The Evidence Resource provides a machine-interpretable expression of an evidence concept including the evidence variables (e.g., population, exposures/interventions, comparators, outcomes, measured variables, confounding variables), the statistics, and the certainty of this evidence.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. Contained resources may be a resource type defined in the FHIR specification, or an additional resource.

An Extension

The status of the processing for making the artifact publicly available, not necessarily the same as artifact status (Resource.status).

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The status of this summary. Enables tracking the life-cycle of the content.

Allows filtering of summaries that are appropriate for use versus not.

See guidance around (not) making local changes to elements here.

The lifecycle status of an artifact.

The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate evidence instances.

When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Assist in searching for appropriate content.

A population (e.g. disease or condition) that this Evidence is about. This Evidence is derived from or applies to this population.

For situations in which the goal is to support search for relevant populations, the suggested approach to completing Population useContext values is to use valueCodeableConcept with a concept describing a disease or condition. Where the population includes a combination of conditions, one may provide multiple useContext entries. An alternative for situations in which the goal is to associate the population with a defined group is to use valueReference with reference to a Group Resource.

Assist in searching for appropriate content.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

An intervention (e.g. medication or procedure) or exposure that this Evidence is about. This Evidence is about the effect(s) of this intervention.

For situations in which the goal is to support search for relevant interventions, the suggested approach to completing Intervention useContext values is to use valueCodeableConcept with a concept describing an intervention (such as a medication, procedure, or treatment protocol) or an exposure (for clinical questions about the effect of an exposure, such as alcohol intake or air pollution). Where the Evidence includes multiple interventions, one may provide multiple useContext entries.

Assist in searching for appropriate content.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

A control intervention (e.g. placebo, medication or procedure) or control exposure (e.g. usual care or absence of a stated exposure) that this Evidence is about. This Evidence is about the effect(s) of an intervention compared to this control intervention or this control exposure.

For situations in which the goal is to support search for relevant comparators, the suggested approach to completing Comparator useContext values is to use valueCodeableConcept with a concept describing a control intervention or exposure (such as placebo, standard care, usual care, absence of intervention, absence of an exposure, a medication, a procedure, or a treatment protocol).

Assist in searching for appropriate content.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

A control intervention (e.g. placebo, medication or procedure) or control exposure (e.g. usual care or absence of a stated exposure) that this Evidence is about. This Evidence is about the effect(s) of an intervention compared to this control intervention or this control exposure.

For situations in which the goal is to support search for relevant outcomes that are defined by concepts, the suggested approach to completing Outcome Measure useContext values is to use valueCodeableConcept with a concept describing an outcome measure (such as mortality, cure, headache, or adverse event). For situations in which the goal is to support search for relevant outcomes that are defined precisely, the suggested approach to completing Outcome Measure useContext values is to use valueReference with reference to an EvidenceVariable Resource.

Assist in searching for appropriate content.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

A population grouping by age that this Evidence is about. This Evidence is derived from or applies to a population with the specified age range.

For situations in which the goal is to support search for relevant populations by age groups that are defined categorically, the suggested approach to completing Age Range useContext values is to use valueCodeableConcept with a concept describing an age range (e.g. Adult, Adolescent, or Older adult). Where the population includes a combination of age range groups, one may provide multiple useContext entries. For situations in which the goal is to support search for relevant populations by age groups that are defined precisely, the suggested approach to completing Age Range useContext values is to use valueRange or valueQuantity.

Assist in searching for appropriate content.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

A population grouping by gender that this Evidence is about. This Evidence is derived from or applies to a population with the specified gender.

For situations in which the goal is to support search for relevant populations by gender and the classification of this Evidence is limited to a subset by gender, the suggested approach to completing Gender useContext values is to use valueCodeableConcept with a concept describing a gender. Where the population includes a combination of genders, one may provide multiple useContext entries.

Assist in searching for appropriate content.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate evidence instances.

When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Assist in searching for appropriate content.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

A population (e.g. disease or condition) that this Evidence is about. This Evidence is derived from or applies to this population.

For situations in which the goal is to support search for relevant populations, the suggested approach to completing Population useContext values is to use valueCodeableConcept with a concept describing a disease or condition. Where the population includes a combination of conditions, one may provide multiple useContext entries. An alternative for situations in which the goal is to associate the population with a defined group is to use valueReference with reference to a Group Resource.

An intervention (e.g. medication or procedure) or exposure that this Evidence is about. This Evidence is about the effect(s) of this intervention.

For situations in which the goal is to support search for relevant interventions, the suggested approach to completing Intervention useContext values is to use valueCodeableConcept with a concept describing an intervention (such as a medication, procedure, or treatment protocol) or an exposure (for clinical questions about the effect of an exposure, such as alcohol intake or air pollution). Where the Evidence includes multiple interventions, one may provide multiple useContext entries.

A control intervention (e.g. placebo, medication or procedure) or control exposure (e.g. usual care or absence of a stated exposure) that this Evidence is about. This Evidence is about the effect(s) of an intervention compared to this control intervention or this control exposure.

For situations in which the goal is to support search for relevant comparators, the suggested approach to completing Comparator useContext values is to use valueCodeableConcept with a concept describing a control intervention or exposure (such as placebo, standard care, usual care, absence of intervention, absence of an exposure, a medication, a procedure, or a treatment protocol).

A control intervention (e.g. placebo, medication or procedure) or control exposure (e.g. usual care or absence of a stated exposure) that this Evidence is about. This Evidence is about the effect(s) of an intervention compared to this control intervention or this control exposure.

For situations in which the goal is to support search for relevant outcomes that are defined by concepts, the suggested approach to completing Outcome Measure useContext values is to use valueCodeableConcept with a concept describing an outcome measure (such as mortality, cure, headache, or adverse event). For situations in which the goal is to support search for relevant outcomes that are defined precisely, the suggested approach to completing Outcome Measure useContext values is to use valueReference with reference to an EvidenceVariable Resource.

A population grouping by age that this Evidence is about. This Evidence is derived from or applies to a population with the specified age range.

For situations in which the goal is to support search for relevant populations by age groups that are defined categorically, the suggested approach to completing Age Range useContext values is to use valueCodeableConcept with a concept describing an age range (e.g. Adult, Adolescent, or Older adult). Where the population includes a combination of age range groups, one may provide multiple useContext entries. For situations in which the goal is to support search for relevant populations by age groups that are defined precisely, the suggested approach to completing Age Range useContext values is to use valueRange or valueQuantity.

A population grouping by gender that this Evidence is about. This Evidence is derived from or applies to a population with the specified gender.

For situations in which the goal is to support search for relevant populations by gender and the classification of this Evidence is limited to a subset by gender, the suggested approach to completing Gender useContext values is to use valueCodeableConcept with a concept describing a gender. Where the population includes a combination of genders, one may provide multiple useContext entries.

The Evidence Resource provides a machine-interpretable expression of an evidence concept including the evidence variables (e.g., population, exposures/interventions, comparators, outcomes, measured variables, confounding variables), the statistics, and the certainty of this evidence.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

IETF language tag for a human language

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. Contained resources may be a resource type defined in the FHIR specification, or an additional resource.

An Extension

The status of the processing for making the artifact publicly available, not necessarily the same as artifact status (Resource.status).

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

An absolute URI that is used to identify this evidence when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which an authoritative instance of this summary is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the summary is stored on different servers.

In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

Allows the evidence to be referenced by a single globally unique identifier.

A formal identifier that is used to identify this summary when it is represented in other formats, or referenced in a specification, model, design or an instance.

Allows externally provided and/or usable business identifiers to be easily associated with the module.

The identifier that is used to identify this version of the summary when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the summary author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence.

The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

Indicates the mechanism used to compare versions to determine which is more current.

If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 is newer, and a 0 if the version ordering can't successfully be determined.

A natural language name identifying the evidence. This name should be usable as an identifier for the module by machine processing applications such as code generation.

The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

A short, descriptive, user-friendly title for the summary.

Display of the suggested method of how to cite this Evidence.

The status of this summary. Enables tracking the life-cycle of the content.

Allows filtering of summaries that are appropriate for use versus not.

See guidance around (not) making local changes to elements here.

The lifecycle status of an artifact.

A Boolean value to indicate that this resource is authored for testing purposes (or education/evaluation/marketing) and no version of this resource will ever be intended for genuine usage.

Allows filtering of artifacts that are appropriate for use versus not. Experimental resources might include example instances in implementation guides, instances created solely for testing purposes, etc. If experimental is 'true' for any version of a resource, it should be true for all versions of the resource. (If experimental changes, then it is being misused or a resource that was never intended for real-world use has unexpectedly changed its purpose.).

Experimental resources are not expected to be stable and may well have breaking changes without a corresponding change to the 'version' element.

The date (and optionally time) when the summary was last significantly changed. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the summary changes.

The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the summary. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

See guidance around (not) making local changes to elements here.

The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.

The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

See guidance around (not) making local changes to elements here.

The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.

If specified, this date follows the original approval date.

See guidance around (not) making local changes to elements here.

Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.

An individiual, organization, or device primarily involved in the creation and maintenance of the content.

Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

The name of the organization or individual responsible for the release and ongoing maintenance of the evidence.

Usually an organization but may be an individual. The publisher (or steward) of the evidence is the organization or individual primarily responsible for the maintenance and upkeep of the evidence. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the evidence. This item SHOULD be populated unless the information is available from context.

Helps establish the "authority/credibility" of the evidence. May also allow for contact.

Contact details to assist a user in finding and communicating with the publisher.

Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

See guidance around (not) making local changes to elements here.

Who entered the data for the evidence.

The Evidence.recorder element is structured to support a name (with a string datatype) and contact point information for the recorder, and is not structured to support unique identifiers for the recorder. If detailed contributorship data is needed, then one can create a Citation Resource for the Evidence Resource.

An individiual, organization, or device primarily responsible for internal coherence of the content.

Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

An individiual, organization, or device primarily responsible for review of some aspect of the content.

Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

See guidance around (not) making local changes to elements here.

An individiual, organization, or device responsible for officially endorsing the content for use in some setting.

Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

See guidance around (not) making local changes to elements here.

The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate evidence instances.

When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Assist in searching for appropriate content.

A population (e.g. disease or condition) that this Evidence is about. This Evidence is derived from or applies to this population.

For situations in which the goal is to support search for relevant populations, the suggested approach to completing Population useContext values is to use valueCodeableConcept with a concept describing a disease or condition. Where the population includes a combination of conditions, one may provide multiple useContext entries. An alternative for situations in which the goal is to associate the population with a defined group is to use valueReference with reference to a Group Resource.

Assist in searching for appropriate content.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

An intervention (e.g. medication or procedure) or exposure that this Evidence is about. This Evidence is about the effect(s) of this intervention.

For situations in which the goal is to support search for relevant interventions, the suggested approach to completing Intervention useContext values is to use valueCodeableConcept with a concept describing an intervention (such as a medication, procedure, or treatment protocol) or an exposure (for clinical questions about the effect of an exposure, such as alcohol intake or air pollution). Where the Evidence includes multiple interventions, one may provide multiple useContext entries.

Assist in searching for appropriate content.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

A control intervention (e.g. placebo, medication or procedure) or control exposure (e.g. usual care or absence of a stated exposure) that this Evidence is about. This Evidence is about the effect(s) of an intervention compared to this control intervention or this control exposure.

For situations in which the goal is to support search for relevant comparators, the suggested approach to completing Comparator useContext values is to use valueCodeableConcept with a concept describing a control intervention or exposure (such as placebo, standard care, usual care, absence of intervention, absence of an exposure, a medication, a procedure, or a treatment protocol).

Assist in searching for appropriate content.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

A control intervention (e.g. placebo, medication or procedure) or control exposure (e.g. usual care or absence of a stated exposure) that this Evidence is about. This Evidence is about the effect(s) of an intervention compared to this control intervention or this control exposure.

For situations in which the goal is to support search for relevant outcomes that are defined by concepts, the suggested approach to completing Outcome Measure useContext values is to use valueCodeableConcept with a concept describing an outcome measure (such as mortality, cure, headache, or adverse event). For situations in which the goal is to support search for relevant outcomes that are defined precisely, the suggested approach to completing Outcome Measure useContext values is to use valueReference with reference to an EvidenceVariable Resource.

Assist in searching for appropriate content.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

A population grouping by age that this Evidence is about. This Evidence is derived from or applies to a population with the specified age range.

For situations in which the goal is to support search for relevant populations by age groups that are defined categorically, the suggested approach to completing Age Range useContext values is to use valueCodeableConcept with a concept describing an age range (e.g. Adult, Adolescent, or Older adult). Where the population includes a combination of age range groups, one may provide multiple useContext entries. For situations in which the goal is to support search for relevant populations by age groups that are defined precisely, the suggested approach to completing Age Range useContext values is to use valueRange or valueQuantity.

Assist in searching for appropriate content.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

A population grouping by gender that this Evidence is about. This Evidence is derived from or applies to a population with the specified gender.

For situations in which the goal is to support search for relevant populations by gender and the classification of this Evidence is limited to a subset by gender, the suggested approach to completing Gender useContext values is to use valueCodeableConcept with a concept describing a gender. Where the population includes a combination of genders, one may provide multiple useContext entries.

Assist in searching for appropriate content.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate evidence instances.

When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Assist in searching for appropriate content.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A code that identifies the type of context being specified by this usage context.

A code that specifies a type of context being specified by a usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A code that defines the specific value for the context being specified.

Explanation of why this Evidence is needed and why it has been designed as it has.

This element does not describe the usage of the Evidence. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this Evidence.

A copyright statement relating to the Evidence and/or its contents. Copyright statements are legal notices of intellectual property ownership and may include restrictions on the use and publishing of the Evidence.

The short copyright declaration (e.g. (c) '2015+ xyz organization' should be sent in the copyrightLabel element.

Consumers must be able to determine any legal restrictions on the use of the Evidence and/or its content.

A short string (<50 characters), suitable for inclusion in a page footer that identifies the copyright holder, effective period, and optionally whether rights are restricted. (e.g. 'All rights reserved', 'Some rights reserved').

The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.

Defines the content expected to be rendered in all representations of the artifact.

Relationships that this Evidence has with other FHIR or non-FHIR resources that already exist.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The type of relationship to the related artifact.

The type of relationship to the related artifact.

The artifact that is related to this Evidence Resource.

A natural language summary of the evidence.

This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the evidence as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the evidence is presumed to be the predominant language in the place the evidence was created).

Declarative description of the Evidence, such as conclusion or bottom line statement.

Footnotes and/or explanatory notes.

Description, classification, and definition of a single variable. The collection of variables defines what the evidence is about.

Comparative evidence is often defined with a population variable, an exposure variable and an outcome variable, while non comparative evidence is often defined with a population variable and an outcome variable.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A text description or summary of the variable.

Footnotes and/or explanatory notes.

Classification of the role of the variable.

The role that the variable plays.

Sub-classification of the role of the variable.

The sub-role that the variable plays.

The reference value used for comparison.

Value should match EvidenceVariable.category.name in the EvidenceVariable referenced in the observed or intended element.

Definition of the actual variable related to the statistic(s), i.e., the population being the actual study sample or the measured variable (exposure, outcome, or covariate) being the actual observation that occurred or will occur in the study.

Definition of the intended variable related to the Evidence, i.e., the population, exposure, or outcome for which the statistical finding is being interpreted.

Indication of quality of match between intended variable to actual variable.

The quality of how direct the match is.

The design of the synthesis (combination of studies) that produced this evidence. The design is described with any number of synthesis characteristics, such as type of meta-analysis.

Types of combining results from a body of evidence (e.g. summary data meta-analysis).

The design of the study that produced this evidence. The design is described with any number of study design characteristics.

This is a set of terms for study design characteristics.

Values and parameters for a single statistic.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A natural language summary of the statistic.

Footnotes and/or explanatory notes.

Type of statistic, e.g., relative risk. The statistic type is a classification that formally defines the relationship between the variables (noted in Evidence.variableDefinition) and the value specification (noted in Evidence.statistic.quantity).

When the measured variable (outcome) is handled categorically, the category element is used to define which category the statistic is reporting.

Simple strings can be used for descriptive purposes. Exact matching to EvidenceVariable.category.name for the Evidence.variableDefinition[variableRole=outcome].observed=Reference(EvidenceVariable) could facilitate validation within datasets.

Statistic value.

The number of events associated with the statistic, where the unit of analysis is different from numberAffected, sampleSize.knownDataCount and sampleSize.numberOfParticipants.

When the number of events is the statistic, use Evidence.statistic.quantity and set Evidence.statistic.type.coding.code=C25463 and Evidence.statistic.type.coding.display=Count. When the statistic is an Event Rate (where individual participants may have 2 or more events), use Evidence.statistic.numberOfEvents to record the total number of events rather than the number of participants with events.

The number of participants affected where the unit of analysis is the same as sampleSize.knownDataCount and sampleSize.numberOfParticipants.

When the number affected is the statistic, use Evidence.statistic.quantity and set Evidence.statistic.type.coding.code=C25463 and Evidence.statistic.type.coding.display=Count. When the statistic is a Proportion, use Evidence.statistic.numberAffected and enter an integer as the value. When the statistic is an Event Rate (where individual participants may have 2 or more events), use Evidence.statistic.numberAffected to record the number of participants with events rather than the total number of events.

Count of participants in the study sample.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Human-readable summary of study sample size. A human-readable string to clarify or explain concepts about the sample size.