HL7.ORG.NZ.FHIR.IG.FORMULARY\SupplyInformation - Definitions

HL7 FHIR Implementation Guide - New Zealand Formulary/NZULM IG, published by New Zealand Medicines Formulary LP. This is not an authorized publication; it is the continuous build for version 0.1.0). This version is based on the current content of https://github.com/HL7NZ/nzf/ and changes regularly. See the Directory of published versions

Extension: SupplyInformation - Detailed Descriptions

Draft as of 2022-12-02

Definitions for the nzf-supply-information extension.

Differential Elements Table
Key Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here.

1. Extension
Definition	Information around the supply and availability of medications applied at each NZMT level. For example, when paracetamol tablets are in short supply an alert may be attached to the MP level medication along with the relevant details. Optional Extension Element - found in all resources.
2. Extension.extension
Control	70..*
3. Extension.extension:type
SliceName	type
Definition	The type of issue affecting the product. Possible values: Supply, Information, Brand Change.
Control	1..1
4. Extension.extension:type.extension
Control	0..0
5. Extension.extension:type.url
Control	0..?
Fixed Value	type
6. Extension.extension:type.value[x]
Control	0..?
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
7. Extension.extension:duration
SliceName	duration
Definition	Indication of whether the issue is temporary (such as an out of stock) or permanent (such as a discontinuation). Possible values: Temporary, Permanent.
Control	1..1
8. Extension.extension:duration.extension
Control	0..0
9. Extension.extension:duration.url
Control	0..?
Fixed Value	duration
10. Extension.extension:duration.value[x]
Control	0..?
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
11. Extension.extension:solution
SliceName	solution
Definition	Description of the solution in place to address the issue. Possible values: No replacement, Alternate brand, Alternate formulation, Alternate active ingredients(s), Equivalent product s29, Alternate brand s29, Alternate active ingredient s29, Product recall, Alternate product, No change, Alternate strength, New product.
Control	1..1
12. Extension.extension:solution.extension
Control	0..0
13. Extension.extension:solution.url
Control	0..?
Fixed Value	solution
14. Extension.extension:solution.value[x]
Control	0..?
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
15. Extension.extension:action
SliceName	action
Definition	Description of the action prompted by the issue and solution. Possible values: Prescribing action, Depensing action, Clinical caution, Recall action, Information.
Control	1..1
16. Extension.extension:action.extension
Control	0..0
17. Extension.extension:action.url
Control	0..?
Fixed Value	action
18. Extension.extension:action.value[x]
Control	0..?
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
19. Extension.extension:date
SliceName	date
Definition	The date the issue was entered.
Control	1..1
20. Extension.extension:date.extension
Control	0..0
21. Extension.extension:date.url
Control	0..?
Fixed Value	date
22. Extension.extension:date.value[x]
Control	0..?
Type	date
[x] Note	See Choice of Data Types for further information about how to use [x]
23. Extension.extension:information
SliceName	information
Definition	Product description using NZULM format with short description of the issue and solution.
Control	1..1
24. Extension.extension:information.extension
Control	0..0
25. Extension.extension:information.url
Control	0..?
Fixed Value	information
26. Extension.extension:information.value[x]
Control	0..?
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
27. Extension.extension:url
SliceName	url
Definition	Address of relevant notice on PHARMAC webpage.
Control	1..1
28. Extension.extension:url.extension
Control	0..0
29. Extension.extension:url.url
Control	0..?
Fixed Value	url
30. Extension.extension:url.value[x]
Control	0..?
Type	url
[x] Note	See Choice of Data Types for further information about how to use [x]
31. Extension.url
Fixed Value	http://hl7.org.nz/fhir/StructureDefinition/nzf-supply-information
32. Extension.value[x]
Control	0..01
[x] Note	See Choice of Data Types for further information about how to use [x]

Guidance on how to interpret the contents of this table can be found here.

1. Extension
Definition	Information around the supply and availability of medications applied at each NZMT level. For example, when paracetamol tablets are in short supply an alert may be attached to the MP level medication along with the relevant details. Optional Extension Element - found in all resources.
Control	0..* This element is affected by the following invariants: ele-1
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	70..*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
3. Extension.extension:type
SliceName	type
Definition	The type of issue affecting the product. Possible values: Supply, Information, Brand Change. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	10..1*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
4. Extension.extension:type.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
5. Extension.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	type
6. Extension.extension:type.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	Choice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. Extension.extension:duration
SliceName	duration
Definition	Indication of whether the issue is temporary (such as an out of stock) or permanent (such as a discontinuation). Possible values: Temporary, Permanent. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	10..1*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
8. Extension.extension:duration.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
9. Extension.extension:duration.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	duration
10. Extension.extension:duration.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	Choice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. Extension.extension:solution
SliceName	solution
Definition	Description of the solution in place to address the issue. Possible values: No replacement, Alternate brand, Alternate formulation, Alternate active ingredients(s), Equivalent product s29, Alternate brand s29, Alternate active ingredient s29, Product recall, Alternate product, No change, Alternate strength, New product. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	10..1*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
12. Extension.extension:solution.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
13. Extension.extension:solution.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	solution
14. Extension.extension:solution.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	Choice of: string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. Extension.extension:action
SliceName	action
Definition	Description of the action prompted by the issue and solution. Possible values: Prescribing action, Depensing action, Clinical caution, Recall action, Information. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	10..1*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
16. Extension.extension:action.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
17. Extension.extension:action.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	action
18. Extension.extension:action.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	Choice of: string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. Extension.extension:date
SliceName	date
Definition	The date the issue was entered. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	10..1*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
20. Extension.extension:date.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
21. Extension.extension:date.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	date
22. Extension.extension:date.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	Choice of: date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. Extension.extension:information
SliceName	information
Definition	Product description using NZULM format with short description of the issue and solution. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	10..1*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
24. Extension.extension:information.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
25. Extension.extension:information.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	information
26. Extension.extension:information.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	Choice of: string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. Extension.extension:url
SliceName	url
Definition	Address of relevant notice on PHARMAC webpage. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	10..1*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
28. Extension.extension:url.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
29. Extension.extension:url.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	url
30. Extension.extension:url.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	Choice of: url, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	http://hl7.org.nz/fhir/StructureDefinition/nzf-supply-information
32. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. Extension
Definition	Information around the supply and availability of medications applied at each NZMT level. For example, when paracetamol tablets are in short supply an alert may be attached to the MP level medication along with the relevant details.
Control	0..* This element is affected by the following invariants: ele-1
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
3. Extension.extension
Definition	An Extension
Control	7..*
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:type
SliceName	type
Definition	The type of issue affecting the product. Possible values: Supply, Information, Brand Change.
Control	1..1
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
5. Extension.extension:type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
6. Extension.extension:type.extension
Definition	An Extension
Control	0..0
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
7. Extension.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	type
8. Extension.extension:type.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. Extension.extension:duration
SliceName	duration
Definition	Indication of whether the issue is temporary (such as an out of stock) or permanent (such as a discontinuation). Possible values: Temporary, Permanent.
Control	1..1
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. Extension.extension:duration.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
11. Extension.extension:duration.extension
Definition	An Extension
Control	0..0
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:duration.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	duration
13. Extension.extension:duration.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. Extension.extension:solution
SliceName	solution
Definition	Description of the solution in place to address the issue. Possible values: No replacement, Alternate brand, Alternate formulation, Alternate active ingredients(s), Equivalent product s29, Alternate brand s29, Alternate active ingredient s29, Product recall, Alternate product, No change, Alternate strength, New product.
Control	1..1
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
15. Extension.extension:solution.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
16. Extension.extension:solution.extension
Definition	An Extension
Control	0..0
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
17. Extension.extension:solution.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	solution
18. Extension.extension:solution.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. Extension.extension:action
SliceName	action
Definition	Description of the action prompted by the issue and solution. Possible values: Prescribing action, Depensing action, Clinical caution, Recall action, Information.
Control	1..1
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
20. Extension.extension:action.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
21. Extension.extension:action.extension
Definition	An Extension
Control	0..0
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:action.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	action
23. Extension.extension:action.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. Extension.extension:date
SliceName	date
Definition	The date the issue was entered.
Control	1..1
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
25. Extension.extension:date.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
26. Extension.extension:date.extension
Definition	An Extension
Control	0..0
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
27. Extension.extension:date.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	date
28. Extension.extension:date.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	date
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. Extension.extension:information
SliceName	information
Definition	Product description using NZULM format with short description of the issue and solution.
Control	1..1
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
30. Extension.extension:information.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
31. Extension.extension:information.extension
Definition	An Extension
Control	0..0
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:information.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	information
33. Extension.extension:information.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. Extension.extension:url
SliceName	url
Definition	Address of relevant notice on PHARMAC webpage.
Control	1..1
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
35. Extension.extension:url.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
36. Extension.extension:url.extension
Definition	An Extension
Control	0..0
Type	Extension
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
37. Extension.extension:url.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	url
38. Extension.extension:url.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1
Type	url
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	http://hl7.org.nz/fhir/StructureDefinition/nzf-supply-information
40. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note	See Choice of Data Types for further information about how to use [x]
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))