Núcleo de Interoperabilidad de Datos (NID) - MINSAL
0.4.0 - draft Chile flag

Núcleo de Interoperabilidad de Datos (NID) - MINSAL, published by Unidad de Interoperabilidad - MINSAL. This guide is not an authorized publication; it is the continuous build for version 0.4.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/Minsal-CL/NID/ and changes regularly. See the Directory of published versions

Resource Profile: ParametrosSalidaPixmMpi - Detailed Descriptions

Draft as of 2024-10-08

Definitions for the ParametrosSalidaPixmMpi resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Parameters
2. Parameters.parameter:targetId
Slice NametargetId
ShortUrl del recurso paciente
Must Supporttrue
4. Parameters.parameter:targetId.name
ShortNombre para la definición
Must Supporttrue
6. Parameters.parameter:targetId.value[x]
ShortReferencia del recurso paciente encontrado
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
8. Parameters.parameter:targetIdentifier
Slice NametargetIdentifier
ShortIdentificador encontrados.
Must Supporttrue
10. Parameters.parameter:targetIdentifier.name
ShortNombre para la definición
Must Supporttrue
12. Parameters.parameter:targetIdentifier.value[x]
ShortIdentificador del paciente encontrado
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
14. Parameters.parameter:targetIdentifier.value[x].system
ShortSistema de identificador
Must Supporttrue
16. Parameters.parameter:targetIdentifier.value[x].value
ShortValor del identificador
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here

0. Parameters
Definition

This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

ShortOperation Request or Response
Comments

The parameters that may be used are defined by the OperationDefinition resource.

Control0..*
Is Modifierfalse
Summaryfalse
2. Parameters.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Parameters.parameter
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control0..*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
SlicingThis element introduces a set of slices on Parameters.parameter. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ name
  • 6. Parameters.parameter.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Parameters.parameter.name
    Definition

    The name of the parameter (reference to the operation definition).

    ShortName from the definition
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Parameters.parameter:targetId
    Slice NametargetId
    Definition

    A parameter passed to or received from the operation.

    ShortUrl del recurso pacienteOperation Parameter
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
    inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
    12. Parameters.parameter:targetId.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Parameters.parameter:targetId.name
    Definition

    The name of the parameter (reference to the operation definition).

    ShortNombre para la definiciónName from the definition
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Fixed ValuetargetId
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Parameters.parameter:targetId.value[x]
    Definition

    If the parameter is a data type.

    ShortReferencia del recurso paciente encontradoIf parameter is a data type
    Control10..1
    This element is affected by the following invariants: inv-1
    TypeReference(Patient)referenced, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Parameters.parameter:targetId.value[x].reference
    Definition

    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    ShortLiteral reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control10..1
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Parameters.parameter:targetIdentifier
    Slice NametargetIdentifier
    Definition

    A parameter passed to or received from the operation.

    ShortIdentificador encontrados.Operation Parameter
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
    inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
    22. Parameters.parameter:targetIdentifier.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    24. Parameters.parameter:targetIdentifier.name
    Definition

    The name of the parameter (reference to the operation definition).

    ShortNombre para la definiciónName from the definition
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Fixed ValuetargetIdentifier
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Parameters.parameter:targetIdentifier.value[x]
    Definition

    If the parameter is a data type.

    ShortIdentificador del paciente encontradoIf parameter is a data type
    Control10..1
    This element is affected by the following invariants: inv-1
    TypeIdentifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Parameters.parameter:targetIdentifier.value[x].use
    Definition

    The purpose of this identifier.

    Shortusual | official | temp | secondary | old (If known)
    Comments

    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..1
    BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

    Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. Parameters.parameter:targetIdentifier.value[x].system
    Definition

    Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

    ShortSistema de identificadorThe namespace for the identifier value
    Comments

    Both the value and system shall be populated. (IHE ITI TF-2 Z.9.1 Identifier Type)


    Identifier.system is always case sensitive.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

    Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. Parameters.parameter:targetIdentifier.value[x].value
    Definition

    The portion of the identifier typically relevant to the user and which is unique within the context of the system.

    ShortValor del identificadorThe value that is unique
    Comments

    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Example<br/><b>General</b>:123456
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. Parameters
    Definition

    This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

    ShortOperation Request or Response
    Comments

    The parameters that may be used are defined by the OperationDefinition resource.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    2. Parameters.id
    Definition

    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

    ShortLogical id of this artifact
    Comments

    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

    Control0..1
    Typeid
    Is Modifierfalse
    Summarytrue
    4. Parameters.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    TypeMeta
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Parameters.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Parameters.language
    Definition

    The base language in which the resource is written.

    ShortLanguage of the resource content
    Comments

    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

    Control0..1
    BindingThe codes SHOULD be taken from CommonLanguages
    (preferred to http://hl7.org/fhir/ValueSet/languages)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Parameters.parameter
    Definition

    A parameter passed to or received from the operation.

    ShortOperation Parameter
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
    SlicingThis element introduces a set of slices on Parameters.parameter. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ name
    • 12. Parameters.parameter.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      14. Parameters.parameter.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. Parameters.parameter.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. Parameters.parameter.name
      Definition

      The name of the parameter (reference to the operation definition).

      ShortName from the definition
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Parameters.parameter.value[x]
      Definition

      If the parameter is a data type.

      ShortIf parameter is a data type
      Control0..1
      This element is affected by the following invariants: inv-1
      TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Parameters.parameter.resource
      Definition

      If the parameter is a whole resource.

      ShortIf parameter is a whole resource
      Comments

      When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

      Control0..1
      This element is affected by the following invariants: inv-1
      TypeResource
      Is Modifierfalse
      Summarytrue
      24. Parameters.parameter.part
      Definition

      A named part of a multi-part parameter.

      ShortNamed part of a multi-part parameter
      Comments

      Only one level of nested parameters is allowed.

      Control0..*
      TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Parameters.parameter:targetId
      Slice NametargetId
      Definition

      A parameter passed to or received from the operation.

      ShortUrl del recurso paciente
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
      28. Parameters.parameter:targetId.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      30. Parameters.parameter:targetId.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      32. Parameters.parameter:targetId.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      34. Parameters.parameter:targetId.name
      Definition

      The name of the parameter (reference to the operation definition).

      ShortNombre para la definición
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Fixed ValuetargetId
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. Parameters.parameter:targetId.value[x]
      Definition

      If the parameter is a data type.

      ShortReferencia del recurso paciente encontrado
      Control1..1
      This element is affected by the following invariants: inv-1
      TypeReference(Patient)referenced
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. Parameters.parameter:targetId.value[x].id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      40. Parameters.parameter:targetId.value[x].extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Parameters.parameter.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 42. Parameters.parameter:targetId.value[x].reference
        Definition

        A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

        ShortLiteral reference, Relative, internal or absolute URL
        Comments

        Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

        Control1..1
        This element is affected by the following invariants: ref-1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Parameters.parameter:targetId.value[x].type
        Definition

        The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

        The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

        ShortType the reference refers to (e.g. "Patient")
        Comments

        This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from ResourceType
        (extensible to http://hl7.org/fhir/ValueSet/resource-types)

        Aa resource (or, for logical models, the URI of the logical model).

        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Parameters.parameter:targetId.value[x].identifier
        Definition

        An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

        ShortLogical reference, when literal reference is not known
        Comments

        When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

        When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

        Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

        Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..1
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Parameters.parameter:targetId.value[x].display
        Definition

        Plain text narrative that identifies the resource in addition to the resource reference.

        ShortText alternative for the resource
        Comments

        This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. Parameters.parameter:targetId.resource
        Definition

        If the parameter is a whole resource.

        ShortIf parameter is a whole resource
        Comments

        When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

        Control0..1
        This element is affected by the following invariants: inv-1
        TypeResource
        Is Modifierfalse
        Summarytrue
        52. Parameters.parameter:targetId.part
        Definition

        A named part of a multi-part parameter.

        ShortNamed part of a multi-part parameter
        Comments

        Only one level of nested parameters is allowed.

        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. Parameters.parameter:targetIdentifier
        Slice NametargetIdentifier
        Definition

        A parameter passed to or received from the operation.

        ShortIdentificador encontrados.
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
        56. Parameters.parameter:targetIdentifier.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        58. Parameters.parameter:targetIdentifier.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        60. Parameters.parameter:targetIdentifier.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        62. Parameters.parameter:targetIdentifier.name
        Definition

        The name of the parameter (reference to the operation definition).

        ShortNombre para la definición
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Fixed ValuetargetIdentifier
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        64. Parameters.parameter:targetIdentifier.value[x]
        Definition

        If the parameter is a data type.

        ShortIdentificador del paciente encontrado
        Control1..1
        This element is affected by the following invariants: inv-1
        TypeIdentifier
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        66. Parameters.parameter:targetIdentifier.value[x].id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        68. Parameters.parameter:targetIdentifier.value[x].extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Parameters.parameter.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 70. Parameters.parameter:targetIdentifier.value[x].use
          Definition

          The purpose of this identifier.

          Shortusual | official | temp | secondary | old (If known)
          Comments

          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

          Control0..1
          BindingThe codes SHALL be taken from IdentifierUse
          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

          Identifies the purpose for this identifier, if known .

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. Parameters.parameter:targetIdentifier.value[x].type
          Definition

          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

          ShortDescription of identifier
          Comments

          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows users to make use of identifiers when the identifier system is not known.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          74. Parameters.parameter:targetIdentifier.value[x].system
          Definition

          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

          ShortSistema de identificador
          Comments

          Both the value and system shall be populated. (IHE ITI TF-2 Z.9.1 Identifier Type)

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          76. Parameters.parameter:targetIdentifier.value[x].value
          Definition

          The portion of the identifier typically relevant to the user and which is unique within the context of the system.

          ShortValor del identificador
          Comments

          If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Example<br/><b>General</b>:123456
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          78. Parameters.parameter:targetIdentifier.value[x].period
          Definition

          Time period during which identifier is/was valid for use.

          ShortTime period when id is/was valid for use
          Control0..1
          TypePeriod
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          80. Parameters.parameter:targetIdentifier.value[x].assigner
          Definition

          Organization that issued/manages the identifier.

          ShortWhen the assigning authority name is provided, the actor shall also populate the assigner.
          Comments

          The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

          Control0..1
          TypeReference(Organization)
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          82. Parameters.parameter:targetIdentifier.value[x].assigner.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          84. Parameters.parameter:targetIdentifier.value[x].assigner.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Parameters.parameter.value[x].assigner.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 86. Parameters.parameter:targetIdentifier.value[x].assigner.reference
            Definition

            A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

            ShortLiteral reference, Relative, internal or absolute URL
            Comments

            Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

            Control0..1
            This element is affected by the following invariants: ref-1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            88. Parameters.parameter:targetIdentifier.value[x].assigner.type
            Definition

            The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

            The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

            ShortType the reference refers to (e.g. "Patient")
            Comments

            This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from ResourceType
            (extensible to http://hl7.org/fhir/ValueSet/resource-types)

            Aa resource (or, for logical models, the URI of the logical model).

            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            90. Parameters.parameter:targetIdentifier.value[x].assigner.identifier
            Definition

            An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

            ShortLogical reference, when literal reference is not known
            Comments

            When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

            When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

            Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

            Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..1
            TypeIdentifier
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            92. Parameters.parameter:targetIdentifier.value[x].assigner.display
            Definition

            Plain text narrative that identifies the resource in addition to the resource reference.

            ShortWhen the assigning authority name is provided, the actor shall also populate the display attribute.
            Comments

            When the assigning authority name is provided, the actor shall also populate the display attribute. (IHE ITI TF-2 E3 FHIR Identifier Type)

            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            94. Parameters.parameter:targetIdentifier.resource
            Definition

            If the parameter is a whole resource.

            ShortIf parameter is a whole resource
            Comments

            When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

            Control0..1
            This element is affected by the following invariants: inv-1
            TypeResource
            Is Modifierfalse
            Summarytrue
            96. Parameters.parameter:targetIdentifier.part
            Definition

            A named part of a multi-part parameter.

            ShortNamed part of a multi-part parameter
            Comments

            Only one level of nested parameters is allowed.

            Control0..*
            TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))