Evidence Based Medicine on FHIR Implementation Guide
1.0.0-ballot3 - STU 1 Ballot 3 World

Evidence Based Medicine on FHIR Implementation Guide, published by HL7 International / Clinical Decision Support. This guide is not an authorized publication; it is the continuous build for version 1.0.0-ballot3 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/ebm/ and changes regularly. See the Directory of published versions

Resource Profile: Comment - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 1

Definitions for the comment resource profile

Guidance on how to interpret the contents of this table can be foundhere

0. ArtifactAssessment
Definition

This Resource provides one or more comments, classifiers or ratings about a Resource and supports attribution and rights management metadata for the added content.

ShortAdds metadata-supported comments, classifiers or ratings related to a Resource
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id.trace('id') in %resource.descendants().select(reference | as(uri))) or descendants().where(reference='#' | as(uri)='#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. ArtifactAssessment.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. For DomainResources, if more than one implicitRules policy applies, additional policies may be conveyed using the additionalImplicitRules extension.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. ArtifactAssessment.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. Contained resources may be a resource type defined in the FHIR specification, or an additional resource.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. ArtifactAssessment.extension:url
Slice Nameurl
Definition

An absolute URI that is used to identify this artifact when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which an authoritative instance of this artifact is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the artifact is stored on different servers.

ShortCanonical identifier for this artifact, represented as a URI (globally unique)
Comments

Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

Control0..1
TypeExtension(Artifact URL) (Extension Type: uri)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. ArtifactAssessment.extension:description
Slice Namedescription
Definition

A free text natural language description of the artifact from a consumer's perspective.

ShortNatural language description of the artifact
Comments

This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the artifact as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the artifact is presumed to be the predominant language in the place the artifact was created).

Control0..1
TypeExtension(Artifact Description) (Extension Type: markdown)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. ArtifactAssessment.extension:author
Slice Nameauthor
Definition

An individual or organization primarily involved in the creation and maintenance of the artifact.

ShortWho authored the artifact
Control0..*
TypeExtension(Artifact Author) (Extension Type: ContactDetail)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. ArtifactAssessment.extension:publicationStatus
Slice NamepublicationStatus
Definition

The status of the processing for making the artifact publicly available, not necessarily the same as artifact status (Resource.status).

ShortPublication status
Control0..1
TypeExtension(ArtifactPublicationStatus) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. ArtifactAssessment.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on ArtifactAssessment.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 16. ArtifactAssessment.identifier
    Definition

    A formal identifier that is used to identify this Comment when it is represented in other formats, or referenced in a specification, model, design or an instance.


    A formal identifier that is used to identify this artifact assessment when it is represented in other formats, or referenced in a specification, model, design or an instance.

    ShortAdditional identifier for the CommentAdditional identifier for the artifact assessment
    Comments

    Typically, this is used for identifiers that can be used in systems outside of FHIR, where it is not sufficient to use the logical URI.


    This may be used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this artifact assessment outside of FHIR, where it is not possible to use the logical URI.

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    Allows externally provided and/or usable business identifiers to be easily associated with the Comment.


    Allows externally provided and/or usable business identifiers to be easily associated with the artifact assessment.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. ArtifactAssessment.citeAs
    Definition

    Display of or reference to the bibliographic citation of the Comment.


    Display of the bibliographic citation of the comment, classifier, or rating.

    ShortHow to cite the CommentHow to cite the comment or rating
    Control0..1
    Typemarkdown
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. ArtifactAssessment.artifact[x]
    Definition

    A reference to a resource, canonical resource, or non-FHIR resource which the Comment is about.


    A reference to a resource, canonical resource, or non-FHIR resource which the comment or assessment is about.

    ShortThe artifact that is commented uponThe artifact assessed, commented upon or rated
    Control1..1
    TypeChoice of: Reference(Resource), canonical, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. ArtifactAssessment.date
    Definition

    The date (and optionally time) when the Comment was published. The date should change when the substantive content of the Comment changes.


    The date (and optionally time) when the artifact assessment was published. The date must change when the disposition changes and it must change if the workflow status code changes. In addition, it should change when the substantive content of the artifact assessment changes.

    ShortDate last changed
    Comments

    The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the artifact assessment. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

    Control0..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Alternate NamesRevision Date
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. ArtifactAssessment.copyright
    Definition

    A copyright statement relating to the Comment and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the Comment.


    A copyright statement relating to the artifact assessment and/or its contents. Copyright statements are notices of intellectual property ownership and can include restrictions on the use and publishing of the artifact assessment.

    ShortNotice about intellectual property ownership, can include restrictions on use
    Control0..1
    Typemarkdown
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summaryfalse
    Requirements

    Consumers must be able to determine any legal restrictions on the use of the Comment and/or its content.


    Consumers must be able to determine any legal restrictions on the use of the artifact assessment and/or its content.

    Alternate NamesLicense, Restrictions
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. ArtifactAssessment.approvalDate
    Definition

    The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.

    ShortWhen the Comment was approved by publisherWhen the artifact assessment was approved by publisher
    Comments

    The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

    Control0..1
    Typedate
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. ArtifactAssessment.lastReviewDate
    Definition

    The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.

    ShortWhen the Comment was last reviewedWhen the artifact assessment was last reviewed by the publisher
    Comments

    If specified, this date follows the original approval date.

    Control0..1
    Typedate
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. ArtifactAssessment.content
    Definition

    A comment about the artifact.


    A component comment, classifier, or rating of the artifact.

    ShortA commentComment, classifier, or rating content
    Control10..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children or both (hasValue() or (children().count() > id.count()))
    32. ArtifactAssessment.content.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on ArtifactAssessment.content.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 34. ArtifactAssessment.content.freeToShare
      Definition

      Acceptable to publicly share the Comment content, specific to the associated content instance


      Acceptable to publicly share the comment, classifier or rating.

      ShortAcceptable to publicly share the Comment contentAcceptable to publicly share the content
      Comments

      Absence of a value should be interpreted as inheriting any freeToShare value present in a containing structure, else inheriting data from the ArtifactAssessment.copyright element, else value unknown.

      Control0..1
      Typeboolean
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. ArtifactAssessment.workflowStatus
      Definition

      Indicates the workflow status of the comment or change request.

      Shortsubmitted | triaged | waiting-for-input | resolved-no-change | resolved-change-required | deferred | duplicate | applied | published | entered-in-error
      Control0..01
      BindingThe codes SHALL be taken from ArtifactAssessmentWorkflowStatushttp://hl7.org/fhir/ValueSet/artifactassessment-workflow-status|6.0.0-ballot5
      (required to http://hl7.org/fhir/ValueSet/artifactassessment-workflow-status|6.0.0-ballot5)
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. ArtifactAssessment.disposition
      Definition

      Indicates the disposition of the responsible party to the comment or change request.

      Shortunresolved | not-persuasive | persuasive | persuasive-with-modification | not-persuasive-with-modification
      Control0..01
      BindingThe codes SHALL be taken from ArtifactAssessmentDispositionhttp://hl7.org/fhir/ValueSet/artifactassessment-disposition|6.0.0-ballot5
      (required to http://hl7.org/fhir/ValueSet/artifactassessment-disposition|6.0.0-ballot5)
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be foundhere

      0. ArtifactAssessment
      2. ArtifactAssessment.extension:url
      Slice Nameurl
      Control0..1
      TypeExtension(Artifact URL) (Extension Type: uri)
      4. ArtifactAssessment.extension:description
      Slice Namedescription
      Control0..1
      TypeExtension(Artifact Description) (Extension Type: markdown)
      6. ArtifactAssessment.extension:author
      Slice Nameauthor
      Control0..*
      TypeExtension(Artifact Author) (Extension Type: ContactDetail)
      8. ArtifactAssessment.extension:publicationStatus
      Slice NamepublicationStatus
      Control0..1
      TypeExtension(ArtifactPublicationStatus) (Extension Type: CodeableConcept)
      10. ArtifactAssessment.identifier
      Definition

      A formal identifier that is used to identify this Comment when it is represented in other formats, or referenced in a specification, model, design or an instance.

      ShortAdditional identifier for the Comment
      Comments

      Typically, this is used for identifiers that can be used in systems outside of FHIR, where it is not sufficient to use the logical URI.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Requirements

      Allows externally provided and/or usable business identifiers to be easily associated with the Comment.

      12. ArtifactAssessment.citeAs
      Definition

      Display of or reference to the bibliographic citation of the Comment.

      ShortHow to cite the Comment
      14. ArtifactAssessment.artifact[x]
      Definition

      A reference to a resource, canonical resource, or non-FHIR resource which the Comment is about.

      ShortThe artifact that is commented upon
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      16. ArtifactAssessment.date
      Definition

      The date (and optionally time) when the Comment was published. The date should change when the substantive content of the Comment changes.

      18. ArtifactAssessment.copyright
      Definition

      A copyright statement relating to the Comment and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the Comment.

      Requirements

      Consumers must be able to determine any legal restrictions on the use of the Comment and/or its content.

      20. ArtifactAssessment.approvalDate
      ShortWhen the Comment was approved by publisher
      22. ArtifactAssessment.lastReviewDate
      ShortWhen the Comment was last reviewed
      24. ArtifactAssessment.content
      Definition

      A comment about the artifact.

      ShortA comment
      Control1..?
      26. ArtifactAssessment.content.freeToShare
      Definition

      Acceptable to publicly share the Comment content, specific to the associated content instance

      ShortAcceptable to publicly share the Comment content
      28. ArtifactAssessment.workflowStatus
      Control0..0
      30. ArtifactAssessment.disposition
      Control0..0

      Guidance on how to interpret the contents of this table can be foundhere

      0. ArtifactAssessment
      Definition

      This Resource provides one or more comments, classifiers or ratings about a Resource and supports attribution and rights management metadata for the added content.

      ShortAdds metadata-supported comments, classifiers or ratings related to a Resource
      Control0..*
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id.trace('id') in %resource.descendants().select(reference | as(uri))) or descendants().where(reference='#' | as(uri)='#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. ArtifactAssessment.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resource id depends on the given use case.

      Control0..1
      Typeid
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      4. ArtifactAssessment.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. ArtifactAssessment.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. For DomainResources, if more than one implicitRules policy applies, additional policies may be conveyed using the additionalImplicitRules extension.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. ArtifactAssessment.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHALL be taken from AllLanguages
      (required to http://hl7.org/fhir/ValueSet/all-languages|6.0.0-ballot5)

      IETF language tag for a human language

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. ArtifactAssessment.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      This element is affected by the following invariants: dom-6
      TypeNarrative
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. ArtifactAssessment.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. Contained resources may be a resource type defined in the FHIR specification, or an additional resource.

      Control0..*
      This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
      TypeResource
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. ArtifactAssessment.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on ArtifactAssessment.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. ArtifactAssessment.extension:url
        Slice Nameurl
        Definition

        An absolute URI that is used to identify this artifact when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which an authoritative instance of this artifact is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the artifact is stored on different servers.

        ShortCanonical identifier for this artifact, represented as a URI (globally unique)
        Comments

        Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

        The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

        In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

        Control0..1
        TypeExtension(Artifact URL) (Extension Type: uri)
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. ArtifactAssessment.extension:description
        Slice Namedescription
        Definition

        A free text natural language description of the artifact from a consumer's perspective.

        ShortNatural language description of the artifact
        Comments

        This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the artifact as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the artifact is presumed to be the predominant language in the place the artifact was created).

        Control0..1
        TypeExtension(Artifact Description) (Extension Type: markdown)
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. ArtifactAssessment.extension:author
        Slice Nameauthor
        Definition

        An individual or organization primarily involved in the creation and maintenance of the artifact.

        ShortWho authored the artifact
        Control0..*
        TypeExtension(Artifact Author) (Extension Type: ContactDetail)
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. ArtifactAssessment.extension:publicationStatus
        Slice NamepublicationStatus
        Definition

        The status of the processing for making the artifact publicly available, not necessarily the same as artifact status (Resource.status).

        ShortPublication status
        Control0..1
        TypeExtension(ArtifactPublicationStatus) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. ArtifactAssessment.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Must Supportfalse
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on ArtifactAssessment.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 26. ArtifactAssessment.identifier
          Definition

          A formal identifier that is used to identify this Comment when it is represented in other formats, or referenced in a specification, model, design or an instance.

          ShortAdditional identifier for the Comment
          Comments

          Typically, this is used for identifiers that can be used in systems outside of FHIR, where it is not sufficient to use the logical URI.

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          Allows externally provided and/or usable business identifiers to be easily associated with the Comment.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          28. ArtifactAssessment.title
          Definition

          A label for use in displaying and selecting the artifact assessment.

          ShortA label for use in displaying and selecting the artifact assessment
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          30. ArtifactAssessment.citeAs
          Definition

          Display of or reference to the bibliographic citation of the Comment.

          ShortHow to cite the Comment
          Control0..1
          Typemarkdown
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          32. ArtifactAssessment.artifact[x]
          Definition

          A reference to a resource, canonical resource, or non-FHIR resource which the Comment is about.

          ShortThe artifact that is commented upon
          Control1..1
          TypeChoice of: Reference(Resource), canonical, uri
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          34. ArtifactAssessment.relatesTo
          Definition

          Relationship that this ArtifactAssessment has with other FHIR or non-FHIR resources that already exist.

          ShortRelationship to other Resources
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children or both (hasValue() or (children().count() > id.count()))
          36. ArtifactAssessment.relatesTo.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          38. ArtifactAssessment.relatesTo.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on ArtifactAssessment.relatesTo.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 40. ArtifactAssessment.relatesTo.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on ArtifactAssessment.relatesTo.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 42. ArtifactAssessment.relatesTo.type
              Definition

              The type of relationship to the related artifact.

              Shortdocumentation | justification | citation | predecessor | successor | derived-from | depends-on | composed-of | part-of | amends | amended-with | appends | appended-with | cites | cited-by | comments-on | comment-in | contains | contained-in | corrects | correction-in | replaces | replaced-with | retracts | retracted-by | signs | similar-to | supports | supported-with | transforms | transformed-into | transformed-with | documents | specification-of | created-with | cite-as | reprint | reprint-of | summarizes
              Control1..1
              BindingUnless not suitable, these codes SHALL be taken from Artifact Relationship Type
              (extensible to http://terminology.hl7.org/ValueSet/artifact-relationship-type)

              The type of relationship to the related artifact.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. ArtifactAssessment.relatesTo.target[x]
              Definition

              The artifact that is related to this ArtifactAssessment Resource.

              ShortThe artifact that is related to this ArtifactAssessment
              Control1..1
              TypeChoice of: uri, Attachment, canonical(Resource), Reference(Resource), markdown
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. ArtifactAssessment.date
              Definition

              The date (and optionally time) when the Comment was published. The date should change when the substantive content of the Comment changes.

              ShortDate last changed
              Comments

              The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the artifact assessment. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

              Control0..1
              TypedateTime
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Alternate NamesRevision Date
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              48. ArtifactAssessment.copyright
              Definition

              A copyright statement relating to the Comment and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the Comment.

              ShortNotice about intellectual property ownership, can include restrictions on use
              Control0..1
              Typemarkdown
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Requirements

              Consumers must be able to determine any legal restrictions on the use of the Comment and/or its content.

              Alternate NamesLicense, Restrictions
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              50. ArtifactAssessment.approvalDate
              Definition

              The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.

              ShortWhen the Comment was approved by publisher
              Comments

              The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

              Control0..1
              Typedate
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              52. ArtifactAssessment.lastReviewDate
              Definition

              The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.

              ShortWhen the Comment was last reviewed
              Comments

              If specified, this date follows the original approval date.

              Control0..1
              Typedate
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Requirements

              Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. ArtifactAssessment.content
              Definition

              A comment about the artifact.

              ShortA comment
              Control1..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children or both (hasValue() or (children().count() > id.count()))
              56. ArtifactAssessment.content.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              This element is affected by the following invariants: ele-1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              58. ArtifactAssessment.content.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on ArtifactAssessment.content.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 60. ArtifactAssessment.content.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on ArtifactAssessment.content.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 62. ArtifactAssessment.content.summary
                  Definition

                  A brief summary of the content of this component.

                  ShortBrief summary of the content
                  Control0..1
                  Typemarkdown
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  64. ArtifactAssessment.content.type
                  Definition

                  Indicates what type of content this component represents.

                  ShortWhat type of content
                  Control0..1
                  BindingFor example codes, see Evidence Certainty Type
                  (example to http://terminology.hl7.org/ValueSet/certainty-type)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  66. ArtifactAssessment.content.classifier
                  Definition

                  Represents a rating, classifier, or assessment of the artifact.

                  ShortRating, classifier, or assessment
                  Control0..*
                  BindingFor example codes, see StatisticCertaintyRating
                  (example to http://terminology.hl7.org/ValueSet/certainty-rating)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  68. ArtifactAssessment.content.quantity
                  Definition

                  A quantitative rating of the artifact.

                  ShortQuantitative rating
                  Control0..1
                  TypeQuantity
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  70. ArtifactAssessment.content.author
                  Definition

                  Indicates who or what authored the content.

                  ShortWho authored the content
                  Control0..*
                  TypeReference(Patient, Practitioner, PractitionerRole, Organization, Device)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  72. ArtifactAssessment.content.path
                  Definition

                  A URI that points to what the comment is about, such as a line of text in the CQL, or a specific element in a resource.

                  ShortWhat the comment is directed to
                  Comments

                  The target element is used to point the comment to aspect of the artifact, such as a text range within a CQL library (e.g. #content?0:0-120:80).

                  Control0..*
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  74. ArtifactAssessment.content.relatesTo
                  Definition

                  Relationship that this content component has with other FHIR or non-FHIR resources that already exist.

                  ShortRelationship to other Resources
                  Control0..*
                  TypeSeettp://hl7.org/fhir/StructureDefinition/ArtifactAssessment#ArtifactAssessment.relatesTo
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  76. ArtifactAssessment.content.freeToShare
                  Definition

                  Acceptable to publicly share the Comment content, specific to the associated content instance

                  ShortAcceptable to publicly share the Comment content
                  Comments

                  Absence of a value should be interpreted as inheriting any freeToShare value present in a containing structure, else inheriting data from the ArtifactAssessment.copyright element, else value unknown.

                  Control0..1
                  Typeboolean
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  78. ArtifactAssessment.content.component
                  Definition

                  A component comment, classifier, or rating of the artifact.

                  ShortComment, classifier, or rating content
                  Control0..*
                  TypeSeettp://hl7.org/fhir/StructureDefinition/ArtifactAssessment#ArtifactAssessment.content
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  80. ArtifactAssessment.workflowStatus
                  Definition

                  Indicates the workflow status of the comment or change request.

                  Shortsubmitted | triaged | waiting-for-input | resolved-no-change | resolved-change-required | deferred | duplicate | applied | published | entered-in-error
                  Control0..0
                  BindingThe codes SHALL be taken from ArtifactAssessmentWorkflowStatus
                  (required to http://hl7.org/fhir/ValueSet/artifactassessment-workflow-status|6.0.0-ballot5)
                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  82. ArtifactAssessment.disposition
                  Definition

                  Indicates the disposition of the responsible party to the comment or change request.

                  Shortunresolved | not-persuasive | persuasive | persuasive-with-modification | not-persuasive-with-modification
                  Control0..0
                  BindingThe codes SHALL be taken from ArtifactAssessmentDisposition
                  (required to http://hl7.org/fhir/ValueSet/artifactassessment-disposition|6.0.0-ballot5)
                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))