HL7.FHIR.CL.GRAVITYCL\Tarea SDOHCC para el paciente - Definitions

Is Modifier false

Summary true

4. Task.meta

Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Short Metadata about the resource

Control 0..1

Meta

Is Modifier false

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

6. Task.implicitRules

Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Short A set of rules under which this content was created

Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control 0..1

uri

Is Modifier true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

8. Task.language

Definition

The base language in which the resource is written.

Short Language of the resource content

Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control 0..1

The codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Additional Bindings

Purpose

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

10. Task.text

Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Short Text summary of the resource, for human interpretation

Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control 0..1

Narrative

Is Modifier false

Summary false

Alternate Names narrative, html, xhtml, display

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

12. Task.contained

Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Short Contained, inline Resources

Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control 0..*

Resource

Is Modifier false

Summary false

Alternate Names inline resources, anonymous resources, contained resources

14. Task.extension

Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short Additional content defined by implementations

Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

16. Task.modifierExtension

Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them

Summary false

Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Names extensions, user content

18. Task.identifier

Definition

The business identifier for this task.

Short Task Instance Identifier

Note This is a business identifier, not a resource identifier (see discussion)

Control 0..*

Identifier

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

20. Task.instantiatesCanonical

Definition

The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.

Short Formal definition of task

Control 0..1

Type canonical(ActivityDefinition)

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Requirements

Enables a formal definition of how he task is to be performed, enabling automation.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

22. Task.instantiatesUri

Definition

The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.

Short Formal definition of task

Control 0..1

uri

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Requirements

Enables a formal definition of how he task is to be performed (e.g. using BPMN, BPEL, XPDL or other formal notation to be associated with a task), enabling automation.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

24. Task.basedOn

Definition

BasedOn refers to a higher-level authorization that triggered the creation of the task. It references a "request" resource such as a ServiceRequest, MedicationRequest, ServiceRequest, CarePlan, etc. which is distinct from the "request" resource the task is seeking to fulfill. This latter resource is referenced by FocusOn. For example, based on a ServiceRequest (= BasedOn), a task is created to fulfill a procedureRequest ( = FocusOn ) to collect a specimen from a patient.

Short Request fulfilled by this task

Control 0..*

Type Reference(Resource)

Is Modifier false

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

26. Task.groupIdentifier

Definition

An identifier that links together multiple tasks and other requests that were created in the same context.

Short Requisition or grouper id

Control 0..1

Identifier

Is Modifier false

Summary true

Requirements

Billing and/or reporting can be linked to whether multiple requests were created as a single unit.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

28. Task.partOf

Definition

Task that this particular task is part of.

Short Composite task

Comments

This should usually be 0..1.

Control 0..*

Type Reference(Task)

Is Modifier false

Summary true

Requirements

Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

This element introduces a set of slices on Task.partOf. The slices areUnordered and Open, and can be differentiated using the following discriminators:

profile @ resolve()

30. Task.partOf:SupportedPartOf

Slice Name SupportedPartOf

Definition

Task that this particular task is part of.

Short Composite task

Comments

This should usually be 0..1.

Control 0..*

Type Reference(Tarea de SDOHCC para la gestión de derivaciones, Tarea SDOHCC para el paciente)

Is Modifier false

Must Support true

Must Support Types No must-support rules about the choice of types/profiles

Summary true

Requirements

Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

32. Task.status

Definition

The current status of the task.

Short draft | requested | received | accepted | +

Comments

Para obtener más detalles sobre Task.status, consulte Checking Task Status

Control 1..1

Binding The codes SHALL be taken from ValueSet SDOHCC para Estado de la Tarea.
(required to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetTaskStatus-CL)

code

Is Modifier true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Must Support true

Summary true

Requirements

Estos estados permiten la coordinación del estado de la tarea con soluciones de flujo de trabajo listas para usar que respaldan la automatización de tareas.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

34. Task.statusReason

Definition

Si la tarea es cancelada por el paciente, se debe proporcionar una explicación de por qué.

Short Reason for current status

Comments

Esto se aplica al estado actual.Consulte el historial de la tarea para ver las razones de los estados anteriores.Si el estado de la tarea está cancelado,entonces se debe incluir Task.statusReason.text.

Control 0..1

Codes to identify the reason for current status. These will typically be specific to a particular workflow.

Is Modifier false

Must Support true

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

36. Task.statusReason.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

38. Task.statusReason.extension

Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

This element introduces a set of slices on Task.statusReason.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

40. Task.statusReason.coding

Definition

A reference to a code defined by a terminology system.

Short Code defined by a terminology system

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control 0..*

Coding

Is Modifier false

Summary true

Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

42. Task.statusReason.text

Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Short Plain text representation of the concept

Comments

Very often the text is the same as a displayName of one of the codings.

Control 1..1

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Must Support true

Summary true

Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

44. Task.businessStatus

Definition

Contains business-specific nuances of the business state.

Short E.g. "Specimen collected", "IV prepped"

Control 0..1

The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.

Is Modifier false

Summary true

Requirements

There's often a need to track substates of a task - this is often variable by specific workflow implementation.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

46. Task.intent

Definition

Indica el "nivel" de ejecutabilidad asociado con la tarea.

Short order

Comments

Las tareas del paciente siempre serán órdenes.

Control 1..1

The codes SHALL be taken from TaskIntent
(required to http://hl7.org/fhir/ValueSet/task-intent|4.0.1)

Distinguishes whether the task is a proposal, plan or full order.

code

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Fixed Value order

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

48. Task.priority

Definition

Indica cuán rápido debe ser abordada la tarea por el paciente.

Short rutinaria | urgente.

Control 1..1

Binding The codes SHALL be taken from ValueSet SDOHCC para Prioridad de Tarea.
(required to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetTaskPriority-CL)

code

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Must Support true

Summary false

Requirements

Se utiliza para identificar el nivel de prioridad asignado a esta tarea.Para las tareas identificadas como urgentes,la capacidad de entregar un servicio relacionado puede depender de la finalización de la tarea.

Meaning if Missing If missing, this task should be performed with normal priority

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

50. Task.code

Definition

A name or code (or both) briefly describing what the task involves.

Short Task Type

Comments

The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.

Control 1..1

Binding Unless not suitable, these codes SHALL be taken from ValueSet SDOHCC para el Código de Tarea
(extensible to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetTaskCode-CL)

Is Modifier false

Must Support true

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

52. Task.code.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

54. Task.code.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

This element introduces a set of slices on Task.code.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

56. Task.code.coding

Definition

A reference to a code defined by a terminology system.

Short Code defined by a terminology system

Comments

Control 0..*

Coding

Is Modifier false

Summary true

Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

58. Task.code.text

Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Short Plain text representation of the concept

Comments

Very often the text is the same as a displayName of one of the codings.

Control 0..1

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Must Support true

Summary true

Requirements

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

60. Task.description

Definition

A free-text description of what is to be performed.

Short Human-readable explanation of task

Comments

Si Task.code es "información general", Task.description debe ser mostrada al usuario sin ninguna otra expectativa computable,excepto permitir que el paciente actualice Task.status y,opcionalmente,capture una respuesta en texto libre para Task.output.

Control 0..1
This element is affected by the following invariants: SDOH-Task-2, SDOH-Task-7

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Must Support true

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

62. Task.focus

Definition

The request being actioned or the resource being manipulated by this task.

Short What task is acting on

Comments

If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).

Control 0..1
This element is affected by the following invariants: SDOH-Task-3

Type Reference(Resource)

Is Modifier false

Must Support true

Summary true

Requirements

Used to identify the thing to be done.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

64. Task.for

Definition

The entity who benefits from the performance of the service specified in the task (e.g., the patient).

Short Beneficiary of the Task

Control 1..1

Type Reference(CL Paciente)

Is Modifier false

Must Support true

Summary true

Requirements

Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control.

Alternate Names Patient

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

66. Task.encounter

Definition

The healthcare event (e.g. a patient and healthcare provider interaction) during which this task was created.

Short Healthcare event during which this task originated

Control 0..1

Type Reference(Encounter)

Is Modifier false

Summary true

Requirements

For some tasks it may be important to know the link between the encounter the task originated within.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

68. Task.executionPeriod

Definition

Identifies the time action was first taken against the task (start) and/or the time final action was taken against the task prior to marking it as completed (end).

Short Start and end time of execution

Control 0..1

Period

Is Modifier false

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

70. Task.authoredOn

Definition

The date and time this task was created.

Short Task Creation Date

Control 1..1
This element is affected by the following invariants: inv-1

dateTime

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Must Support true

Summary false

Requirements

Most often used along with lastUpdated to track duration of task to supporting monitoring and management.

Alternate Names Created Date

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

72. Task.lastModified

Definition

The date and time of last modification to this task.

Short Task Last Modified Date

Control 0..1
This element is affected by the following invariants: inv-1

dateTime

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Requirements

Used along with history to track task activity and time in a particular task state. This enables monitoring and management.

Alternate Names Update Date

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

74. Task.requester

Definition

The creator of the task.

Short Who is asking for task to be done

Control 1..1

Type Reference(CL RolClinico, CL Organización)

Is Modifier false

Must Support true

Must Support Types No must-support rules about the choice of types/profiles

Summary true

Requirements

Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

76. Task.performerType

Definition

The kind of participant that should perform the task.

Short Requested performer

Control 0..*

The codes SHOULD be taken from ProcedurePerformerRoleCodes
(preferred to http://hl7.org/fhir/ValueSet/performer-role)

The type(s) of task performers allowed.

Is Modifier false

Summary false

Requirements

Use to distinguish tasks on different activity queues.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

78. Task.owner

Definition

Individual organization or Device currently responsible for task execution.

Short Responsible individual

Comments

Tasks may be created with an owner not yet identified.

Control 1..1

Type Reference(CL Paciente, RelatedPerson)

Is Modifier false

Must Support true

Must Support Types No must-support rules about the choice of types/profiles

Summary true

Requirements

Identifies who is expected to perform this task.

Alternate Names Performer, Executer

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

80. Task.location

Definition

Principal physical location where the this task is performed.

Short Where task occurs

Control 0..1

Type Reference(Location)

Is Modifier false

Summary true

Requirements

Ties the event to where the records are likely kept and provides context around the event occurrence (e.g. if it occurred inside or outside a dedicated healthcare setting).

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

82. Task.reasonCode

Definition

A description or code indicating why this task needs to be performed.

Short Why task is needed

Comments

This should only be included if there is no focus or if it differs from the reason indicated on the focus.

Control 0..1

Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

84. Task.reasonReference

Definition

A resource reference indicating why this task needs to be performed.

Short Why task is needed

Comments

Tasks might be justified based on an Observation, a Condition, a past or planned procedure, etc. This should only be included if there is no focus or if it differs from the reason indicated on the focus. Use the CodeableConcept text element in Task.reasonCode if the data is free (uncoded) text.

Control 0..1

Type Reference(Resource)

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

86. Task.insurance

Definition

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be relevant to the Task.

Short Associated insurance coverage

Control 0..*

Type Reference(Coverage, ClaimResponse)

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

88. Task.note

Definition

Free-text information captured about the task as it progresses.

Short Comments made about the task

Control 0..*

Annotation

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

90. Task.relevantHistory

Definition

Links to Provenance records for past versions of this Task that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the task.

Short Key events in history of the Task

Comments

This element does not point to the Provenance associated with the current version of the resource - as it would be created after this version existed. The Provenance for the current version can be retrieved with a _revinclude.

Control 0..*

Type Reference(Provenance)

Is Modifier false

Summary false

Alternate Names Status History

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

92. Task.restriction

Definition

If the Task.focus is a request resource and the task is seeking fulfillment (i.e. is asking for the request to be actioned), this element identifies any limitations on what parts of the referenced request should be actioned.

Short Constraints on fulfillment tasks

Control 0..1

Is Modifier false

Summary false

Requirements

Sometimes when fulfillment is sought, you don't want full fulfillment.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

94. Task.restriction.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

96. Task.restriction.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

98. Task.restriction.modifierExtension

Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

100. Task.restriction.repetitions

Definition

Indicates the number of times the requested action should occur.

Short How many times to repeat

Control 0..1

positiveInt

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Requirements

E.g. order that requests monthly lab tests, fulfillment is sought for 1.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

102. Task.restriction.period

Definition

Over what time-period is fulfillment sought.

Short When fulfillment sought

Comments

Note that period.high is the due date representing the time by which the task should be completed.

Control 0..1

Period

Is Modifier false

Summary false

Requirements

E.g. order that authorizes 1 year's services. Fulfillment is sought for next 3 months.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

104. Task.restriction.recipient

Definition

For requests that are targeted to more than on potential recipient/target, for whom is fulfillment sought?

Short For whom is fulfillment sought?

Control 0..*

Type Reference(Patient, Practitioner, PractitionerRole, RelatedPerson, Group, Organization)

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

106. Task.input

Definition

Additional information that may be needed in the execution of the task.

Short Information used to perform task

Control 0..*

Is Modifier false

Summary false

Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate Names Supporting Information

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

This element introduces a set of slices on Task.input. The slices areUnordered and Open, and can be differentiated using the following discriminators:

pattern @ type

108. Task.input.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

110. Task.input.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

112. Task.input.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

114. Task.input.type

Definition

A code or description indicating how the input is intended to be used as part of the task execution.

Short Label for the input

Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control 1..1

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Is Modifier false

Summary false

Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

116. Task.input.value[x]

Definition

The value of the input parameter as a basic type.

Short Content to use in performing the task

Control 1..1

Type Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

118. Task.input:Questionnaire

Slice Name Questionnaire

Definition

Additional information that may be needed in the execution of the task.

Short Information used to perform task

Control 0..1
This element is affected by the following invariants: SDOH-Task-1

Is Modifier false

Must Support true

Summary false

Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate Names Supporting Information

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

120. Task.input:Questionnaire.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

122. Task.input:Questionnaire.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

124. Task.input:Questionnaire.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

126. Task.input:Questionnaire.type

Definition

A code or description indicating how the input is intended to be used as part of the task execution.

Short Label for the input

Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control 1..1

Códigos para identificar tipos de parámetros de entrada.Estos suelen ser específicos de un flujo de trabajo particular.Los códigos representan tipos de cuestionarios que se le podría pedir al paciente que complete.

Is Modifier false

Summary false

Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Pattern Value { "coding" : [{ "system" : "http://hl7.org/fhir/uv/sdc/CodeSystem/temp", "code" : "questionnaire" }] }

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

128. Task.input:Questionnaire.value[x]

Definition

The value of the input parameter as a basic type.

Short Content to use in performing the task

Comments

Esto hace referencia al perfil de Cuestionario Base SDC para permitir el uso de cuestionarios (por ejemplo, un cuestionario de satisfacción del paciente) que no son cuestionarios de detección de SDOH. Sin embargo, para cuestionarios que están destinados a producir recursos FHIR (por ejemplo, Observaciones o Condiciones), se debe utilizar el Cuestionario Extraíble SDC-StructureMap.

Control 1..1

Type canonical(SDCBaseQuestionnaire)

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

130. Task.input:QuestionnairePDF

Slice Name QuestionnairePDF

Definition

Additional information that may be needed in the execution of the task.

Short Information used to perform task

Control 0..1
This element is affected by the following invariants: SDOH-Task-1

Is Modifier false

Must Support true

Summary false

Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate Names Supporting Information

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

132. Task.input:QuestionnairePDF.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

134. Task.input:QuestionnairePDF.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

136. Task.input:QuestionnairePDF.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

138. Task.input:QuestionnairePDF.type

Definition

A code or description indicating how the input is intended to be used as part of the task execution.

Short Label for the input

Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control 1..1

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Is Modifier false

Summary false

Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Pattern Value { "coding" : [{ "system" : "https://hl7chile.cl/fhir/ig/gravitycl/CodeSystem/SDOHCC-CodeSystemTemporaryCodesCL", "code" : "questionnaire-pdf" }] }

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

140. Task.input:QuestionnairePDF.value[x]

Definition

The value of the input parameter as a basic type.

Short Content to use in performing the task

Control 1..1

Type Reference(DocumentReference)

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

142. Task.input:QuestionnaireURL

Slice Name QuestionnaireURL

Definition

Additional information that may be needed in the execution of the task.

Short Information used to perform task

Control 0..1
This element is affected by the following invariants: SDOH-Task-1

Is Modifier false

Must Support true

Summary false

Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate Names Supporting Information

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

144. Task.input:QuestionnaireURL.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

146. Task.input:QuestionnaireURL.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

148. Task.input:QuestionnaireURL.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

150. Task.input:QuestionnaireURL.type

Definition

A code or description indicating how the input is intended to be used as part of the task execution.

Short Label for the input

Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control 1..1

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Is Modifier false

Summary false

Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Pattern Value { "coding" : [{ "system" : "https://hl7chile.cl/fhir/ig/gravitycl/CodeSystem/SDOHCC-CodeSystemTemporaryCodesCL", "code" : "questionnaire-url" }] }

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

152. Task.input:QuestionnaireURL.value[x]

Definition

The value of the input parameter as a basic type.

Short Content to use in performing the task

Control 1..1

url

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

154. Task.input:QuestionnaireCategory

Slice Name QuestionnaireCategory

Definition

Additional information that may be needed in the execution of the task.

Short Information used to perform task

Control 0..1
This element is affected by the following invariants: SDOH-Task-1

Is Modifier false

Must Support true

Summary false

Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate Names Supporting Information

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

156. Task.input:QuestionnaireCategory.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

158. Task.input:QuestionnaireCategory.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

160. Task.input:QuestionnaireCategory.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

162. Task.input:QuestionnaireCategory.type

Definition

A code or description indicating how the input is intended to be used as part of the task execution.

Short Label for the input

Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control 1..1

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Is Modifier false

Summary false

Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Pattern Value { "coding" : [{ "system" : "https://hl7chile.cl/fhir/ig/gravitycl/CodeSystem/SDOHCC-CodeSystemTemporaryCodesCL", "code" : "questionnaire-category" }] }

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

164. Task.input:QuestionnaireCategory.value[x]

Definition

The value of the input parameter as a basic type.

Short Content to use in performing the task

Control 1..1

The codes SHALL be taken from ValueSet SDOHCC para Categoría Cuestionario SDOH.
(required to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetSDOHQuestionnaireCategory-CL)

Types of Social Determinant of Health (SDOH) questionnaires that the patient might be asked to complete

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

166. Task.input:Contact

Slice Name Contact

Definition

Additional information that may be needed in the execution of the task.

Short Information used to perform task

Comments

Si Task.code es "hacer-contacto" y se proporciona múltiples Task.inputs,la intención es que el propietario de la tarea seleccione solo uno para contactar.Si se necesita hacer más de un contacto,debe haber tareas separadas.

Control 0..*
This element is affected by the following invariants: SDOH-Task-4

Is Modifier false

Must Support true

Summary false

Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate Names Supporting Information

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

168. Task.input:Contact.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

170. Task.input:Contact.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

172. Task.input:Contact.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

174. Task.input:Contact.type

Definition

A code or description indicating how the input is intended to be used as part of the task execution.

Short Label for the input

Comments

Cuando Task.code es "hacer-contacto", "contacto-entidad" se utiliza para Task.input.type para indicar que el propietario de la tarea debe contactar a uno de los servicios de salud representados en Task.input.value.

Control 1..1

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Is Modifier false

Summary false

Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Pattern Value { "coding" : [{ "system" : "https://hl7chile.cl/fhir/ig/gravitycl/CodeSystem/SDOHCC-CodeSystemTemporaryCodesCL", "code" : "contact-entity" }] }

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

176. Task.input:Contact.value[x]

Definition

The value of the input parameter as a basic type.

Short Content to use in performing the task

Control 1..1

Type Reference(Servicio de salud SDOHCC, CL RolClinico, CL Prestador, CL Organización)

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

178. Task.output

Definition

Outputs produced by the Task.

Short Information produced as part of task

Control 0..*
This element is affected by the following invariants: SDOH-Task-2, SDOH-Task-5, SDOH-Task-6, SDOH-Task-7

Is Modifier false

Summary false

Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

This element introduces a set of slices on Task.output. The slices areUnordered and Open, and can be differentiated using the following discriminators:

pattern @ type

180. Task.output.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

182. Task.output.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

184. Task.output.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

186. Task.output.type

Definition

The name of the Output parameter.

Short Label for output

Control 1..1

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

188. Task.output.value[x]

Is Modifier false

Summary false

Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Definition

The value of the Output parameter as a basic type.

Short Result of output

Control 1..1

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Requirements

Task outputs can take any form.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

190. Task.output:QuestionnaireResponse

Slice Name QuestionnaireResponse

Definition

Outputs produced by the Task.

Short Information produced as part of task

Control 0..1
This element is affected by the following invariants: SDOH-Task-5, SDOH-Task-6, SDOH-Task-7

Is Modifier false

Must Support true

Summary false

Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

192. Task.output:QuestionnaireResponse.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

194. Task.output:QuestionnaireResponse.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

196. Task.output:QuestionnaireResponse.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

198. Task.output:QuestionnaireResponse.type

Definition

The name of the Output parameter.

Short Label for output

Control 1..1

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

Is Modifier false

Summary false

Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Pattern Value { "coding" : [{ "system" : "http://hl7.org/fhir/uv/sdc/CodeSystem/temp", "code" : "questionnaire-response" }] }

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

200. Task.output:QuestionnaireResponse.value[x]

Definition

The value of the Output parameter as a basic type.

Short Result of output

Control 1..1

Type Reference(SDC Questionnaire Response)

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Summary false

Requirements

Task outputs can take any form.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

202. Task.output:QuestionnairePDFCompleted

Slice Name QuestionnairePDFCompleted

Definition

Outputs produced by the Task.

Short Information produced as part of task

Control 0..1
This element is affected by the following invariants: SDOH-Task-6, SDOH-Task-5, SDOH-Task-7

Is Modifier false

Must Support true

Summary false

Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

204. Task.output:QuestionnairePDFCompleted.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

206. Task.output:QuestionnairePDFCompleted.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

208. Task.output:QuestionnairePDFCompleted.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

210. Task.output:QuestionnairePDFCompleted.type

Definition

The name of the Output parameter.

Short Label for output

Control 1..1

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

Is Modifier false

Summary false

Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Pattern Value { "coding" : [{ "system" : "https://hl7chile.cl/fhir/ig/gravitycl/CodeSystem/SDOHCC-CodeSystemTemporaryCodesCL", "code" : "questionnaire-pdf-completed" }] }

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

212. Task.output:QuestionnairePDFCompleted.value[x]

Definition

The value of the Output parameter as a basic type.

Short Result of output

Control 1..1

Type Reference(DocumentReference)

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Summary false

Requirements

Task outputs can take any form.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

214. Task.output:GeneralInformationResponse

Slice Name GeneralInformationResponse

Definition

Outputs produced by the Task.

Short Information produced as part of task

Control 0..*
This element is affected by the following invariants: SDOH-Task-2, SDOH-Task-7, SDOH-Task-6

Is Modifier false

Must Support true

Summary false

Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

216. Task.output:GeneralInformationResponse.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

218. Task.output:GeneralInformationResponse.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

220. Task.output:GeneralInformationResponse.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

222. Task.output:GeneralInformationResponse.type

Definition

The name of the Output parameter.

Short Label for output

Control 1..1

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

Is Modifier false

Summary false

Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Pattern Value { "coding" : [{ "system" : "https://hl7chile.cl/fhir/ig/gravitycl/CodeSystem/SDOHCC-CodeSystemTemporaryCodesCL", "code" : "general-information-response" }] }

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

224. Task.output:GeneralInformationResponse.value[x]

Definition

The value of the Output parameter as a basic type.

Short Result of output

Control 1..1

markdown

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Requirements

Task outputs can take any form.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

226. Task.output:ChosenContact

Slice Name ChosenContact

Definition

Outputs produced by the Task.

Short Information produced as part of task

Comments

Si Task.code es "hacer-contacto" y se proporcionan múltiples Task.input, la intención es que el propietario de la tarea seleccione solo uno para contactar y pueda indicar el "contacto-elegido".

Control 0..1
This element is affected by the following invariants: SDOH-Task-7, SDOH-Task-5, SDOH-Task-6

Is Modifier false

Must Support true

Summary false

Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

228. Task.output:ChosenContact.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

230. Task.output:ChosenContact.extension

Definition

Short Additional content defined by implementations

Comments

Control 0..*

Is Modifier false

Summary false

Alternate Names extensions, user content

232. Task.output:ChosenContact.modifierExtension

Definition

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored even if unrecognized

Comments

Control 0..*

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them

Summary true

Requirements

Alternate Names extensions, user content, modifiers

234. Task.output:ChosenContact.type

Definition

The name of the Output parameter.

Short Label for output

Control 1..1

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

Is Modifier false

Summary false

Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate Names Name

Pattern Value { "coding" : [{ "system" : "https://hl7chile.cl/fhir/ig/gravitycl/CodeSystem/SDOHCC-CodeSystemTemporaryCodesCL", "code" : "chosen-contact" }] }

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

236. Task.output:ChosenContact.value[x]

Definition

The value of the Output parameter as a basic type.

Short Result of output

Control 1..1