HL7® FHIR® New Zealand Base Implementation Guide
3.1.0 - Draft

HL7® FHIR® New Zealand Base Implementation Guide, published by HL7 New Zealand. This guide is not an authorized publication; it is the continuous build for version 3.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7NZ/nzbase/ and changes regularly. See the Directory of published versions

Resource Profile: NzPatient - Detailed Descriptions

Active as of 2024-11-18

Definitions for the NzPatient resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Patient
Invariantsnz-pat-1: only a single official NHI (Patient.identifier.where(system='https://standards.digital.health.nz/ns/nhi-id' and use='official').count() < 2)
2. Patient.extension
SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Patient.extension:ethnicity
    Slice Nameethnicity
    Control0..*
    TypeExtension(NZ Ethnicity) (Extension Type: CodeableConcept)
    6. Patient.extension:nzCitizen
    Slice NamenzCitizen
    ShortIs this person a New Zealand citizen
    Control0..1
    TypeExtension(NZ Citizenship) (Complex Extension)
    8. Patient.extension:dhb
    Slice Namedhb
    Control0..1
    TypeExtension(District Health Board linked to a NZ Healthcare Service, Location or Patient) (Extension Type: CodeableConcept)
    10. Patient.extension:domicile-code
    Slice Namedomicile-code
    Control0..1
    TypeExtension(NZ Domicile Code) (Extension Type: CodeableConcept)
    12. Patient.extension:pho
    Slice Namepho
    Control0..1
    TypeExtension(Primary Healthcare Organisation) (Extension Type: CodeableConcept)
    14. Patient.extension:sex-at-birth
    Slice Namesex-at-birth
    Control0..1
    TypeExtension(Sex At Birth) (Extension Type: CodeableConcept)
    16. Patient.extension:iwi
    Slice Nameiwi
    Control0..*
    TypeExtension(Nz_iwi) (Extension Type: CodeableConcept)
    18. Patient.extension:acc-patient-occupation
    Slice Nameacc-patient-occupation
    Control0..1
    TypeExtension(AccPatientOccupation) (Extension Type: CodeableConcept)
    20. Patient.extension:messaging-address
    Slice Namemessaging-address
    Control0..*
    TypeExtension(Messaging Address) (Complex Extension)
    22. Patient.extension:nz-residency
    Slice Namenz-residency
    Control0..1
    TypeExtension(NZResidency) (Complex Extension)
    24. Patient.extension:interpreter-required
    Slice Nameinterpreter-required
    Control0..1
    TypeExtension(Patient Interpreter Required) (Extension Type: boolean)
    26. Patient.identifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ system
    • 28. Patient.identifier:NHI
      Slice NameNHI
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      30. Patient.identifier:NHI.use
      BindingThe codes SHALL be taken from Valid use values for NHI
      (required to https://nzhts.digital.health.nz/fhir/ValueSet/nhi-use-code)
      32. Patient.identifier:NHI.system
      Control1..?
      Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
      34. Patient.name
      36. Patient.name.extension:information-source
      Slice Nameinformation-source
      Control0..1
      TypeExtension(Information Source) (Extension Type: CodeableConcept)
      38. Patient.telecom
      TypeContactPoint(Common NZ ContactPoint datatype)
      40. Patient.gender
      42. Patient.gender.extension
      SlicingThis element introduces a set of slices on Patient.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 44. Patient.gender.extension:genderOriginalText
        Slice NamegenderOriginalText
        Control0..1
        TypeExtension(GenderOriginalText) (Extension Type: string)
        46. Patient.birthDate
        48. Patient.birthDate.extension
        SlicingThis element introduces a set of slices on Patient.birthDate.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 50. Patient.birthDate.extension:information-source
          Slice Nameinformation-source
          Control0..1
          TypeExtension(Information Source) (Extension Type: CodeableConcept)
          52. Patient.deceased[x]
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          SlicingThis element introduces a set of slices on Patient.deceased[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • type @ $this
          • 54. Patient.deceased[x]:deceasedDateTime
            Slice NamedeceasedDateTime
            Control0..1
            TypedateTime
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            56. Patient.deceased[x]:deceasedDateTime.extension
            SlicingThis element introduces a set of slices on Patient.deceased[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 58. Patient.deceased[x]:deceasedDateTime.extension:information-source
              Slice Nameinformation-source
              Control0..1
              TypeExtension(Information Source) (Extension Type: CodeableConcept)
              60. Patient.address
              TypeAddress(Common NZ Address datatype)

              Guidance on how to interpret the contents of this table can be found here

              0. Patient
              Definition

              Demographics and other administrative information about an individual or animal receiving care or other health-related services.

              ShortInformation about an individual or animal receiving health care services
              Control0..*
              Is Modifierfalse
              Summaryfalse
              Alternate NamesSubjectOfCare Client Resident
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              nz-pat-1: only a single official NHI (Patient.identifier.where(system='https://standards.digital.health.nz/ns/nhi-id' and use='official').count() < 2)
              2. Patient.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              4. Patient.extension
              Definition

              An Extension


              May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortExtensionAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 6. Patient.extension:ethnicity
                Slice Nameethnicity
                Definition

                The ethnic group or groups that a person identifies with or feels they belong to. Ethnicity is a measure of cultural affiliation as opposed to race, ancestry, nationality or citizen. Ethnicity is self-perceived and a person can belong to more than one group.

                The Stats New Zealand standard can be found here.

                ShortNZ Ethnicity
                Control0..*
                This element is affected by the following invariants: ele-1
                TypeExtension(NZ Ethnicity) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                8. Patient.extension:nzCitizen
                Slice NamenzCitizen
                Definition

                New Zealand citizenship

                ShortIs this person a New Zealand citizen
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(NZ Citizenship) (Complex Extension)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                10. Patient.extension:dhb
                Slice Namedhb
                Definition

                District Health Board relating to a NZ Healthcare Service, Location (Facility) or Patient (primary, physical home address).

                ShortDistrict Health Board linked to a NZ Healthcare Service, Location or Patient
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(District Health Board linked to a NZ Healthcare Service, Location or Patient) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                12. Patient.extension:domicile-code
                Slice Namedomicile-code
                Definition

                NZ Domicile Code. Derived from a patient's primary physical, home address.

                ShortNZ Domicile Code
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(NZ Domicile Code) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                14. Patient.extension:pho
                Slice Namepho
                Definition

                Primary Healthcare Organisation associated with a General Practice linked to a NZ Healthcare Service, Location (Facility) or Patient (GP).

                ShortPrimary Healthcare Organisation
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(Primary Healthcare Organisation) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                16. Patient.extension:sex-at-birth
                Slice Namesex-at-birth
                Definition

                A person’s sex at the time of their birth (considered to be immutable).

                ShortSex At Birth
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(Sex At Birth) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                18. Patient.extension:iwi
                Slice Nameiwi
                Definition

                Persons Iwi affiliation

                ShortExtension
                Control0..*
                This element is affected by the following invariants: ele-1
                TypeExtension(Nz_iwi) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                20. Patient.extension:acc-patient-occupation
                Slice Nameacc-patient-occupation
                Definition

                Codes to describe a patient's occupation, using ACC's patient occupation codeset.

                Note that the current ValueSet binding contains codes from NZSC099. ACC are planning to update this ValueSet to base the codes on ANZSCO at the request of Stats NZ (Timing TBC), so the binding strength has been left as 'example'.

                ShortExtension
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(AccPatientOccupation) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                22. Patient.extension:messaging-address
                Slice Namemessaging-address
                Definition

                The address to where electronic communications might be sent. For historical reasons, there is an overlap with edi-address.

                ShortMessaging Address
                Control0..*
                This element is affected by the following invariants: ele-1
                TypeExtension(Messaging Address) (Complex Extension)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                24. Patient.extension:nz-residency
                Slice Namenz-residency
                Definition

                NZ Residency status

                ShortExtension
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(NZResidency) (Complex Extension)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                26. Patient.extension:interpreter-required
                Slice Nameinterpreter-required
                Definition

                This Patient requires an interpreter to communicate healthcare information to the practitioner.

                ShortWhether the patient needs an interpreter
                Comments

                The Patient does not speak the default language of the organization, and hence requires an interpreter. If the patient has other languages in the Communications list, then that would be the type of interpreter required.

                Control0..1
                TypeExtension(Patient Interpreter Required) (Extension Type: boolean)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                28. Patient.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                Summaryfalse
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                30. Patient.identifier
                Definition

                An identifier for this patient.

                ShortAn identifier for this patient
                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control0..*
                TypeIdentifier
                Is Modifierfalse
                Summarytrue
                Requirements

                Patients are almost always assigned specific numerical identifiers.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ system
                • 32. Patient.identifier:NHI
                  Slice NameNHI
                  Definition

                  An identifier for this patient.

                  ShortAn identifier for this patient
                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..*
                  TypeIdentifier
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Patients are almost always assigned specific numerical identifiers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  34. Patient.identifier:NHI.use
                  Definition

                  The purpose of this identifier.

                  Shortusual | official | temp | secondary | old (If known)
                  Comments

                  Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                  Control0..1
                  BindingThe codes SHALL be taken from Valid use values for NHIhttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
                  (required to https://nzhts.digital.health.nz/fhir/ValueSet/nhi-use-code)
                  Typecode
                  Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  36. Patient.identifier:NHI.system
                  Definition

                  Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                  ShortThe namespace for the identifier value
                  Comments

                  Identifier.system is always case sensitive.

                  Control10..1
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                  Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
                  Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  38. Patient.active
                  Definition

                  Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

                  It is often used to filter patient lists to exclude inactive patients

                  Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

                  ShortWhether this patient's record is in active use
                  Comments

                  If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

                  Control0..1
                  Typeboolean
                  Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  Need to be able to mark a patient record as not to be used because it was created in error.

                  Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  40. Patient.telecom
                  Definition

                  Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.


                  A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

                  ShortDetails of a Technology mediated contact point (phone, fax, email, etc.)A contact detail for the individual
                  Comments

                  A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

                  Control0..*
                  This element is affected by the following invariants: ele-1
                  TypeContactPoint(Common NZ ContactPoint datatype)
                  Is Modifierfalse
                  Requirements

                  People have (primary) ways to contact them in some way such as phone, email.

                  Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
                  ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  42. Patient.deceased[x]
                  Definition

                  Indicates if the individual is deceased or not.

                  ShortIndicates if the individual is deceased or not
                  Comments

                  If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                  Control0..1
                  TypeChoice of: boolean, dateTime
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Patient.deceased[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • type @ $this
                  • 44. Patient.deceased[x]:deceasedDateTime
                    Slice NamedeceasedDateTime
                    Definition

                    Indicates if the individual is deceased or not.

                    ShortIndicates if the individual is deceased or not
                    Comments

                    If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                    Control0..1
                    TypedateTime, boolean
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    46. Patient.deceased[x]:deceasedDateTime.extension
                    Definition

                    An Extension


                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortExtensionAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Patient.deceased[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 48. Patient.deceased[x]:deceasedDateTime.extension:information-source
                      Slice Nameinformation-source
                      Definition

                      The official source of information held about a patient.

                      ShortInformation Source
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      TypeExtension(Information Source) (Extension Type: CodeableConcept)
                      Is Modifierfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      50. Patient.address
                      Definition

                      An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.


                      An address for the individual.

                      ShortAn address expressed using postal conventions (as opposed to GPS or other location definition formats)An address for the individual
                      Comments

                      Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).


                      Patient may have multiple addresses with different uses or applicable periods.

                      Control0..*
                      This element is affected by the following invariants: ele-1
                      TypeAddress(Common NZ Address datatype)
                      Is Modifierfalse
                      Requirements

                      May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      52. Patient.link
                      Definition

                      Link to another patient resource that concerns the same actual patient.

                      ShortLink to another patient resource that concerns the same actual person
                      Comments

                      There is no assumption that linked patient records have mutual links.

                      Control0..*
                      TypeBackboneElement
                      Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
                      Summarytrue
                      Requirements

                      There are multiple use cases:

                      • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
                      • Distribution of patient information across multiple servers.
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      54. Patient.link.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      56. Patient.link.other
                      Definition

                      The other patient resource that the link refers to.

                      ShortThe other patient or related person resource that the link refers to
                      Comments

                      Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

                      Control1..1
                      TypeReference(Patient, RelatedPerson)
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      58. Patient.link.type
                      Definition

                      The type of link between this patient resource and another patient resource.

                      Shortreplaced-by | replaces | refer | seealso
                      Control1..1
                      BindingThe codes SHALL be taken from LinkTypehttp://hl7.org/fhir/ValueSet/link-type|4.0.1
                      (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

                      The type of link between this patient resource and another patient resource.

                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                      Guidance on how to interpret the contents of this table can be found here

                      0. Patient
                      Definition

                      Demographics and other administrative information about an individual or animal receiving care or other health-related services.

                      ShortInformation about an individual or animal receiving health care services
                      Control0..*
                      Is Modifierfalse
                      Summaryfalse
                      Alternate NamesSubjectOfCare Client Resident
                      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                      dom-6: A resource should have narrative for robust management (text.`div`.exists())
                      nz-pat-1: only a single official NHI (Patient.identifier.where(system='https://standards.digital.health.nz/ns/nhi-id' and use='official').count() < 2)
                      2. Patient.id
                      Definition

                      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                      ShortLogical id of this artifact
                      Comments

                      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                      Control0..1
                      Typeid
                      Is Modifierfalse
                      Summarytrue
                      4. Patient.meta
                      Definition

                      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                      ShortMetadata about the resource
                      Control0..1
                      TypeMeta
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      6. Patient.implicitRules
                      Definition

                      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                      ShortA set of rules under which this content was created
                      Comments

                      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                      Control0..1
                      Typeuri
                      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      8. Patient.language
                      Definition

                      The base language in which the resource is written.

                      ShortLanguage of the resource content
                      Comments

                      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                      Control0..1
                      BindingThe codes SHOULD be taken from CommonLanguages
                      (preferred to http://hl7.org/fhir/ValueSet/languages)

                      A human language.

                      Additional BindingsPurpose
                      AllLanguagesMax Binding
                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      10. Patient.text
                      Definition

                      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                      ShortText summary of the resource, for human interpretation
                      Comments

                      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                      Control0..1
                      TypeNarrative
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesnarrative, html, xhtml, display
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      12. Patient.contained
                      Definition

                      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                      ShortContained, inline Resources
                      Comments

                      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                      Control0..*
                      TypeResource
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesinline resources, anonymous resources, contained resources
                      14. Patient.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 16. Patient.extension:ethnicity
                        Slice Nameethnicity
                        Definition

                        The ethnic group or groups that a person identifies with or feels they belong to. Ethnicity is a measure of cultural affiliation as opposed to race, ancestry, nationality or citizen. Ethnicity is self-perceived and a person can belong to more than one group.

                        The Stats New Zealand standard can be found here.

                        ShortNZ Ethnicity
                        Control0..*
                        This element is affected by the following invariants: ele-1
                        TypeExtension(NZ Ethnicity) (Extension Type: CodeableConcept)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        18. Patient.extension:nzCitizen
                        Slice NamenzCitizen
                        Definition

                        New Zealand citizenship

                        ShortIs this person a New Zealand citizen
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        TypeExtension(NZ Citizenship) (Complex Extension)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        20. Patient.extension:dhb
                        Slice Namedhb
                        Definition

                        District Health Board relating to a NZ Healthcare Service, Location (Facility) or Patient (primary, physical home address).

                        ShortDistrict Health Board linked to a NZ Healthcare Service, Location or Patient
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        TypeExtension(District Health Board linked to a NZ Healthcare Service, Location or Patient) (Extension Type: CodeableConcept)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        22. Patient.extension:domicile-code
                        Slice Namedomicile-code
                        Definition

                        NZ Domicile Code. Derived from a patient's primary physical, home address.

                        ShortNZ Domicile Code
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        TypeExtension(NZ Domicile Code) (Extension Type: CodeableConcept)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        24. Patient.extension:pho
                        Slice Namepho
                        Definition

                        Primary Healthcare Organisation associated with a General Practice linked to a NZ Healthcare Service, Location (Facility) or Patient (GP).

                        ShortPrimary Healthcare Organisation
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        TypeExtension(Primary Healthcare Organisation) (Extension Type: CodeableConcept)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        26. Patient.extension:sex-at-birth
                        Slice Namesex-at-birth
                        Definition

                        A person’s sex at the time of their birth (considered to be immutable).

                        ShortSex At Birth
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        TypeExtension(Sex At Birth) (Extension Type: CodeableConcept)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        28. Patient.extension:iwi
                        Slice Nameiwi
                        Definition

                        Persons Iwi affiliation

                        ShortExtension
                        Control0..*
                        This element is affected by the following invariants: ele-1
                        TypeExtension(Nz_iwi) (Extension Type: CodeableConcept)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        30. Patient.extension:acc-patient-occupation
                        Slice Nameacc-patient-occupation
                        Definition

                        Codes to describe a patient's occupation, using ACC's patient occupation codeset.

                        Note that the current ValueSet binding contains codes from NZSC099. ACC are planning to update this ValueSet to base the codes on ANZSCO at the request of Stats NZ (Timing TBC), so the binding strength has been left as 'example'.

                        ShortExtension
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        TypeExtension(AccPatientOccupation) (Extension Type: CodeableConcept)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        32. Patient.extension:messaging-address
                        Slice Namemessaging-address
                        Definition

                        The address to where electronic communications might be sent. For historical reasons, there is an overlap with edi-address.

                        ShortMessaging Address
                        Control0..*
                        This element is affected by the following invariants: ele-1
                        TypeExtension(Messaging Address) (Complex Extension)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        34. Patient.extension:nz-residency
                        Slice Namenz-residency
                        Definition

                        NZ Residency status

                        ShortExtension
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        TypeExtension(NZResidency) (Complex Extension)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        36. Patient.extension:interpreter-required
                        Slice Nameinterpreter-required
                        Definition

                        This Patient requires an interpreter to communicate healthcare information to the practitioner.

                        ShortWhether the patient needs an interpreter
                        Comments

                        The Patient does not speak the default language of the organization, and hence requires an interpreter. If the patient has other languages in the Communications list, then that would be the type of interpreter required.

                        Control0..1
                        TypeExtension(Patient Interpreter Required) (Extension Type: boolean)
                        Is Modifierfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        38. Patient.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                        Summaryfalse
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        40. Patient.identifier
                        Definition

                        An identifier for this patient.

                        ShortAn identifier for this patient
                        NoteThis is a business identifier, not a resource identifier (see discussion)
                        Control0..*
                        TypeIdentifier
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Patients are almost always assigned specific numerical identifiers.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ system
                        • 42. Patient.identifier:NHI
                          Slice NameNHI
                          Definition

                          An identifier for this patient.

                          ShortAn identifier for this patient
                          NoteThis is a business identifier, not a resource identifier (see discussion)
                          Control0..*
                          TypeIdentifier
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Patients are almost always assigned specific numerical identifiers.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          44. Patient.identifier:NHI.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          46. Patient.identifier:NHI.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 48. Patient.identifier:NHI.use
                            Definition

                            The purpose of this identifier.

                            Shortusual | official | temp | secondary | old (If known)
                            Comments

                            Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                            Control0..1
                            BindingThe codes SHALL be taken from Valid use values for NHI
                            (required to https://nzhts.digital.health.nz/fhir/ValueSet/nhi-use-code)
                            Typecode
                            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            50. Patient.identifier:NHI.type
                            Definition

                            A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                            ShortDescription of identifier
                            Comments

                            This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                            Control0..1
                            BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                            (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                            A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            Allows users to make use of identifiers when the identifier system is not known.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            52. Patient.identifier:NHI.system
                            Definition

                            Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                            ShortThe namespace for the identifier value
                            Comments

                            Identifier.system is always case sensitive.

                            Control1..1
                            Typeuri
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                            Fixed Valuehttps://standards.digital.health.nz/ns/nhi-id
                            Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            54. Patient.identifier:NHI.value
                            Definition

                            The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                            ShortThe value that is unique
                            Comments

                            If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Example<br/><b>General</b>:123456
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            56. Patient.identifier:NHI.period
                            Definition

                            Time period during which identifier is/was valid for use.

                            ShortTime period when id is/was valid for use
                            Control0..1
                            TypePeriod
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            58. Patient.identifier:NHI.assigner
                            Definition

                            Organization that issued/manages the identifier.

                            ShortOrganization that issued id (may be just text)
                            Comments

                            The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                            Control0..1
                            TypeReference(Organization)
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            60. Patient.active
                            Definition

                            Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

                            It is often used to filter patient lists to exclude inactive patients

                            Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

                            ShortWhether this patient's record is in active use
                            Comments

                            If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

                            Control0..1
                            Typeboolean
                            Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            Need to be able to mark a patient record as not to be used because it was created in error.

                            Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            62. Patient.name
                            Definition

                            A name associated with the individual.

                            ShortA name associated with the patient
                            Comments

                            A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

                            Control0..*
                            TypeHumanName
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            64. Patient.name.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            66. Patient.name.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Patient.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 68. Patient.name.extension:information-source
                              Slice Nameinformation-source
                              Definition

                              The official source of information held about a patient.

                              ShortInformation Source
                              Control0..1
                              TypeExtension(Information Source) (Extension Type: CodeableConcept)
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              70. Patient.name.use
                              Definition

                              Identifies the purpose for this name.

                              Shortusual | official | temp | nickname | anonymous | old | maiden
                              Comments

                              Applications can assume that a name is current unless it explicitly says that it is temporary or old.

                              Control0..1
                              BindingThe codes SHALL be taken from NameUse
                              (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

                              The use of a human name.

                              Typecode
                              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Allows the appropriate name for a particular context of use to be selected from among a set of names.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              72. Patient.name.text
                              Definition

                              Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

                              ShortText representation of the full name
                              Comments

                              Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              A renderable, unencoded form.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              74. Patient.name.family
                              Definition

                              The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

                              ShortFamily name (often called 'Surname')
                              Comments

                              Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Alternate Namessurname
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              76. Patient.name.given
                              Definition

                              Given name.

                              ShortGiven names (not always 'first'). Includes middle names
                              Comments

                              If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

                              Control0..*
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Alternate Namesfirst name, middle name
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              78. Patient.name.prefix
                              Definition

                              Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

                              ShortParts that come before the name
                              Control0..*
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              80. Patient.name.suffix
                              Definition

                              Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

                              ShortParts that come after the name
                              Control0..*
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              82. Patient.name.period
                              Definition

                              Indicates the period of time when this name was valid for the named person.

                              ShortTime period when name was/is in use
                              Control0..1
                              TypePeriod
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Allows names to be placed in historical context.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              84. Patient.telecom
                              Definition

                              Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

                              ShortDetails of a Technology mediated contact point (phone, fax, email, etc.)
                              Comments

                              A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

                              Control0..*
                              This element is affected by the following invariants: ele-1
                              TypeContactPoint(Common NZ ContactPoint datatype)
                              Is Modifierfalse
                              Requirements

                              People have (primary) ways to contact them in some way such as phone, email.

                              Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
                              ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              86. Patient.gender
                              Definition

                              Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

                              Shortmale | female | other | unknown
                              Comments

                              The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

                              Control0..1
                              BindingThe codes SHALL be taken from AdministrativeGender
                              (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                              The gender of a person used for administrative purposes.

                              Typecode
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Needed for identification of the individual, in combination with (at least) name and birth date.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              88. Patient.gender.id
                              Definition

                              unique id for the element within a resource (for internal references)

                              Shortxml:id (or equivalent in JSON)
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              90. Patient.gender.extension
                              Definition

                              An Extension

                              ShortExtension
                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Patient.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 92. Patient.gender.extension:genderOriginalText
                                Slice NamegenderOriginalText
                                Definition

                                Text provided by the person with the choice of 'Another gender' (The FHIR AdministrativeGender CodeSystem codes this as 'other').

                                ShortExtension
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                TypeExtension(GenderOriginalText) (Extension Type: string)
                                Is Modifierfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                94. Patient.gender.value
                                Definition

                                Primitive value for code

                                ShortPrimitive value for code
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                96. Patient.birthDate
                                Definition

                                The date of birth for the individual.

                                ShortThe date of birth for the individual
                                Comments

                                At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

                                Control0..1
                                Typedate
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Age of the individual drives many clinical processes.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                LOINC Code21112-8
                                98. Patient.birthDate.id
                                Definition

                                unique id for the element within a resource (for internal references)

                                Shortxml:id (or equivalent in JSON)
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                100. Patient.birthDate.extension
                                Definition

                                An Extension

                                ShortExtension
                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Patient.birthDate.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 102. Patient.birthDate.extension:information-source
                                  Slice Nameinformation-source
                                  Definition

                                  The official source of information held about a patient.

                                  ShortInformation Source
                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  TypeExtension(Information Source) (Extension Type: CodeableConcept)
                                  Is Modifierfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  104. Patient.birthDate.value
                                  Definition

                                  The actual value

                                  ShortPrimitive value for date
                                  Control0..1
                                  Typedate
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  106. Patient.deceased[x]
                                  Definition

                                  Indicates if the individual is deceased or not.

                                  ShortIndicates if the individual is deceased or not
                                  Comments

                                  If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                                  Control0..1
                                  TypeChoice of: boolean, dateTime
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  SlicingThis element introduces a set of slices on Patient.deceased[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • type @ $this
                                  • 108. Patient.deceased[x]:deceasedDateTime
                                    Slice NamedeceasedDateTime
                                    Definition

                                    Indicates if the individual is deceased or not.

                                    ShortIndicates if the individual is deceased or not
                                    Comments

                                    If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                                    Control0..1
                                    TypedateTime
                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                    Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    110. Patient.deceased[x]:deceasedDateTime.id
                                    Definition

                                    unique id for the element within a resource (for internal references)

                                    Shortxml:id (or equivalent in JSON)
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    112. Patient.deceased[x]:deceasedDateTime.extension
                                    Definition

                                    An Extension

                                    ShortExtension
                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    SlicingThis element introduces a set of slices on Patient.deceased[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                    • value @ url
                                    • 114. Patient.deceased[x]:deceasedDateTime.extension:information-source
                                      Slice Nameinformation-source
                                      Definition

                                      The official source of information held about a patient.

                                      ShortInformation Source
                                      Control0..1
                                      This element is affected by the following invariants: ele-1
                                      TypeExtension(Information Source) (Extension Type: CodeableConcept)
                                      Is Modifierfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      116. Patient.deceased[x]:deceasedDateTime.value
                                      Definition

                                      The actual value

                                      ShortPrimitive value for dateTime
                                      Control0..1
                                      TypedateTime
                                      Is Modifierfalse
                                      XML FormatIn the XML format, this property is represented as an attribute.
                                      Summaryfalse
                                      118. Patient.address
                                      Definition

                                      An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.

                                      ShortAn address expressed using postal conventions (as opposed to GPS or other location definition formats)
                                      Comments

                                      Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

                                      Control0..*
                                      This element is affected by the following invariants: ele-1
                                      TypeAddress(Common NZ Address datatype)
                                      Is Modifierfalse
                                      Requirements

                                      May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      120. Patient.maritalStatus
                                      Definition

                                      This field contains a patient's most recent marital (civil) status.

                                      ShortMarital (civil) status of a patient
                                      Control0..1
                                      BindingUnless not suitable, these codes SHALL be taken from Marital Status Codes
                                      (extensible to http://hl7.org/fhir/ValueSet/marital-status)

                                      The domestic partnership status of a person.

                                      TypeCodeableConcept
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      Most, if not all systems capture it.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      122. Patient.multipleBirth[x]
                                      Definition

                                      Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

                                      ShortWhether patient is part of a multiple birth
                                      Comments

                                      Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

                                      Control0..1
                                      TypeChoice of: boolean, integer
                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summaryfalse
                                      Requirements

                                      For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      124. Patient.photo
                                      Definition

                                      Image of the patient.

                                      ShortImage of the patient
                                      Comments

                                      Guidelines:

                                      • Use id photos, not clinical photos.
                                      • Limit dimensions to thumbnail.
                                      • Keep byte count low to ease resource updates.
                                      Control0..*
                                      TypeAttachment
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      126. Patient.contact
                                      Definition

                                      A contact party (e.g. guardian, partner, friend) for the patient.

                                      ShortA contact party (e.g. guardian, partner, friend) for the patient
                                      Comments

                                      Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

                                      Control0..*
                                      TypeBackboneElement
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      Need to track people you can contact about the patient.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
                                      128. Patient.contact.id
                                      Definition

                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                      ShortUnique id for inter-element referencing
                                      Control0..1
                                      Typestring
                                      Is Modifierfalse
                                      XML FormatIn the XML format, this property is represented as an attribute.
                                      Summaryfalse
                                      130. Patient.contact.extension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                      ShortAdditional content defined by implementations
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifierfalse
                                      Summaryfalse
                                      Alternate Namesextensions, user content
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      132. Patient.contact.modifierExtension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                      ShortExtensions that cannot be ignored even if unrecognized
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                      Summarytrue
                                      Requirements

                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                      Alternate Namesextensions, user content, modifiers
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      134. Patient.contact.relationship
                                      Definition

                                      The nature of the relationship between the patient and the contact person.

                                      ShortThe kind of relationship
                                      Control0..*
                                      BindingUnless not suitable, these codes SHALL be taken from PatientContactRelationship
                                      (extensible to http://hl7.org/fhir/ValueSet/patient-contactrelationship)

                                      The nature of the relationship between a patient and a contact person for that patient.

                                      TypeCodeableConcept
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      Used to determine which contact person is the most relevant to approach, depending on circumstances.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      136. Patient.contact.name
                                      Definition

                                      A name associated with the contact person.

                                      ShortA name associated with the contact person
                                      Control0..1
                                      TypeHumanName
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      138. Patient.contact.telecom
                                      Definition

                                      A contact detail for the person, e.g. a telephone number or an email address.

                                      ShortA contact detail for the person
                                      Comments

                                      Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

                                      Control0..*
                                      TypeContactPoint
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      People have (primary) ways to contact them in some way such as phone, email.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      140. Patient.contact.address
                                      Definition

                                      Address for the contact person.

                                      ShortAddress for the contact person
                                      Control0..1
                                      TypeAddress
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      Need to keep track where the contact person can be contacted per postal mail or visited.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      142. Patient.contact.gender
                                      Definition

                                      Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

                                      Shortmale | female | other | unknown
                                      Control0..1
                                      BindingThe codes SHALL be taken from AdministrativeGender
                                      (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                                      The gender of a person used for administrative purposes.

                                      Typecode
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summaryfalse
                                      Requirements

                                      Needed to address the person correctly.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      144. Patient.contact.organization
                                      Definition

                                      Organization on behalf of which the contact is acting or for which the contact is working.

                                      ShortOrganization that is associated with the contact
                                      Control0..1
                                      This element is affected by the following invariants: pat-1
                                      TypeReference(Organization)
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      For guardians or business related contacts, the organization is relevant.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      146. Patient.contact.period
                                      Definition

                                      The period during which this contact person or organization is valid to be contacted relating to this patient.

                                      ShortThe period during which this contact person or organization is valid to be contacted relating to this patient
                                      Control0..1
                                      TypePeriod
                                      Is Modifierfalse
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      148. Patient.communication
                                      Definition

                                      A language which may be used to communicate with the patient about his or her health.

                                      ShortA language which may be used to communicate with the patient about his or her health
                                      Comments

                                      If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

                                      Control0..*
                                      TypeBackboneElement
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      150. Patient.communication.id
                                      Definition

                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                      ShortUnique id for inter-element referencing
                                      Control0..1
                                      Typestring
                                      Is Modifierfalse
                                      XML FormatIn the XML format, this property is represented as an attribute.
                                      Summaryfalse
                                      152. Patient.communication.extension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                      ShortAdditional content defined by implementations
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifierfalse
                                      Summaryfalse
                                      Alternate Namesextensions, user content
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      154. Patient.communication.modifierExtension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                      ShortExtensions that cannot be ignored even if unrecognized
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                      Summarytrue
                                      Requirements

                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                      Alternate Namesextensions, user content, modifiers
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      156. Patient.communication.language
                                      Definition

                                      The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

                                      ShortThe language which can be used to communicate with the patient about his or her health
                                      Comments

                                      The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

                                      Control1..1
                                      BindingThe codes SHOULD be taken from CommonLanguages
                                      (preferred to http://hl7.org/fhir/ValueSet/languages)

                                      A human language.

                                      Additional BindingsPurpose
                                      AllLanguagesMax Binding
                                      TypeCodeableConcept
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      158. Patient.communication.preferred
                                      Definition

                                      Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

                                      ShortLanguage preference indicator
                                      Comments

                                      This language is specifically identified for communicating healthcare information.

                                      Control0..1
                                      Typeboolean
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summaryfalse
                                      Requirements

                                      People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      160. Patient.generalPractitioner
                                      Definition

                                      Patient's nominated care provider.

                                      ShortPatient's nominated primary care provider
                                      Comments

                                      This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

                                      Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

                                      Control0..*
                                      TypeReference(Organization, Practitioner, PractitionerRole)
                                      Is Modifierfalse
                                      Summaryfalse
                                      Alternate NamescareProvider
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      162. Patient.managingOrganization
                                      Definition

                                      Organization that is the custodian of the patient record.

                                      ShortOrganization that is the custodian of the patient record
                                      Comments

                                      There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

                                      Control0..1
                                      TypeReference(Organization)
                                      Is Modifierfalse
                                      Summarytrue
                                      Requirements

                                      Need to know who recognizes this patient record, manages and updates it.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      164. Patient.link
                                      Definition

                                      Link to another patient resource that concerns the same actual patient.

                                      ShortLink to another patient resource that concerns the same actual person
                                      Comments

                                      There is no assumption that linked patient records have mutual links.

                                      Control0..*
                                      TypeBackboneElement
                                      Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
                                      Summarytrue
                                      Requirements

                                      There are multiple use cases:

                                      • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
                                      • Distribution of patient information across multiple servers.
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      166. Patient.link.id
                                      Definition

                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                      ShortUnique id for inter-element referencing
                                      Control0..1
                                      Typestring
                                      Is Modifierfalse
                                      XML FormatIn the XML format, this property is represented as an attribute.
                                      Summaryfalse
                                      168. Patient.link.extension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                      ShortAdditional content defined by implementations
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifierfalse
                                      Summaryfalse
                                      Alternate Namesextensions, user content
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      170. Patient.link.modifierExtension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                      ShortExtensions that cannot be ignored even if unrecognized
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                      Summarytrue
                                      Requirements

                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                      Alternate Namesextensions, user content, modifiers
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      172. Patient.link.other
                                      Definition

                                      The other patient resource that the link refers to.

                                      ShortThe other patient or related person resource that the link refers to
                                      Comments

                                      Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

                                      Control1..1
                                      TypeReference(Patient, RelatedPerson)
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      174. Patient.link.type
                                      Definition

                                      The type of link between this patient resource and another patient resource.

                                      Shortreplaced-by | replaces | refer | seealso
                                      Control1..1
                                      BindingThe codes SHALL be taken from LinkType
                                      (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

                                      The type of link between this patient resource and another patient resource.

                                      Typecode
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))