Uzbekistan Digital Health Platform
0.13.0 - ci-build Uzbekistan flag

Uzbekistan Digital Health Platform, published by Ministry of Health of the Republic of Uzbekistan. This guide is not an authorized publication; it is the continuous build for version 0.13.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/uzinfocom-org/digital-health-ig/ and changes regularly. See the Directory of published versions

Resource Profile: UZ Core MedicationDispense ( Experimental )

Official URL: https://dhp.uz/fhir/core/StructureDefinition/uz-core-medication-dispense Version: 0.13.0
Active as of 2026-02-06 Computable Name: UZCoreMedicationDispense

Uzbekistan Core MedicationDispense profile, used to record the provision of a medication to a patient

UZ Core MedicationDispense records that a medicine was handed over: a pharmacy supplying a prescribed medicine to the patient or to the person collecting it, or a hospital pharmacy issuing a medicine for a patient on a ward. It says which Medication was supplied and how much, for which Patient, who prepared and handed it over, who received it, and when. A dispense points to the prescription it fulfils, a MedicationRequest, in authorizingPrescription. That link lets the State Health Insurance Fund reconcile what was ordered with what was supplied, as the e-Prescription and dispensing workflow describes. Use this profile for the supply of the medicine; when a dose is given to the patient, record a MedicationAdministration.

Mandatory and Must Support data elements

The elements below must always be present (mandatory) or must be supported when the data is available (Must Support). Not all of them are required, but your system must populate each Must Support element when it has the data, and process it on receipt. This is the human-readable summary; the formal views below give the exact cardinalities, types and terminology bindings.

Each UZ Core MedicationDispense Must Have

This profile adds no mandatory elements, but the base MedicationDispense resource requires three: the status, the medication and the subject. Each performer must name its actor.

Each UZ Core MedicationDispense Must Support

  • the dispense number (identifier);
  • the status of the dispense (preparation / in-progress / cancelled / on-hold / completed / entered-in-error / stopped / declined / unknown), why it was not performed (notPerformedReason) and when the status last changed (statusChanged);
  • the category: where the medicine will be used (inpatient / outpatient / community);
  • the medication, as a UZ Core Medication reference or an ATC or INN code;
  • the patient (subject);
  • who dispensed it (performer.actor), such as the pharmacist and the pharmacy;
  • the prescription it fulfils (authorizingPrescription);
  • the quantity handed over, with its value, unit, system and code;
  • when the dispense was recorded (recorded), prepared (whenPrepared) and handed over (whenHandedOver);
  • who or where received it (receiver).

Building the JSON, step by step

The examples below go from the smallest valid dispense to a declined one. Each one validates against this profile. The complete reference instances are the outpatient paracetamol dispense and the amoxicillin dispense.

The smallest MedicationDispense you should send

Every UZ Core resource names its profile in meta.profile, which tells the server which rules to validate against. On top of that, the base resource requires status, medication and subject. This much passes validation:

{
  "resourceType": "MedicationDispense",
  "meta": { "profile": ["https://dhp.uz/fhir/core/StructureDefinition/uz-core-medication-dispense"] },
  "status": "completed",
  "medication": { "reference": { "reference": "Medication/example-medication" } },
  "subject": { "reference": "Patient/example-salim" }
}

medication is a CodeableReference: a reference to a UZ Core Medication sits under reference (one level deeper than a plain Reference), and a code sits under concept. See References and CodeableReferences. status uses HL7 codes. Their English displays come from the base code system and their Uzbek and Russian ones from a DHP supplement, so you can leave display out.

Dispensing a prescription at a pharmacy

The pharmacist scans the QR code on the prescription, retrieves the MedicationRequest and hands the patient the ten paracetamol tablets it orders. authorizingPrescription points to the prescription, performer names the pharmacist and the pharmacy, and the three timestamps record when the medicine was prepared, handed over and recorded:

{
  "resourceType": "MedicationDispense",
  "meta": { "profile": ["https://dhp.uz/fhir/core/StructureDefinition/uz-core-medication-dispense"] },
  "identifier": [ { "value": "MD-2026-00002" } ],
  "status": "completed",
  "category": [
    { "coding": [ { "system": "http://hl7.org/fhir/medicationdispense-admin-location", "code": "outpatient" } ] }
  ],
  "medication": { "reference": { "reference": "Medication/example-medication" } },
  "subject": { "reference": "Patient/example-salim" },
  "performer": [
    { "actor": { "reference": "Practitioner/example-practitioner" } },
    { "actor": { "reference": "Organization/tashkent-diseases-hospital" } }
  ],
  "authorizingPrescription": [ { "reference": "MedicationRequest/example-medication-request" } ],
  "quantity": {
    "value": 10,
    "unit": "piece",
    "system": "https://terminology.dhp.uz/fhir/core/CodeSystem/medication-total-volume-local-units-cs",
    "code": "piece"
  },
  "recorded": "2026-03-02T11:05:00+05:00",
  "whenPrepared": "2026-03-02T10:50:00+05:00",
  "whenHandedOver": "2026-03-02T11:00:00+05:00",
  "receiver": [ { "reference": "Patient/example-salim" } ]
}

quantity.code is a required binding to the total volume units: UCUM for mass and volume, the local units code system for countable units such as a piece. Always send system and code, not only the human-readable unit (see Units and quantities). A pharmacy may dispense a prescription in parts: each part is its own completed dispense for the quantity handed over, and the prescription stays active until the whole quantity has been supplied.

A medicine collected by a relative

When a relative collects the medicine, as the trustee named on the prescription, receiver points to that RelatedPerson. Here the medicine is given as a code rather than a catalogue reference:

{
  "resourceType": "MedicationDispense",
  "meta": { "profile": ["https://dhp.uz/fhir/core/StructureDefinition/uz-core-medication-dispense"] },
  "language": "en",
  "status": "completed",
  "medication": {
    "concept": {
      "coding": [
        {
          "system": "https://terminology.dhp.uz/fhir/core/CodeSystem/inn-medication-name-cs",
          "code": "005325",
          "display": "paracetamol"
        }
      ]
    }
  },
  "subject": { "reference": "Patient/example-salim" },
  "performer": [ { "actor": { "reference": "Organization/tashkent-diseases-hospital" } } ],
  "authorizingPrescription": [ { "reference": "MedicationRequest/example-medication-request" } ],
  "quantity": {
    "value": 10,
    "unit": "piece",
    "system": "https://terminology.dhp.uz/fhir/core/CodeSystem/medication-total-volume-local-units-cs",
    "code": "piece"
  },
  "whenHandedOver": "2026-03-02T11:00:00+05:00",
  "receiver": [ { "reference": "RelatedPerson/example-related-person" } ]
}

medication.concept is a required binding to the medication classification value set: an INN code names the substance, an ATC code (http://www.whocc.no/atc) places it in the WHO classification. The display must match the resource language. receiver can also be a Practitioner, a PractitionerRole such as a patronage nurse delivering the medicine at home, or the Location the medicine was delivered to.

A dispense that did not happen

When the pharmacy cannot supply a prescribed medicine, record the dispense with status set to declined, the reason in notPerformedReason and the time in statusChanged:

{
  "resourceType": "MedicationDispense",
  "meta": { "profile": ["https://dhp.uz/fhir/core/StructureDefinition/uz-core-medication-dispense"] },
  "status": "declined",
  "statusChanged": "2026-03-02T11:00:00+05:00",
  "notPerformedReason": {
    "concept": {
      "coding": [
        { "system": "http://hl7.org/fhir/CodeSystem/medicationdispense-status-reason", "code": "outofstock" }
      ]
    }
  },
  "medication": { "reference": { "reference": "Medication/example-medication" } },
  "subject": { "reference": "Patient/example-salim" },
  "authorizingPrescription": [ { "reference": "MedicationRequest/example-medication-request" } ]
}

notPerformedReason is a CodeableReference: a coded reason goes in concept, and a reference to a DetectedIssue, such as a drug interaction found by a safety check, goes in reference. The prescription stays active, so the patient can collect the medicine elsewhere.

For example API calls, see the Quick Start at the bottom of this page.

Usages:

You can also check for usages in the FHIR IG Statistics

Formal Views of Profile Content

Description Differentials, Snapshots, and other representations.

NameFlagsCard.TypeDescription & Constraints    Filter: doco
MedicationDispense C 0..* MedicationDispense(5.0.0) Dispensing a medication to a named patient
Constraints: mdd-1
MedicationDispense.implicitRules This element is a modifier element. This element is included in summaries. 0..1 uri A set of rules under which this content was created
MedicationDispense.contained 0..* Resource Contained, inline Resources
MedicationDispense.modifierExtension This element is a modifier element. This element is included in summaries. 0..* Extension Extensions that cannot be ignored
Constraints: ext-1
MedicationDispense.identifier This element must be supported. 0..* Identifier External identifier
MedicationDispense.status This element is a modifier element. This element must be supported. This element is included in summaries. 1..1 code preparation | in-progress | cancelled | on-hold | completed | entered-in-error | stopped | declined | unknown
Binding: MedicationDispenseStatusVS (0.13.0) (required)
MedicationDispense.notPerformedReason This element must be supported. 0..1 CodeableReference(DetectedIssue) Why a dispense was not performed
Binding: MedicationDispenseStatusReasonVS (0.13.0) (preferred)
MedicationDispense.statusChanged This element must be supported. 0..1 dateTime When the status changed
MedicationDispense.category This element must be supported. 0..* CodeableConcept Type of medication dispense
Binding: MedicationDispenseAdminLocationVS (0.13.0) (preferred)
MedicationDispense.medication This element must be supported. This element is included in summaries. 1..1 CodeableReference(UZ Core Medication(0.13.0)) What medication was supplied
Binding: MedicationClassificationVS (0.13.0) (required)
MedicationDispense.subject This element must be supported. This element is included in summaries. 1..1 Reference(UZ Core Patient(0.13.0) | Group) Who the dispense is for
MedicationDispense.performer This element must be supported. 0..* BackboneElement Who performed event
MedicationDispense.performer.modifierExtension This element is a modifier element. This element is included in summaries. 0..* Extension Extensions that cannot be ignored even if unrecognized
Constraints: ext-1
MedicationDispense.performer.actor This element must be supported. 1..1 Reference(UZ Core Practitioner(0.13.0) | UZ Core PractitionerRole(0.13.0) | UZ Core Organization(0.13.0) | UZ Core Patient(0.13.0) | UZ Core Device(0.13.0) | UZ Core RelatedPerson(0.13.0) | CareTeam) Individual who was performing
MedicationDispense.authorizingPrescription This element must be supported. 0..* Reference(UZ Core MedicationRequest(0.13.0)) Medication order that authorizes the dispense
MedicationDispense.quantity This element must be supported. C 0..1 SimpleQuantity(5.0.0) Amount dispensed
Constraints: sqty-1
MedicationDispense.quantity.value This element must be supported. This element is included in summaries. 0..1 decimal Numerical value (with implicit precision)
MedicationDispense.quantity.unit This element must be supported. This element is included in summaries. 0..1 string Unit representation
MedicationDispense.quantity.system This element must be supported. This element is included in summaries. C 0..1 uri System that defines coded unit form
MedicationDispense.quantity.code This element must be supported. This element is included in summaries. C 0..1 code Coded form of the unit
Binding: MedicationTotalVolumeUnitsVS (0.13.0) (required)
MedicationDispense.recorded This element must be supported. 0..1 dateTime When the recording of the dispense started
MedicationDispense.whenPrepared This element must be supported. This element is included in summaries. C 0..1 dateTime When product was packaged and reviewed
MedicationDispense.whenHandedOver This element must be supported. C 0..1 dateTime When product was given out
MedicationDispense.receiver This element must be supported. 0..* Reference(UZ Core Patient(0.13.0) | UZ Core Practitioner(0.13.0) | UZ Core RelatedPerson(0.13.0) | UZ Core Location(0.13.0) | UZ Core PractitionerRole(0.13.0)) Who collected the medication or where the medication was delivered

doco Documentation for this format

Terminology Bindings

Path Status Usage ValueSet Version Source
MedicationDispense.status Base required MedicationDispense status 📍0.13.0 This IG
MedicationDispense.notPerformedReason Base preferred MedicationDispense status reason 📍0.13.0 This IG
MedicationDispense.category Base preferred MedicationDispense admin location 📍0.13.0 This IG
MedicationDispense.medication Base required Medication classification (ATC and INN) 📍0.13.0 This IG
MedicationDispense.quantity.​code Base required Medication total volume unit 📍0.13.0 This IG

Constraints

Id Grade Path(s) Description Expression

This structure is derived from MedicationDispense

NameFlagsCard.TypeDescription & Constraints    Filter: doco
MedicationDispense 0..* MedicationDispense(5.0.0) Dispensing a medication to a named patient
MedicationDispense.identifier This element must be supported. 0..* Identifier External identifier
MedicationDispense.status This element must be supported. 1..1 code preparation | in-progress | cancelled | on-hold | completed | entered-in-error | stopped | declined | unknown
Binding: MedicationDispenseStatusVS (0.13.0) (required)
MedicationDispense.notPerformedReason This element must be supported. 0..1 CodeableReference(DetectedIssue) Why a dispense was not performed
Binding: MedicationDispenseStatusReasonVS (0.13.0) (preferred)
MedicationDispense.category This element must be supported. 0..* CodeableConcept Type of medication dispense
Binding: MedicationDispenseAdminLocationVS (0.13.0) (preferred)
MedicationDispense.medication This element must be supported. 1..1 CodeableReference(UZ Core Medication(0.13.0)) What medication was supplied
Binding: MedicationClassificationVS (0.13.0) (required)
MedicationDispense.subject This element must be supported. 1..1 Reference(UZ Core Patient(0.13.0) | Group) Who the dispense is for
MedicationDispense.performer This element must be supported. 0..* BackboneElement Who performed event
MedicationDispense.performer.actor This element must be supported. 1..1 Reference(UZ Core Practitioner(0.13.0) | UZ Core PractitionerRole(0.13.0) | UZ Core Organization(0.13.0) | UZ Core Patient(0.13.0) | UZ Core Device(0.13.0) | UZ Core RelatedPerson(0.13.0) | CareTeam) Individual who was performing
MedicationDispense.authorizingPrescription This element must be supported. 0..* Reference(UZ Core MedicationRequest(0.13.0)) Medication order that authorizes the dispense
MedicationDispense.quantity This element must be supported. 0..1 SimpleQuantity(5.0.0) Amount dispensed
MedicationDispense.quantity.value This element must be supported. 0..1 decimal Numerical value (with implicit precision)
MedicationDispense.quantity.unit This element must be supported. 0..1 string Unit representation
MedicationDispense.quantity.system This element must be supported. 0..1 uri System that defines coded unit form
MedicationDispense.quantity.code This element must be supported. 0..1 code Coded form of the unit
Binding: MedicationTotalVolumeUnitsVS (0.13.0) (required)
MedicationDispense.recorded This element must be supported. 0..1 dateTime When the recording of the dispense started
MedicationDispense.whenPrepared This element must be supported. 0..1 dateTime When product was packaged and reviewed
MedicationDispense.whenHandedOver This element must be supported. 0..1 dateTime When product was given out
MedicationDispense.receiver This element must be supported. 0..* Reference(UZ Core Patient(0.13.0) | UZ Core Practitioner(0.13.0) | UZ Core RelatedPerson(0.13.0) | UZ Core Location(0.13.0) | UZ Core PractitionerRole(0.13.0)) Who collected the medication or where the medication was delivered

doco Documentation for this format

Terminology Bindings (Differential)

Path Status Usage ValueSet Version Source
MedicationDispense.status Base required MedicationDispense status 📍0.13.0 This IG
MedicationDispense.notPerformedReason Base preferred MedicationDispense status reason 📍0.13.0 This IG
MedicationDispense.category Base preferred MedicationDispense admin location 📍0.13.0 This IG
MedicationDispense.medication Base required Medication classification (ATC and INN) 📍0.13.0 This IG
MedicationDispense.quantity.​code Base required Medication total volume unit 📍0.13.0 This IG
NameFlagsCard.TypeDescription & Constraints    Filter: doco
MedicationDispense C 0..* MedicationDispense(5.0.0) Dispensing a medication to a named patient
Constraints: mdd-1
MedicationDispense.id This element is included in summaries. 0..1 id Logical id of this artifact
MedicationDispense.meta This element is included in summaries. 0..1 Meta Metadata about the resource
MedicationDispense.implicitRules This element is a modifier element. This element is included in summaries. 0..1 uri A set of rules under which this content was created
MedicationDispense.language 0..1 code Language of the resource content
Binding: AllLanguages (required): IETF language tag for a human language
Additional BindingsPurpose
CommonLanguages Starter
MedicationDispense.text 0..1 Narrative Text summary of the resource, for human interpretation
This profile does not constrain the narrative in regard to content, language, or traceability to data elements
MedicationDispense.contained 0..* Resource Contained, inline Resources
MedicationDispense.extension 0..* Extension Additional content defined by implementations
Constraints: ext-1
MedicationDispense.modifierExtension This element is a modifier element. This element is included in summaries. 0..* Extension Extensions that cannot be ignored
Constraints: ext-1
MedicationDispense.identifier This element must be supported. 0..* Identifier External identifier
MedicationDispense.basedOn 0..* Reference(CarePlan) Plan that is fulfilled by this dispense
MedicationDispense.partOf 0..* Reference(Procedure | MedicationAdministration) Event that dispense is part of
MedicationDispense.status This element is a modifier element. This element must be supported. This element is included in summaries. 1..1 code preparation | in-progress | cancelled | on-hold | completed | entered-in-error | stopped | declined | unknown
Binding: MedicationDispenseStatusVS (0.13.0) (required)
MedicationDispense.notPerformedReason This element must be supported. 0..1 CodeableReference(DetectedIssue) Why a dispense was not performed
Binding: MedicationDispenseStatusReasonVS (0.13.0) (preferred)
MedicationDispense.statusChanged This element must be supported. 0..1 dateTime When the status changed
MedicationDispense.category This element must be supported. 0..* CodeableConcept Type of medication dispense
Binding: MedicationDispenseAdminLocationVS (0.13.0) (preferred)
MedicationDispense.medication This element must be supported. This element is included in summaries. 1..1 CodeableReference(UZ Core Medication(0.13.0)) What medication was supplied
Binding: MedicationClassificationVS (0.13.0) (required)
MedicationDispense.subject This element must be supported. This element is included in summaries. 1..1 Reference(UZ Core Patient(0.13.0) | Group) Who the dispense is for
MedicationDispense.encounter 0..1 Reference(Encounter) Encounter associated with event
MedicationDispense.supportingInformation 0..* Reference(Resource) Information that supports the dispensing of the medication
MedicationDispense.performer This element must be supported. 0..* BackboneElement Who performed event
MedicationDispense.performer.id 0..1 string Unique id for inter-element referencing
MedicationDispense.performer.extension 0..* Extension Additional content defined by implementations
Constraints: ext-1
MedicationDispense.performer.modifierExtension This element is a modifier element. This element is included in summaries. 0..* Extension Extensions that cannot be ignored even if unrecognized
Constraints: ext-1
MedicationDispense.performer.function 0..1 CodeableConcept Who performed the dispense and what they did
Binding: MedicationDispensePerformerFunctionCodes (example): A code describing the role an individual played in dispensing a medication.
MedicationDispense.performer.actor This element must be supported. 1..1 Reference(UZ Core Practitioner(0.13.0) | UZ Core PractitionerRole(0.13.0) | UZ Core Organization(0.13.0) | UZ Core Patient(0.13.0) | UZ Core Device(0.13.0) | UZ Core RelatedPerson(0.13.0) | CareTeam) Individual who was performing
MedicationDispense.location 0..1 Reference(Location) Where the dispense occurred
MedicationDispense.authorizingPrescription This element must be supported. 0..* Reference(UZ Core MedicationRequest(0.13.0)) Medication order that authorizes the dispense
MedicationDispense.type 0..1 CodeableConcept Trial fill, partial fill, emergency fill, etc
Binding: ActPharmacySupplyType (3.0.0) (example): ActPharmacySupplyType
MedicationDispense.quantity This element must be supported. C 0..1 SimpleQuantity(5.0.0) Amount dispensed
Constraints: sqty-1
MedicationDispense.quantity.id 0..1 id Unique id for inter-element referencing
MedicationDispense.quantity.extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
MedicationDispense.quantity.value This element must be supported. This element is included in summaries. 0..1 decimal Numerical value (with implicit precision)
MedicationDispense.quantity.unit This element must be supported. This element is included in summaries. 0..1 string Unit representation
MedicationDispense.quantity.system This element must be supported. This element is included in summaries. C 0..1 uri System that defines coded unit form
MedicationDispense.quantity.code This element must be supported. This element is included in summaries. C 0..1 code Coded form of the unit
Binding: MedicationTotalVolumeUnitsVS (0.13.0) (required)
MedicationDispense.daysSupply C 0..1 SimpleQuantity(5.0.0) Amount of medication expressed as a timing amount
Constraints: sqty-1
MedicationDispense.recorded This element must be supported. 0..1 dateTime When the recording of the dispense started
MedicationDispense.whenPrepared This element must be supported. This element is included in summaries. C 0..1 dateTime When product was packaged and reviewed
MedicationDispense.whenHandedOver This element must be supported. C 0..1 dateTime When product was given out
MedicationDispense.destination 0..1 Reference(Location) Where the medication was/will be sent
MedicationDispense.receiver This element must be supported. 0..* Reference(UZ Core Patient(0.13.0) | UZ Core Practitioner(0.13.0) | UZ Core RelatedPerson(0.13.0) | UZ Core Location(0.13.0) | UZ Core PractitionerRole(0.13.0)) Who collected the medication or where the medication was delivered
MedicationDispense.note 0..* Annotation Information about the dispense
MedicationDispense.renderedDosageInstruction 0..1 markdown Full representation of the dosage instructions
MedicationDispense.dosageInstruction 0..* Dosage How the medication is to be used by the patient or administered by the caregiver
MedicationDispense.substitution 0..1 BackboneElement Whether a substitution was performed on the dispense
MedicationDispense.substitution.id 0..1 string Unique id for inter-element referencing
MedicationDispense.substitution.extension 0..* Extension Additional content defined by implementations
Constraints: ext-1
MedicationDispense.substitution.modifierExtension This element is a modifier element. This element is included in summaries. 0..* Extension Extensions that cannot be ignored even if unrecognized
Constraints: ext-1
MedicationDispense.substitution.wasSubstituted 1..1 boolean Whether a substitution was or was not performed on the dispense
MedicationDispense.substitution.type 0..1 CodeableConcept Code signifying whether a different drug was dispensed from what was prescribed
Binding: ActSubstanceAdminSubstitutionCode (3.0.0) (example): ActSubstanceAdminSubstitutionCode
MedicationDispense.substitution.reason 0..* CodeableConcept Why was substitution made
Binding: SubstanceAdminSubstitutionReason (3.0.0) (example): SubstanceAdminSubstitutionReason
MedicationDispense.substitution.responsibleParty 0..1 Reference(Practitioner | PractitionerRole | Organization) Who is responsible for the substitution
MedicationDispense.eventHistory 0..* Reference(Provenance) A list of relevant lifecycle events

doco Documentation for this format

Terminology Bindings

Path Status Usage ValueSet Version Source
MedicationDispense.language Base required All Languages 📍5.0.0 FHIR Std.
MedicationDispense.status Base required MedicationDispense status 📍0.13.0 This IG
MedicationDispense.notPerformedReason Base preferred MedicationDispense status reason 📍0.13.0 This IG
MedicationDispense.category Base preferred MedicationDispense admin location 📍0.13.0 This IG
MedicationDispense.medication Base required Medication classification (ATC and INN) 📍0.13.0 This IG
MedicationDispense.performer.​function Base example MedicationDispense Performer Function Codes 📍5.0.0 FHIR Std.
MedicationDispense.type Base example ActPharmacySupplyType 📍3.0.0 THO v7.5
MedicationDispense.quantity.​code Base required Medication total volume unit 📍0.13.0 This IG
MedicationDispense.substitution.​type Base example ActSubstanceAdminSubstitutionCode 📍3.0.0 THO v7.5
MedicationDispense.substitution.​reason Base example SubstanceAdminSubstitutionReason 📍3.0.0 THO v7.5

Constraints

Id Grade Path(s) Description Expression

Key Elements View

NameFlagsCard.TypeDescription & Constraints    Filter: doco
MedicationDispense C 0..* MedicationDispense(5.0.0) Dispensing a medication to a named patient
Constraints: mdd-1
MedicationDispense.implicitRules This element is a modifier element. This element is included in summaries. 0..1 uri A set of rules under which this content was created
MedicationDispense.contained 0..* Resource Contained, inline Resources
MedicationDispense.modifierExtension This element is a modifier element. This element is included in summaries. 0..* Extension Extensions that cannot be ignored
Constraints: ext-1
MedicationDispense.identifier This element must be supported. 0..* Identifier External identifier
MedicationDispense.status This element is a modifier element. This element must be supported. This element is included in summaries. 1..1 code preparation | in-progress | cancelled | on-hold | completed | entered-in-error | stopped | declined | unknown
Binding: MedicationDispenseStatusVS (0.13.0) (required)
MedicationDispense.notPerformedReason This element must be supported. 0..1 CodeableReference(DetectedIssue) Why a dispense was not performed
Binding: MedicationDispenseStatusReasonVS (0.13.0) (preferred)
MedicationDispense.statusChanged This element must be supported. 0..1 dateTime When the status changed
MedicationDispense.category This element must be supported. 0..* CodeableConcept Type of medication dispense
Binding: MedicationDispenseAdminLocationVS (0.13.0) (preferred)
MedicationDispense.medication This element must be supported. This element is included in summaries. 1..1 CodeableReference(UZ Core Medication(0.13.0)) What medication was supplied
Binding: MedicationClassificationVS (0.13.0) (required)
MedicationDispense.subject This element must be supported. This element is included in summaries. 1..1 Reference(UZ Core Patient(0.13.0) | Group) Who the dispense is for
MedicationDispense.performer This element must be supported. 0..* BackboneElement Who performed event
MedicationDispense.performer.modifierExtension This element is a modifier element. This element is included in summaries. 0..* Extension Extensions that cannot be ignored even if unrecognized
Constraints: ext-1
MedicationDispense.performer.actor This element must be supported. 1..1 Reference(UZ Core Practitioner(0.13.0) | UZ Core PractitionerRole(0.13.0) | UZ Core Organization(0.13.0) | UZ Core Patient(0.13.0) | UZ Core Device(0.13.0) | UZ Core RelatedPerson(0.13.0) | CareTeam) Individual who was performing
MedicationDispense.authorizingPrescription This element must be supported. 0..* Reference(UZ Core MedicationRequest(0.13.0)) Medication order that authorizes the dispense
MedicationDispense.quantity This element must be supported. C 0..1 SimpleQuantity(5.0.0) Amount dispensed
Constraints: sqty-1
MedicationDispense.quantity.value This element must be supported. This element is included in summaries. 0..1 decimal Numerical value (with implicit precision)
MedicationDispense.quantity.unit This element must be supported. This element is included in summaries. 0..1 string Unit representation
MedicationDispense.quantity.system This element must be supported. This element is included in summaries. C 0..1 uri System that defines coded unit form
MedicationDispense.quantity.code This element must be supported. This element is included in summaries. C 0..1 code Coded form of the unit
Binding: MedicationTotalVolumeUnitsVS (0.13.0) (required)
MedicationDispense.recorded This element must be supported. 0..1 dateTime When the recording of the dispense started
MedicationDispense.whenPrepared This element must be supported. This element is included in summaries. C 0..1 dateTime When product was packaged and reviewed
MedicationDispense.whenHandedOver This element must be supported. C 0..1 dateTime When product was given out
MedicationDispense.receiver This element must be supported. 0..* Reference(UZ Core Patient(0.13.0) | UZ Core Practitioner(0.13.0) | UZ Core RelatedPerson(0.13.0) | UZ Core Location(0.13.0) | UZ Core PractitionerRole(0.13.0)) Who collected the medication or where the medication was delivered

doco Documentation for this format

Terminology Bindings

Path Status Usage ValueSet Version Source
MedicationDispense.status Base required MedicationDispense status 📍0.13.0 This IG
MedicationDispense.notPerformedReason Base preferred MedicationDispense status reason 📍0.13.0 This IG
MedicationDispense.category Base preferred MedicationDispense admin location 📍0.13.0 This IG
MedicationDispense.medication Base required Medication classification (ATC and INN) 📍0.13.0 This IG
MedicationDispense.quantity.​code Base required Medication total volume unit 📍0.13.0 This IG

Constraints

Id Grade Path(s) Description Expression

Differential View

This structure is derived from MedicationDispense

NameFlagsCard.TypeDescription & Constraints    Filter: doco
MedicationDispense 0..* MedicationDispense(5.0.0) Dispensing a medication to a named patient
MedicationDispense.identifier This element must be supported. 0..* Identifier External identifier
MedicationDispense.status This element must be supported. 1..1 code preparation | in-progress | cancelled | on-hold | completed | entered-in-error | stopped | declined | unknown
Binding: MedicationDispenseStatusVS (0.13.0) (required)
MedicationDispense.notPerformedReason This element must be supported. 0..1 CodeableReference(DetectedIssue) Why a dispense was not performed
Binding: MedicationDispenseStatusReasonVS (0.13.0) (preferred)
MedicationDispense.statusChanged This element must be supported. 0..1 dateTime When the status changed
MedicationDispense.category This element must be supported. 0..* CodeableConcept Type of medication dispense
Binding: MedicationDispenseAdminLocationVS (0.13.0) (preferred)
MedicationDispense.medication This element must be supported. 1..1 CodeableReference(UZ Core Medication(0.13.0)) What medication was supplied
Binding: MedicationClassificationVS (0.13.0) (required)
MedicationDispense.subject This element must be supported. 1..1 Reference(UZ Core Patient(0.13.0) | Group) Who the dispense is for
MedicationDispense.performer This element must be supported. 0..* BackboneElement Who performed event
MedicationDispense.performer.actor This element must be supported. 1..1 Reference(UZ Core Practitioner(0.13.0) | UZ Core PractitionerRole(0.13.0) | UZ Core Organization(0.13.0) | UZ Core Patient(0.13.0) | UZ Core Device(0.13.0) | UZ Core RelatedPerson(0.13.0) | CareTeam) Individual who was performing
MedicationDispense.authorizingPrescription This element must be supported. 0..* Reference(UZ Core MedicationRequest(0.13.0)) Medication order that authorizes the dispense
MedicationDispense.quantity This element must be supported. 0..1 SimpleQuantity(5.0.0) Amount dispensed
MedicationDispense.quantity.value This element must be supported. 0..1 decimal Numerical value (with implicit precision)
MedicationDispense.quantity.unit This element must be supported. 0..1 string Unit representation
MedicationDispense.quantity.system This element must be supported. 0..1 uri System that defines coded unit form
MedicationDispense.quantity.code This element must be supported. 0..1 code Coded form of the unit
Binding: MedicationTotalVolumeUnitsVS (0.13.0) (required)
MedicationDispense.recorded This element must be supported. 0..1 dateTime When the recording of the dispense started
MedicationDispense.whenPrepared This element must be supported. 0..1 dateTime When product was packaged and reviewed
MedicationDispense.whenHandedOver This element must be supported. 0..1 dateTime When product was given out
MedicationDispense.receiver This element must be supported. 0..* Reference(UZ Core Patient(0.13.0) | UZ Core Practitioner(0.13.0) | UZ Core RelatedPerson(0.13.0) | UZ Core Location(0.13.0) | UZ Core PractitionerRole(0.13.0)) Who collected the medication or where the medication was delivered

doco Documentation for this format

Terminology Bindings (Differential)

Path Status Usage ValueSet Version Source
MedicationDispense.status Base required MedicationDispense status 📍0.13.0 This IG
MedicationDispense.notPerformedReason Base preferred MedicationDispense status reason 📍0.13.0 This IG
MedicationDispense.category Base preferred MedicationDispense admin location 📍0.13.0 This IG
MedicationDispense.medication Base required Medication classification (ATC and INN) 📍0.13.0 This IG
MedicationDispense.quantity.​code Base required Medication total volume unit 📍0.13.0 This IG

Snapshot ViewView

NameFlagsCard.TypeDescription & Constraints    Filter: doco
MedicationDispense C 0..* MedicationDispense(5.0.0) Dispensing a medication to a named patient
Constraints: mdd-1
MedicationDispense.id This element is included in summaries. 0..1 id Logical id of this artifact
MedicationDispense.meta This element is included in summaries. 0..1 Meta Metadata about the resource
MedicationDispense.implicitRules This element is a modifier element. This element is included in summaries. 0..1 uri A set of rules under which this content was created
MedicationDispense.language 0..1 code Language of the resource content
Binding: AllLanguages (required): IETF language tag for a human language
Additional BindingsPurpose
CommonLanguages Starter
MedicationDispense.text 0..1 Narrative Text summary of the resource, for human interpretation
This profile does not constrain the narrative in regard to content, language, or traceability to data elements
MedicationDispense.contained 0..* Resource Contained, inline Resources
MedicationDispense.extension 0..* Extension Additional content defined by implementations
Constraints: ext-1
MedicationDispense.modifierExtension This element is a modifier element. This element is included in summaries. 0..* Extension Extensions that cannot be ignored
Constraints: ext-1
MedicationDispense.identifier This element must be supported. 0..* Identifier External identifier
MedicationDispense.basedOn 0..* Reference(CarePlan) Plan that is fulfilled by this dispense
MedicationDispense.partOf 0..* Reference(Procedure | MedicationAdministration) Event that dispense is part of
MedicationDispense.status This element is a modifier element. This element must be supported. This element is included in summaries. 1..1 code preparation | in-progress | cancelled | on-hold | completed | entered-in-error | stopped | declined | unknown
Binding: MedicationDispenseStatusVS (0.13.0) (required)
MedicationDispense.notPerformedReason This element must be supported. 0..1 CodeableReference(DetectedIssue) Why a dispense was not performed
Binding: MedicationDispenseStatusReasonVS (0.13.0) (preferred)
MedicationDispense.statusChanged This element must be supported. 0..1 dateTime When the status changed
MedicationDispense.category This element must be supported. 0..* CodeableConcept Type of medication dispense
Binding: MedicationDispenseAdminLocationVS (0.13.0) (preferred)
MedicationDispense.medication This element must be supported. This element is included in summaries. 1..1 CodeableReference(UZ Core Medication(0.13.0)) What medication was supplied
Binding: MedicationClassificationVS (0.13.0) (required)
MedicationDispense.subject This element must be supported. This element is included in summaries. 1..1 Reference(UZ Core Patient(0.13.0) | Group) Who the dispense is for
MedicationDispense.encounter 0..1 Reference(Encounter) Encounter associated with event
MedicationDispense.supportingInformation 0..* Reference(Resource) Information that supports the dispensing of the medication
MedicationDispense.performer This element must be supported. 0..* BackboneElement Who performed event
MedicationDispense.performer.id 0..1 string Unique id for inter-element referencing
MedicationDispense.performer.extension 0..* Extension Additional content defined by implementations
Constraints: ext-1
MedicationDispense.performer.modifierExtension This element is a modifier element. This element is included in summaries. 0..* Extension Extensions that cannot be ignored even if unrecognized
Constraints: ext-1
MedicationDispense.performer.function 0..1 CodeableConcept Who performed the dispense and what they did
Binding: MedicationDispensePerformerFunctionCodes (example): A code describing the role an individual played in dispensing a medication.
MedicationDispense.performer.actor This element must be supported. 1..1 Reference(UZ Core Practitioner(0.13.0) | UZ Core PractitionerRole(0.13.0) | UZ Core Organization(0.13.0) | UZ Core Patient(0.13.0) | UZ Core Device(0.13.0) | UZ Core RelatedPerson(0.13.0) | CareTeam) Individual who was performing
MedicationDispense.location 0..1 Reference(Location) Where the dispense occurred
MedicationDispense.authorizingPrescription This element must be supported. 0..* Reference(UZ Core MedicationRequest(0.13.0)) Medication order that authorizes the dispense
MedicationDispense.type 0..1 CodeableConcept Trial fill, partial fill, emergency fill, etc
Binding: ActPharmacySupplyType (3.0.0) (example): ActPharmacySupplyType
MedicationDispense.quantity This element must be supported. C 0..1 SimpleQuantity(5.0.0) Amount dispensed
Constraints: sqty-1
MedicationDispense.quantity.id 0..1 id Unique id for inter-element referencing
MedicationDispense.quantity.extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
MedicationDispense.quantity.value This element must be supported. This element is included in summaries. 0..1 decimal Numerical value (with implicit precision)
MedicationDispense.quantity.unit This element must be supported. This element is included in summaries. 0..1 string Unit representation
MedicationDispense.quantity.system This element must be supported. This element is included in summaries. C 0..1 uri System that defines coded unit form
MedicationDispense.quantity.code This element must be supported. This element is included in summaries. C 0..1 code Coded form of the unit
Binding: MedicationTotalVolumeUnitsVS (0.13.0) (required)
MedicationDispense.daysSupply C 0..1 SimpleQuantity(5.0.0) Amount of medication expressed as a timing amount
Constraints: sqty-1
MedicationDispense.recorded This element must be supported. 0..1 dateTime When the recording of the dispense started
MedicationDispense.whenPrepared This element must be supported. This element is included in summaries. C 0..1 dateTime When product was packaged and reviewed
MedicationDispense.whenHandedOver This element must be supported. C 0..1 dateTime When product was given out
MedicationDispense.destination 0..1 Reference(Location) Where the medication was/will be sent
MedicationDispense.receiver This element must be supported. 0..* Reference(UZ Core Patient(0.13.0) | UZ Core Practitioner(0.13.0) | UZ Core RelatedPerson(0.13.0) | UZ Core Location(0.13.0) | UZ Core PractitionerRole(0.13.0)) Who collected the medication or where the medication was delivered
MedicationDispense.note 0..* Annotation Information about the dispense
MedicationDispense.renderedDosageInstruction 0..1 markdown Full representation of the dosage instructions
MedicationDispense.dosageInstruction 0..* Dosage How the medication is to be used by the patient or administered by the caregiver
MedicationDispense.substitution 0..1 BackboneElement Whether a substitution was performed on the dispense
MedicationDispense.substitution.id 0..1 string Unique id for inter-element referencing
MedicationDispense.substitution.extension 0..* Extension Additional content defined by implementations
Constraints: ext-1
MedicationDispense.substitution.modifierExtension This element is a modifier element. This element is included in summaries. 0..* Extension Extensions that cannot be ignored even if unrecognized
Constraints: ext-1
MedicationDispense.substitution.wasSubstituted 1..1 boolean Whether a substitution was or was not performed on the dispense
MedicationDispense.substitution.type 0..1 CodeableConcept Code signifying whether a different drug was dispensed from what was prescribed
Binding: ActSubstanceAdminSubstitutionCode (3.0.0) (example): ActSubstanceAdminSubstitutionCode
MedicationDispense.substitution.reason 0..* CodeableConcept Why was substitution made
Binding: SubstanceAdminSubstitutionReason (3.0.0) (example): SubstanceAdminSubstitutionReason
MedicationDispense.substitution.responsibleParty 0..1 Reference(Practitioner | PractitionerRole | Organization) Who is responsible for the substitution
MedicationDispense.eventHistory 0..* Reference(Provenance) A list of relevant lifecycle events

doco Documentation for this format

Terminology Bindings

Path Status Usage ValueSet Version Source
MedicationDispense.language Base required All Languages 📍5.0.0 FHIR Std.
MedicationDispense.status Base required MedicationDispense status 📍0.13.0 This IG
MedicationDispense.notPerformedReason Base preferred MedicationDispense status reason 📍0.13.0 This IG
MedicationDispense.category Base preferred MedicationDispense admin location 📍0.13.0 This IG
MedicationDispense.medication Base required Medication classification (ATC and INN) 📍0.13.0 This IG
MedicationDispense.performer.​function Base example MedicationDispense Performer Function Codes 📍5.0.0 FHIR Std.
MedicationDispense.type Base example ActPharmacySupplyType 📍3.0.0 THO v7.5
MedicationDispense.quantity.​code Base required Medication total volume unit 📍0.13.0 This IG
MedicationDispense.substitution.​type Base example ActSubstanceAdminSubstitutionCode 📍3.0.0 THO v7.5
MedicationDispense.substitution.​reason Base example SubstanceAdminSubstitutionReason 📍3.0.0 THO v7.5

Constraints

Id Grade Path(s) Description Expression

 

Other representations of profile: CSV, Excel, Schematron

Quick Start

Common API interactions for this profile. Requests require a JWT access token - see Security and authentication. [base] is the FHIR server base URL; | separates a code system from its value and must be URL-encoded as %7C.

Read a dispense by server id, and its earlier versions

GET [base]/MedicationDispense/[id]
GET [base]/MedicationDispense/[id]/_history

Find dispenses

# every dispense against a prescription
GET [base]/MedicationDispense?prescription=MedicationRequest/[id]

# by dispense number
GET [base]/MedicationDispense?identifier=MD-2026-00002

# by medication, as a catalogue reference or a code
GET [base]/MedicationDispense?medication=Medication/[id]
GET [base]/MedicationDispense?code=https://terminology.dhp.uz/fhir/core/CodeSystem/inn-medication-name-cs|005325

Other useful searches

GET [base]/MedicationDispense?patient=Patient/[id]&status=completed
GET [base]/MedicationDispense?patient=Patient/[id]&whenhandedover=ge2026-01-01
GET [base]/MedicationDispense?performer=Organization/[id]&whenhandedover=ge2026-03-01
GET [base]/MedicationDispense?receiver=RelatedPerson/[id]
GET [base]/MedicationDispense?prescription=MedicationRequest/[id]&_include=MedicationDispense:prescription

Record a dispense

POST [base]/MedicationDispense
{
  "resourceType": "MedicationDispense",
  "meta": { "profile": [ "https://dhp.uz/fhir/core/StructureDefinition/uz-core-medication-dispense" ] },
  "status": "completed",
  "medication": { "reference": { "reference": "Medication/[id]" } },
  "subject": { "reference": "Patient/[id]" },
  "authorizingPrescription": [ { "reference": "MedicationRequest/[id]" } ],
  "quantity": { ... },
  "whenHandedOver": "2026-03-02T11:00:00+05:00",
  ...
}

Update an existing dispense (e.g. set status to completed once the medicine is handed over)

PUT [base]/MedicationDispense/[id]
If-Match: W/"3"   # the ETag from your last read; 412 if it changed since
{
  "resourceType": "MedicationDispense",
  "id": "[id]",
  "meta": { "profile": [ "https://dhp.uz/fhir/core/StructureDefinition/uz-core-medication-dispense" ] },
  "status": "completed",
  ...
}

See the CapabilityStatement for the full list of supported search parameters.