This resource allows for the definition of various types of plans as a sharable, consumable, and executable artifact. The resource is general enough to support the description of a broad range of clinical and non-clinical artifacts such as clinical decision support rules, order sets, protocols, and drug quality specifications.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. For DomainResources, if more than one implicitRules policy applies, additional policies may be conveyed using the additionalImplicitRules extension.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. Contained resources may be a resource type defined in the FHIR specification, or an additional resource.

The status of the processing for making the artifact publicly available, not necessarily the same as artifact status (Resource.status).

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The status of this plan definition. Enables tracking the life-cycle of the content.

Allows filtering of plan definitions that are appropriate for use versus not.

See guidance around (not) making local changes to elements here.

The lifecycle status of an artifact.

Descriptive topics related to the content of the plan definition. Topics provide a high-level categorization of the definition that can be useful for filtering and searching.

High-level categorization of the definition, used for searching, sorting, and filtering.

Repositories must be able to determine how to categorize the plan definition so that it can be found by topical searches.

An action or group of actions to be taken as part of the plan. For example, in clinical care, an action would be to prescribe a particular indicated medication, or perform a particular test as appropriate. In pharmaceutical quality, an action would be the test that needs to be performed on a drug product as defined in the quality specification or the steps that are planned in a manufacturing process of a drug product or a drug substance.

Note that there is overlap between many of the elements defined here and the ActivityDefinition resource. When an ActivityDefinition is referenced (using the definition element), the overlapping elements in the plan override the content of the referenced ActivityDefinition unless otherwise documented in the specific elements. See the PlanDefinition resource for more detailed information.

Timing in which the characteristic is determined or action is taken.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

This resource allows for the definition of various types of plans as a sharable, consumable, and executable artifact. The resource is general enough to support the description of a broad range of clinical and non-clinical artifacts such as clinical decision support rules, order sets, protocols, and drug quality specifications.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resource id depends on the given use case.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. For DomainResources, if more than one implicitRules policy applies, additional policies may be conveyed using the additionalImplicitRules extension.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

IETF language tag for a human language

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. Contained resources may be a resource type defined in the FHIR specification, or an additional resource.

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

The status of the processing for making the artifact publicly available, not necessarily the same as artifact status (Resource.status).

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

An absolute URI that is used to identify this plan definition when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which an authoritative instance of this plan definition is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the plan definition is stored on different servers.

Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

Allows the plan definition to be referenced by a single globally unique identifier.

A formal identifier that is used to identify this plan definition when it is represented in other formats, or referenced in a specification, model, design or an instance.

Allows externally provided and/or usable business identifiers to be easily associated with the module.

The identifier that is used to identify this version of the plan definition when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the plan definition author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. For more information on versioning knowledge artifacts, refer to the Canonical Resource Management Infrastructure (CRMI) implementation guide artifact versioning discussion (http://hl7.org/fhir/uv/crmi/artifact-lifecycle.html#artifact-versioning).

There may be different plan definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the plan definition with the format [url]|[version]. The version SHOULD NOT contain a '#' - see Business Version.

Indicates the mechanism used to compare versions to determine which is more current.

If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 and a 0 if the version ordering can't be successfully be determined.

A natural language name identifying the plan definition. This name should be usable as an identifier for the module by machine processing applications such as code generation.

The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

Support human navigation and code generation.

A short, descriptive, user-friendly title for the plan definition.

This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

An explanatory or alternate title for the plan definition giving additional information about its content.

A high-level category for the plan definition that distinguishes the kinds of systems that would be interested in the plan definition.

The type of PlanDefinition.

The status of this plan definition. Enables tracking the life-cycle of the content.

Allows filtering of plan definitions that are appropriate for use versus not.

See guidance around (not) making local changes to elements here.

The lifecycle status of an artifact.

A Boolean value to indicate that this plan definition is authored for testing purposes (or education/evaluation/marketing) and no version of this resource will ever be intended for genuine usage.

Allows filtering of plan definitions that are appropriate for use versus not.. Experimental resources might include example instances in implementation guides, instances created solely for testing purposes, etc

Enables experimental content to be developed following the same lifecycle that would be used for a production-level plan definition.

A code, group definition, or canonical reference that describes or identifies the intended subject of the plan definition. Canonical references are allowed to support the definition of protocols for drug and substance quality specifications, and is allowed to reference a MedicinalProductDefinition, SubstanceDefinition, AdministrableProductDefinition, ManufacturedItemDefinition, or PackagedProductDefinition resource.

Note that the choice of canonical for the subject element was introduced in R4B to support pharmaceutical quality use cases. To ensure as much backwards-compatibility as possible, it is recommended to only use the new canonical type with these use cases.

The possible types of subjects for a plan definition (E.g. Patient, Practitioner, Organization, Location, etc.).

The date (and optionally time) when the plan definition was last significantly changed. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the plan definition changes.

The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the plan definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

See guidance around (not) making local changes to elements here.

The name of the organization or individual responsible for the release and ongoing maintenance of the plan definition.

Usually an organization but may be an individual. The publisher (or steward) of the plan definition is the organization or individual primarily responsible for the maintenance and upkeep of the plan definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the plan definition. This item SHOULD be populated unless the information is available from context.

Helps establish the "authority/credibility" of the plan definition. May also allow for contact.

Contact details to assist a user in finding and communicating with the publisher.

May be a web site, an email address, a telephone number, etc.

See guidance around (not) making local changes to elements here.

A free text natural language description of the plan definition from a consumer's perspective.

This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the plan definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the plan definition is presumed to be the predominant language in the place the plan definition was created).

The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate plan definition instances.

When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Assist in searching for appropriate content.

A legal or geographic region in which the authority that maintains the resource is operating. In general, the jurisdiction is also found in the useContext. The useContext may reference additional jurisdictions because the defining jurisdiction does not necessarily limit the jurisdictions of use.

It may be possible for the plan definition to be used in jurisdictions other than those for which it was originally designed or intended.

Countries and regions within which this artifact is targeted for use.

Explanation of why this plan definition is needed and why it has been designed as it has.

This element does not describe the usage of the plan definition. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this plan definition.

A detailed description of how the plan definition is used from a clinical perspective.

A copyright statement relating to the plan definition and/or its contents. Copyright statements are notices of intellectual property ownership and can include restrictions on the use and publishing of the plan definition.

The short copyright declaration (e.g. (c) '2015+ xyz organization') should be sent in the copyrightLabel element without the copyright prefix (i.e., do not include '(c)' or the symbol).

Consumers must be able to determine any legal restrictions on the use of the plan definition and/or its content.

A short string (<50 characters), suitable for inclusion in a page footer that identifies the copyright holder, effective period, and optionally whether rights are restricted. (e.g. 'All rights reserved', 'Some rights reserved').

The copyright symbol and the '(c)' textual representation SHOULD NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.

Defines the content expected to be rendered in all representations of the artifact.

The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.

The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

See guidance around (not) making local changes to elements here.

The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.

If specified, this date follows the original approval date.

See guidance around (not) making local changes to elements here.

Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.

The period during which the plan definition content was or is planned to be in active use.

The effective period for a plan definition determines when the content is applicable for usage and is independent of publication and review dates. For example, a plan definition intended to be used for the year 2016 might be published in 2015.

See guidance around (not) making local changes to elements here.

Allows establishing a transition before a resource comes into effect and also allows for a sunsetting process when new versions of the plan definition are or are expected to be used instead.

Descriptive topics related to the content of the plan definition. Topics provide a high-level categorization of the definition that can be useful for filtering and searching.

High-level categorization of the definition, used for searching, sorting, and filtering.

Repositories must be able to determine how to categorize the plan definition so that it can be found by topical searches.

An individual or organization primarily involved in the creation and maintenance of the content.

An individual or organization primarily responsible for internal coherence of the content.

An individual or organization asserted by the publisher to be primarily responsible for review of some aspect of the content.

See guidance around (not) making local changes to elements here.

An individual or organization asserted by the publisher to be responsible for officially endorsing the content for use in some setting.

See guidance around (not) making local changes to elements here.

Related artifacts such as additional documentation, justification, or bibliographic references.

Each related artifact is either an attachment, or a reference to another resource, but not both. In addition, the successor or predecessor of a PlanDefinition SHOULD be a PlanDefinition, dependencies of a PlanDefinition SHOULD reference a resource, and a PlanDefinition SHOULD NOT have components.

Plan definitions must be able to provide enough information for consumers of the content (and/or interventions or results produced by the content) to be able to determine and understand the justification for and evidence in support of the content.

A reference to a Library resource containing any formal logic used by the plan definition.

A goal describes an expected outcome that activities within the plan are intended to achieve. For example, weight loss, restoring an activity of daily living, obtaining herd immunity via immunization, meeting a process improvement objective, meeting the acceptance criteria for a test as specified by a quality specification, etc.

Goal information needs to be captured for order sets, protocols, and care plan definitions to better describe the objectives of the protocol activities and to guide the creation of specific goals within the derived care plans and orders.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Indicates a category the goal falls within.

Example codes for grouping goals for filtering or presentation.

Human-readable and/or coded description of a specific desired objective of care, such as "control blood pressure" or "negotiate an obstacle course" or "dance with child at wedding".

If no code is available, use CodeableConcept.text.

Describes goals that can be achieved.

Identifies the expected level of importance associated with reaching/sustaining the defined goal.

Indicates the level of importance associated with reaching or sustaining a goal.

The event after which the goal should begin being pursued.

Identifies the types of events that might trigger the start of a goal.

Identifies problems, conditions, issues, or concerns the goal is intended to address.

Identifies problems, conditions, issues, or concerns that goals may address.

Didactic or other informational resources associated with the goal that provide further supporting information about the goal. Information resources can include inline text commentary and links to web resources.

Indicates what should be done and within what timeframe.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The parameter whose value is to be tracked, e.g. body weight, blood pressure, or hemoglobin A1c level.

Identifies types of parameters that can be tracked to determine goal achievement.

The target value of the measure to be achieved to signify fulfillment of the goal, e.g. 150 pounds or 7.0%, or in the case of pharmaceutical quality - NMT 0.6%, Clear solution, etc. Either the high or low or both values of the range can be specified. When a low value is missing, it indicates that the goal is achieved at any value at or below the high value. Similarly, if the high value is missing, it indicates that the goal is achieved at any value at or above the low value.

A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the goal.target.measure defines a coded value.

Indicates the timeframe after the start of the goal in which the goal should be met.

Actors represent the individuals or groups involved in the execution of the defined set of activities.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A descriptive label for the actor.

A description of how the actor fits into the overall actions of the plan definition.

The characteristics of the candidates that could serve as the actor.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The type of participant in the action.

The type of participant in the activity.

The type of participant in the action.

The type of participant in the action.

When this element is a reference, it SHOULD be a reference to a definitional resource (for example, a location type, rather than a specific location). Note that specimen as a participant in cell-line research is acceptable, but specimen in clinical research would typically be represented as the focus rather the subject.

The role the participant should play in performing the described action.

An action or group of actions to be taken as part of the plan. For example, in clinical care, an action would be to prescribe a particular indicated medication, or perform a particular test as appropriate. In pharmaceutical quality, an action would be the test that needs to be performed on a drug product as defined in the quality specification or the steps that are planned in a manufacturing process of a drug product or a drug substance.

Note that there is overlap between many of the elements defined here and the ActivityDefinition resource. When an ActivityDefinition is referenced (using the definition element), the overlapping elements in the plan override the content of the referenced ActivityDefinition unless otherwise documented in the specific elements. See the PlanDefinition resource for more detailed information.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Timing in which the characteristic is determined or action is taken.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

An identifier that is unique within the PlanDefinition to allow linkage within the realized CarePlan and/or RequestOrchestration.

A user-visible prefix for the action. For example a section or item numbering such as 1. or A.

The textual description of the action displayed to a user. For example, when the action is a test to be performed, the title would be the title of the test such as Assay by HPLC.

A brief description of the action used to provide a summary to display to the user.

A text equivalent of the action to be performed. This provides a human-interpretable description of the action when the definition is consumed by a system that might not be capable of interpreting it dynamically.

Indicates how quickly the action should be addressed with respect to other actions.

Identifies the level of importance to be assigned to actioning the request.

A code that provides a meaning, grouping, or classification for the action or action group. For example, a section may have a LOINC code for the section of a documentation template. In pharmaceutical quality, an action (Test) such as pH could be classified as a physical property.

Provides examples of actions to be performed.

A description of why this action is necessary or appropriate.

This is different than the clinical evidence documentation, it's an actual business description of the reason for performing the action.

Provides examples of reasons for actions to be performed.

Didactic or other informational resources associated with the action that can be provided to the CDS recipient. Information resources can include inline text commentary and links to web resources.

Identifies goals that this action supports. The reference must be to a goal element defined within this plan definition. In pharmaceutical quality, a goal represents acceptance criteria (Goal) for a given action (Test), so the goalId would be the unique id of a defined goal element establishing the acceptance criteria for the action.

A code, group definition, or canonical reference that describes the intended subject of the action and its children, if any. Canonical references are allowed to support the definition of protocols for drug and substance quality specifications, and is allowed to reference a MedicinalProductDefinition, SubstanceDefinition, AdministrableProductDefinition, ManufacturedItemDefinition, or PackagedProductDefinition resource.

The subject of an action overrides the subject at a parent action or on the root of the PlanDefinition if specified.

In addition, because the subject needs to be resolved during realization, use of subjects in actions (or in the ActivityDefinition referenced by the action) resolves based on the set of subjects supplied in context and by type (i.e. the patient subject would resolve to a resource of type Patient).

The possible types of subjects for a plan definition (E.g. Patient, Practitioner, Organization, Location, etc.).

Multiple steps in a protocol often have different groups of steps that are focused on testing different things. The subject of an action specifies the focus of the action and any child actions.

A description of when the action should be triggered. When multiple triggers are specified on an action, any triggering event invokes the action.

An expression that describes applicability criteria or start/stop conditions for the action.

If no applicability conditions are present, the action is considered applicable (i.e. it should be performed). When multiple conditions of the same kind are present, the effects are combined using AND semantics, so the overall condition is true only if all the conditions are true. Conditions of different kinds are always considered separately (e.g. applicability and start criteria are never considered together)

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The kind of condition.

Applicability criteria are used to determine immediate applicability when a plan definition is applied to a given context. Start and stop criteria are carried through application and used to describe enter/exit criteria for an action.

Defines the kinds of conditions that can appear on actions.

An expression that returns true or false, indicating whether the condition is satisfied.

The expression may be inlined or may be a reference to a named expression within a logic library referenced by the library element.

Defines input data requirements for the action.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A human-readable label for the data requirement used to label data flows in BPMN or similar diagrams. Also provides a human readable label when rendering the data requirement that conveys its purpose to human readers.

Defines the data that is to be provided as input to the action.

Points to an existing input or output element that provides data to this input.

The relatedData element allows indicating that an input to a parent action is an input to specific child actions. It also allows the output of one action to be identified as the input to a different action

Defines the outputs of the action, if any.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A human-readable label for the data requirement used to label data flows in BPMN or similar diagrams. Also provides a human readable label when rendering the data requirement that conveys its purpose to human readers.

Defines the data that results as output from the action.

Points to an existing input or output element that is results as output from the action.

The relatedData element allows indicating that the output of child action is also the output of a parent action. It also allows the input of one action to be identified as the output of a different action

A relationship to another action such as "before" or "30-60 minutes after start of".

When an action depends on multiple actions, the meaning is that all actions are dependencies, rather than that any of the actions are a dependency.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The element id of the target related action.

The relationship of the start of this action to the related action.

Defines the types of relationships between actions.

The relationship of the end of this action to the related action.

Defines the types of relationships between actions.

A duration or range of durations to apply to the relationship. For example, 30-60 minutes before.

An optional value describing when the action should be performed.

The intent of the timing element is to provide timing when the action should be performed. As a definitional resource, this timing is interpreted as part of an apply operation so that the timing of the result actions in a CarePlan or RequestOrchestration, for example, would be specified by evaluating the timing definition in the context of the apply and setting the resulting timing on the appropriate elements of the target resource. If the timing is an Age, the activity is expected to be performed when the subject is the given Age. When the timing is a Duration, the activity is expected to be performed within the specified duration from the apply. When the timing is a Range, it may be a range of Ages or Durations, providing a range for the expected timing of the resulting activity. When the timing is a Timing, it is establishing a schedule for the timing of the resulting activity.

Allows prompting for activities and detection of missed planned activities.

Identifies the facility where the action will occur; e.g. home, hospital, specific clinic, etc.

May reference a specific clinical location or may just identify a type of location.

Helps in planning of activity.

Indicates who should participate in performing the action described.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A reference to the id element of the actor who will participate in this action.

The type of participant in the action.

The type of participant in the activity.

The type of participant in the action.

The type of participant in the action.

When this element is a reference, it SHOULD be a reference to a definitional resource (for example, a location type, rather than a specific location). Note that specimen as a participant in cell-line research is acceptable, but specimen in clinical research would typically be represented as the focus rather the subject.

The role the participant should play in performing the described action.

Defines roles played by participants for the action.

Indicates how the actor will be involved in the action - author, reviewer, witness, etc.

The type of action to perform (create, update, remove).

The type of action to be performed.

All - meaning the applicability of each child action is evaluated independently; if a child action is applicable according to the applicability criteria, it is applied. Any - meaning that each child action is evaluated in order, and the first action that returns an applicability of true will be applied, and processing of the parent action will stop. If not specified, the default behavior of All is used.

Defines applicability behavior of a group.

Defines the grouping behavior for the action and its children.

Defines organization behavior of a group.

Defines the selection behavior for the action and its children.

Defines selection behavior of a group.

Defines the required behavior for the action.

Defines expectations around whether an action or action group is required.

Defines whether the action should usually be preselected.

Defines selection frequency behavior for an action or group.

Defines whether the action can be selected multiple times.

Defines behavior for an action or a group for how many times that item may be repeated.

A reference to an ActivityDefinition that describes the action to be taken in detail, a Measure defining a measure to be evaluated, a MessageDefinition describing a message to be sent, a PlanDefinition that describes a series of actions to be taken, a Questionnaire that should be filled out, a SpecimenDefinition describing a specimen to be collected, an ObservationDefinition that specifies what observation should be captured, or an OperationDefinition that specifies what operation should be invoked. When the value is a uri, it is intended to be a reference to non-FHIR content that characterizes the action to be performed. This option is allowed to enable the PlanDefinition to be used to provide semi-structured representation, when the guidance is not computable, but there is still value in elaborating the overall structure with a PlanDefinition. The intended behavior when a definitionUri is realized as part of an apply is that it is copied to the resulting RequestOrchestration so that it is available to the consuming system. How that system interprets that uri is not specified.

Note that the definition is optional, and if no definition is specified, a dynamicValue with a root ($this) path can be used to define the entire resource dynamically. If the reference is to an ActivityDefinition or a PlanDefinition, the realization processing documented in those resources is followed. For the other definitional resource types, implementations SHOULD realize the action as a Task resource with a focus of the definitional resource to indicate that the activity should be carried out (e.g. evaluating a measure, gathering a specimen, filling out a questionnaire, sending a message, invoking an operation, etc.).

A reference to a StructureMap resource that defines a transform that can be executed to produce the intent resource using the ActivityDefinition instance as the input.

Note that when a referenced ActivityDefinition also defines a transform, the transform specified here generally takes precedence. In addition, if both a transform and dynamic values are specific, the dynamic values are applied to the result of the transform.

Customizations that should be applied to the statically defined resource. For example, if the dosage of a medication must be computed based on the patient's weight, a customization would be used to specify an expression that calculated the weight, and the path on the resource that would contain the result.

Dynamic values are applied in the order in which they are defined in the PlanDefinition resource. Note that when dynamic values are also specified by a referenced ActivityDefinition, the dynamicValues from the ActivityDefinition are applied first, followed by the dynamicValues specified here. In addition, if both a transform and dynamic values are specific, the dynamic values are applied to the result of the transform.