Guías de Implementación HL7 FHIR: CR Core
0.1.1-draft - ci-build Costa Rica flag

Guías de Implementación HL7 FHIR: CR Core, published by Ministerio de Salud de Costa Rica. This guide is not an authorized publication; it is the continuous build for version 0.1.1-draft built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HIE-cr/core-ig/ and changes regularly. See the Directory of published versions

Resource Profile: AuditEventCrCore - Detailed Descriptions

Page standards status: Draft Maturity Level: 0

Definitions for the audit-event-cr-core resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. AuditEvent
Definition

A record of an event relevant for purposes such as operations, privacy, security, maintenance, and performance analysis.

ShortRecord of an event
Comments

Based on IHE-ATNA.

Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. AuditEvent.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. AuditEvent.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. AuditEvent.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. AuditEvent.category
Definition

Tipo de evento de auditoría.


Classification of the type of event.

ShortTipo de evento de auditoría.Type/identifier of event
Control0..*
BindingThe codes SHALL be taken from For example codes, see AuditEventIDhttp://hl7.org/fhir/ValueSet/audit-event-type|5.0.0
(required to http://hl7.org/fhir/ValueSet/audit-event-type)

Eventos de auditoría descritos en FHIR para DICOM


Type of event.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Codes that classify the general type of event that happened.

Alternate Namestype
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. AuditEvent.code
Definition

Subtipo de evento de auditoría.


Describes what happened. The most specific code for the event.

ShortSubtipo de evento de auditoría.Specific type of event
Control1..1
BindingThe codes SHALL be taken from For example codes, see AuditEventSubTypehttp://hl7.org/fhir/ValueSet/audit-event-sub-type|5.0.0
(required to http://hl7.org/fhir/ValueSet/audit-event-sub-type)

Subtipos de eventos de auditoría descritos en FHIR para DICOM


Specific type of event.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

This field enables queries of messages by implementation-defined event categories.

Alternate Namessubtype
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. AuditEvent.action
Definition

Código de la acción


Indicator for type of action performed during the event that generated the audit.

ShortCreate| Read/View/Print | Update | Delete | ExecuteType of action performed during the event
Control0..1
BindingThe codes SHALL be taken from AuditEventActionhttp://hl7.org/fhir/ValueSet/audit-event-action|5.0.0
(required to http://hl7.org/fhir/ValueSet/audit-event-action)

Códigos fijos extraídos de un set de DICOM por FHIR


DICOM Audit Event Action

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

This broadly indicates what kind of action was done on the AuditEvent.entity by the AuditEvent.agent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. AuditEvent.occurred[x]
Definition

Fecha y hora del evento de auditoría.


The time or period during which the activity occurred.

ShortFecha y hora del evento de auditoría.When the activity occurred
Comments

The time or period can be a little arbitrary; where possible, the time should correspond to human assessment of the activity time.

Control0..1
TypeChoice of: Period, dateTime
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. AuditEvent.recorded
Definition

Momento cuando el evento fue almacenado


The time when the event was recorded.

ShortMomento cuando el evento fue almacenadoTime when the event was recorded
Comments

In a distributed system, some sort of common time base (e.g. an NTP [RFC1305] server) is a good implementation tactic.

Control1..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

This ties an event to a specific date and time. Security audits typically require a consistent time base (e.g. UTC), to eliminate time-zone issues arising from geographical distribution.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. AuditEvent.outcome
Definition

Indicates whether the event succeeded or failed. A free text descripiton can be given in outcome.text.

ShortResultado de la operaciónWhether the event succeeded or failed
Comments

In some cases a "success" may be partial, for example, an incomplete or interrupted transfer of a radiological study. For the purpose of establishing accountability, these distinctions are not relevant.

Control0..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

when a code is given there must be one code from the given codeSystem, and may be other equivilant codes from other codeSystems (for example http response codes such as 2xx, 4xx, or 5xx).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. AuditEvent.outcome.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. AuditEvent.outcome.code
Definition

Indicates whether the event succeeded or failed.

ShortWhether the event succeeded or failed
Comments

In some cases a "success" may be partial, for example, an incomplete or interrupted transfer of a radiological study. For the purpose of establishing accountability, these distinctions are not relevant.

Control1..1
BindingThe codes SHALL be taken from The codes SHOULD be taken from AuditEventOutcomehttp://hl7.org/fhir/ValueSet/audit-event-outcome|5.0.0
(required to http://hl7.org/fhir/ValueSet/audit-event-outcome)

Códigos extraídos de DICOM


DICOM Audit Event Outcome

TypeCoding
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

when a code is given there must be one code from the given codeSystem.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. AuditEvent.agent
Definition

Debe indicar quien solicitó del recurso


An actor taking an active role in the event or activity that is logged.

ShortQuienes actuaron en el eventoActor involved in the event
Comments

Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

When a network are used in an event being recorded, there should be distinct agent elements for the known actors using the network. The agent with a network detail would be the responsible agent for use of that network.

Control1..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

Alternate NamesActiveParticipant
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. AuditEvent.agent.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. AuditEvent.agent.who
Definition

Referencia al recurso o Identificación de quien realizó la acción


Reference to who this agent is that was involved in the event.

ShortQuien realizó la acciónIdentifier of who
Comments

Where a User ID is available it will go into who.identifier. Where a name of the user (human readable) it will go into who.display.

Control1..1
TypeReference(Rol de Profesional de la Salud, Profesional de Salud, Organizaciones, Paciente, Practitioner, PractitionerRole, Organization, CareTeam, Patient, Device, RelatedPerson)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

This field ties an audit event to a specific resource or identifier.

Alternate NamesuserId
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. AuditEvent.agent.requestor
Definition

Indicador de si Who es quien solicitó la acción


Indicator that the user is or is not the requestor, or initiator, for the event being audited.

ShortIndicador de si Who es quien solicitó la acciónWhether user is initiator
Comments

There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

Meaning if Missingfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. AuditEvent.agent.network[x]
Definition

Ubicación de red lógica para la actividad de la aplicación, si la actividad tiene una ubicación de red.


When the event utilizes a network there should be an agent describing the local system, and an agent describing remote system, with the network interface details.

ShortUbicación de la Red de la AplicaciónThis agent network location for the activity
Comments

When remote network endpoint is known, another agent representing the remote agent would indicate the remote network endpoint used. Convention is to indicate data flowing from Source to Destination. The convention for Search, given data flows both ways (query parameters vs results), is to have the Source as the initiator of the Search Transaction, and the Destination the responder to the Search transaction.

Control0..1
TypeChoice of: Reference(Endpoint), uri, string
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summaryfalse
Requirements

When a network protocol is used the endpoint is associated with the agent most directly using the endpoint. This is usually the software agent that has implemented the application level protocol. Preference is to define network in terms of a Reference(Endpoint), or URI; use string only when address or hostname is all that is known. When encoding using string it is best to encode using the formal canonical host name, but if you can't, then you can encode numeric in Literal address form using square brackets '[]' as a v4 string (in dotted notation), or v6 string (in colon notation).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AuditEvent.agent.network[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
  • 34. AuditEvent.agent.network[x]:networkReference
    Slice NamenetworkReference
    Definition

    When the event utilizes a network there should be an agent describing the local system, and an agent describing remote system, with the network interface details.

    ShortUbicación de la Red de la Aplicación como ReferenceThis agent network location for the activity
    Comments

    When remote network endpoint is known, another agent representing the remote agent would indicate the remote network endpoint used. Convention is to indicate data flowing from Source to Destination. The convention for Search, given data flows both ways (query parameters vs results), is to have the Source as the initiator of the Search Transaction, and the Destination the responder to the Search transaction.

    Control0..1
    TypeReference(Endpoint, Endpoint), string, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    When a network protocol is used the endpoint is associated with the agent most directly using the endpoint. This is usually the software agent that has implemented the application level protocol. Preference is to define network in terms of a Reference(Endpoint), or URI; use string only when address or hostname is all that is known. When encoding using string it is best to encode using the formal canonical host name, but if you can't, then you can encode numeric in Literal address form using square brackets '[]' as a v4 string (in dotted notation), or v6 string (in colon notation).

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. AuditEvent.agent.network[x]:networkString
    Slice NamenetworkString
    Definition

    When the event utilizes a network there should be an agent describing the local system, and an agent describing remote system, with the network interface details.

    ShortUbicación de la Red de la Aplicación como StringThis agent network location for the activity
    Comments

    When remote network endpoint is known, another agent representing the remote agent would indicate the remote network endpoint used. Convention is to indicate data flowing from Source to Destination. The convention for Search, given data flows both ways (query parameters vs results), is to have the Source as the initiator of the Search Transaction, and the Destination the responder to the Search transaction.

    Control0..1
    Typestring, Reference(Endpoint), uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    When a network protocol is used the endpoint is associated with the agent most directly using the endpoint. This is usually the software agent that has implemented the application level protocol. Preference is to define network in terms of a Reference(Endpoint), or URI; use string only when address or hostname is all that is known. When encoding using string it is best to encode using the formal canonical host name, but if you can't, then you can encode numeric in Literal address form using square brackets '[]' as a v4 string (in dotted notation), or v6 string (in colon notation).

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. AuditEvent.agent.network[x]:networkUri
    Slice NamenetworkUri
    Definition

    When the event utilizes a network there should be an agent describing the local system, and an agent describing remote system, with the network interface details.

    ShortUbicación de la Red de la Aplicación como URIThis agent network location for the activity
    Comments

    When remote network endpoint is known, another agent representing the remote agent would indicate the remote network endpoint used. Convention is to indicate data flowing from Source to Destination. The convention for Search, given data flows both ways (query parameters vs results), is to have the Source as the initiator of the Search Transaction, and the Destination the responder to the Search transaction.

    Control0..1
    Typeuri, string, Reference(Endpoint)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    When a network protocol is used the endpoint is associated with the agent most directly using the endpoint. This is usually the software agent that has implemented the application level protocol. Preference is to define network in terms of a Reference(Endpoint), or URI; use string only when address or hostname is all that is known. When encoding using string it is best to encode using the formal canonical host name, but if you can't, then you can encode numeric in Literal address form using square brackets '[]' as a v4 string (in dotted notation), or v6 string (in colon notation).

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. AuditEvent.source
    Definition

    Sitio en donde se reporta el evento


    The actor that is reporting the event.

    ShortQuien reporta el eventoAudit Event Reporter
    Comments

    Events are reported by the actor that detected them. This may be one of the participating actors, but may also be different. The actor may be a human such as a medical-records clerk disclosing data manually, that clerk would be the source for the record of disclosure.

    Control1..1
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    The event is reported by one source.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. AuditEvent.source.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    44. AuditEvent.source.observer
    Definition

    Identificación del Observador donde se reportó el evento


    Identifier of the source where the event was detected.

    ShortEntidad que reporta el eventoThe identity of source detecting the event
    Control1..1
    TypeReference(Rol de Profesional de la Salud, Profesional de Salud, Organizaciones, Paciente, Practitioner, PractitionerRole, Organization, CareTeam, Patient, Device, RelatedPerson)
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summarytrue
    Requirements

    This field ties the event to a specific source system. It may be used to group events for analysis according to where the event was detected.

    Alternate NamesSourceId
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. AuditEvent.entity
    Definition

    Entidad que registra la ocurrencia del Evento


    Specific instances of data or objects that have been accessed.

    ShortEntidad que registra la ocurrencia del EventoData or objects used
    Comments

    Required unless the values for event identification, agent identification, and audit source identification are sufficient to document the entire auditable event. Because events may have more than one entity, this group can be a repeating set of values.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    The event may have other entities involved.

    Alternate NamesParticipantObject
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    48. AuditEvent.entity.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    50. AuditEvent.entity.what
    Definition

    Recurso o identificación de la entidad que registra la ocurrencia del evento


    Identifies a specific instance of the entity. The reference should be version specific. This is allowed to be a Parameters resource.

    ShortRecurso o identificación de la entidad que registra la ocurrencia del eventoSpecific instance of resource
    Comments

    Use .what.display when all you have is a string (e.g. ParticipantObjectName).

    Control0..1
    TypeReference(Resource)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be foundhere

    0. AuditEvent
    2. AuditEvent.category
    Definition

    Tipo de evento de auditoría.

    ShortTipo de evento de auditoría.
    BindingThe codes SHALL be taken from AuditEventID
    (required to http://hl7.org/fhir/ValueSet/audit-event-type)

    Eventos de auditoría descritos en FHIR para DICOM

    Must Supporttrue
    4. AuditEvent.code
    Definition

    Subtipo de evento de auditoría.

    ShortSubtipo de evento de auditoría.
    BindingThe codes SHALL be taken from AuditEventSubType
    (required to http://hl7.org/fhir/ValueSet/audit-event-sub-type)

    Subtipos de eventos de auditoría descritos en FHIR para DICOM

    Must Supporttrue
    6. AuditEvent.action
    Definition

    Código de la acción

    ShortCreate| Read/View/Print | Update | Delete | Execute
    BindingThe codes SHALL be taken from AuditEventAction
    (required to http://hl7.org/fhir/ValueSet/audit-event-action)

    Códigos fijos extraídos de un set de DICOM por FHIR

    Must Supporttrue
    8. AuditEvent.occurred[x]
    Definition

    Fecha y hora del evento de auditoría.

    ShortFecha y hora del evento de auditoría.
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Must Supporttrue
    10. AuditEvent.recorded
    Definition

    Momento cuando el evento fue almacenado

    ShortMomento cuando el evento fue almacenado
    Must Supporttrue
    12. AuditEvent.outcome
    ShortResultado de la operación
    Must Supporttrue
    14. AuditEvent.outcome.code
    BindingThe codes SHALL be taken from AuditEventOutcome
    (required to http://hl7.org/fhir/ValueSet/audit-event-outcome)

    Códigos extraídos de DICOM

    16. AuditEvent.agent
    Definition

    Debe indicar quien solicitó del recurso

    ShortQuienes actuaron en el evento
    Must Supporttrue
    18. AuditEvent.agent.who
    Definition

    Referencia al recurso o Identificación de quien realizó la acción

    ShortQuien realizó la acción
    TypeReference(Rol de Profesional de la Salud, Profesional de Salud, Organizaciones, Paciente)
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    20. AuditEvent.agent.requestor
    Definition

    Indicador de si Who es quien solicitó la acción

    ShortIndicador de si Who es quien solicitó la acción
    22. AuditEvent.agent.network[x]
    Definition

    Ubicación de red lógica para la actividad de la aplicación, si la actividad tiene una ubicación de red.

    ShortUbicación de la Red de la Aplicación
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Must Supporttrue
    SlicingThis element introduces a set of slices on AuditEvent.agent.network[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ $this
    • 24. AuditEvent.agent.network[x]:networkReference
      Slice NamenetworkReference
      ShortUbicación de la Red de la Aplicación como Reference
      Control0..1
      TypeReference(Endpoint)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Must Supporttrue
      26. AuditEvent.agent.network[x]:networkString
      Slice NamenetworkString
      ShortUbicación de la Red de la Aplicación como String
      Control0..1
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      28. AuditEvent.agent.network[x]:networkUri
      Slice NamenetworkUri
      ShortUbicación de la Red de la Aplicación como URI
      Control0..1
      Typeuri
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      30. AuditEvent.source
      Definition

      Sitio en donde se reporta el evento

      ShortQuien reporta el evento
      Must Supporttrue
      32. AuditEvent.source.observer
      Definition

      Identificación del Observador donde se reportó el evento

      ShortEntidad que reporta el evento
      TypeReference(Rol de Profesional de la Salud, Profesional de Salud, Organizaciones, Paciente)
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      34. AuditEvent.entity
      Definition

      Entidad que registra la ocurrencia del Evento

      ShortEntidad que registra la ocurrencia del Evento
      Must Supporttrue
      36. AuditEvent.entity.what
      Definition

      Recurso o identificación de la entidad que registra la ocurrencia del evento

      ShortRecurso o identificación de la entidad que registra la ocurrencia del evento
      Must Supporttrue

      Guidance on how to interpret the contents of this table can be foundhere

      0. AuditEvent
      Definition

      A record of an event relevant for purposes such as operations, privacy, security, maintenance, and performance analysis.

      ShortRecord of an event
      Comments

      Based on IHE-ATNA.

      Control0..*
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. AuditEvent.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

      Control0..1
      Typeid
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      4. AuditEvent.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. AuditEvent.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. AuditEvent.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHALL be taken from AllLanguages
      (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

      IETF language tag for a human language

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. AuditEvent.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      This element is affected by the following invariants: dom-6
      TypeNarrative
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. AuditEvent.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

      Control0..*
      This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
      TypeResource
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. AuditEvent.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. AuditEvent.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Must Supportfalse
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. AuditEvent.category
      Definition

      Tipo de evento de auditoría.

      ShortTipo de evento de auditoría.
      Control0..*
      BindingThe codes SHALL be taken from AuditEventID
      (required to http://hl7.org/fhir/ValueSet/audit-event-type)

      Eventos de auditoría descritos en FHIR para DICOM

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Codes that classify the general type of event that happened.

      Alternate Namestype
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. AuditEvent.code
      Definition

      Subtipo de evento de auditoría.

      ShortSubtipo de evento de auditoría.
      Control1..1
      BindingThe codes SHALL be taken from AuditEventSubType
      (required to http://hl7.org/fhir/ValueSet/audit-event-sub-type)

      Subtipos de eventos de auditoría descritos en FHIR para DICOM

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      This field enables queries of messages by implementation-defined event categories.

      Alternate Namessubtype
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. AuditEvent.action
      Definition

      Código de la acción

      ShortCreate| Read/View/Print | Update | Delete | Execute
      Control0..1
      BindingThe codes SHALL be taken from AuditEventAction
      (required to http://hl7.org/fhir/ValueSet/audit-event-action)

      Códigos fijos extraídos de un set de DICOM por FHIR

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      This broadly indicates what kind of action was done on the AuditEvent.entity by the AuditEvent.agent.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. AuditEvent.severity
      Definition

      Indicates and enables segmentation of various severity including debugging from critical.

      Shortemergency | alert | critical | error | warning | notice | informational | debug
      Comments

      ATNA will map this to the SYSLOG PRI element.

      Control0..1
      BindingThe codes SHALL be taken from AuditEventSeverity
      (required to http://hl7.org/fhir/ValueSet/audit-event-severity|5.0.0)

      This is in the SysLog header, PRI. http://tools.ietf.org/html/rfc5424#appendix-A.3

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. AuditEvent.occurred[x]
      Definition

      Fecha y hora del evento de auditoría.

      ShortFecha y hora del evento de auditoría.
      Comments

      The time or period can be a little arbitrary; where possible, the time should correspond to human assessment of the activity time.

      Control0..1
      TypeChoice of: Period, dateTime
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. AuditEvent.recorded
      Definition

      Momento cuando el evento fue almacenado

      ShortMomento cuando el evento fue almacenado
      Comments

      In a distributed system, some sort of common time base (e.g. an NTP [RFC1305] server) is a good implementation tactic.

      Control1..1
      Typeinstant
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      This ties an event to a specific date and time. Security audits typically require a consistent time base (e.g. UTC), to eliminate time-zone issues arising from geographical distribution.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. AuditEvent.outcome
      Definition

      Indicates whether the event succeeded or failed. A free text descripiton can be given in outcome.text.

      ShortResultado de la operación
      Comments

      In some cases a "success" may be partial, for example, an incomplete or interrupted transfer of a radiological study. For the purpose of establishing accountability, these distinctions are not relevant.

      Control0..1
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      when a code is given there must be one code from the given codeSystem, and may be other equivilant codes from other codeSystems (for example http response codes such as 2xx, 4xx, or 5xx).

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. AuditEvent.outcome.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      This element is affected by the following invariants: ele-1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      34. AuditEvent.outcome.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      36. AuditEvent.outcome.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      38. AuditEvent.outcome.code
      Definition

      Indicates whether the event succeeded or failed.

      ShortWhether the event succeeded or failed
      Comments

      In some cases a "success" may be partial, for example, an incomplete or interrupted transfer of a radiological study. For the purpose of establishing accountability, these distinctions are not relevant.

      Control1..1
      BindingThe codes SHALL be taken from AuditEventOutcome
      (required to http://hl7.org/fhir/ValueSet/audit-event-outcome)

      Códigos extraídos de DICOM

      TypeCoding
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Requirements

      when a code is given there must be one code from the given codeSystem.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      40. AuditEvent.outcome.detail
      Definition

      Additional details about the error. This may be a text description of the error or a system code that identifies the error.

      ShortAdditional outcome detail
      Comments

      A human readable description of the error issue SHOULD be placed in details.text.

      Control0..*
      BindingFor example codes, see AuditEventOutcomeDetail
      (example to http://hl7.org/fhir/ValueSet/audit-event-outcome-detail|5.0.0)

      A code that provides details as the exact issue.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      42. AuditEvent.authorization
      Definition

      The authorization (e.g., PurposeOfUse) that was used during the event being recorded.

      ShortAuthorization related to the event
      Comments

      Use AuditEvent.agent.authorization when you know that it is specific to the agent, otherwise use AuditEvent.authorization. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

      Control0..*
      BindingFor example codes, see PurposeOfUse
      (example to http://terminology.hl7.org/ValueSet/v3-PurposeOfUse)

      The authorized purposeOfUse for the activity.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Requirements

      Record of any relevant security context, not restricted to purposeOfUse valueSet. May include security compartments, refrain, obligation, or other security tags.

      Alternate NamesPurposeOfEvent
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      44. AuditEvent.basedOn
      Definition

      Allows tracing of authorizatino for the events and tracking whether proposals/recommendations were acted upon.

      ShortWorkflow authorization within which this event occurred
      Control0..*
      TypeReference(CarePlan, DeviceRequest, ImmunizationRecommendation, MedicationRequest, NutritionOrder, ServiceRequest, Task)
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      46. AuditEvent.patient
      Definition

      The patient element is available to enable deterministic tracking of activities that involve the patient as the subject of the data used in an activity.

      ShortThe patient is the subject of the data used/created/updated/deleted during the activity
      Control0..1
      TypeReference(Patient)
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Requirements

      When the .patient is populated it shall be accurate to the subject of the used data. The .patient shall not be populated when the used data used/created/updated/deleted (.entity) by the activity does not involve a subject. Note that when the patient is an agent, they will be recorded as an agent. When the Patient resource is Created, Updated, or Deleted it will be recorded as an entity.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      48. AuditEvent.encounter
      Definition

      This will typically be the encounter the event occurred, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission lab tests).

      ShortEncounter within which this event occurred or which the event is tightly associated
      Control0..1
      TypeReference(Encounter)
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      50. AuditEvent.agent
      Definition

      Debe indicar quien solicitó del recurso

      ShortQuienes actuaron en el evento
      Comments

      Several agents may be associated (i.e. have some responsibility for an activity) with an event or activity.

      For example, an activity may be initiated by one user for other users or involve more than one user. However, only one user may be the initiator/requestor for the activity.

      When a network are used in an event being recorded, there should be distinct agent elements for the known actors using the network. The agent with a network detail would be the responsible agent for use of that network.

      Control1..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      An agent can be a person, an organization, software, device, or other actors that may be ascribed responsibility.

      Alternate NamesActiveParticipant
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      52. AuditEvent.agent.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      This element is affected by the following invariants: ele-1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      54. AuditEvent.agent.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      56. AuditEvent.agent.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      58. AuditEvent.agent.type
      Definition

      The Functional Role of the user when performing the event.

      ShortHow agent participated
      Comments

      For example: assembler, author, prescriber, signer, investigator, etc.

      Control0..1
      BindingThe codes SHOULD be taken from ParticipationRoleType
      (preferred to http://hl7.org/fhir/ValueSet/participation-role-type|5.0.0)

      The Participation type of the agent to the event.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Requirements

      Functional roles reflect functional aspects of relationships between entities. Functional roles are bound to the realization/performance of acts, where actions might be concatenated to an activity or even to a process. This element will hold the functional role that the agent played in the activity that is the focus of this Provenance. Where an agent played multiple functional roles, they will be listed as multiple .agent elements representing each functional participation. See ISO 21298:2018 - Health Informatics - Functional and structural roles, and ISO 22600-2:2014 - Health Informatics - Privilege Management and Access Control - Part 2: formal models.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      60. AuditEvent.agent.role
      Definition

      The structural roles of the agent indicating the agent's competency. The security role enabling the agent with respect to the activity.

      ShortAgent role in the event
      Comments

      For example: Chief-of-Radiology, Nurse, Physician, Medical-Student, etc.

      Control0..*
      BindingFor example codes, see SecurityRoleType
      (example to http://hl7.org/fhir/ValueSet/security-role-type|5.0.0)

      What security role enabled the agent to participate in the event.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Requirements

      Structural roles reflect the structural aspects of relationships between entities. Structural roles describe prerequisites, feasibilities, or competences for acts. Functional roles reflect functional aspects of relationships between entities. Functional roles are bound to the realization/performance of acts, where actions might be concatenated to an activity or even to a process. See ISO 21298:2018 - Health Informatics - Functional and structural roles, and ISO 22600-2:2014 - Health Informatics - Privilege Management and Access Control - Part 2: formal models..

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      62. AuditEvent.agent.who
      Definition

      Referencia al recurso o Identificación de quien realizó la acción

      ShortQuien realizó la acción
      Comments

      Where a User ID is available it will go into who.identifier. Where a name of the user (human readable) it will go into who.display.

      Control1..1
      TypeReference(Rol de Profesional de la Salud, Profesional de Salud, Organizaciones, Paciente)
      Is Modifierfalse
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summarytrue
      Requirements

      This field ties an audit event to a specific resource or identifier.

      Alternate NamesuserId
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      64. AuditEvent.agent.requestor
      Definition

      Indicador de si Who es quien solicitó la acción

      ShortIndicador de si Who es quien solicitó la acción
      Comments

      There can only be one initiator. If the initiator is not clear, then do not choose any one agent as the initiator.

      Control0..1
      Typeboolean
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Requirements

      This value is used to distinguish between requestor-users and recipient-users. For example, one person may initiate a report-output to be sent to another user.

      Meaning if Missingfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      66. AuditEvent.agent.location
      Definition

      Where the agent location is known, the agent location when the event occurred.

      ShortThe agent location when the event occurred
      Control0..1
      TypeReference(Location)
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      68. AuditEvent.agent.policy
      Definition

      Where the policy(ies) are known that authorized the agent participation in the event. Typically, a single activity may have multiple applicable policies, such as patient consent, guarantor funding, etc. The policy would also indicate the security token used.

      ShortPolicy that authorized the agent participation in the event
      Comments

      For example: Where an OAuth token authorizes, the unique identifier from the OAuth token is placed into the policy element Where a policy engine (e.g. XACML) holds policy logic, the unique policy identifier is placed into the policy element.

      Control0..*
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summaryfalse
      Requirements

      This value is used retrospectively to determine the authorization policies.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      70. AuditEvent.agent.network[x]
      Definition

      Ubicación de red lógica para la actividad de la aplicación, si la actividad tiene una ubicación de red.

      ShortUbicación de la Red de la Aplicación
      Comments

      When remote network endpoint is known, another agent representing the remote agent would indicate the remote network endpoint used. Convention is to indicate data flowing from Source to Destination. The convention for Search, given data flows both ways (query parameters vs results), is to have the Source as the initiator of the Search Transaction, and the Destination the responder to the Search transaction.

      Control0..1
      TypeChoice of: Reference(Endpoint), uri, string
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summaryfalse
      Requirements

      When a network protocol is used the endpoint is associated with the agent most directly using the endpoint. This is usually the software agent that has implemented the application level protocol. Preference is to define network in terms of a Reference(Endpoint), or URI; use string only when address or hostname is all that is known. When encoding using string it is best to encode using the formal canonical host name, but if you can't, then you can encode numeric in Literal address form using square brackets '[]' as a v4 string (in dotted notation), or v6 string (in colon notation).

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on AuditEvent.agent.network[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
      • type @ $this
      • 72. AuditEvent.agent.network[x]:networkReference
        Slice NamenetworkReference
        Definition

        When the event utilizes a network there should be an agent describing the local system, and an agent describing remote system, with the network interface details.

        ShortUbicación de la Red de la Aplicación como Reference
        Comments

        When remote network endpoint is known, another agent representing the remote agent would indicate the remote network endpoint used. Convention is to indicate data flowing from Source to Destination. The convention for Search, given data flows both ways (query parameters vs results), is to have the Source as the initiator of the Search Transaction, and the Destination the responder to the Search transaction.

        Control0..1
        TypeReference(Endpoint)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        When a network protocol is used the endpoint is associated with the agent most directly using the endpoint. This is usually the software agent that has implemented the application level protocol. Preference is to define network in terms of a Reference(Endpoint), or URI; use string only when address or hostname is all that is known. When encoding using string it is best to encode using the formal canonical host name, but if you can't, then you can encode numeric in Literal address form using square brackets '[]' as a v4 string (in dotted notation), or v6 string (in colon notation).

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        74. AuditEvent.agent.network[x]:networkString
        Slice NamenetworkString
        Definition

        When the event utilizes a network there should be an agent describing the local system, and an agent describing remote system, with the network interface details.

        ShortUbicación de la Red de la Aplicación como String
        Comments

        When remote network endpoint is known, another agent representing the remote agent would indicate the remote network endpoint used. Convention is to indicate data flowing from Source to Destination. The convention for Search, given data flows both ways (query parameters vs results), is to have the Source as the initiator of the Search Transaction, and the Destination the responder to the Search transaction.

        Control0..1
        Typestring
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summaryfalse
        Requirements

        When a network protocol is used the endpoint is associated with the agent most directly using the endpoint. This is usually the software agent that has implemented the application level protocol. Preference is to define network in terms of a Reference(Endpoint), or URI; use string only when address or hostname is all that is known. When encoding using string it is best to encode using the formal canonical host name, but if you can't, then you can encode numeric in Literal address form using square brackets '[]' as a v4 string (in dotted notation), or v6 string (in colon notation).

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        76. AuditEvent.agent.network[x]:networkUri
        Slice NamenetworkUri
        Definition

        When the event utilizes a network there should be an agent describing the local system, and an agent describing remote system, with the network interface details.

        ShortUbicación de la Red de la Aplicación como URI
        Comments

        When remote network endpoint is known, another agent representing the remote agent would indicate the remote network endpoint used. Convention is to indicate data flowing from Source to Destination. The convention for Search, given data flows both ways (query parameters vs results), is to have the Source as the initiator of the Search Transaction, and the Destination the responder to the Search transaction.

        Control0..1
        Typeuri
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summaryfalse
        Requirements

        When a network protocol is used the endpoint is associated with the agent most directly using the endpoint. This is usually the software agent that has implemented the application level protocol. Preference is to define network in terms of a Reference(Endpoint), or URI; use string only when address or hostname is all that is known. When encoding using string it is best to encode using the formal canonical host name, but if you can't, then you can encode numeric in Literal address form using square brackets '[]' as a v4 string (in dotted notation), or v6 string (in colon notation).

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        78. AuditEvent.agent.authorization
        Definition

        The authorization (e.g., PurposeOfUse) that was used during the event being recorded.

        ShortAllowable authorization for this agent
        Comments

        Use AuditEvent.agent.authorization when you know that is specific to the agent, otherwise use AuditEvent.authorization. For example, during a machine-to-machine transfer it might not be obvious to the audit system who caused the event, but it does know why.

        Control0..*
        BindingFor example codes, see PurposeOfUse
        (example to http://terminology.hl7.org/ValueSet/v3-PurposeOfUse)

        The reason the activity took place.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        Record of any relevant security context, not restricted to purposeOfUse valueSet. May include security compartments, refrain, obligation, or other security tags.

        Alternate NamesPurposeOfUse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        80. AuditEvent.source
        Definition

        Sitio en donde se reporta el evento

        ShortQuien reporta el evento
        Comments

        Events are reported by the actor that detected them. This may be one of the participating actors, but may also be different. The actor may be a human such as a medical-records clerk disclosing data manually, that clerk would be the source for the record of disclosure.

        Control1..1
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        The event is reported by one source.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        82. AuditEvent.source.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        This element is affected by the following invariants: ele-1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        84. AuditEvent.source.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        86. AuditEvent.source.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        88. AuditEvent.source.site
        Definition

        Logical source location within the healthcare enterprise network. For example, a hospital or other provider location within a multi-entity provider group.

        ShortLogical source location within the enterprise
        Control0..1
        TypeReference(Location)
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        This value differentiates among the sites in a multi-site enterprise health information system.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        90. AuditEvent.source.observer
        Definition

        Identificación del Observador donde se reportó el evento

        ShortEntidad que reporta el evento
        Control1..1
        TypeReference(Rol de Profesional de la Salud, Profesional de Salud, Organizaciones, Paciente)
        Is Modifierfalse
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Requirements

        This field ties the event to a specific source system. It may be used to group events for analysis according to where the event was detected.

        Alternate NamesSourceId
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        92. AuditEvent.source.type
        Definition

        Code specifying the type of source where event originated.

        ShortThe type of source where event originated
        Control0..*
        BindingThe codes SHOULD be taken from AuditEventSourceType
        (preferred to http://hl7.org/fhir/ValueSet/security-source-type|5.0.0)

        Code specifying the type of system that detected and recorded the event. Use of these codes is not required but is encouraged to maintain translation with DICOM AuditMessage schema.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        This field indicates which type of source is identified by the Audit Source ID. It is an optional value that may be used to group events for analysis according to the type of source where the event occurred.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        94. AuditEvent.entity
        Definition

        Entidad que registra la ocurrencia del Evento

        ShortEntidad que registra la ocurrencia del Evento
        Comments

        Required unless the values for event identification, agent identification, and audit source identification are sufficient to document the entire auditable event. Because events may have more than one entity, this group can be a repeating set of values.

        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        The event may have other entities involved.

        Alternate NamesParticipantObject
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        96. AuditEvent.entity.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        This element is affected by the following invariants: ele-1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        98. AuditEvent.entity.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        100. AuditEvent.entity.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        102. AuditEvent.entity.what
        Definition

        Recurso o identificación de la entidad que registra la ocurrencia del evento

        ShortRecurso o identificación de la entidad que registra la ocurrencia del evento
        Comments

        Use .what.display when all you have is a string (e.g. ParticipantObjectName).

        Control0..1
        TypeReference(Resource)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        104. AuditEvent.entity.role
        Definition

        Code representing the role the entity played in the event being audited.

        ShortWhat role the entity played
        Control0..1
        BindingFor example codes, see AuditEventEntityRole
        (example to http://hl7.org/fhir/ValueSet/object-role|5.0.0)

        DICOM Audit Event Entity Role

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        For some detailed audit analysis it may be necessary to indicate a more granular type of entity, based on the application role it serves.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        106. AuditEvent.entity.securityLabel
        Definition

        Security labels for the identified entity.

        ShortSecurity labels on the entity
        Comments

        Copied from entity meta security tags.

        Control0..*
        BindingFor example codes, see SecurityLabelExamples
        (example to http://hl7.org/fhir/ValueSet/security-label-examples|5.0.0)

        Example Security Labels from the Healthcare Privacy and Security Classification System.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        This field identifies the security labels for a specific instance of an object, such as a patient, to detect/track privacy and security issues.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        108. AuditEvent.entity.query
        Definition

        The query parameters for a query-type entities.

        ShortQuery parameters
        Comments

        The meaning and secondary-encoding of the content of base64 encoded blob is specific to the AuditEvent.type, AuditEvent.subtype, and AuditEvent.entity.role. The base64 is a general-use and safe container for event specific data blobs regardless of the encoding used by the transaction being recorded. An AuditEvent consuming application must understand the event it is consuming and the formats used by the event. For example, if auditing an Oracle network database access, the Oracle formats must be understood as they will be simply encoded in the base64binary blob.

        The DICOM AuditMessage schema does not support both .name and .query being populated.

        Control0..1
        Typebase64Binary
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summarytrue
        Requirements

        For query events, it may be necessary to capture the actual query input to the query process in order to identify the specific event. Because of differences among query implementations and data encoding for them, this is a base 64 encoded data blob. It may be subsequently decoded or interpreted by downstream audit analysis processing.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        110. AuditEvent.entity.detail
        Definition

        Tagged value pairs for conveying additional information about the entity.

        ShortAdditional Information about the entity
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        Implementation-defined data about specific details of the object accessed or used.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        112. AuditEvent.entity.detail.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        This element is affected by the following invariants: ele-1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        114. AuditEvent.entity.detail.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        116. AuditEvent.entity.detail.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        118. AuditEvent.entity.detail.type
        Definition

        The type of extra detail provided in the value.

        ShortName of the property
        Control1..1
        BindingFor example codes, see AuditEventID
        (example to http://hl7.org/fhir/ValueSet/audit-event-type|5.0.0)

        Additional detail about an entity used in an event.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        120. AuditEvent.entity.detail.value[x]
        Definition

        The value of the extra detail.

        ShortProperty value
        Control1..1
        TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, time, dateTime, Period, base64Binary
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Requirements

        Should not duplicate the entity value unless absolutely necessary.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        122. AuditEvent.entity.agent
        Definition

        The entity is attributed to an agent to express the agent's responsibility for that entity in the activity. This is most used to indicate when persistence media (the entity) are used by an agent. For example when importing data from a device, the device would be described in an entity, and the user importing data from that media would be indicated as the entity.agent.

        ShortEntity is attributed to this agent
        Comments

        A usecase where one AuditEvent.entity.agent is used where the Entity that was used in the creation/updating of a target resource, is not in the context of the same custodianship as the target resource, and thus the meaning of AuditEvent.entity.agent is to say that the entity referenced is managed elsewhere and that this Agent provided access to it. This would be similar to where the Entity being referenced is managed outside FHIR, such as through HL7 V2, v3, or XDS. This might be where the Entity being referenced is managed in another FHIR resource server. Thus it explains the provenance of that Entity's use in the context of this AuditEvent activity.

        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/AuditEvent#AuditEvent.agent
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))