Da Vinci - Member Attribution (ATR) List, published by HL7 International / Financial Management. This guide is not an authorized publication; it is the continuous build for version 2.1.0-preview built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/davinci-atr/ and changes regularly. See the Directory of published versions
Active as of 2019-09-01 |
Definitions for the davinci-patient-list resource profile.
Guidance on how to interpret the contents of this table can be found here
0. Group | |
Definition | Sets expectations for supported capabilities of a Group resource for Patient List. |
Short | DaVinci Patient List |
2. Group.extension:intendedRecipientIdentifier | |
Slice Name | intendedRecipientIdentifier |
Control | 0..1 |
Type | Extension(ATR Intended Recipient Identifier Extension) (Extension Type: Identifier) |
Must Support | true |
4. Group.identifier | |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..* |
Type | Identifier |
Must Support | true |
6. Group.active | |
Control | 0..1 |
Must Support | true |
8. Group.type | |
Control | 1..1 |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Fixed Value | person |
10. Group.actual | |
Control | 1..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Fixed Value | true |
12. Group.name | |
Control | 0..1 |
Must Support | true |
14. Group.quantity | |
Control | 0..1 |
Must Support | true |
16. Group.managingEntity | |
Control | 1..1 |
Type | Reference(Davinci ATR Organization) |
Must Support | true |
18. Group.characteristic | |
Control | 0..* |
Must Support | false |
20. Group.characteristic.code | |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from DaVinci Group Characteristic (extensible to http://hl7.org/fhir/us/davinci-atr/ValueSet/davinci-group-characteristic )The set of characteristics shared by the members |
Must Support | true |
22. Group.characteristic.value[x] | |
Control | 1..1 |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Must Support | true |
24. Group.member | |
Control | 0..* |
Must Support | false |
26. Group.member.extension:associatedData | |
Slice Name | associatedData |
Control | 0..1 |
Type | Extension(ATR Any Resource Extension) (Extension Type: Reference) |
Must Support | true |
28. Group.member.entity | |
Control | 1..1 |
Type | Reference(Davinci ATR Patient) |
Must Support | true |
30. Group.member.period | |
Control | 0..1 |
Must Support | true |
32. Group.member.inactive | |
Control | 0..1 |
Must Support | true |
Guidance on how to interpret the contents of this table can be found here
0. Group | |
Definition | Sets expectations for supported capabilities of a Group resource for Patient List. Represents a defined collection of entities that may be discussed or acted upon collectively but which are not expected to act collectively, and are not formally or legally recognized; i.e. a collection of entities that isn't an Organization. |
Short | DaVinci Patient ListGroup of multiple entities |
Comments | If both Group.characteristic and Group.member are present, then the members are the individuals who were found who met the characteristic. It's possible that there might be other candidate members who meet the characteristic and aren't (yet) in the list. All members SHALL have the listed characteristics. |
Control | 0..* |
Is Modifier | false |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) grp-1: Can only have members if group is "actual" ( member.empty() or (actual = true) )grp-1: Can only have members if group is "actual" (member.empty() or (actual = true)) |
2. Group.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. Group.extension:intendedRecipientIdentifier | |
Slice Name | intendedRecipientIdentifier |
Definition | Specifies the Identifier of the entity that is going to be using the group. |
Short | ATR Intended Recipient Extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(ATR Intended Recipient Identifier Extension) (Extension Type: Identifier) |
Is Modifier | false |
Must Support | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
6. Group.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Summary | false |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
8. Group.identifier | |
Definition | A unique business identifier for this group. |
Short | Unique id |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..* |
Type | Identifier |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | Allows the group to be referenced from external specifications. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. Group.active | |
Definition | Indicates whether the record for the group is available for use or is merely being retained for historical purposes. |
Short | Whether this group's record is in active use |
Control | 0..1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to be able to mark a group record as not to be used because it was created in error or is otherwise no longer available (e.g. a herd that no longer exists). |
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. Group.type | |
Definition | Identifies the broad classification of the kind of resources the group includes. |
Short | person | animal | practitioner | device | medication | substance |
Comments | Group members SHALL be of the appropriate resource type (Patient for person or animal; or Practitioner, Device, Medication or Substance for the other types.). |
Control | 1..1 |
Binding | The codes SHALL be taken from GroupTypehttp://hl7.org/fhir/ValueSet/group-type|4.0.1 (required to http://hl7.org/fhir/ValueSet/group-type|4.0.1 )Types of resources that are part of group. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Identifies what type of resources the group is made up of. |
Fixed Value | person |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. Group.actual | |
Definition | If true, indicates that the resource refers to a specific group of real individuals. If false, the group defines a set of intended individuals. |
Short | Descriptive or actual |
Control | 1..1 This element is affected by the following invariants: grp-1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | There are use-cases for groups that define specific collections of individuals, and other groups that define "types" of intended individuals. The requirements for both kinds of groups are similar, so we use a single resource, distinguished by this flag. |
Fixed Value | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. Group.name | |
Definition | A label assigned to the group for human identification and communication. |
Short | Label for Group |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Used to identify the group in human communication. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. Group.quantity | |
Definition | A count of the number of resource instances that are part of the group. |
Short | Number of members |
Comments | Note that the quantity may be less than the number of members if some of the members are not active. |
Control | 0..1 |
Type | unsignedInt |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Group size is a common defining characteristic. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. Group.managingEntity | |
Definition | Entity responsible for defining and maintaining Group characteristics and/or registered members. |
Short | Entity that is the custodian of the Group's definition |
Comments | This does not strictly align with ownership of a herd or flock, but may suffice to represent that relationship in simple cases. More complex cases will require an extension. |
Control | 10..1 |
Type | Reference(Davinci ATR Organization, Organization, RelatedPerson, Practitioner, PractitionerRole) |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. Group.characteristic | |
Definition | Identifies traits whose presence r absence is shared by members of the group. |
Short | Include / Exclude group members by Trait |
Comments | All the identified characteristics must be true for an entity to a member of the group. |
Control | 0..* |
Type | BackboneElement |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | Needs to be a generic mechanism for identifying what individuals can be part of a group. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
24. Group.characteristic.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
26. Group.characteristic.code | |
Definition | A code that identifies the kind of trait being asserted. |
Short | Kind of characteristic |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from For example codes, see DaVinci Group Characteristic (extensible to http://hl7.org/fhir/us/davinci-atr/ValueSet/davinci-group-characteristic )The set of characteristics shared by the members List of characteristics used to describe group members; e.g. gender, age, owner, location, etc. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | true |
Summary | false |
Requirements | Need a formal way of identifying the characteristic being described. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
28. Group.characteristic.value[x] | |
Definition | The value of the trait that holds (or does not hold - see 'exclude') for members of the group. |
Short | Value held by characteristic |
Comments | For Range, it means members of the group have a value that falls somewhere within the specified range. |
Control | 1..1 |
Binding | Value of descriptive member characteristic; e.g. red, male, pneumonia, Caucasian, etc. |
Type | Choice of: CodeableConcept, boolean, Quantity, Range, Reference |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Summary | false |
Requirements | The value of the characteristic is what determines group membership. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
30. Group.characteristic.exclude | |
Definition | If true, indicates the characteristic is one that is NOT held by members of the group. |
Short | Group includes or excludes |
Comments | This is labeled as "Is Modifier" because applications cannot wrongly include excluded members as included or vice versa. |
Control | 1..1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Requirements | Sometimes group membership is determined by characteristics not possessed. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
32. Group.member | |
Definition | Identifies the resource instances that are members of the group. |
Short | Who or what is in group |
Control | 0..* This element is affected by the following invariants: grp-1 |
Type | BackboneElement |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | Often the only thing of interest about a group is "who's in it". |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
34. Group.member.extension:associatedData | |
Slice Name | associatedData |
Definition | Specifies a resource that is associated with the member of the Group. |
Short | ATR Any Resource Extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(ATR Any Resource Extension) (Extension Type: Reference) |
Is Modifier | false |
Must Support | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
36. Group.member.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
38. Group.member.entity | |
Definition | A reference to the entity that is a member of the group. Must be consistent with Group.type. If the entity is another group, then the type must be the same. |
Short | Reference to the group member |
Control | 1..1 |
Type | Reference(Davinci ATR Patient, Patient, Practitioner, PractitionerRole, Device, Medication, Substance, Group) |
Is Modifier | false |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
40. Group.member.period | |
Definition | The period that the member was in the group, if known. |
Short | Period member belonged to the group |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Must Support | true |
Summary | false |
Requirements | Need to track who was in a group at a particular time. |
Meaning if Missing | The member is in the group at this time |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
42. Group.member.inactive | |
Definition | A flag to indicate that the member is no longer in the group, but previously may have been a member. |
Short | If member is no longer in group |
Control | 0..1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Requirements | Sometimes you don't know when someone stopped being in a group, but not when. |
Meaning if Missing | Members are considered active unless explicitly specified otherwise |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. Group | |||||
Definition | Sets expectations for supported capabilities of a Group resource for Patient List. | ||||
Short | DaVinci Patient List | ||||
Comments | If both Group.characteristic and Group.member are present, then the members are the individuals who were found who met the characteristic. It's possible that there might be other candidate members who meet the characteristic and aren't (yet) in the list. All members SHALL have the listed characteristics. | ||||
Control | 0..* | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() )grp-1: Can only have members if group is "actual" ( member.empty() or (actual = true) ) | ||||
2. Group.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Short | Logical id of this artifact | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
Control | 0..1 | ||||
Type | id | ||||
Is Modifier | false | ||||
Summary | true | ||||
4. Group.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Short | Metadata about the resource | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
6. Group.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Short | A set of rules under which this content was created | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
8. Group.language | |||||
Definition | The base language in which the resource is written. | ||||
Short | Language of the resource content | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
10. Group.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Short | Text summary of the resource, for human interpretation | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
12. Group.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Short | Contained, inline Resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
14. Group.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Group.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
16. Group.extension:intendedRecipientIdentifier | |||||
Slice Name | intendedRecipientIdentifier | ||||
Definition | Specifies the Identifier of the entity that is going to be using the group. | ||||
Short | ATR Intended Recipient Extension | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(ATR Intended Recipient Identifier Extension) (Extension Type: Identifier) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
18. Group.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them | ||||
Summary | false | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
20. Group.identifier | |||||
Definition | A unique business identifier for this group. | ||||
Short | Unique id | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Allows the group to be referenced from external specifications. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
22. Group.active | |||||
Definition | Indicates whether the record for the group is available for use or is merely being retained for historical purposes. | ||||
Short | Whether this group's record is in active use | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Need to be able to mark a group record as not to be used because it was created in error or is otherwise no longer available (e.g. a herd that no longer exists). | ||||
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
24. Group.type | |||||
Definition | Identifies the broad classification of the kind of resources the group includes. | ||||
Short | person | animal | practitioner | device | medication | substance | ||||
Comments | Group members SHALL be of the appropriate resource type (Patient for person or animal; or Practitioner, Device, Medication or Substance for the other types.). | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from GroupType (required to http://hl7.org/fhir/ValueSet/group-type|4.0.1 )Types of resources that are part of group. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Identifies what type of resources the group is made up of. | ||||
Fixed Value | person | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
26. Group.actual | |||||
Definition | If true, indicates that the resource refers to a specific group of real individuals. If false, the group defines a set of intended individuals. | ||||
Short | Descriptive or actual | ||||
Control | 1..1 This element is affected by the following invariants: grp-1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | There are use-cases for groups that define specific collections of individuals, and other groups that define "types" of intended individuals. The requirements for both kinds of groups are similar, so we use a single resource, distinguished by this flag. | ||||
Fixed Value | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
28. Group.code | |||||
Definition | Provides a specific type of resource the group includes; e.g. "cow", "syringe", etc. | ||||
Short | Kind of Group members | ||||
Comments | This would generally be omitted for Person resources. | ||||
Control | 0..1 | ||||
Binding | Kind of particular resource; e.g. cow, syringe, lake, etc. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
30. Group.name | |||||
Definition | A label assigned to the group for human identification and communication. | ||||
Short | Label for Group | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Used to identify the group in human communication. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
32. Group.quantity | |||||
Definition | A count of the number of resource instances that are part of the group. | ||||
Short | Number of members | ||||
Comments | Note that the quantity may be less than the number of members if some of the members are not active. | ||||
Control | 0..1 | ||||
Type | unsignedInt | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Group size is a common defining characteristic. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
34. Group.managingEntity | |||||
Definition | Entity responsible for defining and maintaining Group characteristics and/or registered members. | ||||
Short | Entity that is the custodian of the Group's definition | ||||
Comments | This does not strictly align with ownership of a herd or flock, but may suffice to represent that relationship in simple cases. More complex cases will require an extension. | ||||
Control | 1..1 | ||||
Type | Reference(Davinci ATR Organization) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
36. Group.characteristic | |||||
Definition | Identifies traits whose presence r absence is shared by members of the group. | ||||
Short | Include / Exclude group members by Trait | ||||
Comments | All the identified characteristics must be true for an entity to a member of the group. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Must Support | false | ||||
Summary | false | ||||
Requirements | Needs to be a generic mechanism for identifying what individuals can be part of a group. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
38. Group.characteristic.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
40. Group.characteristic.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
42. Group.characteristic.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
44. Group.characteristic.code | |||||
Definition | A code that identifies the kind of trait being asserted. | ||||
Short | Kind of characteristic | ||||
Control | 1..1 | ||||
Binding | Unless not suitable, these codes SHALL be taken from DaVinci Group Characteristic (extensible to http://hl7.org/fhir/us/davinci-atr/ValueSet/davinci-group-characteristic )The set of characteristics shared by the members | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | Need a formal way of identifying the characteristic being described. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
46. Group.characteristic.value[x] | |||||
Definition | The value of the trait that holds (or does not hold - see 'exclude') for members of the group. | ||||
Short | Value held by characteristic | ||||
Comments | For Range, it means members of the group have a value that falls somewhere within the specified range. | ||||
Control | 1..1 | ||||
Binding | Value of descriptive member characteristic; e.g. red, male, pneumonia, Caucasian, etc. | ||||
Type | Choice of: CodeableConcept, boolean, Quantity, Range, Reference | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Must Support Types | No must-support rules about the choice of types/profiles | ||||
Summary | false | ||||
Requirements | The value of the characteristic is what determines group membership. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
48. Group.characteristic.exclude | |||||
Definition | If true, indicates the characteristic is one that is NOT held by members of the group. | ||||
Short | Group includes or excludes | ||||
Comments | This is labeled as "Is Modifier" because applications cannot wrongly include excluded members as included or vice versa. | ||||
Control | 1..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Sometimes group membership is determined by characteristics not possessed. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
50. Group.characteristic.period | |||||
Definition | The period over which the characteristic is tested; e.g. the patient had an operation during the month of June. | ||||
Short | Period over which characteristic is tested | ||||
Control | 0..1 | ||||
Type | Period | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
52. Group.member | |||||
Definition | Identifies the resource instances that are members of the group. | ||||
Short | Who or what is in group | ||||
Control | 0..* This element is affected by the following invariants: grp-1 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Must Support | false | ||||
Summary | false | ||||
Requirements | Often the only thing of interest about a group is "who's in it". | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
54. Group.member.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
56. Group.member.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Group.member.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
58. Group.member.extension:associatedData | |||||
Slice Name | associatedData | ||||
Definition | Specifies a resource that is associated with the member of the Group. | ||||
Short | ATR Any Resource Extension | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(ATR Any Resource Extension) (Extension Type: Reference) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
60. Group.member.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
62. Group.member.entity | |||||
Definition | A reference to the entity that is a member of the group. Must be consistent with Group.type. If the entity is another group, then the type must be the same. | ||||
Short | Reference to the group member | ||||
Control | 1..1 | ||||
Type | Reference(Davinci ATR Patient) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
64. Group.member.period | |||||
Definition | The period that the member was in the group, if known. | ||||
Short | Period member belonged to the group | ||||
Control | 0..1 | ||||
Type | Period | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | Need to track who was in a group at a particular time. | ||||
Meaning if Missing | The member is in the group at this time | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
66. Group.member.inactive | |||||
Definition | A flag to indicate that the member is no longer in the group, but previously may have been a member. | ||||
Short | If member is no longer in group | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | Sometimes you don't know when someone stopped being in a group, but not when. | ||||
Meaning if Missing | Members are considered active unless explicitly specified otherwise | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |