CDC FHIR® Implementation Guide: Anonymized Electronic Initial Case Reporting (eICR)
1.0.0 - ci-build United States of America flag

CDC FHIR® Implementation Guide: Anonymized Electronic Initial Case Reporting (eICR), published by APHL. This guide is not an authorized publication; it is the continuous build for version 1.0.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/lantanagroup/FHIR-us-eicr-anonymized/ and changes regularly. See the Directory of published versions

Resource Profile: EICRAnonymizedPractitionerRole - Detailed Descriptions

Active as of 2024-08-26

Definitions for the eicr-anon-practitionerrole resource profile.

Guidance on how to interpret the contents of this table can be found here

0. PractitionerRole
2. PractitionerRole.text
Invariantseicr-anon-text: text.div SHALL be '<div xmlns="http://www.w3.org/1999/xhtml"><p>MASKED</p></div>' (exists() implies `div`.toString().matches('<div xmlns="http://www.w3.org/1999/xhtml">\\s*<p>MASKED</p>\\s*</div>'))
4. PractitionerRole.text.extension
Control1..?
6. PractitionerRole.text.extension:dataAbsentReason
Slice NamedataAbsentReason
ShortUse data-absent-reason with value 'masked'
Control1..1
TypeExtension(Data Absent Reason) (Extension Type: code)
Must Supporttrue
8. PractitionerRole.text.extension:dataAbsentReason.value[x]
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Fixed Valuemasked
10. PractitionerRole.text.div
ShortSet to '<div xmlns="http://www.w3.org/1999/xhtml"><p>MASKED</p></div>'
12. PractitionerRole.practitioner
TypeReference(eICR Anonymized Practitioner)
14. PractitionerRole.telecom
Invariantseicr-anon-prctrl-tel: PracitionerRole.telecom.value.value SHALL NOT be present (value.value.empty())
16. PractitionerRole.telecom.value
18. PractitionerRole.telecom.value.extension
Control1..?
SlicingThis element introduces a set of slices on PractitionerRole.telecom.value.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 20. PractitionerRole.telecom.value.extension:dataAbsentReason
    Slice NamedataAbsentReason
    ShortA value for telecom.value is not allowed, must use data-absent-reason with value 'masked'
    Control1..1
    TypeExtension(Data Absent Reason) (Extension Type: code)
    Must Supporttrue
    22. PractitionerRole.telecom.value.extension:dataAbsentReason.value[x]
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Fixed Valuemasked

    Guidance on how to interpret the contents of this table can be found here

    0. PractitionerRole
    Definition

    This is basic constraint on PractitionerRole for use in US Core resources.


    A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

    ShortUS Public Health PracitionerRoleRoles/organizations the practitioner is associated with
    Control0..*
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    pd-1: SHALL have contact information or a reference to an Endpoint (telecom or endpoint)
    us-core-13: SHALL have a practitioner, an organization, a healthcare service, or a location. (practitioner or organization or healthcareService or location)
    2. PractitionerRole.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. PractitionerRole.text
    Definition

    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

    ShortText summary of the resource, for human interpretation
    Comments

    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

    Control0..1
    TypeNarrative
    Is Modifierfalse
    Summaryfalse
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    eicr-anon-text: text.div SHALL be '<div xmlns="http://www.w3.org/1999/xhtml"><p>MASKED</p></div>' (exists() implies `div`.toString().matches('<div xmlns="http://www.w3.org/1999/xhtml">\\s*<p>MASKED</p>\\s*</div>'))
    6. PractitionerRole.text.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control10..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on PractitionerRole.text.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 8. PractitionerRole.text.extension:dataAbsentReason
      Slice NamedataAbsentReason
      Definition

      Provides a reason why the expected value or elements in the element that is extended are missing.

      ShortUse data-absent-reason with value 'masked'
      Control1..1
      TypeExtension(Data Absent Reason) (Extension Type: code)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      10. PractitionerRole.text.extension:dataAbsentReason.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..0*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on PractitionerRole.text.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 12. PractitionerRole.text.extension:dataAbsentReason.url
        Definition

        Source of the definition for the extension code - a logical name or a URL.

        Shortidentifies the meaning of the extension
        Comments

        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

        Control1..1
        Typeuri
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        Fixed Valuehttp://hl7.org/fhir/StructureDefinition/data-absent-reason
        14. PractitionerRole.text.extension:dataAbsentReason.value[x]
        Definition

        Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


        Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

        ShortValue of extension
        Control10..1
        This element is affected by the following invariants: ext-1
        BindingThe codes SHALL be taken from For codes, see DataAbsentReason
        (required to http://hl7.org/fhir/ValueSet/data-absent-reason)
        Typecode, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Fixed Valuemasked
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. PractitionerRole.text.status
        Definition

        The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data.

        Shortgenerated | extensions | additional | empty
        Control1..1
        BindingThe codes SHALL be taken from NarrativeStatushttp://hl7.org/fhir/ValueSet/narrative-status|4.0.1
        (required to http://hl7.org/fhir/ValueSet/narrative-status|4.0.1)

        The status of a resource narrative.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. PractitionerRole.text.div
        Definition

        The actual narrative content, a stripped down version of XHTML.

        ShortSet to '<div xmlns="http://www.w3.org/1999/xhtml"><p>MASKED</p></div>'Limited xhtml content
        Comments

        The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.

        Control1..1
        Typexhtml
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        txt-1: The narrative SHALL contain only the basic html formatting elements and attributes described in chapters 7-11 (except section 4 of chapter 9) and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained style attributes (htmlChecks())
        txt-2: The narrative SHALL have some non-whitespace content (htmlChecks())
        txt-1: The narrative SHALL contain only the basic html formatting elements and attributes described in chapters 7-11 (except section 4 of chapter 9) and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained style attributes (htmlChecks())
        txt-2: The narrative SHALL have some non-whitespace content (htmlChecks())
        20. PractitionerRole.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. PractitionerRole.identifier
        Definition

        Business Identifiers that are specific to a role/location.

        ShortBusiness Identifiers that are specific to a role/location
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control10..1*
        TypeIdentifier
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Often, specific identities are assigned for the agent.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. PractitionerRole.practitioner
        Definition

        Practitioner that is able to provide the defined services for the organization.

        ShortPractitioner that is able to provide the defined services for the organization
        Control10..1
        This element is affected by the following invariants: us-core-13
        TypeReference(eICR Anonymized Practitioner, Practitioner)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. PractitionerRole.organization
        Definition

        The organization where the Practitioner performs the roles associated.

        ShortOrganization where the roles are available
        Control0..1
        This element is affected by the following invariants: us-core-13
        TypeReference(US Public Health Organization, Organization)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. PractitionerRole.code
        Definition

        Roles which this practitioner is authorized to perform for the organization.

        ShortRoles which this practitioner may perform
        Comments

        A person may have more than one role.

        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from For example codes, see US Core Provider Role (NUCC)http://hl7.org/fhir/ValueSet/practitioner-role
        (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-provider-role)

        Provider role codes consisting of NUCC Health Care Provider Taxonomy Code Set for providers.


        The role a person plays representing an organization.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Need to know what authority the practitioner has - what can they do?

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. PractitionerRole.specialty
        Definition

        Specific specialty of the practitioner.

        ShortSpecific specialty of the practitioner
        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from Healthcare Provider Taxonomy .http://hl7.org/fhir/ValueSet/c80-practice-codes
        (extensible to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.114222.4.11.1066)
        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. PractitionerRole.location
        Definition

        The location(s) at which this practitioner provides care.

        ShortThe location(s) at which this practitioner provides care
        Control0..*
        This element is affected by the following invariants: us-core-13
        TypeReference(US Public Health Location, Location)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. PractitionerRole.telecom
        Definition

        Contact details that are specific to the role/location/service.

        ShortContact details that are specific to the role/location/service
        Control10..*
        This element is affected by the following invariants: pd-1
        TypeContactPoint
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        eicr-anon-prctrl-tel: PracitionerRole.telecom.value.value SHALL NOT be present (value.value.empty())
        36. PractitionerRole.telecom.system
        Definition

        Telecommunications form for contact point - what communications system is required to make use of the contact.

        Shortphone | fax | email | pager | url | sms | other
        Control10..1
        This element is affected by the following invariants: cpt-2
        BindingThe codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|4.0.1
        (required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1)

        Telecommunications form for contact point.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. PractitionerRole.telecom.value
        Definition

        The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

        ShortThe actual contact point details
        Comments

        Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Need to support legacy numbers that are not in a tightly controlled format.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. PractitionerRole.telecom.value.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control10..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on PractitionerRole.telecom.value.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 42. PractitionerRole.telecom.value.extension:dataAbsentReason
          Slice NamedataAbsentReason
          Definition

          Provides a reason why the expected value or elements in the element that is extended are missing.

          ShortA value for telecom.value is not allowed, must use data-absent-reason with value 'masked'
          Control1..1
          TypeExtension(Data Absent Reason) (Extension Type: code)
          Is Modifierfalse
          Must Supporttrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          44. PractitionerRole.telecom.value.extension:dataAbsentReason.extension
          Definition

          An Extension


          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortExtensionAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..0*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on PractitionerRole.telecom.value.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 46. PractitionerRole.telecom.value.extension:dataAbsentReason.url
            Definition

            Source of the definition for the extension code - a logical name or a URL.

            Shortidentifies the meaning of the extension
            Comments

            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

            Control1..1
            Typeuri
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            Fixed Valuehttp://hl7.org/fhir/StructureDefinition/data-absent-reason
            48. PractitionerRole.telecom.value.extension:dataAbsentReason.value[x]
            Definition

            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

            ShortValue of extension
            Control10..1
            This element is affected by the following invariants: ext-1
            BindingThe codes SHALL be taken from For codes, see DataAbsentReason
            (required to http://hl7.org/fhir/ValueSet/data-absent-reason)
            Typecode, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Fixed Valuemasked
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            50. PractitionerRole.telecom.use
            Definition

            Identifies the purpose for the contact point.

            Shorthome | work | temp | old | mobile - purpose of this contact point
            Comments

            Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

            Control0..1
            BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
            (required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1)

            Use of contact point.

            Typecode
            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            52. PractitionerRole.endpoint
            Definition

            Technical endpoints providing access to services operated for the practitioner with this role.

            ShortTechnical endpoints providing access to services operated for the practitioner with this role
            Control0..*
            This element is affected by the following invariants: pd-1
            TypeReference(Endpoint)
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Organizations have multiple systems that provide various services and ,ay also be different for practitioners too.

            So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

            Guidance on how to interpret the contents of this table can be found here

            0. PractitionerRole
            Definition

            This is basic constraint on PractitionerRole for use in US Core resources.

            ShortUS Public Health PracitionerRole
            Control0..*
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
            dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
            dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
            dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
            dom-6: A resource should have narrative for robust management (text.`div`.exists())
            pd-1: SHALL have contact information or a reference to an Endpoint (telecom or endpoint)
            us-core-13: SHALL have a practitioner, an organization, a healthcare service, or a location. (practitioner or organization or healthcareService or location)
            2. PractitionerRole.id
            Definition

            The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

            ShortLogical id of this artifact
            Comments

            The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

            Control0..1
            Typeid
            Is Modifierfalse
            Summarytrue
            4. PractitionerRole.meta
            Definition

            The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

            ShortMetadata about the resource
            Control0..1
            TypeMeta
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            6. PractitionerRole.implicitRules
            Definition

            A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

            ShortA set of rules under which this content was created
            Comments

            Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

            Control0..1
            Typeuri
            Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            8. PractitionerRole.language
            Definition

            The base language in which the resource is written.

            ShortLanguage of the resource content
            Comments

            Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

            Control0..1
            BindingThe codes SHOULD be taken from CommonLanguages
            (preferred to http://hl7.org/fhir/ValueSet/languages)

            A human language.

            Additional BindingsPurpose
            AllLanguagesMax Binding
            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            10. PractitionerRole.text
            Definition

            A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

            ShortText summary of the resource, for human interpretation
            Comments

            Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

            Control0..1
            TypeNarrative
            Is Modifierfalse
            Summaryfalse
            Alternate Namesnarrative, html, xhtml, display
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            eicr-anon-text: text.div SHALL be '<div xmlns="http://www.w3.org/1999/xhtml"><p>MASKED</p></div>' (exists() implies `div`.toString().matches('<div xmlns="http://www.w3.org/1999/xhtml">\\s*<p>MASKED</p>\\s*</div>'))
            12. PractitionerRole.text.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            14. PractitionerRole.text.extension
            Definition

            An Extension

            ShortExtension
            Control1..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on PractitionerRole.text.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 16. PractitionerRole.text.extension:dataAbsentReason
              Slice NamedataAbsentReason
              Definition

              Provides a reason why the expected value or elements in the element that is extended are missing.

              ShortUse data-absent-reason with value 'masked'
              Control1..1
              TypeExtension(Data Absent Reason) (Extension Type: code)
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              18. PractitionerRole.text.extension:dataAbsentReason.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              This element is affected by the following invariants: ele-1
              Typeid
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              20. PractitionerRole.text.extension:dataAbsentReason.extension
              Definition

              An Extension

              ShortExtension
              Control0..0
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on PractitionerRole.text.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 22. PractitionerRole.text.extension:dataAbsentReason.url
                Definition

                Source of the definition for the extension code - a logical name or a URL.

                Shortidentifies the meaning of the extension
                Comments

                The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                Control1..1
                Typeuri
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                Fixed Valuehttp://hl7.org/fhir/StructureDefinition/data-absent-reason
                24. PractitionerRole.text.extension:dataAbsentReason.value[x]
                Definition

                Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                ShortValue of extension
                Control1..1
                This element is affected by the following invariants: ext-1
                BindingThe codes SHALL be taken from DataAbsentReason
                (required to http://hl7.org/fhir/ValueSet/data-absent-reason)
                Typecode
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Fixed Valuemasked
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                26. PractitionerRole.text.status
                Definition

                The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data.

                Shortgenerated | extensions | additional | empty
                Control1..1
                BindingThe codes SHALL be taken from NarrativeStatus
                (required to http://hl7.org/fhir/ValueSet/narrative-status|4.0.1)

                The status of a resource narrative.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. PractitionerRole.text.div
                Definition

                The actual narrative content, a stripped down version of XHTML.

                ShortSet to '<div xmlns="http://www.w3.org/1999/xhtml"><p>MASKED</p></div>'
                Comments

                The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.

                Control1..1
                Typexhtml
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                txt-1: The narrative SHALL contain only the basic html formatting elements and attributes described in chapters 7-11 (except section 4 of chapter 9) and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained style attributes (htmlChecks())
                txt-2: The narrative SHALL have some non-whitespace content (htmlChecks())
                30. PractitionerRole.contained
                Definition

                These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                ShortContained, inline Resources
                Comments

                This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                Control0..*
                TypeResource
                Is Modifierfalse
                Summaryfalse
                Alternate Namesinline resources, anonymous resources, contained resources
                32. PractitionerRole.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                34. PractitionerRole.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                Summaryfalse
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                36. PractitionerRole.identifier
                Definition

                Business Identifiers that are specific to a role/location.

                ShortBusiness Identifiers that are specific to a role/location
                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control1..1
                TypeIdentifier
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Often, specific identities are assigned for the agent.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                38. PractitionerRole.active
                Definition

                Whether this practitioner role record is in active use.

                ShortWhether this practitioner role record is in active use
                Comments

                If this value is false, you may refer to the period to see when the role was in active use. If there is no period specified, no inference can be made about when it was active.

                Control0..1
                Typeboolean
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Need to be able to mark a practitioner role record as not to be used because it was created in error, or otherwise no longer in active use.

                Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                40. PractitionerRole.period
                Definition

                The period during which the person is authorized to act as a practitioner in these role(s) for the organization.

                ShortThe period during which the practitioner is authorized to perform in these role(s)
                Control0..1
                TypePeriod
                Is Modifierfalse
                Summarytrue
                Requirements

                Even after the agencies is revoked, the fact that it existed must still be recorded.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                42. PractitionerRole.practitioner
                Definition

                Practitioner that is able to provide the defined services for the organization.

                ShortPractitioner that is able to provide the defined services for the organization
                Control1..1
                This element is affected by the following invariants: us-core-13
                TypeReference(eICR Anonymized Practitioner)
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                44. PractitionerRole.organization
                Definition

                The organization where the Practitioner performs the roles associated.

                ShortOrganization where the roles are available
                Control0..1
                This element is affected by the following invariants: us-core-13
                TypeReference(US Public Health Organization)
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                46. PractitionerRole.code
                Definition

                Roles which this practitioner is authorized to perform for the organization.

                ShortRoles which this practitioner may perform
                Comments

                A person may have more than one role.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from US Core Provider Role (NUCC)
                (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-provider-role)

                Provider role codes consisting of NUCC Health Care Provider Taxonomy Code Set for providers.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Need to know what authority the practitioner has - what can they do?

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                48. PractitionerRole.specialty
                Definition

                Specific specialty of the practitioner.

                ShortSpecific specialty of the practitioner
                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from Healthcare Provider Taxonomy .
                (extensible to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.114222.4.11.1066)
                TypeCodeableConcept
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                50. PractitionerRole.location
                Definition

                The location(s) at which this practitioner provides care.

                ShortThe location(s) at which this practitioner provides care
                Control0..*
                This element is affected by the following invariants: us-core-13
                TypeReference(US Public Health Location)
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                52. PractitionerRole.healthcareService
                Definition

                The list of healthcare services that this worker provides for this role's Organization/Location(s).

                ShortThe list of healthcare services that this worker provides for this role's Organization/Location(s)
                Control0..*
                This element is affected by the following invariants: us-core-13
                TypeReference(HealthcareService)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                54. PractitionerRole.telecom
                Definition

                Contact details that are specific to the role/location/service.

                ShortContact details that are specific to the role/location/service
                Control1..*
                This element is affected by the following invariants: pd-1
                TypeContactPoint
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                eicr-anon-prctrl-tel: PracitionerRole.telecom.value.value SHALL NOT be present (value.value.empty())
                56. PractitionerRole.telecom.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                58. PractitionerRole.telecom.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on PractitionerRole.telecom.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 60. PractitionerRole.telecom.system
                  Definition

                  Telecommunications form for contact point - what communications system is required to make use of the contact.

                  Shortphone | fax | email | pager | url | sms | other
                  Control1..1
                  This element is affected by the following invariants: cpt-2
                  BindingThe codes SHALL be taken from ContactPointSystem
                  (required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1)

                  Telecommunications form for contact point.

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  62. PractitionerRole.telecom.value
                  Definition

                  The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

                  ShortThe actual contact point details
                  Comments

                  Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

                  Control1..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Need to support legacy numbers that are not in a tightly controlled format.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  64. PractitionerRole.telecom.value.id
                  Definition

                  unique id for the element within a resource (for internal references)

                  Shortxml:id (or equivalent in JSON)
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  66. PractitionerRole.telecom.value.extension
                  Definition

                  An Extension

                  ShortExtension
                  Control1..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on PractitionerRole.telecom.value.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 68. PractitionerRole.telecom.value.extension:dataAbsentReason
                    Slice NamedataAbsentReason
                    Definition

                    Provides a reason why the expected value or elements in the element that is extended are missing.

                    ShortA value for telecom.value is not allowed, must use data-absent-reason with value 'masked'
                    Control1..1
                    TypeExtension(Data Absent Reason) (Extension Type: code)
                    Is Modifierfalse
                    Must Supporttrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    70. PractitionerRole.telecom.value.extension:dataAbsentReason.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typeid
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    72. PractitionerRole.telecom.value.extension:dataAbsentReason.extension
                    Definition

                    An Extension

                    ShortExtension
                    Control0..0
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on PractitionerRole.telecom.value.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 74. PractitionerRole.telecom.value.extension:dataAbsentReason.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      Fixed Valuehttp://hl7.org/fhir/StructureDefinition/data-absent-reason
                      76. PractitionerRole.telecom.value.extension:dataAbsentReason.value[x]
                      Definition

                      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                      ShortValue of extension
                      Control1..1
                      This element is affected by the following invariants: ext-1
                      BindingThe codes SHALL be taken from DataAbsentReason
                      (required to http://hl7.org/fhir/ValueSet/data-absent-reason)
                      Typecode
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Fixed Valuemasked
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      78. PractitionerRole.telecom.value.value
                      Definition

                      The actual value

                      ShortPrimitive value for string
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      Max Length:1048576
                      80. PractitionerRole.telecom.use
                      Definition

                      Identifies the purpose for the contact point.

                      Shorthome | work | temp | old | mobile - purpose of this contact point
                      Comments

                      Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

                      Control0..1
                      BindingThe codes SHALL be taken from ContactPointUse
                      (required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1)

                      Use of contact point.

                      Typecode
                      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      82. PractitionerRole.telecom.rank
                      Definition

                      Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

                      ShortSpecify preferred order of use (1 = highest)
                      Comments

                      Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

                      Control0..1
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      84. PractitionerRole.telecom.period
                      Definition

                      Time period when the contact point was/is in use.

                      ShortTime period when the contact point was/is in use
                      Control0..1
                      TypePeriod
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      86. PractitionerRole.availableTime
                      Definition

                      A collection of times the practitioner is available or performing this role at the location and/or healthcareservice.

                      ShortTimes the Service Site is available
                      Comments

                      More detailed availability information may be provided in associated Schedule/Slot resources.

                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      88. PractitionerRole.availableTime.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      90. PractitionerRole.availableTime.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      92. PractitionerRole.availableTime.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      94. PractitionerRole.availableTime.daysOfWeek
                      Definition

                      Indicates which days of the week are available between the start and end Times.

                      Shortmon | tue | wed | thu | fri | sat | sun
                      Control0..*
                      BindingThe codes SHALL be taken from DaysOfWeek
                      (required to http://hl7.org/fhir/ValueSet/days-of-week|4.0.1)

                      The days of the week.

                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      96. PractitionerRole.availableTime.allDay
                      Definition

                      Is this always available? (hence times are irrelevant) e.g. 24 hour service.

                      ShortAlways available? e.g. 24 hour service
                      Control0..1
                      Typeboolean
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      98. PractitionerRole.availableTime.availableStartTime
                      Definition

                      The opening time of day. Note: If the AllDay flag is set, then this time is ignored.

                      ShortOpening time of day (ignored if allDay = true)
                      Comments

                      The timezone is expected to be for where this HealthcareService is provided at.

                      Control0..1
                      Typetime
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      100. PractitionerRole.availableTime.availableEndTime
                      Definition

                      The closing time of day. Note: If the AllDay flag is set, then this time is ignored.

                      ShortClosing time of day (ignored if allDay = true)
                      Comments

                      The timezone is expected to be for where this HealthcareService is provided at.

                      Control0..1
                      Typetime
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      102. PractitionerRole.notAvailable
                      Definition

                      The practitioner is not available or performing this role during this period of time due to the provided reason.

                      ShortNot available during this time due to provided reason
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      104. PractitionerRole.notAvailable.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      106. PractitionerRole.notAvailable.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      108. PractitionerRole.notAvailable.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      110. PractitionerRole.notAvailable.description
                      Definition

                      The reason that can be presented to the user as to why this time is not available.

                      ShortReason presented to the user explaining why time not available
                      Control1..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      112. PractitionerRole.notAvailable.during
                      Definition

                      Service is not available (seasonally or for a public holiday) from this date.

                      ShortService not available from this date
                      Control0..1
                      TypePeriod
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      114. PractitionerRole.availabilityExceptions
                      Definition

                      A description of site availability exceptions, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as details in the available Times and not available Times.

                      ShortDescription of availability exceptions
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      116. PractitionerRole.endpoint
                      Definition

                      Technical endpoints providing access to services operated for the practitioner with this role.

                      ShortTechnical endpoints providing access to services operated for the practitioner with this role
                      Control0..*
                      This element is affected by the following invariants: pd-1
                      TypeReference(Endpoint)
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Requirements

                      Organizations have multiple systems that provide various services and ,ay also be different for practitioners too.

                      So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))