International Patient Summary Implementation Guide
2.0.0-ballot - STU 2 Ballot
International Patient Summary Implementation Guide
2.0.0-ballot - STU 2 Ballot
International Patient Summary Implementation Guide, published by HL7 International / Patient Care. This guide is not an authorized publication; it is the continuous build for version 2.0.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/ritikarawlani/fhir-ips/ and changes regularly. See the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 2 |
Definitions for the Range-uv-ips data type profile.
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| 2. Range.low | |
| Type | Quantity(SimpleQuantity (IPS)) |
| Must Support | true |
| 4. Range.high | |
| Type | Quantity(SimpleQuantity (IPS)) |
| Must Support | true |
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| Definition | A set of ordered Quantities defined by a low and high limit. |
| Short | Set of values bounded by low and high |
| Comments | The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) rng-2: If present, low SHALL have a lower value than high ( low.empty() or high.empty() or (low <= high))rng-2: If present, low SHALL have a lower value than high (low.empty() or high.empty() or (low <= high)) |
| 2. Range.low | |
| Definition | A measured amount (or an amount that can potentially be measured). Note that measured amounts include amounts that are not precisely quantified, including amounts involving arbitrary units and floating currencies. This profile imposes that the code system for units be UCUM. The low limit. The boundary is inclusive. |
| Short | A measured amount using UCUMLow limit |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. If the low element is missing, the low boundary is not known. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(SimpleQuantity (IPS), SimpleQuantity) |
| Is Modifier | false |
| Must Support | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |
| 4. Range.high | |
| Definition | A measured amount (or an amount that can potentially be measured). Note that measured amounts include amounts that are not precisely quantified, including amounts involving arbitrary units and floating currencies. This profile imposes that the code system for units be UCUM. The high limit. The boundary is inclusive. |
| Short | A measured amount using UCUMHigh limit |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. If the high element is missing, the high boundary is not known. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(SimpleQuantity (IPS), SimpleQuantity) |
| Is Modifier | false |
| Must Support | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| Definition | A set of ordered Quantities defined by a low and high limit. |
| Short | Set of values bounded by low and high |
| Comments | The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))rng-2: If present, low SHALL have a lower value than high ( low.empty() or high.empty() or (low <= high)) |
| 2. Range.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Range.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Range.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Range.low | |
| Definition | A measured amount (or an amount that can potentially be measured). Note that measured amounts include amounts that are not precisely quantified, including amounts involving arbitrary units and floating currencies. This profile imposes that the code system for units be UCUM. |
| Short | A measured amount using UCUM |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(SimpleQuantity (IPS)) |
| Is Modifier | false |
| Must Support | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |
| 8. Range.high | |
| Definition | A measured amount (or an amount that can potentially be measured). Note that measured amounts include amounts that are not precisely quantified, including amounts involving arbitrary units and floating currencies. This profile imposes that the code system for units be UCUM. |
| Short | A measured amount using UCUM |
| Comments | The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Quantity(SimpleQuantity (IPS)) |
| Is Modifier | false |
| Must Support | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))qty-3: If a code for the unit is present, the system SHALL also be present ( code.empty() or system.exists())sqty-1: The comparator is not used on a SimpleQuantity ( comparator.empty()) |
IG © 2020+ HL7 International / Patient Care. Package hl7.fhir.uv.ips#2.0.0-ballot based on FHIR 4.0.1. Generated 2024-08-14
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change