minimal Common Oncology Data Elements (mCODE) Implementation Guide
4.0.0-ballot - ballot United States of America flag

minimal Common Oncology Data Elements (mCODE) Implementation Guide, published by HL7 International / Clinical Interoperability Council. This guide is not an authorized publication; it is the continuous build for version 4.0.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/fhir-mCODE-ig/ and changes regularly. See the Directory of published versions

Resource Profile: GenomicRegionStudied - Detailed Descriptions

Active as of 2024-03-26 Maturity Level: 1

Definitions for the mcode-genomic-region-studied resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Observation
2. Observation.status
Must Supporttrue
4. Observation.category
Must Supporttrue
6. Observation.category:labCategory
Slice NamelabCategory
Pattern Value{
  "coding" : [{
    "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
    "code" : "laboratory"
  }]
}
8. Observation.category:labCategory.coding
Control0..1
10. Observation.code
Must Supporttrue
12. Observation.subject
Control1..?
TypeReference(Cancer Patient Profile)
Must Supporttrue
14. Observation.effective[x]
[x] NoteSee Choice of Data Types for further information about how to use [x]
Must Supporttrue
SlicingThis element introduces a set of slices on Observation.effective[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
  • 16. Observation.effective[x]:effectiveDateTime
    Slice NameeffectiveDateTime
    Control0..1
    TypedateTime
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    18. Observation.value[x]
    Definition

    Not used in this profile.

    [x] NoteSee Choice of Data Types for further information about how to use [x]
    20. Observation.dataAbsentReason
    Must Supporttrue
    22. Observation.component
    Must Supporttrue
    24. Observation.component:gene-studied
    Slice Namegene-studied
    Must Supporttrue
    26. Observation.component:gene-studied.code
    Must Supporttrue
    28. Observation.component:gene-studied.value[x]
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Must Supporttrue
    30. Observation.component:gene-mutations
    Slice Namegene-mutations
    Must Supporttrue
    32. Observation.component:gene-mutations.code
    Must Supporttrue
    34. Observation.component:gene-mutations.value[x]
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Must Supporttrue
    36. Observation.component:region-description
    Slice Nameregion-description
    Must Supporttrue
    38. Observation.component:region-description.code
    Must Supporttrue
    40. Observation.component:region-description.value[x]
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Must Supporttrue
    42. Observation.component:ranges-examined
    Slice Nameranges-examined
    Must Supporttrue
    44. Observation.component:ranges-examined.code
    Must Supporttrue
    46. Observation.component:ranges-examined.value[x]
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Must Supporttrue
    48. Observation.component:coordinate-system
    Slice Namecoordinate-system
    Must Supporttrue
    50. Observation.component:coordinate-system.code
    Must Supporttrue
    52. Observation.component:coordinate-system.value[x]
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Must Supporttrue
    54. Observation.component:genomic-ref-seq
    Slice Namegenomic-ref-seq
    Must Supporttrue
    56. Observation.component:genomic-ref-seq.code
    Must Supporttrue
    58. Observation.component:genomic-ref-seq.value[x]
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Must Supporttrue

    Guidance on how to interpret the contents of this table can be found here

    0. Observation
    Definition

    Measurements and simple assertions made about a patient, device or other subject.

    ShortRegion StudiedMeasurements and simple assertions
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
    obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
    obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
    obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
    2. Observation.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Observation.extension:secondary-finding
    Slice Namesecondary-finding
    Definition

    Secondary findings are genetic test results that provide information about variants in a gene unrelated to the primary purpose for the testing, most often discovered when Whole Exome Sequencing (WES) or Whole Genome Sequencing (WGS) is performed. This extension should be used to denote when a genetic finding is being shared as a secondary finding, and ideally refer to a corresponding guideline or policy statement.

    For more detail, please see: https://ghr.nlm.nih.gov/primer/testing/secondaryfindings.

    ShortSecondary findings are genetic test results that provide information about variants in a gene unrelated to the primary purpose for the testing, most often discovered when [Whole Exome Sequencing (WES)](https://en.wikipedia.org/wiki/Exome_sequencing) or [Whole Genome Sequencing (WGS)](https://en.wikipedia.org/wiki/Whole_genome_sequencing) is performed. This extension should be used to denote when a genetic finding is being shared as a secondary finding, and ideally refer to a corresponding guideline or policy statement. For more detail, please see: https://ghr.nlm.nih.gov/primer/testing/secondaryfindings
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Observation Secondary Finding) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. Observation.extension:body-structure
    Slice Namebody-structure
    Definition

    Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

    ShortTarget anatomic location or structure
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Observation.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Observation.status
    Definition

    The status of the result value.

    Shortregistered | preliminary | final | amended +
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from ObservationStatushttp://hl7.org/fhir/ValueSet/observation-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/observation-status|4.0.1)

    Codes providing the status of an observation.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to track the status of individual results. Some results are finalized before the whole report is finalized.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Observation.category
    Definition

    A code that classifies the general type of observation being made.

    ShortClassification of type of observation
    Comments

    In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

    Control10..*
    BindingThe codes SHOULD be taken from ObservationCategoryCodeshttp://hl7.org/fhir/ValueSet/observation-category
    (preferred to http://hl7.org/fhir/ValueSet/observation-category)

    Codes for high level observation categories.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Used for filtering what observations are retrieved and displayed.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Observation.category. The slices are unordered and Open, and can be differentiated using the following discriminators:
    • value @ coding
    • 14. Observation.category:labCategory
      Slice NamelabCategory
      Definition

      A code that classifies the general type of observation being made.

      ShortClassification of type of observation
      Comments

      In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

      Control10..1*
      BindingThe codes SHOULD be taken from ObservationCategoryCodeshttp://hl7.org/fhir/ValueSet/observation-category
      (preferred to http://hl7.org/fhir/ValueSet/observation-category)

      Codes for high level observation categories.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Used for filtering what observations are retrieved and displayed.

      Pattern Value{
        "coding" : [{
          "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
          "code" : "laboratory"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Observation.category:labCategory.coding
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control10..1*
      TypeCoding
      Is Modifierfalse
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Pattern Value{
        "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
        "code" : "laboratory"
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Observation.code
      Definition

      Describes what was observed. Sometimes this is called the observation "name".

      Short53041-0Type of observation (code / type)
      Comments

      All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

      Control1..1
      BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
      (example to http://hl7.org/fhir/ValueSet/observation-codes)

      Codes identifying names of simple observations.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Knowing what kind of observation is being made is essential to understanding the observation.

      Alternate NamesName
      Pattern Value{
        "coding" : [{
          "system" : "http://loinc.org",
          "code" : "53041-0"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Observation.subject
      Definition

      The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

      ShortWho and/or what the observation is about
      Comments

      One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

      Control10..1
      TypeReference(Cancer Patient Profile, Patient, Group, Device, Location)
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Observations have no value if you don't know who or what they're about.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Observation.effective[x]
      Definition

      The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

      ShortClinically relevant time/time-period for observation
      Comments

      At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

      Control0..1
      TypeChoice of: dateTime, Period, Timing, instant
      [x] NoteSee Choice of Data Types for further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summarytrue
      Requirements

      Knowing when an observation was deemed true is important to its relevance as well as determining trends.

      Alternate NamesOccurrence
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Observation.effective[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
      • type @ $this
      • 24. Observation.effective[x]:effectiveDateTime
        Slice NameeffectiveDateTime
        Definition

        The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

        ShortClinically relevant time/time-period for observation
        Comments

        At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

        Control0..1
        TypedateTime, Period, Timing, instant
        [x] NoteSee Choice of Data Types for further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Knowing when an observation was deemed true is important to its relevance as well as determining trends.

        Alternate NamesOccurrence
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. Observation.value[x]
        Definition

        Not used in this profile.


        The information determined as a result of making the observation, if the information has a simple value.

        ShortActual result
        Comments

        An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

        Control0..01
        This element is affected by the following invariants: obs-7
        TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Observation.dataAbsentReason
        Definition

        Provides a reason why the expected value in the element Observation.value[x] is missing.

        ShortWhy the result is missing
        Comments

        Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory".

        The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

        Control0..1
        This element is affected by the following invariants: obs-6
        BindingUnless not suitable, these codes SHALL be taken from DataAbsentReasonhttp://hl7.org/fhir/ValueSet/data-absent-reason
        (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

        Codes specifying why the result (Observation.value[x]) is missing.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        For many results it is necessary to handle exceptional values in measurements.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Observation.component
        Definition

        Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

        ShortComponent results
        Comments

        For a discussion on the ways Observations can be assembled in groups together see Notes below.

        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Observation.component. The slices are unordered and Open, and can be differentiated using the following discriminators:
        • pattern @ code
        • 32. Observation.component.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          34. Observation.component.code
          Definition

          Describes what was observed. Sometimes this is called the observation "code".

          ShortType of component observation (code / type)
          Comments

          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

          Control1..1
          BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Codes identifying names of simple observations.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Knowing what kind of observation is being made is essential to understanding the observation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. Observation.component:conclusion-string
          Slice Nameconclusion-string
          Definition

          Concise and clinically contextualized summary conclusion (interpretation/impression) of the observation


          Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

          ShortClinical ConclusionComponent results
          Comments

          An example would be the interpretative information, typically canned, about a variant identified in the patient.


          For a discussion on the ways Observations can be assembled in groups together see Notes below.

          Control0..1*
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Requirements

          Need to be able to provide a conclusion that is not lost among the basic result data.


          Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. Observation.component:conclusion-string.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          40. Observation.component:conclusion-string.code
          Definition

          Describes what was observed. Sometimes this is called the observation "code".

          Shortconclusion-stringType of component observation (code / type)
          Comments

          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

          Control1..1
          BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Codes identifying names of simple observations.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Knowing what kind of observation is being made is essential to understanding the observation.

          Pattern Value{
            "coding" : [{
              "system" : "http://hl7.org/fhir/uv/genomics-reporting/CodeSystem/tbd-codes-cs",
              "code" : "conclusion-string"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. Observation.component:gene-studied
          Slice Namegene-studied
          Definition

          The gene(s) on which the variant is located.


          Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

          ShortGene StudiedComponent results
          Comments

          For a discussion on the ways Observations can be assembled in groups together see Notes below.

          Control0..1*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. Observation.component:gene-studied.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          46. Observation.component:gene-studied.code
          Definition

          Describes what was observed. Sometimes this is called the observation "code".

          Short48018-6Type of component observation (code / type)
          Comments

          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

          Control1..1
          BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Codes identifying names of simple observations.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Knowing what kind of observation is being made is essential to understanding the observation.

          Pattern Value{
            "coding" : [{
              "system" : "http://loinc.org",
              "code" : "48018-6"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. Observation.component:gene-studied.value[x]
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortThe HGNC gene symbol is to be used as display text and the HGNC gene ID used as the code. If no HGNC code issued for this gene yet, NCBI gene IDs SHALL be used.Actual component result
          Comments

          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control10..1
          BindingUnless not suitable, these codes SHALL be taken from For codes, see HUGO Gene Nomenclature Committee Gene Names (HGNC)
          (extensible to http://hl7.org/fhir/uv/genomics-reporting/ValueSet/hgnc-vs)
          TypeCodeableConcept, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, Range
          [x] NoteSee Choice of Data Types for further information about how to use [x]
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. Observation.component:gene-mutations
          Slice Namegene-mutations
          Definition

          Gene mutations that were tested for.


          Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

          ShortGene Mutations IDComponent results
          Comments

          For a discussion on the ways Observations can be assembled in groups together see Notes below.

          Control0..1*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          52. Observation.component:gene-mutations.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          54. Observation.component:gene-mutations.code
          Definition

          Describes what was observed. Sometimes this is called the observation "code".

          Short36908-2Type of component observation (code / type)
          Comments

          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

          Control1..1
          BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Codes identifying names of simple observations.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Knowing what kind of observation is being made is essential to understanding the observation.

          Pattern Value{
            "coding" : [{
              "system" : "http://loinc.org",
              "code" : "36908-2"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. Observation.component:gene-mutations.value[x]
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortActual component result
          Comments

          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control10..1
          BindingThe codes SHALL be taken from For codes, see Human Genome Variation Society (HGVS) Nomenclature
          (required to http://hl7.org/fhir/uv/genomics-reporting/ValueSet/hgvs-vs)
          TypeCodeableConcept, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, Range
          [x] NoteSee Choice of Data Types for further information about how to use [x]
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. Observation.component:region-description
          Slice Nameregion-description
          Definition

          Description of region examined.


          Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

          ShortRegion DescriptionComponent results
          Comments

          For a discussion on the ways Observations can be assembled in groups together see Notes below.

          Control0..1*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. Observation.component:region-description.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          62. Observation.component:region-description.code
          Definition

          Describes what was observed. Sometimes this is called the observation "code".

          Short81293-3Type of component observation (code / type)
          Comments

          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

          Control1..1
          BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Codes identifying names of simple observations.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Knowing what kind of observation is being made is essential to understanding the observation.

          Pattern Value{
            "coding" : [{
              "system" : "http://loinc.org",
              "code" : "81293-3"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          64. Observation.component:region-description.value[x]
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortActual component result
          Comments

          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          Typestring, dateTime, boolean, SampledData, Quantity, Period, Ratio, integer, time, Range, CodeableConcept
          [x] NoteSee Choice of Data Types for further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          66. Observation.component:region-coverage
          Slice Nameregion-coverage
          Definition

          When sequencing, what % of the region was covered.


          Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

          ShortRegion CoverageComponent results
          Comments

          For a discussion on the ways Observations can be assembled in groups together see Notes below.

          Control0..1*
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Requirements

          Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          68. Observation.component:region-coverage.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          70. Observation.component:region-coverage.code
          Definition

          Describes what was observed. Sometimes this is called the observation "code".

          Shortregion-coverageType of component observation (code / type)
          Comments

          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

          Control1..1
          BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Codes identifying names of simple observations.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Knowing what kind of observation is being made is essential to understanding the observation.

          Pattern Value{
            "coding" : [{
              "system" : "http://hl7.org/fhir/uv/genomics-reporting/CodeSystem/tbd-codes-cs",
              "code" : "region-coverage"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. Observation.component:ranges-examined
          Slice Nameranges-examined
          Definition

          This term is used to report the region(s) of interest for sequencing studies as one or more numeric ranges that identify the parts of the reference sequence that are sequenced. These can be recorded as one or more HL7 numeric ranges using repeat delimiters to seperate multiple such ranges.


          Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

          ShortRange(s) of DNA sequence examinedComponent results
          Comments

          For a discussion on the ways Observations can be assembled in groups together see Notes below.

          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          74. Observation.component:ranges-examined.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          76. Observation.component:ranges-examined.code
          Definition

          Describes what was observed. Sometimes this is called the observation "code".

          Short51959-5Type of component observation (code / type)
          Comments

          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

          Control1..1
          BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Codes identifying names of simple observations.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Knowing what kind of observation is being made is essential to understanding the observation.

          Pattern Value{
            "coding" : [{
              "system" : "http://loinc.org",
              "code" : "51959-5"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          78. Observation.component:ranges-examined.value[x]
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortActual component result
          Comments

          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          TypeRange, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, CodeableConcept
          [x] NoteSee Choice of Data Types for further information about how to use [x]
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          80. Observation.component:coordinate-system
          Slice Namecoordinate-system
          Definition

          These are different ways of identifying nucleotides or amino acids within a sequence. In the 1-based system, the first unit of the polymer (e.g. the first nucleotide) is counted as number 1. In the 0-based system, the number 0 designates the location before the first nucleotide. Different databases and file types may use different systems.


          Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

          ShortCoordinate SystemComponent results
          Comments

          For a discussion on the ways Observations can be assembled in groups together see Notes below.

          Control0..1*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          82. Observation.component:coordinate-system.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          84. Observation.component:coordinate-system.code
          Definition

          Describes what was observed. Sometimes this is called the observation "code".

          Short92822-6Type of component observation (code / type)
          Comments

          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

          Control1..1
          BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Codes identifying names of simple observations.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Knowing what kind of observation is being made is essential to understanding the observation.

          Pattern Value{
            "coding" : [{
              "system" : "http://loinc.org",
              "code" : "92822-6"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          86. Observation.component:coordinate-system.value[x]
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          Short0-based interval counting | 0-based character counting | 1-based character countingActual component result
          Comments

          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control10..1
          BindingUnless not suitable, these codes SHALL be taken from For codes, see LOINC Answer List LL5323-2
          (extensible to http://loinc.org/vs/LL5323-2)
          TypeCodeableConcept, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, Range
          [x] NoteSee Choice of Data Types for further information about how to use [x]
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          88. Observation.component:genomic-ref-seq
          Slice Namegenomic-ref-seq
          Definition

          ID of the genomic reference sequence, which includes transcribed and non transcribed stretches.


          Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

          ShortGenomic Reference SequenceComponent results
          Comments

          For a discussion on the ways Observations can be assembled in groups together see Notes below.

          Control0..1*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          90. Observation.component:genomic-ref-seq.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          92. Observation.component:genomic-ref-seq.code
          Definition

          Describes what was observed. Sometimes this is called the observation "code".

          Short48013-7Type of component observation (code / type)
          Comments

          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

          Control1..1
          BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Codes identifying names of simple observations.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Knowing what kind of observation is being made is essential to understanding the observation.

          Pattern Value{
            "coding" : [{
              "system" : "http://loinc.org",
              "code" : "48013-7"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          94. Observation.component:genomic-ref-seq.value[x]
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortVersioned genomic reference sequence identifier.Actual component result
          Comments

          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control10..1
          Binding

          Multiple bindings acceptable (NCBI or LRG)

          TypeCodeableConcept, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, Range
          [x] NoteSee Choice of Data Types for further information about how to use [x]
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          96. Observation.component:uncallable-regions
          Slice Nameuncallable-regions
          Definition

          Contiguous region(s) where a call was not made.


          Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

          ShortUncallable Sub-regionsComponent results
          Comments

          For a discussion on the ways Observations can be assembled in groups together see Notes below.

          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Requirements

          Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          98. Observation.component:uncallable-regions.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          100. Observation.component:uncallable-regions.code
          Definition

          Describes what was observed. Sometimes this is called the observation "code".

          Shortuncallable-regionsType of component observation (code / type)
          Comments

          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

          Control1..1
          BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Codes identifying names of simple observations.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Knowing what kind of observation is being made is essential to understanding the observation.

          Pattern Value{
            "coding" : [{
              "system" : "http://hl7.org/fhir/uv/genomics-reporting/CodeSystem/tbd-codes-cs",
              "code" : "uncallable-regions"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

          Guidance on how to interpret the contents of this table can be found here

          0. Observation
          Definition

          Measurements and simple assertions made about a patient, device or other subject.

          ShortRegion Studied
          Comments

          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..*
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
          obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
          2. Observation.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Is Modifierfalse
          Summarytrue
          4. Observation.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. Observation.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. Observation.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHOULD be taken from CommonLanguages
          (preferred to http://hl7.org/fhir/ValueSet/languages)

          A human language.

          Additional BindingsPurpose
          AllLanguagesMax Binding
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. Observation.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          TypeNarrative
          Is Modifierfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. Observation.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

          Control0..*
          TypeResource
          Is Modifierfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. Observation.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Observation.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. Observation.extension:secondary-finding
            Slice Namesecondary-finding
            Definition

            Secondary findings are genetic test results that provide information about variants in a gene unrelated to the primary purpose for the testing, most often discovered when Whole Exome Sequencing (WES) or Whole Genome Sequencing (WGS) is performed. This extension should be used to denote when a genetic finding is being shared as a secondary finding, and ideally refer to a corresponding guideline or policy statement.

            For more detail, please see: https://ghr.nlm.nih.gov/primer/testing/secondaryfindings.

            ShortSecondary findings are genetic test results that provide information about variants in a gene unrelated to the primary purpose for the testing, most often discovered when [Whole Exome Sequencing (WES)](https://en.wikipedia.org/wiki/Exome_sequencing) or [Whole Genome Sequencing (WGS)](https://en.wikipedia.org/wiki/Whole_genome_sequencing) is performed. This extension should be used to denote when a genetic finding is being shared as a secondary finding, and ideally refer to a corresponding guideline or policy statement. For more detail, please see: https://ghr.nlm.nih.gov/primer/testing/secondaryfindings
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Observation Secondary Finding) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. Observation.extension:body-structure
            Slice Namebody-structure
            Definition

            Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

            ShortTarget anatomic location or structure
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. Observation.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Summaryfalse
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            22. Observation.identifier
            Definition

            A unique identifier assigned to this observation.

            ShortBusiness Identifier for observation
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows observations to be distinguished and referenced.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. Observation.basedOn
            Definition

            A plan, proposal or order that is fulfilled in whole or in part by this event. For example, a MedicationRequest may require a patient to have laboratory test performed before it is dispensed.

            ShortFulfills plan, proposal or order
            Control0..*
            TypeReference(CarePlan, DeviceRequest, ImmunizationRecommendation, MedicationRequest, NutritionOrder, ServiceRequest)
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

            Alternate NamesFulfills
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. Observation.partOf
            Definition

            A larger event of which this particular Observation is a component or step. For example, an observation as part of a procedure.

            ShortPart of referenced event
            Comments

            To link an Observation to an Encounter use encounter. See the Notes below for guidance on referencing another Observation.

            Control0..*
            TypeReference(MedicationAdministration, MedicationDispense, MedicationStatement, Procedure, Immunization, ImagingStudy)
            Is Modifierfalse
            Summarytrue
            Alternate NamesContainer
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            28. Observation.status
            Definition

            The status of the result value.

            Shortregistered | preliminary | final | amended +
            Comments

            This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

            Control1..1
            BindingThe codes SHALL be taken from ObservationStatus
            (required to http://hl7.org/fhir/ValueSet/observation-status|4.0.1)

            Codes providing the status of an observation.

            Typecode
            Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Need to track the status of individual results. Some results are finalized before the whole report is finalized.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. Observation.category
            Definition

            A code that classifies the general type of observation being made.

            ShortClassification of type of observation
            Comments

            In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

            Control1..*
            BindingThe codes SHOULD be taken from ObservationCategoryCodes
            (preferred to http://hl7.org/fhir/ValueSet/observation-category)

            Codes for high level observation categories.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Used for filtering what observations are retrieved and displayed.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Observation.category. The slices are unordered and Open, and can be differentiated using the following discriminators:
            • value @ coding
            • 32. Observation.category:labCategory
              Slice NamelabCategory
              Definition

              A code that classifies the general type of observation being made.

              ShortClassification of type of observation
              Comments

              In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

              Control1..1
              BindingThe codes SHOULD be taken from ObservationCategoryCodes
              (preferred to http://hl7.org/fhir/ValueSet/observation-category)

              Codes for high level observation categories.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              Used for filtering what observations are retrieved and displayed.

              Pattern Value{
                "coding" : [{
                  "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
                  "code" : "laboratory"
                }]
              }
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. Observation.category:labCategory.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              36. Observation.category:labCategory.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Observation.category.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 38. Observation.category:labCategory.coding
                Definition

                A reference to a code defined by a terminology system.

                ShortCode defined by a terminology system
                Comments

                Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                Control1..1
                TypeCoding
                Is Modifierfalse
                Summarytrue
                Requirements

                Allows for alternative encodings within a code system, and translations to other code systems.

                Pattern Value{
                  "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
                  "code" : "laboratory"
                }
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                40. Observation.category:labCategory.text
                Definition

                A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                ShortPlain text representation of the concept
                Comments

                Very often the text is the same as a displayName of one of the codings.

                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                42. Observation.code
                Definition

                Describes what was observed. Sometimes this is called the observation "name".

                Short53041-0
                Comments

                All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                Control1..1
                BindingFor example codes, see LOINCCodes
                (example to http://hl7.org/fhir/ValueSet/observation-codes)

                Codes identifying names of simple observations.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Knowing what kind of observation is being made is essential to understanding the observation.

                Alternate NamesName
                Pattern Value{
                  "coding" : [{
                    "system" : "http://loinc.org",
                    "code" : "53041-0"
                  }]
                }
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                44. Observation.subject
                Definition

                The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

                ShortWho and/or what the observation is about
                Comments

                One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

                Control1..1
                TypeReference(Cancer Patient Profile)
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Observations have no value if you don't know who or what they're about.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                46. Observation.focus
                Definition

                The actual focus of an observation when it is not the patient of record representing something or someone associated with the patient such as a spouse, parent, fetus, or donor. For example, fetus observations in a mother's record. The focus of an observation could also be an existing condition, an intervention, the subject's diet, another observation of the subject, or a body structure such as tumor or implanted device. An example use case would be using the Observation resource to capture whether the mother is trained to change her child's tracheostomy tube. In this example, the child is the patient of record and the mother is the focus.

                ShortWhat the observation is about, when it is not about the subject of record
                Comments

                Typically, an observation is made about the subject - a patient, or group of patients, location, or device - and the distinction between the subject and what is directly measured for an observation is specified in the observation code itself ( e.g., "Blood Glucose") and does not need to be represented separately using this element. Use specimen if a reference to a specimen is required. If a code is required instead of a resource use either bodysite for bodysites or the standard extension focusCode.

                Control0..*
                TypeReference(Resource)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                48. Observation.encounter
                Definition

                The healthcare event (e.g. a patient and healthcare provider interaction) during which this observation is made.

                ShortHealthcare event during which this observation is made
                Comments

                This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

                Control0..1
                TypeReference(Encounter)
                Is Modifierfalse
                Summarytrue
                Requirements

                For some observations it may be important to know the link between an observation and a particular encounter.

                Alternate NamesContext
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                50. Observation.effective[x]
                Definition

                The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

                ShortClinically relevant time/time-period for observation
                Comments

                At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

                Control0..1
                TypeChoice of: dateTime, Period, Timing, instant
                [x] NoteSee Choice of Data Types for further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Must Support TypesNo must-support rules about the choice of types/profiles
                Summarytrue
                Requirements

                Knowing when an observation was deemed true is important to its relevance as well as determining trends.

                Alternate NamesOccurrence
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Observation.effective[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
                • type @ $this
                • 52. Observation.effective[x]:effectiveDateTime
                  Slice NameeffectiveDateTime
                  Definition

                  The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

                  ShortClinically relevant time/time-period for observation
                  Comments

                  At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

                  Control0..1
                  TypedateTime
                  [x] NoteSee Choice of Data Types for further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Knowing when an observation was deemed true is important to its relevance as well as determining trends.

                  Alternate NamesOccurrence
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  54. Observation.issued
                  Definition

                  The date and time this version of the observation was made available to providers, typically after the results have been reviewed and verified.

                  ShortDate/Time this version was made available
                  Comments

                  For Observations that don’t require review and verification, it may be the same as the lastUpdated time of the resource itself. For Observations that do require review and verification for certain updates, it might not be the same as the lastUpdated time of the resource itself due to a non-clinically significant update that doesn’t require the new version to be reviewed and verified again.

                  Control0..1
                  Typeinstant
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  56. Observation.performer
                  Definition

                  Who was responsible for asserting the observed value as "true".

                  ShortWho is responsible for the observation
                  Control0..*
                  TypeReference(Practitioner, PractitionerRole, Organization, CareTeam, Patient, RelatedPerson)
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  58. Observation.value[x]
                  Definition

                  Not used in this profile.

                  ShortActual result
                  Comments

                  An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                  Control0..0
                  This element is affected by the following invariants: obs-7
                  TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  60. Observation.dataAbsentReason
                  Definition

                  Provides a reason why the expected value in the element Observation.value[x] is missing.

                  ShortWhy the result is missing
                  Comments

                  Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory".

                  The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

                  Control0..1
                  This element is affected by the following invariants: obs-6
                  BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                  (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                  Codes specifying why the result (Observation.value[x]) is missing.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supporttrue
                  Summaryfalse
                  Requirements

                  For many results it is necessary to handle exceptional values in measurements.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  62. Observation.interpretation
                  Definition

                  A categorical assessment of an observation value. For example, high, low, normal.

                  ShortHigh, low, normal, etc.
                  Comments

                  Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                  Control0..*
                  BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                  (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                  Codes identifying interpretations of observations.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                  Alternate NamesAbnormal Flag
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  64. Observation.note
                  Definition

                  A text note which also contains information about who made the statement and when.

                  ShortComments about the Observation that also contain a coded type
                  Comments

                  May include general statements about the observation, or statements about significant, unexpected or unreliable results values, or information about its source when relevant to its interpretation. The CodedAnnotation data type, while not allowing for or intending to make the content computable, does allow the author to indicate the type of note. This does not replace the use of interpretation, value, or component values. One important note is that Annotation is a FHIR data type, this is NOT about annotations in the genomic context.

                  Control0..*
                  This element is affected by the following invariants: ele-1
                  TypeAnnotation(Coded Annotation)
                  Is Modifierfalse
                  Requirements

                  Need to be able to provide free text additional information. Notes SHALL NOT contain information which can be captured in a structured way.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  66. Observation.bodySite
                  Definition

                  Indicates the site on the subject's body where the observation was made (i.e. the target site).

                  ShortObserved body part
                  Comments

                  Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component.

                  If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite.

                  Control0..1
                  BindingFor example codes, see SNOMEDCTBodyStructures
                  (example to http://hl7.org/fhir/ValueSet/body-site)

                  Codes describing anatomical locations. May include laterality.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  68. Observation.method
                  Definition

                  Indicates the mechanism used to perform the observation.

                  ShortHow it was done
                  Comments

                  Only used if not implicit in code for Observation.code.

                  Control0..1
                  BindingFor example codes, see ObservationMethods
                  (example to http://hl7.org/fhir/ValueSet/observation-methods)

                  Methods for simple observations.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  70. Observation.specimen
                  Definition

                  The specimen that was used when this observation was made.

                  ShortSpecimen used for this observation
                  Comments

                  Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

                  Control0..1
                  TypeReference(Specimen)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  72. Observation.device
                  Definition

                  The device used to generate the observation data.

                  Short(Measurement) Device
                  Comments

                  Note that this is not meant to represent a device involved in the transmission of the result, e.g., a gateway. Such devices may be documented using the Provenance resource where relevant.

                  Control0..1
                  TypeReference(Device, DeviceMetric)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  74. Observation.referenceRange
                  Definition

                  Guidance on how to interpret the value by comparison to a normal or recommended range. Multiple reference ranges are interpreted as an "OR". In other words, to represent two distinct target populations, two referenceRange elements would be used.

                  ShortProvides guide for interpretation
                  Comments

                  Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  obs-3: Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())
                  76. Observation.referenceRange.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  78. Observation.referenceRange.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  80. Observation.referenceRange.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  82. Observation.referenceRange.low
                  Definition

                  The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3).

                  ShortLow Range, if relevant
                  Control0..1
                  This element is affected by the following invariants: obs-3
                  TypeQuantity(SimpleQuantity)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  84. Observation.referenceRange.high
                  Definition

                  The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3).

                  ShortHigh Range, if relevant
                  Control0..1
                  This element is affected by the following invariants: obs-3
                  TypeQuantity(SimpleQuantity)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  86. Observation.referenceRange.type
                  Definition

                  Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.

                  ShortReference range qualifier
                  Comments

                  This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.

                  Control0..1
                  BindingThe codes SHOULD be taken from ObservationReferenceRangeMeaningCodes
                  (preferred to http://hl7.org/fhir/ValueSet/referencerange-meaning)

                  Code for the meaning of a reference range.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  88. Observation.referenceRange.appliesTo
                  Definition

                  Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an "AND" of the target populations. For example, to represent a target population of African American females, both a code of female and a code for African American would be used.

                  ShortReference range population
                  Comments

                  This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.

                  Control0..*
                  BindingFor example codes, see ObservationReferenceRangeAppliesToCodes
                  (example to http://hl7.org/fhir/ValueSet/referencerange-appliesto)

                  Codes identifying the population the reference range applies to.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Need to be able to identify the target population for proper interpretation.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  90. Observation.referenceRange.age
                  Definition

                  The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so.

                  ShortApplicable age range, if relevant
                  Control0..1
                  TypeRange
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Some analytes vary greatly over age.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  92. Observation.referenceRange.text
                  Definition

                  Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of "Negative" or a list or table of "normals".

                  ShortText based reference range in an observation
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  94. Observation.hasMember
                  Definition

                  This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.

                  ShortRelated resource that belongs to the Observation group
                  Comments

                  When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.

                  Control0..*
                  TypeReference(Observation, QuestionnaireResponse, MolecularSequence)
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  96. Observation.derivedFrom
                  Definition

                  The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.

                  ShortRelated measurements the observation is made from
                  Comments

                  All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see Notes below.

                  Control0..*
                  TypeReference(DocumentReference, ImagingStudy, Media, QuestionnaireResponse, Observation, MolecularSequence)
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  98. Observation.component
                  Definition

                  Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

                  ShortComponent results
                  Comments

                  For a discussion on the ways Observations can be assembled in groups together see Notes below.

                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Observation.component. The slices are unordered and Open, and can be differentiated using the following discriminators:
                  • pattern @ code
                  • 100. Observation.component.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    102. Observation.component.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    104. Observation.component.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    106. Observation.component.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "code".

                    ShortType of component observation (code / type)
                    Comments

                    All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingFor example codes, see LOINCCodes
                    (example to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    108. Observation.component.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortActual component result
                    Comments

                    Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control0..1
                    TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    110. Observation.component.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                    ShortWhy the component result is missing
                    Comments

                    "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    112. Observation.component.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortHigh, low, normal, etc.
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    114. Observation.component.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range.

                    ShortProvides guide for interpretation of component result
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    116. Observation.component:conclusion-string
                    Slice Nameconclusion-string
                    Definition

                    Concise and clinically contextualized summary conclusion (interpretation/impression) of the observation

                    ShortClinical Conclusion
                    Comments

                    An example would be the interpretative information, typically canned, about a variant identified in the patient.

                    Control0..1
                    TypeBackboneElement
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Need to be able to provide a conclusion that is not lost among the basic result data.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    118. Observation.component:conclusion-string.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    120. Observation.component:conclusion-string.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    122. Observation.component:conclusion-string.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    124. Observation.component:conclusion-string.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "code".

                    Shortconclusion-string
                    Comments

                    All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingFor example codes, see LOINCCodes
                    (example to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://hl7.org/fhir/uv/genomics-reporting/CodeSystem/tbd-codes-cs",
                        "code" : "conclusion-string"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    126. Observation.component:conclusion-string.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortSummary conclusion (interpretation/impression)
                    Comments

                    Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control0..1
                    Typestring
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    128. Observation.component:conclusion-string.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                    ShortWhy the component result is missing
                    Comments

                    "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    130. Observation.component:conclusion-string.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortHigh, low, normal, etc.
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    132. Observation.component:conclusion-string.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range.

                    ShortProvides guide for interpretation of component result
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    134. Observation.component:gene-studied
                    Slice Namegene-studied
                    Definition

                    The gene(s) on which the variant is located.

                    ShortGene Studied
                    Comments

                    For a discussion on the ways Observations can be assembled in groups together see Notes below.

                    Control0..1
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    136. Observation.component:gene-studied.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    138. Observation.component:gene-studied.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    140. Observation.component:gene-studied.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    142. Observation.component:gene-studied.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "code".

                    Short48018-6
                    Comments

                    All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingFor example codes, see LOINCCodes
                    (example to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://loinc.org",
                        "code" : "48018-6"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    144. Observation.component:gene-studied.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortThe HGNC gene symbol is to be used as display text and the HGNC gene ID used as the code. If no HGNC code issued for this gene yet, NCBI gene IDs SHALL be used.
                    Comments

                    Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control1..1
                    BindingUnless not suitable, these codes SHALL be taken from HUGO Gene Nomenclature Committee Gene Names (HGNC)
                    (extensible to http://hl7.org/fhir/uv/genomics-reporting/ValueSet/hgnc-vs)
                    TypeCodeableConcept
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    146. Observation.component:gene-studied.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                    ShortWhy the component result is missing
                    Comments

                    "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    148. Observation.component:gene-studied.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortHigh, low, normal, etc.
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    150. Observation.component:gene-studied.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range.

                    ShortProvides guide for interpretation of component result
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    152. Observation.component:gene-mutations
                    Slice Namegene-mutations
                    Definition

                    Gene mutations that were tested for.

                    ShortGene Mutations ID
                    Comments

                    For a discussion on the ways Observations can be assembled in groups together see Notes below.

                    Control0..1
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    154. Observation.component:gene-mutations.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    156. Observation.component:gene-mutations.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    158. Observation.component:gene-mutations.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    160. Observation.component:gene-mutations.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "code".

                    Short36908-2
                    Comments

                    All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingFor example codes, see LOINCCodes
                    (example to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://loinc.org",
                        "code" : "36908-2"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    162. Observation.component:gene-mutations.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortActual component result
                    Comments

                    Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control1..1
                    BindingThe codes SHALL be taken from Human Genome Variation Society (HGVS) Nomenclature
                    (required to http://hl7.org/fhir/uv/genomics-reporting/ValueSet/hgvs-vs)
                    TypeCodeableConcept
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    164. Observation.component:gene-mutations.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                    ShortWhy the component result is missing
                    Comments

                    "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    166. Observation.component:gene-mutations.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortHigh, low, normal, etc.
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    168. Observation.component:gene-mutations.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range.

                    ShortProvides guide for interpretation of component result
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    170. Observation.component:region-description
                    Slice Nameregion-description
                    Definition

                    Description of region examined.

                    ShortRegion Description
                    Comments

                    For a discussion on the ways Observations can be assembled in groups together see Notes below.

                    Control0..1
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    172. Observation.component:region-description.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    174. Observation.component:region-description.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    176. Observation.component:region-description.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    178. Observation.component:region-description.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "code".

                    Short81293-3
                    Comments

                    All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingFor example codes, see LOINCCodes
                    (example to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://loinc.org",
                        "code" : "81293-3"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    180. Observation.component:region-description.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortActual component result
                    Comments

                    Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control0..1
                    Typestring
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    182. Observation.component:region-description.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                    ShortWhy the component result is missing
                    Comments

                    "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    184. Observation.component:region-description.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortHigh, low, normal, etc.
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    186. Observation.component:region-description.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range.

                    ShortProvides guide for interpretation of component result
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    188. Observation.component:region-coverage
                    Slice Nameregion-coverage
                    Definition

                    When sequencing, what % of the region was covered.

                    ShortRegion Coverage
                    Comments

                    For a discussion on the ways Observations can be assembled in groups together see Notes below.

                    Control0..1
                    TypeBackboneElement
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    190. Observation.component:region-coverage.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    192. Observation.component:region-coverage.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    194. Observation.component:region-coverage.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    196. Observation.component:region-coverage.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "code".

                    Shortregion-coverage
                    Comments

                    All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingFor example codes, see LOINCCodes
                    (example to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://hl7.org/fhir/uv/genomics-reporting/CodeSystem/tbd-codes-cs",
                        "code" : "region-coverage"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    198. Observation.component:region-coverage.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortActual component result
                    Comments

                    Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control0..1
                    TypeQuantity
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    200. Observation.component:region-coverage.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                    ShortWhy the component result is missing
                    Comments

                    "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    202. Observation.component:region-coverage.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortHigh, low, normal, etc.
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    204. Observation.component:region-coverage.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range.

                    ShortProvides guide for interpretation of component result
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    206. Observation.component:ranges-examined
                    Slice Nameranges-examined
                    Definition

                    This term is used to report the region(s) of interest for sequencing studies as one or more numeric ranges that identify the parts of the reference sequence that are sequenced. These can be recorded as one or more HL7 numeric ranges using repeat delimiters to seperate multiple such ranges.

                    ShortRange(s) of DNA sequence examined
                    Comments

                    For a discussion on the ways Observations can be assembled in groups together see Notes below.

                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    208. Observation.component:ranges-examined.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    210. Observation.component:ranges-examined.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    212. Observation.component:ranges-examined.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    214. Observation.component:ranges-examined.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "code".

                    Short51959-5
                    Comments

                    All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingFor example codes, see LOINCCodes
                    (example to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://loinc.org",
                        "code" : "51959-5"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    216. Observation.component:ranges-examined.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortActual component result
                    Comments

                    Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control0..1
                    TypeRange
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    218. Observation.component:ranges-examined.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                    ShortWhy the component result is missing
                    Comments

                    "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    220. Observation.component:ranges-examined.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortHigh, low, normal, etc.
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    222. Observation.component:ranges-examined.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range.

                    ShortProvides guide for interpretation of component result
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    224. Observation.component:coordinate-system
                    Slice Namecoordinate-system
                    Definition

                    These are different ways of identifying nucleotides or amino acids within a sequence. In the 1-based system, the first unit of the polymer (e.g. the first nucleotide) is counted as number 1. In the 0-based system, the number 0 designates the location before the first nucleotide. Different databases and file types may use different systems.

                    ShortCoordinate System
                    Comments

                    For a discussion on the ways Observations can be assembled in groups together see Notes below.

                    Control0..1
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    226. Observation.component:coordinate-system.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    228. Observation.component:coordinate-system.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    230. Observation.component:coordinate-system.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    232. Observation.component:coordinate-system.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "code".

                    Short92822-6
                    Comments

                    All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingFor example codes, see LOINCCodes
                    (example to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://loinc.org",
                        "code" : "92822-6"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    234. Observation.component:coordinate-system.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    Short0-based interval counting | 0-based character counting | 1-based character counting
                    Comments

                    Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control1..1
                    BindingUnless not suitable, these codes SHALL be taken from LOINC Answer List LL5323-2
                    (extensible to http://loinc.org/vs/LL5323-2)
                    TypeCodeableConcept
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    236. Observation.component:coordinate-system.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                    ShortWhy the component result is missing
                    Comments

                    "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    238. Observation.component:coordinate-system.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortHigh, low, normal, etc.
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    240. Observation.component:coordinate-system.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range.

                    ShortProvides guide for interpretation of component result
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    242. Observation.component:genomic-ref-seq
                    Slice Namegenomic-ref-seq
                    Definition

                    ID of the genomic reference sequence, which includes transcribed and non transcribed stretches.

                    ShortGenomic Reference Sequence
                    Comments

                    For a discussion on the ways Observations can be assembled in groups together see Notes below.

                    Control0..1
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    244. Observation.component:genomic-ref-seq.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    246. Observation.component:genomic-ref-seq.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    248. Observation.component:genomic-ref-seq.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    250. Observation.component:genomic-ref-seq.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "code".

                    Short48013-7
                    Comments

                    All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingFor example codes, see LOINCCodes
                    (example to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://loinc.org",
                        "code" : "48013-7"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    252. Observation.component:genomic-ref-seq.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortVersioned genomic reference sequence identifier.
                    Comments

                    Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control1..1
                    Binding

                    Multiple bindings acceptable (NCBI or LRG)

                    TypeCodeableConcept
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    254. Observation.component:genomic-ref-seq.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                    ShortWhy the component result is missing
                    Comments

                    "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    256. Observation.component:genomic-ref-seq.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortHigh, low, normal, etc.
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    258. Observation.component:genomic-ref-seq.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range.

                    ShortProvides guide for interpretation of component result
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    260. Observation.component:uncallable-regions
                    Slice Nameuncallable-regions
                    Definition

                    Contiguous region(s) where a call was not made.

                    ShortUncallable Sub-regions
                    Comments

                    For a discussion on the ways Observations can be assembled in groups together see Notes below.

                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    262. Observation.component:uncallable-regions.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    264. Observation.component:uncallable-regions.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    266. Observation.component:uncallable-regions.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    268. Observation.component:uncallable-regions.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "code".

                    Shortuncallable-regions
                    Comments

                    All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingFor example codes, see LOINCCodes
                    (example to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://hl7.org/fhir/uv/genomics-reporting/CodeSystem/tbd-codes-cs",
                        "code" : "uncallable-regions"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    270. Observation.component:uncallable-regions.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortMust be inside the range given by 'ranges examined' in the given reference sequence and coordinate system.
                    Comments

                    Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control0..1
                    TypeRange
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    272. Observation.component:uncallable-regions.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                    ShortWhy the component result is missing
                    Comments

                    "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    274. Observation.component:uncallable-regions.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortHigh, low, normal, etc.
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    276. Observation.component:uncallable-regions.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range.

                    ShortProvides guide for interpretation of component result
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))