COVID-19 FHIR Profile Library IG Informative Version, published by HL7 International - Clinical Information Modeling Initiative. This is not an authorized publication; it is the continuous build for version 1.0.0). This version is based on the current content of https://github.com/HL7/fhir-COVID19Library-ig/ and changes regularly. See the Directory of published versions
Active as of 2022-07-25 |
Definitions for the SARScoronavirus2AbIgGPlusIgMPrThrPtSerPlasOrdIALabObs resource profile.
1. Observation | |||||
Definition | This profile is created to meet the 2015 Edition Common Clinical Data Set 'Laboratory test(s) and Laboratory value(s)/result(s)' requirements. | ||||
Control | 0..* | ||||
Alternate Names | Vital Signs, Measurement, Results, Tests | ||||
Comments | Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc. | ||||
Invariants | Defined on this element dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (: text.`div`.exists()) obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (: dataAbsentReason.empty() or value.empty()) obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()) us-core-2: If there is no component or related element then either a value[x] or a data absent reason must be present (: (component.empty() and related.empty()) implies (dataAbsentReason or value)) | ||||
2. Observation.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Control | 0..1 | ||||
Type | string | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
3. Observation.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
4. Observation.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
5. Observation.language | |||||
Definition | The base language in which the resource is written. | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages
A human language.
| ||||
Type | code | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
6. Observation.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
7. Observation.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
8. Observation.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
9. Observation.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
10. Observation.identifier | |||||
Definition | A unique identifier assigned to this observation. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Requirements | Allows observations to be distinguished and referenced. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
Slicing | This element introduces a set of slices on Observation.identifier. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
11. Observation.identifier:accessionIdentifier | |||||
SliceName | accessionIdentifier | ||||
Definition | A unique identifier assigned to this observation. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 | ||||
Type | Identifier | ||||
Requirements | Allows observations to be distinguished and referenced. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
12. Observation.identifier:accessionIdentifier.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
13. Observation.identifier:accessionIdentifier.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on Observation.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
14. Observation.identifier:accessionIdentifier.use | |||||
Definition | The purpose of this identifier. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from IdentifierUse Identifies the purpose for this identifier, if known . | ||||
Type | code | ||||
Is Modifier | true | ||||
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. | ||||
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
15. Observation.identifier:accessionIdentifier.type | |||||
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from Identifier Type Codes; other codes may be used where these codes are not suitable A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. | ||||
Type | CodeableConcept | ||||
Requirements | Allows users to make use of identifiers when the identifier system is not known. | ||||
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. | ||||
Pattern Value | <valueCodeableConcept xmlns="http://hl7.org/fhir"> <coding> <system value="http://terminology.hl7.org/CodeSystem/v2-0203"/> <code value="ACSN"/> </coding> </valueCodeableConcept> | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
16. Observation.identifier:accessionIdentifier.system | |||||
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. | ||||
Comments | Identifier.system is always case sensitive. | ||||
Example | General:http://www.acme.com/identifiers/patient | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
17. Observation.identifier:accessionIdentifier.value | |||||
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. | ||||
Control | 0..1 | ||||
Type | string | ||||
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. | ||||
Example | General:123456 | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
18. Observation.identifier:accessionIdentifier.period | |||||
Definition | Time period during which identifier is/was valid for use. | ||||
Control | 0..1 | ||||
Type | Period | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
19. Observation.identifier:accessionIdentifier.assigner | |||||
Definition | Organization that issued/manages the identifier. | ||||
Control | 0..1 | ||||
Type | Reference(Organization) | ||||
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
20. Observation.identifier:fillerOrderNumber | |||||
SliceName | fillerOrderNumber | ||||
Definition | A unique identifier assigned to this observation. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 | ||||
Type | Identifier | ||||
Requirements | Allows observations to be distinguished and referenced. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
21. Observation.identifier:fillerOrderNumber.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
22. Observation.identifier:fillerOrderNumber.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on Observation.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
23. Observation.identifier:fillerOrderNumber.use | |||||
Definition | The purpose of this identifier. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from IdentifierUse Identifies the purpose for this identifier, if known . | ||||
Type | code | ||||
Is Modifier | true | ||||
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. | ||||
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
24. Observation.identifier:fillerOrderNumber.type | |||||
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from Identifier Type Codes; other codes may be used where these codes are not suitable A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. | ||||
Type | CodeableConcept | ||||
Requirements | Allows users to make use of identifiers when the identifier system is not known. | ||||
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. | ||||
Pattern Value | <valueCodeableConcept xmlns="http://hl7.org/fhir"> <coding> <system value="http://terminology.hl7.org/CodeSystem/v2-0203"/> <code value="FILL"/> </coding> </valueCodeableConcept> | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
25. Observation.identifier:fillerOrderNumber.system | |||||
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. | ||||
Comments | Identifier.system is always case sensitive. | ||||
Example | General:http://www.acme.com/identifiers/patient | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
26. Observation.identifier:fillerOrderNumber.value | |||||
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. | ||||
Control | 0..1 | ||||
Type | string | ||||
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. | ||||
Example | General:123456 | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
27. Observation.identifier:fillerOrderNumber.period | |||||
Definition | Time period during which identifier is/was valid for use. | ||||
Control | 0..1 | ||||
Type | Period | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
28. Observation.identifier:fillerOrderNumber.assigner | |||||
Definition | Organization that issued/manages the identifier. | ||||
Control | 0..1 | ||||
Type | Reference(Organization) | ||||
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
29. Observation.identifier:placerOrderNumber | |||||
SliceName | placerOrderNumber | ||||
Definition | A unique identifier assigned to this observation. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 | ||||
Type | Identifier | ||||
Requirements | Allows observations to be distinguished and referenced. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
30. Observation.identifier:placerOrderNumber.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
31. Observation.identifier:placerOrderNumber.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on Observation.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
32. Observation.identifier:placerOrderNumber.use | |||||
Definition | The purpose of this identifier. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from IdentifierUse Identifies the purpose for this identifier, if known . | ||||
Type | code | ||||
Is Modifier | true | ||||
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. | ||||
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
33. Observation.identifier:placerOrderNumber.type | |||||
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from Identifier Type Codes; other codes may be used where these codes are not suitable A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. | ||||
Type | CodeableConcept | ||||
Requirements | Allows users to make use of identifiers when the identifier system is not known. | ||||
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. | ||||
Pattern Value | <valueCodeableConcept xmlns="http://hl7.org/fhir"> <coding> <system value="http://terminology.hl7.org/CodeSystem/v2-0203"/> <code value="PLAC"/> </coding> </valueCodeableConcept> | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
34. Observation.identifier:placerOrderNumber.system | |||||
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. | ||||
Comments | Identifier.system is always case sensitive. | ||||
Example | General:http://www.acme.com/identifiers/patient | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
35. Observation.identifier:placerOrderNumber.value | |||||
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. | ||||
Control | 0..1 | ||||
Type | string | ||||
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. | ||||
Example | General:123456 | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
36. Observation.identifier:placerOrderNumber.period | |||||
Definition | Time period during which identifier is/was valid for use. | ||||
Control | 0..1 | ||||
Type | Period | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
37. Observation.identifier:placerOrderNumber.assigner | |||||
Definition | Organization that issued/manages the identifier. | ||||
Control | 0..1 | ||||
Type | Reference(Organization) | ||||
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
38. Observation.basedOn | |||||
Definition | A plan, proposal or order that is fulfilled in whole or in part by this event. For example, a MedicationRequest may require a patient to have laboratory test performed before it is dispensed. | ||||
Control | 0..* | ||||
Type | Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest) | ||||
Requirements | Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon. | ||||
Alternate Names | Fulfills | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
39. Observation.partOf | |||||
Definition | A larger event of which this particular Observation is a component or step. For example, an observation as part of a procedure. | ||||
Control | 0..* | ||||
Type | Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy) | ||||
Alternate Names | Container | ||||
Comments | To link an Observation to an Encounter use | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
40. Observation.status | |||||
Definition | The status of the result value. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from ObservationStatus | ||||
Type | code | ||||
Is Modifier | true | ||||
Must Support | true | ||||
Requirements | Need to track the status of individual results. Some results are finalized before the whole report is finalized. | ||||
Comments | This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
41. Observation.category | |||||
Definition | A code that classifies the general type of observation being made. | ||||
Control | 1..* | ||||
Binding | The codes SHOULD be taken from ObservationCategoryCodes Codes for high level observation categories. | ||||
Type | CodeableConcept | ||||
Must Support | true | ||||
Requirements | Used for filtering what observations are retrieved and displayed. | ||||
Comments | In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
Slicing | This element introduces a set of slices on Observation.category. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
42. Observation.category:Laboratory | |||||
SliceName | Laboratory | ||||
Definition | A code that classifies the general type of observation being made. | ||||
Control | 1..1 | ||||
Binding | The codes SHOULD be taken from ObservationCategoryCodes Codes for high level observation categories. | ||||
Type | CodeableConcept | ||||
Must Support | true | ||||
Requirements | Used for filtering what observations are retrieved and displayed. | ||||
Comments | In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set. | ||||
Pattern Value | <valueCodeableConcept xmlns="http://hl7.org/fhir"> <coding> <system value="http://terminology.hl7.org/CodeSystem/observation-category"/> <code value="laboratory"/> </coding> </valueCodeableConcept> | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
43. Observation.code | |||||
Definition | The test that was performed. A LOINC SHALL be used if the concept is present in LOINC. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from LOINCCodes; other codes may be used where these codes are not suitable LOINC codes | ||||
Type | CodeableConcept | ||||
Must Support | true | ||||
Requirements | Knowing what kind of observation is being made is essential to understanding the observation. | ||||
Alternate Names | Name, Test Name, Observation Identifer | ||||
Comments | The typical patterns for codes are: 1) a LOINC code either as a translation from a "local" code or as a primary code, or 2) a local code only if no suitable LOINC exists, or 3) both the local and the LOINC translation. Systems SHALL be capable of sending the local code if one exists. When using LOINC , Use either the SHORTNAME or LONG_COMMON_NAME field for the display. | ||||
Pattern Value | <valueCodeableConcept xmlns="http://hl7.org/fhir"> <coding> <system value="http://loinc.org"/> <code value="94547-7"/> </coding> </valueCodeableConcept> | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
44. Observation.subject | |||||
Definition | The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the | ||||
Control | 1..1 | ||||
Type | Reference(USCorePatientProfile) | ||||
Must Support | true | ||||
Requirements | Observations have no value if you don't know who or what they're about. | ||||
Comments | One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
45. Observation.focus | |||||
Definition | The actual focus of an observation when it is not the patient of record representing something or someone associated with the patient such as a spouse, parent, fetus, or donor. For example, fetus observations in a mother's record. The focus of an observation could also be an existing condition, an intervention, the subject's diet, another observation of the subject, or a body structure such as tumor or implanted device. An example use case would be using the Observation resource to capture whether the mother is trained to change her child's tracheostomy tube. In this example, the child is the patient of record and the mother is the focus. | ||||
Control | 0..* | ||||
Type | Reference(Resource) | ||||
Comments | Typically, an observation is made about the subject - a patient, or group of patients, location, or device - and the distinction between the subject and what is directly measured for an observation is specified in the observation code itself ( e.g., "Blood Glucose") and does not need to be represented separately using this element. Use | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
46. Observation.encounter | |||||
Definition | The healthcare event (e.g. a patient and healthcare provider interaction) during which this observation is made. | ||||
Control | 0..1 | ||||
Type | Reference(Encounter) | ||||
Requirements | For some observations it may be important to know the link between an observation and a particular encounter. | ||||
Alternate Names | Context | ||||
Comments | This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
47. Observation.effective[x] | |||||
Definition | For lab tests this is the specimen collection date. For Ask at Order Entry Questions (AOE)'s this is the date the question was asked. | ||||
Control | 0..1 This element is affected by the following invariants: us-core-1 | ||||
Type | Choice of: dateTime, Period | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Must Support | true | ||||
Must Support Types | No must-support rules about the choice of types/profiles | ||||
Requirements | Knowing when an observation was deemed true is important to its relevance as well as determining trends. | ||||
Alternate Names | Occurrence | ||||
Comments | At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) us-core-1: Datetime must be at least to day. (: ($this as dateTime).toString().length() >= 8) | ||||
48. Observation.issued | |||||
Definition | The date and time this version of the observation was made available to providers, typically after the results have been reviewed and verified. | ||||
Control | 0..1 | ||||
Type | instant | ||||
Comments | For Observations that don’t require review and verification, it may be the same as the | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
49. Observation.performer | |||||
Definition | Who was responsible for asserting the observed value as "true". | ||||
Control | 0..* | ||||
Type | Reference(Practitioner | Organization) | ||||
Requirements | May give a degree of confidence in the observation and also indicates where follow-up questions should be directed. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
Slicing | This element introduces a set of slices on Observation.performer. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
50. Observation.performer:responsibleObserver | |||||
SliceName | responsibleObserver | ||||
Definition | Who was responsible for asserting the observed value as "true". | ||||
Control | 0..1 | ||||
Type | Reference(Practitioner) | ||||
Requirements | May give a degree of confidence in the observation and also indicates where follow-up questions should be directed. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
51. Observation.performer:performingLaboratory | |||||
SliceName | performingLaboratory | ||||
Definition | Who was responsible for asserting the observed value as "true". | ||||
Control | 0..1 | ||||
Type | Reference(Organization) | ||||
Requirements | May give a degree of confidence in the observation and also indicates where follow-up questions should be directed. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
52. Observation.performer:performingOrganizationMedicalDirector | |||||
SliceName | performingOrganizationMedicalDirector | ||||
Definition | Who was responsible for asserting the observed value as "true". | ||||
Control | 0..1 | ||||
Type | Reference(Practitioner) | ||||
Requirements | May give a degree of confidence in the observation and also indicates where follow-up questions should be directed. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
53. Observation.value[x] | |||||
Definition | The Laboratory result value. If a coded value, the valueCodeableConcept.code SHOULD be selected from SNOMED CT. If a numeric value, valueQuantity.code SHALL be selected from UCUM. A FHIR UCUM Codes value set that defines all UCUM codes is in the FHIR specification. | ||||
Control | 0..1 This element is affected by the following invariants: obs-7, us-core-2, us-core-3, us-core-4 | ||||
Type | CodeableConcept | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Must Support | true | ||||
Requirements | An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations. | ||||
Comments | An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) us-core-3: SHALL use UCUM for coded quantity units. (: valueQuantity.system.empty() or valueQuantity.system = 'http://unitsofmeasure.org') us-core-4: SHOULD use Snomed CT for coded Results (: valueCodeableConcept.coding.system.empty() or valueCodeableConcept.coding.system = 'http://snomed.info/sct') | ||||
Slicing | This element introduces a set of slices on Observation.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
| ||||
54. Observation.value[x]:valueCodeableConcept | |||||
SliceName | valueCodeableConcept | ||||
Definition | The Laboratory result value. If a coded value, the valueCodeableConcept.code SHOULD be selected from SNOMED CT. If a numeric value, valueQuantity.code SHALL be selected from UCUM. A FHIR UCUM Codes value set that defines all UCUM codes is in the FHIR specification. | ||||
Control | 0..1 This element is affected by the following invariants: obs-7, us-core-2, us-core-3, us-core-4 | ||||
Binding | The codes SHALL be taken from Positive/Negative Value Set; other codes may be used where these codes are not suitable | ||||
Type | CodeableConcept | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Must Support | true | ||||
Requirements | An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations. | ||||
Comments | An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) us-core-3: SHALL use UCUM for coded quantity units. (: valueQuantity.system.empty() or valueQuantity.system = 'http://unitsofmeasure.org') us-core-4: SHOULD use Snomed CT for coded Results (: valueCodeableConcept.coding.system.empty() or valueCodeableConcept.coding.system = 'http://snomed.info/sct') | ||||
55. Observation.dataAbsentReason | |||||
Definition | Provides a reason why the expected value in the element Observation.value[x] is missing. | ||||
Control | 0..1 This element is affected by the following invariants: obs-6, us-core-2 | ||||
Binding | The codes SHALL be taken from DataAbsentReason; other codes may be used where these codes are not suitable | ||||
Type | CodeableConcept | ||||
Must Support | true | ||||
Requirements | For many results it is necessary to handle exceptional values in measurements. | ||||
Comments | Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory". The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
56. Observation.interpretation | |||||
Definition | A categorical assessment of an observation value. For example, high, low, normal. | ||||
Control | 0..* | ||||
Binding | The codes SHALL be taken from ObservationInterpretationCodes; other codes may be used where these codes are not suitable Codes identifying interpretations of observations. | ||||
Type | CodeableConcept | ||||
Requirements | For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result. | ||||
Alternate Names | Abnormal Flag | ||||
Comments | Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
57. Observation.note | |||||
Definition | Comments about the observation or the results. | ||||
Control | 0..* | ||||
Type | Annotation | ||||
Requirements | Need to be able to provide free text additional information. | ||||
Comments | May include general statements about the observation, or statements about significant, unexpected or unreliable results values, or information about its source when relevant to its interpretation. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
58. Observation.bodySite | |||||
Definition | Indicates the site on the subject's body where the observation was made (i.e. the target site). | ||||
Control | 0..0 | ||||
Binding | For example codes, see SNOMEDCTBodyStructures Codes describing anatomical locations. May include laterality. | ||||
Type | CodeableConcept | ||||
Comments | Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component. If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
59. Observation.method | |||||
Definition | Indicates the mechanism used to perform the observation. | ||||
Control | 0..1 | ||||
Binding | For example codes, see ObservationMethods Methods for simple observations. | ||||
Type | CodeableConcept | ||||
Requirements | In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results. | ||||
Comments | Only used if not implicit in code for Observation.code. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
60. Observation.specimen | |||||
Definition | The specimen that was used when this observation was made. | ||||
Control | 0..1 | ||||
Type | Reference(Specimen) | ||||
Comments | Should only be used if not implicit in code found in | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
61. Observation.device | |||||
Definition | The device used to generate the observation data. | ||||
Control | 0..1 | ||||
Type | Reference(Device | DeviceMetric) | ||||
Comments | Note that this is not meant to represent a device involved in the transmission of the result, e.g., a gateway. Such devices may be documented using the Provenance resource where relevant. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
62. Observation.referenceRange | |||||
Definition | Guidance on how to interpret the value by comparison to a normal or recommended range. Multiple reference ranges are interpreted as an "OR". In other words, to represent two distinct target populations, two | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Requirements | Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts. | ||||
Comments | Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-3: Must have at least a low or a high or text (: low.exists() or high.exists() or text.exists()) | ||||
63. Observation.referenceRange.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
64. Observation.referenceRange.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
65. Observation.referenceRange.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
66. Observation.referenceRange.low | |||||
Definition | The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3). | ||||
Control | 0..1 This element is affected by the following invariants: obs-3 | ||||
Type | Quantity(SimpleQuantity) | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
67. Observation.referenceRange.high | |||||
Definition | The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3). | ||||
Control | 0..1 This element is affected by the following invariants: obs-3 | ||||
Type | Quantity(SimpleQuantity) | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
68. Observation.referenceRange.type | |||||
Definition | Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range. | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from ObservationReferenceRangeMeaningCodes Code for the meaning of a reference range. | ||||
Type | CodeableConcept | ||||
Requirements | Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation. | ||||
Comments | This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
69. Observation.referenceRange.appliesTo | |||||
Definition | Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple | ||||
Control | 0..* | ||||
Binding | For example codes, see ObservationReferenceRangeAppliesToCodes Codes identifying the population the reference range applies to. | ||||
Type | CodeableConcept | ||||
Requirements | Need to be able to identify the target population for proper interpretation. | ||||
Comments | This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
70. Observation.referenceRange.age | |||||
Definition | The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so. | ||||
Control | 0..1 | ||||
Type | Range | ||||
Requirements | Some analytes vary greatly over age. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
71. Observation.referenceRange.text | |||||
Definition | Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of "Negative" or a list or table of "normals". | ||||
Control | 0..1 | ||||
Type | string | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
72. Observation.hasMember | |||||
Definition | This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group. | ||||
Control | 0..* | ||||
Type | Reference(Observation | QuestionnaireResponse | MolecularSequence) | ||||
Comments | When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
73. Observation.derivedFrom | |||||
Definition | The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image. | ||||
Control | 0..* | ||||
Type | Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | Observation | MolecularSequence) | ||||
Comments | All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see Notes below. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
74. Observation.component | |||||
Definition | Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations. | ||||
Control | 0..0 | ||||
Type | BackboneElement | ||||
Requirements | Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation. | ||||
Comments | For a discussion on the ways Observations can be assembled in groups together see Notes below. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |