SGHI FHIR Profile Implementation Guide
0.1.0 - ci-build

SGHI FHIR Profile Implementation Guide, published by Kathurima Kimathi. This guide is not an authorized publication; it is the continuous build for version 0.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/savannahghi/sil_fhir_profile_ig/ and changes regularly. See the Directory of published versions

Resource Profile: SGHICondition - Detailed Descriptions

Draft as of 2025-09-04

Definitions for the sghi-condition resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Condition
Definition

A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

ShortDetailed information about conditions, problems or diagnoses
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantscon-2: If category is problems list item, the clinicalStatus should not be unknown (category.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-category' and code='problem-list-item').exists() implies clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and code='unknown').exists().not())
con-3: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission. (abatement.exists() implies (clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='inactive' or code='resolved' or code='remission')).exists()))
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Condition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Condition.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. Condition.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Condition.identifier
Definition

Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

ShortExternal Ids for this condition
Comments

This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Condition.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|5.0.0
(required to http://hl7.org/fhir/ValueSet/identifier-use)
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Condition.identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control0..1
BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from SGHI Standard Identifier Typeshttp://hl7.org/fhir/ValueSet/identifier-type
(required to https://fhir.slade360.co.ke/fhir/ValueSet/sghi-identifier-types)
TypeCodeableConcept(SGHI CodeableConcept)
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Condition.identifier.system
Definition

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExampleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Condition.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
This element is affected by the following invariants: ident-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
ExampleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Condition.identifier.assigner
Definition

Organization that issued/manages the identifier.

ShortOrganization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Control10..1
TypeReference(SGHI Reference)(SGHI Organization, Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Condition.clinicalStatus
Definition

The clinical status of the condition.

Shortactive | recurrence | relapse | inactive | remission | resolved | unknown
Comments

The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity. clinicalStatus is required since it is a modifier element. For conditions that are problems list items, the clinicalStatus should not be unknown. For conditions that are not problem list items, the clinicalStatus may be unknown. For example, conditions derived from a claim are point in time, so those conditions may have a clinicalStatus of unknown

Control1..1
This element is affected by the following invariants: con-3, con-2
BindingThe codes SHALL be taken from ConditionClinicalStatusCodeshttp://hl7.org/fhir/ValueSet/condition-clinical|5.0.0
(required to http://hl7.org/fhir/ValueSet/condition-clinical|5.0.0)

The clinical status of the condition or diagnosis.

TypeCodeableConcept(SGHI CodeableConcept)
Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Condition.verificationStatus
Definition

The verification status to support the clinical status of the condition. The verification status pertains to the condition, itself, not to any specific condition attribute.

Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
Comments

verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

Control10..1
BindingThe codes SHALL be taken from ConditionVerificationStatushttp://hl7.org/fhir/ValueSet/condition-ver-status|5.0.0
(required to http://hl7.org/fhir/ValueSet/condition-ver-status|5.0.0)

The verification status to support or decline the clinical status of the condition or diagnosis.

TypeCodeableConcept(SGHI CodeableConcept)
Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Condition.category
Definition

A category assigned to the condition.

Shortproblem-list-item | encounter-diagnosis
Comments

The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

Control10..*
This element is affected by the following invariants: con-2
BindingThe codes SHOULD be taken from ConditionCategoryCodeshttp://hl7.org/fhir/ValueSet/condition-category
(preferred to http://hl7.org/fhir/ValueSet/condition-category)

A category assigned to the condition.

TypeCodeableConcept(SGHI CodeableConcept)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Condition.severity
Definition

A subjective assessment of the severity of the condition as evaluated by the clinician.

ShortSubjective severity of condition
Comments

Coding of the severity with a terminology is preferred, where possible.

Control10..1
BindingThe codes SHALL be taken from The codes SHOULD be taken from sghi-condition-severityhttp://hl7.org/fhir/ValueSet/condition-severity
(required to https://fhir.slade360.co.ke/fhir/ValueSet/sghi-condition-severity)

Custom severity values intentionally override the HL7 preferred ConditionSeverity ValueSet.


A subjective assessment of the severity of the condition as evaluated by the clinician.

TypeCodeableConcept(SGHI CodeableConcept)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Condition.code
Definition

Identification of the condition, problem or diagnosis.

ShortIdentification of the condition, problem or diagnosis
Control10..1
BindingThe codes SHALL be taken from For example codes, see All ICD-11 codeshttp://hl7.org/fhir/ValueSet/condition-code
(required to https://fhir.slade360.co.ke/fhir/ValueSet/ICD11Codes)
TypeCodeableConcept(SGHI CodeableConcept)
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

0..1 to account for primarily narrative only resources.

Alternate Namestype
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Condition.bodySite
Definition

The anatomical location where this condition manifests itself.

ShortAnatomical location, if relevant
Comments

Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodyStructure resource (e.g. to identify and track separately) then use the standard extension http://hl7.org/fhir/StructureDefinition/bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

Control0..*
BindingThe codes SHALL be taken from For example codes, see All ICD-11 codeshttp://hl7.org/fhir/ValueSet/body-site
(required to https://fhir.slade360.co.ke/fhir/ValueSet/ICD11Codes)
TypeCodeableConcept(SGHI CodeableConcept)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Condition.subject
Definition

Indicates the patient or group who the condition record is associated with.

ShortWho has the condition?
Control1..1
TypeReference(SGHI Reference)(SGHI Patient, Patient, Group)
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Group is typically used for veterinary or public health use cases.

Alternate Namespatient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Condition.encounter
Definition

The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

ShortThe Encounter during which this Condition was created
Comments

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

Control10..1
TypeReference(SGHI Reference)(SGHI Encounter, Encounter)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Condition.onset[x]
Definition

Estimated or actual date or date-time the condition began, in the opinion of the clinician.

ShortEstimated or actual date, date-time, or age
Comments

Age is generally used when the patient reports an age at which the Condition began to occur. Period is generally used to convey an imprecise onset that occurred within the time period. For example, Period is not intended to convey the transition period before the chronic bronchitis or COPD condition was diagnosed, but Period can be used to convey an imprecise diagnosis date. Range is generally used to convey an imprecise age range (e.g. 4 to 6 years old). Because a Condition.code can represent multiple levels of granularity and can be modified over time, the onset and abatement dates can have ambiguity whether those dates apply to the current Condition.code or an earlier representation of that Condition.code. For example, if the Condition.code was initially documented as severe asthma, then it is ambiguous whether the onset and abatement dates apply to asthma (overall in that subject's lifetime) or when asthma transitioned to become severe.

Control0..1
TypedateTime, string, Period, Range, Age
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Condition.abatement[x]
Definition

The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Some conditions, such as chronic conditions, are never really resolved, but they can abate.

ShortWhen in resolution/remission
Comments

There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated. Because a Condition.code can represent multiple levels of granularity and can be modified over time, the onset and abatement dates can have ambiguity whether those dates apply to the current Condition.code or an earlier representation of that Condition.code. For example, if the Condition.code was initially documented as severe asthma, then it is ambiguous whether the onset and abatement dates apply to asthma (overall in that subject's lifetime) or when asthma transitioned to become severe.

Control0..1
This element is affected by the following invariants: con-3
TypedateTime, string, Period, Range, Age
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Condition.recordedDate
Definition

The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

ShortDate condition was first recorded
Comments

When onset date is unknown, recordedDate can be used to establish if the condition was present on or before a given date. If the recordedDate is known and provided by a sending system, it is preferred that the receiving system preserve that recordedDate value. If the recordedDate is not provided by the sending system, the receipt timestamp is sometimes used as the recordedDate.

Control10..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Condition.participant
Definition

Indicates who or what participated in the activities related to the condition and how they were involved.

ShortWho or what participated in the activities related to the condition and how they were involved
Control10..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Condition.participant.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Condition.participant.actor
Definition

Indicates who or what participated in the activities related to the condition.

ShortWho or what participated in the activities related to the condition
Control1..1
TypeReference(SGHI Reference)(SGHI Patient, SGHI Organization, Practitioner, PractitionerRole, Patient, RelatedPerson, Device, Organization, CareTeam)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Condition
2. Condition.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..?
4. Condition.identifier.use
BindingThe codes SHALL be taken from IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use)
6. Condition.identifier.type
BindingThe codes SHALL be taken from SGHI Standard Identifier Types
(required to https://fhir.slade360.co.ke/fhir/ValueSet/sghi-identifier-types)
TypeCodeableConcept(SGHI CodeableConcept)
8. Condition.identifier.system
Control1..?
10. Condition.identifier.value
Control1..?
12. Condition.identifier.assigner
Control1..?
TypeReference(SGHI Reference)(SGHI Organization)
14. Condition.clinicalStatus
TypeCodeableConcept(SGHI CodeableConcept)
16. Condition.verificationStatus
Control1..?
TypeCodeableConcept(SGHI CodeableConcept)
18. Condition.category
Control1..?
TypeCodeableConcept(SGHI CodeableConcept)
20. Condition.severity
Control1..?
BindingThe codes SHALL be taken from sghi-condition-severity
(required to https://fhir.slade360.co.ke/fhir/ValueSet/sghi-condition-severity)

Custom severity values intentionally override the HL7 preferred ConditionSeverity ValueSet.

TypeCodeableConcept(SGHI CodeableConcept)
22. Condition.code
Control1..?
BindingThe codes SHALL be taken from All ICD-11 codes
(required to https://fhir.slade360.co.ke/fhir/ValueSet/ICD11Codes)
TypeCodeableConcept(SGHI CodeableConcept)
24. Condition.bodySite
BindingThe codes SHALL be taken from All ICD-11 codes
(required to https://fhir.slade360.co.ke/fhir/ValueSet/ICD11Codes)
TypeCodeableConcept(SGHI CodeableConcept)
26. Condition.subject
TypeReference(SGHI Reference)(SGHI Patient)
28. Condition.encounter
Control1..?
TypeReference(SGHI Reference)(SGHI Encounter)
30. Condition.onset[x]
TypedateTime, string, Period, Range, Age
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
32. Condition.abatement[x]
TypedateTime, string, Period, Range, Age
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
34. Condition.recordedDate
Control1..?
36. Condition.participant
Control1..?
38. Condition.participant.actor
TypeReference(SGHI Reference)(SGHI Patient, SGHI Organization)
40. Condition.stage
42. Condition.stage.assessment
TypeReference(SGHI Reference)(SGHI DiagnosticReport, SGHI Observation)

Guidance on how to interpret the contents of this table can be foundhere

0. Condition
Definition

A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

ShortDetailed information about conditions, problems or diagnoses
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantscon-2: If category is problems list item, the clinicalStatus should not be unknown (category.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-category' and code='problem-list-item').exists() implies clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and code='unknown').exists().not())
con-3: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission. (abatement.exists() implies (clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='inactive' or code='resolved' or code='remission')).exists()))
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Condition.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

Control0..1
Typeid
Is Modifierfalse
Must Supportfalse
Summarytrue
4. Condition.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Condition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Condition.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from AllLanguages
(required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

IETF language tag for a human language

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Condition.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
This element is affected by the following invariants: dom-6
TypeNarrative
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Condition.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. Condition.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Condition.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Condition.identifier
Definition

Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

ShortExternal Ids for this condition
Comments

This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Condition.identifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
22. Condition.identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Condition.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 24. Condition.identifier.use
    Definition

    The purpose of this identifier.

    Shortusual | official | temp | secondary | old (If known)
    Comments

    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..1
    BindingThe codes SHALL be taken from IdentifierUse
    (required to http://hl7.org/fhir/ValueSet/identifier-use)
    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Condition.identifier.type
    Definition

    A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

    ShortDescription of identifier
    Comments

    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

    Control0..1
    BindingThe codes SHALL be taken from SGHI Standard Identifier Types
    (required to https://fhir.slade360.co.ke/fhir/ValueSet/sghi-identifier-types)
    TypeCodeableConcept(SGHI CodeableConcept)
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows users to make use of identifiers when the identifier system is not known.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Condition.identifier.system
    Definition

    Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

    ShortThe namespace for the identifier value
    Comments

    Identifier.system is always case sensitive.

    Control1..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

    ExampleGeneral: http://www.acme.com/identifiers/patient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. Condition.identifier.value
    Definition

    The portion of the identifier typically relevant to the user and which is unique within the context of the system.

    ShortThe value that is unique
    Comments

    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

    Control1..1
    This element is affected by the following invariants: ident-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    ExampleGeneral: 123456
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. Condition.identifier.period
    Definition

    Time period during which identifier is/was valid for use.

    ShortTime period when id is/was valid for use
    Control0..1
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. Condition.identifier.assigner
    Definition

    Organization that issued/manages the identifier.

    ShortOrganization that issued id (may be just text)
    Comments

    The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

    Control1..1
    TypeReference(SGHI Reference)(SGHI Organization)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Condition.clinicalStatus
    Definition

    The clinical status of the condition.

    Shortactive | recurrence | relapse | inactive | remission | resolved | unknown
    Comments

    The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity. clinicalStatus is required since it is a modifier element. For conditions that are problems list items, the clinicalStatus should not be unknown. For conditions that are not problem list items, the clinicalStatus may be unknown. For example, conditions derived from a claim are point in time, so those conditions may have a clinicalStatus of unknown

    Control1..1
    This element is affected by the following invariants: con-3, con-2
    BindingThe codes SHALL be taken from ConditionClinicalStatusCodes
    (required to http://hl7.org/fhir/ValueSet/condition-clinical|5.0.0)

    The clinical status of the condition or diagnosis.

    TypeCodeableConcept(SGHI CodeableConcept)
    Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Condition.verificationStatus
    Definition

    The verification status to support the clinical status of the condition. The verification status pertains to the condition, itself, not to any specific condition attribute.

    Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
    Comments

    verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

    Control1..1
    BindingThe codes SHALL be taken from ConditionVerificationStatus
    (required to http://hl7.org/fhir/ValueSet/condition-ver-status|5.0.0)

    The verification status to support or decline the clinical status of the condition or diagnosis.

    TypeCodeableConcept(SGHI CodeableConcept)
    Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Condition.category
    Definition

    A category assigned to the condition.

    Shortproblem-list-item | encounter-diagnosis
    Comments

    The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

    Control1..*
    This element is affected by the following invariants: con-2
    BindingThe codes SHOULD be taken from ConditionCategoryCodes
    (preferred to http://hl7.org/fhir/ValueSet/condition-category)

    A category assigned to the condition.

    TypeCodeableConcept(SGHI CodeableConcept)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Condition.severity
    Definition

    A subjective assessment of the severity of the condition as evaluated by the clinician.

    ShortSubjective severity of condition
    Comments

    Coding of the severity with a terminology is preferred, where possible.

    Control1..1
    BindingThe codes SHALL be taken from sghi-condition-severity
    (required to https://fhir.slade360.co.ke/fhir/ValueSet/sghi-condition-severity)

    Custom severity values intentionally override the HL7 preferred ConditionSeverity ValueSet.

    TypeCodeableConcept(SGHI CodeableConcept)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. Condition.code
    Definition

    Identification of the condition, problem or diagnosis.

    ShortIdentification of the condition, problem or diagnosis
    Control1..1
    BindingThe codes SHALL be taken from All ICD-11 codes
    (required to https://fhir.slade360.co.ke/fhir/ValueSet/ICD11Codes)
    TypeCodeableConcept(SGHI CodeableConcept)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    0..1 to account for primarily narrative only resources.

    Alternate Namestype
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Condition.bodySite
    Definition

    The anatomical location where this condition manifests itself.

    ShortAnatomical location, if relevant
    Comments

    Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodyStructure resource (e.g. to identify and track separately) then use the standard extension http://hl7.org/fhir/StructureDefinition/bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

    Control0..*
    BindingThe codes SHALL be taken from All ICD-11 codes
    (required to https://fhir.slade360.co.ke/fhir/ValueSet/ICD11Codes)
    TypeCodeableConcept(SGHI CodeableConcept)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    48. Condition.subject
    Definition

    Indicates the patient or group who the condition record is associated with.

    ShortWho has the condition?
    Control1..1
    TypeReference(SGHI Reference)(SGHI Patient)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    Group is typically used for veterinary or public health use cases.

    Alternate Namespatient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    50. Condition.encounter
    Definition

    The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

    ShortThe Encounter during which this Condition was created
    Comments

    This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

    Control1..1
    TypeReference(SGHI Reference)(SGHI Encounter)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    52. Condition.onset[x]
    Definition

    Estimated or actual date or date-time the condition began, in the opinion of the clinician.

    ShortEstimated or actual date, date-time, or age
    Comments

    Age is generally used when the patient reports an age at which the Condition began to occur. Period is generally used to convey an imprecise onset that occurred within the time period. For example, Period is not intended to convey the transition period before the chronic bronchitis or COPD condition was diagnosed, but Period can be used to convey an imprecise diagnosis date. Range is generally used to convey an imprecise age range (e.g. 4 to 6 years old). Because a Condition.code can represent multiple levels of granularity and can be modified over time, the onset and abatement dates can have ambiguity whether those dates apply to the current Condition.code or an earlier representation of that Condition.code. For example, if the Condition.code was initially documented as severe asthma, then it is ambiguous whether the onset and abatement dates apply to asthma (overall in that subject's lifetime) or when asthma transitioned to become severe.

    Control0..1
    TypedateTime
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Condition.abatement[x]
    Definition

    The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Some conditions, such as chronic conditions, are never really resolved, but they can abate.

    ShortWhen in resolution/remission
    Comments

    There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated. Because a Condition.code can represent multiple levels of granularity and can be modified over time, the onset and abatement dates can have ambiguity whether those dates apply to the current Condition.code or an earlier representation of that Condition.code. For example, if the Condition.code was initially documented as severe asthma, then it is ambiguous whether the onset and abatement dates apply to asthma (overall in that subject's lifetime) or when asthma transitioned to become severe.

    Control0..1
    This element is affected by the following invariants: con-3
    TypedateTime
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Condition.recordedDate
    Definition

    The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

    ShortDate condition was first recorded
    Comments

    When onset date is unknown, recordedDate can be used to establish if the condition was present on or before a given date. If the recordedDate is known and provided by a sending system, it is preferred that the receiving system preserve that recordedDate value. If the recordedDate is not provided by the sending system, the receipt timestamp is sometimes used as the recordedDate.

    Control1..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. Condition.participant
    Definition

    Indicates who or what participated in the activities related to the condition and how they were involved.

    ShortWho or what participated in the activities related to the condition and how they were involved
    Control1..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    60. Condition.participant.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    This element is affected by the following invariants: ele-1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    62. Condition.participant.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    64. Condition.participant.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    66. Condition.participant.function
    Definition

    Distinguishes the type of involvement of the actor in the activities related to the condition.

    ShortType of involvement
    Control0..1
    BindingUnless not suitable, these codes SHALL be taken from ParticipationRoleType
    (extensible to http://hl7.org/fhir/ValueSet/participation-role-type)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    68. Condition.participant.actor
    Definition

    Indicates who or what participated in the activities related to the condition.

    ShortWho or what participated in the activities related to the condition
    Control1..1
    TypeReference(SGHI Reference)(SGHI Patient, SGHI Organization)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    70. Condition.stage
    Definition

    A simple summary of the stage such as "Stage 3" or "Early Onset". The determination of the stage is disease-specific, such as cancer, retinopathy of prematurity, kidney diseases, Alzheimer's, or Parkinson disease.

    ShortStage/grade, usually assessed formally
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantscon-1: Stage SHALL have summary or assessment (summary.exists() or assessment.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    72. Condition.stage.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    This element is affected by the following invariants: ele-1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    74. Condition.stage.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    76. Condition.stage.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    78. Condition.stage.summary
    Definition

    A simple summary of the stage such as "Stage 3" or "Early Onset". The determination of the stage is disease-specific, such as cancer, retinopathy of prematurity, kidney diseases, Alzheimer's, or Parkinson disease.

    ShortSimple summary (disease specific)
    Control0..1
    This element is affected by the following invariants: con-1
    BindingFor example codes, see ConditionStage
    (example to http://hl7.org/fhir/ValueSet/condition-stage)

    Codes describing condition stages (e.g. Cancer stages).

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    80. Condition.stage.assessment
    Definition

    Reference to a formal record of the evidence on which the staging assessment is based.

    ShortFormal record of assessment
    Control0..*
    This element is affected by the following invariants: con-1
    TypeReference(SGHI Reference)(SGHI DiagnosticReport, SGHI Observation)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    82. Condition.stage.type
    Definition

    The kind of staging, such as pathological or clinical staging.

    ShortKind of staging
    Control0..1
    BindingFor example codes, see ConditionStageType
    (example to http://hl7.org/fhir/ValueSet/condition-stage-type)

    Codes describing the kind of condition staging (e.g. clinical or pathological).

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    84. Condition.evidence
    Definition

    Supporting evidence / manifestations that are the basis of the Condition's verification status, such as evidence that confirmed or refuted the condition.

    ShortSupporting evidence for the verification status
    Comments

    If the condition was confirmed, but subsequently refuted, then the evidence can be cumulative including all evidence over time. The evidence may be a simple list of coded symptoms/manifestations, or references to observations or formal assessments, or both. For example, if the Condition.code is pneumonia, then there could be an evidence list where Condition.evidence.concept = fever (CodeableConcept), Condition.evidence.concept = cough (CodeableConcept), and Condition.evidence.reference = bronchitis (reference to Condition).

    Control0..*
    BindingFor example codes, see SNOMEDCTClinicalFindings
    (example to http://hl7.org/fhir/ValueSet/clinical-findings)
    TypeCodeableReference(Resource)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    86. Condition.note
    Definition

    Additional information about the Condition. This is a general notes/comments entry for description of the Condition, its diagnosis and prognosis.

    ShortAdditional information about the Condition
    Control0..*
    TypeAnnotation
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))