CH PDQm Match Input Parameters Profile - Definitions - CH EPR FHIR (R4) v4.0.1-ballot-2

CH EPR FHIR (R4), published by eHealth Suisse. This guide is not an authorized publication; it is the continuous build for version 4.0.1-ballot-2 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/ehealthsuisse/ch-epr-fhir/ and changes regularly. See the Directory of published versions

Resource Profile: CHPDQmMatchParametersIn - Detailed Descriptions

Active as of 2024-11-19

Definitions for the CHPDQmMatchParametersIn resource profile.

Differential Elements Table
Key Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here

0. Parameters
2. Parameters.parameter:resource
Slice Name	resource
4. Parameters.parameter:resource.resource
Type	Patient(CH PDQm Patient Profile for $match Input)

Guidance on how to interpret the contents of this table can be found here

0. Parameters
Definition	This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.
Short	Operation Request or Response
Comments	The parameters that may be used are defined by the OperationDefinition resource.
Control	0..*
Is Modifier	false
Summary	false
2. Parameters.implicitRules
Definition	A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Short	A set of rules under which this content was created
Comments	Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Control	0..01
Type	uri
Is Modifier	true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Parameters.parameter
Definition	A parameter passed to or received from the operation.
Short	Operation Parameter
Control	10..3*
Type	BackboneElement
Is Modifier	false
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) inv-1: A parameter must have one and only one of (value, resource, part) (`(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))`) inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
Slicing	This element introduces a set of slices on `Parameters.parameter`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: value @ name
6. Parameters.parameter.modifierExtension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short	ExtensionExtensions that cannot be ignored even if unrecognized
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary	true
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names	extensions, user content, modifiers
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Parameters.parameter.name
Definition	The name of the parameter (reference to the operation definition).
Short	Name from the definition
Control	1..1
Type	string
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Parameters.parameter:resource
Slice Name	resource
Definition	A parameter passed to or received from the operation.
Short	Operation Parameter
Control	10..1*
Type	BackboneElement
Is Modifier	false
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) inv-1: A parameter must have one and only one of (value, resource, part) (`(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))`) inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
12. Parameters.parameter:resource.modifierExtension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short	ExtensionExtensions that cannot be ignored even if unrecognized
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary	true
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names	extensions, user content, modifiers
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Parameters.parameter:resource.name
Definition	The name of the parameter (reference to the operation definition).
Short	Name from the definition
Control	1..1
Type	string
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Pattern Value	`resource`
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Parameters.parameter:resource.value[x]
Definition	If the parameter is a data type.
Short	If parameter is a data type
Control	0..01 This element is affected by the following invariants: inv-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Parameters.parameter:resource.resource
Definition	Demographics and other administrative information about an individual or animal receiving care or other health-related services. If the parameter is a whole resource.
Short	Information about an individual or animal receiving health care servicesIf parameter is a whole resource
Comments	When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.
Control	10..1 This element is affected by the following invariants: inv-1
Type	PatientResource(CH PDQm Patient Profile for $match Input)
Is Modifier	false
Summary	false
Alternate Names	SubjectOfCare Client Resident
Invariants	dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (`contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (`contained.meta.security.empty()`) dom-6: A resource should have narrative for robust management (text.`div`.exists())
20. Parameters.parameter:resource.part
Definition	A named part of a multi-part parameter.
Short	Named part of a multi-part parameter
Comments	Only one level of nested parameters is allowed.
Control	0..0*
Type	Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifier	false
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Parameters.parameter:onlyCertainMatches
Slice Name	onlyCertainMatches
Definition	A parameter passed to or received from the operation.
Short	Operation Parameter
Control	0..1*
Type	BackboneElement
Is Modifier	false
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) inv-1: A parameter must have one and only one of (value, resource, part) (`(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))`) inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
24. Parameters.parameter:onlyCertainMatches.modifierExtension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short	ExtensionExtensions that cannot be ignored even if unrecognized
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary	true
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names	extensions, user content, modifiers
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
26. Parameters.parameter:onlyCertainMatches.name
Definition	The name of the parameter (reference to the operation definition).
Short	Name from the definition
Control	1..1
Type	string
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Pattern Value	`onlyCertainMatches`
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Parameters.parameter:onlyCertainMatches.value[x]
Definition	If the parameter is a data type.
Short	If parameter is a data type
Control	10..1 This element is affected by the following invariants: inv-1
Type	boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Parameters.parameter:onlyCertainMatches.resource
Definition	If the parameter is a whole resource.
Short	If parameter is a whole resource
Comments	When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.
Control	0..01 This element is affected by the following invariants: inv-1
Type	Resource
Is Modifier	false
Summary	true
32. Parameters.parameter:onlyCertainMatches.part
Definition	A named part of a multi-part parameter.
Short	Named part of a multi-part parameter
Comments	Only one level of nested parameters is allowed.
Control	0..0*
Type	Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifier	false
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Parameters.parameter:count
Slice Name	count
Definition	A parameter passed to or received from the operation.
Short	Operation Parameter
Control	0..1*
Type	BackboneElement
Is Modifier	false
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) inv-1: A parameter must have one and only one of (value, resource, part) (`(part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))`) inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
36. Parameters.parameter:count.modifierExtension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short	ExtensionExtensions that cannot be ignored even if unrecognized
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary	true
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names	extensions, user content, modifiers
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Parameters.parameter:count.name
Definition	The name of the parameter (reference to the operation definition).
Short	Name from the definition
Control	1..1
Type	string
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Pattern Value	`count`
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Parameters.parameter:count.value[x]
Definition	If the parameter is a data type.
Short	If parameter is a data type
Control	10..1 This element is affected by the following invariants: inv-1
Type	integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Parameters.parameter:count.resource
Definition	If the parameter is a whole resource.
Short	If parameter is a whole resource
Comments	When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.
Control	0..01 This element is affected by the following invariants: inv-1
Type	Resource
Is Modifier	false
Summary	true
44. Parameters.parameter:count.part
Definition	A named part of a multi-part parameter.
Short	Named part of a multi-part parameter
Comments	Only one level of nested parameters is allowed.
Control	0..0*
Type	Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifier	false
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Parameters

Definition

This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

Short Operation Request or Response

Comments

The parameters that may be used are defined by the OperationDefinition resource.

Control 0..*

Is Modifier false

Summary false

2. Parameters.id

Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Short Logical id of this artifact

Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control 0..1