Supply of Products for Healthcare (SUPPLY)
0.3.0 - ci-build International flag

Supply of Products for Healthcare (SUPPLY), published by IHE Pharmacy Technical Committee. This guide is not an authorized publication; it is the continuous build for version 0.3.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/IHE/pharm-supply/ and changes regularly. See the Directory of published versions

Resource Profile: IHESupplyReceiptNotice - Detailed Descriptions

Active as of 2024-06-18

Definitions for the IHESupplyReceiptNotice resource profile.

Guidance on how to interpret the contents of this table can be found here

0. SupplyDelivery
2. SupplyDelivery.extension
Control1..?
SlicingThis element introduces a set of slices on SupplyDelivery.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. SupplyDelivery.extension:deliveryStage
    Slice NamedeliveryStage
    Control1..1
    TypeExtension(Supply delivery stage extension) (Extension Type: CodeableConcept)
    6. SupplyDelivery.extension:deliveryStage.value[x]
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Fixed Value{
      "coding" : [{
        "system" : "http://profiles.ihe.net/PHARM/supply/CodeSystem/DeliveryStageCS",
        "code" : "reception"
      }]
    }
    8. SupplyDelivery.identifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Must Supporttrue

    Guidance on how to interpret the contents of this table can be found here

    0. SupplyDelivery
    Definition

    Record of delivery of what is supplied.

    ShortDelivery of bulk Supplies
    Control0..*
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. SupplyDelivery.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. SupplyDelivery.contained
    Definition

    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

    ShortContained, inline Resources
    Comments

    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

    Control0..*
    This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
    TypeResource
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Alternate Namesinline resources, anonymous resources, contained resources
    6. SupplyDelivery.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control10..*
    TypeExtension
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on SupplyDelivery.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 8. SupplyDelivery.extension:deliveryStage
      Slice NamedeliveryStage
      Definition

      Stage of delivery reported in a SupplyDelivery.

      ShortSupply delivery stage extension
      Control1..1
      TypeExtension(Supply delivery stage extension) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Must Supportfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      10. SupplyDelivery.extension:deliveryStage.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..0*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on SupplyDelivery.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 12. SupplyDelivery.extension:deliveryStage.url
        Definition

        Source of the definition for the extension code - a logical name or a URL.

        Shortidentifies the meaning of the extension
        Comments

        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

        Control1..1
        Typeuri
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        Fixed Valuehttp://profiles.ihe.net/PHARM/supply/StructureDefinition/IHEDeliveryStageExt
        14. SupplyDelivery.extension:deliveryStage.value[x]
        Definition

        Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

        ShortValue of extension
        Control0..1
        This element is affected by the following invariants: ext-1
        BindingThe codes SHALL be taken from For codes, see Supply delivery stage value set
        (required to http://profiles.ihe.net/PHARM/supply/ValueSet/IHEDeliveryStageVS)
        TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summaryfalse
        Fixed Value{
          "coding" : [{
            "system" : "http://profiles.ihe.net/PHARM/supply/CodeSystem/DeliveryStageCS",
            "code" : "reception"
          }]
        }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. SupplyDelivery.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Must Supportfalse
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. SupplyDelivery.identifier
        Definition

        Identifier for the supply delivery event that is used to identify it across multiple disparate systems.

        ShortExternal identifier
        Comments

        This identifier is typically assigned by the supplier, and may be used to reference the delivery when exchanging information about it with other systems.

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. SupplyDelivery.status
        Definition

        A code specifying the state of the dispense event.

        Shortin-progress | completed | abandoned | entered-in-error
        Comments

        This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

        Control0..1
        BindingThe codes SHALL be taken from SupplyDeliveryStatushttp://hl7.org/fhir/ValueSet/supplydelivery-status|5.0.0
        (required to http://hl7.org/fhir/ValueSet/supplydelivery-status|5.0.0)

        Status of the supply delivery.

        Typecode
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be found here

        0. SupplyDelivery
        Definition

        Record of delivery of what is supplied.

        ShortDelivery of bulk Supplies
        Control0..*
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        2. SupplyDelivery.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

        Control0..1
        Typeid
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        4. SupplyDelivery.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. SupplyDelivery.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. SupplyDelivery.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHALL be taken from AllLanguages
        (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

        IETF language tag for a human language

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. SupplyDelivery.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        This element is affected by the following invariants: dom-6
        TypeNarrative
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. SupplyDelivery.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

        Control0..*
        This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
        TypeResource
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        14. SupplyDelivery.extension
        Definition

        An Extension

        ShortExtension
        Control1..*
        TypeExtension
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on SupplyDelivery.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 16. SupplyDelivery.extension:deliveryStage
          Slice NamedeliveryStage
          Definition

          Stage of delivery reported in a SupplyDelivery.

          ShortSupply delivery stage extension
          Control1..1
          TypeExtension(Supply delivery stage extension) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Must Supportfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. SupplyDelivery.extension:deliveryStage.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typeid
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          20. SupplyDelivery.extension:deliveryStage.extension
          Definition

          An Extension

          ShortExtension
          Control0..0
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on SupplyDelivery.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 22. SupplyDelivery.extension:deliveryStage.url
            Definition

            Source of the definition for the extension code - a logical name or a URL.

            Shortidentifies the meaning of the extension
            Comments

            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

            Control1..1
            Typeuri
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            Fixed Valuehttp://profiles.ihe.net/PHARM/supply/StructureDefinition/IHEDeliveryStageExt
            24. SupplyDelivery.extension:deliveryStage.value[x]
            Definition

            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

            ShortValue of extension
            Control0..1
            This element is affected by the following invariants: ext-1
            BindingThe codes SHALL be taken from Supply delivery stage value set
            (required to http://profiles.ihe.net/PHARM/supply/ValueSet/IHEDeliveryStageVS)
            TypeCodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summaryfalse
            Fixed Value{
              "coding" : [{
                "system" : "http://profiles.ihe.net/PHARM/supply/CodeSystem/DeliveryStageCS",
                "code" : "reception"
              }]
            }
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. SupplyDelivery.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Must Supportfalse
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            28. SupplyDelivery.identifier
            Definition

            Identifier for the supply delivery event that is used to identify it across multiple disparate systems.

            ShortExternal identifier
            Comments

            This identifier is typically assigned by the supplier, and may be used to reference the delivery when exchanging information about it with other systems.

            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. SupplyDelivery.basedOn
            Definition

            A plan, proposal or order that is fulfilled in whole or in part by this event.

            ShortFulfills plan, proposal or order
            Control0..*
            TypeReference(SupplyRequest)
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Requirements

            Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            32. SupplyDelivery.partOf
            Definition

            A larger event of which this particular event is a component or step.

            ShortPart of referenced event
            Comments

            Not to be used to link an event to an Encounter - use Event.context for that.

            [The allowed reference resources may be adjusted as appropriate for the event resource].

            Control0..*
            TypeReference(SupplyDelivery, Contract)
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Requirements

            E.g. Drug administration as part of a procedure, procedure as part of observation, etc.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            34. SupplyDelivery.status
            Definition

            A code specifying the state of the dispense event.

            Shortin-progress | completed | abandoned | entered-in-error
            Comments

            This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

            Control0..1
            BindingThe codes SHALL be taken from SupplyDeliveryStatus
            (required to http://hl7.org/fhir/ValueSet/supplydelivery-status|5.0.0)

            Status of the supply delivery.

            Typecode
            Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            36. SupplyDelivery.patient
            Definition

            A link to a resource representing the person whom the delivered item is for.

            ShortPatient for whom the item is supplied
            Control0..1
            TypeReference(Patient)
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            38. SupplyDelivery.type
            Definition

            Indicates the type of supply being provided. Examples include: Medication, Device, Biologically Derived Product.

            ShortCategory of supply event
            Control0..1
            BindingThe codes SHALL be taken from SupplyDeliverySupplyItemType
            (required to http://hl7.org/fhir/ValueSet/supplydelivery-supplyitemtype|5.0.0)

            The type of supply dispense.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            40. SupplyDelivery.suppliedItem
            Definition

            The item that is being delivered or has been supplied.

            ShortThe item that is delivered or supplied
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            42. SupplyDelivery.suppliedItem.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            This element is affected by the following invariants: ele-1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            44. SupplyDelivery.suppliedItem.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            46. SupplyDelivery.suppliedItem.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            48. SupplyDelivery.suppliedItem.quantity
            Definition

            The amount of the item that has been supplied. Unit of measure may be included.

            ShortAmount supplied
            Control0..1
            TypeQuantity(SimpleQuantity)
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            50. SupplyDelivery.suppliedItem.item[x]
            Definition

            Identifies the medication, substance, device or biologically derived product being supplied. This is either a link to a resource representing the details of the item or a code that identifies the item from a known list.

            ShortMedication, Substance, Device or Biologically Derived Product supplied
            Control0..1
            BindingFor example codes, see SupplyDeliverySupplyItemType
            (example to http://hl7.org/fhir/ValueSet/supplydelivery-supplyitemtype)

            The item that was delivered.

            TypeChoice of: CodeableConcept, Reference(Medication, Substance, Device, BiologicallyDerivedProduct, NutritionProduct, InventoryItem)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            52. SupplyDelivery.occurrence[x]
            Definition

            The date or time(s) the activity occurred.

            ShortWhen event occurred
            Comments

            [The list of types may be constrained as appropriate for the type of event].

            Control0..1
            TypeChoice of: dateTime, Period, Timing
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. SupplyDelivery.supplier
            Definition

            The individual or organization responsible for supplying the delivery.

            ShortThe item supplier
            Control0..1
            TypeReference(Practitioner, PractitionerRole, Organization)
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. SupplyDelivery.destination
            Definition

            Identification of the facility/location where the delivery was shipped to.

            ShortWhere the delivery was sent
            Control0..1
            TypeReference(Location)
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            58. SupplyDelivery.receiver
            Definition

            Identifies the individual or organization that received the delivery.

            ShortWho received the delivery
            Control0..*
            TypeReference(Practitioner, PractitionerRole, Organization)
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))