Da Vinci PDex Plan Net
1.2.0 - STU 2 (ci-build)
Da Vinci PDex Plan Net
1.2.0 - STU 2 (ci-build)
Da Vinci PDex Plan Net, published by HL7 International / Financial Management. This guide is not an authorized publication; it is the continuous build for version 1.2.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/davinci-pdex-plan-net/ and changes regularly. See the Directory of published versions
| Page standards status: Trial-use |
Definitions for the qualification extension.
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | An extension to add qualifications for an organization (e.g. accreditation) or practitionerRole (e.g. registered to prescribe controlled substances). |
| Short | Qualification |
| 2. Extension.extension | |
| Control | 2..? |
| 4. Extension.extension:identifier | |
| Slice Name | identifier |
| Control | 0..* |
| Must Support | true |
| 6. Extension.extension:identifier.extension | |
| Control | 0..0 |
| 8. Extension.extension:identifier.url | |
| Fixed Value | identifier |
| 10. Extension.extension:identifier.value[x] | |
| Control | 1..? |
| Type | Identifier |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 12. Extension.extension:code | |
| Slice Name | code |
| Control | 1..1 |
| Must Support | true |
| 14. Extension.extension:code.extension | |
| Control | 0..0 |
| 16. Extension.extension:code.url | |
| Fixed Value | code |
| 18. Extension.extension:code.value[x] | |
| Control | 1..? |
| Binding | Unless not suitable, these codes SHALL be taken from Specialties, Degrees, Licenses, and Certificates VS (extensible to http://hl7.org/fhir/us/davinci-pdex-plan-net/ValueSet/SpecialtyAndDegreeLicenseCertificateVS) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 20. Extension.extension:issuer | |
| Slice Name | issuer |
| Control | 0..1 |
| Must Support | true |
| 22. Extension.extension:issuer.extension | |
| Control | 0..0 |
| 24. Extension.extension:issuer.url | |
| Fixed Value | issuer |
| 26. Extension.extension:issuer.value[x] | |
| Control | 1..? |
| Type | Reference(Plan-Net Organization) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 28. Extension.extension:status | |
| Slice Name | status |
| Control | 1..1 |
| Must Support | true |
| 30. Extension.extension:status.extension | |
| Control | 0..0 |
| 32. Extension.extension:status.url | |
| Fixed Value | status |
| 34. Extension.extension:status.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from Qualification Status VS (required to http://hl7.org/fhir/us/davinci-pdex-plan-net/ValueSet/QualificationStatusVS) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Fixed Value | active |
| 36. Extension.extension:period | |
| Slice Name | period |
| Control | 0..1 |
| Must Support | true |
| 38. Extension.extension:period.extension | |
| Control | 0..0 |
| 40. Extension.extension:period.url | |
| Fixed Value | period |
| 42. Extension.extension:period.value[x] | |
| Control | 1..? |
| Type | Period |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 44. Extension.extension:whereValid | |
| Slice Name | whereValid |
| Control | 0..* |
| Must Support | true |
| 46. Extension.extension:whereValid.extension | |
| Control | 0..0 |
| 48. Extension.extension:whereValid.url | |
| Fixed Value | whereValid |
| 50. Extension.extension:whereValid.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from USPS Two Letter Alphabetic Codes (required to http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state) |
| Type | Choice of: CodeableConcept, Reference(Plan-Net Location) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 52. Extension.url | |
| Fixed Value | http://hl7.org/fhir/us/davinci-pdex-plan-net/StructureDefinition/qualification |
| 54. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | An extension to add qualifications for an organization (e.g. accreditation) or practitionerRole (e.g. registered to prescribe controlled substances). Optional Extension Element - found in all resources. |
| Short | QualificationOptional Extensions Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 20..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:identifier | |
| Slice Name | identifier |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:identifier.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 8. Extension.extension:identifier.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | identifier |
| 10. Extension.extension:identifier.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | Identifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 12. Extension.extension:code | |
| Slice Name | code |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 14. Extension.extension:code.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 16. Extension.extension:code.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | code |
| 18. Extension.extension:code.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | Unless not suitable, these codes SHALL be taken from For codes, see Specialties, Degrees, Licenses, and Certificates VS (extensible to http://hl7.org/fhir/us/davinci-pdex-plan-net/ValueSet/SpecialtyAndDegreeLicenseCertificateVS) |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Extension.extension:issuer | |
| Slice Name | issuer |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 22. Extension.extension:issuer.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 24. Extension.extension:issuer.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | issuer |
| 26. Extension.extension:issuer.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | Reference(Plan-Net Organization), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Extension.extension:status | |
| Slice Name | status |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 30. Extension.extension:status.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:status.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | status |
| 34. Extension.extension:status.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see Qualification Status VS (required to http://hl7.org/fhir/us/davinci-pdex-plan-net/ValueSet/QualificationStatusVS) |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Fixed Value | active |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:period | |
| Slice Name | period |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 38. Extension.extension:period.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 40. Extension.extension:period.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | period |
| 42. Extension.extension:period.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | Period, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 44. Extension.extension:whereValid | |
| Slice Name | whereValid |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 46. Extension.extension:whereValid.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 48. Extension.extension:whereValid.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | whereValid |
| 50. Extension.extension:whereValid.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see USPS Two Letter Alphabetic Codes (required to http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state) |
| Type | Choice of: CodeableConcept, Reference(Plan-Net Location), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 52. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/us/davinci-pdex-plan-net/StructureDefinition/qualification |
| 54. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | An extension to add qualifications for an organization (e.g. accreditation) or practitionerRole (e.g. registered to prescribe controlled substances). |
| Short | Qualification |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 2..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:identifier | |
| Slice Name | identifier |
| Definition | An Extension |
| Short | Extension |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:identifier.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:identifier.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:identifier.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | identifier |
| 14. Extension.extension:identifier.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | Identifier |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:code | |
| Slice Name | code |
| Definition | An Extension |
| Short | Extension |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:code.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:code.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:code.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | code |
| 24. Extension.extension:code.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | Unless not suitable, these codes SHALL be taken from Specialties, Degrees, Licenses, and Certificates VS (extensible to http://hl7.org/fhir/us/davinci-pdex-plan-net/ValueSet/SpecialtyAndDegreeLicenseCertificateVS) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:issuer | |
| Slice Name | issuer |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 28. Extension.extension:issuer.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 30. Extension.extension:issuer.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:issuer.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | issuer |
| 34. Extension.extension:issuer.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | Reference(Plan-Net Organization) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:status | |
| Slice Name | status |
| Definition | An Extension |
| Short | Extension |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 38. Extension.extension:status.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 40. Extension.extension:status.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:status.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | status |
| 44. Extension.extension:status.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Qualification Status VS (required to http://hl7.org/fhir/us/davinci-pdex-plan-net/ValueSet/QualificationStatusVS) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Fixed Value | active |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:period | |
| Slice Name | period |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 48. Extension.extension:period.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 50. Extension.extension:period.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 52. Extension.extension:period.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | period |
| 54. Extension.extension:period.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | Period |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 56. Extension.extension:whereValid | |
| Slice Name | whereValid |
| Definition | An Extension |
| Short | Extension |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 58. Extension.extension:whereValid.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 60. Extension.extension:whereValid.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 62. Extension.extension:whereValid.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | whereValid |
| 64. Extension.extension:whereValid.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from USPS Two Letter Alphabetic Codes (required to http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state) |
| Type | Choice of: CodeableConcept, Reference(Plan-Net Location) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/us/davinci-pdex-plan-net/StructureDefinition/qualification |
| 68. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2022+ HL7 International / Financial Management. Package hl7.fhir.us.davinci-pdex-plan-net#1.2.0 based on FHIR 4.0.1. Generated 2024-10-10
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change