Da Vinci Risk Adjustment Implementation Guide
2.0.0 - STU2
Da Vinci Risk Adjustment Implementation Guide
2.0.0 - STU2
Da Vinci Risk Adjustment Implementation Guide, published by HL7 International / Clinical Quality Information. This guide is not an authorized publication; it is the continuous build for version 2.0.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/davinci-ra/ and changes regularly. See the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 1 |
Definitions for the ra-parameters-cc-remark-patch resource profile.
Guidance on how to interpret the contents of this table can be found here
| 0. Parameters | |
| Must Support | false |
| 2. Parameters.parameter | |
| Slicing | This element introduces a set of slices on Parameters.parameter. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Parameters.parameter:operation | |
| Slice Name | operation |
| Definition | This parameter for patch operation |
| Short | Patch operation |
| Comments | comment. |
| Control | 0..* |
| 6. Parameters.parameter:operation.name | |
| Fixed Value | operation |
| 8. Parameters.parameter:operation.part | |
| Slicing | This element introduces a set of slices on Parameters.parameter.part. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 10. Parameters.parameter:operation.part:type | |
| Slice Name | type |
| Definition | this Patch operation is to add a ccRemark |
| Short | parameter part: type is add |
| Control | 1..1 |
| 12. Parameters.parameter:operation.part:type.name | |
| Fixed Value | type |
| 14. Parameters.parameter:operation.part:type.valueCode | |
| Control | 1..1 |
| Type | code |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Fixed Value | add |
| 16. Parameters.parameter:operation.part:path | |
| Slice Name | path |
| Definition | The FHIR path for adding ccRemark to Risk Adjustment Coding Gap Report. ccRemark is added to the MeasureReport.group, the path should be a value starting with 'MeasureReport.group.where(id=', with the group id that the ccRemark is added to. |
| Short | parameter part: FHIR path |
| Control | 1..1 |
| 18. Parameters.parameter:operation.part:path.name | |
| Fixed Value | path |
| 20. Parameters.parameter:operation.part:path.valueString | |
| Control | 1..1 |
| Type | string |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ra-3: Path must start with 'MeasureReport.group.where(id='. (value.startsWith('MeasureReport.group.where(id=')) |
| 22. Parameters.parameter:operation.part:name | |
| Slice Name | name |
| Definition | extension |
| Short | parameter part: name |
| Control | 1..1 |
| 24. Parameters.parameter:operation.part:name.name | |
| Fixed Value | name |
| 26. Parameters.parameter:operation.part:name.valueString | |
| Control | 1..1 |
| Type | string |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Fixed Value | extension |
| 28. Parameters.parameter:operation.part:value | |
| Slice Name | value |
| Definition | The ccRemark data that needs to be patched |
| Short | parameter part: value |
| Control | 1..1 |
| 30. Parameters.parameter:operation.part:value.name | |
| Fixed Value | value |
| 32. Parameters.parameter:operation.part:value.part | |
| Control | 1..* |
| Slicing | This element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 34. Parameters.parameter:operation.part:value.part:url | |
| Slice Name | url |
| Definition | Url for the Risk Adjustment ccRemark extension |
| Short | url of the ccRemark extension |
| Control | 1..1 |
| 36. Parameters.parameter:operation.part:value.part:url.name | |
| Fixed Value | url |
| 38. Parameters.parameter:operation.part:value.part:url.value[x] | |
| Control | 1..1 |
| Type | uri |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Fixed Value | http://hl7.org/fhir/us/davinci-ra/StructureDefinition/ra-ccRemark |
| 40. Parameters.parameter:operation.part:value.part:extension | |
| Slice Name | extension |
| Definition | Content of Risk Adjustment ccRemark complex extension to be added by the Patch operation. |
| Short | ccRemark content to be added |
| Control | 1..1 |
| 42. Parameters.parameter:operation.part:value.part:extension.name | |
| Fixed Value | extension |
| 44. Parameters.parameter:operation.part:value.part:extension.part | |
| Control | 1..* |
Guidance on how to interpret the contents of this table can be found here
| 0. Parameters | |
| Definition | This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it. |
| Short | Operation Request or Response |
| Comments | The parameters that may be used are defined by the OperationDefinition resource. |
| Control | 0..* |
| Is Modifier | false |
| Must Support | false |
| Summary | false |
| 2. Parameters.implicitRules | |
| Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
| Short | A set of rules under which this content was created |
| Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
| Control | 0..1 |
| Type | uri |
| Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 4. Parameters.parameter | |
| Definition | A parameter passed to or received from the operation. |
| Short | Operation Parameter |
| Control | 0..* |
| Type | BackboneElement |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))) |
| Slicing | This element introduces a set of slices on Parameters.parameter. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Parameters.parameter.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored even if unrecognized |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
| Summary | true |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content, modifiers |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 8. Parameters.parameter.name | |
| Definition | The name of the parameter (reference to the operation definition). |
| Short | Name from the definition |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Parameters.parameter:operation | |
| Slice Name | operation |
| Definition | This parameter for patch operation A parameter passed to or received from the operation. |
| Short | Patch operationOperation Parameter |
| Comments | comment. |
| Control | 0..* |
| Type | BackboneElement |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))) |
| 12. Parameters.parameter:operation.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored even if unrecognized |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
| Summary | true |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content, modifiers |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 14. Parameters.parameter:operation.name | |
| Definition | The name of the parameter (reference to the operation definition). |
| Short | Name from the definition |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Fixed Value | operation |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Parameters.parameter:operation.part | |
| Definition | A named part of a multi-part parameter. |
| Short | Named part of a multi-part parameter |
| Comments | Only one level of nested parameters is allowed. |
| Control | 0..* |
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Parameters.parameter.part. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 18. Parameters.parameter:operation.part:type | |
| Slice Name | type |
| Definition | this Patch operation is to add a ccRemark A named part of a multi-part parameter. |
| Short | parameter part: type is addNamed part of a multi-part parameter |
| Comments | Only one level of nested parameters is allowed. |
| Control | 10..1* |
| Type | BackboneElement |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Parameters.parameter:operation.part:type.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored even if unrecognized |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
| Summary | true |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content, modifiers |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 22. Parameters.parameter:operation.part:type.name | |
| Definition | The name of the parameter (reference to the operation definition). |
| Short | Name from the definition |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Fixed Value | type |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 24. Parameters.parameter:operation.part:type.value[x] | |
| Definition | If the parameter is a data type. |
| Short | If parameter is a data type |
| Control | 10..1 This element is affected by the following invariants: inv-1 |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Parameters.parameter.part.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 26. Parameters.parameter:operation.part:type.value[x]:valueCode | |
| Slice Name | valueCode |
| Definition | If the parameter is a data type. |
| Short | If parameter is a data type |
| Control | 10..1 This element is affected by the following invariants: inv-1 |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Fixed Value | add |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Parameters.parameter:operation.part:path | |
| Slice Name | path |
| Definition | The FHIR path for adding ccRemark to Risk Adjustment Coding Gap Report. ccRemark is added to the MeasureReport.group, the path should be a value starting with 'MeasureReport.group.where(id=', with the group id that the ccRemark is added to. A named part of a multi-part parameter. |
| Short | parameter part: FHIR pathNamed part of a multi-part parameter |
| Comments | Only one level of nested parameters is allowed. |
| Control | 10..1* |
| Type | BackboneElement |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 30. Parameters.parameter:operation.part:path.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored even if unrecognized |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
| Summary | true |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content, modifiers |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 32. Parameters.parameter:operation.part:path.name | |
| Definition | The name of the parameter (reference to the operation definition). |
| Short | Name from the definition |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Fixed Value | path |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Parameters.parameter:operation.part:path.value[x] | |
| Definition | If the parameter is a data type. |
| Short | If parameter is a data type |
| Control | 10..1 This element is affected by the following invariants: inv-1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Parameters.parameter.part.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 36. Parameters.parameter:operation.part:path.value[x]:valueString | |
| Slice Name | valueString |
| Definition | If the parameter is a data type. |
| Short | If parameter is a data type |
| Control | 10..1 This element is affected by the following invariants: inv-1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ra-3: Path must start with 'MeasureReport.group.where(id='. ( value.startsWith('MeasureReport.group.where(id=')) |
| 38. Parameters.parameter:operation.part:name | |
| Slice Name | name |
| Definition | extension A named part of a multi-part parameter. |
| Short | parameter part: nameNamed part of a multi-part parameter |
| Comments | Only one level of nested parameters is allowed. |
| Control | 10..1* |
| Type | BackboneElement |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 40. Parameters.parameter:operation.part:name.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored even if unrecognized |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
| Summary | true |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content, modifiers |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 42. Parameters.parameter:operation.part:name.name | |
| Definition | The name of the parameter (reference to the operation definition). |
| Short | Name from the definition |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Fixed Value | name |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 44. Parameters.parameter:operation.part:name.value[x] | |
| Definition | If the parameter is a data type. |
| Short | If parameter is a data type |
| Control | 10..1 This element is affected by the following invariants: inv-1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Parameters.parameter.part.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 46. Parameters.parameter:operation.part:name.value[x]:valueString | |
| Slice Name | valueString |
| Definition | If the parameter is a data type. |
| Short | If parameter is a data type |
| Control | 10..1 This element is affected by the following invariants: inv-1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Fixed Value | extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 48. Parameters.parameter:operation.part:value | |
| Slice Name | value |
| Definition | The ccRemark data that needs to be patched A named part of a multi-part parameter. |
| Short | parameter part: valueNamed part of a multi-part parameter |
| Comments | Only one level of nested parameters is allowed. |
| Control | 10..1* |
| Type | BackboneElement |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 50. Parameters.parameter:operation.part:value.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored even if unrecognized |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
| Summary | true |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content, modifiers |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 52. Parameters.parameter:operation.part:value.name | |
| Definition | The name of the parameter (reference to the operation definition). |
| Short | Name from the definition |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Fixed Value | value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 54. Parameters.parameter:operation.part:value.part | |
| Definition | A named part of a multi-part parameter. |
| Short | Named part of a multi-part parameter |
| Comments | Only one level of nested parameters is allowed. |
| Control | 10..* |
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 56. Parameters.parameter:operation.part:value.part:url | |
| Slice Name | url |
| Definition | Url for the Risk Adjustment ccRemark extension A named part of a multi-part parameter. |
| Short | url of the ccRemark extensionNamed part of a multi-part parameter |
| Comments | Only one level of nested parameters is allowed. |
| Control | 10..1* |
| Type | BackboneElement |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 58. Parameters.parameter:operation.part:value.part:url.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored even if unrecognized |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
| Summary | true |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content, modifiers |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 60. Parameters.parameter:operation.part:value.part:url.name | |
| Definition | The name of the parameter (reference to the operation definition). |
| Short | Name from the definition |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Fixed Value | url |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 62. Parameters.parameter:operation.part:value.part:url.value[x] | |
| Definition | If the parameter is a data type. |
| Short | If parameter is a data type |
| Control | 10..1 This element is affected by the following invariants: inv-1 |
| Type | uri, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Fixed Value | http://hl7.org/fhir/us/davinci-ra/StructureDefinition/ra-ccRemark |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 64. Parameters.parameter:operation.part:value.part:extension | |
| Slice Name | extension |
| Definition | Content of Risk Adjustment ccRemark complex extension to be added by the Patch operation. A named part of a multi-part parameter. |
| Short | ccRemark content to be addedNamed part of a multi-part parameter |
| Comments | Only one level of nested parameters is allowed. |
| Control | 10..1* |
| Type | BackboneElement |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Parameters.parameter:operation.part:value.part:extension.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored even if unrecognized |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
| Summary | true |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content, modifiers |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 68. Parameters.parameter:operation.part:value.part:extension.name | |
| Definition | The name of the parameter (reference to the operation definition). |
| Short | Name from the definition |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Fixed Value | extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 70. Parameters.parameter:operation.part:value.part:extension.part | |
| Definition | A named part of a multi-part parameter. |
| Short | Named part of a multi-part parameter |
| Comments | Only one level of nested parameters is allowed. |
| Control | 10..* |
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Parameters | |||||
| Definition | This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it. | ||||
| Short | Operation Request or Response | ||||
| Comments | The parameters that may be used are defined by the OperationDefinition resource. | ||||
| Control | 0..* | ||||
| Is Modifier | false | ||||
| Must Support | false | ||||
| Summary | false | ||||
| 2. Parameters.id | |||||
| Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
| Short | Logical id of this artifact | ||||
| Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
| Control | 0..1 | ||||
| Type | id | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| 4. Parameters.meta | |||||
| Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
| Short | Metadata about the resource | ||||
| Control | 0..1 | ||||
| Type | Meta | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 6. Parameters.implicitRules | |||||
| Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
| Short | A set of rules under which this content was created | ||||
| Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
| Control | 0..1 | ||||
| Type | uri | ||||
| Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 8. Parameters.language | |||||
| Definition | The base language in which the resource is written. | ||||
| Short | Language of the resource content | ||||
| Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
| Control | 0..1 | ||||
| Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages)A human language.
| ||||
| Type | code | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | false | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 10. Parameters.parameter | |||||
| Definition | A parameter passed to or received from the operation. | ||||
| Short | Operation Parameter | ||||
| Control | 0..* | ||||
| Type | BackboneElement | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))) | ||||
| Slicing | This element introduces a set of slices on Parameters.parameter. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 12. Parameters.parameter.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 14. Parameters.parameter.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 16. Parameters.parameter.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored even if unrecognized | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
| Summary | true | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 18. Parameters.parameter.name | |||||
| Definition | The name of the parameter (reference to the operation definition). | ||||
| Short | Name from the definition | ||||
| Control | 1..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 20. Parameters.parameter.value[x] | |||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 22. Parameters.parameter.resource | |||||
| Definition | If the parameter is a whole resource. | ||||
| Short | If parameter is a whole resource | ||||
| Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Resource | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| 24. Parameters.parameter.part | |||||
| Definition | A named part of a multi-part parameter. | ||||
| Short | Named part of a multi-part parameter | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 0..* | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 26. Parameters.parameter:operation | |||||
| Slice Name | operation | ||||
| Definition | This parameter for patch operation | ||||
| Short | Patch operation | ||||
| Comments | comment. | ||||
| Control | 0..* | ||||
| Type | BackboneElement | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))inv-1: A parameter must have one and only one of (value, resource, part) ( (part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists()))) | ||||
| 28. Parameters.parameter:operation.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 30. Parameters.parameter:operation.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 32. Parameters.parameter:operation.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored even if unrecognized | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
| Summary | true | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 34. Parameters.parameter:operation.name | |||||
| Definition | The name of the parameter (reference to the operation definition). | ||||
| Short | Name from the definition | ||||
| Control | 1..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Fixed Value | operation | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 36. Parameters.parameter:operation.value[x] | |||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 38. Parameters.parameter:operation.resource | |||||
| Definition | If the parameter is a whole resource. | ||||
| Short | If parameter is a whole resource | ||||
| Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Resource | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| 40. Parameters.parameter:operation.part | |||||
| Definition | A named part of a multi-part parameter. | ||||
| Short | Named part of a multi-part parameter | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 0..* | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| Slicing | This element introduces a set of slices on Parameters.parameter.part. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 42. Parameters.parameter:operation.part:type | |||||
| Slice Name | type | ||||
| Definition | this Patch operation is to add a ccRemark | ||||
| Short | parameter part: type is add | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 1..1 | ||||
| Type | BackboneElement | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 44. Parameters.parameter:operation.part:type.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 46. Parameters.parameter:operation.part:type.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 48. Parameters.parameter:operation.part:type.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored even if unrecognized | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
| Summary | true | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 50. Parameters.parameter:operation.part:type.name | |||||
| Definition | The name of the parameter (reference to the operation definition). | ||||
| Short | Name from the definition | ||||
| Control | 1..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Fixed Value | type | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 52. Parameters.parameter:operation.part:type.value[x] | |||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 1..1 This element is affected by the following invariants: inv-1 | ||||
| Type | code | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| Slicing | This element introduces a set of slices on Parameters.parameter.part.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators: | ||||
| 54. Parameters.parameter:operation.part:type.value[x]:valueCode | |||||
| Slice Name | valueCode | ||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 1..1 This element is affected by the following invariants: inv-1 | ||||
| Type | code | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Fixed Value | add | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 56. Parameters.parameter:operation.part:type.resource | |||||
| Definition | If the parameter is a whole resource. | ||||
| Short | If parameter is a whole resource | ||||
| Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Resource | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| 58. Parameters.parameter:operation.part:type.part | |||||
| Definition | A named part of a multi-part parameter. | ||||
| Short | Named part of a multi-part parameter | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 0..* | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 60. Parameters.parameter:operation.part:path | |||||
| Slice Name | path | ||||
| Definition | The FHIR path for adding ccRemark to Risk Adjustment Coding Gap Report. ccRemark is added to the MeasureReport.group, the path should be a value starting with 'MeasureReport.group.where(id=', with the group id that the ccRemark is added to. | ||||
| Short | parameter part: FHIR path | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 1..1 | ||||
| Type | BackboneElement | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 62. Parameters.parameter:operation.part:path.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 64. Parameters.parameter:operation.part:path.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 66. Parameters.parameter:operation.part:path.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored even if unrecognized | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
| Summary | true | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 68. Parameters.parameter:operation.part:path.name | |||||
| Definition | The name of the parameter (reference to the operation definition). | ||||
| Short | Name from the definition | ||||
| Control | 1..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Fixed Value | path | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 70. Parameters.parameter:operation.part:path.value[x] | |||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 1..1 This element is affected by the following invariants: inv-1 | ||||
| Type | string | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| Slicing | This element introduces a set of slices on Parameters.parameter.part.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators: | ||||
| 72. Parameters.parameter:operation.part:path.value[x]:valueString | |||||
| Slice Name | valueString | ||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 1..1 This element is affected by the following invariants: inv-1 | ||||
| Type | string | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ra-3: Path must start with 'MeasureReport.group.where(id='. ( value.startsWith('MeasureReport.group.where(id=')) | ||||
| 74. Parameters.parameter:operation.part:path.resource | |||||
| Definition | If the parameter is a whole resource. | ||||
| Short | If parameter is a whole resource | ||||
| Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Resource | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| 76. Parameters.parameter:operation.part:path.part | |||||
| Definition | A named part of a multi-part parameter. | ||||
| Short | Named part of a multi-part parameter | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 0..* | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 78. Parameters.parameter:operation.part:name | |||||
| Slice Name | name | ||||
| Definition | extension | ||||
| Short | parameter part: name | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 1..1 | ||||
| Type | BackboneElement | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 80. Parameters.parameter:operation.part:name.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 82. Parameters.parameter:operation.part:name.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 84. Parameters.parameter:operation.part:name.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored even if unrecognized | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
| Summary | true | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 86. Parameters.parameter:operation.part:name.name | |||||
| Definition | The name of the parameter (reference to the operation definition). | ||||
| Short | Name from the definition | ||||
| Control | 1..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Fixed Value | name | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 88. Parameters.parameter:operation.part:name.value[x] | |||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 1..1 This element is affected by the following invariants: inv-1 | ||||
| Type | string | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| Slicing | This element introduces a set of slices on Parameters.parameter.part.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators: | ||||
| 90. Parameters.parameter:operation.part:name.value[x]:valueString | |||||
| Slice Name | valueString | ||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 1..1 This element is affected by the following invariants: inv-1 | ||||
| Type | string | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Fixed Value | extension | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 92. Parameters.parameter:operation.part:name.resource | |||||
| Definition | If the parameter is a whole resource. | ||||
| Short | If parameter is a whole resource | ||||
| Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Resource | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| 94. Parameters.parameter:operation.part:name.part | |||||
| Definition | A named part of a multi-part parameter. | ||||
| Short | Named part of a multi-part parameter | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 0..* | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 96. Parameters.parameter:operation.part:value | |||||
| Slice Name | value | ||||
| Definition | The ccRemark data that needs to be patched | ||||
| Short | parameter part: value | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 1..1 | ||||
| Type | BackboneElement | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 98. Parameters.parameter:operation.part:value.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 100. Parameters.parameter:operation.part:value.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 102. Parameters.parameter:operation.part:value.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored even if unrecognized | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
| Summary | true | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 104. Parameters.parameter:operation.part:value.name | |||||
| Definition | The name of the parameter (reference to the operation definition). | ||||
| Short | Name from the definition | ||||
| Control | 1..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Fixed Value | value | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 106. Parameters.parameter:operation.part:value.value[x] | |||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 108. Parameters.parameter:operation.part:value.resource | |||||
| Definition | If the parameter is a whole resource. | ||||
| Short | If parameter is a whole resource | ||||
| Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Resource | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| 110. Parameters.parameter:operation.part:value.part | |||||
| Definition | A named part of a multi-part parameter. | ||||
| Short | Named part of a multi-part parameter | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 1..* | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| Slicing | This element introduces a set of slices on Parameters.parameter.part.part. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 112. Parameters.parameter:operation.part:value.part:url | |||||
| Slice Name | url | ||||
| Definition | Url for the Risk Adjustment ccRemark extension | ||||
| Short | url of the ccRemark extension | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 1..1 | ||||
| Type | BackboneElement | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 114. Parameters.parameter:operation.part:value.part:url.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 116. Parameters.parameter:operation.part:value.part:url.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 118. Parameters.parameter:operation.part:value.part:url.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored even if unrecognized | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
| Summary | true | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 120. Parameters.parameter:operation.part:value.part:url.name | |||||
| Definition | The name of the parameter (reference to the operation definition). | ||||
| Short | Name from the definition | ||||
| Control | 1..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Fixed Value | url | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 122. Parameters.parameter:operation.part:value.part:url.value[x] | |||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 1..1 This element is affected by the following invariants: inv-1 | ||||
| Type | uri | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Fixed Value | http://hl7.org/fhir/us/davinci-ra/StructureDefinition/ra-ccRemark | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 124. Parameters.parameter:operation.part:value.part:url.resource | |||||
| Definition | If the parameter is a whole resource. | ||||
| Short | If parameter is a whole resource | ||||
| Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Resource | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| 126. Parameters.parameter:operation.part:value.part:url.part | |||||
| Definition | A named part of a multi-part parameter. | ||||
| Short | Named part of a multi-part parameter | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 0..* | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 128. Parameters.parameter:operation.part:value.part:extension | |||||
| Slice Name | extension | ||||
| Definition | Content of Risk Adjustment ccRemark complex extension to be added by the Patch operation. | ||||
| Short | ccRemark content to be added | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 1..1 | ||||
| Type | BackboneElement | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 130. Parameters.parameter:operation.part:value.part:extension.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 132. Parameters.parameter:operation.part:value.part:extension.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 134. Parameters.parameter:operation.part:value.part:extension.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored even if unrecognized | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
| Summary | true | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 136. Parameters.parameter:operation.part:value.part:extension.name | |||||
| Definition | The name of the parameter (reference to the operation definition). | ||||
| Short | Name from the definition | ||||
| Control | 1..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Fixed Value | extension | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 138. Parameters.parameter:operation.part:value.part:extension.value[x] | |||||
| Definition | If the parameter is a data type. | ||||
| Short | If parameter is a data type | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 140. Parameters.parameter:operation.part:value.part:extension.resource | |||||
| Definition | If the parameter is a whole resource. | ||||
| Short | If parameter is a whole resource | ||||
| Comments | When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods. | ||||
| Control | 0..1 This element is affected by the following invariants: inv-1 | ||||
| Type | Resource | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| 142. Parameters.parameter:operation.part:value.part:extension.part | |||||
| Definition | A named part of a multi-part parameter. | ||||
| Short | Named part of a multi-part parameter | ||||
| Comments | Only one level of nested parameters is allowed. | ||||
| Control | 1..* | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
IG © 2021+ HL7 International / Clinical Quality Information. Package hl7.fhir.us.davinci-ra#2.0.0 based on FHIR 4.0.1. Generated 2025-02-24
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change