Da Vinci - Member Attribution (ATR) List
2.1.0-preview - STU 2.0.0 United States of America flag

Da Vinci - Member Attribution (ATR) List, published by HL7 International / Financial Management. This guide is not an authorized publication; it is the continuous build for version 2.1.0-preview built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/davinci-atr/ and changes regularly. See the Directory of published versions

Resource Profile: ATRPatient - Detailed Descriptions

Active as of 2019-09-01

Definitions for the atr-patient resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Patient
Definition

Sets expectations for supported capabilities for Patient resource in Member Attribution Lists. The following data elements are reused from US Core. Patient.identifier (MedicareId, MedicaidId, MemberId, MemberSSN, MRN etc) Patient.name (Family, Given) Patient.telecom (Home Phone, Mobile Phone, Work Phone, Email) Patient.gender Patient.birthDate Patient.address (Line, City, state, postal code, period) Patient.communication (Language).

ShortDavinci ATR Patient
Must Supportfalse
2. Patient.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..*
Must Supporttrue
SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ type.coding.system
  • value @ type.coding.code
  • 4. Patient.identifier:MedicareIdentifier
    Slice NameMedicareIdentifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1
    Must Supporttrue
    6. Patient.identifier:MedicareIdentifier.type
    Control1..1
    TypeCodeableConcept
    Must Supporttrue
    8. Patient.identifier:MedicareIdentifier.type.coding
    Control1..1
    Must Supporttrue
    10. Patient.identifier:MedicareIdentifier.type.coding.system
    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
    12. Patient.identifier:MedicareIdentifier.type.coding.code
    Control1..1
    Typecode
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Fixed ValueMC
    14. Patient.identifier:MedicaidIdentifier
    Slice NameMedicaidIdentifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1
    Must Supporttrue
    16. Patient.identifier:MedicaidIdentifier.type
    Control1..1
    TypeCodeableConcept
    Must Supporttrue
    18. Patient.identifier:MedicaidIdentifier.type.coding
    Control1..1
    Must Supporttrue
    20. Patient.identifier:MedicaidIdentifier.type.coding.system
    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
    22. Patient.identifier:MedicaidIdentifier.type.coding.code
    Control1..1
    Typecode
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Fixed ValueMA
    24. Patient.identifier:MR
    Slice NameMR
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    Must Supporttrue
    26. Patient.identifier:MR.type
    Control1..1
    TypeCodeableConcept
    Must Supporttrue
    28. Patient.identifier:MR.type.coding
    Control1..1
    Must Supporttrue
    30. Patient.identifier:MR.type.coding.system
    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
    32. Patient.identifier:MR.type.coding.code
    Control1..1
    Typecode
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Fixed ValueMR
    34. Patient.identifier:MemberIdentifier
    Slice NameMemberIdentifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    Must Supporttrue
    36. Patient.identifier:MemberIdentifier.type
    Control1..1
    TypeCodeableConcept
    Must Supporttrue
    38. Patient.identifier:MemberIdentifier.type.coding
    Control1..1
    Must Supporttrue
    40. Patient.identifier:MemberIdentifier.type.coding.system
    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
    42. Patient.identifier:MemberIdentifier.type.coding.code
    Control1..1
    Typecode
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Fixed ValueMB
    44. Patient.identifier:SSNIdentifier
    Slice NameSSNIdentifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1
    Must Supporttrue
    46. Patient.identifier:SSNIdentifier.type
    Control1..1
    TypeCodeableConcept
    Must Supporttrue
    48. Patient.identifier:SSNIdentifier.type.coding
    Control1..1
    Must Supporttrue
    50. Patient.identifier:SSNIdentifier.type.coding.system
    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
    52. Patient.identifier:SSNIdentifier.type.coding.code
    Control1..1
    Typecode
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Fixed ValueSB
    54. Patient.name
    Control1..*
    Must Supporttrue
    56. Patient.name.prefix
    Control0..1
    Must Supporttrue
    58. Patient.name.suffix
    Control0..*
    Must Supporttrue
    60. Patient.address
    Control0..*
    Must Supporttrue
    62. Patient.address.line
    Control0..*
    Must Supporttrue
    64. Patient.address.city
    Control0..1
    Must Supporttrue
    66. Patient.address.district
    Control0..1
    Must Supporttrue
    68. Patient.address.state
    Control0..1
    Must Supporttrue
    70. Patient.address.country
    Control0..1
    Must Supporttrue

    Guidance on how to interpret the contents of this table can be found here

    0. Patient
    Definition

    Sets expectations for supported capabilities for Patient resource in Member Attribution Lists. The following data elements are reused from US Core. Patient.identifier (MedicareId, MedicaidId, MemberId, MemberSSN, MRN etc) Patient.name (Family, Given) Patient.telecom (Home Phone, Mobile Phone, Work Phone, Email) Patient.gender Patient.birthDate Patient.address (Line, City, state, postal code, period) Patient.communication (Language).


    Demographics and other administrative information about an individual or animal receiving care or other health-related services.

    ShortDavinci ATR PatientInformation about an individual or animal receiving health care services
    Comments

    -

    Control0..*
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Alternate NamesSubjectOfCare Client Resident
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. Patient.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Patient.extension:race
    Slice Namerace
    Definition

    Concepts classifying the person into a named category of humans sharing common history, traits, geographical origin or nationality. The race codes used to represent these concepts are based upon the CDC Race and Ethnicity Code Set Version 1.0 which includes over 900 concepts for representing race and ethnicity of which 921 reference race. The race concepts are grouped by and pre-mapped to the 5 OMB race categories:

    • American Indian or Alaska Native
    • Asian
    • Black or African American
    • Native Hawaiian or Other Pacific Islander
    • White.
    Short(USCDI) US Core Race Extension
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(US Core Race Extension) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. Patient.extension:ethnicity
    Slice Nameethnicity
    Definition

    Concepts classifying the person into a named category of humans sharing common history, traits, geographical origin or nationality. The ethnicity codes used to represent these concepts are based upon the CDC ethnicity and Ethnicity Code Set Version 1.0 which includes over 900 concepts for representing race and ethnicity of which 43 reference ethnicity. The ethnicity concepts are grouped by and pre-mapped to the 2 OMB ethnicity categories: - Hispanic or Latino - Not Hispanic or Latino.

    Short(USCDI) US Core ethnicity Extension
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(US Core Ethnicity Extension) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Patient.extension:tribalAffiliation
    Slice NametribalAffiliation
    Definition

    A tribe or band with which a person associates whether or not they are an enrolled member.

    Short(USCDI) Tribal Affiliation Extension
    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(US Core Tribal Affiliation Extension) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Patient.extension:birthsex
    Slice Namebirthsex
    Definition

    A code classifying the person's sex assigned at birth as specified by the Office of the National Coordinator for Health IT (ONC).

    ShortBirth Sex Extension
    Comments

    The codes required are intended to present birth sex (i.e., the sex recorded on the patient's birth certificate) and not gender identity or reassigned sex.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(US Core Birth Sex Extension) (Extension Type: code)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Patient.extension:sex
    Slice Namesex
    Definition

    The US Core Sex Extension is used to reflect the documentation of a person's sex. It aligns with the C-CDA Sex Observation (LOINC 46098-0).

    Short(USCDI) Sex Extension
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(US Core Sex Extension) (Extension Type: code)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Patient.extension:genderIdentity
    Slice NamegenderIdentity
    Definition

    An individual's personal sense of being a man, woman, boy, girl, nonbinary, or something else.

    Short(USCDI) The individual's gender identity
    Comments

    This represents an individual's identity, ascertained by asking them what that identity is.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(US Core Gender Identity Extension) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Patient.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Patient.identifier
    Definition

    An identifier for this patient.

    Short(USCDI) An identifier for this patientAn identifier for this patient
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control10..*
    TypeIdentifier
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Patients are almost always assigned specific numerical identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ type.coding.system
    • value @ type.coding.code
    • 20. Patient.identifier.use
      Definition

      The purpose of this identifier.

      Shortusual | official | temp | secondary | old (If known)
      Comments

      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Patient.identifier.system
      Definition

      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      Short(USCDI) The namespace for the identifier valueThe namespace for the identifier value
      Comments

      Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Patient.identifier.value
      Definition

      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      Short(USCDI) The value that is unique within the system.The value that is unique
      Comments

      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Example<br/><b>General</b>:123456
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Patient.identifier:MedicareIdentifier
      Slice NameMedicareIdentifier
      Definition

      An identifier for this patient.

      Short(USCDI) An identifier for this patientAn identifier for this patient
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Patients are almost always assigned specific numerical identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Patient.identifier:MedicareIdentifier.use
      Definition

      The purpose of this identifier.

      Shortusual | official | temp | secondary | old (If known)
      Comments

      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Patient.identifier:MedicareIdentifier.type
      Definition

      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

      ShortDescription of identifier
      Comments

      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

      Control10..1
      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows users to make use of identifiers when the identifier system is not known.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Patient.identifier:MedicareIdentifier.type.coding
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control10..1*
      TypeCoding
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Patient.identifier:MedicareIdentifier.type.coding.system
      Definition

      The identification of the code system that defines the meaning of the symbol in the code.

      ShortIdentity of the terminology system
      Comments

      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to be unambiguous about the source of the definition of the symbol.

      Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. Patient.identifier:MedicareIdentifier.type.coding.code
      Definition

      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

      ShortSymbol in syntax defined by the system
      Control10..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to refer to a particular code in the system.

      Fixed ValueMC
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. Patient.identifier:MedicareIdentifier.system
      Definition

      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      Short(USCDI) The namespace for the identifier valueThe namespace for the identifier value
      Comments

      Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      40. Patient.identifier:MedicareIdentifier.value
      Definition

      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      Short(USCDI) The value that is unique within the system.The value that is unique
      Comments

      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Example<br/><b>General</b>:123456
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      42. Patient.identifier:MedicaidIdentifier
      Slice NameMedicaidIdentifier
      Definition

      An identifier for this patient.

      Short(USCDI) An identifier for this patientAn identifier for this patient
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Patients are almost always assigned specific numerical identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      44. Patient.identifier:MedicaidIdentifier.use
      Definition

      The purpose of this identifier.

      Shortusual | official | temp | secondary | old (If known)
      Comments

      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      46. Patient.identifier:MedicaidIdentifier.type
      Definition

      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

      ShortDescription of identifier
      Comments

      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

      Control10..1
      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows users to make use of identifiers when the identifier system is not known.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      48. Patient.identifier:MedicaidIdentifier.type.coding
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control10..1*
      TypeCoding
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      50. Patient.identifier:MedicaidIdentifier.type.coding.system
      Definition

      The identification of the code system that defines the meaning of the symbol in the code.

      ShortIdentity of the terminology system
      Comments

      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to be unambiguous about the source of the definition of the symbol.

      Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      52. Patient.identifier:MedicaidIdentifier.type.coding.code
      Definition

      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

      ShortSymbol in syntax defined by the system
      Control10..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to refer to a particular code in the system.

      Fixed ValueMA
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      54. Patient.identifier:MedicaidIdentifier.system
      Definition

      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      Short(USCDI) The namespace for the identifier valueThe namespace for the identifier value
      Comments

      Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      56. Patient.identifier:MedicaidIdentifier.value
      Definition

      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      Short(USCDI) The value that is unique within the system.The value that is unique
      Comments

      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Example<br/><b>General</b>:123456
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      58. Patient.identifier:MR
      Slice NameMR
      Definition

      An identifier for this patient.

      Short(USCDI) An identifier for this patientAn identifier for this patient
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Patients are almost always assigned specific numerical identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      60. Patient.identifier:MR.use
      Definition

      The purpose of this identifier.

      Shortusual | official | temp | secondary | old (If known)
      Comments

      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      62. Patient.identifier:MR.type
      Definition

      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

      ShortDescription of identifier
      Comments

      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

      Control10..1
      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows users to make use of identifiers when the identifier system is not known.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      64. Patient.identifier:MR.type.coding
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control10..1*
      TypeCoding
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      66. Patient.identifier:MR.type.coding.system
      Definition

      The identification of the code system that defines the meaning of the symbol in the code.

      ShortIdentity of the terminology system
      Comments

      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to be unambiguous about the source of the definition of the symbol.

      Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      68. Patient.identifier:MR.type.coding.code
      Definition

      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

      ShortSymbol in syntax defined by the system
      Control10..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to refer to a particular code in the system.

      Fixed ValueMR
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      70. Patient.identifier:MR.system
      Definition

      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      Short(USCDI) The namespace for the identifier valueThe namespace for the identifier value
      Comments

      Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      72. Patient.identifier:MR.value
      Definition

      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      Short(USCDI) The value that is unique within the system.The value that is unique
      Comments

      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Example<br/><b>General</b>:123456
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      74. Patient.identifier:MemberIdentifier
      Slice NameMemberIdentifier
      Definition

      An identifier for this patient.

      Short(USCDI) An identifier for this patientAn identifier for this patient
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Patients are almost always assigned specific numerical identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      76. Patient.identifier:MemberIdentifier.use
      Definition

      The purpose of this identifier.

      Shortusual | official | temp | secondary | old (If known)
      Comments

      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      78. Patient.identifier:MemberIdentifier.type
      Definition

      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

      ShortDescription of identifier
      Comments

      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

      Control10..1
      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows users to make use of identifiers when the identifier system is not known.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      80. Patient.identifier:MemberIdentifier.type.coding
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control10..1*
      TypeCoding
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      82. Patient.identifier:MemberIdentifier.type.coding.system
      Definition

      The identification of the code system that defines the meaning of the symbol in the code.

      ShortIdentity of the terminology system
      Comments

      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to be unambiguous about the source of the definition of the symbol.

      Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      84. Patient.identifier:MemberIdentifier.type.coding.code
      Definition

      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

      ShortSymbol in syntax defined by the system
      Control10..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to refer to a particular code in the system.

      Fixed ValueMB
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      86. Patient.identifier:MemberIdentifier.system
      Definition

      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      Short(USCDI) The namespace for the identifier valueThe namespace for the identifier value
      Comments

      Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      88. Patient.identifier:MemberIdentifier.value
      Definition

      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      Short(USCDI) The value that is unique within the system.The value that is unique
      Comments

      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Example<br/><b>General</b>:123456
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      90. Patient.identifier:SSNIdentifier
      Slice NameSSNIdentifier
      Definition

      An identifier for this patient.

      Short(USCDI) An identifier for this patientAn identifier for this patient
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Patients are almost always assigned specific numerical identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      92. Patient.identifier:SSNIdentifier.use
      Definition

      The purpose of this identifier.

      Shortusual | official | temp | secondary | old (If known)
      Comments

      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      94. Patient.identifier:SSNIdentifier.type
      Definition

      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

      ShortDescription of identifier
      Comments

      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

      Control10..1
      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows users to make use of identifiers when the identifier system is not known.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      96. Patient.identifier:SSNIdentifier.type.coding
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control10..1*
      TypeCoding
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      98. Patient.identifier:SSNIdentifier.type.coding.system
      Definition

      The identification of the code system that defines the meaning of the symbol in the code.

      ShortIdentity of the terminology system
      Comments

      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to be unambiguous about the source of the definition of the symbol.

      Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      100. Patient.identifier:SSNIdentifier.type.coding.code
      Definition

      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

      ShortSymbol in syntax defined by the system
      Control10..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to refer to a particular code in the system.

      Fixed ValueSB
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      102. Patient.identifier:SSNIdentifier.system
      Definition

      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      Short(USCDI) The namespace for the identifier valueThe namespace for the identifier value
      Comments

      Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      104. Patient.identifier:SSNIdentifier.value
      Definition

      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      Short(USCDI) The value that is unique within the system.The value that is unique
      Comments

      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Example<br/><b>General</b>:123456
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      106. Patient.active
      Definition

      Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

      It is often used to filter patient lists to exclude inactive patients

      Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

      ShortWhether this patient's record is in active use
      Comments

      If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

      Control0..1
      Typeboolean
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to be able to mark a patient record as not to be used because it was created in error.

      Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      108. Patient.name
      Definition

      A name associated with the individual.

      Short(USCDI) A name associated with the patientA name associated with the patient
      Comments

      A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

      Control10..*
      TypeHumanName
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      us-core-6: At least name.given and/or name.family are present or, if neither is available, the Data Absent Reason Extension is present. ((family.exists() or given.exists()) xor extension.where(url='http://hl7.org/fhir/StructureDefinition/data-absent-reason').exists())
      110. Patient.name.use
      Definition

      Identifies the purpose for this name.

      Short(USCDI) usual | official | temp | nickname | anonymous | old | maidenusual | official | temp | nickname | anonymous | old | maiden
      Comments

      Applications can assume that a name is current unless it explicitly says that it is temporary or old.

      Control0..1
      BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

      The use of a human name.

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows the appropriate name for a particular context of use to be selected from among a set of names.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      112. Patient.name.family
      Definition

      The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

      Short(USCDI) Family name (often called 'Surname')Family name (often called 'Surname')
      Comments

      Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

      Control0..1
      This element is affected by the following invariants: us-core-6
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Alternate Namessurname
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      114. Patient.name.given
      Definition

      Given name.

      Short(USCDI) Given names (not always 'first'). Includes middle namesGiven names (not always 'first'). Includes middle names
      Comments

      If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

      Control0..*
      This element is affected by the following invariants: us-core-6
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Alternate Namesfirst name, middle name
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      116. Patient.name.prefix
      Definition

      Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

      ShortParts that come before the name
      Control0..1*
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      118. Patient.name.suffix
      Definition

      Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

      Short(USCDI) Parts that come after the nameParts that come after the name
      Control0..*
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      120. Patient.telecom
      Definition

      A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

      Short(USCDI) A contact detail for the individualA contact detail for the individual
      Comments

      A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

      Control0..*
      TypeContactPoint
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Requirements

      People have (primary) ways to contact them in some way such as phone, email.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      122. Patient.telecom.system
      Definition

      Telecommunications form for contact point - what communications system is required to make use of the contact.

      Short(USCDI) phone | fax | email | pager | url | sms | otherphone | fax | email | pager | url | sms | other
      Control10..1
      This element is affected by the following invariants: cpt-2
      BindingThe codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|4.0.1
      (required to http://hl7.org/fhir/ValueSet/contact-point-system)

      Telecommunications form for contact point.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      124. Patient.telecom.value
      Definition

      The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

      Short(USCDI) The actual contact point detailsThe actual contact point details
      Comments

      Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to support legacy numbers that are not in a tightly controlled format.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      126. Patient.telecom.use
      Definition

      Identifies the purpose for the contact point.

      Short(USCDI) home | work | temp | old | mobile - purpose of this contact pointhome | work | temp | old | mobile - purpose of this contact point
      Comments

      Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

      Control0..1
      BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/contact-point-use)
      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      128. Patient.gender
      Definition

      Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

      Short(USCDI) male | female | other | unknownmale | female | other | unknown
      Comments

      The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

      Control10..1
      BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
      (required to http://hl7.org/fhir/ValueSet/administrative-gender)
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Needed for identification of the individual, in combination with (at least) name and birth date.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      130. Patient.birthDate
      Definition

      The date of birth for the individual.

      Short(USCDI) The date of birth for the individualThe date of birth for the individual
      Comments

      At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

      Control0..1
      Typedate
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Age of the individual drives many clinical processes.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      LOINC Code21112-8
      132. Patient.deceased[x]
      Definition

      Indicates if the individual is deceased or not.

      Short(USCDI) Indicates if the individual is deceased or notIndicates if the individual is deceased or not
      Comments

      If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

      Control0..1
      TypeChoice of: boolean, dateTime
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      134. Patient.address
      Definition

      An address for the individual.

      Short(USCDI) An address for the individualAn address for the individual
      Comments

      Patient may have multiple addresses with different uses or applicable periods.

      Control0..*
      TypeAddress
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      136. Patient.address.use
      Definition

      The purpose of this address.

      Short(USCDI) home | work | temp | old | billing - purpose of this addresshome | work | temp | old | billing - purpose of this address
      Comments

      Applications can assume that an address is current unless it explicitly says that it is temporary or old.

      Control0..1
      BindingThe codes SHALL be taken from AddressUsehttp://hl7.org/fhir/ValueSet/address-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/address-use|4.0.1)

      The use of an address.

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows an appropriate address to be chosen from a list of many.

      Example<br/><b>General</b>:home
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      138. Patient.address.line
      Definition

      This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

      Short(USCDI) Street name, number, direction & P.O. Box etc.Street name, number, direction & P.O. Box etc.
      Control0..*
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Example<br/><b>General</b>:137 Nowhere Street
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      140. Patient.address.city
      Definition

      The name of the city, town, suburb, village or other community or delivery center.

      Short(USCDI) Name of city, town etc.Name of city, town etc.
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Alternate NamesMunicpality
      Example<br/><b>General</b>:Erewhon
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      142. Patient.address.district
      Definition

      The name of the administrative area (county).

      ShortDistrict name (aka county)
      Comments

      District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Alternate NamesCounty
      Example<br/><b>General</b>:Madison
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      144. Patient.address.state
      Definition

      Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

      Short(USCDI) Sub-unit of country (abbreviations ok)Sub-unit of country (abbreviations ok)
      Control0..1
      BindingUnless not suitable, these codes SHALL be taken from For codes, see USPS Two Letter Alphabetic Codes
      (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state)

      Two Letter USPS alphabetic codes.

      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Alternate NamesProvince, Territory
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      146. Patient.address.postalCode
      Definition

      A postal code designating a region defined by the postal service.

      Short(USCDI) US Zip CodesPostal code for area
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Alternate NamesZip, Zip Code
      Example<br/><b>General</b>:9132
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      148. Patient.address.country
      Definition

      Country - a nation as commonly understood or generally accepted.

      ShortCountry (e.g. can be ISO 3166 2 or 3 letter code)
      Comments

      ISO 3166 3 letter codes can be used in place of a human readable country name.

      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      150. Patient.communication
      Definition

      A language which may be used to communicate with the patient about his or her health.

      Short(USCDI) A language which may be used to communicate with the patient about his or her healthA language which may be used to communicate with the patient about his or her health
      Comments

      If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Requirements

      If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      152. Patient.communication.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      154. Patient.communication.language
      Definition

      The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

      Short(USCDI) The language which can be used to communicate with the patient about his or her healthThe language which can be used to communicate with the patient about his or her health
      Comments

      The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from Language codes with language and optionally a region modifierhttp://hl7.org/fhir/ValueSet/languages
      (extensible to http://hl7.org/fhir/us/core/ValueSet/simple-language)
      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      156. Patient.link
      Definition

      Link to another patient resource that concerns the same actual patient.

      ShortLink to another patient resource that concerns the same actual person
      Comments

      There is no assumption that linked patient records have mutual links.

      Control0..*
      TypeBackboneElement
      Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
      Summarytrue
      Requirements

      There are multiple use cases:

      • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
      • Distribution of patient information across multiple servers.
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      158. Patient.link.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      160. Patient.link.other
      Definition

      The other patient resource that the link refers to.

      ShortThe other patient or related person resource that the link refers to
      Comments

      Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

      Control1..1
      TypeReference(Patient, RelatedPerson)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      162. Patient.link.type
      Definition

      The type of link between this patient resource and another patient resource.

      Shortreplaced-by | replaces | refer | seealso
      Control1..1
      BindingThe codes SHALL be taken from LinkTypehttp://hl7.org/fhir/ValueSet/link-type|4.0.1
      (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

      The type of link between this patient resource and another patient resource.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Patient
      Definition

      Sets expectations for supported capabilities for Patient resource in Member Attribution Lists. The following data elements are reused from US Core. Patient.identifier (MedicareId, MedicaidId, MemberId, MemberSSN, MRN etc) Patient.name (Family, Given) Patient.telecom (Home Phone, Mobile Phone, Work Phone, Email) Patient.gender Patient.birthDate Patient.address (Line, City, state, postal code, period) Patient.communication (Language).

      ShortDavinci ATR Patient
      Comments

      -

      Control0..*
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate NamesSubjectOfCare Client Resident
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. Patient.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. Patient.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Patient.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Patient.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Patient.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Patient.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Patient.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. Patient.extension:race
        Slice Namerace
        Definition

        Concepts classifying the person into a named category of humans sharing common history, traits, geographical origin or nationality. The race codes used to represent these concepts are based upon the CDC Race and Ethnicity Code Set Version 1.0 which includes over 900 concepts for representing race and ethnicity of which 921 reference race. The race concepts are grouped by and pre-mapped to the 5 OMB race categories:

        • American Indian or Alaska Native
        • Asian
        • Black or African American
        • Native Hawaiian or Other Pacific Islander
        • White.
        Short(USCDI) US Core Race Extension
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(US Core Race Extension) (Complex Extension)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. Patient.extension:ethnicity
        Slice Nameethnicity
        Definition

        Concepts classifying the person into a named category of humans sharing common history, traits, geographical origin or nationality. The ethnicity codes used to represent these concepts are based upon the CDC ethnicity and Ethnicity Code Set Version 1.0 which includes over 900 concepts for representing race and ethnicity of which 43 reference ethnicity. The ethnicity concepts are grouped by and pre-mapped to the 2 OMB ethnicity categories: - Hispanic or Latino - Not Hispanic or Latino.

        Short(USCDI) US Core ethnicity Extension
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(US Core Ethnicity Extension) (Complex Extension)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. Patient.extension:tribalAffiliation
        Slice NametribalAffiliation
        Definition

        A tribe or band with which a person associates whether or not they are an enrolled member.

        Short(USCDI) Tribal Affiliation Extension
        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(US Core Tribal Affiliation Extension) (Complex Extension)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. Patient.extension:birthsex
        Slice Namebirthsex
        Definition

        A code classifying the person's sex assigned at birth as specified by the Office of the National Coordinator for Health IT (ONC).

        ShortBirth Sex Extension
        Comments

        The codes required are intended to present birth sex (i.e., the sex recorded on the patient's birth certificate) and not gender identity or reassigned sex.

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(US Core Birth Sex Extension) (Extension Type: code)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        24. Patient.extension:sex
        Slice Namesex
        Definition

        The US Core Sex Extension is used to reflect the documentation of a person's sex. It aligns with the C-CDA Sex Observation (LOINC 46098-0).

        Short(USCDI) Sex Extension
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(US Core Sex Extension) (Extension Type: code)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        26. Patient.extension:genderIdentity
        Slice NamegenderIdentity
        Definition

        An individual's personal sense of being a man, woman, boy, girl, nonbinary, or something else.

        Short(USCDI) The individual's gender identity
        Comments

        This represents an individual's identity, ascertained by asking them what that identity is.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(US Core Gender Identity Extension) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        28. Patient.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        30. Patient.identifier
        Definition

        An identifier for this patient.

        Short(USCDI) An identifier for this patient
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control1..*
        TypeIdentifier
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Patients are almost always assigned specific numerical identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ type.coding.system
        • value @ type.coding.code
        • 32. Patient.identifier.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          34. Patient.identifier.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 36. Patient.identifier.use
            Definition

            The purpose of this identifier.

            Shortusual | official | temp | secondary | old (If known)
            Comments

            Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

            Control0..1
            BindingThe codes SHALL be taken from IdentifierUse
            (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

            Identifies the purpose for this identifier, if known .

            Typecode
            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            38. Patient.identifier.type
            Definition

            A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

            ShortDescription of identifier
            Comments

            This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
            (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

            A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows users to make use of identifiers when the identifier system is not known.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            40. Patient.identifier.system
            Definition

            Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

            Short(USCDI) The namespace for the identifier value
            Comments

            Identifier.system is always case sensitive.

            Control1..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

            Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            42. Patient.identifier.value
            Definition

            The portion of the identifier typically relevant to the user and which is unique within the context of the system.

            Short(USCDI) The value that is unique within the system.
            Comments

            If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Example<br/><b>General</b>:123456
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            44. Patient.identifier.period
            Definition

            Time period during which identifier is/was valid for use.

            ShortTime period when id is/was valid for use
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            46. Patient.identifier.assigner
            Definition

            Organization that issued/manages the identifier.

            ShortOrganization that issued id (may be just text)
            Comments

            The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

            Control0..1
            TypeReference(Organization)
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            48. Patient.identifier:MedicareIdentifier
            Slice NameMedicareIdentifier
            Definition

            An identifier for this patient.

            Short(USCDI) An identifier for this patient
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..1
            TypeIdentifier
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Patients are almost always assigned specific numerical identifiers.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            50. Patient.identifier:MedicareIdentifier.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            52. Patient.identifier:MedicareIdentifier.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 54. Patient.identifier:MedicareIdentifier.use
              Definition

              The purpose of this identifier.

              Shortusual | official | temp | secondary | old (If known)
              Comments

              Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

              Control0..1
              BindingThe codes SHALL be taken from IdentifierUse
              (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

              Identifies the purpose for this identifier, if known .

              Typecode
              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. Patient.identifier:MedicareIdentifier.type
              Definition

              A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

              ShortDescription of identifier
              Comments

              This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

              Control1..1
              BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
              (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

              A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Requirements

              Allows users to make use of identifiers when the identifier system is not known.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. Patient.identifier:MedicareIdentifier.type.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              60. Patient.identifier:MedicareIdentifier.type.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Patient.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 62. Patient.identifier:MedicareIdentifier.type.coding
                Definition

                A reference to a code defined by a terminology system.

                ShortCode defined by a terminology system
                Comments

                Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                Control1..1
                TypeCoding
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Allows for alternative encodings within a code system, and translations to other code systems.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                64. Patient.identifier:MedicareIdentifier.type.coding.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                66. Patient.identifier:MedicareIdentifier.type.coding.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Patient.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 68. Patient.identifier:MedicareIdentifier.type.coding.system
                  Definition

                  The identification of the code system that defines the meaning of the symbol in the code.

                  ShortIdentity of the terminology system
                  Comments

                  The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                  Control1..1
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Need to be unambiguous about the source of the definition of the symbol.

                  Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  70. Patient.identifier:MedicareIdentifier.type.coding.version
                  Definition

                  The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                  ShortVersion of the system - if relevant
                  Comments

                  Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                  NoteThis is a business version Id, not a resource version Id (see discussion)
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  72. Patient.identifier:MedicareIdentifier.type.coding.code
                  Definition

                  A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                  ShortSymbol in syntax defined by the system
                  Control1..1
                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Need to refer to a particular code in the system.

                  Fixed ValueMC
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  74. Patient.identifier:MedicareIdentifier.type.coding.display
                  Definition

                  A representation of the meaning of the code in the system, following the rules of the system.

                  ShortRepresentation defined by the system
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  76. Patient.identifier:MedicareIdentifier.type.coding.userSelected
                  Definition

                  Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                  ShortIf this coding was chosen directly by the user
                  Comments

                  Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                  Control0..1
                  Typeboolean
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  78. Patient.identifier:MedicareIdentifier.type.text
                  Definition

                  A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                  ShortPlain text representation of the concept
                  Comments

                  Very often the text is the same as a displayName of one of the codings.

                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  80. Patient.identifier:MedicareIdentifier.system
                  Definition

                  Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                  Short(USCDI) The namespace for the identifier value
                  Comments

                  Identifier.system is always case sensitive.

                  Control1..1
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                  Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  82. Patient.identifier:MedicareIdentifier.value
                  Definition

                  The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                  Short(USCDI) The value that is unique within the system.
                  Comments

                  If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                  Control1..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Example<br/><b>General</b>:123456
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  84. Patient.identifier:MedicareIdentifier.period
                  Definition

                  Time period during which identifier is/was valid for use.

                  ShortTime period when id is/was valid for use
                  Control0..1
                  TypePeriod
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  86. Patient.identifier:MedicareIdentifier.assigner
                  Definition

                  Organization that issued/manages the identifier.

                  ShortOrganization that issued id (may be just text)
                  Comments

                  The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                  Control0..1
                  TypeReference(Organization)
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  88. Patient.identifier:MedicaidIdentifier
                  Slice NameMedicaidIdentifier
                  Definition

                  An identifier for this patient.

                  Short(USCDI) An identifier for this patient
                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..1
                  TypeIdentifier
                  Is Modifierfalse
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Patients are almost always assigned specific numerical identifiers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  90. Patient.identifier:MedicaidIdentifier.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  92. Patient.identifier:MedicaidIdentifier.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 94. Patient.identifier:MedicaidIdentifier.use
                    Definition

                    The purpose of this identifier.

                    Shortusual | official | temp | secondary | old (If known)
                    Comments

                    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                    Control0..1
                    BindingThe codes SHALL be taken from IdentifierUse
                    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                    Identifies the purpose for this identifier, if known .

                    Typecode
                    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    96. Patient.identifier:MedicaidIdentifier.type
                    Definition

                    A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                    ShortDescription of identifier
                    Comments

                    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                    Control1..1
                    BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                    (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                    A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Allows users to make use of identifiers when the identifier system is not known.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    98. Patient.identifier:MedicaidIdentifier.type.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    100. Patient.identifier:MedicaidIdentifier.type.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Patient.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 102. Patient.identifier:MedicaidIdentifier.type.coding
                      Definition

                      A reference to a code defined by a terminology system.

                      ShortCode defined by a terminology system
                      Comments

                      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                      Control1..1
                      TypeCoding
                      Is Modifierfalse
                      Must Supporttrue
                      Summarytrue
                      Requirements

                      Allows for alternative encodings within a code system, and translations to other code systems.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      104. Patient.identifier:MedicaidIdentifier.type.coding.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      106. Patient.identifier:MedicaidIdentifier.type.coding.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Patient.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 108. Patient.identifier:MedicaidIdentifier.type.coding.system
                        Definition

                        The identification of the code system that defines the meaning of the symbol in the code.

                        ShortIdentity of the terminology system
                        Comments

                        The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                        Control1..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summarytrue
                        Requirements

                        Need to be unambiguous about the source of the definition of the symbol.

                        Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        110. Patient.identifier:MedicaidIdentifier.type.coding.version
                        Definition

                        The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                        ShortVersion of the system - if relevant
                        Comments

                        Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                        NoteThis is a business version Id, not a resource version Id (see discussion)
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        112. Patient.identifier:MedicaidIdentifier.type.coding.code
                        Definition

                        A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                        ShortSymbol in syntax defined by the system
                        Control1..1
                        Typecode
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summarytrue
                        Requirements

                        Need to refer to a particular code in the system.

                        Fixed ValueMA
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        114. Patient.identifier:MedicaidIdentifier.type.coding.display
                        Definition

                        A representation of the meaning of the code in the system, following the rules of the system.

                        ShortRepresentation defined by the system
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        116. Patient.identifier:MedicaidIdentifier.type.coding.userSelected
                        Definition

                        Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                        ShortIf this coding was chosen directly by the user
                        Comments

                        Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                        Control0..1
                        Typeboolean
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        118. Patient.identifier:MedicaidIdentifier.type.text
                        Definition

                        A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                        ShortPlain text representation of the concept
                        Comments

                        Very often the text is the same as a displayName of one of the codings.

                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        120. Patient.identifier:MedicaidIdentifier.system
                        Definition

                        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                        Short(USCDI) The namespace for the identifier value
                        Comments

                        Identifier.system is always case sensitive.

                        Control1..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summarytrue
                        Requirements

                        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        122. Patient.identifier:MedicaidIdentifier.value
                        Definition

                        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                        Short(USCDI) The value that is unique within the system.
                        Comments

                        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summarytrue
                        Example<br/><b>General</b>:123456
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        124. Patient.identifier:MedicaidIdentifier.period
                        Definition

                        Time period during which identifier is/was valid for use.

                        ShortTime period when id is/was valid for use
                        Control0..1
                        TypePeriod
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        126. Patient.identifier:MedicaidIdentifier.assigner
                        Definition

                        Organization that issued/manages the identifier.

                        ShortOrganization that issued id (may be just text)
                        Comments

                        The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                        Control0..1
                        TypeReference(Organization)
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        128. Patient.identifier:MR
                        Slice NameMR
                        Definition

                        An identifier for this patient.

                        Short(USCDI) An identifier for this patient
                        NoteThis is a business identifier, not a resource identifier (see discussion)
                        Control0..*
                        TypeIdentifier
                        Is Modifierfalse
                        Must Supporttrue
                        Summarytrue
                        Requirements

                        Patients are almost always assigned specific numerical identifiers.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        130. Patient.identifier:MR.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        132. Patient.identifier:MR.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 134. Patient.identifier:MR.use
                          Definition

                          The purpose of this identifier.

                          Shortusual | official | temp | secondary | old (If known)
                          Comments

                          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                          Control0..1
                          BindingThe codes SHALL be taken from IdentifierUse
                          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                          Identifies the purpose for this identifier, if known .

                          Typecode
                          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          136. Patient.identifier:MR.type
                          Definition

                          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                          ShortDescription of identifier
                          Comments

                          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                          Control1..1
                          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Must Supporttrue
                          Summarytrue
                          Requirements

                          Allows users to make use of identifiers when the identifier system is not known.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          138. Patient.identifier:MR.type.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          140. Patient.identifier:MR.type.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Patient.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 142. Patient.identifier:MR.type.coding
                            Definition

                            A reference to a code defined by a terminology system.

                            ShortCode defined by a terminology system
                            Comments

                            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                            Control1..1
                            TypeCoding
                            Is Modifierfalse
                            Must Supporttrue
                            Summarytrue
                            Requirements

                            Allows for alternative encodings within a code system, and translations to other code systems.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            144. Patient.identifier:MR.type.coding.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            146. Patient.identifier:MR.type.coding.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Patient.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 148. Patient.identifier:MR.type.coding.system
                              Definition

                              The identification of the code system that defines the meaning of the symbol in the code.

                              ShortIdentity of the terminology system
                              Comments

                              The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                              Control1..1
                              Typeuri
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              Summarytrue
                              Requirements

                              Need to be unambiguous about the source of the definition of the symbol.

                              Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              150. Patient.identifier:MR.type.coding.version
                              Definition

                              The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                              ShortVersion of the system - if relevant
                              Comments

                              Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                              NoteThis is a business version Id, not a resource version Id (see discussion)
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              152. Patient.identifier:MR.type.coding.code
                              Definition

                              A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                              ShortSymbol in syntax defined by the system
                              Control1..1
                              Typecode
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              Summarytrue
                              Requirements

                              Need to refer to a particular code in the system.

                              Fixed ValueMR
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              154. Patient.identifier:MR.type.coding.display
                              Definition

                              A representation of the meaning of the code in the system, following the rules of the system.

                              ShortRepresentation defined by the system
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              156. Patient.identifier:MR.type.coding.userSelected
                              Definition

                              Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                              ShortIf this coding was chosen directly by the user
                              Comments

                              Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                              Control0..1
                              Typeboolean
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              158. Patient.identifier:MR.type.text
                              Definition

                              A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                              ShortPlain text representation of the concept
                              Comments

                              Very often the text is the same as a displayName of one of the codings.

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              160. Patient.identifier:MR.system
                              Definition

                              Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                              Short(USCDI) The namespace for the identifier value
                              Comments

                              Identifier.system is always case sensitive.

                              Control1..1
                              Typeuri
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              Summarytrue
                              Requirements

                              There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                              Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              162. Patient.identifier:MR.value
                              Definition

                              The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                              Short(USCDI) The value that is unique within the system.
                              Comments

                              If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                              Control1..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              Summarytrue
                              Example<br/><b>General</b>:123456
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              164. Patient.identifier:MR.period
                              Definition

                              Time period during which identifier is/was valid for use.

                              ShortTime period when id is/was valid for use
                              Control0..1
                              TypePeriod
                              Is Modifierfalse
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              166. Patient.identifier:MR.assigner
                              Definition

                              Organization that issued/manages the identifier.

                              ShortOrganization that issued id (may be just text)
                              Comments

                              The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                              Control0..1
                              TypeReference(Organization)
                              Is Modifierfalse
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              168. Patient.identifier:MemberIdentifier
                              Slice NameMemberIdentifier
                              Definition

                              An identifier for this patient.

                              Short(USCDI) An identifier for this patient
                              NoteThis is a business identifier, not a resource identifier (see discussion)
                              Control0..*
                              TypeIdentifier
                              Is Modifierfalse
                              Must Supporttrue
                              Summarytrue
                              Requirements

                              Patients are almost always assigned specific numerical identifiers.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              170. Patient.identifier:MemberIdentifier.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              172. Patient.identifier:MemberIdentifier.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 174. Patient.identifier:MemberIdentifier.use
                                Definition

                                The purpose of this identifier.

                                Shortusual | official | temp | secondary | old (If known)
                                Comments

                                Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                                Control0..1
                                BindingThe codes SHALL be taken from IdentifierUse
                                (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                                Identifies the purpose for this identifier, if known .

                                Typecode
                                Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                176. Patient.identifier:MemberIdentifier.type
                                Definition

                                A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                                ShortDescription of identifier
                                Comments

                                This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                                Control1..1
                                BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                                (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                                A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Must Supporttrue
                                Summarytrue
                                Requirements

                                Allows users to make use of identifiers when the identifier system is not known.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                178. Patient.identifier:MemberIdentifier.type.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                180. Patient.identifier:MemberIdentifier.type.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Patient.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 182. Patient.identifier:MemberIdentifier.type.coding
                                  Definition

                                  A reference to a code defined by a terminology system.

                                  ShortCode defined by a terminology system
                                  Comments

                                  Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                  Control1..1
                                  TypeCoding
                                  Is Modifierfalse
                                  Must Supporttrue
                                  Summarytrue
                                  Requirements

                                  Allows for alternative encodings within a code system, and translations to other code systems.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  184. Patient.identifier:MemberIdentifier.type.coding.id
                                  Definition

                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  ShortUnique id for inter-element referencing
                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  186. Patient.identifier:MemberIdentifier.type.coding.extension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                  ShortAdditional content defined by implementations
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesextensions, user content
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  SlicingThis element introduces a set of slices on Patient.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ url
                                  • 188. Patient.identifier:MemberIdentifier.type.coding.system
                                    Definition

                                    The identification of the code system that defines the meaning of the symbol in the code.

                                    ShortIdentity of the terminology system
                                    Comments

                                    The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                                    Control1..1
                                    Typeuri
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Requirements

                                    Need to be unambiguous about the source of the definition of the symbol.

                                    Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    190. Patient.identifier:MemberIdentifier.type.coding.version
                                    Definition

                                    The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                    ShortVersion of the system - if relevant
                                    Comments

                                    Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                    NoteThis is a business version Id, not a resource version Id (see discussion)
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    192. Patient.identifier:MemberIdentifier.type.coding.code
                                    Definition

                                    A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                    ShortSymbol in syntax defined by the system
                                    Control1..1
                                    Typecode
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Requirements

                                    Need to refer to a particular code in the system.

                                    Fixed ValueMB
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    194. Patient.identifier:MemberIdentifier.type.coding.display
                                    Definition

                                    A representation of the meaning of the code in the system, following the rules of the system.

                                    ShortRepresentation defined by the system
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    196. Patient.identifier:MemberIdentifier.type.coding.userSelected
                                    Definition

                                    Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                    ShortIf this coding was chosen directly by the user
                                    Comments

                                    Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                    Control0..1
                                    Typeboolean
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    198. Patient.identifier:MemberIdentifier.type.text
                                    Definition

                                    A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                    ShortPlain text representation of the concept
                                    Comments

                                    Very often the text is the same as a displayName of one of the codings.

                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    200. Patient.identifier:MemberIdentifier.system
                                    Definition

                                    Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                                    Short(USCDI) The namespace for the identifier value
                                    Comments

                                    Identifier.system is always case sensitive.

                                    Control1..1
                                    Typeuri
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Requirements

                                    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                                    Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    202. Patient.identifier:MemberIdentifier.value
                                    Definition

                                    The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                                    Short(USCDI) The value that is unique within the system.
                                    Comments

                                    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                                    Control1..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supporttrue
                                    Summarytrue
                                    Example<br/><b>General</b>:123456
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    204. Patient.identifier:MemberIdentifier.period
                                    Definition

                                    Time period during which identifier is/was valid for use.

                                    ShortTime period when id is/was valid for use
                                    Control0..1
                                    TypePeriod
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    206. Patient.identifier:MemberIdentifier.assigner
                                    Definition

                                    Organization that issued/manages the identifier.

                                    ShortOrganization that issued id (may be just text)
                                    Comments

                                    The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                                    Control0..1
                                    TypeReference(Organization)
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    208. Patient.identifier:SSNIdentifier
                                    Slice NameSSNIdentifier
                                    Definition

                                    An identifier for this patient.

                                    Short(USCDI) An identifier for this patient
                                    NoteThis is a business identifier, not a resource identifier (see discussion)
                                    Control0..1
                                    TypeIdentifier
                                    Is Modifierfalse
                                    Must Supporttrue
                                    Summarytrue
                                    Requirements

                                    Patients are almost always assigned specific numerical identifiers.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    210. Patient.identifier:SSNIdentifier.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    212. Patient.identifier:SSNIdentifier.extension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    ShortAdditional content defined by implementations
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                    • value @ url
                                    • 214. Patient.identifier:SSNIdentifier.use
                                      Definition

                                      The purpose of this identifier.

                                      Shortusual | official | temp | secondary | old (If known)
                                      Comments

                                      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                                      Control0..1
                                      BindingThe codes SHALL be taken from IdentifierUse
                                      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                                      Identifies the purpose for this identifier, if known .

                                      Typecode
                                      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      216. Patient.identifier:SSNIdentifier.type
                                      Definition

                                      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                                      ShortDescription of identifier
                                      Comments

                                      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                                      Control1..1
                                      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                                      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                                      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                                      TypeCodeableConcept
                                      Is Modifierfalse
                                      Must Supporttrue
                                      Summarytrue
                                      Requirements

                                      Allows users to make use of identifiers when the identifier system is not known.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      218. Patient.identifier:SSNIdentifier.type.id
                                      Definition

                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                      ShortUnique id for inter-element referencing
                                      Control0..1
                                      Typestring
                                      Is Modifierfalse
                                      XML FormatIn the XML format, this property is represented as an attribute.
                                      Summaryfalse
                                      220. Patient.identifier:SSNIdentifier.type.extension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                      ShortAdditional content defined by implementations
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifierfalse
                                      Summaryfalse
                                      Alternate Namesextensions, user content
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      SlicingThis element introduces a set of slices on Patient.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                      • value @ url
                                      • 222. Patient.identifier:SSNIdentifier.type.coding
                                        Definition

                                        A reference to a code defined by a terminology system.

                                        ShortCode defined by a terminology system
                                        Comments

                                        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                        Control1..1
                                        TypeCoding
                                        Is Modifierfalse
                                        Must Supporttrue
                                        Summarytrue
                                        Requirements

                                        Allows for alternative encodings within a code system, and translations to other code systems.

                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        224. Patient.identifier:SSNIdentifier.type.coding.id
                                        Definition

                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                        ShortUnique id for inter-element referencing
                                        Control0..1
                                        Typestring
                                        Is Modifierfalse
                                        XML FormatIn the XML format, this property is represented as an attribute.
                                        Summaryfalse
                                        226. Patient.identifier:SSNIdentifier.type.coding.extension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                        ShortAdditional content defined by implementations
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifierfalse
                                        Summaryfalse
                                        Alternate Namesextensions, user content
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        SlicingThis element introduces a set of slices on Patient.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                        • value @ url
                                        • 228. Patient.identifier:SSNIdentifier.type.coding.system
                                          Definition

                                          The identification of the code system that defines the meaning of the symbol in the code.

                                          ShortIdentity of the terminology system
                                          Comments

                                          The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                                          Control1..1
                                          Typeuri
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Requirements

                                          Need to be unambiguous about the source of the definition of the symbol.

                                          Fixed Valuehttp://terminology.hl7.org/CodeSystem/v2-0203
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          230. Patient.identifier:SSNIdentifier.type.coding.version
                                          Definition

                                          The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                          ShortVersion of the system - if relevant
                                          Comments

                                          Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                          NoteThis is a business version Id, not a resource version Id (see discussion)
                                          Control0..1
                                          Typestring
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          232. Patient.identifier:SSNIdentifier.type.coding.code
                                          Definition

                                          A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                          ShortSymbol in syntax defined by the system
                                          Control1..1
                                          Typecode
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Requirements

                                          Need to refer to a particular code in the system.

                                          Fixed ValueSB
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          234. Patient.identifier:SSNIdentifier.type.coding.display
                                          Definition

                                          A representation of the meaning of the code in the system, following the rules of the system.

                                          ShortRepresentation defined by the system
                                          Control0..1
                                          Typestring
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summarytrue
                                          Requirements

                                          Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          236. Patient.identifier:SSNIdentifier.type.coding.userSelected
                                          Definition

                                          Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                          ShortIf this coding was chosen directly by the user
                                          Comments

                                          Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                          Control0..1
                                          Typeboolean
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summarytrue
                                          Requirements

                                          This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          238. Patient.identifier:SSNIdentifier.type.text
                                          Definition

                                          A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                          ShortPlain text representation of the concept
                                          Comments

                                          Very often the text is the same as a displayName of one of the codings.

                                          Control0..1
                                          Typestring
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summarytrue
                                          Requirements

                                          The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          240. Patient.identifier:SSNIdentifier.system
                                          Definition

                                          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                                          Short(USCDI) The namespace for the identifier value
                                          Comments

                                          Identifier.system is always case sensitive.

                                          Control1..1
                                          Typeuri
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Requirements

                                          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                                          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          242. Patient.identifier:SSNIdentifier.value
                                          Definition

                                          The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                                          Short(USCDI) The value that is unique within the system.
                                          Comments

                                          If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                                          Control1..1
                                          Typestring
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supporttrue
                                          Summarytrue
                                          Example<br/><b>General</b>:123456
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          244. Patient.identifier:SSNIdentifier.period
                                          Definition

                                          Time period during which identifier is/was valid for use.

                                          ShortTime period when id is/was valid for use
                                          Control0..1
                                          TypePeriod
                                          Is Modifierfalse
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          246. Patient.identifier:SSNIdentifier.assigner
                                          Definition

                                          Organization that issued/manages the identifier.

                                          ShortOrganization that issued id (may be just text)
                                          Comments

                                          The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                                          Control0..1
                                          TypeReference(Organization)
                                          Is Modifierfalse
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          248. Patient.active
                                          Definition

                                          Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

                                          It is often used to filter patient lists to exclude inactive patients

                                          Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

                                          ShortWhether this patient's record is in active use
                                          Comments

                                          If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

                                          Control0..1
                                          Typeboolean
                                          Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summarytrue
                                          Requirements

                                          Need to be able to mark a patient record as not to be used because it was created in error.

                                          Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          250. Patient.name
                                          Definition

                                          A name associated with the individual.

                                          Short(USCDI) A name associated with the patient
                                          Comments

                                          A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

                                          Control1..*
                                          TypeHumanName
                                          Is Modifierfalse
                                          Must Supporttrue
                                          Summarytrue
                                          Requirements

                                          Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          us-core-6: At least name.given and/or name.family are present or, if neither is available, the Data Absent Reason Extension is present. ((family.exists() or given.exists()) xor extension.where(url='http://hl7.org/fhir/StructureDefinition/data-absent-reason').exists())
                                          252. Patient.name.id
                                          Definition

                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                          ShortUnique id for inter-element referencing
                                          Control0..1
                                          Typestring
                                          Is Modifierfalse
                                          XML FormatIn the XML format, this property is represented as an attribute.
                                          Summaryfalse
                                          254. Patient.name.extension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                          ShortAdditional content defined by implementations
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifierfalse
                                          Summaryfalse
                                          Alternate Namesextensions, user content
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          SlicingThis element introduces a set of slices on Patient.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                          • value @ url
                                          • 256. Patient.name.use
                                            Definition

                                            Identifies the purpose for this name.

                                            Short(USCDI) usual | official | temp | nickname | anonymous | old | maiden
                                            Comments

                                            Applications can assume that a name is current unless it explicitly says that it is temporary or old.

                                            Control0..1
                                            BindingThe codes SHALL be taken from NameUse
                                            (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

                                            The use of a human name.

                                            Typecode
                                            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Requirements

                                            Allows the appropriate name for a particular context of use to be selected from among a set of names.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            258. Patient.name.text
                                            Definition

                                            Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

                                            ShortText representation of the full name
                                            Comments

                                            Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                                            Control0..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Requirements

                                            A renderable, unencoded form.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            260. Patient.name.family
                                            Definition

                                            The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

                                            Short(USCDI) Family name (often called 'Surname')
                                            Comments

                                            Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

                                            Control0..1
                                            This element is affected by the following invariants: us-core-6
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Alternate Namessurname
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            262. Patient.name.given
                                            Definition

                                            Given name.

                                            Short(USCDI) Given names (not always 'first'). Includes middle names
                                            Comments

                                            If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

                                            Control0..*
                                            This element is affected by the following invariants: us-core-6
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Alternate Namesfirst name, middle name
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            264. Patient.name.prefix
                                            Definition

                                            Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

                                            ShortParts that come before the name
                                            Control0..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            266. Patient.name.suffix
                                            Definition

                                            Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

                                            Short(USCDI) Parts that come after the name
                                            Control0..*
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Must Supporttrue
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            268. Patient.name.period
                                            Definition

                                            Indicates the period of time when this name was valid for the named person.

                                            Short(USCDI) Time period when name was/is in use
                                            Control0..1
                                            TypePeriod
                                            Is Modifierfalse
                                            Must Supportfalse
                                            Summarytrue
                                            Requirements

                                            Allows names to be placed in historical context.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            270. Patient.telecom
                                            Definition

                                            A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

                                            Short(USCDI) A contact detail for the individual
                                            Comments

                                            A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

                                            Control0..*
                                            TypeContactPoint
                                            Is Modifierfalse
                                            Must Supportfalse
                                            Summarytrue
                                            Requirements

                                            People have (primary) ways to contact them in some way such as phone, email.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            272. Patient.telecom.id
                                            Definition

                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                            ShortUnique id for inter-element referencing
                                            Control0..1
                                            Typestring
                                            Is Modifierfalse
                                            XML FormatIn the XML format, this property is represented as an attribute.
                                            Summaryfalse
                                            274. Patient.telecom.extension
                                            Definition

                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                            ShortAdditional content defined by implementations
                                            Comments

                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                            Control0..*
                                            TypeExtension
                                            Is Modifierfalse
                                            Summaryfalse
                                            Alternate Namesextensions, user content
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            SlicingThis element introduces a set of slices on Patient.telecom.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                            • value @ url
                                            • 276. Patient.telecom.system
                                              Definition

                                              Telecommunications form for contact point - what communications system is required to make use of the contact.

                                              Short(USCDI) phone | fax | email | pager | url | sms | other
                                              Control1..1
                                              This element is affected by the following invariants: cpt-2
                                              BindingThe codes SHALL be taken from ContactPointSystem
                                              (required to http://hl7.org/fhir/ValueSet/contact-point-system)

                                              Telecommunications form for contact point.

                                              Typecode
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              278. Patient.telecom.value
                                              Definition

                                              The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

                                              Short(USCDI) The actual contact point details
                                              Comments

                                              Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

                                              Control1..1
                                              Typestring
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Requirements

                                              Need to support legacy numbers that are not in a tightly controlled format.

                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              280. Patient.telecom.use
                                              Definition

                                              Identifies the purpose for the contact point.

                                              Short(USCDI) home | work | temp | old | mobile - purpose of this contact point
                                              Comments

                                              Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

                                              Control0..1
                                              BindingThe codes SHALL be taken from ContactPointUse
                                              (required to http://hl7.org/fhir/ValueSet/contact-point-use)
                                              Typecode
                                              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Requirements

                                              Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              282. Patient.telecom.rank
                                              Definition

                                              Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

                                              ShortSpecify preferred order of use (1 = highest)
                                              Comments

                                              Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

                                              Control0..1
                                              TypepositiveInt
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              284. Patient.telecom.period
                                              Definition

                                              Time period when the contact point was/is in use.

                                              ShortTime period when the contact point was/is in use
                                              Control0..1
                                              TypePeriod
                                              Is Modifierfalse
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              286. Patient.gender
                                              Definition

                                              Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

                                              Short(USCDI) male | female | other | unknown
                                              Comments

                                              The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

                                              Control1..1
                                              BindingThe codes SHALL be taken from AdministrativeGender
                                              (required to http://hl7.org/fhir/ValueSet/administrative-gender)
                                              Typecode
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Requirements

                                              Needed for identification of the individual, in combination with (at least) name and birth date.

                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              288. Patient.birthDate
                                              Definition

                                              The date of birth for the individual.

                                              Short(USCDI) The date of birth for the individual
                                              Comments

                                              At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

                                              Control0..1
                                              Typedate
                                              Is Modifierfalse
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Must Supporttrue
                                              Summarytrue
                                              Requirements

                                              Age of the individual drives many clinical processes.

                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              LOINC Code21112-8
                                              290. Patient.deceased[x]
                                              Definition

                                              Indicates if the individual is deceased or not.

                                              Short(USCDI) Indicates if the individual is deceased or not
                                              Comments

                                              If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                                              Control0..1
                                              TypeChoice of: boolean, dateTime
                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                              Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Summarytrue
                                              Requirements

                                              The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              292. Patient.address
                                              Definition

                                              An address for the individual.

                                              Short(USCDI) An address for the individual
                                              Comments

                                              Patient may have multiple addresses with different uses or applicable periods.

                                              Control0..*
                                              TypeAddress
                                              Is Modifierfalse
                                              Must Supporttrue
                                              Summarytrue
                                              Requirements

                                              May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              294. Patient.address.id
                                              Definition

                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                              ShortUnique id for inter-element referencing
                                              Control0..1
                                              Typestring
                                              Is Modifierfalse
                                              XML FormatIn the XML format, this property is represented as an attribute.
                                              Summaryfalse
                                              296. Patient.address.extension
                                              Definition

                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                              ShortAdditional content defined by implementations
                                              Comments

                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                              Control0..*
                                              TypeExtension
                                              Is Modifierfalse
                                              Summaryfalse
                                              Alternate Namesextensions, user content
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              SlicingThis element introduces a set of slices on Patient.address.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                              • value @ url
                                              • 298. Patient.address.use
                                                Definition

                                                The purpose of this address.

                                                Short(USCDI) home | work | temp | old | billing - purpose of this address
                                                Comments

                                                Applications can assume that an address is current unless it explicitly says that it is temporary or old.

                                                Control0..1
                                                BindingThe codes SHALL be taken from AddressUse
                                                (required to http://hl7.org/fhir/ValueSet/address-use|4.0.1)

                                                The use of an address.

                                                Typecode
                                                Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Requirements

                                                Allows an appropriate address to be chosen from a list of many.

                                                Example<br/><b>General</b>:home
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                300. Patient.address.type
                                                Definition

                                                Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

                                                Shortpostal | physical | both
                                                Comments

                                                The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).

                                                Control0..1
                                                BindingThe codes SHALL be taken from AddressType
                                                (required to http://hl7.org/fhir/ValueSet/address-type|4.0.1)

                                                The type of an address (physical / postal).

                                                Typecode
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Example<br/><b>General</b>:both
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                302. Patient.address.text
                                                Definition

                                                Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.

                                                ShortText representation of the address
                                                Comments

                                                Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Requirements

                                                A renderable, unencoded form.

                                                Example<br/><b>General</b>:137 Nowhere Street, Erewhon 9132
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                304. Patient.address.line
                                                Definition

                                                This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

                                                Short(USCDI) Street name, number, direction & P.O. Box etc.
                                                Control0..*
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Example<br/><b>General</b>:137 Nowhere Street
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                306. Patient.address.city
                                                Definition

                                                The name of the city, town, suburb, village or other community or delivery center.

                                                Short(USCDI) Name of city, town etc.
                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Alternate NamesMunicpality
                                                Example<br/><b>General</b>:Erewhon
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                308. Patient.address.district
                                                Definition

                                                The name of the administrative area (county).

                                                ShortDistrict name (aka county)
                                                Comments

                                                District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Alternate NamesCounty
                                                Example<br/><b>General</b>:Madison
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                310. Patient.address.state
                                                Definition

                                                Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

                                                Short(USCDI) Sub-unit of country (abbreviations ok)
                                                Control0..1
                                                BindingUnless not suitable, these codes SHALL be taken from USPS Two Letter Alphabetic Codes
                                                (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state)

                                                Two Letter USPS alphabetic codes.

                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Alternate NamesProvince, Territory
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                312. Patient.address.postalCode
                                                Definition

                                                A postal code designating a region defined by the postal service.

                                                Short(USCDI) US Zip Codes
                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Alternate NamesZip, Zip Code
                                                Example<br/><b>General</b>:9132
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                314. Patient.address.country
                                                Definition

                                                Country - a nation as commonly understood or generally accepted.

                                                ShortCountry (e.g. can be ISO 3166 2 or 3 letter code)
                                                Comments

                                                ISO 3166 3 letter codes can be used in place of a human readable country name.

                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Must Supporttrue
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                316. Patient.address.period
                                                Definition

                                                Time period when address was/is in use.

                                                Short(USCDI) Time period when address was/is in use
                                                Control0..1
                                                TypePeriod
                                                Is Modifierfalse
                                                Summarytrue
                                                Requirements

                                                Allows addresses to be placed in historical context.

                                                Example<br/><b>General</b>:{ "start" : "2010-03-23", "end" : "2010-07-01" }
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                318. Patient.maritalStatus
                                                Definition

                                                This field contains a patient's most recent marital (civil) status.

                                                ShortMarital (civil) status of a patient
                                                Control0..1
                                                BindingUnless not suitable, these codes SHALL be taken from Marital Status Codes
                                                (extensible to http://hl7.org/fhir/ValueSet/marital-status)

                                                The domestic partnership status of a person.

                                                TypeCodeableConcept
                                                Is Modifierfalse
                                                Summaryfalse
                                                Requirements

                                                Most, if not all systems capture it.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                320. Patient.multipleBirth[x]
                                                Definition

                                                Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

                                                ShortWhether patient is part of a multiple birth
                                                Comments

                                                Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

                                                Control0..1
                                                TypeChoice of: boolean, integer
                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summaryfalse
                                                Requirements

                                                For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                322. Patient.photo
                                                Definition

                                                Image of the patient.

                                                ShortImage of the patient
                                                Comments

                                                Guidelines:

                                                • Use id photos, not clinical photos.
                                                • Limit dimensions to thumbnail.
                                                • Keep byte count low to ease resource updates.
                                                Control0..*
                                                TypeAttachment
                                                Is Modifierfalse
                                                Summaryfalse
                                                Requirements

                                                Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                324. Patient.contact
                                                Definition

                                                A contact party (e.g. guardian, partner, friend) for the patient.

                                                ShortA contact party (e.g. guardian, partner, friend) for the patient
                                                Comments

                                                Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

                                                Control0..*
                                                TypeBackboneElement
                                                Is Modifierfalse
                                                Summaryfalse
                                                Requirements

                                                Need to track people you can contact about the patient.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
                                                326. Patient.contact.id
                                                Definition

                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                ShortUnique id for inter-element referencing
                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                Summaryfalse
                                                328. Patient.contact.extension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                ShortAdditional content defined by implementations
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifierfalse
                                                Summaryfalse
                                                Alternate Namesextensions, user content
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                330. Patient.contact.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                332. Patient.contact.relationship
                                                Definition

                                                The nature of the relationship between the patient and the contact person.

                                                ShortThe kind of relationship
                                                Control0..*
                                                BindingUnless not suitable, these codes SHALL be taken from PatientContactRelationship
                                                (extensible to http://hl7.org/fhir/ValueSet/patient-contactrelationship)

                                                The nature of the relationship between a patient and a contact person for that patient.

                                                TypeCodeableConcept
                                                Is Modifierfalse
                                                Summaryfalse
                                                Requirements

                                                Used to determine which contact person is the most relevant to approach, depending on circumstances.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                334. Patient.contact.name
                                                Definition

                                                A name associated with the contact person.

                                                ShortA name associated with the contact person
                                                Control0..1
                                                TypeHumanName
                                                Is Modifierfalse
                                                Summaryfalse
                                                Requirements

                                                Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                336. Patient.contact.telecom
                                                Definition

                                                A contact detail for the person, e.g. a telephone number or an email address.

                                                ShortA contact detail for the person
                                                Comments

                                                Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

                                                Control0..*
                                                TypeContactPoint
                                                Is Modifierfalse
                                                Summaryfalse
                                                Requirements

                                                People have (primary) ways to contact them in some way such as phone, email.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                338. Patient.contact.address
                                                Definition

                                                Address for the contact person.

                                                ShortAddress for the contact person
                                                Control0..1
                                                TypeAddress
                                                Is Modifierfalse
                                                Summaryfalse
                                                Requirements

                                                Need to keep track where the contact person can be contacted per postal mail or visited.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                340. Patient.contact.gender
                                                Definition

                                                Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

                                                Shortmale | female | other | unknown
                                                Control0..1
                                                BindingThe codes SHALL be taken from AdministrativeGender
                                                (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                                                The gender of a person used for administrative purposes.

                                                Typecode
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summaryfalse
                                                Requirements

                                                Needed to address the person correctly.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                342. Patient.contact.organization
                                                Definition

                                                Organization on behalf of which the contact is acting or for which the contact is working.

                                                ShortOrganization that is associated with the contact
                                                Control0..1
                                                This element is affected by the following invariants: pat-1
                                                TypeReference(Organization)
                                                Is Modifierfalse
                                                Summaryfalse
                                                Requirements

                                                For guardians or business related contacts, the organization is relevant.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                344. Patient.contact.period
                                                Definition

                                                The period during which this contact person or organization is valid to be contacted relating to this patient.

                                                ShortThe period during which this contact person or organization is valid to be contacted relating to this patient
                                                Control0..1
                                                TypePeriod
                                                Is Modifierfalse
                                                Summaryfalse
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                346. Patient.communication
                                                Definition

                                                A language which may be used to communicate with the patient about his or her health.

                                                Short(USCDI) A language which may be used to communicate with the patient about his or her health
                                                Comments

                                                If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

                                                Control0..*
                                                TypeBackboneElement
                                                Is Modifierfalse
                                                Must Supportfalse
                                                Summaryfalse
                                                Requirements

                                                If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                348. Patient.communication.id
                                                Definition

                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                ShortUnique id for inter-element referencing
                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                Summaryfalse
                                                350. Patient.communication.extension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                ShortAdditional content defined by implementations
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifierfalse
                                                Summaryfalse
                                                Alternate Namesextensions, user content
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                352. Patient.communication.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                354. Patient.communication.language
                                                Definition

                                                The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

                                                Short(USCDI) The language which can be used to communicate with the patient about his or her health
                                                Comments

                                                The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

                                                Control1..1
                                                BindingUnless not suitable, these codes SHALL be taken from Language codes with language and optionally a region modifier
                                                (extensible to http://hl7.org/fhir/us/core/ValueSet/simple-language)
                                                TypeCodeableConcept
                                                Is Modifierfalse
                                                Must Supporttrue
                                                Summaryfalse
                                                Requirements

                                                Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                356. Patient.communication.preferred
                                                Definition

                                                Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

                                                ShortLanguage preference indicator
                                                Comments

                                                This language is specifically identified for communicating healthcare information.

                                                Control0..1
                                                Typeboolean
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summaryfalse
                                                Requirements

                                                People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                358. Patient.generalPractitioner
                                                Definition

                                                Patient's nominated care provider.

                                                ShortPatient's nominated primary care provider
                                                Comments

                                                This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

                                                Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

                                                Control0..*
                                                TypeReference(Organization, Practitioner, PractitionerRole)
                                                Is Modifierfalse
                                                Summaryfalse
                                                Alternate NamescareProvider
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                360. Patient.managingOrganization
                                                Definition

                                                Organization that is the custodian of the patient record.

                                                ShortOrganization that is the custodian of the patient record
                                                Comments

                                                There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

                                                Control0..1
                                                TypeReference(Organization)
                                                Is Modifierfalse
                                                Summarytrue
                                                Requirements

                                                Need to know who recognizes this patient record, manages and updates it.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                362. Patient.link
                                                Definition

                                                Link to another patient resource that concerns the same actual patient.

                                                ShortLink to another patient resource that concerns the same actual person
                                                Comments

                                                There is no assumption that linked patient records have mutual links.

                                                Control0..*
                                                TypeBackboneElement
                                                Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
                                                Summarytrue
                                                Requirements

                                                There are multiple use cases:

                                                • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
                                                • Distribution of patient information across multiple servers.
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                364. Patient.link.id
                                                Definition

                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                ShortUnique id for inter-element referencing
                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                Summaryfalse
                                                366. Patient.link.extension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                ShortAdditional content defined by implementations
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifierfalse
                                                Summaryfalse
                                                Alternate Namesextensions, user content
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                368. Patient.link.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                370. Patient.link.other
                                                Definition

                                                The other patient resource that the link refers to.

                                                ShortThe other patient or related person resource that the link refers to
                                                Comments

                                                Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

                                                Control1..1
                                                TypeReference(Patient, RelatedPerson)
                                                Is Modifierfalse
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                372. Patient.link.type
                                                Definition

                                                The type of link between this patient resource and another patient resource.

                                                Shortreplaced-by | replaces | refer | seealso
                                                Control1..1
                                                BindingThe codes SHALL be taken from LinkType
                                                (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

                                                The type of link between this patient resource and another patient resource.

                                                Typecode
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))