XpanDH Hospital Discharge Report, published by XpanDH Project. This guide is not an authorized publication; it is the continuous build for version 0.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/hl7-eu/xpandh-hdr/ and changes regularly. See the Directory of published versions

• Content
• Detailed Descriptions
• Mappings
• XML
• JSON
• TTL

Resource Profile: Observation Results: radiology

This profile constrains the Observation resource to represent results produced by pathology studies for the XpanDH project.

Usage:

• This Resource Profile is not used by any profiles in this Implementation Guide

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

• Differential Table
• Key Elements Table
• Snapshot Table
• Statistics/References
• All

This structure is derived from ObservationResultsRadiologyUvIps

Name	Flags	Card.	Type	Description & Constraints
Observation		0..*	ObservationResultsRadiologyUvIps	Measurements and simple assertions
Documentation for this format

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	ObservationResultsRadiologyUvIps	Measurements and simple assertions dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated dom-5: If a resource is contained in another resource, it SHALL NOT have a security label dom-6: A resource should have narrative for robust management obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present hasMemberOrComponent: component and hasMember are mutually exclusive hasComponentifValueStringEmpty: component is required if valueString is empty
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created ele-1: All FHIR elements must have a @value or children
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
status	?!Σ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation. ele-1: All FHIR elements must have a @value or children Fixed Value: final
Slices for category		1..*	CodeableConceptIPS	Concept - reference to a terminology or just text Slice: Unordered, Open by pattern:$this Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. ele-1: All FHIR elements must have a @value or children
category:radiology	S	1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
code		1..1	code	Symbol in syntax defined by the system Fixed Value: imaging
code	S	1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Observation - IPS (extensible) ele-1: All FHIR elements must have a @value or children
subject	SΣ	1..1	Reference(Patient (IPS))	Who and/or what the observation is about ele-1: All FHIR elements must have a @value or children
reference	SΣC	1..1	string	Literal reference, Relative, internal or absolute URL ele-1: All FHIR elements must have a @value or children
effective[x]	SΣC	1..1		Clinically relevant time/time-period for observation ele-1: All FHIR elements must have a @value or children ips-1: Datetime must be at least to day.
effective[x]All Types				Content/Rules for all Types
Slices for extension				Content/Rules for all slices
data-absent-reason	S	0..1	code	effective[x] absence reason URL: http://hl7.org/fhir/StructureDefinition/data-absent-reason Binding: DataAbsentReason (required) ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
effectiveDateTime			dateTime
effectivePeriod			Period
performer	SΣ	1..*	Reference(Practitioner (IPS) | PractitionerRole (IPS) | Organization (IPS) | CareTeam | Patient (IPS) | RelatedPerson)	Who is responsible for the observation ele-1: All FHIR elements must have a @value or children
Slices for value[x]	SΣC	0..1		Actual result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueString	SΣC	0..1	string	Actual result ele-1: All FHIR elements must have a @value or children
Slices for component	SΣ	0..*	BackboneElement	Component results Slice: Unordered, Closed by type:value ele-1: All FHIR elements must have a @value or children
component:All Slices				Content/Rules for all slices
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children
component:observationText	SΣ	0..*	BackboneElement	Observation Text ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Textual Observations (SNOMED-DICOM-LOINC) - IPS (extensible) ele-1: All FHIR elements must have a @value or children
value[x]	Σ	1..1	string	Actual component result ele-1: All FHIR elements must have a @value or children
component:observationCode	SΣ	0..*	BackboneElement	Observation Code ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Observation - IPS (extensible) ele-1: All FHIR elements must have a @value or children
value[x]		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text ele-1: All FHIR elements must have a @value or children
component:numericQuantityMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume quantity measurements ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements ele-1: All FHIR elements must have a @value or children
value[x]	C	1..1	QuantityIPS	A measured amount using UCUM ele-1: All FHIR elements must have a @value or children qty-3: If a code for the unit is present, the system SHALL also be present
component:numericRangeMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume range measurements ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements ele-1: All FHIR elements must have a @value or children
value[x]	C	1..1	RangeIPS	Set of values bounded by low and high ele-1: All FHIR elements must have a @value or children rng-2: If present, low SHALL have a lower value than high
component:numericRatioMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume ratio measurements ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements ele-1: All FHIR elements must have a @value or children
value[x]	C	1..1	RatioIPS	A ratio of two Quantity values - a numerator and a denominator ele-1: All FHIR elements must have a @value or children rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present
component:numericSampledDataMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume sampled data measurements ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements ele-1: All FHIR elements must have a @value or children
value[x]	Σ	1..1	SampledData	Actual component result ele-1: All FHIR elements must have a @value or children
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.status	required	Fixed Value: final http://hl7.org/fhir/ValueSet/observation-status|4.0.1 from the FHIR Standard
Observation.category	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.category:radiology	preferred	Pattern: imaging http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.code	extensible	ResultsRadiologyObservationUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-observations-uv-ips
Observation.component.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:observationText.code	extensible	ResultsRadiologyTextualObservationsSnomedDicomLoincUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-txtobs-snomed-dicom-loinc-uv-ips
Observation.component:observationCode.code	extensible	ResultsRadiologyObservationUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-observations-uv-ips
Observation.component:numericQuantityMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericRangeMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericRatioMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericSampledDataMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
hasComponentifValueStringEmpty	error	Observation	component is required if valueString is empty : (component.exists() and valueString.empty()) or valueString.exists()
hasMemberOrComponent	error	Observation	component and hasMember are mutually exclusive : hasMember.empty() or component.empty()
ips-1	error	Observation.effective[x]	Datetime must be at least to day. : $this.ofType(dateTime).empty() or ($this as dateTime).toString().length() >= 8
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()
qty-3	error	Observation.component:numericQuantityMeasurement.value[x]	If a code for the unit is present, the system SHALL also be present : code.empty() or system.exists()
rat-1	error	Observation.component:numericRatioMeasurement.value[x]	Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present : (numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())
rng-2	error	Observation.component:numericRangeMeasurement.value[x]	If present, low SHALL have a lower value than high : low.empty() or high.empty() or (low <= high)

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	ObservationResultsRadiologyUvIps	Measurements and simple assertions obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present hasMemberOrComponent: component and hasMember are mutually exclusive hasComponentifValueStringEmpty: component is required if valueString is empty
id	Σ	0..1	id	Logical id of this artifact
meta	Σ	0..1	Meta	Metadata about the resource
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred): A human language. Additional Bindings Purpose AllLanguages Max Binding
text		0..1	Narrative	Text summary of the resource, for human interpretation
contained		0..*	Resource	Contained, inline Resources
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
identifier	Σ	0..*	Identifier	Business Identifier for observation
basedOn	Σ	0..*	Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)	Fulfills plan, proposal or order
partOf	Σ	0..*	Reference(Imaging Study (IPS))	Part of referenced event
status	?!Σ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation. Fixed Value: final
Slices for category		1..*	CodeableConceptIPS	Concept - reference to a terminology or just text Slice: Unordered, Open by pattern:$this Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
category:radiology	S	1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: imaging
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
code	S	1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Observation - IPS (extensible)
subject	SΣ	1..1	Reference(Patient (IPS))	Who and/or what the observation is about
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
reference	SΣC	1..1	string	Literal reference, Relative, internal or absolute URL
type	Σ	0..1	uri	Type the reference refers to (e.g. "Patient") Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).
identifier	Σ	0..1	Identifier	Logical reference, when literal reference is not known
display	Σ	0..1	string	Text alternative for the resource
focus	Σ	0..*	Reference(Resource)	What the observation is about, when it is not about the subject of record
encounter	Σ	0..1	Reference(Encounter)	Healthcare event during which this observation is made
effective[x]	SΣC	1..1		Clinically relevant time/time-period for observation ips-1: Datetime must be at least to day.
effective[x]All Types				Content/Rules for all Types
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
data-absent-reason	S	0..1	code	effective[x] absence reason URL: http://hl7.org/fhir/StructureDefinition/data-absent-reason Binding: DataAbsentReason (required)
effectiveDateTime			dateTime
effectivePeriod			Period
issued	Σ	0..1	instant	Date/Time this version was made available
performer	SΣ	1..*	Reference(Practitioner (IPS) | PractitionerRole (IPS) | Organization (IPS) | CareTeam | Patient (IPS) | RelatedPerson)	Who is responsible for the observation
Slices for value[x]	SΣC	0..1		Actual result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueString	SΣC	0..1	string	Actual result
dataAbsentReason	C	0..1	CodeableConcept	Why the result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
note		0..*	Annotation	Comments about the observation
bodySite		0..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.
method		0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
specimen		0..1	Reference(Specimen)	Specimen used for this observation
device		0..1	Reference(Device - performer, observer)	(Measurement) Device
referenceRange	C	0..*	BackboneElement	Provides guide for interpretation obs-3: Must have at least a low or a high or text
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	C	0..1	SimpleQuantity	Low Range, if relevant
high	C	0..1	SimpleQuantity	High Range, if relevant
type		0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
appliesTo		0..*	CodeableConcept	Reference range population Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
age		0..1	Range	Applicable age range, if relevant
text		0..1	string	Text based reference range in an observation
hasMember	Σ	0..*	Reference(Observation Results: radiology (IPS) | Observation Results (IPS))	Related resource that belongs to the Observation group
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
reference	ΣC	0..1	string	Literal reference, Relative, internal or absolute URL
type	Σ	0..1	uri	Type the reference refers to (e.g. "Patient") Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).
identifier	Σ	0..1	Identifier	Logical reference, when literal reference is not known
display	Σ	0..1	string	Text alternative for the resource
derivedFrom	Σ	0..*	Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | Observation | MolecularSequence)	Related measurements the observation is made from
Slices for component	SΣ	0..*	BackboneElement	Component results Slice: Unordered, Closed by type:value
component:All Slices				Content/Rules for all slices
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
value[x]	Σ	0..1		Actual component result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:observationText	SΣ	0..*	BackboneElement	Observation Text
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Textual Observations (SNOMED-DICOM-LOINC) - IPS (extensible)
value[x]	Σ	1..1	string	Actual component result
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:observationCode	SΣ	0..*	BackboneElement	Observation Code
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Observation - IPS (extensible)
value[x]		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:numericQuantityMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume quantity measurements
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements
value[x]	C	1..1	QuantityIPS	A measured amount using UCUM qty-3: If a code for the unit is present, the system SHALL also be present
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:numericRangeMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume range measurements
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements
value[x]	C	1..1	RangeIPS	Set of values bounded by low and high rng-2: If present, low SHALL have a lower value than high
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:numericRatioMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume ratio measurements
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements
value[x]	C	1..1	RatioIPS	A ratio of two Quantity values - a numerator and a denominator rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:numericSampledDataMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume sampled data measurements
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements
value[x]	Σ	1..1	SampledData	Actual component result
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.language	preferred	CommonLanguages http://hl7.org/fhir/ValueSet/languages from the FHIR Standard Additional Bindings Purpose AllLanguages Max Binding
Observation.status	required	Fixed Value: final http://hl7.org/fhir/ValueSet/observation-status|4.0.1 from the FHIR Standard
Observation.category	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.category:radiology	preferred	Pattern: imaging http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.code	extensible	ResultsRadiologyObservationUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-observations-uv-ips
Observation.subject.type	extensible	ResourceType http://hl7.org/fhir/ValueSet/resource-types from the FHIR Standard
Observation.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.bodySite	example	SNOMEDCTBodyStructures http://hl7.org/fhir/ValueSet/body-site from the FHIR Standard
Observation.method	example	ObservationMethods http://hl7.org/fhir/ValueSet/observation-methods from the FHIR Standard
Observation.referenceRange.type	preferred	ObservationReferenceRangeMeaningCodes http://hl7.org/fhir/ValueSet/referencerange-meaning from the FHIR Standard
Observation.referenceRange.appliesTo	example	ObservationReferenceRangeAppliesToCodes http://hl7.org/fhir/ValueSet/referencerange-appliesto from the FHIR Standard
Observation.hasMember.type	extensible	ResourceType http://hl7.org/fhir/ValueSet/resource-types from the FHIR Standard
Observation.component.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:observationText.code	extensible	ResultsRadiologyTextualObservationsSnomedDicomLoincUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-txtobs-snomed-dicom-loinc-uv-ips
Observation.component:observationText.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:observationText.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:observationCode.code	extensible	ResultsRadiologyObservationUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-observations-uv-ips
Observation.component:observationCode.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:observationCode.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:numericQuantityMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericQuantityMeasurement.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:numericQuantityMeasurement.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:numericRangeMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericRangeMeasurement.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:numericRangeMeasurement.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:numericRatioMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericRatioMeasurement.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:numericRatioMeasurement.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:numericSampledDataMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericSampledDataMeasurement.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:numericSampledDataMeasurement.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
hasComponentifValueStringEmpty	error	Observation	component is required if valueString is empty : (component.exists() and valueString.empty()) or valueString.exists()
hasMemberOrComponent	error	Observation	component and hasMember are mutually exclusive : hasMember.empty() or component.empty()
ips-1	error	Observation.effective[x]	Datetime must be at least to day. : $this.ofType(dateTime).empty() or ($this as dateTime).toString().length() >= 8
obs-3	error	Observation.referenceRange	Must have at least a low or a high or text : low.exists() or high.exists() or text.exists()
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()
qty-3	error	Observation.component:numericQuantityMeasurement.value[x]	If a code for the unit is present, the system SHALL also be present : code.empty() or system.exists()
rat-1	error	Observation.component:numericRatioMeasurement.value[x]	Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present : (numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())
rng-2	error	Observation.component:numericRangeMeasurement.value[x]	If present, low SHALL have a lower value than high : low.empty() or high.empty() or (low <= high)

This structure is derived from ObservationResultsRadiologyUvIps

Summary

Differential View

This structure is derived from ObservationResultsRadiologyUvIps

Name	Flags	Card.	Type	Description & Constraints
Observation		0..*	ObservationResultsRadiologyUvIps	Measurements and simple assertions
Documentation for this format

Key Elements View

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	ObservationResultsRadiologyUvIps	Measurements and simple assertions dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated dom-5: If a resource is contained in another resource, it SHALL NOT have a security label dom-6: A resource should have narrative for robust management obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present hasMemberOrComponent: component and hasMember are mutually exclusive hasComponentifValueStringEmpty: component is required if valueString is empty
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created ele-1: All FHIR elements must have a @value or children
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
status	?!Σ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation. ele-1: All FHIR elements must have a @value or children Fixed Value: final
Slices for category		1..*	CodeableConceptIPS	Concept - reference to a terminology or just text Slice: Unordered, Open by pattern:$this Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. ele-1: All FHIR elements must have a @value or children
category:radiology	S	1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
code		1..1	code	Symbol in syntax defined by the system Fixed Value: imaging
code	S	1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Observation - IPS (extensible) ele-1: All FHIR elements must have a @value or children
subject	SΣ	1..1	Reference(Patient (IPS))	Who and/or what the observation is about ele-1: All FHIR elements must have a @value or children
reference	SΣC	1..1	string	Literal reference, Relative, internal or absolute URL ele-1: All FHIR elements must have a @value or children
effective[x]	SΣC	1..1		Clinically relevant time/time-period for observation ele-1: All FHIR elements must have a @value or children ips-1: Datetime must be at least to day.
effective[x]All Types				Content/Rules for all Types
Slices for extension				Content/Rules for all slices
data-absent-reason	S	0..1	code	effective[x] absence reason URL: http://hl7.org/fhir/StructureDefinition/data-absent-reason Binding: DataAbsentReason (required) ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
effectiveDateTime			dateTime
effectivePeriod			Period
performer	SΣ	1..*	Reference(Practitioner (IPS) | PractitionerRole (IPS) | Organization (IPS) | CareTeam | Patient (IPS) | RelatedPerson)	Who is responsible for the observation ele-1: All FHIR elements must have a @value or children
Slices for value[x]	SΣC	0..1		Actual result Slice: Unordered, Open by type:$this ele-1: All FHIR elements must have a @value or children
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueString	SΣC	0..1	string	Actual result ele-1: All FHIR elements must have a @value or children
Slices for component	SΣ	0..*	BackboneElement	Component results Slice: Unordered, Closed by type:value ele-1: All FHIR elements must have a @value or children
component:All Slices				Content/Rules for all slices
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. ele-1: All FHIR elements must have a @value or children
component:observationText	SΣ	0..*	BackboneElement	Observation Text ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Textual Observations (SNOMED-DICOM-LOINC) - IPS (extensible) ele-1: All FHIR elements must have a @value or children
value[x]	Σ	1..1	string	Actual component result ele-1: All FHIR elements must have a @value or children
component:observationCode	SΣ	0..*	BackboneElement	Observation Code ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Observation - IPS (extensible) ele-1: All FHIR elements must have a @value or children
value[x]		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text ele-1: All FHIR elements must have a @value or children
component:numericQuantityMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume quantity measurements ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements ele-1: All FHIR elements must have a @value or children
value[x]	C	1..1	QuantityIPS	A measured amount using UCUM ele-1: All FHIR elements must have a @value or children qty-3: If a code for the unit is present, the system SHALL also be present
component:numericRangeMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume range measurements ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements ele-1: All FHIR elements must have a @value or children
value[x]	C	1..1	RangeIPS	Set of values bounded by low and high ele-1: All FHIR elements must have a @value or children rng-2: If present, low SHALL have a lower value than high
component:numericRatioMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume ratio measurements ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements ele-1: All FHIR elements must have a @value or children
value[x]	C	1..1	RatioIPS	A ratio of two Quantity values - a numerator and a denominator ele-1: All FHIR elements must have a @value or children rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present
component:numericSampledDataMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume sampled data measurements ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements ele-1: All FHIR elements must have a @value or children
value[x]	Σ	1..1	SampledData	Actual component result ele-1: All FHIR elements must have a @value or children
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.status	required	Fixed Value: final http://hl7.org/fhir/ValueSet/observation-status|4.0.1 from the FHIR Standard
Observation.category	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.category:radiology	preferred	Pattern: imaging http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.code	extensible	ResultsRadiologyObservationUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-observations-uv-ips
Observation.component.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component:observationText.code	extensible	ResultsRadiologyTextualObservationsSnomedDicomLoincUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-txtobs-snomed-dicom-loinc-uv-ips
Observation.component:observationCode.code	extensible	ResultsRadiologyObservationUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-observations-uv-ips
Observation.component:numericQuantityMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericRangeMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericRatioMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericSampledDataMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
hasComponentifValueStringEmpty	error	Observation	component is required if valueString is empty : (component.exists() and valueString.empty()) or valueString.exists()
hasMemberOrComponent	error	Observation	component and hasMember are mutually exclusive : hasMember.empty() or component.empty()
ips-1	error	Observation.effective[x]	Datetime must be at least to day. : $this.ofType(dateTime).empty() or ($this as dateTime).toString().length() >= 8
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()
qty-3	error	Observation.component:numericQuantityMeasurement.value[x]	If a code for the unit is present, the system SHALL also be present : code.empty() or system.exists()
rat-1	error	Observation.component:numericRatioMeasurement.value[x]	Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present : (numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())
rng-2	error	Observation.component:numericRangeMeasurement.value[x]	If present, low SHALL have a lower value than high : low.empty() or high.empty() or (low <= high)

Snapshot View

Name	Flags	Card.	Type	Description & Constraints
Observation	C	0..*	ObservationResultsRadiologyUvIps	Measurements and simple assertions obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present hasMemberOrComponent: component and hasMember are mutually exclusive hasComponentifValueStringEmpty: component is required if valueString is empty
id	Σ	0..1	id	Logical id of this artifact
meta	Σ	0..1	Meta	Metadata about the resource
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred): A human language. Additional Bindings Purpose AllLanguages Max Binding
text		0..1	Narrative	Text summary of the resource, for human interpretation
contained		0..*	Resource	Contained, inline Resources
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
identifier	Σ	0..*	Identifier	Business Identifier for observation
basedOn	Σ	0..*	Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)	Fulfills plan, proposal or order
partOf	Σ	0..*	Reference(Imaging Study (IPS))	Part of referenced event
status	?!Σ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation. Fixed Value: final
Slices for category		1..*	CodeableConceptIPS	Concept - reference to a terminology or just text Slice: Unordered, Open by pattern:$this Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
category:radiology	S	1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: imaging
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
code	S	1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Observation - IPS (extensible)
subject	SΣ	1..1	Reference(Patient (IPS))	Who and/or what the observation is about
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
reference	SΣC	1..1	string	Literal reference, Relative, internal or absolute URL
type	Σ	0..1	uri	Type the reference refers to (e.g. "Patient") Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).
identifier	Σ	0..1	Identifier	Logical reference, when literal reference is not known
display	Σ	0..1	string	Text alternative for the resource
focus	Σ	0..*	Reference(Resource)	What the observation is about, when it is not about the subject of record
encounter	Σ	0..1	Reference(Encounter)	Healthcare event during which this observation is made
effective[x]	SΣC	1..1		Clinically relevant time/time-period for observation ips-1: Datetime must be at least to day.
effective[x]All Types				Content/Rules for all Types
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
data-absent-reason	S	0..1	code	effective[x] absence reason URL: http://hl7.org/fhir/StructureDefinition/data-absent-reason Binding: DataAbsentReason (required)
effectiveDateTime			dateTime
effectivePeriod			Period
issued	Σ	0..1	instant	Date/Time this version was made available
performer	SΣ	1..*	Reference(Practitioner (IPS) | PractitionerRole (IPS) | Organization (IPS) | CareTeam | Patient (IPS) | RelatedPerson)	Who is responsible for the observation
Slices for value[x]	SΣC	0..1		Actual result Slice: Unordered, Open by type:$this
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
value[x]:valueString	SΣC	0..1	string	Actual result
dataAbsentReason	C	0..1	CodeableConcept	Why the result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
note		0..*	Annotation	Comments about the observation
bodySite		0..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.
method		0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
specimen		0..1	Reference(Specimen)	Specimen used for this observation
device		0..1	Reference(Device - performer, observer)	(Measurement) Device
referenceRange	C	0..*	BackboneElement	Provides guide for interpretation obs-3: Must have at least a low or a high or text
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	C	0..1	SimpleQuantity	Low Range, if relevant
high	C	0..1	SimpleQuantity	High Range, if relevant
type		0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
appliesTo		0..*	CodeableConcept	Reference range population Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
age		0..1	Range	Applicable age range, if relevant
text		0..1	string	Text based reference range in an observation
hasMember	Σ	0..*	Reference(Observation Results: radiology (IPS) | Observation Results (IPS))	Related resource that belongs to the Observation group
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
reference	ΣC	0..1	string	Literal reference, Relative, internal or absolute URL
type	Σ	0..1	uri	Type the reference refers to (e.g. "Patient") Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).
identifier	Σ	0..1	Identifier	Logical reference, when literal reference is not known
display	Σ	0..1	string	Text alternative for the resource
derivedFrom	Σ	0..*	Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | Observation | MolecularSequence)	Related measurements the observation is made from
Slices for component	SΣ	0..*	BackboneElement	Component results Slice: Unordered, Closed by type:value
component:All Slices				Content/Rules for all slices
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
value[x]	Σ	0..1		Actual component result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:observationText	SΣ	0..*	BackboneElement	Observation Text
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Textual Observations (SNOMED-DICOM-LOINC) - IPS (extensible)
value[x]	Σ	1..1	string	Actual component result
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:observationCode	SΣ	0..*	BackboneElement	Observation Code
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Observation - IPS (extensible)
value[x]		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:numericQuantityMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume quantity measurements
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements
value[x]	C	1..1	QuantityIPS	A measured amount using UCUM qty-3: If a code for the unit is present, the system SHALL also be present
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:numericRangeMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume range measurements
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements
value[x]	C	1..1	RangeIPS	Set of values bounded by low and high rng-2: If present, low SHALL have a lower value than high
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:numericRatioMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume ratio measurements
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements
value[x]	C	1..1	RatioIPS	A ratio of two Quantity values - a numerator and a denominator rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:numericSampledDataMeasurement	SΣ	0..*	BackboneElement	Observation Measurement, including linear, area and volume sampled data measurements
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code		1..1	CodeableConceptIPS	Concept - reference to a terminology or just text Binding: Results Radiology Measurement Observation (SNOMED-DICOM) - IPS (extensible): Codes identifying numeric measurements
value[x]	Σ	1..1	SampledData	Actual component result
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.language	preferred	CommonLanguages http://hl7.org/fhir/ValueSet/languages from the FHIR Standard Additional Bindings Purpose AllLanguages Max Binding
Observation.status	required	Fixed Value: final http://hl7.org/fhir/ValueSet/observation-status|4.0.1 from the FHIR Standard
Observation.category	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.category:radiology	preferred	Pattern: imaging http://hl7.org/fhir/ValueSet/observation-category from the FHIR Standard
Observation.code	extensible	ResultsRadiologyObservationUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-observations-uv-ips
Observation.subject.type	extensible	ResourceType http://hl7.org/fhir/ValueSet/resource-types from the FHIR Standard
Observation.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.bodySite	example	SNOMEDCTBodyStructures http://hl7.org/fhir/ValueSet/body-site from the FHIR Standard
Observation.method	example	ObservationMethods http://hl7.org/fhir/ValueSet/observation-methods from the FHIR Standard
Observation.referenceRange.type	preferred	ObservationReferenceRangeMeaningCodes http://hl7.org/fhir/ValueSet/referencerange-meaning from the FHIR Standard
Observation.referenceRange.appliesTo	example	ObservationReferenceRangeAppliesToCodes http://hl7.org/fhir/ValueSet/referencerange-appliesto from the FHIR Standard
Observation.hasMember.type	extensible	ResourceType http://hl7.org/fhir/ValueSet/resource-types from the FHIR Standard
Observation.component.code	example	LOINCCodes (a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes from the FHIR Standard
Observation.component.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:observationText.code	extensible	ResultsRadiologyTextualObservationsSnomedDicomLoincUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-txtobs-snomed-dicom-loinc-uv-ips
Observation.component:observationText.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:observationText.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:observationCode.code	extensible	ResultsRadiologyObservationUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-observations-uv-ips
Observation.component:observationCode.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:observationCode.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:numericQuantityMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericQuantityMeasurement.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:numericQuantityMeasurement.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:numericRangeMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericRangeMeasurement.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:numericRangeMeasurement.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:numericRatioMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericRatioMeasurement.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:numericRatioMeasurement.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard
Observation.component:numericSampledDataMeasurement.code	extensible	ResultsRadiologyMeasurementObservationSnomedDicomUvIps http://hl7.org/fhir/uv/ips/ValueSet/results-radiology-numobs-snomed-dicom-uv-ips
Observation.component:numericSampledDataMeasurement.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason from the FHIR Standard
Observation.component:numericSampledDataMeasurement.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation from the FHIR Standard

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
hasComponentifValueStringEmpty	error	Observation	component is required if valueString is empty : (component.exists() and valueString.empty()) or valueString.exists()
hasMemberOrComponent	error	Observation	component and hasMember are mutually exclusive : hasMember.empty() or component.empty()
ips-1	error	Observation.effective[x]	Datetime must be at least to day. : $this.ofType(dateTime).empty() or ($this as dateTime).toString().length() >= 8
obs-3	error	Observation.referenceRange	Must have at least a low or a high or text : low.exists() or high.exists() or text.exists()
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()
qty-3	error	Observation.component:numericQuantityMeasurement.value[x]	If a code for the unit is present, the system SHALL also be present : code.empty() or system.exists()
rat-1	error	Observation.component:numericRatioMeasurement.value[x]	Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present : (numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())
rng-2	error	Observation.component:numericRangeMeasurement.value[x]	If present, low SHALL have a lower value than high : low.empty() or high.empty() or (low <= high)

This structure is derived from ObservationResultsRadiologyUvIps

Summary