CH ALIS Extension ServiceAssignment - CH ALIS Connect (R4) v1.0.0-ballot

CH ALIS Connect (R4), published by ALIS-Connect. This guide is not an authorized publication; it is the continuous build for version 1.0.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/hl7ch/ch-alis-connect/ and changes regularly. See the Directory of published versions

Extension: CH ALIS Extension ServiceAssignment - Detailed Descriptions

Active as of 2026-10-17

Definitions for the ch-alis-connect-ext-serviceassignment extension

Key Elements Table
Differential Table
Snapshot Table

See the documentation on how to interpret the contents of this table

0. Extension
Definition	This extension describes ServiceAssignment Optional Extension Element - found in all resources.
Short	CH ALIS Extension ServiceAssignmentOptional Extensions Element
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension:OrderingProviderID
Slice Name	OrderingProviderID
Definition	An Extension
Short	OrderingProviderIDAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
4. Extension.extension:OrderingProviderID.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
6. Extension.extension:OrderingProviderID.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "OrderingProviderID" }` `<url value="OrderingProviderID"/>`
8. Extension.extension:OrderingProviderID.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1
Type	Identifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
10. Extension.extension:OrderingProviderID.value[x]:valueIdentifier
Slice Name	valueIdentifier
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	OrderingProviderIDValue of extension
Comments	ALIS OrderingProviderID: GLN or local ID of the ordering provider. A GLN is sent with identifier.system = urn:oid:2.51.1.3, a local ID with the identifier system of the sender.
Control	10..1
Type	Identifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.use
Definition	The purpose of this identifier.
Short	usual \| official \| temp \| secondary \| old (If known)
Comments	Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Control	0..1
Binding	The codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use\|4.0.1 (required to `http://hl7.org/fhir/ValueSet/identifier-use\|4.0.1`) Identifies the purpose for this identifier, if known .
Type	code
Is Modifier	true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Requirements	Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.value
Definition	The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Short	The value that is unique
Comments	If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Control	10..1
Type	string
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Example	General: 123456
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Extension.extension:OrderSectionCode
Slice Name	OrderSectionCode
Definition	An Extension
Short	OrderSectionCodeAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Extension.extension:OrderSectionCode.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
20. Extension.extension:OrderSectionCode.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "OrderSectionCode" }` `<url value="OrderSectionCode"/>`
22. Extension.extension:OrderSectionCode.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1
Type	Coding, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
24. Extension.extension:OrderSectionCode.value[x]:valueCoding
Slice Name	valueCoding
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1
Binding	Unless not suitable, these codes SHALL be taken from For codes, see SwissMedicalSpecialities (extensible to `http://fhir.ch/ig/ch-alis-connect/ValueSet/SwissMedicalSpecialities`) Extensible: the SwissMedicalSpecialities CodeSystem is a fragment of the 'Reglement Fachbereiche inkl. Liste der Fachbereiche' and only lists the codes referenced in this guide. Other codes from the Reglement Fachbereiche may be used.
Type	Coding, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Extension.extension:OrderDate
Slice Name	OrderDate
Definition	An Extension
Short	OrderDateAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Extension.extension:OrderDate.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
30. Extension.extension:OrderDate.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "OrderDate" }` `<url value="OrderDate"/>`
32. Extension.extension:OrderDate.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1
Type	dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
34. Extension.extension:OrderDate.value[x]:valueDateTime
Slice Name	valueDateTime
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	OrderDateValue of extension
Control	10..1
Type	dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Extension.extension:FollowUpOrder
Slice Name	FollowUpOrder
Definition	An Extension
Short	FollowUpOrderAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Extension.extension:FollowUpOrder.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
40. Extension.extension:FollowUpOrder.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "FollowUpOrder" }` `<url value="FollowUpOrder"/>`
42. Extension.extension:FollowUpOrder.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1
Type	boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
44. Extension.extension:FollowUpOrder.value[x]:valueBoolean
Slice Name	valueBoolean
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	FollowUpOrderValue of extension
Control	10..1
Type	boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "http://fhir.ch/ig/ch-alis-connect/StructureDefinition/ch-alis-connect-ext-serviceassignment" }` `<url value="http://fhir.ch/ig/ch-alis-connect/StructureDefinition/ch-alis-connect-ext-serviceassignment"/>`
48. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

See the documentation on how to interpret the contents of this table

0. Extension
Definition	This extension describes ServiceAssignment
Short	CH ALIS Extension ServiceAssignment
2. Extension.extension:OrderingProviderID
Slice Name	OrderingProviderID
Short	OrderingProviderID
Control	0..1
4. Extension.extension:OrderingProviderID.extension
Control	0..0
6. Extension.extension:OrderingProviderID.url
Fixed Value	`{ "url" : "OrderingProviderID" }` `<url value="OrderingProviderID"/>`
8. Extension.extension:OrderingProviderID.value[x]
Control	1..?
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Open, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
10. Extension.extension:OrderingProviderID.value[x]:valueIdentifier
Slice Name	valueIdentifier
Short	OrderingProviderID
Comments	ALIS OrderingProviderID: GLN or local ID of the ordering provider. A GLN is sent with identifier.system = urn:oid:2.51.1.3, a local ID with the identifier system of the sender.
Control	1..1
Type	Identifier
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
12. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.value
Control	1..?
14. Extension.extension:OrderSectionCode
Slice Name	OrderSectionCode
Short	OrderSectionCode
Control	0..1
16. Extension.extension:OrderSectionCode.extension
Control	0..0
18. Extension.extension:OrderSectionCode.url
Fixed Value	`{ "url" : "OrderSectionCode" }` `<url value="OrderSectionCode"/>`
20. Extension.extension:OrderSectionCode.value[x]
Control	1..?
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Open, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
22. Extension.extension:OrderSectionCode.value[x]:valueCoding
Slice Name	valueCoding
Control	1..1
Binding	Unless not suitable, these codes SHALL be taken from SwissMedicalSpecialities (extensible to `http://fhir.ch/ig/ch-alis-connect/ValueSet/SwissMedicalSpecialities`) Extensible: the SwissMedicalSpecialities CodeSystem is a fragment of the 'Reglement Fachbereiche inkl. Liste der Fachbereiche' and only lists the codes referenced in this guide. Other codes from the Reglement Fachbereiche may be used.
Type	Coding
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
24. Extension.extension:OrderDate
Slice Name	OrderDate
Short	OrderDate
Control	0..1
26. Extension.extension:OrderDate.extension
Control	0..0
28. Extension.extension:OrderDate.url
Fixed Value	`{ "url" : "OrderDate" }` `<url value="OrderDate"/>`
30. Extension.extension:OrderDate.value[x]
Control	1..?
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Open, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
32. Extension.extension:OrderDate.value[x]:valueDateTime
Slice Name	valueDateTime
Short	OrderDate
Control	1..1
Type	dateTime
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
34. Extension.extension:FollowUpOrder
Slice Name	FollowUpOrder
Short	FollowUpOrder
Control	0..1
36. Extension.extension:FollowUpOrder.extension
Control	0..0
38. Extension.extension:FollowUpOrder.url
Fixed Value	`{ "url" : "FollowUpOrder" }` `<url value="FollowUpOrder"/>`
40. Extension.extension:FollowUpOrder.value[x]
Control	1..?
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Open, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
42. Extension.extension:FollowUpOrder.value[x]:valueBoolean
Slice Name	valueBoolean
Short	FollowUpOrder
Control	1..1
Type	boolean
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
44. Extension.url
Fixed Value	`{ "url" : "http://fhir.ch/ig/ch-alis-connect/StructureDefinition/ch-alis-connect-ext-serviceassignment" }` `<url value="http://fhir.ch/ig/ch-alis-connect/StructureDefinition/ch-alis-connect-ext-serviceassignment"/>`
46. Extension.value[x]
Control	0..0

See the documentation on how to interpret the contents of this table

0. Extension
Definition	This extension describes ServiceAssignment
Short	CH ALIS Extension ServiceAssignment
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:OrderingProviderID
Slice Name	OrderingProviderID
Definition	An Extension
Short	OrderingProviderID
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:OrderingProviderID.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:OrderingProviderID.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
12. Extension.extension:OrderingProviderID.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "OrderingProviderID" }` `<url value="OrderingProviderID"/>`
14. Extension.extension:OrderingProviderID.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1
Type	Identifier
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
16. Extension.extension:OrderingProviderID.value[x]:valueIdentifier
Slice Name	valueIdentifier
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	OrderingProviderID
Comments	ALIS OrderingProviderID: GLN or local ID of the ordering provider. A GLN is sent with identifier.system = urn:oid:2.51.1.3, a local ID with the identifier system of the sender.
Control	1..1
Type	Identifier
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
18. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
20. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.value[x].extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.use
Definition	The purpose of this identifier.
Short	usual \| official \| temp \| secondary \| old (If known)
Comments	Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Control	0..1
Binding	The codes SHALL be taken from IdentifierUse (required to `http://hl7.org/fhir/ValueSet/identifier-use\|4.0.1`) Identifies the purpose for this identifier, if known .
Type	code
Is Modifier	true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Requirements	Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
24. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.type
Definition	A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Short	Description of identifier
Comments	This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from Identifier Type Codes (extensible to `http://hl7.org/fhir/ValueSet/identifier-type\|4.0.1`) A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
Type	CodeableConcept
Is Modifier	false
Summary	true
Requirements	Allows users to make use of identifiers when the identifier system is not known.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.system
Definition	Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Short	The namespace for the identifier value
Comments	Identifier.system is always case sensitive.
Control	0..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Requirements	There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Example	General: http://www.acme.com/identifiers/patient
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
28. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.value
Definition	The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Short	The value that is unique
Comments	If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Control	1..1
Type	string
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Example	General: 123456
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
30. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.period
Definition	Time period during which identifier is/was valid for use.
Short	Time period when id is/was valid for use
Control	0..1
Type	Period
Is Modifier	false
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
32. Extension.extension:OrderingProviderID.value[x]:valueIdentifier.assigner
Definition	Organization that issued/manages the identifier.
Short	Organization that issued id (may be just text)
Comments	The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Control	0..1
Type	Reference(Organization)
Is Modifier	false
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
34. Extension.extension:OrderSectionCode
Slice Name	OrderSectionCode
Definition	An Extension
Short	OrderSectionCode
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
36. Extension.extension:OrderSectionCode.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
38. Extension.extension:OrderSectionCode.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
40. Extension.extension:OrderSectionCode.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "OrderSectionCode" }` `<url value="OrderSectionCode"/>`
42. Extension.extension:OrderSectionCode.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1
Type	Coding
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
44. Extension.extension:OrderSectionCode.value[x]:valueCoding
Slice Name	valueCoding
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1
Binding	Unless not suitable, these codes SHALL be taken from SwissMedicalSpecialities (extensible to `http://fhir.ch/ig/ch-alis-connect/ValueSet/SwissMedicalSpecialities`) Extensible: the SwissMedicalSpecialities CodeSystem is a fragment of the 'Reglement Fachbereiche inkl. Liste der Fachbereiche' and only lists the codes referenced in this guide. Other codes from the Reglement Fachbereiche may be used.
Type	Coding
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
46. Extension.extension:OrderDate
Slice Name	OrderDate
Definition	An Extension
Short	OrderDate
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Extension.extension:OrderDate.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
50. Extension.extension:OrderDate.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
52. Extension.extension:OrderDate.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "OrderDate" }` `<url value="OrderDate"/>`
54. Extension.extension:OrderDate.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1
Type	dateTime
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
56. Extension.extension:OrderDate.value[x]:valueDateTime
Slice Name	valueDateTime
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	OrderDate
Control	1..1
Type	dateTime
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
58. Extension.extension:FollowUpOrder
Slice Name	FollowUpOrder
Definition	An Extension
Short	FollowUpOrder
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
60. Extension.extension:FollowUpOrder.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
62. Extension.extension:FollowUpOrder.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
64. Extension.extension:FollowUpOrder.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "FollowUpOrder" }` `<url value="FollowUpOrder"/>`
66. Extension.extension:FollowUpOrder.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1
Type	boolean
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
Slicing	This element introduces a set of slices on `Extension.extension.value[x]`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: type @ $this Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
68. Extension.extension:FollowUpOrder.value[x]:valueBoolean
Slice Name	valueBoolean
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	FollowUpOrder
Control	1..1
Type	boolean
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
70. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "http://fhir.ch/ig/ch-alis-connect/StructureDefinition/ch-alis-connect-ext-serviceassignment" }` `<url value="http://fhir.ch/ig/ch-alis-connect/StructureDefinition/ch-alis-connect-ext-serviceassignment"/>`
72. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)