Basic-ImagingSelection: General - EU Imaging Report R4 v1.0.0-ballot

EU Imaging Report R4, published by HL7 Europe. This guide is not an authorized publication; it is the continuous build for version 1.0.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/hl7-eu/imaging-r4/ and changes regularly. See the Directory of published versions

Resource Profile: Basic-ImagingSelection: General - Detailed Descriptions

Page standards status: Draft

Maturity Level: 1

Definitions for the ImagingSelectionEuImaging resource profile

Key Elements Table
Differential Table
Snapshot Table

See the documentation on how to interpret the contents of this table

0. Basic
Definition	Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.
Short	Resource for non-supported content
Control	0..*
Is Modifier	false
Summary	false
Alternate Names	Z-resource, Extension-resource, Custom-resource
Invariants	dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (`contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (`contained.meta.security.empty()`) dom-6: A resource should have narrative for robust management (text.`div`.exists()) dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Basic.implicitRules
Definition	A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Short	A set of rules under which this content was created
Comments	Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Control	0..1
Type	uri
Is Modifier	true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Basic.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	20..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
6. Basic.extension:issued
Slice Name	issued
Definition	R5: `ImagingSelection.issued` (new:instant)
Short	R5: Date / Time when this imaging selection was created (new)
Comments	Element `ImagingSelection.issued` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.issued` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Date / Time when this imaging selection was created (new)) (Extension Type: instant)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Basic.extension:performer
Slice Name	performer
Definition	R5: `ImagingSelection.performer` (new:BackboneElement)
Short	R5: Selector of the instances (human or machine) (new)
Comments	Element `ImagingSelection.performer` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.performer` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Selector of the instances (human or machine) (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
10. Basic.extension:basedOn
Slice Name	basedOn
Definition	R5: `ImagingSelection.basedOn` (new:Reference(CarePlan,ServiceRequest,Appointment,AppointmentResponse,Task))
Short	R5: Associated request (new)
Comments	Element `ImagingSelection.basedOn` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.basedOn` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Associated request (new)) (Extension Type: Reference(Cross-version Profile for R5.CarePlan for use in FHIR R4, CarePlan, Cross-version Profile for R5.ServiceRequest for use in FHIR R4, ServiceRequest, Cross-version Profile for R5.Appointment for use in FHIR R4, Appointment, Cross-version Profile for R5.AppointmentResponse for use in FHIR R4, AppointmentResponse, Cross-version Profile for R5.Task for use in FHIR R4, Task))
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Basic.extension:category
Slice Name	category
Definition	R5: `ImagingSelection.category` (new:CodeableConcept)
Short	R5: Classifies the imaging selection (new)
Comments	Element `ImagingSelection.category` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.category` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Classifies the imaging selection (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Basic.extension:code
Slice Name	code
Definition	R5: `ImagingSelection.code` (new:CodeableConcept)
Short	R5: Imaging Selection purpose text or code (new)
Comments	Element `ImagingSelection.code` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.
Control	1..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Imaging Selection purpose text or code (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Basic.extension:studyUid
Slice Name	studyUid
Definition	R5: `ImagingSelection.studyUid` (new:id)
Short	R5: DICOM Study Instance UID (new)
Comments	Element `ImagingSelection.studyUid` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.studyUid` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). See DICOM PS3.3 C.7.2.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: DICOM Study Instance UID (new)) (Extension Type: id)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Basic.extension:derivedFrom
Slice Name	derivedFrom
Definition	R5: `ImagingSelection.derivedFrom` (new:Reference(ImagingStudy,DocumentReference))
Short	R5: The imaging study from which the imaging selection is derived (new)
Comments	Element `ImagingSelection.derivedFrom` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.derivedFrom` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	1..* This element is affected by the following invariants: ele-1
Type	Extension(R5: The imaging study from which the imaging selection is derived (new)) (Extension Type: Reference(Cross-version Profile for R5.ImagingStudy for use in FHIR R4, ImagingStudy, Cross-version Profile for R5.DocumentReference for use in FHIR R4, Media))
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Basic.extension:endpoint
Slice Name	endpoint
Definition	R5: `ImagingSelection.endpoint` (new:Reference(Endpoint))
Short	R5: The network service providing retrieval for the images referenced in the imaging selection (new)
Comments	Element `ImagingSelection.endpoint` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.endpoint` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Typical endpoint types include DICOM WADO-RS, which is used to retrieve DICOM instances in native or rendered (e.g., JPG, PNG) formats using a RESTful API; DICOM WADO-URI, which can similarly retrieve native or rendered instances, except using an HTTP query-based approach.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: The network service providing retrieval for the images referenced in the imaging selection (new)) (Extension Type: Reference(Cross-version Profile for R5.Endpoint for use in FHIR R4, Endpoint))
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Basic.extension:seriesUid
Slice Name	seriesUid
Definition	R5: `ImagingSelection.seriesUid` (new:id)
Short	R5: DICOM Series Instance UID (new)
Comments	Element `ImagingSelection.seriesUid` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.seriesUid` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). See DICOM PS3.3 C.7.3.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: DICOM Series Instance UID (new)) (Extension Type: id)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Basic.extension:seriesNumber
Slice Name	seriesNumber
Definition	R5: `ImagingSelection.seriesNumber` (new:unsignedInt)
Short	R5: DICOM Series Number (new)
Comments	Element `ImagingSelection.seriesNumber` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.seriesNumber` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). See DICOM PS3.3 C.7.3.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: DICOM Series Number (new)) (Extension Type: unsignedInt)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
26. Basic.extension:frameOfReferenceUid
Slice Name	frameOfReferenceUid
Definition	R5: `ImagingSelection.frameOfReferenceUid` (new:id)
Short	R5: The Frame of Reference UID for the selected images (new)
Comments	Element `ImagingSelection.frameOfReferenceUid` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.frameOfReferenceUid` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). See DICOM PS3.3 C.7.4.1.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: The Frame of Reference UID for the selected images (new)) (Extension Type: id)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Basic.extension:bodySite
Slice Name	bodySite
Definition	R5: `ImagingSelection.bodySite` (new:CodeableReference(BodyStructure))
Short	R5: Body part examined (new)
Comments	Element `ImagingSelection.bodySite` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.bodySite` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Body part examined (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
30. Basic.extension:focus
Slice Name	focus
Definition	R5: `ImagingSelection.focus` (new:Reference(ImagingSelection))
Short	R5: Related resource that is the focus for the imaging selection (new)
Comments	Element `ImagingSelection.focus` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.focus` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). An imaging selection may reference a DICOM resource that itself references other DICOM resources. e.g. a presentation state references a set of source images or frames.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Related resource that is the focus for the imaging selection (new)) (Extension Type: Reference(Cross-version Profile for R5.ImagingSelection for use in FHIR R4, Basic))
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Basic.extension:instance
Slice Name	instance
Definition	R5: `ImagingSelection.instance` (new:BackboneElement)
Short	R5: The selected instances (new)
Comments	Element `ImagingSelection.instance` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.instance` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: The selected instances (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
34. Basic.extension:derivedFrom/study
Slice Name	derivedFrom/study
Definition	R5: `ImagingSelection.derivedFrom` (new:Reference(ImagingStudy,DocumentReference))
Short	R5: The imaging study from which the imaging selection is derived (new)
Comments	Element `ImagingSelection.derivedFrom` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.derivedFrom` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	1..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: The imaging study from which the imaging selection is derived (new)) (Extension Type: Reference(Cross-version Profile for R5.ImagingStudy for use in FHIR R4, ImagingStudy, Cross-version Profile for R5.DocumentReference for use in FHIR R4, Media))
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
36. Basic.extension:derivedFrom/study.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Basic.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
38. Basic.extension:derivedFrom/study.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`{ "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-ImagingSelection.derivedFrom" }` `<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-ImagingSelection.derivedFrom"/>`
40. Basic.extension:derivedFrom/study.value[x]
Definition	The imaging study from which the imaging selection is made. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	The imaging study from which the imaging selection is derivedValue of extension
Control	10..1
Type	Reference(ImagingStudy: Reported Study), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Basic.modifierExtension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short	ExtensionExtensions that cannot be ignored
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Is Modifier	true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summary	false
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Basic.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
44. Basic.modifierExtension:status
Slice Name	status
Definition	R5: `ImagingSelection.status` (new:code)
Short	R5: available \| entered-in-error \| unknown (new)
Comments	Element `ImagingSelection.status` is not mapped to FHIR R4, since FHIR R5 `ImagingSelection` is not mapped. Element `ImagingSelection.status` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Unknown does not represent "other" - one of the defined statuses must apply. Unknown is used when the authoring system is not sure what the current status is.
Control	1..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: available \| entered-in-error \| unknown (new)) (Extension Type: code)
Is Modifier	true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Basic.code
Definition	Identifies the 'type' of resource - equivalent to the resource name for other resources.
Short	Kind of Resource
Comments	Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code. This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored.
Control	1..1
Binding	For example codes, see BasicResourceTypeshttp://hl7.org/fhir/ValueSet/basic-resource-type\|4.0.1 (example to `http://hl7.org/fhir/ValueSet/basic-resource-type\|4.0.1`) Codes for identifying types of resources not yet defined by FHIR.
Type	CodeableConcept
Is Modifier	true because This element determines what kind of resource is being represented which drives the meaning of all of the other elements.
Summary	true
Requirements	Must be able to distinguish different types of Basic resources.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Basic.subject
Definition	Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.
Short	Identifies the focus of this resource
Comments	Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.
Control	0..1
Type	Reference(Patient (EU core), Resource)
Is Modifier	false
Summary	true
Requirements	Needed for partitioning the resource by Patient.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

See the documentation on how to interpret the contents of this table

0. Basic
2. Basic.extension
Control	2..?
4. Basic.extension:derivedFrom
Slice Name	derivedFrom
Control	1..?
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: profile @ value.resolve() Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them
6. Basic.extension:derivedFrom/study
Slice Name	derivedFrom/study
Control	1..1
8. Basic.extension:derivedFrom/study.extension
Control	0..0
10. Basic.extension:derivedFrom/study.value[x]
Control	1..?
Type	Reference(ImagingStudy: Reported Study)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
12. Basic.modifierExtension
Control	1..?
14. Basic.subject
Type	Reference(Patient (EU core))

See the documentation on how to interpret the contents of this table

0. Basic

Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

Short Resource for non-supported content

Control 0..*

Is Modifier false

Summary false

Alternate Names Z-resource, Extension-resource, Custom-resource

Invariants dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())

2. Basic.id

Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Short Logical id of this artifact

Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control 0..1

Type

Is Modifier false

Summary true

4. Basic.meta

Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Short Metadata about the resource

Control 0..1

Type

Meta

Is Modifier false

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

6. Basic.implicitRules

Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Short A set of rules under which this content was created

Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control 0..1

Type

uri

Is Modifier true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

8. Basic.language

Definition

The base language in which the resource is written.

Short Language of the resource content

Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control 0..1

Binding

The codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

A human language.

Additional Bindings

Purpose

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

10. Basic.text

Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Short Text summary of the resource, for human interpretation

Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control 0..1

Type

Narrative

Is Modifier false

Summary false

Alternate Names narrative, html, xhtml, display

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

12. Basic.contained

Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Short Contained, inline Resources

Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control 0..*

Type

Resource

Is Modifier false

Summary false

Alternate Names inline resources, anonymous resources, contained resources

14. Basic.extension

Definition

An Extension

Short Extension

Control 2..*

Type

Extension

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

Slicing

This element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

16. Basic.extension:issued

Slice Name issued

Definition

R5: ImagingSelection.issued (new:instant)

Short R5: Date / Time when this imaging selection was created (new)

Comments

Element ImagingSelection.issued is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.issued has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Date / Time when this imaging selection was created (new)) (Extension Type: instant)

Is Modifier false

Summary false

18. Basic.extension:performer

Slice Name performer

Definition

R5: ImagingSelection.performer (new:BackboneElement)

Short R5: Selector of the instances (human or machine) (new)

Comments

Element ImagingSelection.performer is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.performer has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Selector of the instances (human or machine) (new)) (Complex Extension)

Is Modifier false

20. Basic.extension:basedOn

Slice Name basedOn

Definition

R5: ImagingSelection.basedOn (new:Reference(CarePlan,ServiceRequest,Appointment,AppointmentResponse,Task))

Short R5: Associated request (new)

Comments

Element ImagingSelection.basedOn is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.basedOn has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Associated request (new)) (Extension Type: Reference(Cross-version Profile for R5.CarePlan for use in FHIR R4, CarePlan, Cross-version Profile for R5.ServiceRequest for use in FHIR R4, ServiceRequest, Cross-version Profile for R5.Appointment for use in FHIR R4, Appointment, Cross-version Profile for R5.AppointmentResponse for use in FHIR R4, AppointmentResponse, Cross-version Profile for R5.Task for use in FHIR R4, Task))

Is Modifier false

Summary false

22. Basic.extension:category

Slice Name category

Definition

R5: ImagingSelection.category (new:CodeableConcept)

Short R5: Classifies the imaging selection (new)

Comments

Element ImagingSelection.category is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.category has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Classifies the imaging selection (new)) (Extension Type: CodeableConcept)

Is Modifier false

Summary false

24. Basic.extension:code

Slice Name code

Definition

R5: ImagingSelection.code (new:CodeableConcept)

Short R5: Imaging Selection purpose text or code (new)

Comments

Element ImagingSelection.code is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.code has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

Control 1..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Imaging Selection purpose text or code (new)) (Extension Type: CodeableConcept)

Is Modifier false

Summary false

26. Basic.extension:studyUid

Slice Name studyUid

Definition

R5: ImagingSelection.studyUid (new:id)

Short R5: DICOM Study Instance UID (new)

Comments

Element ImagingSelection.studyUid is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.studyUid has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). See DICOM PS3.3 C.7.2.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: DICOM Study Instance UID (new)) (Extension Type: id)

Is Modifier false

Summary false

28. Basic.extension:derivedFrom

Slice Name derivedFrom

Definition

R5: ImagingSelection.derivedFrom (new:Reference(ImagingStudy,DocumentReference))

Short R5: The imaging study from which the imaging selection is derived (new)

Comments

Element ImagingSelection.derivedFrom is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.derivedFrom has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 1..*
This element is affected by the following invariants: ele-1

Type Extension(R5: The imaging study from which the imaging selection is derived (new)) (Extension Type: Reference(Cross-version Profile for R5.ImagingStudy for use in FHIR R4, ImagingStudy, Cross-version Profile for R5.DocumentReference for use in FHIR R4, Media))

Is Modifier false

Summary false

30. Basic.extension:endpoint

Slice Name endpoint

Definition

R5: ImagingSelection.endpoint (new:Reference(Endpoint))

Short R5: The network service providing retrieval for the images referenced in the imaging selection (new)

Comments

Element ImagingSelection.endpoint is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.endpoint has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Typical endpoint types include DICOM WADO-RS, which is used to retrieve DICOM instances in native or rendered (e.g., JPG, PNG) formats using a RESTful API; DICOM WADO-URI, which can similarly retrieve native or rendered instances, except using an HTTP query-based approach.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: The network service providing retrieval for the images referenced in the imaging selection (new)) (Extension Type: Reference(Cross-version Profile for R5.Endpoint for use in FHIR R4, Endpoint))

Is Modifier false

Summary false

32. Basic.extension:seriesUid

Slice Name seriesUid

Definition

R5: ImagingSelection.seriesUid (new:id)

Short R5: DICOM Series Instance UID (new)

Comments

Element ImagingSelection.seriesUid is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.seriesUid has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). See DICOM PS3.3 C.7.3.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: DICOM Series Instance UID (new)) (Extension Type: id)

Is Modifier false

Summary false

34. Basic.extension:seriesNumber

Slice Name seriesNumber

Definition

R5: ImagingSelection.seriesNumber (new:unsignedInt)

Short R5: DICOM Series Number (new)

Comments

Element ImagingSelection.seriesNumber is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.seriesNumber has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). See DICOM PS3.3 C.7.3.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: DICOM Series Number (new)) (Extension Type: unsignedInt)

Is Modifier false

Summary false

36. Basic.extension:frameOfReferenceUid

Slice Name frameOfReferenceUid

Definition

R5: ImagingSelection.frameOfReferenceUid (new:id)

Short R5: The Frame of Reference UID for the selected images (new)

Comments

Element ImagingSelection.frameOfReferenceUid is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.frameOfReferenceUid has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). See DICOM PS3.3 C.7.4.1.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: The Frame of Reference UID for the selected images (new)) (Extension Type: id)

Is Modifier false

Summary false

38. Basic.extension:bodySite

Slice Name bodySite

Definition

R5: ImagingSelection.bodySite (new:CodeableReference(BodyStructure))

Short R5: Body part examined (new)

Comments

Element ImagingSelection.bodySite is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.bodySite has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Body part examined (new)) (Complex Extension)

Is Modifier false

40. Basic.extension:focus

Slice Name focus

Definition

R5: ImagingSelection.focus (new:Reference(ImagingSelection))

Short R5: Related resource that is the focus for the imaging selection (new)

Comments

Element ImagingSelection.focus is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.focus has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). An imaging selection may reference a DICOM resource that itself references other DICOM resources. e.g. a presentation state references a set of source images or frames.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Related resource that is the focus for the imaging selection (new)) (Extension Type: Reference(Cross-version Profile for R5.ImagingSelection for use in FHIR R4, Basic))

Is Modifier false

Summary false

42. Basic.extension:instance

Slice Name instance

Definition

R5: ImagingSelection.instance (new:BackboneElement)

Short R5: The selected instances (new)

Comments

Element ImagingSelection.instance is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.instance has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: The selected instances (new)) (Complex Extension)

Is Modifier false

44. Basic.extension:derivedFrom/study

Slice Name derivedFrom/study

Definition

R5: ImagingSelection.derivedFrom (new:Reference(ImagingStudy,DocumentReference))

Short R5: The imaging study from which the imaging selection is derived (new)

Comments

Control 1..1
This element is affected by the following invariants: ele-1

Is Modifier false

Summary false

46. Basic.extension:derivedFrom/study.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

Type

string

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

48. Basic.extension:derivedFrom/study.extension

Definition

An Extension

Short Extension

Control 0..0

Type

Extension

Is Modifier false

Summary false

Slicing

This element introduces a set of slices on Basic.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

50. Basic.extension:derivedFrom/study.url

Definition

Source of the definition for the extension code - a logical name or a URL.

Short identifies the meaning of the extension

Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control 1..1

Type

uri

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

Fixed Value

{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-ImagingSelection.derivedFrom"
}

<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-ImagingSelection.derivedFrom"/>

52. Basic.extension:derivedFrom/study.value[x]

Definition

The imaging study from which the imaging selection is made.

Short The imaging study from which the imaging selection is derived

Control 1..1

Type Reference(ImagingStudy: Reported Study)

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

54. Basic.modifierExtension

Definition

An Extension

Short Extension

Control 1..*

Type

Extension

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them

Summary false

Slicing

This element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

56. Basic.modifierExtension:status

Slice Name status

Definition

R5: ImagingSelection.status (new:code)

Short R5: available | entered-in-error | unknown (new)

Comments

Element ImagingSelection.status is not mapped to FHIR R4, since FHIR R5 ImagingSelection is not mapped. Element ImagingSelection.status has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Unknown does not represent "other" - one of the defined statuses must apply. Unknown is used when the authoring system is not sure what the current status is.

Control 1..1
This element is affected by the following invariants: ele-1

Type Extension(R5: available | entered-in-error | unknown (new)) (Extension Type: code)

Is Modifier true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid

Summary false

58. Basic.identifier

Definition

Identifier assigned to the resource for business purposes, outside the context of FHIR.

Short Business identifier

Note This is a business identifier, not a resource identifier (see discussion)

Control 0..*

Type

Identifier

Is Modifier false

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

60. Basic.code

Definition

Identifies the 'type' of resource - equivalent to the resource name for other resources.

Short Kind of Resource

Comments

Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored.

Control 1..1

Binding

For example codes, see BasicResourceTypes
(example to http://hl7.org/fhir/ValueSet/basic-resource-type|4.0.1)

Codes for identifying types of resources not yet defined by FHIR.

Type

CodeableConcept

Is Modifier true because This element determines what kind of resource is being represented which drives the meaning of all of the other elements.

Summary true

Requirements

Must be able to distinguish different types of Basic resources.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

62. Basic.subject

Definition

Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

Short Identifies the focus of this resource

Comments

Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

Control 0..1

Type Reference(Patient (EU core))

Is Modifier false

Summary true

Requirements

Needed for partitioning the resource by Patient.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

64. Basic.created

Definition

Identifies when the resource was first created.

Short When created

Control 0..1

Type

date

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Requirements

Allows ordering resource instances by time.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

66. Basic.author

Definition

Indicates who was responsible for creating the resource instance.

Short Who created

Control 0..1

Type Reference(Practitioner, PractitionerRole, Patient, RelatedPerson, Organization)

Is Modifier false

Summary true

Requirements

Needed for partitioning the resource.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))