/*
@author: Bryn Rhodes
@description: Common terminologies and functions used in FHIR-based CQL artifacts
*/
library FHIRCommon version '2.0.0-ballot'
using FHIR version '4.0.1'
include FHIRHelpers version '2.0.0-ballot'
codesystem "LOINC": 'http://loinc.org'
codesystem "SNOMEDCT": 'http://snomed.info/sct'
codesystem "ICD10CM": 'http://hl7.org/fhir/sid/icd-10-cm'
codesystem "RoleCode": 'http://terminology.hl7.org/CodeSystem/v3-RoleCode'
codesystem "Diagnosis Role": 'http://terminology.hl7.org/CodeSystem/diagnosis-role'
codesystem "RequestIntent": 'http://terminology.hl7.org/CodeSystem/request-intent'
codesystem "MedicationRequestCategory": 'http://terminology.hl7.org/CodeSystem/medicationrequest-category'
codesystem "ConditionClinicalStatusCodes": 'http://terminology.hl7.org/CodeSystem/condition-clinical'
codesystem "ConditionVerificationStatusCodes": 'http://terminology.hl7.org/CodeSystem/condition-ver-status'
codesystem "AllergyIntoleranceClinicalStatusCodes": 'http://terminology.hl7.org/CodeSystem/allergyintolerance-clinical'
codesystem "AllergyIntoleranceVerificationStatusCodes": 'http://terminology.hl7.org/CodeSystem/allergyintolerance-verification'
codesystem "ConditionCategoryCodes": 'http://terminology.hl7.org/CodeSystem/condition-category'
codesystem "ObservationCategoryCodes": 'http://terminology.hl7.org/CodeSystem/observation-category'
valueset "Active Condition": 'http://fhir.org/guides/cqf/common/ValueSet/active-condition'
valueset "Inactive Condition": 'http://fhir.org/guides/cqf/common/ValueSet/inactive-condition'
code "Birthdate": '21112-8' from "LOINC" display 'Birth date'
code "Dead": '419099009' from "SNOMEDCT" display 'Dead'
code "ER": 'ER' from "RoleCode" display 'Emergency room'
code "ICU": 'ICU' from "RoleCode" display 'Intensive care unit'
code "Billing": 'billing' from "Diagnosis Role" display 'Billing'
// Condition Clinical Status Codes - Consider value sets for these
code "active": 'active' from "ConditionClinicalStatusCodes"
code "recurrence": 'recurrence' from "ConditionClinicalStatusCodes"
code "relapse": 'relapse' from "ConditionClinicalStatusCodes"
code "inactive": 'inactive' from "ConditionClinicalStatusCodes"
code "remission": 'remission' from "ConditionClinicalStatusCodes"
code "resolved": 'resolved' from "ConditionClinicalStatusCodes"
// Condition Verification Status Codes - Consider value sets for these
code "unconfirmed": 'unconfirmed' from ConditionVerificationStatusCodes
code "provisional": 'provisional' from ConditionVerificationStatusCodes
code "differential": 'differential' from ConditionVerificationStatusCodes
code "confirmed": 'confirmed' from ConditionVerificationStatusCodes
code "refuted": 'refuted' from ConditionVerificationStatusCodes
code "entered-in-error": 'entered-in-error' from ConditionVerificationStatusCodes
code "allergy-active": 'active' from "AllergyIntoleranceClinicalStatusCodes"
code "allergy-inactive": 'inactive' from "AllergyIntoleranceClinicalStatusCodes"
code "allergy-resolved": 'resolved' from "AllergyIntoleranceClinicalStatusCodes"
// Allergy/Intolerance Verification Status Codes - Consider value sets for these
code "allergy-unconfirmed": 'unconfirmed' from AllergyIntoleranceVerificationStatusCodes
code "allergy-confirmed": 'confirmed' from AllergyIntoleranceVerificationStatusCodes
code "allergy-refuted": 'refuted' from AllergyIntoleranceVerificationStatusCodes
// MedicationRequest Category Codes
code "Community": 'community' from "MedicationRequestCategory" display 'Community'
code "Discharge": 'discharge' from "MedicationRequestCategory" display 'Discharge'
// Diagnosis Role Codes
code "AD": 'AD' from "Diagnosis Role" display 'Admission diagnosis'
code "DD": 'DD' from "Diagnosis Role" display 'Discharge diagnosis'
code "CC": 'CC' from "Diagnosis Role" display 'Chief complaint'
code "CM": 'CM' from "Diagnosis Role" display 'Comorbidity diagnosis'
code "pre-op": 'pre-op' from "Diagnosis Role" display 'pre-op diagnosis'
code "post-op": 'post-op' from "Diagnosis Role" display 'post-op diagnosis'
code "billing": 'billing' from "Diagnosis Role" display 'billing diagnosis'
// Observation Category Codes
code "social-history": 'social-history' from "ObservationCategoryCodes" display 'Social History'
code "vital-signs": 'vital-signs' from "ObservationCategoryCodes" display 'Vital Signs'
code "imaging": 'imaging' from "ObservationCategoryCodes" display 'Imaging'
code "laboratory": 'laboratory' from "ObservationCategoryCodes" display 'Laboratory'
code "procedure": 'procedure' from "ObservationCategoryCodes" display 'Procedure'
code "survey": 'survey' from "ObservationCategoryCodes" display 'Survey'
code "exam": 'exam' from "ObservationCategoryCodes" display 'Exam'
code "therapy": 'therapy' from "ObservationCategoryCodes" display 'Therapy'
code "activity": 'activity' from "ObservationCategoryCodes" display 'Activity'
// Condition Category Codes
code "problem-list-item": 'problem-list-item' from "ConditionCategoryCodes" display 'Problem List Item'
code "encounter-diagnosis": 'encounter-diagnosis' from "ConditionCategoryCodes" display 'Encounter Diagnosis'
context Patient
/*
@description: Normalizes a value that is a choice of timing-valued types to an equivalent interval
@comment: Normalizes a choice type of FHIR.dateTime, FHIR.Period, FHIR.Timing, FHIR.instance, FHIR.string, FHIR.Age, or FHIR.Range types
to an equivalent interval. This selection of choice types is a superset of the majority of choice types that are used as possible
representations for timing-valued elements in FHIR, allowing this function to be used across any resource.
The input can be provided as a dateTime, Period, Timing, instant, string, Age, or Range.
The intent of this function is to provide a clear and concise mechanism to treat single
elements that have multiple possible representations as intervals so that logic doesn't have to account
for the variability. More complex calculations (such as medication request period or dispense period
calculation) need specific guidance and consideration. That guidance may make use of this function, but
the focus of this function is on single element calculations where the semantics are unambiguous.
If the input is a dateTime, the result a DateTime Interval beginning and ending on that dateTime.
If the input is a Period, the result is a DateTime Interval.
If the input is a Timing, an error is raised indicating a single interval cannot be computed from a Timing.
If the input is an instant, the result is a DateTime Interval beginning and ending on that instant.
If the input is a string, an error is raised indicating a single interval cannot be computed from a string.
If the input is an Age, the result is a DateTime Interval beginning when the patient was the given Age,
and ending immediately prior to when the patient was the given Age plus one year.
If the input is a Range, the result is a DateTime Interval beginning when the patient was the Age given
by the low end of the Range, and ending immediately prior to when the patient was the Age given by the
high end of the Range plus one year.
NOTE: Due to the
complexity of determining a single interval from a Timing or String type, this function will throw a run-time exception if it is used
with a Timing or String.
@deprecated: This function is deprecated. Use the fluent function `toInterval()` instead
*/
define function ToInterval(choice Choice<FHIR.dateTime, FHIR.Period, FHIR.Timing, FHIR.instant, FHIR.string, FHIR.Age, FHIR.Range>):
case
when choice is FHIR.dateTime then
Interval[FHIRHelpers.ToDateTime(choice as FHIR.dateTime), FHIRHelpers.ToDateTime(choice as FHIR.dateTime)]
when choice is FHIR.Period then
FHIRHelpers.ToInterval(choice as FHIR.Period)
when choice is FHIR.instant then
Interval[FHIRHelpers.ToDateTime(choice as FHIR.instant), FHIRHelpers.ToDateTime(choice as FHIR.instant)]
when choice is FHIR.Age then
Interval[FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity(choice as FHIR.Age),
FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity(choice as FHIR.Age) + 1 year)
when choice is FHIR.Range then
Interval[FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity((choice as FHIR.Range).low),
FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity((choice as FHIR.Range).high) + 1 year)
when choice is FHIR.Timing then
Message(null as Interval<DateTime>, true, 'NOT_IMPLEMENTED', 'Error', 'Calculation of an interval from a Timing value is not supported')
when choice is FHIR.string then
Message(null as Interval<DateTime>, true, 'NOT_IMPLEMENTED', 'Error', 'Calculation of an interval from a String value is not supported')
else
null as Interval<DateTime>
end
/*
@description: Normalizes a value that is a choice of timing-valued types to an equivalent interval
@comment: Normalizes a choice type of FHIR.dateTime, FHIR.Period, FHIR.Timing, FHIR.instance, FHIR.string, FHIR.Age, or FHIR.Range types
to an equivalent interval. This selection of choice types is a superset of the majority of choice types that are used as possible
representations for timing-valued elements in FHIR, allowing this function to be used across any resource.
The input can be provided as a dateTime, Period, Timing, instant, string, Age, or Range.
The intent of this function is to provide a clear and concise mechanism to treat single
elements that have multiple possible representations as intervals so that logic doesn't have to account
for the variability. More complex calculations (such as medication request period or dispense period
calculation) need specific guidance and consideration. That guidance may make use of this function, but
the focus of this function is on single element calculations where the semantics are unambiguous.
If the input is a dateTime, the result a DateTime Interval beginning and ending on that dateTime.
If the input is a Period, the result is a DateTime Interval.
If the input is a Timing, an error is raised indicating a single interval cannot be computed from a Timing.
If the input is an instant, the result is a DateTime Interval beginning and ending on that instant.
If the input is a string, an error is raised indicating a single interval cannot be computed from a string.
If the input is an Age, the result is a DateTime Interval beginning when the patient was the given Age,
and ending immediately prior to when the patient was the given Age plus one year.
If the input is a Range, the result is a DateTime Interval beginning when the patient was the Age given
by the low end of the Range, and ending immediately prior to when the patient was the Age given by the
high end of the Range plus one year.
NOTE: Due to the
complexity of determining a single interval from a Timing or String type, this function will throw a run-time exception if it is used
with a Timing or String.
*/
define fluent function toInterval(choice Choice<FHIR.dateTime, FHIR.Period, FHIR.Timing, FHIR.instant, FHIR.string, FHIR.Age, FHIR.Range>):
case
when choice is FHIR.dateTime then
Interval[FHIRHelpers.ToDateTime(choice as FHIR.dateTime), FHIRHelpers.ToDateTime(choice as FHIR.dateTime)]
when choice is FHIR.Period then
FHIRHelpers.ToInterval(choice as FHIR.Period)
when choice is FHIR.instant then
Interval[FHIRHelpers.ToDateTime(choice as FHIR.instant), FHIRHelpers.ToDateTime(choice as FHIR.instant)]
when choice is FHIR.Age then
Interval[FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity(choice as FHIR.Age),
FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity(choice as FHIR.Age) + 1 year)
when choice is FHIR.Range then
Interval[FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity((choice as FHIR.Range).low),
FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity((choice as FHIR.Range).high) + 1 year)
when choice is FHIR.Timing then
Message(null as Interval<DateTime>, true, 'NOT_IMPLEMENTED', 'Error', 'Calculation of an interval from a Timing value is not supported')
when choice is FHIR.string then
Message(null as Interval<DateTime>, true, 'NOT_IMPLEMENTED', 'Error', 'Calculation of an interval from a String value is not supported')
else
null as Interval<DateTime>
end
/*
@description: Returns an interval representing the normalized Abatement of a given Condition resource.
@comment: NOTE: Due to the complexity of determining an interval from a String, this function will throw
a run-time exception if used with a Condition instance that has a String as the abatement value.
@deprecated: This function is deprecated. Use the fluent function `abatementInterval()` instead.
*/
define function ToAbatementInterval(condition Condition):
if condition.abatement is FHIR.dateTime then
Interval[FHIRHelpers.ToDateTime(condition.abatement as FHIR.dateTime), FHIRHelpers.ToDateTime(condition.abatement as FHIR.dateTime)]
else if condition.abatement is FHIR.Period then
FHIRHelpers.ToInterval(condition.abatement as FHIR.Period)
else if condition.abatement is FHIR.string then
Message(null as Interval<DateTime>, true, 'NOT_IMPLEMENTED', 'Error', 'Calculation of an interval from a String value is not supported')
else if condition.abatement is FHIR.Age then
Interval[FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity(condition.abatement as FHIR.Age),
FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity(condition.abatement as FHIR.Age) + 1 year)
else if condition.abatement is FHIR.Range then
Interval[FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity((condition.abatement as FHIR.Range).low),
FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity((condition.abatement as FHIR.Range).high) + 1 year)
else if condition.abatement is FHIR.boolean then
Interval[end of ToInterval(condition.onset), condition.recordedDate)
else
null
/*
@description: Returns an interval representing the normalized Abatement of a given Condition resource.
@comment: NOTE: Due to the complexity of determining an interval from a String, this function will throw
a run-time exception if used with a Condition instance that has a String as the abatement value.
*/
define fluent function abatementInterval(condition Condition):
if condition.abatement is FHIR.dateTime then
Interval[FHIRHelpers.ToDateTime(condition.abatement as FHIR.dateTime), FHIRHelpers.ToDateTime(condition.abatement as FHIR.dateTime)]
else if condition.abatement is FHIR.Period then
FHIRHelpers.ToInterval(condition.abatement as FHIR.Period)
else if condition.abatement is FHIR.string then
Message(null as Interval<DateTime>, true, 'NOT_IMPLEMENTED', 'Error', 'Calculation of an interval from a String value is not supported')
else if condition.abatement is FHIR.Age then
Interval[FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity(condition.abatement as FHIR.Age),
FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity(condition.abatement as FHIR.Age) + 1 year)
else if condition.abatement is FHIR.Range then
Interval[FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity((condition.abatement as FHIR.Range).low),
FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity((condition.abatement as FHIR.Range).high) + 1 year)
else if condition.abatement is FHIR.boolean then
Interval[end of ToInterval(condition.onset), condition.recordedDate)
else
null
/*
@description: Returns an interval representing the normalized prevalence period of a given Condition resource.
@comment: Uses the ToInterval and ToAbatementInterval functions to determine the widest potential interval from
onset to abatement as specified in the given Condition.
@deprecated: This function is deprecated. Use the `prevalenceInterval()` fluent function instead
*/
define function ToPrevalenceInterval(condition Condition):
if condition.clinicalStatus ~ "active"
or condition.clinicalStatus ~ "recurrence"
or condition.clinicalStatus ~ "relapse" then
Interval[start of ToInterval(condition.onset), end of ToAbatementInterval(condition)]
else
(end of ToAbatementInterval(condition)) abatementDate
return
if abatementDate is null then
Interval[start of ToInterval(condition.onset), abatementDate)
else
Interval[start of ToInterval(condition.onset), abatementDate]
/*
@description: Returns an interval representing the normalized prevalence period of a given Condition resource.
@comment: Uses the toInterval and toAbatementInterval functions to determine the widest potential interval from
onset to abatement as specified in the given Condition.
*/
define fluent function prevalenceInterval(condition Condition):
if condition.clinicalStatus ~ "active"
or condition.clinicalStatus ~ "recurrence"
or condition.clinicalStatus ~ "relapse" then
Interval[start of condition.onset.toInterval(), end of condition.abatementInterval()]
else
(end of condition.abatementInterval()) abatementDate
return
if abatementDate is null then
Interval[start of condition.onset.toInterval(), abatementDate)
else
Interval[start of condition.onset.toInterval(), abatementDate]
/*
@description: Returns true if the given reference is to the given resource
@comment: Returns true if the `id` element of the given resource exactly equals the tail of the given reference.
NOTE: This function assumes resources from the same source server.
*/
define fluent function references(reference FHIR.Reference, resource FHIR.Resource):
resource.id = Last(Split(reference.reference, '/'))
/*
@description: Returns true if the given reference is to the given resourceId
@comment: Returns true if the `resourceId` parameter exactly equals the tail of the given reference.
NOTE: This function assumes resources from the same source server.
*/
define fluent function references(reference FHIR.Reference, resourceId String):
resourceId = Last(Split(reference.reference, '/'))
/*
@description: Returns true if any of the given references are to the given resource
@comment: Returns true if the `id` element of the given resource exactly equals the tail of any of the given references.
NOTE: This function assumes resources from the same source server.
*/
define fluent function references(references List<FHIR.Reference>, resource FHIR.Resource):
exists (references R where R.references(resource))
/*
@description: Returns true if any of the given references are to the given resourceId
@comment: Returns true if the `resourceId` parameter exactly equals the tail of any of the given references.
NOTE: This function assumes resources from the same source server.
*/
define fluent function references(references List<FHIR.Reference>, resourceId String):
exists (references R where R.references(resourceId))
/*
@description: Returns any extensions defined on the given resource with the specified url.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the
CQL model info.
@deprecated: This function is deprecated. Use the `extensions()` fluent function instead
*/
define function Extensions(domainResource DomainResource, url String):
domainResource.extension E
where E.url = url
return E
/*
@description: Returns any extensions defined on the given resource with the specified url.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the
CQL model info.
*/
define fluent function extensions(domainResource DomainResource, url String):
domainResource.extension E
where E.url = url
return E
/*
@description: Returns the single extension (if present) on the given resource with the specified url.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
@deprecated: This function is deprecated. Use the `extension()` fluent function instead
*/
define function Extension(domainResource DomainResource, url String):
singleton from "Extensions"(domainResource, url)
/*
@description: Returns the single extension (if present) on the given resource with the specified url.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
*/
define fluent function extension(domainResource DomainResource, url String):
singleton from "Extensions"(domainResource, url)
/*
@description: Returns any extensions defined on the given element with the specified url.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
@deprecated: This function is deprecated. Use the `extensions()` fluent function instead
*/
define function Extensions(element Element, url String):
element.extension E
where E.url = url
return E
/*
@description: Returns any extensions defined on the given element with the specified url.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
*/
define fluent function extensions(element Element, url String):
element.extension E
where E.url = url
return E
/*
@description: Returns the single extension (if present) on the given element with the specified url.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
@deprecated: This function is deprecated. Use the `extension()` fluent function instead
*/
define function Extension(element Element, url String):
singleton from Extensions(element, url)
/*
@description: Returns the single extension (if present) on the given element with the specified url.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
*/
define fluent function extension(element Element, url String):
singleton from Extensions(element, url)
/*
@description: Returns any modifier extensions defined on the given resource with the specified url.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the
CQL model info.
@deprecated: This function is deprecated. Use the `modifierExtensions()` fluent function instead
*/
define function ModifierExtensions(domainResource DomainResource, url String):
domainResource.modifierExtension E
where E.url = url
return E
/*
@description: Returns any modifier extensions defined on the given resource with the specified url.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the
CQL model info.
*/
define fluent function modifierExtensions(domainResource DomainResource, url String):
domainResource.modifierExtension E
where E.url = url
return E
/*
@description: Returns the single modifier extension (if present) on the given resource with the specified url.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
@deprecated: This function is deprecated. Use the `modifierExtension()` fluent function instead
*/
define function ModifierExtension(domainResource DomainResource, url String):
singleton from ModifierExtensions(domainResource, url)
/*
@description: Returns the single modifier extension (if present) on the given resource with the specified url.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
*/
define fluent function modifierExtension(domainResource DomainResource, url String):
singleton from ModifierExtensions(domainResource, url)
/*
@description: Returns any modifier extensions defined on the given element with the specified url.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
@deprecated: This function is deprecated. Use the `modifierExtensions()` fluent function instead
*/
define function ModifierExtensions(element BackboneElement, url String):
element.modifierExtension E
where E.url = url
return E
/*
@description: Returns any modifier extensions defined on the given element with the specified url.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
*/
define fluent function modifierExtensions(element BackboneElement, url String):
element.modifierExtension E
where E.url = url
return E
/*
@description: Returns the single modifier extension (if present) on the given element with the specified url.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
@deprecated: This function is deprecated. Use the `modifierExtension()` fluent function instead
*/
define function ModifierExtension(element BackboneElement, url String):
singleton from ModifierExtensions(element, url)
/*
@description: Returns the single modifier extension (if present) on the given element with the specified url.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
*/
define fluent function modifierExtension(element BackboneElement, url String):
singleton from ModifierExtensions(element, url)
/*
@description: Returns any base-FHIR extensions defined on the given resource with the specified id.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
@deprecated: This function is deprecated. Use the `baseExtension()` fluent function instead
*/
define function BaseExtensions(domainResource DomainResource, id String):
domainResource.extension E
where E.url = ('http://hl7.org/fhir/StructureDefinition/' + id)
return E
/*
@description: Returns any base-FHIR extensions defined on the given resource with the specified id.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
*/
define fluent function baseExtensions(domainResource DomainResource, id String):
domainResource.extension E
where E.url = ('http://hl7.org/fhir/StructureDefinition/' + id)
return E
/*
@description: Returns the single base-FHIR extension (if present) on the given resource with the specified id.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
@deprecated: This function is deprecated. Use the `baseExtension()` fluent function instead
*/
define function BaseExtension(domainResource DomainResource, id String):
singleton from BaseExtensions(domainResource, id)
/*
@description: Returns the single base-FHIR extension (if present) on the given resource with the specified id.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
*/
define fluent function baseExtension(domainResource DomainResource, id String):
singleton from BaseExtensions(domainResource, id)
/*
@description: Returns any base-FHIR extensions defined on the given element with the specified id.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
@deprecated: This function is deprecated. Use the `baseExtensions()` fluent function instead
*/
define function BaseExtensions(element Element, id String):
element.extension E
where E.url = ('http://hl7.org/fhir/StructureDefinition/' + id)
return E
/*
@description: Returns any base-FHIR extensions defined on the given element with the specified id.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
*/
define fluent function baseExtensions(element Element, id String):
element.extension E
where E.url = ('http://hl7.org/fhir/StructureDefinition/' + id)
return E
/*
@description: Returns the single base-FHIR extension (if present) on the given element with the specified id.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
@deprecated: This function is deprecated. Use the `baseExtension()` fluent function instead
*/
define function BaseExtension(element Element, id String):
singleton from BaseExtensions(element, id)
/*
@description: Returns the single base-FHIR extension (if present) on the given element with the specified id.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
*/
define fluent function baseExtension(element Element, id String):
singleton from BaseExtensions(element, id)
/*
@description: Returns any base-FHIR modifier extensions defined on the given resource with the specified id.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
@deprecated: This function is deprecated. Use the `baseModifierExtensions()` fluent function instead
*/
define function BaseModifierExtensions(domainResource DomainResource, id String):
domainResource.modifierExtension E
where E.url = ('http://hl7.org/fhir/StructureDefinition/' + id)
return E
/*
@description: Returns any base-FHIR modifier extensions defined on the given resource with the specified id.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
*/
define fluent function baseModifierExtensions(domainResource DomainResource, id String):
domainResource.modifierExtension E
where E.url = ('http://hl7.org/fhir/StructureDefinition/' + id)
return E
/*
@description: Returns the single base-FHIR modifier extension (if present) on the given resource with the specified id.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
@deprecated: This function is deprecated. Use the `baseModifierExtension()` fluent function instead
*/
define function BaseModifierExtension(domainResource DomainResource, id String):
singleton from BaseModifierExtensions(domainResource, id)
/*
@description: Returns the single base-FHIR modifier extension (if present) on the given resource with the specified id.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
*/
define fluent function baseModifierExtension(domainResource DomainResource, id String):
singleton from BaseModifierExtensions(domainResource, id)
/*
@description: Returns any base-FHIR modifier extensions defined on the given element with the specified id.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
@deprecated: This function is deprecated. Use the `baseModifierExtensions()` fluent function instead
*/
define function BaseModifierExtensions(element BackboneElement, id String):
element.modifierExtension E
where E.url = ('http://hl7.org/fhir/StructureDefinition/' + id)
return E
/*
@description: Returns any base-FHIR modifier extensions defined on the given element with the specified id.
@comment: NOTE: Extensions are not the preferred approach, but are used as a way to access
content that is defined by extensions but not yet surfaced in the CQL model info.
*/
define fluent function baseModifierExtensions(element BackboneElement, id String):
element.modifierExtension E
where E.url = ('http://hl7.org/fhir/StructureDefinition/' + id)
return E
/*
@description: Returns the single base-FHIR extension (if present) on the given element with the specified id.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
@deprecated: This function is deprecated. Use the `baseModifierExtension()` fluent function instead
*/
define function BaseModifierExtension(element BackboneElement, id String):
singleton from BaseModifierExtensions(element, id)
/*
@description: Returns the single base-FHIR extension (if present) on the given element with the specified id.
@comment: This function uses singleton from to ensure that a run-time exception is thrown if there
is more than one extension on the given resource with the specified url.
*/
define fluent function baseModifierExtension(element BackboneElement, id String):
singleton from BaseModifierExtensions(element, id)
|
|
Propose a change