alternate Namesextensions, user content, modifiers
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    134. Patient.link.other
                                                                    Definition

                                                                    The other patient resource that the link refers to.

                                                                    ShortThe other patient or related person resource that the link refers to
                                                                    Comments

                                                                    Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

                                                                    Control1..1
                                                                    TypeReference(Patient, RelatedPerson)
                                                                    Is Modifierfalse
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    136. Patient.link.type
                                                                    Definition

                                                                    The type of link between this patient resource and another patient resource.

                                                                    Shortreplaced-by | replaces | refer | seealso
                                                                    Control1..1
                                                                    BindingThe codes SHALL be taken from LinkType
                                                                    (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

                                                                    The type of link between this patient resource and another patient resource.

                                                                    Typecode
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))