Guías de Implementación HL7 FHIR: CR Core
0.1.1-draft - ci-build
Guías de Implementación HL7 FHIR: CR Core
0.1.1-draft - ci-build
Guías de Implementación HL7 FHIR: CR Core, published by Ministerio de Salud de Costa Rica. This guide is not an authorized publication; it is the continuous build for version 0.1.1-draft built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HIE-cr/core-ig/ and changes regularly. See the Directory of published versions
| Page standards status: Draft | Maturity Level: 0 |
Definitions for the address-base-cr-core data type profile.
Guidance on how to interpret the contents of this table can be foundhere
| 0. Address | |
| Definition | An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world. The ISO21090-codedString may be used to provide a coded representation of the contents of strings in an Address. |
| Short | An address expressed using postal conventions (as opposed to GPS or other location definition formats) |
| Comments | Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). |
| Control | 0..* |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 2. Address.use | |
| Definition | Tipo de dirección. The purpose of this address. |
| Short | Tipo de dirección.home | work | temp | old | billing - purpose of this address |
| Comments | Applications can assume that an address is current unless it explicitly says that it is temporary or old. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from AddressUsehttp://hl7.org/fhir/ValueSet/address-use|5.0.0 (required to http://hl7.org/fhir/ValueSet/address-use|5.0.0)The use of an address (home / work / etc.). |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Allows an appropriate address to be chosen from a list of many. |
| Example | General: home |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 4. Address.type | |
| Definition | Tipo de dirección. Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both. |
| Short | Tipo de dirección.postal | physical | both |
| Comments | The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource). The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource). |
| Control | 0..1 |
| Binding | The codes SHALL be taken from AddressTypehttp://hl7.org/fhir/ValueSet/address-type|5.0.0 (required to http://hl7.org/fhir/ValueSet/address-type|5.0.0)The type of an address (physical / postal). |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Example | General: both |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 6. Address.line | |
| Definition | La dirección completa, incluyendo la calle, el número de la casa o apartamento, la ciudad, el estado, el código postal, etc., si es relevante. This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information. |
| Short | La dirección completa, incluyendo la calle, el número de la casa o apartamento, la ciudad, el estado, el código postal, etc., si es relevante.Street name, number, direction & P.O. Box etc. |
| Control | 10..* |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Example | General: 137 Nowhere Street |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 8. Address.city | |
| Definition | Nombre de la ciudad. The name of the city, town, suburb, village or other community or delivery center. |
| Short | Nombre de la ciudad.Name of city, town etc. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Alternate Names | Municpality |
| Example | General: Erewhon |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Address.city.extension | |
| Definition | Código de la ciudad basado en el ZipCode de Costa Rica. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Código de la ciudad basado en el ZipCode de Costa RicaAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Address.city.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Address.city.extension:cityCode | |
| Slice Name | cityCode |
| Definition | Extensión para el código del cantón basado en el ZipCode de Costa Rica |
| Short | ZipCode del cantón |
| Control | 0..1 |
| Type | Extension(ZipCode del cantón) (Extension Type: CodeableConcept) |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 14. Address.district | |
| Definition | Nombre del distrito. The name of the administrative area (county). |
| Short | Nombre del distrito.District name (aka county) |
| Comments | District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Alternate Names | County |
| Example | General: Madison |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Address.district.extension | |
| Definition | Código del distrito basado en el ZipCode de Costa Rica. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Código del distrito basado en el ZipCode de Costa RicaAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Address.district.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 18. Address.district.extension:districtCode | |
| Slice Name | districtCode |
| Definition | Extensión para el código del distrito basado en el ZipCode de Costa Rica |
| Short | ZipCode del distrito |
| Control | 0..1 |
| Type | Extension(ZipCode del distrito) (Extension Type: CodeableConcept) |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 20. Address.state | |
| Definition | Nombre del estado o provincia. Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes). |
| Short | Nombre del estado o provincia.Sub-unit of country (abbreviations ok) |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Alternate Names | Province, Territory |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 22. Address.state.extension | |
| Definition | Código de la provincia basado en el ZipCode de Costa Rica. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Código de la provincia basado en el ZipCode de Costa RicaAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Address.state.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 24. Address.state.extension:stateCode | |
| Slice Name | stateCode |
| Definition | Extensión para el código de la provincia basado en el ZipCode de Costa Rica |
| Short | ZipCode de la provincia |
| Control | 0..1 |
| Type | Extension(ZipCode de la provincia) (Extension Type: CodeableConcept) |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 26. Address.postalCode | |
| Definition | Código postal. A postal code designating a region defined by the postal service. |
| Short | Código postal.Postal code for area |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Alternate Names | Zip |
| Example | General: 9132 |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Address.country | |
| Definition | Nombre del país. Country - a nation as commonly understood or generally accepted. |
| Short | Nombre del país.Country (e.g. may be ISO 3166 2 or 3 letter code) |
| Comments | ISO 3166 2- or 3- letter codes MAY be used in place of a human readable country name. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 30. Address.country.extension | |
| Definition | Código de país en formato ISO 3166-1 alpha-3 May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Código de país en formato ISO 3166-1 alpha-3Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Address.country.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Address.country.extension:countryCode | |
| Slice Name | countryCode |
| Definition | Extensión para el código de país en formato ISO 3166-1 alpha-3 |
| Short | Código ISO del país |
| Control | 0..1 |
| Type | Extension(Código ISO del país) (Extension Type: CodeableConcept) |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Address | |
| 2. Address.use | |
| Definition | Tipo de dirección. |
| Short | Tipo de dirección. |
| 4. Address.type | |
| Definition | Tipo de dirección. |
| Short | Tipo de dirección. |
| 6. Address.line | |
| Definition | La dirección completa, incluyendo la calle, el número de la casa o apartamento, la ciudad, el estado, el código postal, etc., si es relevante. |
| Short | La dirección completa, incluyendo la calle, el número de la casa o apartamento, la ciudad, el estado, el código postal, etc., si es relevante. |
| Control | 1..? |
| Must Support | true |
| 8. Address.city | |
| Definition | Nombre de la ciudad. |
| Short | Nombre de la ciudad. |
| 10. Address.city.extension | |
| Definition | Código de la ciudad basado en el ZipCode de Costa Rica. |
| Short | Código de la ciudad basado en el ZipCode de Costa Rica |
| Slicing | This element introduces a set of slices on Address.city.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Address.city.extension:cityCode | |
| Slice Name | cityCode |
| Control | 0..1 |
| Type | Extension(ZipCode del cantón) (Extension Type: CodeableConcept) |
| 14. Address.district | |
| Definition | Nombre del distrito. |
| Short | Nombre del distrito. |
| 16. Address.district.extension | |
| Definition | Código del distrito basado en el ZipCode de Costa Rica. |
| Short | Código del distrito basado en el ZipCode de Costa Rica |
| Slicing | This element introduces a set of slices on Address.district.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 18. Address.district.extension:districtCode | |
| Slice Name | districtCode |
| Control | 0..1 |
| Type | Extension(ZipCode del distrito) (Extension Type: CodeableConcept) |
| 20. Address.state | |
| Definition | Nombre del estado o provincia. |
| Short | Nombre del estado o provincia. |
| 22. Address.state.extension | |
| Definition | Código de la provincia basado en el ZipCode de Costa Rica. |
| Short | Código de la provincia basado en el ZipCode de Costa Rica |
| Slicing | This element introduces a set of slices on Address.state.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 24. Address.state.extension:stateCode | |
| Slice Name | stateCode |
| Control | 0..1 |
| Type | Extension(ZipCode de la provincia) (Extension Type: CodeableConcept) |
| 26. Address.postalCode | |
| Definition | Código postal. |
| Short | Código postal. |
| 28. Address.country | |
| Definition | Nombre del país. |
| Short | Nombre del país. |
| Must Support | true |
| 30. Address.country.extension | |
| Definition | Código de país en formato ISO 3166-1 alpha-3 |
| Short | Código de país en formato ISO 3166-1 alpha-3 |
| Slicing | This element introduces a set of slices on Address.country.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Address.country.extension:countryCode | |
| Slice Name | countryCode |
| Control | 0..1 |
| Type | Extension(Código ISO del país) (Extension Type: CodeableConcept) |
| Must Support | true |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Address | |
| Definition | An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world. The ISO21090-codedString may be used to provide a coded representation of the contents of strings in an Address. |
| Short | An address expressed using postal conventions (as opposed to GPS or other location definition formats) |
| Comments | Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). |
| Control | 0..* |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 2. Address.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Address.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Address.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Address.use | |
| Definition | Tipo de dirección. |
| Short | Tipo de dirección. |
| Comments | Applications can assume that an address is current unless it explicitly says that it is temporary or old. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from AddressUse (required to http://hl7.org/fhir/ValueSet/address-use|5.0.0)The use of an address (home / work / etc.). |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Allows an appropriate address to be chosen from a list of many. |
| Example | General: home |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 8. Address.type | |
| Definition | Tipo de dirección. |
| Short | Tipo de dirección. |
| Comments | The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource). |
| Control | 0..1 |
| Binding | The codes SHALL be taken from AddressType (required to http://hl7.org/fhir/ValueSet/address-type|5.0.0)The type of an address (physical / postal). |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Example | General: both |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Address.text | |
| Definition | Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts. |
| Short | Text representation of the address |
| Comments | Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | A renderable, unencoded form. |
| Example | General: 137 Nowhere Street, Erewhon 9132 |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 12. Address.line | |
| Definition | La dirección completa, incluyendo la calle, el número de la casa o apartamento, la ciudad, el estado, el código postal, etc., si es relevante. |
| Short | La dirección completa, incluyendo la calle, el número de la casa o apartamento, la ciudad, el estado, el código postal, etc., si es relevante. |
| Control | 1..* |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Example | General: 137 Nowhere Street |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 14. Address.city | |
| Definition | Nombre de la ciudad. |
| Short | Nombre de la ciudad. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Alternate Names | Municpality |
| Example | General: Erewhon |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Address.city.id | |
| Definition | unique id for the element within a resource (for internal references) |
| Short | xml:id (or equivalent in JSON) |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 18. Address.city.extension | |
| Definition | Código de la ciudad basado en el ZipCode de Costa Rica. |
| Short | Código de la ciudad basado en el ZipCode de Costa Rica |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Address.city.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 20. Address.city.extension:cityCode | |
| Slice Name | cityCode |
| Definition | Extensión para el código del cantón basado en el ZipCode de Costa Rica |
| Short | ZipCode del cantón |
| Control | 0..1 |
| Type | Extension(ZipCode del cantón) (Extension Type: CodeableConcept) |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 22. Address.city.value | |
| Definition | The actual value |
| Short | Primitive value for string |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Max Length: | 1048576 |
| 24. Address.district | |
| Definition | Nombre del distrito. |
| Short | Nombre del distrito. |
| Comments | District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Alternate Names | County |
| Example | General: Madison |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Address.district.id | |
| Definition | unique id for the element within a resource (for internal references) |
| Short | xml:id (or equivalent in JSON) |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 28. Address.district.extension | |
| Definition | Código del distrito basado en el ZipCode de Costa Rica. |
| Short | Código del distrito basado en el ZipCode de Costa Rica |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Address.district.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 30. Address.district.extension:districtCode | |
| Slice Name | districtCode |
| Definition | Extensión para el código del distrito basado en el ZipCode de Costa Rica |
| Short | ZipCode del distrito |
| Control | 0..1 |
| Type | Extension(ZipCode del distrito) (Extension Type: CodeableConcept) |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 32. Address.district.value | |
| Definition | The actual value |
| Short | Primitive value for string |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Max Length: | 1048576 |
| 34. Address.state | |
| Definition | Nombre del estado o provincia. |
| Short | Nombre del estado o provincia. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Alternate Names | Province, Territory |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Address.state.id | |
| Definition | unique id for the element within a resource (for internal references) |
| Short | xml:id (or equivalent in JSON) |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 38. Address.state.extension | |
| Definition | Código de la provincia basado en el ZipCode de Costa Rica. |
| Short | Código de la provincia basado en el ZipCode de Costa Rica |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Address.state.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 40. Address.state.extension:stateCode | |
| Slice Name | stateCode |
| Definition | Extensión para el código de la provincia basado en el ZipCode de Costa Rica |
| Short | ZipCode de la provincia |
| Control | 0..1 |
| Type | Extension(ZipCode de la provincia) (Extension Type: CodeableConcept) |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 42. Address.state.value | |
| Definition | The actual value |
| Short | Primitive value for string |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Max Length: | 1048576 |
| 44. Address.postalCode | |
| Definition | Código postal. |
| Short | Código postal. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Alternate Names | Zip |
| Example | General: 9132 |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Address.country | |
| Definition | Nombre del país. |
| Short | Nombre del país. |
| Comments | ISO 3166 2- or 3- letter codes MAY be used in place of a human readable country name. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 48. Address.country.id | |
| Definition | unique id for the element within a resource (for internal references) |
| Short | xml:id (or equivalent in JSON) |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 50. Address.country.extension | |
| Definition | Código de país en formato ISO 3166-1 alpha-3 |
| Short | Código de país en formato ISO 3166-1 alpha-3 |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Address.country.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 52. Address.country.extension:countryCode | |
| Slice Name | countryCode |
| Definition | Extensión para el código de país en formato ISO 3166-1 alpha-3 |
| Short | Código ISO del país |
| Control | 0..1 |
| Type | Extension(Código ISO del país) (Extension Type: CodeableConcept) |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 54. Address.country.value | |
| Definition | The actual value |
| Short | Primitive value for string |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Max Length: | 1048576 |
| 56. Address.period | |
| Definition | Time period when address was/is in use. |
| Short | Time period when address was/is in use |
| Control | 0..1 |
| Type | Period |
| Is Modifier | false |
| Summary | true |
| Requirements | Allows addresses to be placed in historical context. |
| Example | General: { "start" : "2010-03-23", "end" : "2010-07-01" } |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2025+ Ministerio de Salud de Costa Rica. Package hl7.fhir.cr.core#0.1.1-draft based on FHIR 5.0.0. Generated 2025-09-16
Links: Table of Contents |
QA Report |
New Issue | Issues |
|