PTAddressNuts - Definitions - HL7 PT FHIR Implementation Guide: Example IG Release 1

HL7 PT FHIR Implementation Guide: Example IG Release 1 | STU1, publicado por HL7 Portugal. Este guia não é uma publicação autorizada; é a compilação contínua para a versão 1.0.0 construída pela FHIR (HL7® FHIR® Standard) CI Build. Esta versão é baseada no conteúdo atual de https://github.com/hl7-pt/patient-admin-ig/ e muda regularmente. Veja o Diretório de versões publicadas

Extension: PTAddressNuts - Detailed Descriptions

Active as of 2025-12-18

Definitions for the AddressNuts-Pt extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Instruções sobre como interpretar o conteúdo desta tabela podem ser encontradashere

0. Extension
Definição	An Extension Optional Extension Element - found in all resources.
Curto	ExtensionOptional Extensions Element
Controlo	0..* Este elemento é afetado pelas seguintes invariantes: ele-1
É modificador	false
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension:nuts-I
Nome da fatia	nuts-I
Definição	An Extension
Curto	ExtensionAdditional content defined by implementations
Controlo	0..*
Tipo	Extension
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
4. Extension.extension:nuts-I.extension
Definição	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Curto	ExtensionAdditional content defined by implementations
Comentários	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Controlo	0..0*
Tipo	Extension
É modificador	false
Resumo	false
Nomes alternativos	extensions, user content
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	Este elemento introduz um conjunto de fatias em `Extension.extension.extension`. As fatias sãoNão ordenado e Opene pode ser diferenciado utilizando os seguintes discriminadores: value @ url
6. Extension.extension:nuts-I.url
Definição	Source of the definition for the extension code - a logical name or a URL.
Curto	identifies the meaning of the extension
Comentários	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Controlo	1..1
Tipo	uri
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
Valor fixo	`nuts-I`
8. Extension.extension:nuts-I.value[x]
Definição	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Curto	Value of extension
Controlo	0..1
Tipo	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Nota	VerEscolha de tipos de dadospara mais informações sobre como utilizar [x]
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Extension.extension:nuts-II
Nome da fatia	nuts-II
Definição	An Extension
Curto	ExtensionAdditional content defined by implementations
Controlo	0..*
Tipo	Extension
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Extension.extension:nuts-II.extension
Definição	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Curto	ExtensionAdditional content defined by implementations
Comentários	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Controlo	0..0*
Tipo	Extension
É modificador	false
Resumo	false
Nomes alternativos	extensions, user content
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	Este elemento introduz um conjunto de fatias em `Extension.extension.extension`. As fatias sãoNão ordenado e Opene pode ser diferenciado utilizando os seguintes discriminadores: value @ url
14. Extension.extension:nuts-II.url
Definição	Source of the definition for the extension code - a logical name or a URL.
Curto	identifies the meaning of the extension
Comentários	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Controlo	1..1
Tipo	uri
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
Valor fixo	`nuts-II`
16. Extension.extension:nuts-II.value[x]
Definição	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Curto	Value of extension
Controlo	0..1
Tipo	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Nota	VerEscolha de tipos de dadospara mais informações sobre como utilizar [x]
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Extension.extension:nuts-III
Nome da fatia	nuts-III
Definição	An Extension
Curto	ExtensionAdditional content defined by implementations
Controlo	0..*
Tipo	Extension
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Extension.extension:nuts-III.extension
Definição	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Curto	ExtensionAdditional content defined by implementations
Comentários	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Controlo	0..0*
Tipo	Extension
É modificador	false
Resumo	false
Nomes alternativos	extensions, user content
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	Este elemento introduz um conjunto de fatias em `Extension.extension.extension`. As fatias sãoNão ordenado e Opene pode ser diferenciado utilizando os seguintes discriminadores: value @ url
22. Extension.extension:nuts-III.url
Definição	Source of the definition for the extension code - a logical name or a URL.
Curto	identifies the meaning of the extension
Comentários	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Controlo	1..1
Tipo	uri
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
Valor fixo	`nuts-III`
24. Extension.extension:nuts-III.value[x]
Definição	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Curto	Value of extension
Controlo	0..1
Tipo	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Nota	VerEscolha de tipos de dadospara mais informações sobre como utilizar [x]
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Extension.url
Definição	Source of the definition for the extension code - a logical name or a URL.
Curto	identifies the meaning of the extension
Comentários	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Controlo	1..1
Tipo	uri
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
Valor fixo	`http://example.com/fhir/hl7pt/StructureDefinition/AddressNuts-Pt`
28. Extension.value[x]
Definição	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Curto	Value of extension
Controlo	0..01
Tipo	Escolha de: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
É modificador	false
Valor primitivo	Este elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Instruções sobre como interpretar o conteúdo desta tabela podem ser encontradashere

0. Extension
2. Extension.extension:nuts-I
Nome da fatia	nuts-I
Controlo	0..*
4. Extension.extension:nuts-I.extension
Controlo	0..0
6. Extension.extension:nuts-I.url
Valor fixo	`nuts-I`
8. Extension.extension:nuts-I.value[x]
Tipo	CodeableConcept
[x] Nota	VerEscolha de tipos de dadospara mais informações sobre como utilizar [x]
10. Extension.extension:nuts-II
Nome da fatia	nuts-II
Controlo	0..*
12. Extension.extension:nuts-II.extension
Controlo	0..0
14. Extension.extension:nuts-II.url
Valor fixo	`nuts-II`
16. Extension.extension:nuts-II.value[x]
Tipo	CodeableConcept
[x] Nota	VerEscolha de tipos de dadospara mais informações sobre como utilizar [x]
18. Extension.extension:nuts-III
Nome da fatia	nuts-III
Controlo	0..*
20. Extension.extension:nuts-III.extension
Controlo	0..0
22. Extension.extension:nuts-III.url
Valor fixo	`nuts-III`
24. Extension.extension:nuts-III.value[x]
Tipo	CodeableConcept
[x] Nota	VerEscolha de tipos de dadospara mais informações sobre como utilizar [x]
26. Extension.url
Valor fixo	`http://example.com/fhir/hl7pt/StructureDefinition/AddressNuts-Pt`
28. Extension.value[x]
Controlo	0..0

Instruções sobre como interpretar o conteúdo desta tabela podem ser encontradashere

0. Extension
Definição	An Extension
Curto	Extension
Controlo	0..* Este elemento é afetado pelas seguintes invariantes: ele-1
É modificador	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definição	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Curto	Unique id for inter-element referencing
Controlo	0..1
Tipo	string
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
4. Extension.extension
Definição	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Curto	Additional content defined by implementations
Comentários	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Controlo	0..*
Tipo	Extension
É modificador	false
Resumo	false
Nomes alternativos	extensions, user content
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	Este elemento introduz um conjunto de fatias em `Extension.extension`. As fatias sãoNão ordenado e Opene pode ser diferenciado utilizando os seguintes discriminadores: value @ url
6. Extension.extension:nuts-I
Nome da fatia	nuts-I
Definição	An Extension
Curto	Extension
Controlo	0..*
Tipo	Extension
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:nuts-I.id
Definição	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Curto	Unique id for inter-element referencing
Controlo	0..1
Tipo	string
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
10. Extension.extension:nuts-I.extension
Definição	An Extension
Curto	Extension
Controlo	0..0
Tipo	Extension
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	Este elemento introduz um conjunto de fatias em `Extension.extension.extension`. As fatias sãoNão ordenado e Opene pode ser diferenciado utilizando os seguintes discriminadores: value @ url
12. Extension.extension:nuts-I.url
Definição	Source of the definition for the extension code - a logical name or a URL.
Curto	identifies the meaning of the extension
Comentários	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Controlo	1..1
Tipo	uri
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
Valor fixo	`nuts-I`
14. Extension.extension:nuts-I.value[x]
Definição	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Curto	Value of extension
Controlo	0..1
Tipo	CodeableConcept
[x] Nota	VerEscolha de tipos de dadospara mais informações sobre como utilizar [x]
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
16. Extension.extension:nuts-II
Nome da fatia	nuts-II
Definição	An Extension
Curto	Extension
Controlo	0..*
Tipo	Extension
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Extension.extension:nuts-II.id
Definição	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Curto	Unique id for inter-element referencing
Controlo	0..1
Tipo	string
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
20. Extension.extension:nuts-II.extension
Definição	An Extension
Curto	Extension
Controlo	0..0
Tipo	Extension
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	Este elemento introduz um conjunto de fatias em `Extension.extension.extension`. As fatias sãoNão ordenado e Opene pode ser diferenciado utilizando os seguintes discriminadores: value @ url
22. Extension.extension:nuts-II.url
Definição	Source of the definition for the extension code - a logical name or a URL.
Curto	identifies the meaning of the extension
Comentários	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Controlo	1..1
Tipo	uri
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
Valor fixo	`nuts-II`
24. Extension.extension:nuts-II.value[x]
Definição	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Curto	Value of extension
Controlo	0..1
Tipo	CodeableConcept
[x] Nota	VerEscolha de tipos de dadospara mais informações sobre como utilizar [x]
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Extension.extension:nuts-III
Nome da fatia	nuts-III
Definição	An Extension
Curto	Extension
Controlo	0..*
Tipo	Extension
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Extension.extension:nuts-III.id
Definição	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Curto	Unique id for inter-element referencing
Controlo	0..1
Tipo	string
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
30. Extension.extension:nuts-III.extension
Definição	An Extension
Curto	Extension
Controlo	0..0
Tipo	Extension
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	Este elemento introduz um conjunto de fatias em `Extension.extension.extension`. As fatias sãoNão ordenado e Opene pode ser diferenciado utilizando os seguintes discriminadores: value @ url
32. Extension.extension:nuts-III.url
Definição	Source of the definition for the extension code - a logical name or a URL.
Curto	identifies the meaning of the extension
Comentários	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Controlo	1..1
Tipo	uri
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
Valor fixo	`nuts-III`
34. Extension.extension:nuts-III.value[x]
Definição	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Curto	Value of extension
Controlo	0..1
Tipo	CodeableConcept
[x] Nota	VerEscolha de tipos de dadospara mais informações sobre como utilizar [x]
É modificador	false
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. Extension.url
Definição	Source of the definition for the extension code - a logical name or a URL.
Curto	identifies the meaning of the extension
Comentários	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Controlo	1..1
Tipo	uri
É modificador	false
Formato XML	No formato XML, esta propriedade é representada como um atributo.
Resumo	false
Valor fixo	`http://example.com/fhir/hl7pt/StructureDefinition/AddressNuts-Pt`
38. Extension.value[x]
Definição	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Curto	Value of extension
Controlo	0..0
Tipo	Escolha de: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
É modificador	false
Valor primitivo	Este elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumo	false
Invariantes	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)