Australian Digital Health Agency FHIR Implementation Guide, published by Australian Digital Health Agency. This guide is not an authorized publication; it is the continuous build for version 1.2.0-ci-build built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/AuDigitalHealth/ci-fhir-r4/ and changes regularly. See the Directory of published versions

Resource Profile: ADHAPatientDemographics - Detailed Descriptions

Draft as of 2024-12-19

Definitions for the dh-patient-demographics-1 resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Patient
ShortA patient in the context of electronic exchange of health information
Invariantsinv-dh-pat-01: At least one patient identifier shall be valid (identifier.where(system.count() + value.count() >1).exists())
inv-dh-pat-03: If present, a general practitioner shall at least have a reference, an identifier or a display (generalPractitioner.exists() implies generalPractitioner.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
2. Patient.extension:birthPlace
Slice NamebirthPlace
Must Supporttrue
4. Patient.extension:indigenousStatus
Slice NameindigenousStatus
Must Supporttrue
6. Patient.extension:mothersMaidenName
Slice NamemothersMaidenName
Must Supporttrue
8. Patient.extension:interpreterRequired
Slice NameinterpreterRequired
Must Supporttrue
10. Patient.extension:dateOfArrival
Slice NamedateOfArrival
ShortYear of Arrival
Must Supporttrue
12. Patient.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..?
This element is affected by the following invariants: inv-dh-pat-01
Must Supporttrue
14. Patient.active
Fixed Valuetrue
16. Patient.name
Control1..?
Must Supporttrue
18. Patient.telecom
Must Supporttrue
20. Patient.gender
Must Supporttrue
22. Patient.birthDate
Must Supporttrue
LOINC Code
24. Patient.birthDate.extension:accuracyIndicator
Slice NameaccuracyIndicator
Must Supporttrue
26. Patient.birthDate.extension:birthTime
Slice NamebirthTime
Must Supporttrue
28. Patient.deceased[x]
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
30. Patient.deceasedBoolean:deceasedBoolean
Slice NamedeceasedBoolean
Must Supporttrue
32. Patient.deceasedDateTime:deceasedDateTime
Slice NamedeceasedDateTime
Must Supporttrue
34. Patient.deceasedDateTime:deceasedDateTime.extension:accuracyIndicator
Slice NameaccuracyIndicator
Must Supporttrue
36. Patient.address
Must Supporttrue
38. Patient.maritalStatus
Must Supporttrue
40. Patient.multipleBirth[x]
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
42. Patient.contact
Must Supporttrue
Invariantsinv-dh-pat-05: If present, a contact's organisation shall at least have a reference, an identifier or a display (organization.exists() implies (organization.reference.exists() or organization.identifier.exists() or organization.display.exists()))
44. Patient.contact.relationship
Must Supporttrue
46. Patient.contact.name
Must Supporttrue
48. Patient.contact.telecom
Must Supporttrue
50. Patient.contact.address
Must Supporttrue
52. Patient.contact.gender
Must Supporttrue
54. Patient.contact.organization
TypeReference(ADHA Core Organization)
Must Supporttrue
56. Patient.communication
Must Supporttrue
58. Patient.communication.language
Must Supporttrue
60. Patient.communication.preferred
Must Supporttrue
62. Patient.generalPractitioner
TypeReference(ADHA Core Organization, ADHA Core PractitionerRole)
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles

Guidance on how to interpret the contents of this table can be found here

0. Patient
Definition

Demographics and other administrative information about an individual receiving care or other health-related services.


Demographics and other administrative information about an individual or animal receiving care or other health-related services.

ShortA patient in the context of electronic exchange of health informationInformation about an individual or animal receiving health care services
Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesSubjectOfCare Client Resident
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
inv-pat-0: If present, birth time's date shall be the birth date (birthDate.extension('http://hl7.org/fhir/StructureDefinition/patient-birthTime').exists() implies birthDate.extension('http://hl7.org/fhir/StructureDefinition/patient-birthTime').value.toString().substring(0,10) = birthDate.toString())
inv-pat-1: Individual gender identity shall be a member of the Gender Identity Response value set if any codes within that value set can apply (extension('http://hl7.org/fhir/StructureDefinition/individual-genderIdentity').empty() or extension('http://hl7.org/fhir/StructureDefinition/individual-genderIdentity').all(extension('value').value.memberOf('https://healthterminologies.gov.au/fhir/ValueSet/gender-identity-response-1')))
inv-pat-2: Individual pronouns shall be a member of the Australian Pronouns value set if any codes within that value set can apply (extension('http://hl7.org/fhir/StructureDefinition/individual-pronouns').empty() or extension('http://hl7.org/fhir/StructureDefinition/individual-pronouns').all(extension('value').value.memberOf('https://healthterminologies.gov.au/fhir/ValueSet/australian-pronouns-1')))
inv-pat-3: Recorded sex or gender type shall be a member of the AU Recorded Sex or Gender Type value set if any codes within that value set can apply (extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').extension('type').empty() or extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').all(extension('type').value.memberOf('http://terminology.hl7.org.au/ValueSet/rsg-type')))
inv-pat-4: Recorded sex or gender source document type shall be a member of the AU Recorded Sex or Gender (RSG) Source Document Type value set if any codes within that value set can apply (extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').extension('sourceDocument').empty() or extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').all(extension('sourceDocument').value.memberOf('http://terminology.hl7.org.au/ValueSet/rsg-source-document-type')))
inv-pat-5: Recorded sex or gender jurisdiction shall be a member of the Jurisdiction ValueSet - AU Extended value set if any codes within that value set can apply (extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').extension('jurisdiction').empty() or extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').all(extension('jurisdiction').value.memberOf('http://terminology.hl7.org.au/ValueSet/jurisdiction-extended')))
inv-dh-pat-01: At least one patient identifier shall be valid (identifier.where(system.count() + value.count() >1).exists())
inv-dh-pat-03: If present, a general practitioner shall at least have a reference, an identifier or a display (generalPractitioner.exists() implies generalPractitioner.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
2. Patient.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Patient.extension:birthPlace
Slice NamebirthPlace
Definition

The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

ShortPlace of Birth for patient
Control0..1
TypeExtension(Patient Birth Place) (Extension Type: Address)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Patient.extension:indigenousStatus
Slice NameindigenousStatus
Definition

National Health Data Dictionary (NHDD) based indigenous status for a person.

ShortIndigenous status
Comments

This concept is equivalent to Australian Institute of Health and Welfare data element 602543 Person—Indigenous status, code N.

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Australian Indigenous Status) (Extension Type: Coding)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Patient.extension:veteranStatus
Slice NameveteranStatus
Definition

Veteran / Australian Defence Force (ADF) status for a person.

ShortVeteran / Australian Defence Force (ADF) status
Comments

This concept is equivalent to Australian Institute of Health and Welfare data element 737931 Person—ADF veteran status, code N.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(Australian Veteran Status) (Extension Type: Coding)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Patient.extension:closingTheGapRegistration
Slice NameclosingTheGapRegistration
Definition

Indication of eligibility for the Closing the Gap co-payment.

ShortClosing the Gap co-payment eligibility indicator
Comments

This concept is equivalent to Australian Institute of Health and Welfare data element 603671 Patient—Closing the Gap co-payment eligibility indicator.

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Closing the Gap Registration) (Extension Type: boolean)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Patient.extension:mothersMaidenName
Slice NamemothersMaidenName
Definition

Mother's maiden (unmarried) name, commonly collected to help verify patient identity.

ShortMother's Maiden name
Control0..1
TypeExtension(Patient Mother's Maiden Name) (Extension Type: string)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Patient.extension:interpreterRequired
Slice NameinterpreterRequired
Definition

This Patient requires an interpreter to communicate healthcare information to the practitioner.

ShortWhether the patient needs an interpreter
Comments

The Patient does not speak the default language of the organization, and hence requires an interpreter. If the patient has other languages in the Communications list, then that would be the type of interpreter required.

Control0..1
TypeExtension(Patient Interpreter Required) (Extension Type: boolean)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Patient.extension:dateOfArrival
Slice NamedateOfArrival
Definition

The date a person first arrived in Australia, from another country, with the intention of living in Australia for one year or more. This date is captured once for a person and is not subsequently updated with subsequent arrivals.

ShortYear of Arrival
Comments

See Australian Bureau of Statics (ABS) 1200.0.55.007 - Year of Arrival Standard, 2014, Version 1.5 for further information. This concept is equivalent to Australian Institute of Health and Welfare data element 269447 Person—year of first arrival in Australia.

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Date of Arrival in Australia) (Extension Type: date)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Patient.extension:genderIdentity
Slice NamegenderIdentity
Definition

An individual's personal sense of being a man, woman, boy, girl, nonbinary, or something else.

ShortGender identity shall be a member of the Gender Identity Response value set if any codes within that value set can apply
Comments

Individual Gender identity Gender Identity Response (Extensible). See Australian Bureau of Statics (ABS) Standard for Sex, Gender, Variations of Sex Characteristics and Sexual Orientation Variables, 2020 for further materials.

Control0..*
This element is affected by the following invariants: inv-pat-1
TypeExtension(Individual Gender Identity) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Patient.extension:individualPronouns
Slice NameindividualPronouns
Definition

The pronouns to use when referring to an individual in verbal or written communication.

ShortPronouns shall be a member of the Australian Pronouns value set if any codes within that value set can apply
Comments

Individual Pronouns Australian Pronouns (Extensible).

Control0..*
This element is affected by the following invariants: inv-pat-2
TypeExtension(Individual Pronouns) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Patient.extension:recordedSexOrGender
Slice NamerecordedSexOrGender
Definition

A sex or gender property for the individual from a document or other record

ShortRecorded sex or gender type shall be a member of the AU Recorded Sex or Gender Type value set if any codes within that value set can apply. Recorded sex or gender source document type shall be a member of the AU Recorded Sex or Gender (RSG) Source Document Type value set if any codes within that value set can apply. Recorded sex or gender jurisdiction shall be a member of the Jurisdiction - ValueSet AU Extended value set if any codes within that value set can apply
Comments

Person Recorded Sex Or Gender type AU Recorded Sex or Gender Type (extensible). Person Recorded Sex Or Gender source document AU Recorded Sex or Gender (RSG) Source Document Type (extensible). Person Recorded Sex Or Gender jurisdiction Jurisdiction ValueSet - AU Extended (extensible).

Control0..*
This element is affected by the following invariants: inv-pat-3, inv-pat-4, inv-pat-5
TypeExtension(Person Recorded Sex Or Gender) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Patient.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
26. Patient.identifier
Definition

An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.


An identifier for this patient.

ShortIdentifies this patient across multiple systemsAn identifier for this patient
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
This element is affected by the following invariants: ele-1, inv-dh-pat-01
TypeIdentifier(Identifier, AU IHI, AU Medicare Card Number, AU DVA Number, AU Health Care Card Number, AU Pensioner Concession Card Number, AU Commonwealth Seniors Health Card Number, AU Medical Record Number, AU Insurance Member Number)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Requirements

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Patient.active
Definition

Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

It is often used to filter patient lists to exclude inactive patients

Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

ShortWhether this patient's record is in active use
Comments

If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to mark a patient record as not to be used because it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Fixed Valuetrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Patient.name
Definition

A name associated with the individual.

ShortA name associated with the patient
Comments

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control10..*
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Patient.telecom
Definition

A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

ShortA contact detail for the individual
Comments

A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

Control0..*
TypeContactPoint
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

People have (primary) ways to contact them in some way such as phone, email.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Patient.gender
Definition

Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

Shortmale | female | other | unknown
Comments

The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

Control0..1
BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
(required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

The gender of a person used for administrative purposes.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Needed for identification of the individual, in combination with (at least) name and birth date.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Patient.birthDate
Definition

The date of birth for the individual.

ShortDate of birth extended for time and accuracy indicatorThe date of birth for the individual
Comments

At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

Control0..1
This element is affected by the following invariants: inv-pat-0
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Age of the individual drives many clinical processes. May include accuracy indicator and specific birth time.


Age of the individual drives many clinical processes.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
LOINC Code21112-8
38. Patient.birthDate.extension:accuracyIndicator
Slice NameaccuracyIndicator
Definition

General date accuracy indicator coding.

ShortDate accuracy indicator
Comments

In some circumstances, systems may capture date or dateTime data that has unknown or estimated parts. This coding indicates the accuracy of the day, month and year parts. This concept is equivalent to Australian Institute of Health and Welfare data element 294418 Date—accuracy indicator.

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Date Accuracy Indicator) (Extension Type: Coding)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
40. Patient.birthDate.extension:birthTime
Slice NamebirthTime
Definition

The time of day that the Patient was born. This includes the date to ensure that the timezone information can be communicated effectively.

ShortTime of day of birth
Control0..1
This element is affected by the following invariants: inv-pat-0
TypeExtension(Patient Birth Time) (Extension Type: dateTime)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
42. Patient.deceased[x]
Definition

Indicates if the individual is deceased or not. Deceased date accuracy indicator is optional.


Indicates if the individual is deceased or not.

ShortIndicates if the individual is deceased or not
Comments

If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

Control0..1
TypeChoice of: boolean, dateTime
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Patient.deceased[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
  • 44. Patient.deceased[x]:deceasedBoolean
    Slice NamedeceasedBoolean
    Definition

    Boolean indicator if the individual is deceased or not.


    Indicates if the individual is deceased or not.

    ShortDeceased indicatorIndicates if the individual is deceased or not
    Comments

    If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

    Control0..1
    Typeboolean, dateTime
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Patient.deceased[x]:deceasedDateTime
    Slice NamedeceasedDateTime
    Definition

    Individual deceased date-time with optional accuracy indicator.


    Indicates if the individual is deceased or not.

    ShortDeceased date timeIndicates if the individual is deceased or not
    Comments

    If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

    Control0..1
    TypedateTime, boolean
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    48. Patient.deceased[x]:deceasedDateTime.extension:accuracyIndicator
    Slice NameaccuracyIndicator
    Definition

    General date accuracy indicator coding.

    ShortDate accuracy indicator
    Comments

    In some circumstances, systems may capture date or dateTime data that has unknown or estimated parts. This coding indicates the accuracy of the day, month and year parts. This concept is equivalent to Australian Institute of Health and Welfare data element 294418 Date—accuracy indicator.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Date Accuracy Indicator) (Extension Type: Coding)
    Is Modifierfalse
    Must Supporttrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    50. Patient.address
    Definition

    An Australian address expressed using postal conventions (as opposed to GPS or other location definition formats).


    An address for the individual.

    ShortAn address for the individual
    Comments

    The address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).


    Patient may have multiple addresses with different uses or applicable periods.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeAddress(Australian Address, Address)
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Requirements

    May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    inv-add-0: The address shall at least have text or a line (text.exists() or line.exists())
    inv-add-1: If asserting no fixed address, the type shall be 'physical' (extension('http://hl7.org.au/fhir/StructureDefinition/no-fixed-address').exists() implies type='physical')
    inv-add-2: If asserting no fixed address, the address text shall begin with 'NO FIXED ADDRESS' (extension('http://hl7.org.au/fhir/StructureDefinition/no-fixed-address').exists() implies text.startsWith('NO FIXED ADDRESS'))
    52. Patient.maritalStatus
    Definition

    This field contains a patient's most recent marital (civil) status.

    ShortMarital (civil) status of a patient
    Control0..1
    BindingUnless not suitable, these codes SHALL be taken from Marital Status Codeshttp://hl7.org/fhir/ValueSet/marital-status
    (extensible to http://hl7.org/fhir/ValueSet/marital-status)

    The domestic partnership status of a person.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Most, if not all systems capture it.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Patient.multipleBirth[x]
    Definition

    Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

    ShortWhether patient is part of a multiple birth
    Comments

    Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

    Control0..1
    TypeChoice of: boolean, integer
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summaryfalse
    Requirements

    For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Patient.contact
    Definition

    A contact party (e.g. guardian, partner, friend) for the patient.

    ShortA contact party (e.g. guardian, partner, friend) for the patient
    Comments

    Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Need to track people you can contact about the patient.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
    inv-dh-pat-05: If present, a contact's organisation shall at least have a reference, an identifier or a display (organization.exists() implies (organization.reference.exists() or organization.identifier.exists() or organization.display.exists()))
    pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
    58. Patient.contact.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    60. Patient.contact.relationship
    Definition

    The nature of the relationship between the patient and the contact person.

    ShortThe kind of relationship
    Control0..*
    BindingUnless not suitable, these codes SHALL be taken from Contact Relationship Type .http://hl7.org/fhir/ValueSet/patient-contactrelationship
    (extensible to https://healthterminologies.gov.au/fhir/ValueSet/contact-relationship-type-3)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Used to determine which contact person is the most relevant to approach, depending on circumstances.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    62. Patient.contact.name
    Definition

    A name associated with the contact person.

    ShortA name associated with the contact person
    Control0..1
    TypeHumanName
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    64. Patient.contact.telecom
    Definition

    A contact detail for the person, e.g. a telephone number or an email address.

    ShortA contact detail for the person
    Comments

    Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

    Control0..*
    TypeContactPoint
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    People have (primary) ways to contact them in some way such as phone, email.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    66. Patient.contact.address
    Definition

    An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.


    Address for the contact person.

    ShortAddress for the contact person
    Comments

    The address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeAddress(Address, Australian Address)
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Requirements

    Need to keep track where the contact person can be contacted per postal mail or visited.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    68. Patient.contact.gender
    Definition

    Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

    Shortmale | female | other | unknown
    Control0..1
    BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
    (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

    The gender of a person used for administrative purposes.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Needed to address the person correctly.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    70. Patient.contact.organization
    Definition

    Organization on behalf of which the contact is acting or for which the contact is working.

    ShortOrganization that is associated with the contact
    Control0..1
    This element is affected by the following invariants: pat-1
    TypeReference(ADHA Core Organization, Organization)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    For guardians or business related contacts, the organization is relevant.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    72. Patient.communication
    Definition

    A language which may be used to communicate with the patient about his or her health.

    ShortA language which may be used to communicate with the patient about his or her health
    Comments

    If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    74. Patient.communication.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    76. Patient.communication.language
    Definition

    The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

    ShortThe language which can be used to communicate with the patient about his or her health
    Comments

    The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from Common Languages in Australia .http://hl7.org/fhir/ValueSet/languages
    (extensible to https://healthterminologies.gov.au/fhir/ValueSet/common-languages-australia-2)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    78. Patient.communication.preferred
    Definition

    Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

    ShortLanguage preference indicator
    Comments

    This language is specifically identified for communicating healthcare information.

    Control0..1
    Typeboolean
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    80. Patient.generalPractitioner
    Definition

    Patient's nominated care provider.

    ShortPatient's nominated primary care provider
    Comments

    This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

    Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

    Control0..*
    This element is affected by the following invariants: inv-dh-pat-03
    TypeReference(ADHA Core Organization, ADHA Core PractitionerRole, Organization, Practitioner, PractitionerRole)
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summaryfalse
    Alternate NamescareProvider
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    82. Patient.link
    Definition

    Link to a Patient or RelatedPerson resource that concerns the same actual person.


    Link to another patient resource that concerns the same actual patient.

    ShortLink to a Patient or RelatedPerson resource that concerns the same actual personLink to another patient resource that concerns the same actual person
    Comments

    There is no assumption that linked patient records have mutual links.

    Control0..*
    TypeBackboneElement
    Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
    Summarytrue
    Requirements

    There are multiple use cases:

    • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
    • Distribution of patient information across multiple servers.
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    84. Patient.link.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    86. Patient.link.other
    Definition

    The other patient resource that the link refers to.

    ShortThe other patient or related person resource that the link refers to
    Comments

    Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

    Control1..1
    TypeReference(Patient, RelatedPerson)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    88. Patient.link.type
    Definition

    The type of link between this patient resource and another patient resource.

    Shortreplaced-by | replaces | refer | seealso
    Control1..1
    BindingThe codes SHALL be taken from LinkTypehttp://hl7.org/fhir/ValueSet/link-type|4.0.1
    (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

    The type of link between this patient resource and another patient resource.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. Patient
    Definition

    Demographics and other administrative information about an individual receiving care or other health-related services.

    ShortA patient in the context of electronic exchange of health information
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Alternate NamesSubjectOfCare Client Resident
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    inv-pat-0: If present, birth time's date shall be the birth date (birthDate.extension('http://hl7.org/fhir/StructureDefinition/patient-birthTime').exists() implies birthDate.extension('http://hl7.org/fhir/StructureDefinition/patient-birthTime').value.toString().substring(0,10) = birthDate.toString())
    inv-pat-1: Individual gender identity shall be a member of the Gender Identity Response value set if any codes within that value set can apply (extension('http://hl7.org/fhir/StructureDefinition/individual-genderIdentity').empty() or extension('http://hl7.org/fhir/StructureDefinition/individual-genderIdentity').all(extension('value').value.memberOf('https://healthterminologies.gov.au/fhir/ValueSet/gender-identity-response-1')))
    inv-pat-2: Individual pronouns shall be a member of the Australian Pronouns value set if any codes within that value set can apply (extension('http://hl7.org/fhir/StructureDefinition/individual-pronouns').empty() or extension('http://hl7.org/fhir/StructureDefinition/individual-pronouns').all(extension('value').value.memberOf('https://healthterminologies.gov.au/fhir/ValueSet/australian-pronouns-1')))
    inv-pat-3: Recorded sex or gender type shall be a member of the AU Recorded Sex or Gender Type value set if any codes within that value set can apply (extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').extension('type').empty() or extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').all(extension('type').value.memberOf('http://terminology.hl7.org.au/ValueSet/rsg-type')))
    inv-pat-4: Recorded sex or gender source document type shall be a member of the AU Recorded Sex or Gender (RSG) Source Document Type value set if any codes within that value set can apply (extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').extension('sourceDocument').empty() or extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').all(extension('sourceDocument').value.memberOf('http://terminology.hl7.org.au/ValueSet/rsg-source-document-type')))
    inv-pat-5: Recorded sex or gender jurisdiction shall be a member of the Jurisdiction ValueSet - AU Extended value set if any codes within that value set can apply (extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').extension('jurisdiction').empty() or extension('http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender').all(extension('jurisdiction').value.memberOf('http://terminology.hl7.org.au/ValueSet/jurisdiction-extended')))
    inv-dh-pat-01: At least one patient identifier shall be valid (identifier.where(system.count() + value.count() >1).exists())
    inv-dh-pat-03: If present, a general practitioner shall at least have a reference, an identifier or a display (generalPractitioner.exists() implies generalPractitioner.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
    2. Patient.id
    Definition

    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

    ShortLogical id of this artifact
    Comments

    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

    Control0..1
    Typeid
    Is Modifierfalse
    Summarytrue
    4. Patient.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    TypeMeta
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Patient.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Patient.language
    Definition

    The base language in which the resource is written.

    ShortLanguage of the resource content
    Comments

    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

    Control0..1
    BindingThe codes SHOULD be taken from CommonLanguages
    (preferred to http://hl7.org/fhir/ValueSet/languages)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Patient.text
    Definition

    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

    ShortText summary of the resource, for human interpretation
    Comments

    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

    Control0..1
    TypeNarrative
    Is Modifierfalse
    Summaryfalse
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Patient.contained
    Definition

    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

    ShortContained, inline Resources
    Comments

    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

    Control0..*
    TypeResource
    Is Modifierfalse
    Summaryfalse
    Alternate Namesinline resources, anonymous resources, contained resources
    14. Patient.extension
    Definition

    An Extension

    ShortExtension
    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 16. Patient.extension:birthPlace
      Slice NamebirthPlace
      Definition

      The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

      ShortPlace of Birth for patient
      Control0..1
      TypeExtension(Patient Birth Place) (Extension Type: Address)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. Patient.extension:indigenousStatus
      Slice NameindigenousStatus
      Definition

      National Health Data Dictionary (NHDD) based indigenous status for a person.

      ShortIndigenous status
      Comments

      This concept is equivalent to Australian Institute of Health and Welfare data element 602543 Person—Indigenous status, code N.

      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Australian Indigenous Status) (Extension Type: Coding)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      20. Patient.extension:veteranStatus
      Slice NameveteranStatus
      Definition

      Veteran / Australian Defence Force (ADF) status for a person.

      ShortVeteran / Australian Defence Force (ADF) status
      Comments

      This concept is equivalent to Australian Institute of Health and Welfare data element 737931 Person—ADF veteran status, code N.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension(Australian Veteran Status) (Extension Type: Coding)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      22. Patient.extension:closingTheGapRegistration
      Slice NameclosingTheGapRegistration
      Definition

      Indication of eligibility for the Closing the Gap co-payment.

      ShortClosing the Gap co-payment eligibility indicator
      Comments

      This concept is equivalent to Australian Institute of Health and Welfare data element 603671 Patient—Closing the Gap co-payment eligibility indicator.

      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Closing the Gap Registration) (Extension Type: boolean)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      24. Patient.extension:mothersMaidenName
      Slice NamemothersMaidenName
      Definition

      Mother's maiden (unmarried) name, commonly collected to help verify patient identity.

      ShortMother's Maiden name
      Control0..1
      TypeExtension(Patient Mother's Maiden Name) (Extension Type: string)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      26. Patient.extension:interpreterRequired
      Slice NameinterpreterRequired
      Definition

      This Patient requires an interpreter to communicate healthcare information to the practitioner.

      ShortWhether the patient needs an interpreter
      Comments

      The Patient does not speak the default language of the organization, and hence requires an interpreter. If the patient has other languages in the Communications list, then that would be the type of interpreter required.

      Control0..1
      TypeExtension(Patient Interpreter Required) (Extension Type: boolean)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      28. Patient.extension:dateOfArrival
      Slice NamedateOfArrival
      Definition

      The date a person first arrived in Australia, from another country, with the intention of living in Australia for one year or more. This date is captured once for a person and is not subsequently updated with subsequent arrivals.

      ShortYear of Arrival
      Comments

      See Australian Bureau of Statics (ABS) 1200.0.55.007 - Year of Arrival Standard, 2014, Version 1.5 for further information. This concept is equivalent to Australian Institute of Health and Welfare data element 269447 Person—year of first arrival in Australia.

      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Date of Arrival in Australia) (Extension Type: date)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      30. Patient.extension:genderIdentity
      Slice NamegenderIdentity
      Definition

      An individual's personal sense of being a man, woman, boy, girl, nonbinary, or something else.

      ShortGender identity shall be a member of the Gender Identity Response value set if any codes within that value set can apply
      Comments

      Individual Gender identity Gender Identity Response (Extensible). See Australian Bureau of Statics (ABS) Standard for Sex, Gender, Variations of Sex Characteristics and Sexual Orientation Variables, 2020 for further materials.

      Control0..*
      This element is affected by the following invariants: inv-pat-1
      TypeExtension(Individual Gender Identity) (Complex Extension)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      32. Patient.extension:individualPronouns
      Slice NameindividualPronouns
      Definition

      The pronouns to use when referring to an individual in verbal or written communication.

      ShortPronouns shall be a member of the Australian Pronouns value set if any codes within that value set can apply
      Comments

      Individual Pronouns Australian Pronouns (Extensible).

      Control0..*
      This element is affected by the following invariants: inv-pat-2
      TypeExtension(Individual Pronouns) (Complex Extension)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      34. Patient.extension:recordedSexOrGender
      Slice NamerecordedSexOrGender
      Definition

      A sex or gender property for the individual from a document or other record

      ShortRecorded sex or gender type shall be a member of the AU Recorded Sex or Gender Type value set if any codes within that value set can apply. Recorded sex or gender source document type shall be a member of the AU Recorded Sex or Gender (RSG) Source Document Type value set if any codes within that value set can apply. Recorded sex or gender jurisdiction shall be a member of the Jurisdiction - ValueSet AU Extended value set if any codes within that value set can apply
      Comments

      Person Recorded Sex Or Gender type AU Recorded Sex or Gender Type (extensible). Person Recorded Sex Or Gender source document AU Recorded Sex or Gender (RSG) Source Document Type (extensible). Person Recorded Sex Or Gender jurisdiction Jurisdiction ValueSet - AU Extended (extensible).

      Control0..*
      This element is affected by the following invariants: inv-pat-3, inv-pat-4, inv-pat-5
      TypeExtension(Person Recorded Sex Or Gender) (Complex Extension)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      36. Patient.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      38. Patient.identifier
      Definition

      An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

      ShortIdentifies this patient across multiple systems
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control1..*
      This element is affected by the following invariants: ele-1, inv-dh-pat-01
      TypeIdentifier(Identifier, AU IHI, AU Medicare Card Number, AU DVA Number, AU Health Care Card Number, AU Pensioner Concession Card Number, AU Commonwealth Seniors Health Card Number, AU Medical Record Number, AU Insurance Member Number)
      Is Modifierfalse
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Requirements

      Patients are almost always assigned specific numerical identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      40. Patient.active
      Definition

      Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

      It is often used to filter patient lists to exclude inactive patients

      Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

      ShortWhether this patient's record is in active use
      Comments

      If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

      Control0..1
      Typeboolean
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to be able to mark a patient record as not to be used because it was created in error.

      Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
      Fixed Valuetrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      42. Patient.name
      Definition

      A name associated with the individual.

      ShortA name associated with the patient
      Comments

      A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

      Control1..*
      TypeHumanName
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      44. Patient.telecom
      Definition

      A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

      ShortA contact detail for the individual
      Comments

      A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

      Control0..*
      TypeContactPoint
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      People have (primary) ways to contact them in some way such as phone, email.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      46. Patient.gender
      Definition

      Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

      Shortmale | female | other | unknown
      Comments

      The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

      Control0..1
      BindingThe codes SHALL be taken from AdministrativeGender
      (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

      The gender of a person used for administrative purposes.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Needed for identification of the individual, in combination with (at least) name and birth date.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      48. Patient.birthDate
      Definition

      The date of birth for the individual.

      ShortDate of birth extended for time and accuracy indicator
      Comments

      At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

      Control0..1
      This element is affected by the following invariants: inv-pat-0
      Typedate
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Age of the individual drives many clinical processes. May include accuracy indicator and specific birth time.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      LOINC Code21112-8
      50. Patient.birthDate.id
      Definition

      unique id for the element within a resource (for internal references)

      Shortxml:id (or equivalent in JSON)
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      52. Patient.birthDate.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Patient.birthDate.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 54. Patient.birthDate.extension:accuracyIndicator
        Slice NameaccuracyIndicator
        Definition

        General date accuracy indicator coding.

        ShortDate accuracy indicator
        Comments

        In some circumstances, systems may capture date or dateTime data that has unknown or estimated parts. This coding indicates the accuracy of the day, month and year parts. This concept is equivalent to Australian Institute of Health and Welfare data element 294418 Date—accuracy indicator.

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(Date Accuracy Indicator) (Extension Type: Coding)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        56. Patient.birthDate.extension:birthTime
        Slice NamebirthTime
        Definition

        The time of day that the Patient was born. This includes the date to ensure that the timezone information can be communicated effectively.

        ShortTime of day of birth
        Control0..1
        This element is affected by the following invariants: inv-pat-0
        TypeExtension(Patient Birth Time) (Extension Type: dateTime)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        58. Patient.birthDate.value
        Definition

        The actual value

        ShortPrimitive value for date
        Control0..1
        Typedate
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        60. Patient.deceased[x]
        Definition

        Indicates if the individual is deceased or not. Deceased date accuracy indicator is optional.

        ShortIndicates if the individual is deceased or not
        Comments

        If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

        Control0..1
        TypeChoice of: boolean, dateTime
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Requirements

        The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Patient.deceased[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
        • type @ $this
        • 62. Patient.deceased[x]:deceasedBoolean
          Slice NamedeceasedBoolean
          Definition

          Boolean indicator if the individual is deceased or not.

          ShortDeceased indicator
          Comments

          If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

          Control0..1
          Typeboolean
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          64. Patient.deceased[x]:deceasedDateTime
          Slice NamedeceasedDateTime
          Definition

          Individual deceased date-time with optional accuracy indicator.

          ShortDeceased date time
          Comments

          If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

          Control0..1
          TypedateTime
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          66. Patient.deceased[x]:deceasedDateTime.id
          Definition

          unique id for the element within a resource (for internal references)

          Shortxml:id (or equivalent in JSON)
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          68. Patient.deceased[x]:deceasedDateTime.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Patient.deceased[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 70. Patient.deceased[x]:deceasedDateTime.extension:accuracyIndicator
            Slice NameaccuracyIndicator
            Definition

            General date accuracy indicator coding.

            ShortDate accuracy indicator
            Comments

            In some circumstances, systems may capture date or dateTime data that has unknown or estimated parts. This coding indicates the accuracy of the day, month and year parts. This concept is equivalent to Australian Institute of Health and Welfare data element 294418 Date—accuracy indicator.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Date Accuracy Indicator) (Extension Type: Coding)
            Is Modifierfalse
            Must Supporttrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            72. Patient.deceased[x]:deceasedDateTime.value
            Definition

            The actual value

            ShortPrimitive value for dateTime
            Control0..1
            TypedateTime
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            74. Patient.address
            Definition

            An Australian address expressed using postal conventions (as opposed to GPS or other location definition formats).

            ShortAn address for the individual
            Comments

            The address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeAddress(Australian Address, Address)
            Is Modifierfalse
            Must Supporttrue
            Must Support TypesNo must-support rules about the choice of types/profiles
            Requirements

            May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            inv-add-0: The address shall at least have text or a line (text.exists() or line.exists())
            inv-add-1: If asserting no fixed address, the type shall be 'physical' (extension('http://hl7.org.au/fhir/StructureDefinition/no-fixed-address').exists() implies type='physical')
            inv-add-2: If asserting no fixed address, the address text shall begin with 'NO FIXED ADDRESS' (extension('http://hl7.org.au/fhir/StructureDefinition/no-fixed-address').exists() implies text.startsWith('NO FIXED ADDRESS'))
            76. Patient.maritalStatus
            Definition

            This field contains a patient's most recent marital (civil) status.

            ShortMarital (civil) status of a patient
            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from Marital Status Codes
            (extensible to http://hl7.org/fhir/ValueSet/marital-status)

            The domestic partnership status of a person.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Most, if not all systems capture it.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            78. Patient.multipleBirth[x]
            Definition

            Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

            ShortWhether patient is part of a multiple birth
            Comments

            Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

            Control0..1
            TypeChoice of: boolean, integer
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Must Support TypesNo must-support rules about the choice of types/profiles
            Summaryfalse
            Requirements

            For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            80. Patient.photo
            Definition

            Image of the patient.

            ShortImage of the patient
            Comments

            Guidelines:

            • Use id photos, not clinical photos.
            • Limit dimensions to thumbnail.
            • Keep byte count low to ease resource updates.
            Control0..*
            TypeAttachment
            Is Modifierfalse
            Summaryfalse
            Requirements

            Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            82. Patient.contact
            Definition

            A contact party (e.g. guardian, partner, friend) for the patient.

            ShortA contact party (e.g. guardian, partner, friend) for the patient
            Comments

            Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Need to track people you can contact about the patient.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
            inv-dh-pat-05: If present, a contact's organisation shall at least have a reference, an identifier or a display (organization.exists() implies (organization.reference.exists() or organization.identifier.exists() or organization.display.exists()))
            84. Patient.contact.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            86. Patient.contact.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            88. Patient.contact.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            90. Patient.contact.relationship
            Definition

            The nature of the relationship between the patient and the contact person.

            ShortThe kind of relationship
            Control0..*
            BindingUnless not suitable, these codes SHALL be taken from Contact Relationship Type .
            (extensible to https://healthterminologies.gov.au/fhir/ValueSet/contact-relationship-type-3)
            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Used to determine which contact person is the most relevant to approach, depending on circumstances.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            92. Patient.contact.name
            Definition

            A name associated with the contact person.

            ShortA name associated with the contact person
            Control0..1
            TypeHumanName
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            94. Patient.contact.telecom
            Definition

            A contact detail for the person, e.g. a telephone number or an email address.

            ShortA contact detail for the person
            Comments

            Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

            Control0..*
            TypeContactPoint
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            People have (primary) ways to contact them in some way such as phone, email.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            96. Patient.contact.address
            Definition

            An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.

            ShortAddress for the contact person
            Comments

            The address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeAddress(Address, Australian Address)
            Is Modifierfalse
            Must Supporttrue
            Must Support TypesNo must-support rules about the choice of types/profiles
            Requirements

            Need to keep track where the contact person can be contacted per postal mail or visited.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            98. Patient.contact.gender
            Definition

            Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

            Shortmale | female | other | unknown
            Control0..1
            BindingThe codes SHALL be taken from AdministrativeGender
            (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

            The gender of a person used for administrative purposes.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summaryfalse
            Requirements

            Needed to address the person correctly.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            100. Patient.contact.organization
            Definition

            Organization on behalf of which the contact is acting or for which the contact is working.

            ShortOrganization that is associated with the contact
            Control0..1
            This element is affected by the following invariants: pat-1
            TypeReference(ADHA Core Organization)
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            For guardians or business related contacts, the organization is relevant.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            102. Patient.contact.period
            Definition

            The period during which this contact person or organization is valid to be contacted relating to this patient.

            ShortThe period during which this contact person or organization is valid to be contacted relating to this patient
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            104. Patient.communication
            Definition

            A language which may be used to communicate with the patient about his or her health.

            ShortA language which may be used to communicate with the patient about his or her health
            Comments

            If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            106. Patient.communication.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            108. Patient.communication.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            110. Patient.communication.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            112. Patient.communication.language
            Definition

            The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

            ShortThe language which can be used to communicate with the patient about his or her health
            Comments

            The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from Common Languages in Australia .
            (extensible to https://healthterminologies.gov.au/fhir/ValueSet/common-languages-australia-2)
            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            114. Patient.communication.preferred
            Definition

            Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

            ShortLanguage preference indicator
            Comments

            This language is specifically identified for communicating healthcare information.

            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summaryfalse
            Requirements

            People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            116. Patient.generalPractitioner
            Definition

            Patient's nominated care provider.

            ShortPatient's nominated primary care provider
            Comments

            This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

            Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

            Control0..*
            This element is affected by the following invariants: inv-dh-pat-03
            TypeReference(ADHA Core Organization, ADHA Core PractitionerRole)
            Is Modifierfalse
            Must Supporttrue
            Must Support TypesNo must-support rules about the choice of types/profiles
            Summaryfalse
            Alternate NamescareProvider
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            118. Patient.managingOrganization
            Definition

            Organization that is the custodian of the patient record.

            ShortOrganization that is the custodian of the patient record
            Comments

            There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

            Control0..1
            TypeReference(Organization)
            Is Modifierfalse
            Summarytrue
            Requirements

            Need to know who recognizes this patient record, manages and updates it.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            120. Patient.link
            Definition

            Link to a Patient or RelatedPerson resource that concerns the same actual person.

            ShortLink to a Patient or RelatedPerson resource that concerns the same actual person
            Comments

            There is no assumption that linked patient records have mutual links.

            Control0..*
            TypeBackboneElement
            Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
            Summarytrue
            Requirements

            There are multiple use cases:

            • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
            • Distribution of patient information across multiple servers.
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            122. Patient.link.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            124. Patient.link.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            126. Patient.link.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            128. Patient.link.other
            Definition

            The other patient resource that the link refers to.

            ShortThe other patient or related person resource that the link refers to
            Comments

            Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

            Control1..1
            TypeReference(Patient, RelatedPerson)
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            130. Patient.link.type
            Definition

            The type of link between this patient resource and another patient resource.

            Shortreplaced-by | replaces | refer | seealso
            Control1..1
            BindingThe codes SHALL be taken from LinkType
            (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

            The type of link between this patient resource and another patient resource.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))