EU Imaging Report R4
1.0.0-ballot - ci-build 150

EU Imaging Report R4, published by HL7 Europe. This guide is not an authorized publication; it is the continuous build for version 1.0.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/hl7-eu/imaging-r4/ and changes regularly. See the Directory of published versions

Resource Profile: ProcedureEuImaging: Obligations - Detailed Descriptions

Draft as of 2026-10-21

Definitions for the procedure-obligation-eu-imaging resource profile

See the documentation on how to interpret the contents of this table

0. Procedure
Definition

An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

ShortAn action that is being or was performed on a patient
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Procedure.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Procedure.extension:bodySite
Slice NamebodySite
Definition

The target body site used for this procedure. Multiple locations are allowed.

ShortThe target point for this procedure
Control0..1
TypeExtension(Procedure Target Body Structure) (Extension Type: Reference(BodyStructure))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Procedure.extension:bodySite.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Procedure.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. Procedure.extension:bodySite.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Value
    {
      "url" : "http://hl7.org/fhir/StructureDefinition/procedure-targetBodyStructure"
    }
    <url value="http://hl7.org/fhir/StructureDefinition/procedure-targetBodyStructure"/>
    10. Procedure.extension:bodySite.value[x]
    Definition

    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortValue of extension
    Control10..1
    This element is affected by the following invariants: ext-1
    TypeReference(BodyStructure (EU core)), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Procedure.extension:recorded
    Slice Namerecorded
    Definition

    The date the occurrence of the procedure was first captured in the record regardless of Procedure.status (potentially after the occurrence of the event).

    ShortDate when the procedure was recorded
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: When the procedure was first captured in the subject's record (new)) (Extension Type: dateTime)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Procedure.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Procedure.status
    Definition

    A code specifying the state of the procedure. Generally, this will be the in-progress or completed state.

    Shortpreparation | in-progress | not-done | on-hold | stopped | completed | entered-in-error | unknown
    Comments

    The "unknown" code is not to be used to convey other statuses. The "unknown" code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the procedure.

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from EventStatushttp://hl7.org/fhir/ValueSet/event-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/event-status|4.0.1)

    A code specifying the state of the procedure.

    Typecode
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Procedure.code
    Definition

    Identification of the procedure or recording of "absence of relevant procedures" or of "procedures unknown".


    The specific procedure that is performed. Use text if the exact nature of the procedure cannot be coded (e.g. "Laparoscopic Appendectomy").

    ShortIdentification of the procedure
    Control10..1
    BindingUnless not suitable, these codes SHALL be taken from For example codes, see ValueSet: Imaging Procedure Typehttp://hl7.org/fhir/ValueSet/procedure-code|4.0.1
    (extensible to http://hl7.eu/fhir/imaging/ValueSet/im-procedure-type)
    TypeCodeableConcept
    Is Modifierfalse
    Obligations
      ObligationsActorDocumentation
      SHOULD:able-to-populateImaging Report Producer

      EHDSImagingReport.header.eventType

      Summarytrue
      Requirements

      EHDSImagingReport.header.eventType


      0..1 to account for primarily narrative only resources.

      Alternate Namestype
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Procedure.subject
      Definition

      The person, animal or group on which the procedure was performed.

      ShortWho the procedure was performed on
      Control1..1
      TypeReference(Patient (EU core), Patient, Group)
      Is Modifierfalse
      Summarytrue
      Alternate Namespatient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Procedure.performed[x]
      Definition

      Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

      ShortWhen the procedure was performed
      Comments

      Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

      Control10..1
      TypeChoice of: dateTime, Period, string, Age, Range
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Procedure.performer
      Definition

      Limited to "real" people rather than equipment.

      ShortThe people who performed the procedure
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Procedure.performer. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ function
      • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

        26. Procedure.performer.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        28. Procedure.performer.function
        Definition

        Distinguishes the type of involvement of the performer in the procedure. For example, surgeon, anaesthetist, endoscopist.

        ShortType of performance
        Control10..1
        BindingFor example codes, see ProcedurePerformerRoleCodeshttp://hl7.org/fhir/ValueSet/performer-role|4.0.1
        (example to http://hl7.org/fhir/ValueSet/performer-role|4.0.1)

        A code that identifies the role of a performer of the procedure.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows disambiguation of the types of involvement of different performers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Procedure.performer.actor
        Definition

        The practitioner who was involved in the procedure.

        ShortThe reference to the practitioner
        Control1..1
        TypeReference(PractitionerRole (EU core), Practitioner (EU core), Device, Patient (EU core), RelatedPerson, Organization (EU core), Practitioner, PractitionerRole, Organization, Patient, RelatedPerson, Device)
        Is Modifierfalse
        Summarytrue
        Requirements

        A reference to Device supports use cases, such as pacemakers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Procedure.performer:performer
        Slice Nameperformer
        Definition

        Limited to "real" people rather than equipment.

        ShortThe people who performed the procedure
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Procedure.performer:performer.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        36. Procedure.performer:performer.function
        Definition

        Distinguishes the type of involvement of the performer in the procedure. For example, surgeon, anaesthetist, endoscopist.

        ShortType of performance
        Control0..1
        BindingFor example codes, see ProcedurePerformerRoleCodeshttp://hl7.org/fhir/ValueSet/performer-role|4.0.1
        (example to http://hl7.org/fhir/ValueSet/performer-role|4.0.1)

        A code that identifies the role of a performer of the procedure.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows disambiguation of the types of involvement of different performers.

        Pattern Value
        {
          "coding" : [
            {
              "system" : "http://snomed.info/sct",
              "code" : "223366009"
            }
          ]
        }
        <function>
          <coding>
            <system value="http://snomed.info/sct"/>
            <code value="223366009"/>
          </coding>
        </function>
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. Procedure.performer:performer.actor
        Definition

        The practitioner who was involved in the procedure.

        ShortThe reference to the practitioner
        Control1..1
        TypeReference(PractitionerRole (EU core), Practitioner, PractitionerRole, Organization, Patient, RelatedPerson, Device)
        Is Modifierfalse
        Summarytrue
        Requirements

        A reference to Device supports use cases, such as pacemakers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Procedure.performer:imaging-device
        Slice Nameimaging-device
        Definition

        Limited to "real" people rather than equipment.

        ShortThe people who performed the procedure
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Procedure.performer:imaging-device.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        44. Procedure.performer:imaging-device.function
        Definition

        Distinguishes the type of involvement of the performer in the procedure. For example, surgeon, anaesthetist, endoscopist.

        ShortType of performance
        Control0..1
        BindingFor example codes, see ProcedurePerformerRoleCodeshttp://hl7.org/fhir/ValueSet/performer-role|4.0.1
        (example to http://hl7.org/fhir/ValueSet/performer-role|4.0.1)

        A code that identifies the role of a performer of the procedure.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows disambiguation of the types of involvement of different performers.

        Pattern Value
        {
          "coding" : [
            {
              "system" : "http://snomed.info/sct",
              "code" : "314789007"
            }
          ]
        }
        <function>
          <coding>
            <system value="http://snomed.info/sct"/>
            <code value="314789007"/>
          </coding>
        </function>
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Procedure.performer:imaging-device.actor
        Definition

        The practitioner who was involved in the procedure.

        ShortThe reference to the practitioner
        Control1..1
        TypeReference(Device: Imaging Device, Practitioner, PractitionerRole, Organization, Patient, RelatedPerson, Device)
        Is Modifierfalse
        Summarytrue
        Requirements

        A reference to Device supports use cases, such as pacemakers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        See the documentation on how to interpret the contents of this table

        0. Procedure
        2. Procedure.code
        Obligations
          ObligationsActorDocumentation
          SHOULD:able-to-populateImaging Report Producer

          EHDSImagingReport.header.eventType

          Requirements

          EHDSImagingReport.header.eventType

          See the documentation on how to interpret the contents of this table

          0. Procedure
          Definition

          An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

          ShortAn action that is being or was performed on a patient
          Control0..*
          Is Modifierfalse
          Summaryfalse
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          2. Procedure.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Is Modifierfalse
          Summarytrue
          4. Procedure.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. Procedure.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. Procedure.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHOULD be taken from CommonLanguages
          (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

          A human language.

          Additional BindingsPurpose
          AllLanguagesMax Binding
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. Procedure.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortTextual representation of the procedur
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          TypeNarrative
          Is Modifierfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. Procedure.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

          Control0..*
          TypeResource
          Is Modifierfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. Procedure.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Procedure.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. Procedure.extension:bodySite
            Slice NamebodySite
            Definition

            The target body site used for this procedure. Multiple locations are allowed.

            ShortThe target point for this procedure
            Control0..1
            TypeExtension(Procedure Target Body Structure) (Extension Type: Reference(BodyStructure))
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. Procedure.extension:bodySite.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            This element is affected by the following invariants: ele-1
            Typeid
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            20. Procedure.extension:bodySite.extension
            Definition

            An Extension

            ShortExtension
            Control0..0
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Procedure.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 22. Procedure.extension:bodySite.url
              Definition

              Source of the definition for the extension code - a logical name or a URL.

              Shortidentifies the meaning of the extension
              Comments

              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

              Control1..1
              Typeuri
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              Fixed Value
              {
                "url" : "http://hl7.org/fhir/StructureDefinition/procedure-targetBodyStructure"
              }
              <url value="http://hl7.org/fhir/StructureDefinition/procedure-targetBodyStructure"/>
              24. Procedure.extension:bodySite.value[x]
              Definition

              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

              ShortValue of extension
              Control1..1
              This element is affected by the following invariants: ext-1
              TypeReference(BodyStructure (EU core))
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              26. Procedure.extension:recorded
              Slice Namerecorded
              Definition

              The date the occurrence of the procedure was first captured in the record regardless of Procedure.status (potentially after the occurrence of the event).

              ShortDate when the procedure was recorded
              Control0..1
              This element is affected by the following invariants: ele-1
              TypeExtension(R5: When the procedure was first captured in the subject's record (new)) (Extension Type: dateTime)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              28. Procedure.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
              Summaryfalse
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              30. Procedure.identifier
              Definition

              Business identifiers assigned to this procedure by the performer or other systems which remain constant as the resource is updated and is propagated from server to server.

              ShortIdentifier for the procedure
              Comments

              This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and Person resource instances might share the same social insurance number.

              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows identification of the procedure as it is known by various participating systems and in a way that remains consistent across servers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              32. Procedure.instantiatesCanonical
              Definition

              The URL pointing to a FHIR-defined protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

              ShortInstantiates FHIR protocol or definition
              Control0..*
              Typecanonical(PlanDefinition, ActivityDefinition, Measure, OperationDefinition, Questionnaire)
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. Procedure.instantiatesUri
              Definition

              The URL pointing to an externally maintained protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

              ShortInstantiates external protocol or definition
              Comments

              This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier.

              Control0..*
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              36. Procedure.basedOn
              Definition

              A reference to a resource that contains details of the request for this procedure.

              ShortA request for this procedure
              Control0..*
              TypeReference(CarePlan, ServiceRequest)
              Is Modifierfalse
              Summarytrue
              Alternate Namesfulfills
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              38. Procedure.partOf
              Definition

              A larger event of which this particular procedure is a component or step.

              ShortPart of referenced event
              Comments

              The MedicationAdministration resource has a partOf reference to Procedure, but this is not a circular reference. For example, the anesthesia MedicationAdministration is part of the surgical Procedure (MedicationAdministration.partOf = Procedure). For example, the procedure to insert the IV port for an IV medication administration is part of the medication administration (Procedure.partOf = MedicationAdministration).

              Control0..*
              TypeReference(Procedure, Observation, MedicationAdministration)
              Is Modifierfalse
              Summarytrue
              Alternate Namescontainer
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              40. Procedure.status
              Definition

              A code specifying the state of the procedure. Generally, this will be the in-progress or completed state.

              Shortpreparation | in-progress | not-done | on-hold | stopped | completed | entered-in-error | unknown
              Comments

              The "unknown" code is not to be used to convey other statuses. The "unknown" code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the procedure.

              This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

              Control1..1
              BindingThe codes SHALL be taken from EventStatus
              (required to http://hl7.org/fhir/ValueSet/event-status|4.0.1)

              A code specifying the state of the procedure.

              Typecode
              Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              42. Procedure.statusReason
              Definition

              Captures the reason for the current state of the procedure.

              ShortReason for current status
              Comments

              This is generally only used for "exception" statuses such as "not-done", "suspended" or "aborted". The reason for performing the event at all is captured in reasonCode, not here.

              Control0..1
              BindingFor example codes, see ProcedureNotPerformedReason(SNOMED-CT)
              (example to http://hl7.org/fhir/ValueSet/procedure-not-performed-reason|4.0.1)

              A code that identifies the reason a procedure was not performed.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Alternate NamesSuspended Reason, Cancelled Reason
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. Procedure.category
              Definition

              A code that classifies the procedure for searching, sorting and display purposes (e.g. "Surgical Procedure").

              ShortClassification of the procedure
              Control0..1
              BindingFor example codes, see ProcedureCategoryCodes(SNOMEDCT)
              (example to http://hl7.org/fhir/ValueSet/procedure-category|4.0.1)

              A code that classifies a procedure for searching, sorting and display purposes.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. Procedure.code
              Definition

              Identification of the procedure or recording of "absence of relevant procedures" or of "procedures unknown".

              ShortIdentification of the procedure
              Control1..1
              BindingUnless not suitable, these codes SHALL be taken from ValueSet: Imaging Procedure Type
              (extensible to http://hl7.eu/fhir/imaging/ValueSet/im-procedure-type)
              TypeCodeableConcept
              Is Modifierfalse
              Obligations
                ObligationsActorDocumentation
                SHOULD:able-to-populateImaging Report Producer

                EHDSImagingReport.header.eventType

                Summarytrue
                Requirements

                EHDSImagingReport.header.eventType

                Alternate Namestype
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                48. Procedure.subject
                Definition

                The person, animal or group on which the procedure was performed.

                ShortWho the procedure was performed on
                Control1..1
                TypeReference(Patient (EU core))
                Is Modifierfalse
                Summarytrue
                Alternate Namespatient
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                50. Procedure.encounter
                Definition

                The Encounter during which this Procedure was created or performed or to which the creation of this record is tightly associated.

                ShortEncounter created as part of
                Comments

                This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

                Control0..1
                TypeReference(Encounter)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                52. Procedure.performed[x]
                Definition

                Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

                ShortWhen the procedure was performed
                Comments

                Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

                Control1..1
                TypeChoice of: dateTime, Period, string, Age, Range
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                54. Procedure.recorder
                Definition

                Individual who recorded the record and takes responsibility for its content.

                ShortWho recorded the procedure
                Control0..1
                TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                56. Procedure.asserter
                Definition

                Individual who is making the procedure statement.

                ShortPerson who asserts this procedure
                Control0..1
                TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                58. Procedure.performer
                Definition

                Limited to "real" people rather than equipment.

                ShortThe people who performed the procedure
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Procedure.performer. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ function
                • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

                  60. Procedure.performer.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  62. Procedure.performer.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  64. Procedure.performer.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  66. Procedure.performer.function
                  Definition

                  Distinguishes the type of involvement of the performer in the procedure. For example, surgeon, anaesthetist, endoscopist.

                  ShortType of performance
                  Control1..1
                  BindingFor example codes, see ProcedurePerformerRoleCodes
                  (example to http://hl7.org/fhir/ValueSet/performer-role|4.0.1)

                  A code that identifies the role of a performer of the procedure.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Allows disambiguation of the types of involvement of different performers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  68. Procedure.performer.actor
                  Definition

                  The practitioner who was involved in the procedure.

                  ShortThe reference to the practitioner
                  Control1..1
                  TypeReference(PractitionerRole (EU core), Practitioner (EU core), Device, Patient (EU core), RelatedPerson, Organization (EU core))
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  A reference to Device supports use cases, such as pacemakers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  70. Procedure.performer.onBehalfOf
                  Definition

                  The organization the device or practitioner was acting on behalf of.

                  ShortOrganization the device or practitioner was acting for
                  Control0..1
                  TypeReference(Organization (EU core))
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Practitioners and Devices can be associated with multiple organizations. This element indicates which organization they were acting on behalf of when performing the action.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  72. Procedure.performer:performer
                  Slice Nameperformer
                  Definition

                  Limited to "real" people rather than equipment.

                  ShortThe people who performed the procedure
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  74. Procedure.performer:performer.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  76. Procedure.performer:performer.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  78. Procedure.performer:performer.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  80. Procedure.performer:performer.function
                  Definition

                  Distinguishes the type of involvement of the performer in the procedure. For example, surgeon, anaesthetist, endoscopist.

                  ShortType of performance
                  Control0..1
                  BindingFor example codes, see ProcedurePerformerRoleCodes
                  (example to http://hl7.org/fhir/ValueSet/performer-role|4.0.1)

                  A code that identifies the role of a performer of the procedure.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Allows disambiguation of the types of involvement of different performers.

                  Pattern Value
                  {
                    "coding" : [
                      {
                        "system" : "http://snomed.info/sct",
                        "code" : "223366009"
                      }
                    ]
                  }
                  <function>
                    <coding>
                      <system value="http://snomed.info/sct"/>
                      <code value="223366009"/>
                    </coding>
                  </function>
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  82. Procedure.performer:performer.actor
                  Definition

                  The practitioner who was involved in the procedure.

                  ShortThe reference to the practitioner
                  Control1..1
                  TypeReference(PractitionerRole (EU core))
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  A reference to Device supports use cases, such as pacemakers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  84. Procedure.performer:performer.onBehalfOf
                  Definition

                  The organization the device or practitioner was acting on behalf of.

                  ShortOrganization the device or practitioner was acting for
                  Control0..1
                  TypeReference(Organization (EU core))
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Practitioners and Devices can be associated with multiple organizations. This element indicates which organization they were acting on behalf of when performing the action.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  86. Procedure.performer:imaging-device
                  Slice Nameimaging-device
                  Definition

                  Limited to "real" people rather than equipment.

                  ShortThe people who performed the procedure
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  88. Procedure.performer:imaging-device.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  90. Procedure.performer:imaging-device.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  92. Procedure.performer:imaging-device.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  94. Procedure.performer:imaging-device.function
                  Definition

                  Distinguishes the type of involvement of the performer in the procedure. For example, surgeon, anaesthetist, endoscopist.

                  ShortType of performance
                  Control0..1
                  BindingFor example codes, see ProcedurePerformerRoleCodes
                  (example to http://hl7.org/fhir/ValueSet/performer-role|4.0.1)

                  A code that identifies the role of a performer of the procedure.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Allows disambiguation of the types of involvement of different performers.

                  Pattern Value
                  {
                    "coding" : [
                      {
                        "system" : "http://snomed.info/sct",
                        "code" : "314789007"
                      }
                    ]
                  }
                  <function>
                    <coding>
                      <system value="http://snomed.info/sct"/>
                      <code value="314789007"/>
                    </coding>
                  </function>
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  96. Procedure.performer:imaging-device.actor
                  Definition

                  The practitioner who was involved in the procedure.

                  ShortThe reference to the practitioner
                  Control1..1
                  TypeReference(Device: Imaging Device)
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  A reference to Device supports use cases, such as pacemakers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  98. Procedure.performer:imaging-device.onBehalfOf
                  Definition

                  The organization the device or practitioner was acting on behalf of.

                  ShortOrganization the device or practitioner was acting for
                  Control0..1
                  TypeReference(Organization (EU core))
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Practitioners and Devices can be associated with multiple organizations. This element indicates which organization they were acting on behalf of when performing the action.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  100. Procedure.location
                  Definition

                  The location where the procedure actually happened. E.g. a newborn at home, a tracheostomy at a restaurant.

                  ShortWhere the procedure happened
                  Control0..1
                  TypeReference(Location)
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Ties a procedure to where the records are likely kept.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  102. Procedure.reasonCode
                  Definition

                  The coded reason why the procedure was performed. This may be a coded entity of some type, or may simply be present as text.

                  ShortWhy the procedure was performed (code)
                  Comments

                  Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

                  Control0..*
                  BindingFor example codes, see ProcedureReasonCodes
                  (example to http://hl7.org/fhir/ValueSet/procedure-reason|4.0.1)

                  A code that identifies the reason a procedure is required.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  104. Procedure.reasonReference
                  Definition

                  The justification of why the procedure was performed.

                  ShortWhy the procedure was performed (details)
                  Comments

                  It is possible for a procedure to be a reason (such as C-Section) for another procedure (such as an epidural). Other examples include endoscopy for dilatation and biopsy (a combination of diagnostic and therapeutic use). Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

                  Control0..*
                  TypeReference(Condition (EU core), Observation, Procedure (EU core), DiagnosticReport, DocumentReference)
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  106. Procedure.bodySite
                  Definition

                  Anatomical location which is the focus of the problem.

                  ShortTarget body sites
                  Comments

                  If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension procedure-targetbodystructure.

                  Control0..*
                  BindingThe codes SHOULD be taken from SNOMEDCTBodyStructures
                  (preferred to http://hl7.org/fhir/ValueSet/body-site)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  108. Procedure.bodySite.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  110. Procedure.bodySite.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Procedure.bodySite.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 112. Procedure.bodySite.extension:bodySite
                    Slice NamebodySite
                    Definition

                    Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

                    ShortTarget anatomic location or structure
                    Control0..1
                    TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    114. Procedure.bodySite.extension:bodySite.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typeid
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    116. Procedure.bodySite.extension:bodySite.extension
                    Definition

                    An Extension

                    ShortExtension
                    Control0..0
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Procedure.bodySite.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 118. Procedure.bodySite.extension:bodySite.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      Fixed Value
                      {
                        "url" : "http://hl7.org/fhir/StructureDefinition/bodySite"
                      }
                      <url value="http://hl7.org/fhir/StructureDefinition/bodySite"/>
                      120. Procedure.bodySite.extension:bodySite.value[x]
                      Definition

                      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                      ShortValue of extension
                      Control1..1
                      This element is affected by the following invariants: ext-1
                      TypeReference(BodyStructure (EU core))
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      122. Procedure.bodySite.coding
                      Definition

                      A reference to a code defined by a terminology system.

                      ShortCode defined by a terminology system
                      Comments

                      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                      Control0..*
                      TypeCoding
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Allows for alternative encodings within a code system, and translations to other code systems.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      124. Procedure.bodySite.text
                      Definition

                      A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                      ShortPlain text representation of the concept
                      Comments

                      Very often the text is the same as a displayName of one of the codings.

                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      126. Procedure.outcome
                      Definition

                      The outcome of the procedure - did it resolve the reasons for the procedure being performed?

                      ShortOutcome of the procedure
                      Comments

                      If outcome contains narrative text only, it can be captured using the CodeableConcept.text.

                      Control0..1
                      BindingFor example codes, see ProcedureOutcomeCodes(SNOMEDCT)
                      (example to http://hl7.org/fhir/ValueSet/procedure-outcome|4.0.1)

                      An outcome of a procedure - whether it was resolved or otherwise.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      128. Procedure.report
                      Definition

                      This could be a histology result, pathology report, surgical report, etc.

                      ShortAny report resulting from the procedure
                      Comments

                      There could potentially be multiple reports - e.g. if this was a procedure which took multiple biopsies resulting in a number of anatomical pathology reports.

                      Control0..*
                      TypeReference(DiagnosticReport, DocumentReference, Composition)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      130. Procedure.complication
                      Definition

                      Any complications that occurred during the procedure, or in the immediate post-performance period. These are generally tracked separately from the notes, which will typically describe the procedure itself rather than any 'post procedure' issues.

                      ShortComplications that occurred during the procedure (code)
                      Comments

                      If complications are only expressed by the narrative text, they can be captured using the CodeableConcept.text.

                      Control0..*
                      BindingFor example codes, see Condition/Problem/DiagnosisCodes
                      (example to http://hl7.org/fhir/ValueSet/condition-code|4.0.1)

                      Codes describing complications that resulted from a procedure.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      132. Procedure.complicationDetail
                      Definition

                      Any complications that occurred during the procedure, or in the immediate post-performance period.

                      ShortComplications that occurred during the procedure (details)
                      Control0..*
                      TypeReference(Condition (EU core))
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      This is used to document a condition that is a result of the procedure, not the condition that was the reason for the procedure.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      134. Procedure.followUp
                      Definition

                      If the procedure required specific follow up - e.g. removal of sutures. The follow up may be represented as a simple note or could potentially be more complex, in which case the CarePlan resource can be used.

                      ShortInstructions for follow up
                      Control0..*
                      BindingFor example codes, see ProcedureFollowUpCodes(SNOMEDCT)
                      (example to http://hl7.org/fhir/ValueSet/procedure-followup|4.0.1)

                      Specific follow up required for a procedure e.g. removal of sutures.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      136. Procedure.note
                      Definition

                      Any other notes and comments about the procedure.

                      ShortAdditional information about the procedure.
                      Control0..*
                      TypeAnnotation
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      138. Procedure.focalDevice
                      Definition

                      A device that is implanted, removed or otherwise manipulated (calibration, battery replacement, fitting a prosthesis, attaching a wound-vac, etc.) as a focal portion of the Procedure.

                      ShortDevice implanted, removed or otherwise manipulated
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      140. Procedure.focalDevice.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      142. Procedure.focalDevice.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      144. Procedure.focalDevice.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      146. Procedure.focalDevice.action
                      Definition

                      The kind of change that happened to the device during the procedure.

                      ShortKind of change to device
                      Control0..1
                      BindingThe codes SHOULD be taken from ProcedureDeviceActionCodes
                      (preferred to http://hl7.org/fhir/ValueSet/device-action|4.0.1)

                      A kind of change that happened to the device during the procedure.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      148. Procedure.focalDevice.manipulated
                      Definition

                      The device that was manipulated (changed) during the procedure.

                      ShortDevice that was changed
                      Control1..1
                      TypeReference(Device)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      150. Procedure.usedReference
                      Definition

                      Identifies medications, devices and any other substance used as part of the procedure.

                      ShortItems used during procedure
                      Comments

                      For devices actually implanted or removed, use Procedure.device.

                      Control0..*
                      TypeReference(Device, Medication (EU core), Substance)
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Used for tracking contamination, etc.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      152. Procedure.usedCode
                      Definition

                      Identifies coded items that were used as part of the procedure.

                      ShortDevice used to perform the procedure (code)
                      Comments

                      For devices actually implanted or removed, use Procedure.device.

                      Control0..*
                      BindingFor example codes, see FHIRDeviceTypes
                      (example to http://hl7.org/fhir/ValueSet/device-kind|4.0.1)

                      Codes describing items used during a procedure.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))