Da Vinci Payer Data Exchange
2.1.1 - STU2 Ballot United States of America flag

Da Vinci Payer Data Exchange, published by HL7 International / Financial Management. This guide is not an authorized publication; it is the continuous build for version 2.1.1 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/davinci-epdx/ and changes regularly. See the Directory of published versions

Resource Profile: PDexProviderSharingConsent - Detailed Descriptions

Page standards status: Draft Maturity Level: 0

Definitions for the pdex-provider-consent resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Consent
Definition

This Consent profile conveys high-level computable information about a member's preference to not share information with providers,

2. Consent.status
Must Supporttrue
Fixed Valueactive
4. Consent.scope
Must Supporttrue
Pattern Value{
  "coding" : [{
    "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
    "code" : "patient-privacy"
  }]
}
6. Consent.category
SlicingThis element introduces a set of slices on Consent.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • pattern @ $this
  • 8. Consent.category:disclosure
    Slice Namedisclosure
    Control1..1
    Must Supporttrue
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
        "code" : "IDSCL"
      }]
    }
    10. Consent.patient
    Control1..?
    TypeReference(US Core Patient Profile)
    Must Supporttrue
    12. Consent.performer
    Control1..1
    TypeReference(US Core Patient Profile)
    Must Supporttrue
    14. Consent.organization
    Control1..1
    TypeReference(HRex Organization Profile)
    Must Supporttrue
    16. Consent.policyRule
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/consentpolicycodes",
        "code" : "cric",
        "display" : "Common Rule Informed Consent"
      }]
    }
    18. Consent.provision
    Control1..?
    Must Supporttrue
    20. Consent.provision.type
    Comments

    deny | permit. Member must actively choose to deny sharing. Absence of a record is interpreted as Permit.

    Control1..?
    Must Supporttrue
    22. Consent.provision.period
    Control1..?
    Must Supporttrue
    24. Consent.provision.period.start
    Control1..?
    Must Supporttrue
    26. Consent.provision.actor
    Control1..?
    SlicingThis element introduces a set of slices on Consent.provision.actor. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ role
    • 28. Consent.provision.actor:source
      Slice Namesource
      ShortAuthorized or Not to disclose
      Comments

      Multiple repetitions are allowed.

      Control1..*
      Must Supporttrue
      30. Consent.provision.actor:source.role
      Comments

      This code isn't in the value set, but there's no code that represents the function of 'discloser' or 'performer', so need to go outside the value set. Multiple

      Must Supporttrue
      Pattern Value{
        "coding" : [{
          "system" : "http://terminology.hl7.org/CodeSystem/provenance-participant-type",
          "code" : "performer"
        }]
      }
      32. Consent.provision.actor:source.reference
      TypeReference(HRex Organization Profile)
      Must Supporttrue
      34. Consent.provision.action
      Control1..1
      Pattern Value{
        "coding" : [{
          "system" : "http://terminology.hl7.org/CodeSystem/consentaction",
          "code" : "disclose"
        }]
      }

      Guidance on how to interpret the contents of this table can be found here

      0. Consent
      Definition

      This Consent profile conveys high-level computable information about a member's preference to not share information with providers,


      A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time.

      ShortA healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time
      Comments

      Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
      ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
      ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
      ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
      ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
      ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
      ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
      ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
      ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
      ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
      2. Consent.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      4. Consent.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      6. Consent.status
      Definition

      Indicates the current state of this consent.

      Shortdraft | proposed | active | rejected | inactive | entered-in-error
      Comments

      This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from ConsentStatehttp://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1
      (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

      Indicates the state of the consent.

      Typecode
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

      Fixed Valueactive
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Consent.scope
      Definition

      A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

      ShortWhich of the four areas this resource covers (extensible)
      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodeshttp://hl7.org/fhir/ValueSet/consent-scope
      (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

      The four anticipated uses for the Consent Resource.

      TypeCodeableConcept
      Is Modifiertrue because Allows changes to codes based on scope selection
      Must Supporttrue
      Summarytrue
      Pattern Value{
        "coding" : [{
          "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
          "code" : "patient-privacy"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Consent.category
      Definition

      A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

      ShortClassification of the consent statement - for indexing/retrieval
      Control1..*
      BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodeshttp://hl7.org/fhir/ValueSet/consent-category
      (extensible to http://hl7.org/fhir/ValueSet/consent-category)

      A classification of the type of consents found in a consent statement.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Consent.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • pattern @ $this
      • 12. Consent.category:disclosure
        Slice Namedisclosure
        Definition

        A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

        ShortClassification of the consent statement - for indexing/retrieval
        Control1..1*
        BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodeshttp://hl7.org/fhir/ValueSet/consent-category
        (extensible to http://hl7.org/fhir/ValueSet/consent-category)

        A classification of the type of consents found in a consent statement.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Pattern Value{
          "coding" : [{
            "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
            "code" : "IDSCL"
          }]
        }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. Consent.patient
        Definition

        The patient/healthcare consumer to whom this consent applies.

        ShortWho the consent applies to
        Comments

        Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

        Control10..1
        TypeReference(US Core Patient Profile, Patient)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. Consent.performer
        Definition

        Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions.

        ShortWho is agreeing to the policy and rules
        Comments

        Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian.

        Control10..1*
        TypeReference(US Core Patient Profile, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Alternate Namesconsentor
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. Consent.organization
        Definition

        The organization that manages the consent, and the framework within which it is executed.

        ShortCustodian of the consent
        Control10..1*
        TypeReference(HRex Organization Profile, Organization)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Alternate Namescustodian
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. Consent.policyRule
        Definition

        A reference to the specific base computable regulation or policy.

        ShortRegulation that this consents to
        Comments

        If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource.

        Control0..1
        This element is affected by the following invariants: ppc-1
        BindingUnless not suitable, these codes SHALL be taken from ConsentPolicyRuleCodeshttp://hl7.org/fhir/ValueSet/consent-policy
        (extensible to http://hl7.org/fhir/ValueSet/consent-policy)

        Regulatory policy examples.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Might be a unique identifier of a policy set in XACML, or other rules engine.

        Pattern Value{
          "coding" : [{
            "system" : "http://terminology.hl7.org/CodeSystem/consentpolicycodes",
            "code" : "cric",
            "display" : "Common Rule Informed Consent"
          }]
        }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Consent.provision
        Definition

        An exception to the base policy of this consent. An exception can be an addition or removal of access permissions.

        ShortConstraints to the base Consent.policyRule
        Control10..1
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. Consent.provision.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        26. Consent.provision.type
        Definition

        Action to take - permit or deny - when the rule conditions are met. Not permitted in root rule, required in all nested rules.

        Shortdeny | permit
        Comments

        deny | permit. Member must actively choose to deny sharing. Absence of a record is interpreted as Permit.

        Control10..1
        BindingThe codes SHALL be taken from ConsentProvisionTypehttp://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1
        (required to http://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1)

        How a rule statement is applied, such as adding additional consent or removing consent.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Consent.provision.period
        Definition

        The timeframe in this rule is valid.

        ShortTimeframe for this rule
        Control10..1
        TypePeriod
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Consent.provision.period.start
        Definition

        The start of the period. The boundary is inclusive.

        ShortStarting time with inclusive boundary
        Comments

        If the low element is missing, the meaning is that the low boundary is not known.

        Control10..1
        This element is affected by the following invariants: per-1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Consent.provision.actor
        Definition

        Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

        ShortWho|what controlled by this rule (or group, by role)
        Control10..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Meaning if MissingThere is no specific actor associated with the exception
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Consent.provision.actor. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • pattern @ role
        • 34. Consent.provision.actor.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          36. Consent.provision.actor.role
          Definition

          How the individual is involved in the resources content that is described in the exception.

          ShortHow the actor is involved
          Control1..1
          BindingUnless not suitable, these codes SHALL be taken from SecurityRoleTypehttp://hl7.org/fhir/ValueSet/security-role-type
          (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

          How an actor is involved in the consent considerations.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. Consent.provision.actor.reference
          Definition

          The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

          ShortResource for the actor (or group, by role)
          Control1..1
          TypeReference(Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. Consent.provision.actor:source
          Slice Namesource
          Definition

          Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

          ShortAuthorized or Not to discloseWho|what controlled by this rule (or group, by role)
          Comments

          Multiple repetitions are allowed.

          Control10..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Meaning if MissingThere is no specific actor associated with the exception
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. Consent.provision.actor:source.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          44. Consent.provision.actor:source.role
          Definition

          How the individual is involved in the resources content that is described in the exception.

          ShortHow the actor is involved
          Comments

          This code isn't in the value set, but there's no code that represents the function of 'discloser' or 'performer', so need to go outside the value set. Multiple

          Control1..1
          BindingUnless not suitable, these codes SHALL be taken from SecurityRoleTypehttp://hl7.org/fhir/ValueSet/security-role-type
          (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

          How an actor is involved in the consent considerations.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Pattern Value{
            "coding" : [{
              "system" : "http://terminology.hl7.org/CodeSystem/provenance-participant-type",
              "code" : "performer"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. Consent.provision.actor:source.reference
          Definition

          The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

          ShortResource for the actor (or group, by role)
          Control1..1
          TypeReference(HRex Organization Profile, Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. Consent.provision.action
          Definition

          Actions controlled by this Rule.

          ShortActions controlled by this rule
          Comments

          Note that this is the direct action (not the grounds for the action covered in the purpose element). At present, the only action in the understood and tested scope of this resource is 'read'.

          Control10..1*
          BindingFor example codes, see ConsentActionCodeshttp://hl7.org/fhir/ValueSet/consent-action
          (example to http://hl7.org/fhir/ValueSet/consent-action)

          Detailed codes for the consent action.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Meaning if Missingall actions
          Pattern Value{
            "coding" : [{
              "system" : "http://terminology.hl7.org/CodeSystem/consentaction",
              "code" : "disclose"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

          Guidance on how to interpret the contents of this table can be found here

          0. Consent
          Definition

          This Consent profile conveys high-level computable information about a member's preference to not share information with providers,

          ShortA healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time
          Comments

          Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

          Control0..*
          Is Modifierfalse
          Summaryfalse
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
          ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
          ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
          ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
          ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
          2. Consent.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Is Modifierfalse
          Summarytrue
          4. Consent.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. Consent.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. Consent.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHOULD be taken from CommonLanguages
          (preferred to http://hl7.org/fhir/ValueSet/languages)

          A human language.

          Additional BindingsPurpose
          AllLanguagesMax Binding
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. Consent.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          TypeNarrative
          Is Modifierfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. Consent.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

          Control0..*
          TypeResource
          Is Modifierfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. Consent.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          16. Consent.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
          Summaryfalse
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. Consent.identifier
          Definition

          Unique identifier for this copy of the Consent Statement.

          ShortIdentifier for this record (external references)
          Comments

          This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          20. Consent.status
          Definition

          Indicates the current state of this consent.

          Shortdraft | proposed | active | rejected | inactive | entered-in-error
          Comments

          This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

          Control1..1
          BindingThe codes SHALL be taken from ConsentState
          (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

          Indicates the state of the consent.

          Typecode
          Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

          Fixed Valueactive
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          22. Consent.scope
          Definition

          A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

          ShortWhich of the four areas this resource covers (extensible)
          Control1..1
          BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodes
          (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

          The four anticipated uses for the Consent Resource.

          TypeCodeableConcept
          Is Modifiertrue because Allows changes to codes based on scope selection
          Must Supporttrue
          Summarytrue
          Pattern Value{
            "coding" : [{
              "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
              "code" : "patient-privacy"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          24. Consent.category
          Definition

          A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

          ShortClassification of the consent statement - for indexing/retrieval
          Control1..*
          BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodes
          (extensible to http://hl7.org/fhir/ValueSet/consent-category)

          A classification of the type of consents found in a consent statement.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Consent.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • pattern @ $this
          • 26. Consent.category:disclosure
            Slice Namedisclosure
            Definition

            A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

            ShortClassification of the consent statement - for indexing/retrieval
            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodes
            (extensible to http://hl7.org/fhir/ValueSet/consent-category)

            A classification of the type of consents found in a consent statement.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Pattern Value{
              "coding" : [{
                "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
                "code" : "IDSCL"
              }]
            }
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            28. Consent.patient
            Definition

            The patient/healthcare consumer to whom this consent applies.

            ShortWho the consent applies to
            Comments

            Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

            Control1..1
            TypeReference(US Core Patient Profile)
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. Consent.dateTime
            Definition

            When this Consent was issued / created / indexed.

            ShortWhen this Consent was created or indexed
            Comments

            This is not the time of the original consent, but the time that this statement was made or derived.

            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            32. Consent.performer
            Definition

            Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions.

            ShortWho is agreeing to the policy and rules
            Comments

            Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian.

            Control1..1
            TypeReference(US Core Patient Profile)
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Alternate Namesconsentor
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            34. Consent.organization
            Definition

            The organization that manages the consent, and the framework within which it is executed.

            ShortCustodian of the consent
            Control1..1
            TypeReference(HRex Organization Profile)
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Alternate Namescustodian
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            36. Consent.source[x]
            Definition

            The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

            ShortSource from which this consent is taken
            Comments

            The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id.

            Control0..1
            TypeChoice of: Attachment, Reference(Consent, DocumentReference, Contract, QuestionnaireResponse)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            38. Consent.policy
            Definition

            The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

            ShortPolicies covered by this consent
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            40. Consent.policy.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            42. Consent.policy.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            44. Consent.policy.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            46. Consent.policy.authority
            Definition

            Entity or Organization having regulatory jurisdiction or accountability for enforcing policies pertaining to Consent Directives.

            ShortEnforcement source for policy
            Control0..1
            This element is affected by the following invariants: ppc-1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            48. Consent.policy.uri
            Definition

            The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

            ShortSpecific policy covered by this consent
            Comments

            This element is for discoverability / documentation and does not modify or qualify the policy rules.

            Control0..1
            This element is affected by the following invariants: ppc-1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            50. Consent.policyRule
            Definition

            A reference to the specific base computable regulation or policy.

            ShortRegulation that this consents to
            Comments

            If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource.

            Control0..1
            This element is affected by the following invariants: ppc-1
            BindingUnless not suitable, these codes SHALL be taken from ConsentPolicyRuleCodes
            (extensible to http://hl7.org/fhir/ValueSet/consent-policy)

            Regulatory policy examples.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Requirements

            Might be a unique identifier of a policy set in XACML, or other rules engine.

            Pattern Value{
              "coding" : [{
                "system" : "http://terminology.hl7.org/CodeSystem/consentpolicycodes",
                "code" : "cric",
                "display" : "Common Rule Informed Consent"
              }]
            }
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            52. Consent.verification
            Definition

            Whether a treatment instruction (e.g. artificial respiration yes or no) was verified with the patient, his/her family or another authorized person.

            ShortConsent Verified by patient or family
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. Consent.verification.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            56. Consent.verification.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            58. Consent.verification.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            60. Consent.verification.verified
            Definition

            Has the instruction been verified.

            ShortHas been verified
            Control1..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. Consent.verification.verifiedWith
            Definition

            Who verified the instruction (Patient, Relative or other Authorized Person).

            ShortPerson who verified
            Control0..1
            TypeReference(Patient, RelatedPerson)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            64. Consent.verification.verificationDate
            Definition

            Date verification was collected.

            ShortWhen consent verified
            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. Consent.provision
            Definition

            An exception to the base policy of this consent. An exception can be an addition or removal of access permissions.

            ShortConstraints to the base Consent.policyRule
            Control1..1
            TypeBackboneElement
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. Consent.provision.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            70. Consent.provision.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            72. Consent.provision.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            74. Consent.provision.type
            Definition

            Action to take - permit or deny - when the rule conditions are met. Not permitted in root rule, required in all nested rules.

            Shortdeny | permit
            Comments

            deny | permit. Member must actively choose to deny sharing. Absence of a record is interpreted as Permit.

            Control1..1
            BindingThe codes SHALL be taken from ConsentProvisionType
            (required to http://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1)

            How a rule statement is applied, such as adding additional consent or removing consent.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            76. Consent.provision.period
            Definition

            The timeframe in this rule is valid.

            ShortTimeframe for this rule
            Control1..1
            TypePeriod
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            78. Consent.provision.period.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            80. Consent.provision.period.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Consent.provision.period.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 82. Consent.provision.period.start
              Definition

              The start of the period. The boundary is inclusive.

              ShortStarting time with inclusive boundary
              Comments

              If the low element is missing, the meaning is that the low boundary is not known.

              Control1..1
              This element is affected by the following invariants: per-1
              TypedateTime
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              84. Consent.provision.period.end
              Definition

              The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

              ShortEnd time with inclusive boundary, if not ongoing
              Comments

              The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

              Control0..1
              This element is affected by the following invariants: per-1
              TypedateTime
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              86. Consent.provision.actor
              Definition

              Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

              ShortWho|what controlled by this rule (or group, by role)
              Control1..*
              TypeBackboneElement
              Is Modifierfalse
              Summaryfalse
              Meaning if MissingThere is no specific actor associated with the exception
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Consent.provision.actor. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • pattern @ role
              • 88. Consent.provision.actor.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                90. Consent.provision.actor.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                92. Consent.provision.actor.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                94. Consent.provision.actor.role
                Definition

                How the individual is involved in the resources content that is described in the exception.

                ShortHow the actor is involved
                Control1..1
                BindingUnless not suitable, these codes SHALL be taken from SecurityRoleType
                (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

                How an actor is involved in the consent considerations.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                96. Consent.provision.actor.reference
                Definition

                The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                ShortResource for the actor (or group, by role)
                Control1..1
                TypeReference(Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                98. Consent.provision.actor:source
                Slice Namesource
                Definition

                Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                ShortAuthorized or Not to disclose
                Comments

                Multiple repetitions are allowed.

                Control1..*
                TypeBackboneElement
                Is Modifierfalse
                Must Supporttrue
                Summaryfalse
                Meaning if MissingThere is no specific actor associated with the exception
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                100. Consent.provision.actor:source.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                102. Consent.provision.actor:source.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                104. Consent.provision.actor:source.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                106. Consent.provision.actor:source.role
                Definition

                How the individual is involved in the resources content that is described in the exception.

                ShortHow the actor is involved
                Comments

                This code isn't in the value set, but there's no code that represents the function of 'discloser' or 'performer', so need to go outside the value set. Multiple

                Control1..1
                BindingUnless not suitable, these codes SHALL be taken from SecurityRoleType
                (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

                How an actor is involved in the consent considerations.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supporttrue
                Summaryfalse
                Pattern Value{
                  "coding" : [{
                    "system" : "http://terminology.hl7.org/CodeSystem/provenance-participant-type",
                    "code" : "performer"
                  }]
                }
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                108. Consent.provision.actor:source.reference
                Definition

                The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                ShortResource for the actor (or group, by role)
                Control1..1
                TypeReference(HRex Organization Profile)
                Is Modifierfalse
                Must Supporttrue
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                110. Consent.provision.action
                Definition

                Actions controlled by this Rule.

                ShortActions controlled by this rule
                Comments

                Note that this is the direct action (not the grounds for the action covered in the purpose element). At present, the only action in the understood and tested scope of this resource is 'read'.

                Control1..1
                BindingFor example codes, see ConsentActionCodes
                (example to http://hl7.org/fhir/ValueSet/consent-action)

                Detailed codes for the consent action.

                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Meaning if Missingall actions
                Pattern Value{
                  "coding" : [{
                    "system" : "http://terminology.hl7.org/CodeSystem/consentaction",
                    "code" : "disclose"
                  }]
                }
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                112. Consent.provision.securityLabel
                Definition

                A security label, comprised of 0..* security label fields (Privacy tags), which define which resources are controlled by this exception.

                ShortSecurity Labels that define affected resources
                Comments

                If the consent specifies a security label of "R" then it applies to all resources that are labeled "R" or lower. E.g. for Confidentiality, it's a high water mark. For other kinds of security labels, subsumption logic applies. When the purpose of use tag is on the data, access request purpose of use shall not conflict.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from All Security Labels
                (extensible to http://hl7.org/fhir/ValueSet/security-labels)

                Security Labels from the Healthcare Privacy and Security Classification System.

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                114. Consent.provision.purpose
                Definition

                The context of the activities a user is taking - why the user is accessing the data - that are controlled by this rule.

                ShortContext of activities covered by this rule
                Comments

                When the purpose of use tag is on the data, access request purpose of use shall not conflict.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from PurposeOfUse
                (extensible to http://terminology.hl7.org/ValueSet/v3-PurposeOfUse)

                What purposes of use are controlled by this exception. If more than one label is specified, operations must have all the specified labels.

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                116. Consent.provision.class
                Definition

                The class of information covered by this rule. The type can be a FHIR resource type, a profile on a type, or a CDA document, or some other type that indicates what sort of information the consent relates to.

                Shorte.g. Resource Type, Profile, CDA, etc.
                Comments

                Multiple types are or'ed together. The intention of the contentType element is that the codes refer to profiles or document types defined in a standard or an implementation guide somewhere.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from ConsentContentClass
                (extensible to http://hl7.org/fhir/ValueSet/consent-content-class)

                The class (type) of information a consent rule covers.

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                118. Consent.provision.code
                Definition

                If this code is found in an instance, then the rule applies.

                Shorte.g. LOINC or SNOMED CT code, etc. in the content
                Comments

                Typical use of this is a Document code with class = CDA.

                Control0..*
                BindingFor example codes, see ConsentContentCodes
                (example to http://hl7.org/fhir/ValueSet/consent-content-code)

                If this code is found in an instance, then the exception applies.

                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                120. Consent.provision.dataPeriod
                Definition

                Clinical or Operational Relevant period of time that bounds the data controlled by this rule.

                ShortTimeframe for data controlled by this rule
                Comments

                This has a different sense to the Consent.period - that is when the consent agreement holds. This is the time period of the data that is controlled by the agreement.

                Control0..1
                TypePeriod
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                122. Consent.provision.data
                Definition

                The resources controlled by this rule if specific resources are referenced.

                ShortData controlled by this rule
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summarytrue
                Meaning if Missingall data
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                124. Consent.provision.data.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                126. Consent.provision.data.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                128. Consent.provision.data.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                130. Consent.provision.data.meaning
                Definition

                How the resource reference is interpreted when testing consent restrictions.

                Shortinstance | related | dependents | authoredby
                Control1..1
                BindingThe codes SHALL be taken from ConsentDataMeaning
                (required to http://hl7.org/fhir/ValueSet/consent-data-meaning|4.0.1)

                How a resource reference is interpreted when testing consent restrictions.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                132. Consent.provision.data.reference
                Definition

                A reference to a specific resource that defines which resources are covered by this consent.

                ShortThe actual data reference
                Control1..1
                TypeReference(Resource)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                134. Consent.provision.provision
                Definition

                Rules which provide exceptions to the base rule or subrules.

                ShortNested Exception Rules
                Control0..*
                TypeSeettp://hl7.org/fhir/StructureDefinition/Consent#Consent.provision
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))