UnicomIG
0.1.0 - ci-build
UnicomIG, published by UNICOM. This guide is not an authorized publication; it is the continuous build for version 0.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/hl7-eu/unicom-ig/ and changes regularly. See the Directory of published versions
Draft as of 2024-10-11 |
Definitions for the TransitionAdministrableProductDefinition resource profile.
Guidance on how to interpret the contents of this table can be found here
0. AdministrableProductDefinition | |
2. AdministrableProductDefinition.identifier | |
Short | PhPID or other relevant identifier |
Note | This is a business identifier, not a resource identifier (see discussion) |
4. AdministrableProductDefinition.formOf | |
Short | Reference to the Medicinal Product |
Type | Reference(Processing Profile - Medicinal Product) |
6. AdministrableProductDefinition.administrableDoseForm | |
Definition | EMA IG 6.2 |
Short | Dose form of the administrable product (after preparing for administration) |
8. AdministrableProductDefinition.unitOfPresentation | |
Definition | EMA IG 6.3 |
Short | Unit of presentation of the administrable product (after preparing for administration). Not applicable for certain products/packaging. |
10. AdministrableProductDefinition.producedFrom | |
Short | References to manufactured items that are used in the preparation of this administrable product |
Type | Reference(Processing Profile - Manufactured Item) |
12. AdministrableProductDefinition.routeOfAdministration | |
Definition | EMA IG 6.6 |
Guidance on how to interpret the contents of this table can be found here
0. AdministrableProductDefinition | |
Definition | A medicinal product in the final form which is suitable for administering to a patient (after any mixing of multiple components, dissolution etc. has been performed). |
Short | A medicinal product in the final form, suitable for administration - after any mixing of multiple components |
Control | 0..* |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | Pharmaceutical Product |
Invariants | apd-1: RouteOfAdministration cannot be used when the 'formOf' product already uses MedicinalProductDefinition.route (and vice versa) (AdministrableProductDefinition.formOf.resolve().route.empty()) dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) |
2. AdministrableProductDefinition.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. AdministrableProductDefinition.contained | |
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning. |
Short | Contained, inline Resources |
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. |
Control | 0..* This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5 |
Type | Resource |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | inline resources, anonymous resources, contained resources |
6. AdministrableProductDefinition.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Must Support | false |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
8. AdministrableProductDefinition.identifier | |
Definition | An identifier for the administrable product. |
Short | PhPID or other relevant identifierAn identifier for the administrable product |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..* |
Type | Identifier |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. AdministrableProductDefinition.status | |
Definition | The status of this administrable product. Enables tracking the life-cycle of the content. |
Short | draft | active | retired | unknown |
Comments | Allows filtering of administrable products that are appropriate for use versus not. |
Control | 1..1 |
Binding | The codes SHALL be taken from PublicationStatushttp://hl7.org/fhir/ValueSet/publication-status|5.0.0 (required to http://hl7.org/fhir/ValueSet/publication-status|5.0.0 )The lifecycle status of an artifact. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. AdministrableProductDefinition.formOf | |
Definition | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product. If this administrable product describes the administration of a crushed tablet, the 'formOf' would be the product representing a distribution containing tablets and possibly also a cream. This is distinct from the 'producedFrom' which refers to the specific components of the product that are used in this preparation, rather than the product as a whole. |
Short | Reference to the Medicinal ProductReferences a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product |
Control | 0..* This element is affected by the following invariants: apd-1 |
Type | Reference(Processing Profile - Medicinal Product, MedicinalProductDefinition) |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. AdministrableProductDefinition.administrableDoseForm | |
Definition | EMA IG 6.2 The dose form of the final product after necessary reconstitution or processing. Contrasts to the manufactured dose form (see ManufacturedItemDefinition). If the manufactured form was 'powder for solution for injection', the administrable dose form could be 'solution for injection' (once mixed with another item having manufactured form 'solvent for solution for injection'). |
Short | Dose form of the administrable product (after preparing for administration)The dose form of the final product after necessary reconstitution or processing |
Control | 0..1 |
Binding | For example codes, see AdministrableDoseFormhttp://hl7.org/fhir/ValueSet/administrable-dose-form (example to http://hl7.org/fhir/ValueSet/administrable-dose-form )Dose form for a medication, in the form suitable for administering to the patient, after mixing, where necessary. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. AdministrableProductDefinition.unitOfPresentation | |
Definition | EMA IG 6.3 The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' (as in 'contains 100 mcg per puff'), or for a liquid - 'vial' (as in 'contains 5 ml per vial'). |
Short | Unit of presentation of the administrable product (after preparing for administration). Not applicable for certain products/packaging.The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' |
Control | 0..1 |
Binding | For example codes, see UnitOfPresentationhttp://hl7.org/fhir/ValueSet/unit-of-presentation (example to http://hl7.org/fhir/ValueSet/unit-of-presentation )The presentation type in which an administrable medicinal product is given to a patient. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. AdministrableProductDefinition.producedFrom | |
Definition | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form. In some cases, an administrable form might use all of the items from the overall product (or there might only be one item), while in other cases, an administrable form might use only a subset of the items available in the overall product. For example, an administrable form might involve combining a liquid and a powder available as part of an overall product, but not involve applying the also supplied cream. |
Short | References to manufactured items that are used in the preparation of this administrable productIndicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form |
Control | 0..* |
Type | Reference(Processing Profile - Manufactured Item, ManufacturedItemDefinition) |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. AdministrableProductDefinition.routeOfAdministration | |
Definition | EMA IG 6.6 The path by which the product is taken into or makes contact with the body. In some regions this is referred to as the licenced or approved route. RouteOfAdministration cannot be used when the 'formOf' product already uses MedicinalProductDefinition.route (and vice versa). |
Short | The path by which the product is taken into or makes contact with the body |
Control | 1..* |
Type | BackboneElement |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. AdministrableProductDefinition.routeOfAdministration.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
24. AdministrableProductDefinition.routeOfAdministration.code | |
Definition | Coded expression for the route. |
Short | Coded expression for the route |
Control | 1..1 |
Binding | For example codes, see SNOMEDCTRouteCodeshttp://hl7.org/fhir/ValueSet/route-codes (example to http://hl7.org/fhir/ValueSet/route-codes )A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. AdministrableProductDefinition | |
Definition | A medicinal product in the final form which is suitable for administering to a patient (after any mixing of multiple components, dissolution etc. has been performed). |
Short | A medicinal product in the final form, suitable for administration - after any mixing of multiple components |
Control | 0..* |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | Pharmaceutical Product |
Invariants | apd-1: RouteOfAdministration cannot be used when the 'formOf' product already uses MedicinalProductDefinition.route (and vice versa) (AdministrableProductDefinition.formOf.resolve().route.empty() )dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources ( contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() ) |
2. AdministrableProductDefinition.id | |
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. |
Short | Logical id of this artifact |
Comments | Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case. |
Control | 0..1 |
Type | id |
Is Modifier | false |
Must Support | false |
Summary | true |
4. AdministrableProductDefinition.meta | |
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. |
Short | Metadata about the resource |
Control | 0..1 |
Type | Meta |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
6. AdministrableProductDefinition.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
8. AdministrableProductDefinition.language | |
Definition | The base language in which the resource is written. |
Short | Language of the resource content |
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). |
Control | 0..1 |
Binding | The codes SHALL be taken from AllLanguages (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0 )IETF language tag for a human language |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
10. AdministrableProductDefinition.text | |
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. |
Short | Text summary of the resource, for human interpretation |
Comments | Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. |
Control | 0..1 This element is affected by the following invariants: dom-6 |
Type | Narrative |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | narrative, html, xhtml, display |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
12. AdministrableProductDefinition.contained | |
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning. |
Short | Contained, inline Resources |
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. |
Control | 0..* This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5 |
Type | Resource |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | inline resources, anonymous resources, contained resources |
14. AdministrableProductDefinition.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
16. AdministrableProductDefinition.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Must Support | false |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
18. AdministrableProductDefinition.identifier | |
Definition | An identifier for the administrable product. |
Short | PhPID or other relevant identifier |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..* |
Type | Identifier |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
20. AdministrableProductDefinition.status | |
Definition | The status of this administrable product. Enables tracking the life-cycle of the content. |
Short | draft | active | retired | unknown |
Comments | Allows filtering of administrable products that are appropriate for use versus not. |
Control | 1..1 |
Binding | The codes SHALL be taken from PublicationStatus (required to http://hl7.org/fhir/ValueSet/publication-status|5.0.0 )The lifecycle status of an artifact. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
22. AdministrableProductDefinition.formOf | |
Definition | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product. If this administrable product describes the administration of a crushed tablet, the 'formOf' would be the product representing a distribution containing tablets and possibly also a cream. This is distinct from the 'producedFrom' which refers to the specific components of the product that are used in this preparation, rather than the product as a whole. |
Short | Reference to the Medicinal Product |
Control | 0..* This element is affected by the following invariants: apd-1 |
Type | Reference(Processing Profile - Medicinal Product) |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
24. AdministrableProductDefinition.administrableDoseForm | |
Definition | EMA IG 6.2 |
Short | Dose form of the administrable product (after preparing for administration) |
Control | 0..1 |
Binding | For example codes, see AdministrableDoseForm (example to http://hl7.org/fhir/ValueSet/administrable-dose-form )Dose form for a medication, in the form suitable for administering to the patient, after mixing, where necessary. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
26. AdministrableProductDefinition.unitOfPresentation | |
Definition | EMA IG 6.3 |
Short | Unit of presentation of the administrable product (after preparing for administration). Not applicable for certain products/packaging. |
Control | 0..1 |
Binding | For example codes, see UnitOfPresentation (example to http://hl7.org/fhir/ValueSet/unit-of-presentation )The presentation type in which an administrable medicinal product is given to a patient. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
28. AdministrableProductDefinition.producedFrom | |
Definition | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form. In some cases, an administrable form might use all of the items from the overall product (or there might only be one item), while in other cases, an administrable form might use only a subset of the items available in the overall product. For example, an administrable form might involve combining a liquid and a powder available as part of an overall product, but not involve applying the also supplied cream. |
Short | References to manufactured items that are used in the preparation of this administrable product |
Control | 0..* |
Type | Reference(Processing Profile - Manufactured Item) |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
30. AdministrableProductDefinition.ingredient | |
Definition | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton (via AdministrableProductDefinition.producedFrom) to state which component items are used to make this, or using by incoming references from the Ingredient resource, to state in detail which substances exist within this. This element allows a basic coded ingredient to be used. |
Short | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton, or using by incoming references from the Ingredient resource |
Control | 0..* |
Binding | For example codes, see SNOMEDCTSubstanceCodes (example to http://hl7.org/fhir/ValueSet/substance-codes )This value set includes all substance codes from SNOMED CT - provided as an exemplar value set. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
32. AdministrableProductDefinition.device | |
Definition | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product. This is not intended for devices that are just co-packaged. |
Short | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product |
Control | 0..1 |
Type | Reference(DeviceDefinition) |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
34. AdministrableProductDefinition.description | |
Definition | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed. Intended to be used when the other structured properties of this resource are insufficient or cannot be supported. It is not intended to duplicate information already carried elswehere. |
Short | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed |
Control | 0..1 |
Type | markdown |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
36. AdministrableProductDefinition.property | |
Definition | Characteristics e.g. a product's onset of action. |
Short | Characteristics e.g. a product's onset of action |
Control | 0..* |
Type | BackboneElement |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
38. AdministrableProductDefinition.property.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
40. AdministrableProductDefinition.property.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
42. AdministrableProductDefinition.property.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
44. AdministrableProductDefinition.property.type | |
Definition | A code expressing the type of characteristic. |
Short | A code expressing the type of characteristic |
Control | 1..1 |
Binding | For example codes, see ProductCharacteristic (example to http://hl7.org/fhir/ValueSet/product-characteristic-codes )This value set includes all observable entity codes from SNOMED CT - provided as an exemplar value set. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
46. AdministrableProductDefinition.property.value[x] | |
Definition | A value for the characteristic. |
Short | A value for the characteristic |
Control | 0..1 |
Type | Choice of: CodeableConcept, Quantity, date, boolean, markdown, Attachment, Reference(Binary) |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
48. AdministrableProductDefinition.property.status | |
Definition | The status of characteristic e.g. assigned or pending. |
Short | The status of characteristic e.g. assigned or pending |
Control | 0..1 |
Binding | The codes SHALL be taken from PublicationStatus (required to http://hl7.org/fhir/ValueSet/publication-status|5.0.0 )The lifecycle status of an artifact. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
50. AdministrableProductDefinition.routeOfAdministration | |
Definition | EMA IG 6.6 |
Short | The path by which the product is taken into or makes contact with the body |
Control | 1..* |
Type | BackboneElement |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
52. AdministrableProductDefinition.routeOfAdministration.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
54. AdministrableProductDefinition.routeOfAdministration.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
56. AdministrableProductDefinition.routeOfAdministration.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
58. AdministrableProductDefinition.routeOfAdministration.code | |
Definition | Coded expression for the route. |
Short | Coded expression for the route |
Control | 1..1 |
Binding | For example codes, see SNOMEDCTRouteCodes (example to http://hl7.org/fhir/ValueSet/route-codes )A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
60. AdministrableProductDefinition.routeOfAdministration.firstDose | |
Definition | The first dose (dose quantity) administered can be specified for the product, using a numerical value and its unit of measurement. |
Short | The first dose (dose quantity) administered can be specified for the product |
Control | 0..1 |
Type | Quantity |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
62. AdministrableProductDefinition.routeOfAdministration.maxSingleDose | |
Definition | The maximum single dose that can be administered, specified using a numerical value and its unit of measurement. |
Short | The maximum single dose that can be administered |
Control | 0..1 |
Type | Quantity |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
64. AdministrableProductDefinition.routeOfAdministration.maxDosePerDay | |
Definition | The maximum dose per day (maximum dose quantity to be administered in any one 24-h period) that can be administered. |
Short | The maximum dose quantity to be administered in any one 24-h period |
Control | 0..1 |
Type | Quantity |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
66. AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod | |
Definition | The maximum dose per treatment period that can be administered. |
Short | The maximum dose per treatment period that can be administered |
Control | 0..1 |
Type | Ratio |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
68. AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod | |
Definition | The maximum treatment period during which the product can be administered. |
Short | The maximum treatment period during which the product can be administered |
Control | 0..1 |
Type | Duration |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
70. AdministrableProductDefinition.routeOfAdministration.targetSpecies | |
Definition | A species for which this route applies. |
Short | A species for which this route applies |
Control | 0..* |
Type | BackboneElement |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
72. AdministrableProductDefinition.routeOfAdministration.targetSpecies.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
74. AdministrableProductDefinition.routeOfAdministration.targetSpecies.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
76. AdministrableProductDefinition.routeOfAdministration.targetSpecies.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
78. AdministrableProductDefinition.routeOfAdministration.targetSpecies.code | |
Definition | Coded expression for the species. |
Short | Coded expression for the species |
Control | 1..1 |
Binding | For example codes, see TargetSpecies (example to http://hl7.org/fhir/ValueSet/target-species )A tissue type of an animal. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
80. AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod | |
Definition | A species specific time during which consumption of animal product is not appropriate. |
Short | A species specific time during which consumption of animal product is not appropriate |
Control | 0..* |
Type | BackboneElement |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
82. AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
84. AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
86. AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
88. AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.tissue | |
Definition | Coded expression for the type of tissue for which the withdrawal period applies, e.g. meat, milk. |
Short | The type of tissue for which the withdrawal period applies, e.g. meat, milk |
Control | 1..1 |
Binding | For example codes, see AnimalTissueType (example to http://hl7.org/fhir/ValueSet/animal-tissue-type )A tissue type of an animal. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
90. AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value | |
Definition | A value for the time. |
Short | A value for the time |
Control | 1..1 |
Type | Quantity |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
92. AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation | |
Definition | Extra information about the withdrawal period. |
Short | Extra information about the withdrawal period |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |