Núcleo de Interoperabilidad de Datos (NID) - MINSAL
0.4.4 - draft Chile flag

Núcleo de Interoperabilidad de Datos (NID) - MINSAL, published by Unidad de Interoperabilidad - MINSAL. This guide is not an authorized publication; it is the continuous build for version 0.4.4 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/Minsal-CL/NID/ and changes regularly. See the Directory of published versions

Resource Profile: ParametrosEntradaPixmMpi - Detailed Descriptions

Draft as of 2024-12-13

Definitions for the ParametrosEntradaPixmMpi resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Parameters
2. Parameters.parameter:sourceIdentifier
Slice NamesourceIdentifier
ShortIdentificador de busqueda, el cual será utilizado para realizar el cruse de referencia.
Must Supporttrue
4. Parameters.parameter:sourceIdentifier.name
ShortNombre para la definición
Must Supporttrue
6. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier
Slice NamevalueIdentifier
ShortIdentificador del paciente
TypeIdentifier
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
8. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.system
ShortSistema de identificador
Must Supporttrue
10. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.value
ShortValor del identificador
Must Supporttrue
12. Parameters.parameter:targetSystem
Slice NametargetSystem
ShortSistema que asigna un identificador del cual se regresara el identificador que debe ser seleccionado
Must Supporttrue
14. Parameters.parameter:targetSystem.name
ShortNombre para la definición
Must Supporttrue
16. Parameters.parameter:targetSystem.value[x]:valueUri
Slice NamevalueUri
ShortURI del valor
Typeuri
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
18. Parameters.parameter:targetSystem.value[x]:valueUri.value
ShortValor del URI
Control1..?
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here

0. Parameters
Definition

This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

ShortOperation Request or Response
Comments

The parameters that may be used are defined by the OperationDefinition resource.

Control0..*
Is Modifierfalse
Summaryfalse
2. Parameters.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Parameters.parameter
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control10..*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
SlicingThis element introduces a set of slices on Parameters.parameter. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ name
  • 6. Parameters.parameter.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Parameters.parameter.name
    Definition

    The name of the parameter (reference to the operation definition).

    ShortName from the definition
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Parameters.parameter:sourceIdentifier
    Slice NamesourceIdentifier
    Definition

    A parameter passed to or received from the operation.

    ShortIdentificador de busqueda, el cual será utilizado para realizar el cruse de referencia.Operation Parameter
    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
    inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
    12. Parameters.parameter:sourceIdentifier.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Parameters.parameter:sourceIdentifier.name
    Definition

    The name of the parameter (reference to the operation definition).

    ShortNombre para la definiciónName from the definition
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Fixed ValuesourceIdentifier
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Parameters.parameter:sourceIdentifier.value[x]
    Definition

    If the parameter is a data type.

    ShortIf parameter is a data type
    Control10..1
    This element is affected by the following invariants: inv-1
    TypeIdentifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Parameters.parameter.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
    • type @ $this
    • 18. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier
      Slice NamevalueIdentifier
      Definition

      If the parameter is a data type.

      ShortIdentificador del pacienteIf parameter is a data type
      Control10..1
      This element is affected by the following invariants: inv-1
      TypeIdentifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.use
      Definition

      The purpose of this identifier.

      Shortusual | official | temp | secondary | old (If known)
      Comments

      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.system
      Definition

      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      ShortSistema de identificadorThe namespace for the identifier value
      Comments

      Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.value
      Definition

      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      ShortValor del identificadorThe value that is unique
      Comments

      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Example<br/><b>General</b>:123456
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Parameters.parameter:targetSystem
      Slice NametargetSystem
      Definition

      A parameter passed to or received from the operation.

      ShortSistema que asigna un identificador del cual se regresara el identificador que debe ser seleccionadoOperation Parameter
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
      inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
      28. Parameters.parameter:targetSystem.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      30. Parameters.parameter:targetSystem.name
      Definition

      The name of the parameter (reference to the operation definition).

      ShortNombre para la definiciónName from the definition
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Fixed ValuetargetSystem
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Parameters.parameter:targetSystem.value[x]
      Definition

      If the parameter is a data type.

      ShortIf parameter is a data type
      Control0..1
      This element is affected by the following invariants: inv-1
      TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Parameters.parameter.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
      • type @ $this
      • 34. Parameters.parameter:targetSystem.value[x]:valueUri
        Slice NamevalueUri
        Definition

        If the parameter is a data type.

        ShortURI del valorIf parameter is a data type
        Control0..1
        This element is affected by the following invariants: inv-1
        Typeuri, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. Parameters.parameter:targetSystem.value[x]:valueUri.value
        Definition

        The actual value

        ShortValor del URIPrimitive value for uri
        Control10..1
        Typeuri
        Is Modifierfalse
        Must Supporttrue
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse

        Guidance on how to interpret the contents of this table can be found here

        0. Parameters
        Definition

        This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

        ShortOperation Request or Response
        Comments

        The parameters that may be used are defined by the OperationDefinition resource.

        Control0..*
        Is Modifierfalse
        Summaryfalse
        2. Parameters.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Is Modifierfalse
        Summarytrue
        4. Parameters.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. Parameters.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. Parameters.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. Parameters.parameter
        Definition

        A parameter passed to or received from the operation.

        ShortOperation Parameter
        Control1..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
        SlicingThis element introduces a set of slices on Parameters.parameter. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ name
        • 12. Parameters.parameter.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          14. Parameters.parameter.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          16. Parameters.parameter.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. Parameters.parameter.name
          Definition

          The name of the parameter (reference to the operation definition).

          ShortName from the definition
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          20. Parameters.parameter.value[x]
          Definition

          If the parameter is a data type.

          ShortIf parameter is a data type
          Control0..1
          This element is affected by the following invariants: inv-1
          TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          22. Parameters.parameter.resource
          Definition

          If the parameter is a whole resource.

          ShortIf parameter is a whole resource
          Comments

          When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

          Control0..1
          This element is affected by the following invariants: inv-1
          TypeResource
          Is Modifierfalse
          Summarytrue
          24. Parameters.parameter.part
          Definition

          A named part of a multi-part parameter.

          ShortNamed part of a multi-part parameter
          Comments

          Only one level of nested parameters is allowed.

          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          26. Parameters.parameter:sourceIdentifier
          Slice NamesourceIdentifier
          Definition

          A parameter passed to or received from the operation.

          ShortIdentificador de busqueda, el cual será utilizado para realizar el cruse de referencia.
          Control1..1
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
          28. Parameters.parameter:sourceIdentifier.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          30. Parameters.parameter:sourceIdentifier.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          32. Parameters.parameter:sourceIdentifier.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          34. Parameters.parameter:sourceIdentifier.name
          Definition

          The name of the parameter (reference to the operation definition).

          ShortNombre para la definición
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Fixed ValuesourceIdentifier
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. Parameters.parameter:sourceIdentifier.value[x]
          Definition

          If the parameter is a data type.

          ShortIf parameter is a data type
          Control1..1
          This element is affected by the following invariants: inv-1
          TypeIdentifier
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Parameters.parameter.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
          • type @ $this
          • 38. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier
            Slice NamevalueIdentifier
            Definition

            If the parameter is a data type.

            ShortIdentificador del paciente
            Control1..1
            This element is affected by the following invariants: inv-1
            TypeIdentifier
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            40. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            42. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Parameters.parameter.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 44. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.use
              Definition

              The purpose of this identifier.

              Shortusual | official | temp | secondary | old (If known)
              Comments

              Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

              Control0..1
              BindingThe codes SHALL be taken from IdentifierUse
              (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

              Identifies the purpose for this identifier, if known .

              Typecode
              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.type
              Definition

              A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

              ShortDescription of identifier
              Comments

              This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
              (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

              A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows users to make use of identifiers when the identifier system is not known.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              48. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.system
              Definition

              Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

              ShortSistema de identificador
              Comments

              Identifier.system is always case sensitive.

              Control1..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Requirements

              There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

              Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              50. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.value
              Definition

              The portion of the identifier typically relevant to the user and which is unique within the context of the system.

              ShortValor del identificador
              Comments

              If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Example<br/><b>General</b>:123456
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              52. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.period
              Definition

              Time period during which identifier is/was valid for use.

              ShortTime period when id is/was valid for use
              Control0..1
              TypePeriod
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.assigner
              Definition

              Organization that issued/manages the identifier.

              ShortOrganization that issued id (may be just text)
              Comments

              The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

              Control0..1
              TypeReference(Organization)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. Parameters.parameter:sourceIdentifier.resource
              Definition

              If the parameter is a whole resource.

              ShortIf parameter is a whole resource
              Comments

              When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

              Control0..1
              This element is affected by the following invariants: inv-1
              TypeResource
              Is Modifierfalse
              Summarytrue
              58. Parameters.parameter:sourceIdentifier.part
              Definition

              A named part of a multi-part parameter.

              ShortNamed part of a multi-part parameter
              Comments

              Only one level of nested parameters is allowed.

              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. Parameters.parameter:targetSystem
              Slice NametargetSystem
              Definition

              A parameter passed to or received from the operation.

              ShortSistema que asigna un identificador del cual se regresara el identificador que debe ser seleccionado
              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
              62. Parameters.parameter:targetSystem.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              64. Parameters.parameter:targetSystem.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              66. Parameters.parameter:targetSystem.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              68. Parameters.parameter:targetSystem.name
              Definition

              The name of the parameter (reference to the operation definition).

              ShortNombre para la definición
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Fixed ValuetargetSystem
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              70. Parameters.parameter:targetSystem.value[x]
              Definition

              If the parameter is a data type.

              ShortIf parameter is a data type
              Control0..1
              This element is affected by the following invariants: inv-1
              TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Parameters.parameter.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
              • type @ $this
              • 72. Parameters.parameter:targetSystem.value[x]:valueUri
                Slice NamevalueUri
                Definition

                If the parameter is a data type.

                ShortURI del valor
                Control0..1
                This element is affected by the following invariants: inv-1
                Typeuri
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                74. Parameters.parameter:targetSystem.value[x]:valueUri.id
                Definition

                unique id for the element within a resource (for internal references)

                Shortxml:id (or equivalent in JSON)
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                76. Parameters.parameter:targetSystem.value[x]:valueUri.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                78. Parameters.parameter:targetSystem.value[x]:valueUri.value
                Definition

                The actual value

                ShortValor del URI
                Control1..1
                Typeuri
                Is Modifierfalse
                Must Supporttrue
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                80. Parameters.parameter:targetSystem.resource
                Definition

                If the parameter is a whole resource.

                ShortIf parameter is a whole resource
                Comments

                When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

                Control0..1
                This element is affected by the following invariants: inv-1
                TypeResource
                Is Modifierfalse
                Summarytrue
                82. Parameters.parameter:targetSystem.part
                Definition

                A named part of a multi-part parameter.

                ShortNamed part of a multi-part parameter
                Comments

                Only one level of nested parameters is allowed.

                Control0..*
                TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))