Atención clínica de SDOH
0.1.0 - ci-build Chile flag

Atención clínica de SDOH, published by HL7 Chile. This guide is not an authorized publication; it is the continuous build for version 0.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/SIMSADIs/GI-SDOH/ and changes regularly. See the Directory of published versions

Resource Profile: SDOHCCGoalCL - Detailed Descriptions

Draft as of 2024-12-12

Definitions for the SDOHCC-GoalCL resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Goal
Definition

Para la representación de las metas/objetivos relacionados con los SDOH.

ShortDescribe el(los) objetivo(s) relacionado(s) con los SDOH para un paciente.
Comments

Muchos de los perfiles SDOHCC se referencian entre sí. Un flujo respaldado por esta IG es que las Respuestas a cuestionarios resultan de Observaciones que pueden usarse como evidencia para Condiciones que pueden conducir a Metas/Objetivos, Solicitudes de servicio y Procedimientos. Sin embargo, también son posibles caminos alternativos.

2. Goal.achievementStatus
Must Supporttrue
4. Goal.category
SlicingThis element introduces a set of slices on Goal.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
  • 6. Goal.category:SDOH
    Slice NameSDOH
    Definition

    Una categoría de SDOH asignada a la meta/objetivo.

    ShortPor ejemplo, inseguridad alimentaria | inseguridad en el transporte
    Control0..*
    BindingThe codes SHALL be taken from ValueSet SDOHCC para Categoría SDOH
    (required to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetSDOHCategoryCL)

    Códigos para categorías de SDOH de alto nivel.

    Must Supporttrue
    Requirements

    Los códigos de este value set se pueden usar para asignar una o más categorías de SDOH (por ejemplo, inseguridad alimentaria, inseguridad en el transporte,etc.) a una meta/objetivo. Se recomienda utilizar códigos de categoría de SDOH para facilitar la búsqueda de metas/objetivos relacionados con SDOH.

    8. Goal.description
    Comments

    Si no hay código disponible, utiliza CodeableConcept.text.

    BindingThe codes SHOULD be taken from ValueSet SDOHCC LOINC-SNOMEDCT
    (preferred to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetLOINCSNOMEDCT-CL)

    Códigos que proporcionan los detalles de un objetivo particular. En muchos sistemas, sólo se utilizará el elemento de texto.

    10. Goal.subject
    Definition

    Identifica al paciente para el cual se está estableciendo la meta/objetivo.

    12. Goal.target
    14. Goal.target.measure
    BindingThe codes SHOULD be taken from ValueSet SDOHCC LOINC-SNOMEDCT
    (preferred to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetLOINCSNOMEDCT-CL)

    Códigos para identificar el valor que se está rastreando,por ejemplo, peso corporal, presión arterial o nivel de hemoglobina A1c.

    16. Goal.statusDate
    Comments

    Para ver la fecha de estados anteriores, consulta el historial.

    El recurso Goal no especifica claramente si Goal.statusDate se aplica a Goal.achievementStatus o a Goal.lifecycleStatus. Para un uso consistente en el contexto de SDOH, se recomienda que Goal.statusDate se sincronice con Goal.achievementStatus.

    18. Goal.addresses
    TypeReference(CL Condición-Diagnóstico, CL Observación, RiskAssessment)
    SlicingThis element introduces a set of slices on Goal.addresses. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • profile @ resolve()
    • 20. Goal.addresses:SupportedAddresses
      Slice NameSupportedAddresses
      Control0..*
      TypeReference(Condición SDOHCC, Respuesta de Detección de Observación de SDOHCC, Evaluación de Observación de SDOHCC)
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Requirements

      Cuando una meta/objetivo aborda las observaciones de respuesta a la evaluación de SDOH generadas a partir de encuestas/cuestionarios, observaciones de evaluación de SDOH o condiciones de SDOH, Goal.addresses debe hacer una referencia a instancias que cumplan con los perfiles de Respuesta de Detección de Observación de SDOHCC, Condición SDOHCC, o Evaluación de Observación de SDOHCC. Sin embargo,también son posibles referencias a otros tipos de instancias.

      22. Goal.outcomeCode
      Comments

      Ten en cuenta que esto no debe duplicar el estado de la meta/objetivo.

      La información representada por Goal.outcomeCode puede superponerse significativamente con la información representada por Goal.outcomeReference. Múltiples enfoques para representar la misma información puede afectar negativamente la interoperabilidad. Por lo tanto, donde haya una superposición significativa en la información proporcionada por Goal.outcomeCode y Goal.outcomeReference, se recomienda utilizar Goal.outcomeReference para proporcionar detalles sobre los resultados del objetivo.

      BindingThe codes SHOULD be taken from ValueSet SDOHCC LOINC-SNOMEDCT
      (preferred to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetLOINCSNOMEDCT-CL)

      El resultado de la meta/objetivo; por ejemplo, "Seguridad alimentaria", "Tiene acceso a un automóvil".

      24. Goal.outcomeReference
      Comments

      El resultado de la meta/objetivo es independiente del resultado de las actividades relacionadas. Por ejemplo, si la meta/objetivo es alcanzar un peso corporal objetivo de 68 kg y se define una actividad en el plan de atención para hacer dieta, entonces el resultado de la actividad del plan de acción podría ser las calorías consumidas, mientras que el resultado del objetivo es una observación del peso corporal real medido.

      Además, consulta los comentarios de Goal.outcomeCode.

      SlicingThis element introduces a set of slices on Goal.outcomeReference. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • profile @ resolve()
      • 26. Goal.outcomeReference:SupportedOutcomeReference
        Slice NameSupportedOutcomeReference
        Control0..*
        TypeReference(Respuesta de Detección de Observación de SDOHCC, Evaluación de Observación de SDOHCC)
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Requirements

        Cuando un resultado de la meta/objetivo puede ser representado por observaciones de respuesta a evaluación de SDOH o observaciones de evaluación de SDOH, Goal.outcome debe hacer referencia a instancias que cumplan con los perfiles de Respuesta de Detección de Observación de SDOHCC o Evaluación de Observación de SDOHCC. Sin embargo, también son posibles referencias a otros tipos de instancias.

        Guidance on how to interpret the contents of this table can be found here

        0. Goal
        Definition

        Para la representación de las metas/objetivos relacionados con los SDOH.


        Describes the intended objective(s) for a patient, group or organization care, for example, weight loss, restoring an activity of daily living, obtaining herd immunity via immunization, meeting a process improvement objective, etc.

        ShortDescribe el(los) objetivo(s) relacionado(s) con los SDOH para un paciente.Describes the intended objective(s) for a patient, group or organization
        Comments

        Muchos de los perfiles SDOHCC se referencian entre sí. Un flujo respaldado por esta IG es que las Respuestas a cuestionarios resultan de Observaciones que pueden usarse como evidencia para Condiciones que pueden conducir a Metas/Objetivos, Solicitudes de servicio y Procedimientos. Sin embargo, también son posibles caminos alternativos.


        Goal can be achieving a particular change or merely maintaining a current state or even slowing a decline.

        Control0..*
        Is Modifierfalse
        Summaryfalse
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        2. Goal.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        4. Goal.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        6. Goal.lifecycleStatus
        Definition

        The state of the goal throughout its lifecycle.

        Shortproposed | planned | accepted | active | on-hold | completed | cancelled | entered-in-error | rejected
        Comments

        This element is labeled as a modifier because the lifecycleStatus contains codes that mark the resource as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from GoalLifecycleStatushttp://hl7.org/fhir/ValueSet/goal-status|4.0.1
        (required to http://hl7.org/fhir/ValueSet/goal-status|4.0.1)

        Codes that reflect the current state of a goal and whether the goal is still being targeted.

        Typecode
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows knowing whether goal needs to be further tracked.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. Goal.achievementStatus
        Definition

        Describes the progression, or lack thereof, towards the goal against the target.

        Shortin-progress | improving | worsening | no-change | achieved | sustaining | not-achieved | no-progress | not-attainable
        Control0..1
        BindingThe codes SHOULD be taken from GoalAchievementStatushttp://hl7.org/fhir/ValueSet/goal-achievement
        (preferred to http://hl7.org/fhir/ValueSet/goal-achievement)

        Indicates the progression, or lack thereof, towards the goal against the target.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. Goal.category
        Definition

        Indicates a category the goal falls within.

        ShortE.g. Treatment, dietary, behavioral, etc.
        Control0..*
        BindingFor example codes, see GoalCategoryhttp://hl7.org/fhir/ValueSet/goal-category
        (example to http://hl7.org/fhir/ValueSet/goal-category)

        Codes for grouping and sorting goals.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows goals to be filtered and sorted.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Goal.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ $this
        • 12. Goal.category:SDOH
          Slice NameSDOH
          Definition

          Una categoría de SDOH asignada a la meta/objetivo.


          Indicates a category the goal falls within.

          ShortPor ejemplo, inseguridad alimentaria | inseguridad en el transporteE.g. Treatment, dietary, behavioral, etc.
          Control0..*
          BindingThe codes SHALL be taken from For example codes, see ValueSet SDOHCC para Categoría SDOHhttp://hl7.org/fhir/ValueSet/goal-category
          (required to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetSDOHCategoryCL)

          Códigos para categorías de SDOH de alto nivel.


          Codes for grouping and sorting goals.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Los códigos de este value set se pueden usar para asignar una o más categorías de SDOH (por ejemplo, inseguridad alimentaria, inseguridad en el transporte,etc.) a una meta/objetivo. Se recomienda utilizar códigos de categoría de SDOH para facilitar la búsqueda de metas/objetivos relacionados con SDOH.


          Allows goals to be filtered and sorted.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          14. Goal.description
          Definition

          Human-readable and/or coded description of a specific desired objective of care, such as "control blood pressure" or "negotiate an obstacle course" or "dance with child at wedding".

          ShortCode or text describing goal
          Comments

          Si no hay código disponible, utiliza CodeableConcept.text.


          If no code is available, use CodeableConcept.text.

          Control1..1
          BindingThe codes SHOULD be taken from For example codes, see ValueSet SDOHCC LOINC-SNOMEDCThttp://hl7.org/fhir/ValueSet/clinical-findings
          (preferred to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetLOINCSNOMEDCT-CL)

          Códigos que proporcionan los detalles de un objetivo particular. En muchos sistemas, sólo se utilizará el elemento de texto.


          Codes providing the details of a particular goal. This will generally be system or implementation guide-specific. In many systems, only the text element will be used.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Without a description of what's trying to be achieved, element has no purpose.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          16. Goal.subject
          Definition

          Identifica al paciente para el cual se está estableciendo la meta/objetivo.


          Identifies the patient, group or organization for whom the goal is being established.

          ShortWho this goal is intended for
          Control1..1
          TypeReference(Patient, Group, Organization)
          Is Modifierfalse
          Summarytrue
          Requirements

          Subject is optional to support annonymized reporting.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          18. Goal.statusDate
          Definition

          Identifies when the current status. I.e. When initially created, when achieved, when cancelled, etc.

          ShortWhen goal status took effect
          Comments

          Para ver la fecha de estados anteriores, consulta el historial.

          El recurso Goal no especifica claramente si Goal.statusDate se aplica a Goal.achievementStatus o a Goal.lifecycleStatus. Para un uso consistente en el contexto de SDOH, se recomienda que Goal.statusDate se sincronice con Goal.achievementStatus.


          To see the date for past statuses, query history.

          Control0..1
          Typedate
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          20. Goal.addresses
          Definition

          The identified conditions and other health record elements that are intended to be addressed by the goal.

          ShortIssues addressed by this goal
          Control0..*
          TypeReference(CL Condición-Diagnóstico, CL Observación, RiskAssessment, Condition, Observation, MedicationStatement, NutritionOrder, ServiceRequest)
          Is Modifierfalse
          Summaryfalse
          Requirements

          Allows specific goals to explicitly linked to the concerns they're dealing with - makes the goal more understandable.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Goal.addresses. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • profile @ resolve()
          • 22. Goal.addresses:SupportedAddresses
            Slice NameSupportedAddresses
            Definition

            The identified conditions and other health record elements that are intended to be addressed by the goal.

            ShortIssues addressed by this goal
            Control0..*
            TypeReference(Condición SDOHCC, Respuesta de Detección de Observación de SDOHCC, Evaluación de Observación de SDOHCC, Condition, Observation, MedicationStatement, NutritionOrder, ServiceRequest, RiskAssessment)
            Is Modifierfalse
            Must Supporttrue
            Must Support TypesNo must-support rules about the choice of types/profiles
            Summaryfalse
            Requirements

            Cuando una meta/objetivo aborda las observaciones de respuesta a la evaluación de SDOH generadas a partir de encuestas/cuestionarios, observaciones de evaluación de SDOH o condiciones de SDOH, Goal.addresses debe hacer una referencia a instancias que cumplan con los perfiles de Respuesta de Detección de Observación de SDOHCC, Condición SDOHCC, o Evaluación de Observación de SDOHCC. Sin embargo,también son posibles referencias a otros tipos de instancias.


            Allows specific goals to explicitly linked to the concerns they're dealing with - makes the goal more understandable.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. Goal.outcomeCode
            Definition

            Identifies the change (or lack of change) at the point when the status of the goal is assessed.

            ShortWhat result was achieved regarding the goal?
            Comments

            Ten en cuenta que esto no debe duplicar el estado de la meta/objetivo.

            La información representada por Goal.outcomeCode puede superponerse significativamente con la información representada por Goal.outcomeReference. Múltiples enfoques para representar la misma información puede afectar negativamente la interoperabilidad. Por lo tanto, donde haya una superposición significativa en la información proporcionada por Goal.outcomeCode y Goal.outcomeReference, se recomienda utilizar Goal.outcomeReference para proporcionar detalles sobre los resultados del objetivo.


            Note that this should not duplicate the goal status.

            Control0..*
            BindingThe codes SHOULD be taken from For example codes, see ValueSet SDOHCC LOINC-SNOMEDCThttp://hl7.org/fhir/ValueSet/clinical-findings
            (preferred to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetLOINCSNOMEDCT-CL)

            El resultado de la meta/objetivo; por ejemplo, "Seguridad alimentaria", "Tiene acceso a un automóvil".


            The result of the goal; e.g. "25% increase in shoulder mobility", "Anxiety reduced to moderate levels". "15 kg weight loss sustained over 6 months".

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Requirements

            Outcome tracking is a key aspect of care planning.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. Goal.outcomeReference
            Definition

            Details of what's changed (or not changed).

            ShortObservation that resulted from goal
            Comments

            El resultado de la meta/objetivo es independiente del resultado de las actividades relacionadas. Por ejemplo, si la meta/objetivo es alcanzar un peso corporal objetivo de 68 kg y se define una actividad en el plan de atención para hacer dieta, entonces el resultado de la actividad del plan de acción podría ser las calorías consumidas, mientras que el resultado del objetivo es una observación del peso corporal real medido.

            Además, consulta los comentarios de Goal.outcomeCode.


            The goal outcome is independent of the outcome of the related activities. For example, if the Goal is to achieve a target body weight of 150 lb and a care plan activity is defined to diet, then the care plan’s activity outcome could be calories consumed whereas goal outcome is an observation for the actual body weight measured.

            Control0..*
            TypeReference(Observation)
            Is Modifierfalse
            Summaryfalse
            Requirements

            Outcome tracking is a key aspect of care planning.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Goal.outcomeReference. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • profile @ resolve()
            • 28. Goal.outcomeReference:SupportedOutcomeReference
              Slice NameSupportedOutcomeReference
              Definition

              Details of what's changed (or not changed).

              ShortObservation that resulted from goal
              Comments

              The goal outcome is independent of the outcome of the related activities. For example, if the Goal is to achieve a target body weight of 150 lb and a care plan activity is defined to diet, then the care plan’s activity outcome could be calories consumed whereas goal outcome is an observation for the actual body weight measured.

              Control0..*
              TypeReference(Respuesta de Detección de Observación de SDOHCC, Evaluación de Observación de SDOHCC, Observation)
              Is Modifierfalse
              Must Supporttrue
              Must Support TypesNo must-support rules about the choice of types/profiles
              Summaryfalse
              Requirements

              Cuando un resultado de la meta/objetivo puede ser representado por observaciones de respuesta a evaluación de SDOH o observaciones de evaluación de SDOH, Goal.outcome debe hacer referencia a instancias que cumplan con los perfiles de Respuesta de Detección de Observación de SDOHCC o Evaluación de Observación de SDOHCC. Sin embargo, también son posibles referencias a otros tipos de instancias.


              Outcome tracking is a key aspect of care planning.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

              Guidance on how to interpret the contents of this table can be found here

              0. Goal
              Definition

              Para la representación de las metas/objetivos relacionados con los SDOH.

              ShortDescribe el(los) objetivo(s) relacionado(s) con los SDOH para un paciente.
              Comments

              Muchos de los perfiles SDOHCC se referencian entre sí. Un flujo respaldado por esta IG es que las Respuestas a cuestionarios resultan de Observaciones que pueden usarse como evidencia para Condiciones que pueden conducir a Metas/Objetivos, Solicitudes de servicio y Procedimientos. Sin embargo, también son posibles caminos alternativos.

              Control0..*
              Is Modifierfalse
              Summaryfalse
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              2. Goal.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              ShortLogical id of this artifact
              Comments

              The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

              Control0..1
              Typeid
              Is Modifierfalse
              Summarytrue
              4. Goal.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. Goal.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              8. Goal.language
              Definition

              The base language in which the resource is written.

              ShortLanguage of the resource content
              Comments

              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

              Control0..1
              BindingThe codes SHOULD be taken from CommonLanguages
              (preferred to http://hl7.org/fhir/ValueSet/languages)

              A human language.

              Additional BindingsPurpose
              AllLanguagesMax Binding
              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              10. Goal.text
              Definition

              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

              ShortText summary of the resource, for human interpretation
              Comments

              Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

              Control0..1
              TypeNarrative
              Is Modifierfalse
              Summaryfalse
              Alternate Namesnarrative, html, xhtml, display
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. Goal.contained
              Definition

              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

              ShortContained, inline Resources
              Comments

              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

              Control0..*
              TypeResource
              Is Modifierfalse
              Summaryfalse
              Alternate Namesinline resources, anonymous resources, contained resources
              14. Goal.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              16. Goal.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
              Summaryfalse
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              18. Goal.identifier
              Definition

              Business identifiers assigned to this goal by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

              ShortExternal Ids for this goal
              Comments

              This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Is Modifierfalse
              Summaryfalse
              Requirements

              Allows identification of the goal as it is known by various participating systems and in a way that remains consistent across servers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              20. Goal.lifecycleStatus
              Definition

              The state of the goal throughout its lifecycle.

              Shortproposed | planned | accepted | active | on-hold | completed | cancelled | entered-in-error | rejected
              Comments

              This element is labeled as a modifier because the lifecycleStatus contains codes that mark the resource as not currently valid.

              Control1..1
              BindingThe codes SHALL be taken from GoalLifecycleStatus
              (required to http://hl7.org/fhir/ValueSet/goal-status|4.0.1)

              Codes that reflect the current state of a goal and whether the goal is still being targeted.

              Typecode
              Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Allows knowing whether goal needs to be further tracked.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              22. Goal.achievementStatus
              Definition

              Describes the progression, or lack thereof, towards the goal against the target.

              Shortin-progress | improving | worsening | no-change | achieved | sustaining | not-achieved | no-progress | not-attainable
              Control0..1
              BindingThe codes SHOULD be taken from GoalAchievementStatus
              (preferred to http://hl7.org/fhir/ValueSet/goal-achievement)

              Indicates the progression, or lack thereof, towards the goal against the target.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              24. Goal.category
              Definition

              Indicates a category the goal falls within.

              ShortE.g. Treatment, dietary, behavioral, etc.
              Control0..*
              BindingFor example codes, see GoalCategory
              (example to http://hl7.org/fhir/ValueSet/goal-category)

              Codes for grouping and sorting goals.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows goals to be filtered and sorted.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Goal.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ $this
              • 26. Goal.category:SDOH
                Slice NameSDOH
                Definition

                Una categoría de SDOH asignada a la meta/objetivo.

                ShortPor ejemplo, inseguridad alimentaria | inseguridad en el transporte
                Control0..*
                BindingThe codes SHALL be taken from ValueSet SDOHCC para Categoría SDOH
                (required to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetSDOHCategoryCL)

                Códigos para categorías de SDOH de alto nivel.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Los códigos de este value set se pueden usar para asignar una o más categorías de SDOH (por ejemplo, inseguridad alimentaria, inseguridad en el transporte,etc.) a una meta/objetivo. Se recomienda utilizar códigos de categoría de SDOH para facilitar la búsqueda de metas/objetivos relacionados con SDOH.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. Goal.priority
                Definition

                Identifies the mutually agreed level of importance associated with reaching/sustaining the goal.

                Shorthigh-priority | medium-priority | low-priority
                Comments

                Extensions are available to track priorities as established by each participant (i.e. Priority from the patient's perspective, different practitioners' perspectives, family member's perspectives)

                The ordinal extension on Coding can be used to convey a numerically comparable ranking to priority. (Keep in mind that different coding systems may use a "low value=important".

                Control0..1
                BindingThe codes SHOULD be taken from GoalPriority
                (preferred to http://hl7.org/fhir/ValueSet/goal-priority)

                The level of importance associated with a goal.

                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Requirements

                Used for sorting and presenting goals.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                30. Goal.description
                Definition

                Human-readable and/or coded description of a specific desired objective of care, such as "control blood pressure" or "negotiate an obstacle course" or "dance with child at wedding".

                ShortCode or text describing goal
                Comments

                Si no hay código disponible, utiliza CodeableConcept.text.

                Control1..1
                BindingThe codes SHOULD be taken from ValueSet SDOHCC LOINC-SNOMEDCT
                (preferred to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetLOINCSNOMEDCT-CL)

                Códigos que proporcionan los detalles de un objetivo particular. En muchos sistemas, sólo se utilizará el elemento de texto.

                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Requirements

                Without a description of what's trying to be achieved, element has no purpose.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                32. Goal.subject
                Definition

                Identifica al paciente para el cual se está estableciendo la meta/objetivo.

                ShortWho this goal is intended for
                Control1..1
                TypeReference(Patient, Group, Organization)
                Is Modifierfalse
                Summarytrue
                Requirements

                Subject is optional to support annonymized reporting.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                34. Goal.start[x]
                Definition

                The date or event after which the goal should begin being pursued.

                ShortWhen goal pursuit begins
                Control0..1
                BindingFor example codes, see GoalStartEvent
                (example to http://hl7.org/fhir/ValueSet/goal-start-event)

                Codes describing events that can trigger the initiation of a goal.

                TypeChoice of: date, CodeableConcept
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Goals can be established prior to there being an intention to start pursuing them; e.g. Goals for post-surgical recovery established prior to surgery.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                36. Goal.target
                Definition

                Indicates what should be done by when.

                ShortTarget outcome for the goal
                Comments

                When multiple targets are present for a single goal instance, all targets must be met for the overall goal to be met.

                Control0..*
                This element is affected by the following invariants: gol-1
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Requirements

                Allows the progress of the goal to be monitored against an observation or due date. Target is 0..* to support Observations with multiple components, such as blood pressure goals with both a systolic and diastolic target.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                gol-1: Goal.target.measure is required if Goal.target.detail is populated ((detail.exists() and measure.exists()) or detail.exists().not())
                38. Goal.target.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                40. Goal.target.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                42. Goal.target.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                44. Goal.target.measure
                Definition

                The parameter whose value is being tracked, e.g. body weight, blood pressure, or hemoglobin A1c level.

                ShortThe parameter whose value is being tracked
                Control0..1
                This element is affected by the following invariants: gol-1
                BindingThe codes SHOULD be taken from ValueSet SDOHCC LOINC-SNOMEDCT
                (preferred to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetLOINCSNOMEDCT-CL)

                Códigos para identificar el valor que se está rastreando,por ejemplo, peso corporal, presión arterial o nivel de hemoglobina A1c.

                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                46. Goal.target.detail[x]
                Definition

                The target value of the focus to be achieved to signify the fulfillment of the goal, e.g. 150 pounds, 7.0%. Either the high or low or both values of the range can be specified. When a low value is missing, it indicates that the goal is achieved at any focus value at or below the high value. Similarly, if the high value is missing, it indicates that the goal is achieved at any focus value at or above the low value.

                ShortThe target value to be achieved
                Comments

                A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Goal.target.measure defines a coded value.

                Control0..1
                This element is affected by the following invariants: gol-1
                Binding

                Codes to identify the target value of the focus to be achieved to signify the fulfillment of the goal.

                TypeChoice of: Quantity, Range, CodeableConcept, string, boolean, integer, Ratio
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                48. Goal.target.due[x]
                Definition

                Indicates either the date or the duration after start by which the goal should be met.

                ShortReach goal on or before
                Control0..1
                TypeChoice of: date, Duration
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Identifies when the goal should be evaluated.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                50. Goal.statusDate
                Definition

                Identifies when the current status. I.e. When initially created, when achieved, when cancelled, etc.

                ShortWhen goal status took effect
                Comments

                Para ver la fecha de estados anteriores, consulta el historial.

                El recurso Goal no especifica claramente si Goal.statusDate se aplica a Goal.achievementStatus o a Goal.lifecycleStatus. Para un uso consistente en el contexto de SDOH, se recomienda que Goal.statusDate se sincronice con Goal.achievementStatus.

                Control0..1
                Typedate
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                52. Goal.statusReason
                Definition

                Captures the reason for the current status.

                ShortReason for current status
                Comments

                This will typically be captured for statuses such as rejected, on-hold or cancelled, but could be present for others.

                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                54. Goal.expressedBy
                Definition

                Indicates whose goal this is - patient goal, practitioner goal, etc.

                ShortWho's responsible for creating Goal?
                Comments

                This is the individual responsible for establishing the goal, not necessarily who recorded it. (For that, use the Provenance resource.).

                Control0..1
                TypeReference(Patient, Practitioner, PractitionerRole, RelatedPerson)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                56. Goal.addresses
                Definition

                The identified conditions and other health record elements that are intended to be addressed by the goal.

                ShortIssues addressed by this goal
                Control0..*
                TypeReference(CL Condición-Diagnóstico, CL Observación, RiskAssessment)
                Is Modifierfalse
                Summaryfalse
                Requirements

                Allows specific goals to explicitly linked to the concerns they're dealing with - makes the goal more understandable.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Goal.addresses. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • profile @ resolve()
                • 58. Goal.addresses:SupportedAddresses
                  Slice NameSupportedAddresses
                  Definition

                  The identified conditions and other health record elements that are intended to be addressed by the goal.

                  ShortIssues addressed by this goal
                  Control0..*
                  TypeReference(Condición SDOHCC, Respuesta de Detección de Observación de SDOHCC, Evaluación de Observación de SDOHCC)
                  Is Modifierfalse
                  Must Supporttrue
                  Must Support TypesNo must-support rules about the choice of types/profiles
                  Summaryfalse
                  Requirements

                  Cuando una meta/objetivo aborda las observaciones de respuesta a la evaluación de SDOH generadas a partir de encuestas/cuestionarios, observaciones de evaluación de SDOH o condiciones de SDOH, Goal.addresses debe hacer una referencia a instancias que cumplan con los perfiles de Respuesta de Detección de Observación de SDOHCC, Condición SDOHCC, o Evaluación de Observación de SDOHCC. Sin embargo,también son posibles referencias a otros tipos de instancias.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  60. Goal.note
                  Definition

                  Any comments related to the goal.

                  ShortComments about the goal
                  Comments

                  May be used for progress notes, concerns or other related information that doesn't actually describe the goal itself.

                  Control0..*
                  TypeAnnotation
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  There's a need to capture information about the goal that doesn't actually describe the goal.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  62. Goal.outcomeCode
                  Definition

                  Identifies the change (or lack of change) at the point when the status of the goal is assessed.

                  ShortWhat result was achieved regarding the goal?
                  Comments

                  Ten en cuenta que esto no debe duplicar el estado de la meta/objetivo.

                  La información representada por Goal.outcomeCode puede superponerse significativamente con la información representada por Goal.outcomeReference. Múltiples enfoques para representar la misma información puede afectar negativamente la interoperabilidad. Por lo tanto, donde haya una superposición significativa en la información proporcionada por Goal.outcomeCode y Goal.outcomeReference, se recomienda utilizar Goal.outcomeReference para proporcionar detalles sobre los resultados del objetivo.

                  Control0..*
                  BindingThe codes SHOULD be taken from ValueSet SDOHCC LOINC-SNOMEDCT
                  (preferred to https://hl7chile.cl/fhir/ig/gravitycl/ValueSet/SDOHCC-ValueSetLOINCSNOMEDCT-CL)

                  El resultado de la meta/objetivo; por ejemplo, "Seguridad alimentaria", "Tiene acceso a un automóvil".

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Outcome tracking is a key aspect of care planning.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  64. Goal.outcomeReference
                  Definition

                  Details of what's changed (or not changed).

                  ShortObservation that resulted from goal
                  Comments

                  El resultado de la meta/objetivo es independiente del resultado de las actividades relacionadas. Por ejemplo, si la meta/objetivo es alcanzar un peso corporal objetivo de 68 kg y se define una actividad en el plan de atención para hacer dieta, entonces el resultado de la actividad del plan de acción podría ser las calorías consumidas, mientras que el resultado del objetivo es una observación del peso corporal real medido.

                  Además, consulta los comentarios de Goal.outcomeCode.

                  Control0..*
                  TypeReference(Observation)
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Outcome tracking is a key aspect of care planning.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Goal.outcomeReference. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • profile @ resolve()
                  • 66. Goal.outcomeReference:SupportedOutcomeReference
                    Slice NameSupportedOutcomeReference
                    Definition

                    Details of what's changed (or not changed).

                    ShortObservation that resulted from goal
                    Comments

                    The goal outcome is independent of the outcome of the related activities. For example, if the Goal is to achieve a target body weight of 150 lb and a care plan activity is defined to diet, then the care plan’s activity outcome could be calories consumed whereas goal outcome is an observation for the actual body weight measured.

                    Control0..*
                    TypeReference(Respuesta de Detección de Observación de SDOHCC, Evaluación de Observación de SDOHCC)
                    Is Modifierfalse
                    Must Supporttrue
                    Must Support TypesNo must-support rules about the choice of types/profiles
                    Summaryfalse
                    Requirements

                    Cuando un resultado de la meta/objetivo puede ser representado por observaciones de respuesta a evaluación de SDOH o observaciones de evaluación de SDOH, Goal.outcome debe hacer referencia a instancias que cumplan con los perfiles de Respuesta de Detección de Observación de SDOHCC o Evaluación de Observación de SDOHCC. Sin embargo, también son posibles referencias a otros tipos de instancias.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))