MII IG Kerndatensatz-Modul Molekulares Tumorboard
2026.0.0 - release Unknown region code '276'

MII IG Kerndatensatz-Modul Molekulares Tumorboard, published by Medizininformatik-Initiative. This guide is not an authorized publication; it is the continuous build for version 2026.0.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/medizininformatik-initiative/kerndatensatzmodul-molekulares-tumorboard/ and changes regularly. See the Directory of published versions

Resource Profile: MII PR MTB Therapieempfehlung Systemische Therapie

Official URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-pr-mtb-therapieempfehlung Version: 2026.0.0
Active as of 2026-02-09 Computable Name: MII_PR_MTB_Therapieempfehlung

Therapieempfehlung für eine medikamentöse Systemische Therapie

Usages:

You can also check for usages in the FHIR IG Statistics

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. MedicationRequest 0..* MII_PR_Onko_Therapieempfehlung_Medikation Ordering of medication for patient or group
... id SΣ 0..1 id Logical id of this artifact
... meta SΣ 0..1 Meta Metadata about the resource
.... source SΣ 0..1 uri Identifies where the resource comes from
.... profile SΣ 0..* canonical(StructureDefinition) Profiles this resource claims to conform to
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
.... extension:Prioritaet S 0..1 decimal MII EX MTB Empfehlung Priorität
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-prioritaet
.... extension:Evidenzgraduierung S 0..1 CodeableConcept MII EX MTB Empfehlung Evidenzgraduierung
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-evidenzgraduierung
.... extension:Publikation S 0..* Identifier MII EX MTB Empfehlung Publikation
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-publikation
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
Slice: Unordered, Open by value:url
... identifier S 0..* Identifier Identifikator
... status ?!SΣ 1..1 code active | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown
Binding: medicationrequest Status (required): A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription.
... intent ?!SΣ 1..1 code proposal | option
Binding: medicationRequest Intent (required): The kind of medication order.
... Slices for medication[x] SΣ 1..1 Medikation
Slice: Unordered, Open by type:$this
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.
.... medicationCodeableConcept CodeableConcept
.... medicationReference Reference(Medication)
.... medication[x]:medicationReference SΣ 0..1 Reference(MII PR Medikation Medication) Medication to be taken
.... medication[x]:medicationCodeableConcept SΣ 1..1 CodeableConcept Medication to be taken
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.
..... Slices for coding SΣ 1..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:Pharmazentralnummer SΣ 0..* Coding PZN Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fhir.de/CodeSystem/ifa/pzn
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
...... coding:atcClassDe SΣ 0..* Coding ATC Code
Binding: MII VS Medikation ATC (required)

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fhir.de/CodeSystem/bfarm/atc
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
...... coding:atcClassEn SΣ 0..* Coding ATC WHO Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://www.whocc.no/atc
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
...... coding:UNII SΣ 0..* Coding Unique Ingredient Identifier

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fdasis.nlm.nih.gov
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
..... text SΣ 0..1 string Plain text representation of the concept
... subject SΣC 1..1 Reference(Patient) Who or group medication request is for
Constraints: ref-1
... encounter SC 0..1 Reference(Encounter) Fall / Kontakt
Constraints: ref-1
... supportingInformation SC 0..* Reference(Resource) Information to support ordering of the medication
Constraints: ref-1
... authoredOn SΣ 1..1 dateTime Datum der Verordnung
... requester SΣC 0..1 Reference(Practitioner | PractitionerRole | Organization | Patient | RelatedPerson | Device) Anforderer
Constraints: ref-1
... reasonCode S 0..* CodeableConcept Grund Code
Binding: Condition/Problem/DiagnosisCodes (example): A coded concept indicating why the medication was ordered.
... Slices for reasonReference SC 1..* Reference(MII PR Onkologie Diagnose Primärtumor | Condition | Observation) Grund Referenz
Slice: Unordered, Open by profile:$this.resolve()
Constraints: ref-1
.... reasonReference:Primaertumor SC 1..1 Reference(MII PR Onkologie Diagnose Primärtumor) Grund Referenz
Constraints: ref-1
.... reasonReference:StuetzendeMolekulareAlteration SC 0..* Reference(MII PR Patho Finding | MII PR MolGen Variante | MII PR Onkologie Genetische Variante | Observation) Stützende molekulare Alterationen
Constraints: ref-1
... basedOn SΣC 0..* Reference(CarePlan | MedicationRequest | ServiceRequest | ImmunizationRecommendation) Basiert auf
Constraints: ref-1
... note S 0..* Annotation Hinweis
... dosageInstruction SC 0..* DosageDE(1.0.3) Dosierungsanweisung
Constraints: DosageStructuredOrFreeTextWarning, DosageStructuredRequiresBoth, DosageDoseUnitSameCode, DosageWarnungViererschemaInText, FreeTextSingleDosageOnlyWarning, dsg-1
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... sequence SΣ 0..1 integer The order of the dosage instructions
.... text SΣ 0..1 string Freitext-Dosierungsanweisungen, z. B. 'Maximal 3x täglich 1 Stück bei Bedarf'
.... timing SΣ 0..1 TimingDE(1.0.3) Wann das Medikament verabreicht werden soll
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... event SΣ 0..* dateTime When the event occurs
..... repeat SΣC 0..1 Element Wann das Ereignis stattfinden soll
Constraints: tim-9, tim-5, tim-6, tim-7, tim-8, tim-1, tim-10, tim-2, tim-4, TimingSingleDosageForTimeOfDay, TimingSingleDosageForWhen, TimingBoundsUnitMatchesCode
...... Slices for bounds[x] SΣ 0..1 Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
Slice: Unordered, Open by type:$this
....... boundsDuration Duration
....... boundsRange Range
....... boundsPeriod Period
....... bounds[x]:boundsDuration SΣ 0..1 Duration Dauer der Dosieranweisung ausgedrückt in UCUM-Einheiten
Required Pattern: At least the following
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
........ value 0..1 decimal Numerical value (with implicit precision)
........ comparator 0..1 code < | <= | >= | > - how to understand the value
........ unit 0..1 string Unit representation
........ system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
........ code 0..1 code Coded form of the unit
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri UCUM-Einheit für die Dauer
Fixed Value: http://unitsofmeasure.org
........ code SΣ 1..1 code Coded form of the unit
....... bounds[x]:boundsRange SΣ 0..1 Range Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
........ low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
Required Pattern: At least the following
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
......... value 0..1 decimal Numerical value (with implicit precision)
......... comparator 0..1 code < | <= | >= | > - how to understand the value
......... unit 0..1 string Unit representation
......... system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
......... code 0..1 code Coded form of the unit
......... value SΣ 1..1 decimal Numerical value (with implicit precision)
......... unit SΣ 0..1 string Unit representation
......... system SΣC 1..1 uri System that defines coded unit form
......... code SΣ 1..1 code Coded form of the unit
........ high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
Required Pattern: At least the following
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
......... value 0..1 decimal Numerical value (with implicit precision)
......... comparator 0..1 code < | <= | >= | > - how to understand the value
......... unit 0..1 string Unit representation
......... system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
......... code 0..1 code Coded form of the unit
......... value SΣ 1..1 decimal Numerical value (with implicit precision)
......... unit SΣ 0..1 string Unit representation
......... system SΣC 1..1 uri System that defines coded unit form
......... code SΣ 1..1 code Coded form of the unit
....... bounds[x]:boundsPeriod SΣ 0..1 Period Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
........ start SΣC 0..1 dateTime Starting time with inclusive boundary
........ end SΣC 0..1 dateTime End time with inclusive boundary, if not ongoing
...... count SΣ 0..1 positiveInt Number of times to repeat
...... countMax SΣ 0..1 positiveInt Maximum number of times to repeat
...... duration SΣ 0..1 decimal How long when it happens
...... durationMax SΣ 0..1 decimal How long when it happens (Max)
...... durationUnit SΣ 0..1 code s | min | h | d | wk | mo | a - unit of time (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).
...... frequency SΣ 0..1 positiveInt Ereignis tritt frequency-mal pro Zeitraum auf
...... frequencyMax SΣ 0..1 positiveInt Event occurs up to frequencyMax times per period
...... period SΣ 0..1 decimal Ereignis tritt frequency-mal pro Zeitraum auf
...... periodMax SΣ 0..1 decimal Upper limit of period (3-4 hours)
...... periodUnit SΣ 0..1 code s | min | h | d | wk | mo | a - Zeiteinheit (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).
...... dayOfWeek SΣ 0..* code mon | tue | wed | thu | fri | sat | sun
Binding: DaysOfWeek (required)
...... timeOfDay SΣ 0..* time Tageszeit für die Aktion
...... when SΣ 0..* code Code für den Zeitraum des Auftretens
Binding: EventTiming (required): Real world event relating to the schedule.
...... offset SΣ 0..1 unsignedInt Minutes from event (before or after)
.... Slices for asNeeded[x] SΣ 0..1 Take "as needed" (for x)
Slice: Unordered, Open by type:$this
Binding: SNOMEDCTMedicationAsNeededReasonCodes (example): A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.
..... asNeededBoolean boolean
..... asNeededCodeableConcept CodeableConcept
..... asNeeded[x]:asNeededBoolean SΣ 0..1 boolean Take "as needed" (for x)
..... asNeeded[x]:asNeededCodeableConcept SΣ 0..1 CodeableConcept Take "as needed" (for x)
Binding: SNOMEDCTMedicationAsNeededReasonCodes (example): A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.
.... site SΣ 0..1 CodeableConcept Verabreichungsort
Binding: SNOMEDCTAnatomicalStructureForAdministrationSiteCodes (example): A coded concept describing the site location the medicine enters into or onto the body.
..... Slices for coding SΣ 0..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:SNOMED SΣ 0..* Coding SNOMED CT Code
Binding: Target Site - IPS . (example): target site IPS

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://snomed.info/sct
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
.... route SΣ 0..1 CodeableConcept Verabreichungsweg
Binding: SNOMEDCTRouteCodes (example): A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject.
..... Slices for coding SΣ 0..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:EDQM SΣ 0..1 Coding EDQM Code
Binding: Medicine EDQM Route of Administration - IPS (preferred): EDQM Standard Terms

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://standardterms.edqm.eu
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
...... coding:SNOMED SΣ 0..1 Coding SNOMED CT Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://snomed.info/sct
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
.... doseAndRate SΣ 0..* Element Menge des verabreichten Medikaments
..... Slices for dose[x] SΣ 0..1 Amount of medication per dose
Slice: Unordered, Open by type:$this
...... doseRange Range
...... doseQuantity Quantity(SimpleQuantity)
...... dose[x]:doseQuantity SΣC 0..1 SimpleQuantity Menge des Medikaments pro Dosis
Binding: Dosage DoseQuantity ValueSet (required)
Constraints: qty-3, sqty-1
...... dose[x]:doseRange SΣ 0..1 Range Amount of medication per dose
....... low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
..... Slices for rate[x] SΣ 0..1 Amount of medication per unit of time
Slice: Unordered, Open by type:$this
...... rateRatio Ratio
...... rateRange Range
...... rateQuantity Quantity(SimpleQuantity)
...... rate[x]:rateRatio SΣ 0..1 Ratio Amount of medication per unit of time
....... numerator SΣC 0..1 Quantity Numerator value
Constraints: qty-3
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... denominator SΣC 0..1 Quantity Denominator value
Constraints: qty-3
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
...... rate[x]:rateRange SΣ 0..1 Range Amount of medication per unit of time
....... low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
...... rate[x]:rateQuantity SΣC 0..1 SimpleQuantity A fixed quantity (no comparator)
Constraints: qty-3, sqty-1
....... value SΣ 1..1 decimal Numerical value (with implicit precision)
....... unit SΣ 0..1 string Unit representation
....... system SΣC 1..1 uri System that defines coded unit form
....... code SΣ 1..1 code Coded form of the unit
.... maxDosePerPeriod SΣC 0..1 Ratio Upper limit on medication per unit of time
Constraints: rat-1
..... numerator SΣC 0..1 Quantity Numerator value
Constraints: qty-3
...... value SΣ 1..1 decimal Numerical value (with implicit precision)
...... comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
...... unit SΣ 0..1 string Unit representation
...... system SΣC 1..1 uri System that defines coded unit form
...... code SΣ 1..1 code Coded form of the unit
..... denominator SΣC 0..1 Quantity Denominator value
Constraints: qty-3
...... value SΣ 1..1 decimal Numerical value (with implicit precision)
...... comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
...... unit SΣ 0..1 string Unit representation
...... system SΣC 1..1 uri System that defines coded unit form
...... code SΣ 1..1 code Coded form of the unit
.... maxDosePerAdministration SΣC 0..1 SimpleQuantity Upper limit on medication per administration
Constraints: qty-3, sqty-1
..... value SΣ 1..1 decimal Numerical value (with implicit precision)
..... unit SΣ 0..1 string Unit representation
..... system SΣC 1..1 uri System that defines coded unit form
..... code SΣ 1..1 code Coded form of the unit
... substitution S 0..1 BackboneElement Substitution
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... Slices for allowed[x] S 1..1 Whether substitution is allowed or not
Slice: Unordered, Open by type:$this
Binding: ActSubstanceAdminSubstitutionCode (example): Identifies the type of substitution allowed.
..... allowedBoolean boolean
..... allowedCodeableConcept CodeableConcept
..... allowed[x]:allowedBoolean S 0..1 boolean Whether substitution is allowed or not
..... allowed[x]:allowedCodeableConcept S 0..1 CodeableConcept Whether substitution is allowed or not
Binding: ActSubstanceAdminSubstitutionCode (example): Identifies the type of substitution allowed.
... priorPrescription SC 0..1 Reference(MedicationRequest) Vorherige Verschreibung
Constraints: ref-1

doco Documentation for this format

Terminology Bindings

Path Status Usage ValueSet Version Source
MedicationRequest.status Base required Medicationrequest status 📍4.0.1 FHIR Std.
MedicationRequest.intent Base required Medication request intent 📍4.0.1 FHIR Std.
MedicationRequest.medication[x] Base example SNOMED CT Medication Codes 📦4.0.1 FHIR Std.
MedicationRequest.medication[x]:medicationCodeableConcept Base example SNOMED CT Medication Codes 📦4.0.1 FHIR Std.
MedicationRequest.medication[x]:medicationCodeableConcept.​coding:atcClassDe Base required MII VS Medikation ATC 📦2026.0.0 MII IG Medikation v2026.0
MedicationRequest.reasonCode Base example Condition/Problem/Diagnosis Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.bounds[x]:boundsDuration.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.durationUnit Base required UnitsOfTime 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.periodUnit Base required UnitsOfTime 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.dayOfWeek Base required DaysOfWeek 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.when Base required EventTiming 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​asNeeded[x] Base example SNOMED CT Medication As Needed Reason Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​asNeeded[x]:asNeededCodeableConcept Base example SNOMED CT Medication As Needed Reason Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​site Base example SNOMED CT Anatomical Structure for Administration Site Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​site.coding:SNOMED Base example Target Site - IPS . ⏿1.1.0 tx.hl7europe.eu
MedicationRequest.dosageInstruction.​route Base example SNOMED CT Route Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​route.coding:EDQM Base preferred Medicine EDQM Route of Administration - IPS 📦2.0.0 International Patient Summary Implementation Guide v2.0
MedicationRequest.dosageInstruction.​doseAndRate.dose[x]:doseQuantity Base required Dosage DoseQuantity ValueSet 📦1.0.3 Medication IG DE v1.0
MedicationRequest.dosageInstruction.​doseAndRate.rate[x]:rateRatio.​numerator.comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​doseAndRate.rate[x]:rateRatio.​denominator.comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​maxDosePerPeriod.numerator.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​maxDosePerPeriod.denominator.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.substitution.​allowed[x] Base example ActSubstanceAdminSubstitutionCode 📦3.0.0 THO v7.0
MedicationRequest.substitution.​allowed[x]:allowedCodeableConcept Base example ActSubstanceAdminSubstitutionCode 📦3.0.0 THO v7.0

Constraints

Id Grade Path(s) Description Expression
DosageDoseUnitSameCode error MedicationRequest.dosageInstruction Die Dosiereinheit muss über alle Dosierungen gleich sein. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( doseAndRate.exists() implies ( %resource.dosageInstruction.doseAndRate.dose.ofType(Quantity).code | %resource.dosageInstruction.doseAndRate.dose.ofType(Range).low.code | %resource.dosageInstruction.doseAndRate.dose.ofType(Range).high.code ).distinct().count() = 1 )
DosageStructuredOrFreeTextWarning warning MedicationRequest.dosageInstruction Die Dosierungsangabe darf entweder nur als Freitext oder nur als vollständige strukturierte Information erfolgen — eine Mischung ist nicht erlaubt. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( (text.exists() and timing.empty() and doseAndRate.empty()) or (text.empty() and (timing.exists() or doseAndRate.exists())) )
DosageStructuredRequiresBoth error MedicationRequest.dosageInstruction Wenn eine strukturierte Dosierungsangabe erfolgt, müssen sowohl timing als auch doseAndRate angegeben werden. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( (timing.exists() implies doseAndRate.exists()) and (doseAndRate.exists() implies timing.exists()) )
DosageWarnungViererschemaInText warning MedicationRequest.dosageInstruction Hinweis: In Dosage.text wurde ein Viererschema (z. B. 1-1-1-1) erkannt. Bitte prüfen, ob dies strukturiert abgebildet werden kann. text.exists() implies text.matches('.*\\d+\\s*[-–]\\s*\\d+\\s*[-–]\\s*\\d+\\s*[-–]\\d+.*').not()
FreeTextSingleDosageOnlyWarning warning MedicationRequest.dosageInstruction Wenn eine Dosierung als reiner Freitext angegeben ist, soll nur genau ein Dosage-Element existieren. ( (%resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).exists(text.exists() and timing.empty() and doseAndRate.empty()) ) implies ( (%resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).count() = 1 )
TimingBoundsUnitMatchesCode error MedicationRequest.dosageInstruction.timing.repeat boundsDuration.unit muss zur UCUM boundsDuration.code passen (z. B. 'Woche(n)' nur mit code='wk'). bounds.ofType(Duration).exists().not() or ( ( bounds.ofType(Duration).code = 'd' implies ( bounds.ofType(Duration).unit = 'Tag(e)' or bounds.ofType(Duration).unit = 'Tag' or bounds.ofType(Duration).unit = 'Tage' ) ) and ( bounds.ofType(Duration).code = 'wk' implies ( bounds.ofType(Duration).unit = 'Woche(n)' or bounds.ofType(Duration).unit = 'Woche' or bounds.ofType(Duration).unit = 'Wochen' ) ) and ( bounds.ofType(Duration).code = 'mo' implies ( bounds.ofType(Duration).unit = 'Monat(e)' or bounds.ofType(Duration).unit = 'Monat' or bounds.ofType(Duration).unit = 'Monate' ) ) and ( bounds.ofType(Duration).code = 'a' implies ( bounds.ofType(Duration).unit = 'Jahr(e)' or bounds.ofType(Duration).unit = 'Jahr' or bounds.ofType(Duration).unit = 'Jahre' ) ) )
TimingSingleDosageForTimeOfDay error MedicationRequest.dosageInstruction.timing.repeat Wenn nur timeOfDay verwendet wird und täglich dosiert wird, ist die Angabe in einem einzigen Dosage-Element zu modellieren. Mehrere Dosage-Elemente sind nur zulässig, wenn sich die Dosis (Wert) unterscheidet. ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).all( ( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ) implies ( ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).count() = 1 ) or ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).doseAndRate.dose.ofType(Quantity).value.distinct().count() > 1 ) ) )
TimingSingleDosageForWhen error MedicationRequest.dosageInstruction.timing.repeat Wenn nur when verwendet wird und täglich dosiert wird, ist die Angabe in einem einzigen Dosage-Element zu modellieren. Mehrere Dosage-Elemente sind nur zulässig, wenn sich die Dosis (Wert) unterscheidet. ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).all( ( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ) implies ( ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).count() = 1 ) or ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).doseAndRate.dose.ofType(Quantity).value.distinct().count() > 1 ) ) )
dom-2 error MedicationRequest If the resource is contained in another resource, it SHALL NOT contain nested Resources contained.contained.empty()
dom-3 error MedicationRequest If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4 error MedicationRequest If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5 error MedicationRequest If a resource is contained in another resource, it SHALL NOT have a security label contained.meta.security.empty()
dom-6 best practice MedicationRequest A resource should have narrative for robust management text.`div`.exists()
dsg-1 error MedicationRequest.dosageInstruction If present, dosage must include free text or structured data text.exists() or doseAndRate.exists()
ele-1 error **ALL** elements All FHIR elements must have a @value or children hasValue() or (children().count() > id.count())
ext-1 error **ALL** extensions Must have either extensions or value[x], not both extension.exists() != value.exists()
qty-3 error MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.low, MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.high, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.low, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRatio.numerator, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRatio.denominator, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.low, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateQuantity, MedicationRequest.dosageInstruction.maxDosePerPeriod.numerator, MedicationRequest.dosageInstruction.maxDosePerPeriod.denominator, MedicationRequest.dosageInstruction.maxDosePerAdministration If a code for the unit is present, the system SHALL also be present code.empty() or system.exists()
rat-1 error MedicationRequest.dosageInstruction.maxDosePerPeriod Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present (numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())
ref-1 error MedicationRequest.subject, MedicationRequest.encounter, MedicationRequest.supportingInformation, MedicationRequest.requester, MedicationRequest.reasonReference, MedicationRequest.reasonReference:Primaertumor, MedicationRequest.reasonReference:StuetzendeMolekulareAlteration, MedicationRequest.basedOn, MedicationRequest.priorPrescription SHALL have a contained resource if a local reference is provided reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
sqty-1 error MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.low, MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.high, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.low, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.low, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateQuantity, MedicationRequest.dosageInstruction.maxDosePerAdministration The comparator is not used on a SimpleQuantity comparator.empty()
tim-1 error MedicationRequest.dosageInstruction.timing.repeat if there's a duration, there needs to be duration units duration.empty() or durationUnit.exists()
tim-2 error MedicationRequest.dosageInstruction.timing.repeat if there's a period, there needs to be period units period.empty() or periodUnit.exists()
tim-4 error MedicationRequest.dosageInstruction.timing.repeat duration SHALL be a non-negative value duration.exists() implies duration >= 0
tim-5 error MedicationRequest.dosageInstruction.timing.repeat period SHALL be a non-negative value period.exists() implies period >= 0
tim-6 error MedicationRequest.dosageInstruction.timing.repeat If there's a periodMax, there must be a period periodMax.empty() or period.exists()
tim-7 error MedicationRequest.dosageInstruction.timing.repeat If there's a durationMax, there must be a duration durationMax.empty() or duration.exists()
tim-8 error MedicationRequest.dosageInstruction.timing.repeat If there's a countMax, there must be a count countMax.empty() or count.exists()
tim-9 error MedicationRequest.dosageInstruction.timing.repeat If there's an offset, there must be a when (and not C, CM, CD, CV) offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not()))
tim-10 error MedicationRequest.dosageInstruction.timing.repeat If there's a timeOfDay, there cannot be a when, or vice versa timeOfDay.empty() or when.empty()

This structure is derived from MII_PR_Onko_Therapieempfehlung_Medikation

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. MedicationRequest 0..* MII_PR_Onko_Therapieempfehlung_Medikation Ordering of medication for patient or group
... Slices for extension Content/Rules for all slices
.... extension:Prioritaet S 0..1 decimal MII EX MTB Empfehlung Priorität
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-prioritaet
.... extension:Evidenzgraduierung S 0..1 CodeableConcept MII EX MTB Empfehlung Evidenzgraduierung
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-evidenzgraduierung
.... extension:Publikation S 0..* Identifier MII EX MTB Empfehlung Publikation
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-publikation
... status 1..1 code active | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown
... intent 1..1 code proposal | option
.... reasonReference:StuetzendeMolekulareAlteration S 0..* Reference(MII PR Patho Finding | MII PR MolGen Variante | MII PR Onkologie Genetische Variante | Observation) Stützende molekulare Alterationen

doco Documentation for this format
NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. MedicationRequest 0..* MII_PR_Onko_Therapieempfehlung_Medikation Ordering of medication for patient or group
... id SΣ 0..1 id Logical id of this artifact
... meta SΣ 0..1 Meta Metadata about the resource
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... versionId Σ 0..1 id Version specific identifier
.... lastUpdated Σ 0..1 instant When the resource version last changed
.... source SΣ 0..1 uri Identifies where the resource comes from
.... profile SΣ 0..* canonical(StructureDefinition) Profiles this resource claims to conform to
.... security Σ 0..* Coding Security Labels applied to this resource
Binding: All Security Labels (extensible): Security Labels from the Healthcare Privacy and Security Classification System.
.... tag Σ 0..* Coding Tags applied to this resource
Binding: CommonTags (example): Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... language 0..1 code Language of the resource content
Binding: CommonLanguages (preferred): A human language.
Additional BindingsPurpose
AllLanguages Max Binding
... text 0..1 Narrative Text summary of the resource, for human interpretation
This profile does not constrain the narrative in regard to content, language, or traceability to data elements
... contained 0..* Resource Contained, inline Resources
... Slices for extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... extension:Prioritaet S 0..1 decimal MII EX MTB Empfehlung Priorität
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-prioritaet
.... extension:Evidenzgraduierung S 0..1 CodeableConcept MII EX MTB Empfehlung Evidenzgraduierung
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-evidenzgraduierung
.... extension:Publikation S 0..* Identifier MII EX MTB Empfehlung Publikation
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-publikation
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
Slice: Unordered, Open by value:url
... identifier S 0..* Identifier Identifikator
... status ?!SΣ 1..1 code active | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown
Binding: medicationrequest Status (required): A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription.
... statusReason 0..1 CodeableConcept Reason for current status
Binding: medicationRequest Status Reason Codes (example): Identifies the reasons for a given status.
... intent ?!SΣ 1..1 code proposal | option
Binding: medicationRequest Intent (required): The kind of medication order.
... category 0..* CodeableConcept Type of medication usage
Binding: medicationRequest Category Codes (example): A coded concept identifying the category of medication request. For example, where the medication is to be consumed or administered, or the type of medication treatment.
... priority Σ 0..1 code routine | urgent | asap | stat
Binding: RequestPriority (required): Identifies the level of importance to be assigned to actioning the request.
... reported[x] Σ 0..1 Reported rather than primary record
.... reportedBoolean boolean
.... reportedReference Reference(Patient | Practitioner | PractitionerRole | RelatedPerson | Organization)
... Slices for medication[x] SΣ 1..1 Medikation
Slice: Unordered, Open by type:$this
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.
.... medicationCodeableConcept CodeableConcept
.... medicationReference Reference(Medication)
.... medication[x]:medicationReference SΣ 0..1 Reference(MII PR Medikation Medication) Medication to be taken
.... medication[x]:medicationCodeableConcept SΣ 1..1 CodeableConcept Medication to be taken
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... Slices for coding SΣ 1..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:Pharmazentralnummer SΣ 0..* Coding PZN Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fhir.de/CodeSystem/ifa/pzn
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
...... coding:atcClassDe SΣ 0..* Coding ATC Code
Binding: MII VS Medikation ATC (required)

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fhir.de/CodeSystem/bfarm/atc
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
...... coding:atcClassEn SΣ 0..* Coding ATC WHO Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://www.whocc.no/atc
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
...... coding:UNII SΣ 0..* Coding Unique Ingredient Identifier

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fdasis.nlm.nih.gov
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
..... text SΣ 0..1 string Plain text representation of the concept
... subject SΣC 1..1 Reference(Patient) Who or group medication request is for
Constraints: ref-1
... encounter SC 0..1 Reference(Encounter) Fall / Kontakt
Constraints: ref-1
... supportingInformation SC 0..* Reference(Resource) Information to support ordering of the medication
Constraints: ref-1
... authoredOn SΣ 1..1 dateTime Datum der Verordnung
... requester SΣC 0..1 Reference(Practitioner | PractitionerRole | Organization | Patient | RelatedPerson | Device) Anforderer
Constraints: ref-1
... performer C 0..1 Reference(Practitioner | PractitionerRole | Organization | Patient | Device | RelatedPerson | CareTeam) Intended performer of administration
Constraints: ref-1
... performerType Σ 0..1 CodeableConcept Desired kind of performer of the medication administration
Binding: ProcedurePerformerRoleCodes (example): Identifies the type of individual that is desired to administer the medication.
... recorder C 0..1 Reference(Practitioner | PractitionerRole) Auftragserfasser
Constraints: ref-1
... reasonCode S 0..* CodeableConcept Grund Code
Binding: Condition/Problem/DiagnosisCodes (example): A coded concept indicating why the medication was ordered.
... Slices for reasonReference SC 1..* Reference(MII PR Onkologie Diagnose Primärtumor | Condition | Observation) Grund Referenz
Slice: Unordered, Open by profile:$this.resolve()
Constraints: ref-1
.... reasonReference:Primaertumor SC 1..1 Reference(MII PR Onkologie Diagnose Primärtumor) Grund Referenz
Constraints: ref-1
.... reasonReference:StuetzendeMolekulareAlteration SC 0..* Reference(MII PR Patho Finding | MII PR MolGen Variante | MII PR Onkologie Genetische Variante | Observation) Stützende molekulare Alterationen
Constraints: ref-1
... instantiatesCanonical Σ 0..* canonical() Instantiates FHIR protocol or definition
... instantiatesUri Σ 0..* uri Instantiates external protocol or definition
... basedOn SΣC 0..* Reference(CarePlan | MedicationRequest | ServiceRequest | ImmunizationRecommendation) Basiert auf
Constraints: ref-1
... groupIdentifier Σ 0..1 Identifier Composite request this is part of
... courseOfTherapyType 0..1 CodeableConcept Overall pattern of medication administration
Binding: medicationRequest Course of Therapy Codes (example): Identifies the overall pattern of medication administratio.
... insurance C 0..* Reference(Coverage | ClaimResponse) Associated insurance coverage
Constraints: ref-1
... note S 0..* Annotation Hinweis
... dosageInstruction SC 0..* DosageDE(1.0.3) Dosierungsanweisung
Constraints: DosageStructuredOrFreeTextWarning, DosageStructuredRequiresBoth, DosageDoseUnitSameCode, DosageWarnungViererschemaInText, FreeTextSingleDosageOnlyWarning, dsg-1
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... sequence SΣ 0..1 integer The order of the dosage instructions
.... text SΣ 0..1 string Freitext-Dosierungsanweisungen, z. B. 'Maximal 3x täglich 1 Stück bei Bedarf'
.... additionalInstruction Σ 0..* CodeableConcept Supplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness"
Binding: SNOMEDCTAdditionalDosageInstructions (example): A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery".
.... patientInstruction Σ 0..1 string Patient or consumer oriented instructions
.... timing SΣ 0..1 TimingDE(1.0.3) Wann das Medikament verabreicht werden soll
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... event SΣ 0..* dateTime When the event occurs
..... repeat SΣC 0..1 Element Wann das Ereignis stattfinden soll
Constraints: tim-9, tim-5, tim-6, tim-7, tim-8, tim-1, tim-10, tim-2, tim-4, TimingSingleDosageForTimeOfDay, TimingSingleDosageForWhen, TimingBoundsUnitMatchesCode
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... Slices for bounds[x] SΣ 0..1 Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
Slice: Unordered, Open by type:$this
....... boundsDuration Duration
....... boundsRange Range
....... boundsPeriod Period
....... bounds[x]:boundsDuration SΣ 0..1 Duration Dauer der Dosieranweisung ausgedrückt in UCUM-Einheiten
Required Pattern: At least the following
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
........ value 0..1 decimal Numerical value (with implicit precision)
........ comparator 0..1 code < | <= | >= | > - how to understand the value
........ unit 0..1 string Unit representation
........ system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
........ code 0..1 code Coded form of the unit
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri UCUM-Einheit für die Dauer
Fixed Value: http://unitsofmeasure.org
........ code SΣ 1..1 code Coded form of the unit
....... bounds[x]:boundsRange SΣ 0..1 Range Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
Required Pattern: At least the following
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
......... value 0..1 decimal Numerical value (with implicit precision)
......... comparator 0..1 code < | <= | >= | > - how to understand the value
......... unit 0..1 string Unit representation
......... system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
......... code 0..1 code Coded form of the unit
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
......... value SΣ 1..1 decimal Numerical value (with implicit precision)
......... unit SΣ 0..1 string Unit representation
......... system SΣC 1..1 uri System that defines coded unit form
......... code SΣ 1..1 code Coded form of the unit
........ high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
Required Pattern: At least the following
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
......... value 0..1 decimal Numerical value (with implicit precision)
......... comparator 0..1 code < | <= | >= | > - how to understand the value
......... unit 0..1 string Unit representation
......... system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
......... code 0..1 code Coded form of the unit
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
......... value SΣ 1..1 decimal Numerical value (with implicit precision)
......... unit SΣ 0..1 string Unit representation
......... system SΣC 1..1 uri System that defines coded unit form
......... code SΣ 1..1 code Coded form of the unit
....... bounds[x]:boundsPeriod SΣ 0..1 Period Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ start SΣC 0..1 dateTime Starting time with inclusive boundary
........ end SΣC 0..1 dateTime End time with inclusive boundary, if not ongoing
...... count SΣ 0..1 positiveInt Number of times to repeat
...... countMax SΣ 0..1 positiveInt Maximum number of times to repeat
...... duration SΣ 0..1 decimal How long when it happens
...... durationMax SΣ 0..1 decimal How long when it happens (Max)
...... durationUnit SΣ 0..1 code s | min | h | d | wk | mo | a - unit of time (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).
...... frequency SΣ 0..1 positiveInt Ereignis tritt frequency-mal pro Zeitraum auf
...... frequencyMax SΣ 0..1 positiveInt Event occurs up to frequencyMax times per period
...... period SΣ 0..1 decimal Ereignis tritt frequency-mal pro Zeitraum auf
...... periodMax SΣ 0..1 decimal Upper limit of period (3-4 hours)
...... periodUnit SΣ 0..1 code s | min | h | d | wk | mo | a - Zeiteinheit (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).
...... dayOfWeek SΣ 0..* code mon | tue | wed | thu | fri | sat | sun
Binding: DaysOfWeek (required)
...... timeOfDay SΣ 0..* time Tageszeit für die Aktion
...... when SΣ 0..* code Code für den Zeitraum des Auftretens
Binding: EventTiming (required): Real world event relating to the schedule.
...... offset SΣ 0..1 unsignedInt Minutes from event (before or after)
..... code Σ 0..1 CodeableConcept BID | TID | QID | AM | PM | QD | QOD | +
Binding: TimingAbbreviation (preferred): Code for a known / defined timing pattern.
.... Slices for asNeeded[x] SΣ 0..1 Take "as needed" (for x)
Slice: Unordered, Open by type:$this
Binding: SNOMEDCTMedicationAsNeededReasonCodes (example): A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.
..... asNeededBoolean boolean
..... asNeededCodeableConcept CodeableConcept
..... asNeeded[x]:asNeededBoolean SΣ 0..1 boolean Take "as needed" (for x)
..... asNeeded[x]:asNeededCodeableConcept SΣ 0..1 CodeableConcept Take "as needed" (for x)
Binding: SNOMEDCTMedicationAsNeededReasonCodes (example): A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.
.... site SΣ 0..1 CodeableConcept Verabreichungsort
Binding: SNOMEDCTAnatomicalStructureForAdministrationSiteCodes (example): A coded concept describing the site location the medicine enters into or onto the body.
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... Slices for coding SΣ 0..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:SNOMED SΣ 0..* Coding SNOMED CT Code
Binding: Target Site - IPS . (example): target site IPS

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://snomed.info/sct
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
..... text Σ 0..1 string Plain text representation of the concept
.... route SΣ 0..1 CodeableConcept Verabreichungsweg
Binding: SNOMEDCTRouteCodes (example): A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject.
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... Slices for coding SΣ 0..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:EDQM SΣ 0..1 Coding EDQM Code
Binding: Medicine EDQM Route of Administration - IPS (preferred): EDQM Standard Terms

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://standardterms.edqm.eu
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
...... coding:SNOMED SΣ 0..1 Coding SNOMED CT Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://snomed.info/sct
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
..... text Σ 0..1 string Plain text representation of the concept
.... method Σ 0..1 CodeableConcept Technique for administering medication
Binding: SNOMEDCTAdministrationMethodCodes (example): A coded concept describing the technique by which the medicine is administered.
.... doseAndRate SΣ 0..* Element Menge des verabreichten Medikaments
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... type Σ 0..1 CodeableConcept The kind of dose or rate specified
Binding: DoseAndRateType (example): The kind of dose or rate specified.
..... Slices for dose[x] SΣ 0..1 Amount of medication per dose
Slice: Unordered, Open by type:$this
...... doseRange Range
...... doseQuantity Quantity(SimpleQuantity)
...... dose[x]:doseQuantity SΣC 0..1 SimpleQuantity Menge des Medikaments pro Dosis
Binding: Dosage DoseQuantity ValueSet (required)
Constraints: qty-3, sqty-1
...... dose[x]:doseRange SΣ 0..1 Range Amount of medication per dose
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
..... Slices for rate[x] SΣ 0..1 Amount of medication per unit of time
Slice: Unordered, Open by type:$this
...... rateRatio Ratio
...... rateRange Range
...... rateQuantity Quantity(SimpleQuantity)
...... rate[x]:rateRatio SΣ 0..1 Ratio Amount of medication per unit of time
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... numerator SΣC 0..1 Quantity Numerator value
Constraints: qty-3
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... denominator SΣC 0..1 Quantity Denominator value
Constraints: qty-3
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
...... rate[x]:rateRange SΣ 0..1 Range Amount of medication per unit of time
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
...... rate[x]:rateQuantity SΣC 0..1 SimpleQuantity A fixed quantity (no comparator)
Constraints: qty-3, sqty-1
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... value SΣ 1..1 decimal Numerical value (with implicit precision)
....... unit SΣ 0..1 string Unit representation
....... system SΣC 1..1 uri System that defines coded unit form
....... code SΣ 1..1 code Coded form of the unit
.... maxDosePerPeriod SΣC 0..1 Ratio Upper limit on medication per unit of time
Constraints: rat-1
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... numerator SΣC 0..1 Quantity Numerator value
Constraints: qty-3
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... value SΣ 1..1 decimal Numerical value (with implicit precision)
...... comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
...... unit SΣ 0..1 string Unit representation
...... system SΣC 1..1 uri System that defines coded unit form
...... code SΣ 1..1 code Coded form of the unit
..... denominator SΣC 0..1 Quantity Denominator value
Constraints: qty-3
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... value SΣ 1..1 decimal Numerical value (with implicit precision)
...... comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
...... unit SΣ 0..1 string Unit representation
...... system SΣC 1..1 uri System that defines coded unit form
...... code SΣ 1..1 code Coded form of the unit
.... maxDosePerAdministration SΣC 0..1 SimpleQuantity Upper limit on medication per administration
Constraints: qty-3, sqty-1
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... value SΣ 1..1 decimal Numerical value (with implicit precision)
..... unit SΣ 0..1 string Unit representation
..... system SΣC 1..1 uri System that defines coded unit form
..... code SΣ 1..1 code Coded form of the unit
.... maxDosePerLifetime ΣC 0..1 SimpleQuantity Upper limit on medication per lifetime of the patient
Constraints: qty-3, sqty-1
... dispenseRequest 0..1 BackboneElement Medication supply authorization
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... initialFill 0..1 BackboneElement First fill details
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... quantity C 0..1 SimpleQuantity First fill quantity
Constraints: qty-3, sqty-1
..... duration C 0..1 Duration First fill duration
Constraints: qty-3, drt-1
.... dispenseInterval C 0..1 Duration Minimum period of time between dispenses
Constraints: qty-3, drt-1
.... validityPeriod C 0..1 Period Time period supply is authorized for
Constraints: per-1
.... numberOfRepeatsAllowed 0..1 unsignedInt Number of refills authorized
.... quantity C 0..1 SimpleQuantity Amount of medication to supply per dispense
Constraints: qty-3, sqty-1
.... expectedSupplyDuration C 0..1 Duration Number of days supply per dispense
Constraints: qty-3, drt-1
.... performer C 0..1 Reference(Organization) Intended dispenser
Constraints: ref-1
... substitution S 0..1 BackboneElement Substitution
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... Slices for allowed[x] S 1..1 Whether substitution is allowed or not
Slice: Unordered, Open by type:$this
Binding: ActSubstanceAdminSubstitutionCode (example): Identifies the type of substitution allowed.
..... allowedBoolean boolean
..... allowedCodeableConcept CodeableConcept
..... allowed[x]:allowedBoolean S 0..1 boolean Whether substitution is allowed or not
..... allowed[x]:allowedCodeableConcept S 0..1 CodeableConcept Whether substitution is allowed or not
Binding: ActSubstanceAdminSubstitutionCode (example): Identifies the type of substitution allowed.
.... reason 0..1 CodeableConcept Why should (not) substitution be made
Binding: SubstanceAdminSubstitutionReason (example): A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed.
... priorPrescription SC 0..1 Reference(MedicationRequest) Vorherige Verschreibung
Constraints: ref-1
... detectedIssue C 0..* Reference(DetectedIssue) Erkannte Probleme
Constraints: ref-1
... eventHistory C 0..* Reference(Provenance) A list of events of interest in the lifecycle
Constraints: ref-1

doco Documentation for this format

Terminology Bindings

Path Status Usage ValueSet Version Source
MedicationRequest.meta.​security Base extensible SecurityLabels 📦4.0.1 FHIR Std.
MedicationRequest.meta.​tag Base example Common Tags 📦4.0.1 FHIR Std.
MedicationRequest.language Base preferred Common Languages 📦4.0.1 FHIR Std.
MedicationRequest.status Base required Medicationrequest status 📍4.0.1 FHIR Std.
MedicationRequest.statusReason Base example Medication request status reason codes 📦4.0.1 FHIR Std.
MedicationRequest.intent Base required Medication request intent 📍4.0.1 FHIR Std.
MedicationRequest.category Base example Medication request category codes 📦4.0.1 FHIR Std.
MedicationRequest.priority Base required Request priority 📍4.0.1 FHIR Std.
MedicationRequest.medication[x] Base example SNOMED CT Medication Codes 📦4.0.1 FHIR Std.
MedicationRequest.medication[x]:medicationCodeableConcept Base example SNOMED CT Medication Codes 📦4.0.1 FHIR Std.
MedicationRequest.medication[x]:medicationCodeableConcept.​coding:atcClassDe Base required MII VS Medikation ATC 📦2026.0.0 MII IG Medikation v2026.0
MedicationRequest.performerType Base example Procedure Performer Role Codes 📦4.0.1 FHIR Std.
MedicationRequest.reasonCode Base example Condition/Problem/Diagnosis Codes 📦4.0.1 FHIR Std.
MedicationRequest.courseOfTherapyType Base example Medication request course of therapy codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​additionalInstruction Base example SNOMED CT Additional Dosage Instructions 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.bounds[x]:boundsDuration.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.durationUnit Base required UnitsOfTime 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.periodUnit Base required UnitsOfTime 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.dayOfWeek Base required DaysOfWeek 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.when Base required EventTiming 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.code Base preferred TimingAbbreviation 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​asNeeded[x] Base example SNOMED CT Medication As Needed Reason Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​asNeeded[x]:asNeededCodeableConcept Base example SNOMED CT Medication As Needed Reason Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​site Base example SNOMED CT Anatomical Structure for Administration Site Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​site.coding:SNOMED Base example Target Site - IPS . ⏿1.1.0 tx.hl7europe.eu
MedicationRequest.dosageInstruction.​route Base example SNOMED CT Route Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​route.coding:EDQM Base preferred Medicine EDQM Route of Administration - IPS 📦2.0.0 International Patient Summary Implementation Guide v2.0
MedicationRequest.dosageInstruction.​method Base example SNOMED CT Administration Method Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​doseAndRate.type Base example DoseAndRateType 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​doseAndRate.dose[x]:doseQuantity Base required Dosage DoseQuantity ValueSet 📦1.0.3 Medication IG DE v1.0
MedicationRequest.dosageInstruction.​doseAndRate.rate[x]:rateRatio.​numerator.comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​doseAndRate.rate[x]:rateRatio.​denominator.comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​maxDosePerPeriod.numerator.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​maxDosePerPeriod.denominator.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.substitution.​allowed[x] Base example ActSubstanceAdminSubstitutionCode 📦3.0.0 THO v7.0
MedicationRequest.substitution.​allowed[x]:allowedCodeableConcept Base example ActSubstanceAdminSubstitutionCode 📦3.0.0 THO v7.0
MedicationRequest.substitution.​reason Base example SubstanceAdminSubstitutionReason 📦3.0.0 THO v7.0

Constraints

Id Grade Path(s) Description Expression
DosageDoseUnitSameCode error MedicationRequest.dosageInstruction Die Dosiereinheit muss über alle Dosierungen gleich sein. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( doseAndRate.exists() implies ( %resource.dosageInstruction.doseAndRate.dose.ofType(Quantity).code | %resource.dosageInstruction.doseAndRate.dose.ofType(Range).low.code | %resource.dosageInstruction.doseAndRate.dose.ofType(Range).high.code ).distinct().count() = 1 )
DosageStructuredOrFreeTextWarning warning MedicationRequest.dosageInstruction Die Dosierungsangabe darf entweder nur als Freitext oder nur als vollständige strukturierte Information erfolgen — eine Mischung ist nicht erlaubt. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( (text.exists() and timing.empty() and doseAndRate.empty()) or (text.empty() and (timing.exists() or doseAndRate.exists())) )
DosageStructuredRequiresBoth error MedicationRequest.dosageInstruction Wenn eine strukturierte Dosierungsangabe erfolgt, müssen sowohl timing als auch doseAndRate angegeben werden. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( (timing.exists() implies doseAndRate.exists()) and (doseAndRate.exists() implies timing.exists()) )
DosageWarnungViererschemaInText warning MedicationRequest.dosageInstruction Hinweis: In Dosage.text wurde ein Viererschema (z. B. 1-1-1-1) erkannt. Bitte prüfen, ob dies strukturiert abgebildet werden kann. text.exists() implies text.matches('.*\\d+\\s*[-–]\\s*\\d+\\s*[-–]\\s*\\d+\\s*[-–]\\d+.*').not()
FreeTextSingleDosageOnlyWarning warning MedicationRequest.dosageInstruction Wenn eine Dosierung als reiner Freitext angegeben ist, soll nur genau ein Dosage-Element existieren. ( (%resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).exists(text.exists() and timing.empty() and doseAndRate.empty()) ) implies ( (%resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).count() = 1 )
TimingBoundsUnitMatchesCode error MedicationRequest.dosageInstruction.timing.repeat boundsDuration.unit muss zur UCUM boundsDuration.code passen (z. B. 'Woche(n)' nur mit code='wk'). bounds.ofType(Duration).exists().not() or ( ( bounds.ofType(Duration).code = 'd' implies ( bounds.ofType(Duration).unit = 'Tag(e)' or bounds.ofType(Duration).unit = 'Tag' or bounds.ofType(Duration).unit = 'Tage' ) ) and ( bounds.ofType(Duration).code = 'wk' implies ( bounds.ofType(Duration).unit = 'Woche(n)' or bounds.ofType(Duration).unit = 'Woche' or bounds.ofType(Duration).unit = 'Wochen' ) ) and ( bounds.ofType(Duration).code = 'mo' implies ( bounds.ofType(Duration).unit = 'Monat(e)' or bounds.ofType(Duration).unit = 'Monat' or bounds.ofType(Duration).unit = 'Monate' ) ) and ( bounds.ofType(Duration).code = 'a' implies ( bounds.ofType(Duration).unit = 'Jahr(e)' or bounds.ofType(Duration).unit = 'Jahr' or bounds.ofType(Duration).unit = 'Jahre' ) ) )
TimingSingleDosageForTimeOfDay error MedicationRequest.dosageInstruction.timing.repeat Wenn nur timeOfDay verwendet wird und täglich dosiert wird, ist die Angabe in einem einzigen Dosage-Element zu modellieren. Mehrere Dosage-Elemente sind nur zulässig, wenn sich die Dosis (Wert) unterscheidet. ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).all( ( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ) implies ( ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).count() = 1 ) or ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).doseAndRate.dose.ofType(Quantity).value.distinct().count() > 1 ) ) )
TimingSingleDosageForWhen error MedicationRequest.dosageInstruction.timing.repeat Wenn nur when verwendet wird und täglich dosiert wird, ist die Angabe in einem einzigen Dosage-Element zu modellieren. Mehrere Dosage-Elemente sind nur zulässig, wenn sich die Dosis (Wert) unterscheidet. ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).all( ( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ) implies ( ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).count() = 1 ) or ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).doseAndRate.dose.ofType(Quantity).value.distinct().count() > 1 ) ) )
dom-2 error MedicationRequest If the resource is contained in another resource, it SHALL NOT contain nested Resources contained.contained.empty()
dom-3 error MedicationRequest If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4 error MedicationRequest If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5 error MedicationRequest If a resource is contained in another resource, it SHALL NOT have a security label contained.meta.security.empty()
dom-6 best practice MedicationRequest A resource should have narrative for robust management text.`div`.exists()
drt-1 error MedicationRequest.dispenseRequest.initialFill.duration, MedicationRequest.dispenseRequest.dispenseInterval, MedicationRequest.dispenseRequest.expectedSupplyDuration There SHALL be a code if there is a value and it SHALL be an expression of time. If system is present, it SHALL be UCUM. code.exists() implies ((system = %ucum) and value.exists())
dsg-1 error MedicationRequest.dosageInstruction If present, dosage must include free text or structured data text.exists() or doseAndRate.exists()
ele-1 error **ALL** elements All FHIR elements must have a @value or children hasValue() or (children().count() > id.count())
ext-1 error **ALL** extensions Must have either extensions or value[x], not both extension.exists() != value.exists()
per-1 error MedicationRequest.dispenseRequest.validityPeriod If present, start SHALL have a lower value than end start.hasValue().not() or end.hasValue().not() or (start <= end)
qty-3 error MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.low, MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.high, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.low, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRatio.numerator, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRatio.denominator, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.low, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateQuantity, MedicationRequest.dosageInstruction.maxDosePerPeriod.numerator, MedicationRequest.dosageInstruction.maxDosePerPeriod.denominator, MedicationRequest.dosageInstruction.maxDosePerAdministration, MedicationRequest.dosageInstruction.maxDosePerLifetime, MedicationRequest.dispenseRequest.initialFill.quantity, MedicationRequest.dispenseRequest.initialFill.duration, MedicationRequest.dispenseRequest.dispenseInterval, MedicationRequest.dispenseRequest.quantity, MedicationRequest.dispenseRequest.expectedSupplyDuration If a code for the unit is present, the system SHALL also be present code.empty() or system.exists()
rat-1 error MedicationRequest.dosageInstruction.maxDosePerPeriod Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present (numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())
ref-1 error MedicationRequest.subject, MedicationRequest.encounter, MedicationRequest.supportingInformation, MedicationRequest.requester, MedicationRequest.performer, MedicationRequest.recorder, MedicationRequest.reasonReference, MedicationRequest.reasonReference:Primaertumor, MedicationRequest.reasonReference:StuetzendeMolekulareAlteration, MedicationRequest.basedOn, MedicationRequest.insurance, MedicationRequest.dispenseRequest.performer, MedicationRequest.priorPrescription, MedicationRequest.detectedIssue, MedicationRequest.eventHistory SHALL have a contained resource if a local reference is provided reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
sqty-1 error MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.low, MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.high, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.low, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.low, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateQuantity, MedicationRequest.dosageInstruction.maxDosePerAdministration, MedicationRequest.dosageInstruction.maxDosePerLifetime, MedicationRequest.dispenseRequest.initialFill.quantity, MedicationRequest.dispenseRequest.quantity The comparator is not used on a SimpleQuantity comparator.empty()
tim-1 error MedicationRequest.dosageInstruction.timing.repeat if there's a duration, there needs to be duration units duration.empty() or durationUnit.exists()
tim-2 error MedicationRequest.dosageInstruction.timing.repeat if there's a period, there needs to be period units period.empty() or periodUnit.exists()
tim-4 error MedicationRequest.dosageInstruction.timing.repeat duration SHALL be a non-negative value duration.exists() implies duration >= 0
tim-5 error MedicationRequest.dosageInstruction.timing.repeat period SHALL be a non-negative value period.exists() implies period >= 0
tim-6 error MedicationRequest.dosageInstruction.timing.repeat If there's a periodMax, there must be a period periodMax.empty() or period.exists()
tim-7 error MedicationRequest.dosageInstruction.timing.repeat If there's a durationMax, there must be a duration durationMax.empty() or duration.exists()
tim-8 error MedicationRequest.dosageInstruction.timing.repeat If there's a countMax, there must be a count countMax.empty() or count.exists()
tim-9 error MedicationRequest.dosageInstruction.timing.repeat If there's an offset, there must be a when (and not C, CM, CD, CV) offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not()))
tim-10 error MedicationRequest.dosageInstruction.timing.repeat If there's a timeOfDay, there cannot be a when, or vice versa timeOfDay.empty() or when.empty()

Key Elements View

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. MedicationRequest 0..* MII_PR_Onko_Therapieempfehlung_Medikation Ordering of medication for patient or group
... id SΣ 0..1 id Logical id of this artifact
... meta SΣ 0..1 Meta Metadata about the resource
.... source SΣ 0..1 uri Identifies where the resource comes from
.... profile SΣ 0..* canonical(StructureDefinition) Profiles this resource claims to conform to
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
.... extension:Prioritaet S 0..1 decimal MII EX MTB Empfehlung Priorität
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-prioritaet
.... extension:Evidenzgraduierung S 0..1 CodeableConcept MII EX MTB Empfehlung Evidenzgraduierung
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-evidenzgraduierung
.... extension:Publikation S 0..* Identifier MII EX MTB Empfehlung Publikation
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-publikation
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
Slice: Unordered, Open by value:url
... identifier S 0..* Identifier Identifikator
... status ?!SΣ 1..1 code active | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown
Binding: medicationrequest Status (required): A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription.
... intent ?!SΣ 1..1 code proposal | option
Binding: medicationRequest Intent (required): The kind of medication order.
... Slices for medication[x] SΣ 1..1 Medikation
Slice: Unordered, Open by type:$this
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.
.... medicationCodeableConcept CodeableConcept
.... medicationReference Reference(Medication)
.... medication[x]:medicationReference SΣ 0..1 Reference(MII PR Medikation Medication) Medication to be taken
.... medication[x]:medicationCodeableConcept SΣ 1..1 CodeableConcept Medication to be taken
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.
..... Slices for coding SΣ 1..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:Pharmazentralnummer SΣ 0..* Coding PZN Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fhir.de/CodeSystem/ifa/pzn
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
...... coding:atcClassDe SΣ 0..* Coding ATC Code
Binding: MII VS Medikation ATC (required)

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fhir.de/CodeSystem/bfarm/atc
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
...... coding:atcClassEn SΣ 0..* Coding ATC WHO Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://www.whocc.no/atc
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
...... coding:UNII SΣ 0..* Coding Unique Ingredient Identifier

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fdasis.nlm.nih.gov
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
..... text SΣ 0..1 string Plain text representation of the concept
... subject SΣC 1..1 Reference(Patient) Who or group medication request is for
Constraints: ref-1
... encounter SC 0..1 Reference(Encounter) Fall / Kontakt
Constraints: ref-1
... supportingInformation SC 0..* Reference(Resource) Information to support ordering of the medication
Constraints: ref-1
... authoredOn SΣ 1..1 dateTime Datum der Verordnung
... requester SΣC 0..1 Reference(Practitioner | PractitionerRole | Organization | Patient | RelatedPerson | Device) Anforderer
Constraints: ref-1
... reasonCode S 0..* CodeableConcept Grund Code
Binding: Condition/Problem/DiagnosisCodes (example): A coded concept indicating why the medication was ordered.
... Slices for reasonReference SC 1..* Reference(MII PR Onkologie Diagnose Primärtumor | Condition | Observation) Grund Referenz
Slice: Unordered, Open by profile:$this.resolve()
Constraints: ref-1
.... reasonReference:Primaertumor SC 1..1 Reference(MII PR Onkologie Diagnose Primärtumor) Grund Referenz
Constraints: ref-1
.... reasonReference:StuetzendeMolekulareAlteration SC 0..* Reference(MII PR Patho Finding | MII PR MolGen Variante | MII PR Onkologie Genetische Variante | Observation) Stützende molekulare Alterationen
Constraints: ref-1
... basedOn SΣC 0..* Reference(CarePlan | MedicationRequest | ServiceRequest | ImmunizationRecommendation) Basiert auf
Constraints: ref-1
... note S 0..* Annotation Hinweis
... dosageInstruction SC 0..* DosageDE(1.0.3) Dosierungsanweisung
Constraints: DosageStructuredOrFreeTextWarning, DosageStructuredRequiresBoth, DosageDoseUnitSameCode, DosageWarnungViererschemaInText, FreeTextSingleDosageOnlyWarning, dsg-1
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... sequence SΣ 0..1 integer The order of the dosage instructions
.... text SΣ 0..1 string Freitext-Dosierungsanweisungen, z. B. 'Maximal 3x täglich 1 Stück bei Bedarf'
.... timing SΣ 0..1 TimingDE(1.0.3) Wann das Medikament verabreicht werden soll
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... event SΣ 0..* dateTime When the event occurs
..... repeat SΣC 0..1 Element Wann das Ereignis stattfinden soll
Constraints: tim-9, tim-5, tim-6, tim-7, tim-8, tim-1, tim-10, tim-2, tim-4, TimingSingleDosageForTimeOfDay, TimingSingleDosageForWhen, TimingBoundsUnitMatchesCode
...... Slices for bounds[x] SΣ 0..1 Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
Slice: Unordered, Open by type:$this
....... boundsDuration Duration
....... boundsRange Range
....... boundsPeriod Period
....... bounds[x]:boundsDuration SΣ 0..1 Duration Dauer der Dosieranweisung ausgedrückt in UCUM-Einheiten
Required Pattern: At least the following
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
........ value 0..1 decimal Numerical value (with implicit precision)
........ comparator 0..1 code < | <= | >= | > - how to understand the value
........ unit 0..1 string Unit representation
........ system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
........ code 0..1 code Coded form of the unit
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri UCUM-Einheit für die Dauer
Fixed Value: http://unitsofmeasure.org
........ code SΣ 1..1 code Coded form of the unit
....... bounds[x]:boundsRange SΣ 0..1 Range Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
........ low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
Required Pattern: At least the following
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
......... value 0..1 decimal Numerical value (with implicit precision)
......... comparator 0..1 code < | <= | >= | > - how to understand the value
......... unit 0..1 string Unit representation
......... system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
......... code 0..1 code Coded form of the unit
......... value SΣ 1..1 decimal Numerical value (with implicit precision)
......... unit SΣ 0..1 string Unit representation
......... system SΣC 1..1 uri System that defines coded unit form
......... code SΣ 1..1 code Coded form of the unit
........ high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
Required Pattern: At least the following
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
......... value 0..1 decimal Numerical value (with implicit precision)
......... comparator 0..1 code < | <= | >= | > - how to understand the value
......... unit 0..1 string Unit representation
......... system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
......... code 0..1 code Coded form of the unit
......... value SΣ 1..1 decimal Numerical value (with implicit precision)
......... unit SΣ 0..1 string Unit representation
......... system SΣC 1..1 uri System that defines coded unit form
......... code SΣ 1..1 code Coded form of the unit
....... bounds[x]:boundsPeriod SΣ 0..1 Period Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
........ start SΣC 0..1 dateTime Starting time with inclusive boundary
........ end SΣC 0..1 dateTime End time with inclusive boundary, if not ongoing
...... count SΣ 0..1 positiveInt Number of times to repeat
...... countMax SΣ 0..1 positiveInt Maximum number of times to repeat
...... duration SΣ 0..1 decimal How long when it happens
...... durationMax SΣ 0..1 decimal How long when it happens (Max)
...... durationUnit SΣ 0..1 code s | min | h | d | wk | mo | a - unit of time (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).
...... frequency SΣ 0..1 positiveInt Ereignis tritt frequency-mal pro Zeitraum auf
...... frequencyMax SΣ 0..1 positiveInt Event occurs up to frequencyMax times per period
...... period SΣ 0..1 decimal Ereignis tritt frequency-mal pro Zeitraum auf
...... periodMax SΣ 0..1 decimal Upper limit of period (3-4 hours)
...... periodUnit SΣ 0..1 code s | min | h | d | wk | mo | a - Zeiteinheit (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).
...... dayOfWeek SΣ 0..* code mon | tue | wed | thu | fri | sat | sun
Binding: DaysOfWeek (required)
...... timeOfDay SΣ 0..* time Tageszeit für die Aktion
...... when SΣ 0..* code Code für den Zeitraum des Auftretens
Binding: EventTiming (required): Real world event relating to the schedule.
...... offset SΣ 0..1 unsignedInt Minutes from event (before or after)
.... Slices for asNeeded[x] SΣ 0..1 Take "as needed" (for x)
Slice: Unordered, Open by type:$this
Binding: SNOMEDCTMedicationAsNeededReasonCodes (example): A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.
..... asNeededBoolean boolean
..... asNeededCodeableConcept CodeableConcept
..... asNeeded[x]:asNeededBoolean SΣ 0..1 boolean Take "as needed" (for x)
..... asNeeded[x]:asNeededCodeableConcept SΣ 0..1 CodeableConcept Take "as needed" (for x)
Binding: SNOMEDCTMedicationAsNeededReasonCodes (example): A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.
.... site SΣ 0..1 CodeableConcept Verabreichungsort
Binding: SNOMEDCTAnatomicalStructureForAdministrationSiteCodes (example): A coded concept describing the site location the medicine enters into or onto the body.
..... Slices for coding SΣ 0..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:SNOMED SΣ 0..* Coding SNOMED CT Code
Binding: Target Site - IPS . (example): target site IPS

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://snomed.info/sct
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
.... route SΣ 0..1 CodeableConcept Verabreichungsweg
Binding: SNOMEDCTRouteCodes (example): A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject.
..... Slices for coding SΣ 0..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:EDQM SΣ 0..1 Coding EDQM Code
Binding: Medicine EDQM Route of Administration - IPS (preferred): EDQM Standard Terms

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://standardterms.edqm.eu
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
...... coding:SNOMED SΣ 0..1 Coding SNOMED CT Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://snomed.info/sct
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... system SΣ 1..1 uri Identity of the terminology system
....... code SΣ 1..1 code Symbol in syntax defined by the system
.... doseAndRate SΣ 0..* Element Menge des verabreichten Medikaments
..... Slices for dose[x] SΣ 0..1 Amount of medication per dose
Slice: Unordered, Open by type:$this
...... doseRange Range
...... doseQuantity Quantity(SimpleQuantity)
...... dose[x]:doseQuantity SΣC 0..1 SimpleQuantity Menge des Medikaments pro Dosis
Binding: Dosage DoseQuantity ValueSet (required)
Constraints: qty-3, sqty-1
...... dose[x]:doseRange SΣ 0..1 Range Amount of medication per dose
....... low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
..... Slices for rate[x] SΣ 0..1 Amount of medication per unit of time
Slice: Unordered, Open by type:$this
...... rateRatio Ratio
...... rateRange Range
...... rateQuantity Quantity(SimpleQuantity)
...... rate[x]:rateRatio SΣ 0..1 Ratio Amount of medication per unit of time
....... numerator SΣC 0..1 Quantity Numerator value
Constraints: qty-3
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... denominator SΣC 0..1 Quantity Denominator value
Constraints: qty-3
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
...... rate[x]:rateRange SΣ 0..1 Range Amount of medication per unit of time
....... low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
...... rate[x]:rateQuantity SΣC 0..1 SimpleQuantity A fixed quantity (no comparator)
Constraints: qty-3, sqty-1
....... value SΣ 1..1 decimal Numerical value (with implicit precision)
....... unit SΣ 0..1 string Unit representation
....... system SΣC 1..1 uri System that defines coded unit form
....... code SΣ 1..1 code Coded form of the unit
.... maxDosePerPeriod SΣC 0..1 Ratio Upper limit on medication per unit of time
Constraints: rat-1
..... numerator SΣC 0..1 Quantity Numerator value
Constraints: qty-3
...... value SΣ 1..1 decimal Numerical value (with implicit precision)
...... comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
...... unit SΣ 0..1 string Unit representation
...... system SΣC 1..1 uri System that defines coded unit form
...... code SΣ 1..1 code Coded form of the unit
..... denominator SΣC 0..1 Quantity Denominator value
Constraints: qty-3
...... value SΣ 1..1 decimal Numerical value (with implicit precision)
...... comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
...... unit SΣ 0..1 string Unit representation
...... system SΣC 1..1 uri System that defines coded unit form
...... code SΣ 1..1 code Coded form of the unit
.... maxDosePerAdministration SΣC 0..1 SimpleQuantity Upper limit on medication per administration
Constraints: qty-3, sqty-1
..... value SΣ 1..1 decimal Numerical value (with implicit precision)
..... unit SΣ 0..1 string Unit representation
..... system SΣC 1..1 uri System that defines coded unit form
..... code SΣ 1..1 code Coded form of the unit
... substitution S 0..1 BackboneElement Substitution
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... Slices for allowed[x] S 1..1 Whether substitution is allowed or not
Slice: Unordered, Open by type:$this
Binding: ActSubstanceAdminSubstitutionCode (example): Identifies the type of substitution allowed.
..... allowedBoolean boolean
..... allowedCodeableConcept CodeableConcept
..... allowed[x]:allowedBoolean S 0..1 boolean Whether substitution is allowed or not
..... allowed[x]:allowedCodeableConcept S 0..1 CodeableConcept Whether substitution is allowed or not
Binding: ActSubstanceAdminSubstitutionCode (example): Identifies the type of substitution allowed.
... priorPrescription SC 0..1 Reference(MedicationRequest) Vorherige Verschreibung
Constraints: ref-1

doco Documentation for this format

Terminology Bindings

Path Status Usage ValueSet Version Source
MedicationRequest.status Base required Medicationrequest status 📍4.0.1 FHIR Std.
MedicationRequest.intent Base required Medication request intent 📍4.0.1 FHIR Std.
MedicationRequest.medication[x] Base example SNOMED CT Medication Codes 📦4.0.1 FHIR Std.
MedicationRequest.medication[x]:medicationCodeableConcept Base example SNOMED CT Medication Codes 📦4.0.1 FHIR Std.
MedicationRequest.medication[x]:medicationCodeableConcept.​coding:atcClassDe Base required MII VS Medikation ATC 📦2026.0.0 MII IG Medikation v2026.0
MedicationRequest.reasonCode Base example Condition/Problem/Diagnosis Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.bounds[x]:boundsDuration.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.durationUnit Base required UnitsOfTime 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.periodUnit Base required UnitsOfTime 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.dayOfWeek Base required DaysOfWeek 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.when Base required EventTiming 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​asNeeded[x] Base example SNOMED CT Medication As Needed Reason Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​asNeeded[x]:asNeededCodeableConcept Base example SNOMED CT Medication As Needed Reason Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​site Base example SNOMED CT Anatomical Structure for Administration Site Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​site.coding:SNOMED Base example Target Site - IPS . ⏿1.1.0 tx.hl7europe.eu
MedicationRequest.dosageInstruction.​route Base example SNOMED CT Route Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​route.coding:EDQM Base preferred Medicine EDQM Route of Administration - IPS 📦2.0.0 International Patient Summary Implementation Guide v2.0
MedicationRequest.dosageInstruction.​doseAndRate.dose[x]:doseQuantity Base required Dosage DoseQuantity ValueSet 📦1.0.3 Medication IG DE v1.0
MedicationRequest.dosageInstruction.​doseAndRate.rate[x]:rateRatio.​numerator.comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​doseAndRate.rate[x]:rateRatio.​denominator.comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​maxDosePerPeriod.numerator.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​maxDosePerPeriod.denominator.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.substitution.​allowed[x] Base example ActSubstanceAdminSubstitutionCode 📦3.0.0 THO v7.0
MedicationRequest.substitution.​allowed[x]:allowedCodeableConcept Base example ActSubstanceAdminSubstitutionCode 📦3.0.0 THO v7.0

Constraints

Id Grade Path(s) Description Expression
DosageDoseUnitSameCode error MedicationRequest.dosageInstruction Die Dosiereinheit muss über alle Dosierungen gleich sein. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( doseAndRate.exists() implies ( %resource.dosageInstruction.doseAndRate.dose.ofType(Quantity).code | %resource.dosageInstruction.doseAndRate.dose.ofType(Range).low.code | %resource.dosageInstruction.doseAndRate.dose.ofType(Range).high.code ).distinct().count() = 1 )
DosageStructuredOrFreeTextWarning warning MedicationRequest.dosageInstruction Die Dosierungsangabe darf entweder nur als Freitext oder nur als vollständige strukturierte Information erfolgen — eine Mischung ist nicht erlaubt. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( (text.exists() and timing.empty() and doseAndRate.empty()) or (text.empty() and (timing.exists() or doseAndRate.exists())) )
DosageStructuredRequiresBoth error MedicationRequest.dosageInstruction Wenn eine strukturierte Dosierungsangabe erfolgt, müssen sowohl timing als auch doseAndRate angegeben werden. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( (timing.exists() implies doseAndRate.exists()) and (doseAndRate.exists() implies timing.exists()) )
DosageWarnungViererschemaInText warning MedicationRequest.dosageInstruction Hinweis: In Dosage.text wurde ein Viererschema (z. B. 1-1-1-1) erkannt. Bitte prüfen, ob dies strukturiert abgebildet werden kann. text.exists() implies text.matches('.*\\d+\\s*[-–]\\s*\\d+\\s*[-–]\\s*\\d+\\s*[-–]\\d+.*').not()
FreeTextSingleDosageOnlyWarning warning MedicationRequest.dosageInstruction Wenn eine Dosierung als reiner Freitext angegeben ist, soll nur genau ein Dosage-Element existieren. ( (%resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).exists(text.exists() and timing.empty() and doseAndRate.empty()) ) implies ( (%resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).count() = 1 )
TimingBoundsUnitMatchesCode error MedicationRequest.dosageInstruction.timing.repeat boundsDuration.unit muss zur UCUM boundsDuration.code passen (z. B. 'Woche(n)' nur mit code='wk'). bounds.ofType(Duration).exists().not() or ( ( bounds.ofType(Duration).code = 'd' implies ( bounds.ofType(Duration).unit = 'Tag(e)' or bounds.ofType(Duration).unit = 'Tag' or bounds.ofType(Duration).unit = 'Tage' ) ) and ( bounds.ofType(Duration).code = 'wk' implies ( bounds.ofType(Duration).unit = 'Woche(n)' or bounds.ofType(Duration).unit = 'Woche' or bounds.ofType(Duration).unit = 'Wochen' ) ) and ( bounds.ofType(Duration).code = 'mo' implies ( bounds.ofType(Duration).unit = 'Monat(e)' or bounds.ofType(Duration).unit = 'Monat' or bounds.ofType(Duration).unit = 'Monate' ) ) and ( bounds.ofType(Duration).code = 'a' implies ( bounds.ofType(Duration).unit = 'Jahr(e)' or bounds.ofType(Duration).unit = 'Jahr' or bounds.ofType(Duration).unit = 'Jahre' ) ) )
TimingSingleDosageForTimeOfDay error MedicationRequest.dosageInstruction.timing.repeat Wenn nur timeOfDay verwendet wird und täglich dosiert wird, ist die Angabe in einem einzigen Dosage-Element zu modellieren. Mehrere Dosage-Elemente sind nur zulässig, wenn sich die Dosis (Wert) unterscheidet. ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).all( ( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ) implies ( ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).count() = 1 ) or ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).doseAndRate.dose.ofType(Quantity).value.distinct().count() > 1 ) ) )
TimingSingleDosageForWhen error MedicationRequest.dosageInstruction.timing.repeat Wenn nur when verwendet wird und täglich dosiert wird, ist die Angabe in einem einzigen Dosage-Element zu modellieren. Mehrere Dosage-Elemente sind nur zulässig, wenn sich die Dosis (Wert) unterscheidet. ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).all( ( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ) implies ( ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).count() = 1 ) or ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).doseAndRate.dose.ofType(Quantity).value.distinct().count() > 1 ) ) )
dom-2 error MedicationRequest If the resource is contained in another resource, it SHALL NOT contain nested Resources contained.contained.empty()
dom-3 error MedicationRequest If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4 error MedicationRequest If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5 error MedicationRequest If a resource is contained in another resource, it SHALL NOT have a security label contained.meta.security.empty()
dom-6 best practice MedicationRequest A resource should have narrative for robust management text.`div`.exists()
dsg-1 error MedicationRequest.dosageInstruction If present, dosage must include free text or structured data text.exists() or doseAndRate.exists()
ele-1 error **ALL** elements All FHIR elements must have a @value or children hasValue() or (children().count() > id.count())
ext-1 error **ALL** extensions Must have either extensions or value[x], not both extension.exists() != value.exists()
qty-3 error MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.low, MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.high, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.low, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRatio.numerator, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRatio.denominator, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.low, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateQuantity, MedicationRequest.dosageInstruction.maxDosePerPeriod.numerator, MedicationRequest.dosageInstruction.maxDosePerPeriod.denominator, MedicationRequest.dosageInstruction.maxDosePerAdministration If a code for the unit is present, the system SHALL also be present code.empty() or system.exists()
rat-1 error MedicationRequest.dosageInstruction.maxDosePerPeriod Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present (numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())
ref-1 error MedicationRequest.subject, MedicationRequest.encounter, MedicationRequest.supportingInformation, MedicationRequest.requester, MedicationRequest.reasonReference, MedicationRequest.reasonReference:Primaertumor, MedicationRequest.reasonReference:StuetzendeMolekulareAlteration, MedicationRequest.basedOn, MedicationRequest.priorPrescription SHALL have a contained resource if a local reference is provided reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
sqty-1 error MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.low, MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.high, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.low, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.low, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateQuantity, MedicationRequest.dosageInstruction.maxDosePerAdministration The comparator is not used on a SimpleQuantity comparator.empty()
tim-1 error MedicationRequest.dosageInstruction.timing.repeat if there's a duration, there needs to be duration units duration.empty() or durationUnit.exists()
tim-2 error MedicationRequest.dosageInstruction.timing.repeat if there's a period, there needs to be period units period.empty() or periodUnit.exists()
tim-4 error MedicationRequest.dosageInstruction.timing.repeat duration SHALL be a non-negative value duration.exists() implies duration >= 0
tim-5 error MedicationRequest.dosageInstruction.timing.repeat period SHALL be a non-negative value period.exists() implies period >= 0
tim-6 error MedicationRequest.dosageInstruction.timing.repeat If there's a periodMax, there must be a period periodMax.empty() or period.exists()
tim-7 error MedicationRequest.dosageInstruction.timing.repeat If there's a durationMax, there must be a duration durationMax.empty() or duration.exists()
tim-8 error MedicationRequest.dosageInstruction.timing.repeat If there's a countMax, there must be a count countMax.empty() or count.exists()
tim-9 error MedicationRequest.dosageInstruction.timing.repeat If there's an offset, there must be a when (and not C, CM, CD, CV) offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not()))
tim-10 error MedicationRequest.dosageInstruction.timing.repeat If there's a timeOfDay, there cannot be a when, or vice versa timeOfDay.empty() or when.empty()

Differential View

This structure is derived from MII_PR_Onko_Therapieempfehlung_Medikation

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. MedicationRequest 0..* MII_PR_Onko_Therapieempfehlung_Medikation Ordering of medication for patient or group
... Slices for extension Content/Rules for all slices
.... extension:Prioritaet S 0..1 decimal MII EX MTB Empfehlung Priorität
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-prioritaet
.... extension:Evidenzgraduierung S 0..1 CodeableConcept MII EX MTB Empfehlung Evidenzgraduierung
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-evidenzgraduierung
.... extension:Publikation S 0..* Identifier MII EX MTB Empfehlung Publikation
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-publikation
... status 1..1 code active | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown
... intent 1..1 code proposal | option
.... reasonReference:StuetzendeMolekulareAlteration S 0..* Reference(MII PR Patho Finding | MII PR MolGen Variante | MII PR Onkologie Genetische Variante | Observation) Stützende molekulare Alterationen

doco Documentation for this format

Snapshot View

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. MedicationRequest 0..* MII_PR_Onko_Therapieempfehlung_Medikation Ordering of medication for patient or group
... id SΣ 0..1 id Logical id of this artifact
... meta SΣ 0..1 Meta Metadata about the resource
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... versionId Σ 0..1 id Version specific identifier
.... lastUpdated Σ 0..1 instant When the resource version last changed
.... source SΣ 0..1 uri Identifies where the resource comes from
.... profile SΣ 0..* canonical(StructureDefinition) Profiles this resource claims to conform to
.... security Σ 0..* Coding Security Labels applied to this resource
Binding: All Security Labels (extensible): Security Labels from the Healthcare Privacy and Security Classification System.
.... tag Σ 0..* Coding Tags applied to this resource
Binding: CommonTags (example): Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... language 0..1 code Language of the resource content
Binding: CommonLanguages (preferred): A human language.
Additional BindingsPurpose
AllLanguages Max Binding
... text 0..1 Narrative Text summary of the resource, for human interpretation
This profile does not constrain the narrative in regard to content, language, or traceability to data elements
... contained 0..* Resource Contained, inline Resources
... Slices for extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... extension:Prioritaet S 0..1 decimal MII EX MTB Empfehlung Priorität
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-prioritaet
.... extension:Evidenzgraduierung S 0..1 CodeableConcept MII EX MTB Empfehlung Evidenzgraduierung
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-evidenzgraduierung
.... extension:Publikation S 0..* Identifier MII EX MTB Empfehlung Publikation
URL: https://www.medizininformatik-initiative.de/fhir/ext/modul-mtb/StructureDefinition/mii-ex-mtb-empfehlung-publikation
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
Slice: Unordered, Open by value:url
... identifier S 0..* Identifier Identifikator
... status ?!SΣ 1..1 code active | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown
Binding: medicationrequest Status (required): A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription.
... statusReason 0..1 CodeableConcept Reason for current status
Binding: medicationRequest Status Reason Codes (example): Identifies the reasons for a given status.
... intent ?!SΣ 1..1 code proposal | option
Binding: medicationRequest Intent (required): The kind of medication order.
... category 0..* CodeableConcept Type of medication usage
Binding: medicationRequest Category Codes (example): A coded concept identifying the category of medication request. For example, where the medication is to be consumed or administered, or the type of medication treatment.
... priority Σ 0..1 code routine | urgent | asap | stat
Binding: RequestPriority (required): Identifies the level of importance to be assigned to actioning the request.
... reported[x] Σ 0..1 Reported rather than primary record
.... reportedBoolean boolean
.... reportedReference Reference(Patient | Practitioner | PractitionerRole | RelatedPerson | Organization)
... Slices for medication[x] SΣ 1..1 Medikation
Slice: Unordered, Open by type:$this
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.
.... medicationCodeableConcept CodeableConcept
.... medicationReference Reference(Medication)
.... medication[x]:medicationReference SΣ 0..1 Reference(MII PR Medikation Medication) Medication to be taken
.... medication[x]:medicationCodeableConcept SΣ 1..1 CodeableConcept Medication to be taken
Binding: SNOMEDCTMedicationCodes (example): A coded concept identifying substance or product that can be ordered.
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... Slices for coding SΣ 1..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:Pharmazentralnummer SΣ 0..* Coding PZN Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fhir.de/CodeSystem/ifa/pzn
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
...... coding:atcClassDe SΣ 0..* Coding ATC Code
Binding: MII VS Medikation ATC (required)

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fhir.de/CodeSystem/bfarm/atc
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
...... coding:atcClassEn SΣ 0..* Coding ATC WHO Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://www.whocc.no/atc
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
...... coding:UNII SΣ 0..* Coding Unique Ingredient Identifier

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://fdasis.nlm.nih.gov
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
..... text SΣ 0..1 string Plain text representation of the concept
... subject SΣC 1..1 Reference(Patient) Who or group medication request is for
Constraints: ref-1
... encounter SC 0..1 Reference(Encounter) Fall / Kontakt
Constraints: ref-1
... supportingInformation SC 0..* Reference(Resource) Information to support ordering of the medication
Constraints: ref-1
... authoredOn SΣ 1..1 dateTime Datum der Verordnung
... requester SΣC 0..1 Reference(Practitioner | PractitionerRole | Organization | Patient | RelatedPerson | Device) Anforderer
Constraints: ref-1
... performer C 0..1 Reference(Practitioner | PractitionerRole | Organization | Patient | Device | RelatedPerson | CareTeam) Intended performer of administration
Constraints: ref-1
... performerType Σ 0..1 CodeableConcept Desired kind of performer of the medication administration
Binding: ProcedurePerformerRoleCodes (example): Identifies the type of individual that is desired to administer the medication.
... recorder C 0..1 Reference(Practitioner | PractitionerRole) Auftragserfasser
Constraints: ref-1
... reasonCode S 0..* CodeableConcept Grund Code
Binding: Condition/Problem/DiagnosisCodes (example): A coded concept indicating why the medication was ordered.
... Slices for reasonReference SC 1..* Reference(MII PR Onkologie Diagnose Primärtumor | Condition | Observation) Grund Referenz
Slice: Unordered, Open by profile:$this.resolve()
Constraints: ref-1
.... reasonReference:Primaertumor SC 1..1 Reference(MII PR Onkologie Diagnose Primärtumor) Grund Referenz
Constraints: ref-1
.... reasonReference:StuetzendeMolekulareAlteration SC 0..* Reference(MII PR Patho Finding | MII PR MolGen Variante | MII PR Onkologie Genetische Variante | Observation) Stützende molekulare Alterationen
Constraints: ref-1
... instantiatesCanonical Σ 0..* canonical() Instantiates FHIR protocol or definition
... instantiatesUri Σ 0..* uri Instantiates external protocol or definition
... basedOn SΣC 0..* Reference(CarePlan | MedicationRequest | ServiceRequest | ImmunizationRecommendation) Basiert auf
Constraints: ref-1
... groupIdentifier Σ 0..1 Identifier Composite request this is part of
... courseOfTherapyType 0..1 CodeableConcept Overall pattern of medication administration
Binding: medicationRequest Course of Therapy Codes (example): Identifies the overall pattern of medication administratio.
... insurance C 0..* Reference(Coverage | ClaimResponse) Associated insurance coverage
Constraints: ref-1
... note S 0..* Annotation Hinweis
... dosageInstruction SC 0..* DosageDE(1.0.3) Dosierungsanweisung
Constraints: DosageStructuredOrFreeTextWarning, DosageStructuredRequiresBoth, DosageDoseUnitSameCode, DosageWarnungViererschemaInText, FreeTextSingleDosageOnlyWarning, dsg-1
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... sequence SΣ 0..1 integer The order of the dosage instructions
.... text SΣ 0..1 string Freitext-Dosierungsanweisungen, z. B. 'Maximal 3x täglich 1 Stück bei Bedarf'
.... additionalInstruction Σ 0..* CodeableConcept Supplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness"
Binding: SNOMEDCTAdditionalDosageInstructions (example): A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery".
.... patientInstruction Σ 0..1 string Patient or consumer oriented instructions
.... timing SΣ 0..1 TimingDE(1.0.3) Wann das Medikament verabreicht werden soll
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... event SΣ 0..* dateTime When the event occurs
..... repeat SΣC 0..1 Element Wann das Ereignis stattfinden soll
Constraints: tim-9, tim-5, tim-6, tim-7, tim-8, tim-1, tim-10, tim-2, tim-4, TimingSingleDosageForTimeOfDay, TimingSingleDosageForWhen, TimingBoundsUnitMatchesCode
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... Slices for bounds[x] SΣ 0..1 Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
Slice: Unordered, Open by type:$this
....... boundsDuration Duration
....... boundsRange Range
....... boundsPeriod Period
....... bounds[x]:boundsDuration SΣ 0..1 Duration Dauer der Dosieranweisung ausgedrückt in UCUM-Einheiten
Required Pattern: At least the following
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
........ value 0..1 decimal Numerical value (with implicit precision)
........ comparator 0..1 code < | <= | >= | > - how to understand the value
........ unit 0..1 string Unit representation
........ system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
........ code 0..1 code Coded form of the unit
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri UCUM-Einheit für die Dauer
Fixed Value: http://unitsofmeasure.org
........ code SΣ 1..1 code Coded form of the unit
....... bounds[x]:boundsRange SΣ 0..1 Range Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
Required Pattern: At least the following
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
......... value 0..1 decimal Numerical value (with implicit precision)
......... comparator 0..1 code < | <= | >= | > - how to understand the value
......... unit 0..1 string Unit representation
......... system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
......... code 0..1 code Coded form of the unit
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
......... value SΣ 1..1 decimal Numerical value (with implicit precision)
......... unit SΣ 0..1 string Unit representation
......... system SΣC 1..1 uri System that defines coded unit form
......... code SΣ 1..1 code Coded form of the unit
........ high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
Required Pattern: At least the following
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
......... value 0..1 decimal Numerical value (with implicit precision)
......... comparator 0..1 code < | <= | >= | > - how to understand the value
......... unit 0..1 string Unit representation
......... system 1..1 uri System that defines coded unit form
Fixed Value: http://unitsofmeasure.org
......... code 0..1 code Coded form of the unit
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
......... value SΣ 1..1 decimal Numerical value (with implicit precision)
......... unit SΣ 0..1 string Unit representation
......... system SΣC 1..1 uri System that defines coded unit form
......... code SΣ 1..1 code Coded form of the unit
....... bounds[x]:boundsPeriod SΣ 0..1 Period Länge/Bereich der Längen oder (Start- und/oder End-)Grenzen
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ start SΣC 0..1 dateTime Starting time with inclusive boundary
........ end SΣC 0..1 dateTime End time with inclusive boundary, if not ongoing
...... count SΣ 0..1 positiveInt Number of times to repeat
...... countMax SΣ 0..1 positiveInt Maximum number of times to repeat
...... duration SΣ 0..1 decimal How long when it happens
...... durationMax SΣ 0..1 decimal How long when it happens (Max)
...... durationUnit SΣ 0..1 code s | min | h | d | wk | mo | a - unit of time (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).
...... frequency SΣ 0..1 positiveInt Ereignis tritt frequency-mal pro Zeitraum auf
...... frequencyMax SΣ 0..1 positiveInt Event occurs up to frequencyMax times per period
...... period SΣ 0..1 decimal Ereignis tritt frequency-mal pro Zeitraum auf
...... periodMax SΣ 0..1 decimal Upper limit of period (3-4 hours)
...... periodUnit SΣ 0..1 code s | min | h | d | wk | mo | a - Zeiteinheit (UCUM)
Binding: UnitsOfTime (required): A unit of time (units from UCUM).
...... dayOfWeek SΣ 0..* code mon | tue | wed | thu | fri | sat | sun
Binding: DaysOfWeek (required)
...... timeOfDay SΣ 0..* time Tageszeit für die Aktion
...... when SΣ 0..* code Code für den Zeitraum des Auftretens
Binding: EventTiming (required): Real world event relating to the schedule.
...... offset SΣ 0..1 unsignedInt Minutes from event (before or after)
..... code Σ 0..1 CodeableConcept BID | TID | QID | AM | PM | QD | QOD | +
Binding: TimingAbbreviation (preferred): Code for a known / defined timing pattern.
.... Slices for asNeeded[x] SΣ 0..1 Take "as needed" (for x)
Slice: Unordered, Open by type:$this
Binding: SNOMEDCTMedicationAsNeededReasonCodes (example): A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.
..... asNeededBoolean boolean
..... asNeededCodeableConcept CodeableConcept
..... asNeeded[x]:asNeededBoolean SΣ 0..1 boolean Take "as needed" (for x)
..... asNeeded[x]:asNeededCodeableConcept SΣ 0..1 CodeableConcept Take "as needed" (for x)
Binding: SNOMEDCTMedicationAsNeededReasonCodes (example): A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.
.... site SΣ 0..1 CodeableConcept Verabreichungsort
Binding: SNOMEDCTAnatomicalStructureForAdministrationSiteCodes (example): A coded concept describing the site location the medicine enters into or onto the body.
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... Slices for coding SΣ 0..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:SNOMED SΣ 0..* Coding SNOMED CT Code
Binding: Target Site - IPS . (example): target site IPS

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://snomed.info/sct
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
..... text Σ 0..1 string Plain text representation of the concept
.... route SΣ 0..1 CodeableConcept Verabreichungsweg
Binding: SNOMEDCTRouteCodes (example): A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject.
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... Slices for coding SΣ 0..* Coding Code defined by a terminology system
Slice: Unordered, Open by pattern:$this
...... coding:EDQM SΣ 0..1 Coding EDQM Code
Binding: Medicine EDQM Route of Administration - IPS (preferred): EDQM Standard Terms

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://standardterms.edqm.eu
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
...... coding:SNOMED SΣ 0..1 Coding SNOMED CT Code

Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... system 1..1 uri Identity of the terminology system
Fixed Value: http://snomed.info/sct
....... version 0..1 string Version of the system - if relevant
....... code 0..1 code Symbol in syntax defined by the system
....... display 0..1 string Representation defined by the system
....... userSelected 0..1 boolean If this coding was chosen directly by the user
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... system SΣ 1..1 uri Identity of the terminology system
....... version Σ 0..1 string Version of the system - if relevant
....... code SΣ 1..1 code Symbol in syntax defined by the system
....... display Σ 0..1 string Representation defined by the system
....... userSelected Σ 0..1 boolean If this coding was chosen directly by the user
..... text Σ 0..1 string Plain text representation of the concept
.... method Σ 0..1 CodeableConcept Technique for administering medication
Binding: SNOMEDCTAdministrationMethodCodes (example): A coded concept describing the technique by which the medicine is administered.
.... doseAndRate SΣ 0..* Element Menge des verabreichten Medikaments
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... type Σ 0..1 CodeableConcept The kind of dose or rate specified
Binding: DoseAndRateType (example): The kind of dose or rate specified.
..... Slices for dose[x] SΣ 0..1 Amount of medication per dose
Slice: Unordered, Open by type:$this
...... doseRange Range
...... doseQuantity Quantity(SimpleQuantity)
...... dose[x]:doseQuantity SΣC 0..1 SimpleQuantity Menge des Medikaments pro Dosis
Binding: Dosage DoseQuantity ValueSet (required)
Constraints: qty-3, sqty-1
...... dose[x]:doseRange SΣ 0..1 Range Amount of medication per dose
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
..... Slices for rate[x] SΣ 0..1 Amount of medication per unit of time
Slice: Unordered, Open by type:$this
...... rateRatio Ratio
...... rateRange Range
...... rateQuantity Quantity(SimpleQuantity)
...... rate[x]:rateRatio SΣ 0..1 Ratio Amount of medication per unit of time
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... numerator SΣC 0..1 Quantity Numerator value
Constraints: qty-3
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... denominator SΣC 0..1 Quantity Denominator value
Constraints: qty-3
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
...... rate[x]:rateRange SΣ 0..1 Range Amount of medication per unit of time
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... low SΣC 0..1 SimpleQuantity Low limit
Constraints: qty-3, sqty-1
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
....... high SΣC 0..1 SimpleQuantity High limit
Constraints: qty-3, sqty-1
........ id 0..1 string Unique id for inter-element referencing
........ extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
........ value SΣ 1..1 decimal Numerical value (with implicit precision)
........ unit SΣ 0..1 string Unit representation
........ system SΣC 1..1 uri System that defines coded unit form
........ code SΣ 1..1 code Coded form of the unit
...... rate[x]:rateQuantity SΣC 0..1 SimpleQuantity A fixed quantity (no comparator)
Constraints: qty-3, sqty-1
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
....... value SΣ 1..1 decimal Numerical value (with implicit precision)
....... unit SΣ 0..1 string Unit representation
....... system SΣC 1..1 uri System that defines coded unit form
....... code SΣ 1..1 code Coded form of the unit
.... maxDosePerPeriod SΣC 0..1 Ratio Upper limit on medication per unit of time
Constraints: rat-1
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... numerator SΣC 0..1 Quantity Numerator value
Constraints: qty-3
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... value SΣ 1..1 decimal Numerical value (with implicit precision)
...... comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
...... unit SΣ 0..1 string Unit representation
...... system SΣC 1..1 uri System that defines coded unit form
...... code SΣ 1..1 code Coded form of the unit
..... denominator SΣC 0..1 Quantity Denominator value
Constraints: qty-3
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... value SΣ 1..1 decimal Numerical value (with implicit precision)
...... comparator ?!Σ 0..1 code < | <= | >= | > - how to understand the value
Binding: QuantityComparator (required): How the Quantity should be understood and represented.
...... unit SΣ 0..1 string Unit representation
...... system SΣC 1..1 uri System that defines coded unit form
...... code SΣ 1..1 code Coded form of the unit
.... maxDosePerAdministration SΣC 0..1 SimpleQuantity Upper limit on medication per administration
Constraints: qty-3, sqty-1
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... value SΣ 1..1 decimal Numerical value (with implicit precision)
..... unit SΣ 0..1 string Unit representation
..... system SΣC 1..1 uri System that defines coded unit form
..... code SΣ 1..1 code Coded form of the unit
.... maxDosePerLifetime ΣC 0..1 SimpleQuantity Upper limit on medication per lifetime of the patient
Constraints: qty-3, sqty-1
... dispenseRequest 0..1 BackboneElement Medication supply authorization
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... initialFill 0..1 BackboneElement First fill details
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... quantity C 0..1 SimpleQuantity First fill quantity
Constraints: qty-3, sqty-1
..... duration C 0..1 Duration First fill duration
Constraints: qty-3, drt-1
.... dispenseInterval C 0..1 Duration Minimum period of time between dispenses
Constraints: qty-3, drt-1
.... validityPeriod C 0..1 Period Time period supply is authorized for
Constraints: per-1
.... numberOfRepeatsAllowed 0..1 unsignedInt Number of refills authorized
.... quantity C 0..1 SimpleQuantity Amount of medication to supply per dispense
Constraints: qty-3, sqty-1
.... expectedSupplyDuration C 0..1 Duration Number of days supply per dispense
Constraints: qty-3, drt-1
.... performer C 0..1 Reference(Organization) Intended dispenser
Constraints: ref-1
... substitution S 0..1 BackboneElement Substitution
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... Slices for allowed[x] S 1..1 Whether substitution is allowed or not
Slice: Unordered, Open by type:$this
Binding: ActSubstanceAdminSubstitutionCode (example): Identifies the type of substitution allowed.
..... allowedBoolean boolean
..... allowedCodeableConcept CodeableConcept
..... allowed[x]:allowedBoolean S 0..1 boolean Whether substitution is allowed or not
..... allowed[x]:allowedCodeableConcept S 0..1 CodeableConcept Whether substitution is allowed or not
Binding: ActSubstanceAdminSubstitutionCode (example): Identifies the type of substitution allowed.
.... reason 0..1 CodeableConcept Why should (not) substitution be made
Binding: SubstanceAdminSubstitutionReason (example): A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed.
... priorPrescription SC 0..1 Reference(MedicationRequest) Vorherige Verschreibung
Constraints: ref-1
... detectedIssue C 0..* Reference(DetectedIssue) Erkannte Probleme
Constraints: ref-1
... eventHistory C 0..* Reference(Provenance) A list of events of interest in the lifecycle
Constraints: ref-1

doco Documentation for this format

Terminology Bindings

Path Status Usage ValueSet Version Source
MedicationRequest.meta.​security Base extensible SecurityLabels 📦4.0.1 FHIR Std.
MedicationRequest.meta.​tag Base example Common Tags 📦4.0.1 FHIR Std.
MedicationRequest.language Base preferred Common Languages 📦4.0.1 FHIR Std.
MedicationRequest.status Base required Medicationrequest status 📍4.0.1 FHIR Std.
MedicationRequest.statusReason Base example Medication request status reason codes 📦4.0.1 FHIR Std.
MedicationRequest.intent Base required Medication request intent 📍4.0.1 FHIR Std.
MedicationRequest.category Base example Medication request category codes 📦4.0.1 FHIR Std.
MedicationRequest.priority Base required Request priority 📍4.0.1 FHIR Std.
MedicationRequest.medication[x] Base example SNOMED CT Medication Codes 📦4.0.1 FHIR Std.
MedicationRequest.medication[x]:medicationCodeableConcept Base example SNOMED CT Medication Codes 📦4.0.1 FHIR Std.
MedicationRequest.medication[x]:medicationCodeableConcept.​coding:atcClassDe Base required MII VS Medikation ATC 📦2026.0.0 MII IG Medikation v2026.0
MedicationRequest.performerType Base example Procedure Performer Role Codes 📦4.0.1 FHIR Std.
MedicationRequest.reasonCode Base example Condition/Problem/Diagnosis Codes 📦4.0.1 FHIR Std.
MedicationRequest.courseOfTherapyType Base example Medication request course of therapy codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​additionalInstruction Base example SNOMED CT Additional Dosage Instructions 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.bounds[x]:boundsDuration.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.durationUnit Base required UnitsOfTime 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.periodUnit Base required UnitsOfTime 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.dayOfWeek Base required DaysOfWeek 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.repeat.when Base required EventTiming 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​timing.code Base preferred TimingAbbreviation 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​asNeeded[x] Base example SNOMED CT Medication As Needed Reason Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​asNeeded[x]:asNeededCodeableConcept Base example SNOMED CT Medication As Needed Reason Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​site Base example SNOMED CT Anatomical Structure for Administration Site Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​site.coding:SNOMED Base example Target Site - IPS . ⏿1.1.0 tx.hl7europe.eu
MedicationRequest.dosageInstruction.​route Base example SNOMED CT Route Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​route.coding:EDQM Base preferred Medicine EDQM Route of Administration - IPS 📦2.0.0 International Patient Summary Implementation Guide v2.0
MedicationRequest.dosageInstruction.​method Base example SNOMED CT Administration Method Codes 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​doseAndRate.type Base example DoseAndRateType 📦4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​doseAndRate.dose[x]:doseQuantity Base required Dosage DoseQuantity ValueSet 📦1.0.3 Medication IG DE v1.0
MedicationRequest.dosageInstruction.​doseAndRate.rate[x]:rateRatio.​numerator.comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​doseAndRate.rate[x]:rateRatio.​denominator.comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​maxDosePerPeriod.numerator.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.dosageInstruction.​maxDosePerPeriod.denominator.​comparator Base required QuantityComparator 📍4.0.1 FHIR Std.
MedicationRequest.substitution.​allowed[x] Base example ActSubstanceAdminSubstitutionCode 📦3.0.0 THO v7.0
MedicationRequest.substitution.​allowed[x]:allowedCodeableConcept Base example ActSubstanceAdminSubstitutionCode 📦3.0.0 THO v7.0
MedicationRequest.substitution.​reason Base example SubstanceAdminSubstitutionReason 📦3.0.0 THO v7.0

Constraints

Id Grade Path(s) Description Expression
DosageDoseUnitSameCode error MedicationRequest.dosageInstruction Die Dosiereinheit muss über alle Dosierungen gleich sein. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( doseAndRate.exists() implies ( %resource.dosageInstruction.doseAndRate.dose.ofType(Quantity).code | %resource.dosageInstruction.doseAndRate.dose.ofType(Range).low.code | %resource.dosageInstruction.doseAndRate.dose.ofType(Range).high.code ).distinct().count() = 1 )
DosageStructuredOrFreeTextWarning warning MedicationRequest.dosageInstruction Die Dosierungsangabe darf entweder nur als Freitext oder nur als vollständige strukturierte Information erfolgen — eine Mischung ist nicht erlaubt. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( (text.exists() and timing.empty() and doseAndRate.empty()) or (text.empty() and (timing.exists() or doseAndRate.exists())) )
DosageStructuredRequiresBoth error MedicationRequest.dosageInstruction Wenn eine strukturierte Dosierungsangabe erfolgt, müssen sowohl timing als auch doseAndRate angegeben werden. (%resource.ofType(MedicationRequest).dosageInstruction | ofType(MedicationDispense).dosageInstruction | ofType(MedicationStatement).dosage).all( (timing.exists() implies doseAndRate.exists()) and (doseAndRate.exists() implies timing.exists()) )
DosageWarnungViererschemaInText warning MedicationRequest.dosageInstruction Hinweis: In Dosage.text wurde ein Viererschema (z. B. 1-1-1-1) erkannt. Bitte prüfen, ob dies strukturiert abgebildet werden kann. text.exists() implies text.matches('.*\\d+\\s*[-–]\\s*\\d+\\s*[-–]\\s*\\d+\\s*[-–]\\d+.*').not()
FreeTextSingleDosageOnlyWarning warning MedicationRequest.dosageInstruction Wenn eine Dosierung als reiner Freitext angegeben ist, soll nur genau ein Dosage-Element existieren. ( (%resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).exists(text.exists() and timing.empty() and doseAndRate.empty()) ) implies ( (%resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).count() = 1 )
TimingBoundsUnitMatchesCode error MedicationRequest.dosageInstruction.timing.repeat boundsDuration.unit muss zur UCUM boundsDuration.code passen (z. B. 'Woche(n)' nur mit code='wk'). bounds.ofType(Duration).exists().not() or ( ( bounds.ofType(Duration).code = 'd' implies ( bounds.ofType(Duration).unit = 'Tag(e)' or bounds.ofType(Duration).unit = 'Tag' or bounds.ofType(Duration).unit = 'Tage' ) ) and ( bounds.ofType(Duration).code = 'wk' implies ( bounds.ofType(Duration).unit = 'Woche(n)' or bounds.ofType(Duration).unit = 'Woche' or bounds.ofType(Duration).unit = 'Wochen' ) ) and ( bounds.ofType(Duration).code = 'mo' implies ( bounds.ofType(Duration).unit = 'Monat(e)' or bounds.ofType(Duration).unit = 'Monat' or bounds.ofType(Duration).unit = 'Monate' ) ) and ( bounds.ofType(Duration).code = 'a' implies ( bounds.ofType(Duration).unit = 'Jahr(e)' or bounds.ofType(Duration).unit = 'Jahr' or bounds.ofType(Duration).unit = 'Jahre' ) ) )
TimingSingleDosageForTimeOfDay error MedicationRequest.dosageInstruction.timing.repeat Wenn nur timeOfDay verwendet wird und täglich dosiert wird, ist die Angabe in einem einzigen Dosage-Element zu modellieren. Mehrere Dosage-Elemente sind nur zulässig, wenn sich die Dosis (Wert) unterscheidet. ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).all( ( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ) implies ( ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).count() = 1 ) or ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.timeOfDay.exists() and timing.repeat.when.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).doseAndRate.dose.ofType(Quantity).value.distinct().count() > 1 ) ) )
TimingSingleDosageForWhen error MedicationRequest.dosageInstruction.timing.repeat Wenn nur when verwendet wird und täglich dosiert wird, ist die Angabe in einem einzigen Dosage-Element zu modellieren. Mehrere Dosage-Elemente sind nur zulässig, wenn sich die Dosis (Wert) unterscheidet. ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).all( ( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ) implies ( ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).count() = 1 ) or ( ( %resource.ofType(MedicationRequest).dosageInstruction | %resource.ofType(MedicationDispense).dosageInstruction | %resource.ofType(MedicationStatement).dosage ).where( timing.repeat.dayOfWeek.empty() and timing.repeat.when.exists() and timing.repeat.timeOfDay.empty() and (timing.repeat.period.exists() and timing.repeat.period = 1) and (timing.repeat.periodUnit.exists() and timing.repeat.periodUnit = 'd') ).doseAndRate.dose.ofType(Quantity).value.distinct().count() > 1 ) ) )
dom-2 error MedicationRequest If the resource is contained in another resource, it SHALL NOT contain nested Resources contained.contained.empty()
dom-3 error MedicationRequest If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4 error MedicationRequest If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5 error MedicationRequest If a resource is contained in another resource, it SHALL NOT have a security label contained.meta.security.empty()
dom-6 best practice MedicationRequest A resource should have narrative for robust management text.`div`.exists()
drt-1 error MedicationRequest.dispenseRequest.initialFill.duration, MedicationRequest.dispenseRequest.dispenseInterval, MedicationRequest.dispenseRequest.expectedSupplyDuration There SHALL be a code if there is a value and it SHALL be an expression of time. If system is present, it SHALL be UCUM. code.exists() implies ((system = %ucum) and value.exists())
dsg-1 error MedicationRequest.dosageInstruction If present, dosage must include free text or structured data text.exists() or doseAndRate.exists()
ele-1 error **ALL** elements All FHIR elements must have a @value or children hasValue() or (children().count() > id.count())
ext-1 error **ALL** extensions Must have either extensions or value[x], not both extension.exists() != value.exists()
per-1 error MedicationRequest.dispenseRequest.validityPeriod If present, start SHALL have a lower value than end start.hasValue().not() or end.hasValue().not() or (start <= end)
qty-3 error MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.low, MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.high, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.low, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRatio.numerator, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRatio.denominator, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.low, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateQuantity, MedicationRequest.dosageInstruction.maxDosePerPeriod.numerator, MedicationRequest.dosageInstruction.maxDosePerPeriod.denominator, MedicationRequest.dosageInstruction.maxDosePerAdministration, MedicationRequest.dosageInstruction.maxDosePerLifetime, MedicationRequest.dispenseRequest.initialFill.quantity, MedicationRequest.dispenseRequest.initialFill.duration, MedicationRequest.dispenseRequest.dispenseInterval, MedicationRequest.dispenseRequest.quantity, MedicationRequest.dispenseRequest.expectedSupplyDuration If a code for the unit is present, the system SHALL also be present code.empty() or system.exists()
rat-1 error MedicationRequest.dosageInstruction.maxDosePerPeriod Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present (numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists())
ref-1 error MedicationRequest.subject, MedicationRequest.encounter, MedicationRequest.supportingInformation, MedicationRequest.requester, MedicationRequest.performer, MedicationRequest.recorder, MedicationRequest.reasonReference, MedicationRequest.reasonReference:Primaertumor, MedicationRequest.reasonReference:StuetzendeMolekulareAlteration, MedicationRequest.basedOn, MedicationRequest.insurance, MedicationRequest.dispenseRequest.performer, MedicationRequest.priorPrescription, MedicationRequest.detectedIssue, MedicationRequest.eventHistory SHALL have a contained resource if a local reference is provided reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))
sqty-1 error MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.low, MedicationRequest.dosageInstruction.timing.repeat.bounds[x]:boundsRange.high, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseQuantity, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.low, MedicationRequest.dosageInstruction.doseAndRate.dose[x]:doseRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.low, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateRange.high, MedicationRequest.dosageInstruction.doseAndRate.rate[x]:rateQuantity, MedicationRequest.dosageInstruction.maxDosePerAdministration, MedicationRequest.dosageInstruction.maxDosePerLifetime, MedicationRequest.dispenseRequest.initialFill.quantity, MedicationRequest.dispenseRequest.quantity The comparator is not used on a SimpleQuantity comparator.empty()
tim-1 error MedicationRequest.dosageInstruction.timing.repeat if there's a duration, there needs to be duration units duration.empty() or durationUnit.exists()
tim-2 error MedicationRequest.dosageInstruction.timing.repeat if there's a period, there needs to be period units period.empty() or periodUnit.exists()
tim-4 error MedicationRequest.dosageInstruction.timing.repeat duration SHALL be a non-negative value duration.exists() implies duration >= 0
tim-5 error MedicationRequest.dosageInstruction.timing.repeat period SHALL be a non-negative value period.exists() implies period >= 0
tim-6 error MedicationRequest.dosageInstruction.timing.repeat If there's a periodMax, there must be a period periodMax.empty() or period.exists()
tim-7 error MedicationRequest.dosageInstruction.timing.repeat If there's a durationMax, there must be a duration durationMax.empty() or duration.exists()
tim-8 error MedicationRequest.dosageInstruction.timing.repeat If there's a countMax, there must be a count countMax.empty() or count.exists()
tim-9 error MedicationRequest.dosageInstruction.timing.repeat If there's an offset, there must be a when (and not C, CM, CD, CV) offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not()))
tim-10 error MedicationRequest.dosageInstruction.timing.repeat If there's a timeOfDay, there cannot be a when, or vice versa timeOfDay.empty() or when.empty()

 

Other representations of profile: CSV, Excel, Schematron