Guide d'implémentation du médicament
0.1.0 - ci-build
Guide d'implémentation du médicament
0.1.0 - ci-build
Guide d'implémentation du médicament, published by Interop'Santé. This guide is not an authorized publication; it is the continuous build for version 0.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/Interop-Sante/hl7.fhir.fr.medication/ and changes regularly. See the Directory of published versions
| Draft as of 2021-10-18 |
Definitions for the FrRangeUcum data type profile.
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| Definition | A set of ordered Quantities defined by a precise low and high limit defined by a fixed quantity (no comparator) with UCUM unit |
| Short | Set of values bounded by precise low and high fixed quantity (no comparator) with UCUM unit |
| Comments | The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. Low and high limit are precisely defined, no element 'comparator' in the simpleQuantity defining each bound. The limits are defined by a fixed quantity (no comparator) with UCUM unit. |
| 2. Range.low | |
| Definition | unit of measure SHALL be UCUM encoded |
| Short | low bound with UCUM unit |
| Type | Quantity(SimpleQuantity with UCUM quantity unit) |
| Requirements | force UCUM unit encoding |
| 4. Range.high | |
| Definition | unit of measure SHALL be UCUM encoded |
| Short | high bound with UCUM unit |
| Type | Quantity(SimpleQuantity with UCUM quantity unit) |
| Requirements | force UCUM unit encoding |
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| Definition | A set of ordered Quantities defined by a precise low and high limit defined by a fixed quantity (no comparator) with UCUM unit A set of ordered Quantities defined by a low and high limit. |
| Short | Set of values bounded by precise low and high fixed quantity (no comparator) with UCUM unitSet of values bounded by low and high |
| Comments | The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. Low and high limit are precisely defined, no element 'comparator' in the simpleQuantity defining each bound. The limits are defined by a fixed quantity (no comparator) with UCUM unit. The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) rng-2: If present, low SHALL have a lower value than high ( low.empty() or high.empty() or (low <= high))rng-2: If present, low SHALL have a lower value than high (low.empty() or high.empty() or (low <= high)) |
| 2. Range.low | |
| Definition | unit of measure SHALL be UCUM encoded The low limit. The boundary is inclusive. |
| Short | low bound with UCUM unitLow limit |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use explicitely excludes the use of the simpleQuantity "comparator" element. If the low element is missing, the low boundary is not known. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(SimpleQuantity with UCUM quantity unit, SimpleQuantity) |
| Is Modifier | false |
| Requirements | force UCUM unit encoding |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |
| 4. Range.high | |
| Definition | unit of measure SHALL be UCUM encoded The high limit. The boundary is inclusive. |
| Short | high bound with UCUM unitHigh limit |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use explicitely excludes the use of the simpleQuantity "comparator" element. If the high element is missing, the high boundary is not known. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(SimpleQuantity with UCUM quantity unit, SimpleQuantity) |
| Is Modifier | false |
| Requirements | force UCUM unit encoding |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| Definition | A set of ordered Quantities defined by a precise low and high limit defined by a fixed quantity (no comparator) with UCUM unit |
| Short | Set of values bounded by precise low and high fixed quantity (no comparator) with UCUM unit |
| Comments | The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. Low and high limit are precisely defined, no element 'comparator' in the simpleQuantity defining each bound. The limits are defined by a fixed quantity (no comparator) with UCUM unit. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))rng-2: If present, low SHALL have a lower value than high ( low.empty() or high.empty() or (low <= high)) |
| 2. Range.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Range.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Range.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Range.low | |
| Definition | unit of measure SHALL be UCUM encoded |
| Short | low bound with UCUM unit |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use explicitely excludes the use of the simpleQuantity "comparator" element. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(SimpleQuantity with UCUM quantity unit) |
| Is Modifier | false |
| Requirements | force UCUM unit encoding |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |
| 8. Range.high | |
| Definition | unit of measure SHALL be UCUM encoded |
| Short | high bound with UCUM unit |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use explicitely excludes the use of the simpleQuantity "comparator" element. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(SimpleQuantity with UCUM quantity unit) |
| Is Modifier | false |
| Requirements | force UCUM unit encoding |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |