SDOH Clinical Care
3.1.0 - STU 3.1 Draft United States of America flag

SDOH Clinical Care, published by HL7 International / Patient Care. This guide is not an authorized publication; it is the continuous build for version 3.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/fhir-sdoh-clinicalcare/ and changes regularly. See the Directory of published versions

Resource Profile: SDOHCC Task For Patient - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 2

Definitions for the SDOHCC-TaskForPatient resource profile

See the documentation on how to interpret the contents of this table

0. Task
Definition

A task to be performed.

ShortA request to fulfill an SDOH questionnaire or service requestA task to be performed
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
inv-1: Last modified date must be greater than or equal to authored-on date. (lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn)
SDOH-Task-1: If Task.code is “complete-questionnaire”, then exactly one Task.input of either "questionnaire", "questionnaire-pdf", or "questionnaire-url" is required and Task.input "questionnaire-category" is required. (code.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='complete-questionnaire').exists() implies ((input.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire').exists() xor input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='questionnaire-pdf').exists() xor input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='questionnaire-url').exists()) and input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='questionnaire-category').exists()))
SDOH-Task-2: If Task.code is “general-information”, then Task.description is required and Task.output, if present, must be “general-information-response”. (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='general-information').exists() implies (description.exists() and (output.empty() or output.type.coding.all(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='general-information-response').exists())))
SDOH-Task-3: If Task.code is "review-material", then Task.focus of DocumentReference is required. (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='review-material').exists() implies focus.resolve().all($this is DocumentReference))
SDOH-Task-4: If Task.code is "make-contact", then Task.input of at least one "contact-entity" is required. (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='make-contact').exists() implies input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='contact-entity').exists())
SDOH-Task-5: If Task.input is "questionnaire", then Task.output, if present, must be "questionnaire-response". (input.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire').exists() implies (output.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire-response').exists() or output.empty()))
SDOH-Task-6: If Task.input is "questionnaire-pdf", then Task.output, if present, must be "questionnaire-pdf-completed". (input.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire-pdf').exists() implies (output.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire-pdf-completed').exists() or output.empty()))
SDOH-Task-7: If Task.code is "make-contact", then Task.description is required and Task.output, if present, must be "chosen-contact". (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='make-contact').exists() implies (description.exists() and (output.empty() or output.type.coding.all(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='chosen-contact').exists())))
inv-1: Last modified date must be greater than or equal to authored-on date. (lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn)
2. Task.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Task.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Task.partOf
Definition

Task that this particular task is part of.

ShortComposite task
Comments

This should usually be 0..1.

Control0..*
TypeReference(Task)
Is Modifierfalse
Summarytrue
Requirements

Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Task.partOf. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • profile @ resolve()
8. Task.partOf:SupportedPartOf
Slice NameSupportedPartOf
Definition

Task that this particular task is part of.

ShortComposite task
Comments

This should usually be 0..1.

Control0..*
TypeReference(SDOHCC Task For Referral Management, SDOHCC Task For Patient, Task)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Task.status
Definition

The current status of the task.

Shortdraft | requested | received | accepted | +
Comments

For further details on Task.status see Checking Task Status.

Control1..1
BindingThe codes SHALL be taken from SDOHCC ValueSet Task Statushttp://hl7.org/fhir/ValueSet/task-status|4.0.1
(required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetTaskStatus)
Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.


These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Task.statusReason
Definition

If the task is cancelled by the patient, an explanation as to why should be provided.


An explanation as to why this task is held, failed, was refused, etc.

ShortReason for current status
Comments

This applies to the current status. Look at the history of the task to see reasons for past statuses. If the Task.status is cancelled, then Task.statusReason.text should be included.


This applies to the current status. Look at the history of the task to see reasons for past statuses.

Control0..1
Binding

Codes to identify the reason for current status. These will typically be specific to a particular workflow.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Task.statusReason.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Task.intent
Definition

Indicates the "level" of actionability associated with the Task.


Indicates the "level" of actionability associated with the Task, i.e. i+R[9]Cs this a proposed task, a planned task, an actionable task, etc.

Shortorderunknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Comments

Patient tasks will always be orders.


This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances.

In most cases, Tasks will have an intent of "order".

Control1..1
BindingThe codes SHALL be taken from TaskIntenthttp://hl7.org/fhir/ValueSet/task-intent|4.0.1
(required to http://hl7.org/fhir/ValueSet/task-intent|4.0.1)

Distinguishes whether the task is a proposal, plan or full order.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Fixed Value
{
  "intent" : "order"
}
<intent value="order"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Task.priority
Definition

Indicates how quickly the Task should be addressed by the patient.


Indicates how quickly the Task should be addressed with respect to other requests.

Shortroutine | urgentroutine | urgent | asap | stat
Control10..1
BindingThe codes SHALL be taken from SDOHCC ValueSet Task Priorityhttp://hl7.org/fhir/ValueSet/request-priority|4.0.1
(required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetTaskPriority)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summaryfalse
Requirements

Used to identify the level of priority assigned to this task. For tasks identified as urgent, the ability to deliver a related sevice may be dependent on task completion.


Used to identify the service level expected while performing a task.

Meaning if MissingIf missing, this task should be performed with normal priority
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Task.code
Definition

A name or code (or both) briefly describing what the task involves.

ShortTask Type
Comments

The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.

Control10..1
BindingUnless not suitable, these codes SHALL be taken from For example codes, see SDOHCC ValueSet Task Codehttp://hl7.org/fhir/ValueSet/task-code|4.0.1
(extensible to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetTaskCode)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Task.code.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Task.description
Definition

A free-text description of what is to be performed.

ShortHuman-readable explanation of task
Comments

If Task.code is "general-information", Task.description should be displayed to the user with no other computable expectation other than allowing the patient to update the Task.status and optionally capture a free text response for Task.output.

Control0..1
This element is affected by the following invariants: SDOH-Task-2, SDOH-Task-7
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Task.focus
Definition

The request being actioned or the resource being manipulated by this task.

ShortWhat task is acting on
Comments

If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).

Control0..1
This element is affected by the following invariants: SDOH-Task-3
TypeReference(Resource)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Used to identify the thing to be done.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Task.for
Definition

The entity who benefits from the performance of the service specified in the task (e.g., the patient).

ShortBeneficiary of the Task
Control10..1
TypeReference(US Core Patient Profile, Resource)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control.

Alternate NamesPatient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Task.authoredOn
Definition

The date and time this task was created.

ShortTask Creation Date
Control10..1
This element is affected by the following invariants: inv-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summaryfalse
Requirements

Most often used along with lastUpdated to track duration of task to supporting monitoring and management.

Alternate NamesCreated Date
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Task.requester
Definition

The creator of the task.

ShortWho is asking for task to be done
Control10..1
TypeReference(SDOHCC PractitionerRole, US Core Organization Profile, Device, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Task.owner
Definition

Individual organization or Device currently responsible for task execution.

ShortResponsible individual
Comments

Tasks may be created with an owner not yet identified.

Control10..1
TypeReference(US Core Patient Profile, RelatedPerson, Practitioner, PractitionerRole, Organization, CareTeam, HealthcareService, Patient, Device, RelatedPerson)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

Identifies who is expected to perform this task.

Alternate NamesPerformer, Executer
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Task.input
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Task.input. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ type
38. Task.input.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
40. Task.input.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Task.input.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Control1..1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Task.input:Questionnaire
Slice NameQuestionnaire
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Control0..1*
This element is affected by the following invariants: SDOH-Task-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Task.input:Questionnaire.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Task.input:Questionnaire.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. The codes represent types of questionnaires that the patient might be asked to complete.


Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/uv/sdc/CodeSystem/temp",
      "code" : "questionnaire"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/uv/sdc/CodeSystem/temp"/>
    <code value="questionnaire"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Task.input:Questionnaire.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Comments

This references the SDC Base Questionnaire profile to allow the use of questionnaires (e.g. a patient satisfaction questionnaire) that are not SDOH screening questionnaires. However, for questionnaires that are intended to produce FHIR resources (e.g., Observations or Conditions), the SDC Extractable Questionnaire - StructureMap should be used.

Control1..1
Typecanonical(SDCBaseQuestionnaire), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Task.input:QuestionnairePDF
Slice NameQuestionnairePDF
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Control0..1*
This element is affected by the following invariants: SDOH-Task-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Task.input:QuestionnairePDF.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
56. Task.input:QuestionnairePDF.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-pdf"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-pdf"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Task.input:QuestionnairePDF.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Control1..1
TypeReference(US Core DocumentReference Profile), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Task.input:QuestionnaireURL
Slice NameQuestionnaireURL
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Control0..1*
This element is affected by the following invariants: SDOH-Task-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Task.input:QuestionnaireURL.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. Task.input:QuestionnaireURL.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-url"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-url"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Task.input:QuestionnaireURL.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Control1..1
Typeurl, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Task.input:QuestionnaireCategory
Slice NameQuestionnaireCategory
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Control0..1*
This element is affected by the following invariants: SDOH-Task-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Task.input:QuestionnaireCategory.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
72. Task.input:QuestionnaireCategory.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-category"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-category"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Task.input:QuestionnaireCategory.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Control1..1
BindingThe codes SHALL be taken from For codes, see SDOHCC ValueSet SDOH Questionnaire Category
(required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetSDOHQuestionnaireCategory)

Types of Social Determinant of Health (SDOH) questionnaires that the patient might be asked to complete

TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Task.input:Contact
Slice NameContact
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Comments

If Task.code is "make-contact" and multiple Task.inputs are provided, the intent is that the task owner selects only one to contact. If more than one contact needs to be made, there should be separate Tasks.

Control0..*
This element is affected by the following invariants: SDOH-Task-4
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Task.input:Contact.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
80. Task.input:Contact.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

When Task.code is "make-contact", "contact-entity" is used for Task.input.type to indicate that the task owner should contact one of the healthcare services represented in Task.input.value.


If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "contact-entity"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="contact-entity"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Task.input:Contact.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Control1..1
TypeReference(SDOHCC Healthcare Service, SDOHCC PractitionerRole, US Core Practitioner Profile, US Core Organization Profile), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Task.output
Definition

Outputs produced by the Task.

ShortInformation produced as part of task
Control0..*
This element is affected by the following invariants: SDOH-Task-2, SDOH-Task-5, SDOH-Task-6, SDOH-Task-7
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Task.output. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ type

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

86. Task.output.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
88. Task.output.type
Definition

The name of the Output parameter.

ShortLabel for output
Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Task.output.value[x]
Definition

The value of the Output parameter as a basic type.

ShortResult of output
Control1..1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Task outputs can take any form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Task.output:QuestionnaireResponse
Slice NameQuestionnaireResponse
Definition

Outputs produced by the Task.

ShortInformation produced as part of task
Control0..1*
This element is affected by the following invariants: SDOH-Task-5, SDOH-Task-6, SDOH-Task-7
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Task.output:QuestionnaireResponse.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
96. Task.output:QuestionnaireResponse.type
Definition

The name of the Output parameter.

ShortLabel for output
Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/uv/sdc/CodeSystem/temp",
      "code" : "questionnaire-response"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/uv/sdc/CodeSystem/temp"/>
    <code value="questionnaire-response"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. Task.output:QuestionnaireResponse.value[x]
Definition

The value of the Output parameter as a basic type.

ShortResult of output
Control1..1
TypeReference(SDC Questionnaire Response), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

Task outputs can take any form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Task.output:QuestionnairePDFCompleted
Slice NameQuestionnairePDFCompleted
Definition

Outputs produced by the Task.

ShortInformation produced as part of task
Control0..1*
This element is affected by the following invariants: SDOH-Task-6, SDOH-Task-5, SDOH-Task-7
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Task.output:QuestionnairePDFCompleted.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
104. Task.output:QuestionnairePDFCompleted.type
Definition

The name of the Output parameter.

ShortLabel for output
Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-pdf-completed"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-pdf-completed"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Task.output:QuestionnairePDFCompleted.value[x]
Definition

The value of the Output parameter as a basic type.

ShortResult of output
Control1..1
TypeReference(US Core DocumentReference Profile), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

Task outputs can take any form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. Task.output:GeneralInformationResponse
Slice NameGeneralInformationResponse
Definition

Outputs produced by the Task.

ShortInformation produced as part of task
Control0..*
This element is affected by the following invariants: SDOH-Task-2, SDOH-Task-7, SDOH-Task-6
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. Task.output:GeneralInformationResponse.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
112. Task.output:GeneralInformationResponse.type
Definition

The name of the Output parameter.

ShortLabel for output
Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "general-information-response"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="general-information-response"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. Task.output:GeneralInformationResponse.value[x]
Definition

The value of the Output parameter as a basic type.

ShortResult of output
Control1..1
Typemarkdown, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Task outputs can take any form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. Task.output:ChosenContact
Slice NameChosenContact
Definition

Outputs produced by the Task.

ShortInformation produced as part of task
Comments

If Task.code is "make-contact" and multiple Task.inputs are provided, the intent is that the task owner selects only one to contact and can indicate the "chosen-contact".

Control0..1*
This element is affected by the following invariants: SDOH-Task-7, SDOH-Task-5, SDOH-Task-6
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. Task.output:ChosenContact.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
120. Task.output:ChosenContact.type
Definition

The name of the Output parameter.

ShortLabel for output
Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "chosen-contact"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="chosen-contact"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. Task.output:ChosenContact.value[x]
Definition

The value of the Output parameter as a basic type.

ShortResult of output
Control1..1
Typemarkdown, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Task outputs can take any form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

See the documentation on how to interpret the contents of this table

0. Task
ShortA request to fulfill an SDOH questionnaire or service request
InvariantsSDOH-Task-1: If Task.code is “complete-questionnaire”, then exactly one Task.input of either "questionnaire", "questionnaire-pdf", or "questionnaire-url" is required and Task.input "questionnaire-category" is required. (code.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='complete-questionnaire').exists() implies ((input.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire').exists() xor input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='questionnaire-pdf').exists() xor input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='questionnaire-url').exists()) and input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='questionnaire-category').exists()))
SDOH-Task-2: If Task.code is “general-information”, then Task.description is required and Task.output, if present, must be “general-information-response”. (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='general-information').exists() implies (description.exists() and (output.empty() or output.type.coding.all(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='general-information-response').exists())))
SDOH-Task-3: If Task.code is "review-material", then Task.focus of DocumentReference is required. (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='review-material').exists() implies focus.resolve().all($this is DocumentReference))
SDOH-Task-4: If Task.code is "make-contact", then Task.input of at least one "contact-entity" is required. (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='make-contact').exists() implies input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='contact-entity').exists())
SDOH-Task-5: If Task.input is "questionnaire", then Task.output, if present, must be "questionnaire-response". (input.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire').exists() implies (output.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire-response').exists() or output.empty()))
SDOH-Task-6: If Task.input is "questionnaire-pdf", then Task.output, if present, must be "questionnaire-pdf-completed". (input.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire-pdf').exists() implies (output.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire-pdf-completed').exists() or output.empty()))
SDOH-Task-7: If Task.code is "make-contact", then Task.description is required and Task.output, if present, must be "chosen-contact". (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='make-contact').exists() implies (description.exists() and (output.empty() or output.type.coding.all(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='chosen-contact').exists())))
2. Task.partOf
SlicingThis element introduces a set of slices on Task.partOf. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • profile @ resolve()
4. Task.partOf:SupportedPartOf
Slice NameSupportedPartOf
Control0..*
TypeReference(SDOHCC Task For Referral Management, SDOHCC Task For Patient)
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
6. Task.status
Comments

For further details on Task.status see Checking Task Status.

BindingThe codes SHALL be taken from SDOHCC ValueSet Task Status
(required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetTaskStatus)
Must Supporttrue
Requirements

These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.

8. Task.statusReason
Definition

If the task is cancelled by the patient, an explanation as to why should be provided.

Comments

This applies to the current status. Look at the history of the task to see reasons for past statuses. If the Task.status is cancelled, then Task.statusReason.text should be included.

Must Supporttrue
10. Task.statusReason.text
Control1..?
Must Supporttrue
12. Task.intent
Definition

Indicates the "level" of actionability associated with the Task.

Shortorder
Comments

Patient tasks will always be orders.

Fixed Value
{
  "intent" : "order"
}
<intent value="order"/>
14. Task.priority
Definition

Indicates how quickly the Task should be addressed by the patient.

Shortroutine | urgent
Control1..?
BindingThe codes SHALL be taken from SDOHCC ValueSet Task Priority
(required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetTaskPriority)
Must Supporttrue
Requirements

Used to identify the level of priority assigned to this task. For tasks identified as urgent, the ability to deliver a related sevice may be dependent on task completion.

16. Task.code
Control1..?
BindingUnless not suitable, these codes SHALL be taken from SDOHCC ValueSet Task Code
(extensible to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetTaskCode)
Must Supporttrue
18. Task.code.text
Must Supporttrue
20. Task.description
Comments

If Task.code is "general-information", Task.description should be displayed to the user with no other computable expectation other than allowing the patient to update the Task.status and optionally capture a free text response for Task.output.

Must Supporttrue
22. Task.focus
Must Supporttrue
24. Task.for
Control1..?
TypeReference(US Core Patient Profile)
Must Supporttrue
26. Task.authoredOn
Control1..?
Must Supporttrue
28. Task.requester
Control1..?
TypeReference(SDOHCC PractitionerRole, US Core Organization Profile)
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
30. Task.owner
Control1..?
TypeReference(US Core Patient Profile, RelatedPerson)
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
32. Task.input
SlicingThis element introduces a set of slices on Task.input. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ type
34. Task.input:Questionnaire
Slice NameQuestionnaire
Control0..1
This element is affected by the following invariants: SDOH-Task-1
Must Supporttrue
36. Task.input:Questionnaire.type
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. The codes represent types of questionnaires that the patient might be asked to complete.

Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/uv/sdc/CodeSystem/temp",
      "code" : "questionnaire"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/uv/sdc/CodeSystem/temp"/>
    <code value="questionnaire"/>
  </coding>
</type>
38. Task.input:Questionnaire.value[x]
Comments

This references the SDC Base Questionnaire profile to allow the use of questionnaires (e.g. a patient satisfaction questionnaire) that are not SDOH screening questionnaires. However, for questionnaires that are intended to produce FHIR resources (e.g., Observations or Conditions), the SDC Extractable Questionnaire - StructureMap should be used.

Typecanonical(SDCBaseQuestionnaire)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
40. Task.input:QuestionnairePDF
Slice NameQuestionnairePDF
Control0..1
This element is affected by the following invariants: SDOH-Task-1
Must Supporttrue
42. Task.input:QuestionnairePDF.type
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-pdf"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-pdf"/>
  </coding>
</type>
44. Task.input:QuestionnairePDF.value[x]
TypeReference(US Core DocumentReference Profile)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
46. Task.input:QuestionnaireURL
Slice NameQuestionnaireURL
Control0..1
This element is affected by the following invariants: SDOH-Task-1
Must Supporttrue
48. Task.input:QuestionnaireURL.type
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-url"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-url"/>
  </coding>
</type>
50. Task.input:QuestionnaireURL.value[x]
Typeurl
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
52. Task.input:QuestionnaireCategory
Slice NameQuestionnaireCategory
Control0..1
This element is affected by the following invariants: SDOH-Task-1
Must Supporttrue
54. Task.input:QuestionnaireCategory.type
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-category"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-category"/>
  </coding>
</type>
56. Task.input:QuestionnaireCategory.value[x]
BindingThe codes SHALL be taken from SDOHCC ValueSet SDOH Questionnaire Category
(required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetSDOHQuestionnaireCategory)

Types of Social Determinant of Health (SDOH) questionnaires that the patient might be asked to complete

TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
58. Task.input:Contact
Slice NameContact
Comments

If Task.code is "make-contact" and multiple Task.inputs are provided, the intent is that the task owner selects only one to contact. If more than one contact needs to be made, there should be separate Tasks.

Control0..*
This element is affected by the following invariants: SDOH-Task-4
Must Supporttrue
60. Task.input:Contact.type
Comments

When Task.code is "make-contact", "contact-entity" is used for Task.input.type to indicate that the task owner should contact one of the healthcare services represented in Task.input.value.

Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "contact-entity"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="contact-entity"/>
  </coding>
</type>
62. Task.input:Contact.value[x]
TypeReference(SDOHCC Healthcare Service, SDOHCC PractitionerRole, US Core Practitioner Profile, US Core Organization Profile)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
64. Task.output
SlicingThis element introduces a set of slices on Task.output. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ type

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

66. Task.output:QuestionnaireResponse
Slice NameQuestionnaireResponse
Control0..1
This element is affected by the following invariants: SDOH-Task-5, SDOH-Task-5, SDOH-Task-6, SDOH-Task-7
Must Supporttrue
68. Task.output:QuestionnaireResponse.type
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/uv/sdc/CodeSystem/temp",
      "code" : "questionnaire-response"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/uv/sdc/CodeSystem/temp"/>
    <code value="questionnaire-response"/>
  </coding>
</type>
70. Task.output:QuestionnaireResponse.value[x]
TypeReference(SDC Questionnaire Response)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
72. Task.output:QuestionnairePDFCompleted
Slice NameQuestionnairePDFCompleted
Control0..1
This element is affected by the following invariants: SDOH-Task-6, SDOH-Task-5, SDOH-Task-6, SDOH-Task-7
Must Supporttrue
74. Task.output:QuestionnairePDFCompleted.type
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-pdf-completed"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-pdf-completed"/>
  </coding>
</type>
76. Task.output:QuestionnairePDFCompleted.value[x]
TypeReference(US Core DocumentReference Profile)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
78. Task.output:GeneralInformationResponse
Slice NameGeneralInformationResponse
Control0..*
This element is affected by the following invariants: SDOH-Task-2, SDOH-Task-7, SDOH-Task-6, SDOH-Task-7
Must Supporttrue
80. Task.output:GeneralInformationResponse.type
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "general-information-response"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="general-information-response"/>
  </coding>
</type>
82. Task.output:GeneralInformationResponse.value[x]
Typemarkdown
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
84. Task.output:ChosenContact
Slice NameChosenContact
Comments

If Task.code is "make-contact" and multiple Task.inputs are provided, the intent is that the task owner selects only one to contact and can indicate the "chosen-contact".

Control0..1
This element is affected by the following invariants: SDOH-Task-7, SDOH-Task-5, SDOH-Task-6, SDOH-Task-7
Must Supporttrue
86. Task.output:ChosenContact.type
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "chosen-contact"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="chosen-contact"/>
  </coding>
</type>
88. Task.output:ChosenContact.value[x]
Typemarkdown
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

See the documentation on how to interpret the contents of this table

0. Task
Definition

A task to be performed.

ShortA request to fulfill an SDOH questionnaire or service request
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
inv-1: Last modified date must be greater than or equal to authored-on date. (lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn)
SDOH-Task-1: If Task.code is “complete-questionnaire”, then exactly one Task.input of either "questionnaire", "questionnaire-pdf", or "questionnaire-url" is required and Task.input "questionnaire-category" is required. (code.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='complete-questionnaire').exists() implies ((input.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire').exists() xor input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='questionnaire-pdf').exists() xor input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='questionnaire-url').exists()) and input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='questionnaire-category').exists()))
SDOH-Task-2: If Task.code is “general-information”, then Task.description is required and Task.output, if present, must be “general-information-response”. (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='general-information').exists() implies (description.exists() and (output.empty() or output.type.coding.all(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='general-information-response').exists())))
SDOH-Task-3: If Task.code is "review-material", then Task.focus of DocumentReference is required. (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='review-material').exists() implies focus.resolve().all($this is DocumentReference))
SDOH-Task-4: If Task.code is "make-contact", then Task.input of at least one "contact-entity" is required. (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='make-contact').exists() implies input.type.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='contact-entity').exists())
SDOH-Task-5: If Task.input is "questionnaire", then Task.output, if present, must be "questionnaire-response". (input.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire').exists() implies (output.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire-response').exists() or output.empty()))
SDOH-Task-6: If Task.input is "questionnaire-pdf", then Task.output, if present, must be "questionnaire-pdf-completed". (input.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire-pdf').exists() implies (output.type.coding.where(system='http://hl7.org/fhir/uv/sdc/CodeSystem/temp' and code='questionnaire-pdf-completed').exists() or output.empty()))
SDOH-Task-7: If Task.code is "make-contact", then Task.description is required and Task.output, if present, must be "chosen-contact". (code.coding.where(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='make-contact').exists() implies (description.exists() and (output.empty() or output.type.coding.all(system='http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes' and code='chosen-contact').exists())))
2. Task.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Task.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Task.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Task.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Task.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Task.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. Task.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Task.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Task.identifier
Definition

The business identifier for this task.

ShortTask Instance Identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Task.instantiatesCanonical
Definition

The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.

ShortFormal definition of task
Control0..1
Typecanonical(ActivityDefinition)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Enables a formal definition of how he task is to be performed, enabling automation.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Task.instantiatesUri
Definition

The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.

ShortFormal definition of task
Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Enables a formal definition of how he task is to be performed (e.g. using BPMN, BPEL, XPDL or other formal notation to be associated with a task), enabling automation.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Task.basedOn
Definition

BasedOn refers to a higher-level authorization that triggered the creation of the task. It references a "request" resource such as a ServiceRequest, MedicationRequest, ServiceRequest, CarePlan, etc. which is distinct from the "request" resource the task is seeking to fulfill. This latter resource is referenced by FocusOn. For example, based on a ServiceRequest (= BasedOn), a task is created to fulfill a procedureRequest ( = FocusOn ) to collect a specimen from a patient.

ShortRequest fulfilled by this task
Control0..*
TypeReference(Resource)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Task.groupIdentifier
Definition

An identifier that links together multiple tasks and other requests that were created in the same context.

ShortRequisition or grouper id
Control0..1
TypeIdentifier
Is Modifierfalse
Summarytrue
Requirements

Billing and/or reporting can be linked to whether multiple requests were created as a single unit.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Task.partOf
Definition

Task that this particular task is part of.

ShortComposite task
Comments

This should usually be 0..1.

Control0..*
TypeReference(Task)
Is Modifierfalse
Summarytrue
Requirements

Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Task.partOf. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • profile @ resolve()
30. Task.partOf:SupportedPartOf
Slice NameSupportedPartOf
Definition

Task that this particular task is part of.

ShortComposite task
Comments

This should usually be 0..1.

Control0..*
TypeReference(SDOHCC Task For Referral Management, SDOHCC Task For Patient)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Task.status
Definition

The current status of the task.

Shortdraft | requested | received | accepted | +
Comments

For further details on Task.status see Checking Task Status.

Control1..1
BindingThe codes SHALL be taken from SDOHCC ValueSet Task Status
(required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetTaskStatus)
Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Task.statusReason
Definition

If the task is cancelled by the patient, an explanation as to why should be provided.

ShortReason for current status
Comments

This applies to the current status. Look at the history of the task to see reasons for past statuses. If the Task.status is cancelled, then Task.statusReason.text should be included.

Control0..1
Binding

Codes to identify the reason for current status. These will typically be specific to a particular workflow.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Task.statusReason.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
38. Task.statusReason.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Task.statusReason.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
40. Task.statusReason.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..*
TypeCoding
Is Modifierfalse
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Task.statusReason.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Task.businessStatus
Definition

Contains business-specific nuances of the business state.

ShortE.g. "Specimen collected", "IV prepped"
Control0..1
Binding

The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

There's often a need to track substates of a task - this is often variable by specific workflow implementation.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Task.intent
Definition

Indicates the "level" of actionability associated with the Task.

Shortorder
Comments

Patient tasks will always be orders.

Control1..1
BindingThe codes SHALL be taken from TaskIntent
(required to http://hl7.org/fhir/ValueSet/task-intent|4.0.1)

Distinguishes whether the task is a proposal, plan or full order.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Fixed Value
{
  "intent" : "order"
}
<intent value="order"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Task.priority
Definition

Indicates how quickly the Task should be addressed by the patient.

Shortroutine | urgent
Control1..1
BindingThe codes SHALL be taken from SDOHCC ValueSet Task Priority
(required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetTaskPriority)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summaryfalse
Requirements

Used to identify the level of priority assigned to this task. For tasks identified as urgent, the ability to deliver a related sevice may be dependent on task completion.

Meaning if MissingIf missing, this task should be performed with normal priority
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Task.code
Definition

A name or code (or both) briefly describing what the task involves.

ShortTask Type
Comments

The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from SDOHCC ValueSet Task Code
(extensible to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetTaskCode)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Task.code.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
54. Task.code.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Task.code.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
56. Task.code.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..*
TypeCoding
Is Modifierfalse
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Task.code.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Task.description
Definition

A free-text description of what is to be performed.

ShortHuman-readable explanation of task
Comments

If Task.code is "general-information", Task.description should be displayed to the user with no other computable expectation other than allowing the patient to update the Task.status and optionally capture a free text response for Task.output.

Control0..1
This element is affected by the following invariants: SDOH-Task-2, SDOH-Task-7
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Task.focus
Definition

The request being actioned or the resource being manipulated by this task.

ShortWhat task is acting on
Comments

If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).

Control0..1
This element is affected by the following invariants: SDOH-Task-3
TypeReference(Resource)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Used to identify the thing to be done.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Task.for
Definition

The entity who benefits from the performance of the service specified in the task (e.g., the patient).

ShortBeneficiary of the Task
Control1..1
TypeReference(US Core Patient Profile)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control.

Alternate NamesPatient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Task.encounter
Definition

The healthcare event (e.g. a patient and healthcare provider interaction) during which this task was created.

ShortHealthcare event during which this task originated
Control0..1
TypeReference(Encounter)
Is Modifierfalse
Summarytrue
Requirements

For some tasks it may be important to know the link between the encounter the task originated within.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Task.executionPeriod
Definition

Identifies the time action was first taken against the task (start) and/or the time final action was taken against the task prior to marking it as completed (end).

ShortStart and end time of execution
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Task.authoredOn
Definition

The date and time this task was created.

ShortTask Creation Date
Control1..1
This element is affected by the following invariants: inv-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summaryfalse
Requirements

Most often used along with lastUpdated to track duration of task to supporting monitoring and management.

Alternate NamesCreated Date
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Task.lastModified
Definition

The date and time of last modification to this task.

ShortTask Last Modified Date
Control0..1
This element is affected by the following invariants: inv-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Used along with history to track task activity and time in a particular task state. This enables monitoring and management.

Alternate NamesUpdate Date
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Task.requester
Definition

The creator of the task.

ShortWho is asking for task to be done
Control1..1
TypeReference(SDOHCC PractitionerRole, US Core Organization Profile)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Task.performerType
Definition

The kind of participant that should perform the task.

ShortRequested performer
Control0..*
BindingThe codes SHOULD be taken from ProcedurePerformerRoleCodes
(preferred to http://hl7.org/fhir/ValueSet/performer-role|4.0.1)

The type(s) of task performers allowed.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Use to distinguish tasks on different activity queues.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Task.owner
Definition

Individual organization or Device currently responsible for task execution.

ShortResponsible individual
Comments

Tasks may be created with an owner not yet identified.

Control1..1
TypeReference(US Core Patient Profile, RelatedPerson)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

Identifies who is expected to perform this task.

Alternate NamesPerformer, Executer
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. Task.location
Definition

Principal physical location where the this task is performed.

ShortWhere task occurs
Control0..1
TypeReference(Location)
Is Modifierfalse
Summarytrue
Requirements

Ties the event to where the records are likely kept and provides context around the event occurrence (e.g. if it occurred inside or outside a dedicated healthcare setting).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Task.reasonCode
Definition

A description or code indicating why this task needs to be performed.

ShortWhy task is needed
Comments

This should only be included if there is no focus or if it differs from the reason indicated on the focus.

Control0..1
Binding

Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Task.reasonReference
Definition

A resource reference indicating why this task needs to be performed.

ShortWhy task is needed
Comments

Tasks might be justified based on an Observation, a Condition, a past or planned procedure, etc. This should only be included if there is no focus or if it differs from the reason indicated on the focus. Use the CodeableConcept text element in Task.reasonCode if the data is free (uncoded) text.

Control0..1
TypeReference(Resource)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Task.insurance
Definition

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be relevant to the Task.

ShortAssociated insurance coverage
Control0..*
TypeReference(Coverage, ClaimResponse)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Task.note
Definition

Free-text information captured about the task as it progresses.

ShortComments made about the task
Control0..*
TypeAnnotation
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Task.relevantHistory
Definition

Links to Provenance records for past versions of this Task that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the task.

ShortKey events in history of the Task
Comments

This element does not point to the Provenance associated with the current version of the resource - as it would be created after this version existed. The Provenance for the current version can be retrieved with a _revinclude.

Control0..*
TypeReference(Provenance)
Is Modifierfalse
Summaryfalse
Alternate NamesStatus History
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Task.restriction
Definition

If the Task.focus is a request resource and the task is seeking fulfillment (i.e. is asking for the request to be actioned), this element identifies any limitations on what parts of the referenced request should be actioned.

ShortConstraints on fulfillment tasks
Control0..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

Sometimes when fulfillment is sought, you don't want full fulfillment.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Task.restriction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
96. Task.restriction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
98. Task.restriction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
100. Task.restriction.repetitions
Definition

Indicates the number of times the requested action should occur.

ShortHow many times to repeat
Control0..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

E.g. order that requests monthly lab tests, fulfillment is sought for 1.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Task.restriction.period
Definition

Over what time-period is fulfillment sought.

ShortWhen fulfillment sought
Comments

Note that period.high is the due date representing the time by which the task should be completed.

Control0..1
TypePeriod
Is Modifierfalse
Summaryfalse
Requirements

E.g. order that authorizes 1 year's services. Fulfillment is sought for next 3 months.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Task.restriction.recipient
Definition

For requests that are targeted to more than on potential recipient/target, for whom is fulfillment sought?

ShortFor whom is fulfillment sought?
Control0..*
TypeReference(Patient, Practitioner, PractitionerRole, RelatedPerson, Group, Organization)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Task.input
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Task.input. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ type
108. Task.input.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
110. Task.input.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
112. Task.input.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
114. Task.input.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. Task.input.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Control1..1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. Task.input:Questionnaire
Slice NameQuestionnaire
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Control0..1
This element is affected by the following invariants: SDOH-Task-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. Task.input:Questionnaire.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
122. Task.input:Questionnaire.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
124. Task.input:Questionnaire.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
126. Task.input:Questionnaire.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. The codes represent types of questionnaires that the patient might be asked to complete.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/uv/sdc/CodeSystem/temp",
      "code" : "questionnaire"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/uv/sdc/CodeSystem/temp"/>
    <code value="questionnaire"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. Task.input:Questionnaire.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Comments

This references the SDC Base Questionnaire profile to allow the use of questionnaires (e.g. a patient satisfaction questionnaire) that are not SDOH screening questionnaires. However, for questionnaires that are intended to produce FHIR resources (e.g., Observations or Conditions), the SDC Extractable Questionnaire - StructureMap should be used.

Control1..1
Typecanonical(SDCBaseQuestionnaire)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. Task.input:QuestionnairePDF
Slice NameQuestionnairePDF
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Control0..1
This element is affected by the following invariants: SDOH-Task-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. Task.input:QuestionnairePDF.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
134. Task.input:QuestionnairePDF.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
136. Task.input:QuestionnairePDF.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
138. Task.input:QuestionnairePDF.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-pdf"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-pdf"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
140. Task.input:QuestionnairePDF.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Control1..1
TypeReference(US Core DocumentReference Profile)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
142. Task.input:QuestionnaireURL
Slice NameQuestionnaireURL
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Control0..1
This element is affected by the following invariants: SDOH-Task-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
144. Task.input:QuestionnaireURL.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
146. Task.input:QuestionnaireURL.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
148. Task.input:QuestionnaireURL.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
150. Task.input:QuestionnaireURL.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-url"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-url"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
152. Task.input:QuestionnaireURL.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Control1..1
Typeurl
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
154. Task.input:QuestionnaireCategory
Slice NameQuestionnaireCategory
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Control0..1
This element is affected by the following invariants: SDOH-Task-1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
156. Task.input:QuestionnaireCategory.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
158. Task.input:QuestionnaireCategory.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
160. Task.input:QuestionnaireCategory.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
162. Task.input:QuestionnaireCategory.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-category"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-category"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
164. Task.input:QuestionnaireCategory.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Control1..1
BindingThe codes SHALL be taken from SDOHCC ValueSet SDOH Questionnaire Category
(required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetSDOHQuestionnaireCategory)

Types of Social Determinant of Health (SDOH) questionnaires that the patient might be asked to complete

TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
166. Task.input:Contact
Slice NameContact
Definition

Additional information that may be needed in the execution of the task.

ShortInformation used to perform task
Comments

If Task.code is "make-contact" and multiple Task.inputs are provided, the intent is that the task owner selects only one to contact. If more than one contact needs to be made, there should be separate Tasks.

Control0..*
This element is affected by the following invariants: SDOH-Task-4
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Alternate NamesSupporting Information
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
168. Task.input:Contact.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
170. Task.input:Contact.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
172. Task.input:Contact.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
174. Task.input:Contact.type
Definition

A code or description indicating how the input is intended to be used as part of the task execution.

ShortLabel for the input
Comments

When Task.code is "make-contact", "contact-entity" is used for Task.input.type to indicate that the task owner should contact one of the healthcare services represented in Task.input.value.

Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Inputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "contact-entity"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="contact-entity"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
176. Task.input:Contact.value[x]
Definition

The value of the input parameter as a basic type.

ShortContent to use in performing the task
Control1..1
TypeReference(SDOHCC Healthcare Service, SDOHCC PractitionerRole, US Core Practitioner Profile, US Core Organization Profile)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
178. Task.output
Definition

Outputs produced by the Task.

ShortInformation produced as part of task
Control0..*
This element is affected by the following invariants: SDOH-Task-2, SDOH-Task-5, SDOH-Task-6, SDOH-Task-7
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Task.output. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ type

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

180. Task.output.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
182. Task.output.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
184. Task.output.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
186. Task.output.type
Definition

The name of the Output parameter.

ShortLabel for output
Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
188. Task.output.value[x]
Definition

The value of the Output parameter as a basic type.

ShortResult of output
Control1..1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Task outputs can take any form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
190. Task.output:QuestionnaireResponse
Slice NameQuestionnaireResponse
Definition

Outputs produced by the Task.

ShortInformation produced as part of task
Control0..1
This element is affected by the following invariants: SDOH-Task-5, SDOH-Task-6, SDOH-Task-7
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
192. Task.output:QuestionnaireResponse.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
194. Task.output:QuestionnaireResponse.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
196. Task.output:QuestionnaireResponse.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
198. Task.output:QuestionnaireResponse.type
Definition

The name of the Output parameter.

ShortLabel for output
Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/uv/sdc/CodeSystem/temp",
      "code" : "questionnaire-response"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/uv/sdc/CodeSystem/temp"/>
    <code value="questionnaire-response"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
200. Task.output:QuestionnaireResponse.value[x]
Definition

The value of the Output parameter as a basic type.

ShortResult of output
Control1..1
TypeReference(SDC Questionnaire Response)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

Task outputs can take any form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
202. Task.output:QuestionnairePDFCompleted
Slice NameQuestionnairePDFCompleted
Definition

Outputs produced by the Task.

ShortInformation produced as part of task
Control0..1
This element is affected by the following invariants: SDOH-Task-6, SDOH-Task-5, SDOH-Task-7
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
204. Task.output:QuestionnairePDFCompleted.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
206. Task.output:QuestionnairePDFCompleted.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
208. Task.output:QuestionnairePDFCompleted.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
210. Task.output:QuestionnairePDFCompleted.type
Definition

The name of the Output parameter.

ShortLabel for output
Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "questionnaire-pdf-completed"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="questionnaire-pdf-completed"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
212. Task.output:QuestionnairePDFCompleted.value[x]
Definition

The value of the Output parameter as a basic type.

ShortResult of output
Control1..1
TypeReference(US Core DocumentReference Profile)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

Task outputs can take any form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
214. Task.output:GeneralInformationResponse
Slice NameGeneralInformationResponse
Definition

Outputs produced by the Task.

ShortInformation produced as part of task
Control0..*
This element is affected by the following invariants: SDOH-Task-2, SDOH-Task-7, SDOH-Task-6
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
216. Task.output:GeneralInformationResponse.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
218. Task.output:GeneralInformationResponse.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
220. Task.output:GeneralInformationResponse.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
222. Task.output:GeneralInformationResponse.type
Definition

The name of the Output parameter.

ShortLabel for output
Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "general-information-response"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="general-information-response"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
224. Task.output:GeneralInformationResponse.value[x]
Definition

The value of the Output parameter as a basic type.

ShortResult of output
Control1..1
Typemarkdown
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Task outputs can take any form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
226. Task.output:ChosenContact
Slice NameChosenContact
Definition

Outputs produced by the Task.

ShortInformation produced as part of task
Comments

If Task.code is "make-contact" and multiple Task.inputs are provided, the intent is that the task owner selects only one to contact and can indicate the "chosen-contact".

Control0..1
This element is affected by the following invariants: SDOH-Task-7, SDOH-Task-5, SDOH-Task-6
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
228. Task.output:ChosenContact.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
230. Task.output:ChosenContact.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
232. Task.output:ChosenContact.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
234. Task.output:ChosenContact.type
Definition

The name of the Output parameter.

ShortLabel for output
Control1..1
Binding

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Outputs are named to enable task automation to bind data and pass it from one task to the next.

Alternate NamesName
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes",
      "code" : "chosen-contact"
    }
  ]
}
<type>
  <coding>
    <system value="http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes"/>
    <code value="chosen-contact"/>
  </coding>
</type>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
236. Task.output:ChosenContact.value[x]
Definition

The value of the Output parameter as a basic type.

ShortResult of output
Control1..1
Typemarkdown
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Task outputs can take any form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))