HRSA 2023 Uniform Data System (UDS) Patient Level Submission (PLS) (UDS+) FHIR IG
1.1.0 - STU1 Release 1.1 - Standard for Trial-Use
HRSA 2023 Uniform Data System (UDS) Patient Level Submission (PLS) (UDS+) FHIR IG, published by HRSA BPHC. This guide is not an authorized publication; it is the continuous build for version 1.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/drajer-health/uds-plus/ and changes regularly. See the Directory of published versions
Page standards status: Trial-use | Maturity Level: 2 |
Definitions for the uds-plus-location resource profile.
Guidance on how to interpret the contents of this table can be found here
0. Location | |
Definition | Indicates the location where the service was provided |
Short | Indicates the location where the service was provided |
2. Location.type | |
Control | 0..* |
Binding | Unless not suitable, these codes SHALL be taken from Uds Plus Service Delivery Codes (extensible to http://fhir.org/guides/hrsa/uds-plus/ValueSet/uds-plus-service-delivery-codes )The set of codes indicating the location of service |
Must Support | true |
Guidance on how to interpret the contents of this table can be found here
0. Location | |
Definition | Indicates the location where the service was provided Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated. |
Short | Indicates the location where the service was providedDetails and position information for a physical place |
Comments | - |
Control | 0..* |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) |
2. Location.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. Location.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Summary | false |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
6. Location.status | |
Definition | The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location. |
Short | active | suspended | inactive |
Control | 0..1 |
Binding | The codes SHALL be taken from LocationStatushttp://hl7.org/fhir/ValueSet/location-status|4.0.1 (required to http://hl7.org/fhir/ValueSet/location-status|4.0.1 )Indicates whether the location is still in use. |
Type | code |
Is Modifier | true because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
8. Location.name | |
Definition | Name of the location as used by humans. Does not need to be unique. |
Short | Name of the location as used by humans |
Comments | If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches. |
Control | 10..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. Location.type | |
Definition | Indicates the type of function performed at the location. |
Short | Type of function performed |
Control | 0..* |
Binding | Unless not suitable, these codes SHALL be taken from Uds Plus Service Delivery Codeshttp://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType (extensible to http://fhir.org/guides/hrsa/uds-plus/ValueSet/uds-plus-service-delivery-codes )The set of codes indicating the location of service Indicates the type of function performed at the location. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. Location.telecom | |
Definition | The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites. |
Short | Contact details of the location |
Control | 0..* |
Type | ContactPoint |
Is Modifier | false |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. Location.address | |
Definition | Physical location. |
Short | Physical location |
Comments | Additional addresses should be recorded using another instance of the Location resource, or via the Organization. |
Control | 0..1 |
Type | Address |
Is Modifier | false |
Must Support | true |
Summary | false |
Requirements | If locations can be visited, we need to keep track of their address. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. Location.address.use | |
Definition | The purpose of this address. |
Short | home | work | temp | old | billing - purpose of this address |
Comments | Applications can assume that an address is current unless it explicitly says that it is temporary or old. |
Control | 0..1 |
Binding | The codes SHALL be taken from AddressUsehttp://hl7.org/fhir/ValueSet/address-use|4.0.1 (required to http://hl7.org/fhir/ValueSet/address-use|4.0.1 )The use of an address. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows an appropriate address to be chosen from a list of many. |
Example | <br/><b>General</b>:home |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. Location.address.line | |
Definition | This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information. |
Short | Street name, number, direction & P.O. Box etc. |
Control | 0..* |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Example | <br/><b>General</b>:137 Nowhere Street |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. Location.address.city | |
Definition | The name of the city, town, suburb, village or other community or delivery center. |
Short | Name of city, town etc. |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Alternate Names | Municpality |
Example | <br/><b>General</b>:Erewhon |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. Location.address.state | |
Definition | Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes). |
Short | Sub-unit of country (abbreviations ok) |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from For codes, see USPS Two Letter Alphabetic Codes (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state )Two letter USPS alphabetic codes. |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Alternate Names | Province, Territory |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
24. Location.address.postalCode | |
Definition | A postal code designating a region defined by the postal service. |
Short | US Zip CodesPostal code for area |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Alternate Names | Zip |
Example | <br/><b>General</b>:9132 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
26. Location.managingOrganization | |
Definition | The organization responsible for the provisioning and upkeep of the location. |
Short | Organization responsible for provisioning and upkeep |
Comments | This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource. |
Control | 0..1 |
Type | Reference(US Core Organization Profile, Organization) |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | Need to know who manages the location. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. Location | |||||
Definition | Indicates the location where the service was provided | ||||
Short | Indicates the location where the service was provided | ||||
Comments | - | ||||
Control | 0..* | ||||
Is Modifier | false | ||||
Must Support | false | ||||
Summary | false | ||||
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() ) | ||||
2. Location.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Short | Logical id of this artifact | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
Control | 0..1 | ||||
Type | id | ||||
Is Modifier | false | ||||
Summary | true | ||||
4. Location.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Short | Metadata about the resource | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
6. Location.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Short | A set of rules under which this content was created | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
8. Location.language | |||||
Definition | The base language in which the resource is written. | ||||
Short | Language of the resource content | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
10. Location.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Short | Text summary of the resource, for human interpretation | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
12. Location.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Short | Contained, inline Resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
14. Location.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
16. Location.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them | ||||
Summary | false | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
18. Location.identifier | |||||
Definition | Unique code or number identifying the location to its users. | ||||
Short | Unique code or number identifying the location to its users | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Organization label locations in registries, need to keep track of those. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
20. Location.status | |||||
Definition | The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location. | ||||
Short | active | suspended | inactive | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from LocationStatus (required to http://hl7.org/fhir/ValueSet/location-status|4.0.1 )Indicates whether the location is still in use. | ||||
Type | code | ||||
Is Modifier | true because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
22. Location.operationalStatus | |||||
Definition | The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance. | ||||
Short | The operational status of the location (typically only for a bed/room) | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from hl7VS-bedStatus (preferred to http://terminology.hl7.org/ValueSet/v2-0116 )The operational status if the location (where typically a bed/room). | ||||
Type | Coding | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
24. Location.name | |||||
Definition | Name of the location as used by humans. Does not need to be unique. | ||||
Short | Name of the location as used by humans | ||||
Comments | If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches. | ||||
Control | 1..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
26. Location.alias | |||||
Definition | A list of alternate names that the location is known as, or was known as, in the past. | ||||
Short | A list of alternate names that the location is known as, or was known as, in the past | ||||
Comments | There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location. | ||||
Control | 0..* | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the location was known by can be very useful. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
28. Location.description | |||||
Definition | Description of the Location, which helps in finding or referencing the place. | ||||
Short | Additional details about the location that could be displayed as further information to identify the location beyond its name | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Humans need additional information to verify a correct location has been identified. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
30. Location.mode | |||||
Definition | Indicates whether a resource instance represents a specific location or a class of locations. | ||||
Short | instance | kind | ||||
Comments | This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from LocationMode (required to http://hl7.org/fhir/ValueSet/location-mode|4.0.1 )Indicates whether a resource instance represents a specific location or a class of locations. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
32. Location.type | |||||
Definition | Indicates the type of function performed at the location. | ||||
Short | Type of function performed | ||||
Control | 0..* | ||||
Binding | Unless not suitable, these codes SHALL be taken from Uds Plus Service Delivery Codes (extensible to http://fhir.org/guides/hrsa/uds-plus/ValueSet/uds-plus-service-delivery-codes )The set of codes indicating the location of service | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
34. Location.telecom | |||||
Definition | The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites. | ||||
Short | Contact details of the location | ||||
Control | 0..* | ||||
Type | ContactPoint | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
36. Location.address | |||||
Definition | Physical location. | ||||
Short | Physical location | ||||
Comments | Additional addresses should be recorded using another instance of the Location resource, or via the Organization. | ||||
Control | 0..1 | ||||
Type | Address | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | If locations can be visited, we need to keep track of their address. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
38. Location.address.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
40. Location.address.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Location.address.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
42. Location.address.use | |||||
Definition | The purpose of this address. | ||||
Short | home | work | temp | old | billing - purpose of this address | ||||
Comments | Applications can assume that an address is current unless it explicitly says that it is temporary or old. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from AddressUse (required to http://hl7.org/fhir/ValueSet/address-use|4.0.1 )The use of an address. | ||||
Type | code | ||||
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Allows an appropriate address to be chosen from a list of many. | ||||
Example | <br/><b>General</b>:home | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
44. Location.address.type | |||||
Definition | Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both. | ||||
Short | postal | physical | both | ||||
Comments | The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource). | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from AddressType (required to http://hl7.org/fhir/ValueSet/address-type|4.0.1 )The type of an address (physical / postal). | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Example | <br/><b>General</b>:both | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
46. Location.address.text | |||||
Definition | Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts. | ||||
Short | Text representation of the address | ||||
Comments | Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | A renderable, unencoded form. | ||||
Example | <br/><b>General</b>:137 Nowhere Street, Erewhon 9132 | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
48. Location.address.line | |||||
Definition | This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information. | ||||
Short | Street name, number, direction & P.O. Box etc. | ||||
Control | 0..* | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Example | <br/><b>General</b>:137 Nowhere Street | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
50. Location.address.city | |||||
Definition | The name of the city, town, suburb, village or other community or delivery center. | ||||
Short | Name of city, town etc. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Alternate Names | Municpality | ||||
Example | <br/><b>General</b>:Erewhon | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
52. Location.address.district | |||||
Definition | The name of the administrative area (county). | ||||
Short | District name (aka county) | ||||
Comments | District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Alternate Names | County | ||||
Example | <br/><b>General</b>:Madison | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
54. Location.address.state | |||||
Definition | Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes). | ||||
Short | Sub-unit of country (abbreviations ok) | ||||
Control | 0..1 | ||||
Binding | Unless not suitable, these codes SHALL be taken from USPS Two Letter Alphabetic Codes (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state )Two letter USPS alphabetic codes. | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Alternate Names | Province, Territory | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
56. Location.address.postalCode | |||||
Definition | A postal code designating a region defined by the postal service. | ||||
Short | US Zip Codes | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Alternate Names | Zip | ||||
Example | <br/><b>General</b>:9132 | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
58. Location.address.country | |||||
Definition | Country - a nation as commonly understood or generally accepted. | ||||
Short | Country (e.g. can be ISO 3166 2 or 3 letter code) | ||||
Comments | ISO 3166 3 letter codes can be used in place of a human readable country name. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
60. Location.address.period | |||||
Definition | Time period when address was/is in use. | ||||
Short | Time period when address was/is in use | ||||
Control | 0..1 | ||||
Type | Period | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Allows addresses to be placed in historical context. | ||||
Example | <br/><b>General</b>:{ "start" : "2010-03-23", "end" : "2010-07-01" } | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
62. Location.physicalType | |||||
Definition | Physical form of the location, e.g. building, room, vehicle, road. | ||||
Short | Physical form of the location | ||||
Control | 0..1 | ||||
Binding | For example codes, see LocationType (example to http://hl7.org/fhir/ValueSet/location-physical-type )Physical form of the location. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | For purposes of showing relevant locations in queries, we need to categorize locations. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
64. Location.position | |||||
Definition | The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML). | ||||
Short | The absolute geographic location | ||||
Control | 0..1 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | For mobile applications and automated route-finding knowing the exact location of the Location is required. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
66. Location.position.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
68. Location.position.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
70. Location.position.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
72. Location.position.longitude | |||||
Definition | Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below). | ||||
Short | Longitude with WGS84 datum | ||||
Control | 1..1 | ||||
Type | decimal | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
74. Location.position.latitude | |||||
Definition | Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below). | ||||
Short | Latitude with WGS84 datum | ||||
Control | 1..1 | ||||
Type | decimal | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
76. Location.position.altitude | |||||
Definition | Altitude. The value domain and the interpretation are the same as for the text of the altitude element in KML (see notes below). | ||||
Short | Altitude with WGS84 datum | ||||
Control | 0..1 | ||||
Type | decimal | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
78. Location.managingOrganization | |||||
Definition | The organization responsible for the provisioning and upkeep of the location. | ||||
Short | Organization responsible for provisioning and upkeep | ||||
Comments | This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource. | ||||
Control | 0..1 | ||||
Type | Reference(US Core Organization Profile) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Need to know who manages the location. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
80. Location.partOf | |||||
Definition | Another Location of which this Location is physically a part of. | ||||
Short | Another Location this one is physically a part of | ||||
Control | 0..1 | ||||
Type | Reference(Location) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | For purposes of location, display and identification, knowing which locations are located within other locations is important. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
82. Location.hoursOfOperation | |||||
Definition | What days/times during a week is this location usually open. | ||||
Short | What days/times during a week is this location usually open | ||||
Comments | This type of information is commonly found published in directories and on websites informing customers when the facility is available. Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
84. Location.hoursOfOperation.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
86. Location.hoursOfOperation.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
88. Location.hoursOfOperation.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
90. Location.hoursOfOperation.daysOfWeek | |||||
Definition | Indicates which days of the week are available between the start and end Times. | ||||
Short | mon | tue | wed | thu | fri | sat | sun | ||||
Control | 0..* | ||||
Binding | The codes SHALL be taken from DaysOfWeek (required to http://hl7.org/fhir/ValueSet/days-of-week|4.0.1 )The days of the week. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
92. Location.hoursOfOperation.allDay | |||||
Definition | The Location is open all day. | ||||
Short | The Location is open all day | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
94. Location.hoursOfOperation.openingTime | |||||
Definition | Time that the Location opens. | ||||
Short | Time that the Location opens | ||||
Control | 0..1 | ||||
Type | time | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
96. Location.hoursOfOperation.closingTime | |||||
Definition | Time that the Location closes. | ||||
Short | Time that the Location closes | ||||
Control | 0..1 | ||||
Type | time | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
98. Location.availabilityExceptions | |||||
Definition | A description of when the locations opening ours are different to normal, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as detailed in the opening hours Times. | ||||
Short | Description of availability exceptions | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
100. Location.endpoint | |||||
Definition | Technical endpoints providing access to services operated for the location. | ||||
Short | Technical endpoints providing access to services operated for the location | ||||
Control | 0..* | ||||
Type | Reference(Endpoint) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |