臺灣長期照顧實作指引(TW LTC IG)
1.0.0 - STU 1.0.0

臺灣長期照顧實作指引(TW LTC IG), published by 經濟部產業發展署. This guide is not an authorized publication; it is the continuous build for version 1.0.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/Lorex/TWLongTermCare_IG_Build/ and changes regularly. See the Directory of published versions

Extension: ExtTWLTCFeeAuditRecordRef - Detailed Descriptions

Active as of 2026-07-29

Definitions for the Ext-TW-LTC-FeeAudit-RecordRef extension.

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

此 Extension 用於在長照支付審查之分案審核明細(ClaimResponse)中,結構化承載每一筆服務記錄的識別資訊:服務記錄識別碼(objid/ref_objid,長度 20)、來源系統別(source_system/ref_source_system,長度 20)與申報交易序號(trans_no,長度 10)。適用於審核通過服務記錄(ClaimResponse.item)、錯誤服務記錄(ClaimResponse.error)與 A 碼加成資料區(ClaimResponse.addItem,此時承載所加成之審核通過服務記錄之 ref_objid 與 ref_source_system)。因 ClaimResponse 之各 itemSequence 元素於 FHIR R4 為 positiveInt 且語意上僅能指向單一 Claim 內之項目序號,無法承載跨 Claim 之字串識別碼,故以本 Extension 表達。


Optional Extension Element - found in all resources.

Short長照支付審查-服務記錄識別資訊Optional Extensions Element
Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Extension.extension:objid
    Slice Nameobjid
    Definition

    An Extension

    Short服務記錄識別碼(objid;於 addItem 為 ref_objid),長度上限 20,對應該筆服務紀錄申報(LTCClaimFeeApply)之 identifier[objid].valueAdditional content defined by implementations
    Control10..1*
    TypeExtension
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. Extension.extension:objid.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..0*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 8. Extension.extension:objid.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed Valueobjid
      10. Extension.extension:objid.value[x]
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      Short服務記錄識別碼值,例如 882601915Value of extension
      Control10..1
      Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Extension.extension:sourceSystem
      Slice NamesourceSystem
      Definition

      An Extension

      Short來源系統別(source_system;於 addItem 為 ref_source_system),長度上限 20Additional content defined by implementations
      Control0..1*
      TypeExtension
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      14. Extension.extension:sourceSystem.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..0*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. Extension.extension:sourceSystem.url
        Definition

        Source of the definition for the extension code - a logical name or a URL.

        Shortidentifies the meaning of the extension
        Comments

        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

        Control1..1
        Typeuri
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        Fixed ValuesourceSystem
        18. Extension.extension:sourceSystem.value[x]
        Definition

        Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

        Short來源系統別值,例如 TranCareCenterValue of extension
        Control10..1
        Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. Extension.extension:transNo
        Slice NametransNo
        Definition

        An Extension

        Short該筆服務記錄申報時之交易序號(trans_no),長度上限 10Additional content defined by implementations
        Control0..1*
        TypeExtension
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. Extension.extension:transNo.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..0*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 24. Extension.extension:transNo.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          Fixed ValuetransNo
          26. Extension.extension:transNo.value[x]
          Definition

          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

          Short交易序號值,例如 A123456789Value of extension
          Control10..1
          Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          28. Extension.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          Fixed Valuehttp://ltc-ig.fhir.tw/StructureDefinition/Ext-TW-LTC-FeeAudit-RecordRef
          30. Extension.value[x]
          Definition

          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

          ShortValue of extension
          Control0..01
          TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

          Guidance on how to interpret the contents of this table can be foundhere

          0. Extension
          Definition

          此 Extension 用於在長照支付審查之分案審核明細(ClaimResponse)中,結構化承載每一筆服務記錄的識別資訊:服務記錄識別碼(objid/ref_objid,長度 20)、來源系統別(source_system/ref_source_system,長度 20)與申報交易序號(trans_no,長度 10)。適用於審核通過服務記錄(ClaimResponse.item)、錯誤服務記錄(ClaimResponse.error)與 A 碼加成資料區(ClaimResponse.addItem,此時承載所加成之審核通過服務記錄之 ref_objid 與 ref_source_system)。因 ClaimResponse 之各 itemSequence 元素於 FHIR R4 為 positiveInt 且語意上僅能指向單一 Claim 內之項目序號,無法承載跨 Claim 之字串識別碼,故以本 Extension 表達。

          Short長照支付審查-服務記錄識別資訊
          2. Extension.extension
          Control1..?
          4. Extension.extension:objid
          Slice Nameobjid
          Short服務記錄識別碼(objid;於 addItem 為 ref_objid),長度上限 20,對應該筆服務紀錄申報(LTCClaimFeeApply)之 identifier[objid].value
          Control1..1
          Must Supporttrue
          6. Extension.extension:objid.extension
          Control0..0
          8. Extension.extension:objid.url
          Fixed Valueobjid
          10. Extension.extension:objid.value[x]
          Short服務記錄識別碼值,例如 882601915
          Control1..?
          Typestring
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          12. Extension.extension:sourceSystem
          Slice NamesourceSystem
          Short來源系統別(source_system;於 addItem 為 ref_source_system),長度上限 20
          Control0..1
          Must Supporttrue
          14. Extension.extension:sourceSystem.extension
          Control0..0
          16. Extension.extension:sourceSystem.url
          Fixed ValuesourceSystem
          18. Extension.extension:sourceSystem.value[x]
          Short來源系統別值,例如 TranCareCenter
          Control1..?
          Typestring
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          20. Extension.extension:transNo
          Slice NametransNo
          Short該筆服務記錄申報時之交易序號(trans_no),長度上限 10
          Control0..1
          Must Supporttrue
          22. Extension.extension:transNo.extension
          Control0..0
          24. Extension.extension:transNo.url
          Fixed ValuetransNo
          26. Extension.extension:transNo.value[x]
          Short交易序號值,例如 A123456789
          Control1..?
          Typestring
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          28. Extension.url
          Fixed Valuehttp://ltc-ig.fhir.tw/StructureDefinition/Ext-TW-LTC-FeeAudit-RecordRef
          30. Extension.value[x]
          Control0..0

          Guidance on how to interpret the contents of this table can be foundhere

          0. Extension
          Definition

          此 Extension 用於在長照支付審查之分案審核明細(ClaimResponse)中,結構化承載每一筆服務記錄的識別資訊:服務記錄識別碼(objid/ref_objid,長度 20)、來源系統別(source_system/ref_source_system,長度 20)與申報交易序號(trans_no,長度 10)。適用於審核通過服務記錄(ClaimResponse.item)、錯誤服務記錄(ClaimResponse.error)與 A 碼加成資料區(ClaimResponse.addItem,此時承載所加成之審核通過服務記錄之 ref_objid 與 ref_source_system)。因 ClaimResponse 之各 itemSequence 元素於 FHIR R4 為 positiveInt 且語意上僅能指向單一 Claim 內之項目序號,無法承載跨 Claim 之字串識別碼,故以本 Extension 表達。

          Short長照支付審查-服務記錄識別資訊
          Control0..*
          This element is affected by the following invariants: ele-1
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          2. Extension.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          4. Extension.extension
          Definition

          An Extension

          ShortExtension
          Control1..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 6. Extension.extension:objid
            Slice Nameobjid
            Definition

            An Extension

            Short服務記錄識別碼(objid;於 addItem 為 ref_objid),長度上限 20,對應該筆服務紀錄申報(LTCClaimFeeApply)之 identifier[objid].value
            Control1..1
            TypeExtension
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            8. Extension.extension:objid.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            10. Extension.extension:objid.extension
            Definition

            An Extension

            ShortExtension
            Control0..0
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 12. Extension.extension:objid.url
              Definition

              Source of the definition for the extension code - a logical name or a URL.

              Shortidentifies the meaning of the extension
              Comments

              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

              Control1..1
              Typeuri
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              Fixed Valueobjid
              14. Extension.extension:objid.value[x]
              Definition

              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

              Short服務記錄識別碼值,例如 882601915
              Control1..1
              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              16. Extension.extension:sourceSystem
              Slice NamesourceSystem
              Definition

              An Extension

              Short來源系統別(source_system;於 addItem 為 ref_source_system),長度上限 20
              Control0..1
              TypeExtension
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              18. Extension.extension:sourceSystem.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              20. Extension.extension:sourceSystem.extension
              Definition

              An Extension

              ShortExtension
              Control0..0
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 22. Extension.extension:sourceSystem.url
                Definition

                Source of the definition for the extension code - a logical name or a URL.

                Shortidentifies the meaning of the extension
                Comments

                The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                Control1..1
                Typeuri
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                Fixed ValuesourceSystem
                24. Extension.extension:sourceSystem.value[x]
                Definition

                Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                Short來源系統別值,例如 TranCareCenter
                Control1..1
                Typestring
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                26. Extension.extension:transNo
                Slice NametransNo
                Definition

                An Extension

                Short該筆服務記錄申報時之交易序號(trans_no),長度上限 10
                Control0..1
                TypeExtension
                Is Modifierfalse
                Must Supporttrue
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                28. Extension.extension:transNo.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                30. Extension.extension:transNo.extension
                Definition

                An Extension

                ShortExtension
                Control0..0
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 32. Extension.extension:transNo.url
                  Definition

                  Source of the definition for the extension code - a logical name or a URL.

                  Shortidentifies the meaning of the extension
                  Comments

                  The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                  Control1..1
                  Typeuri
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  Fixed ValuetransNo
                  34. Extension.extension:transNo.value[x]
                  Definition

                  Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                  Short交易序號值,例如 A123456789
                  Control1..1
                  Typestring
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  36. Extension.url
                  Definition

                  Source of the definition for the extension code - a logical name or a URL.

                  Shortidentifies the meaning of the extension
                  Comments

                  The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                  Control1..1
                  Typeuri
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  Fixed Valuehttp://ltc-ig.fhir.tw/StructureDefinition/Ext-TW-LTC-FeeAudit-RecordRef
                  38. Extension.value[x]
                  Definition

                  Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                  ShortValue of extension
                  Control0..0
                  TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))