HL7 Europe Patient Summary
1.0.0-ci-build - ci-build 150

HL7 Europe Patient Summary, published by HL7 Europe. This guide is not an authorized publication; it is the continuous build for version 1.0.0-ci-build built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/hl7-eu/eps/ and changes regularly. See the Directory of published versions

Resource Profile: ConditionOblEuEps - Detailed Descriptions

Draft as of 2026-02-06

Definitions for the condition-obl-eu-eps resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Condition
Definition

A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

ShortDetailed information about conditions, problems or diagnoses
Control0..*
Is Modifierfalse
Summaryfalse
Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
con-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
2. Condition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Condition.extension:assertedDate
Slice NameassertedDate
Definition

When the asserter identified the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept that may have risen to a level of or remains a concern. For example, when the patient experiences chest pain, the asserted date represents when the clinician began following the chest pain - not when the patient experienced the chest pain. Asserted date supports the recognition that information is not always entered in a system immediately. Assertion and recording are different acts, so asserted date and recorded date are semantically different. However, they may be the same date and close in time. If this difference is significant for your use case, assertion date may be useful.

ShortDate the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept was first asserted
Comments

The assertedDate is in the context of the recording practitioner and might not be the same as the recordedDate.

Control0..1
TypeExtension(Condition Asserted Date) (Extension Type: dateTime)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Condition.extension:assertedDate.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Condition.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. Condition.extension:assertedDate.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuehttp://hl7.org/fhir/StructureDefinition/condition-assertedDate
    10. Condition.extension:assertedDate.value[x]
    Definition

    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortDate and time of the diagnosis assertionValue of extension
    Control10..1
    This element is affected by the following invariants: ext-1
    TypedateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Condition.extension:relatedArtifact
    Slice NamerelatedArtifact
    Definition

    Related artifacts such as additional documentation, justification, dependencies, bibliographic references, and predecessor and successor artifacts.

    ShortAdditional documentation, citations, etc.
    Comments

    Each related artifact is either an attachment, or a reference to another resource, but not both.

    Control0..*
    TypeExtension(Artifact related artifact) (Extension Type: RelatedArtifact)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Condition.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Condition.clinicalStatus
    Definition

    The problem status describes the condition of the problem:

    1. Active problems are problems of which the patient experiences symptoms or for which evidence exists.

    2. If condition is abated, then clinicalStatus must be either inactive, resolved, or remission.

    3. Problems with the status 'Inactive' refer to problems that don't affect the patient anymore or that of which there is no evidence of existence anymore.


    The clinical status of the condition.

    Shortactive | recurrence | relapse | inactive | remission | resolved
    Comments

    The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

    Control0..1
    This element is affected by the following invariants: con-3, con-4, con-5
    BindingThe codes SHALL be taken from ConditionClinicalStatusCodeshttp://hl7.org/fhir/ValueSet/condition-clinical|4.0.1
    (required to http://hl7.org/fhir/ValueSet/condition-clinical)
    TypeCodeableConcept
    Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
    Obligations
      ObligationsActor
      SHALL:populate-if-knownCreator (IPS)
      SHALL:handleConsumer (IPS)
      SHOULD:displayConsumer (IPS)
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Condition.verificationStatus
      Definition

      The verification status to support the clinical status of the condition.

      Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
      Comments

      verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

      Control0..1
      This element is affected by the following invariants: con-3, con-5
      BindingThe codes SHALL be taken from ConditionVerificationStatushttp://hl7.org/fhir/ValueSet/condition-ver-status|4.0.1
      (required to http://hl7.org/fhir/ValueSet/condition-ver-status)
      TypeCodeableConcept
      Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Condition.category
      Definition

      A category assigned to the condition.

      ShortCategoryproblem-list-item | encounter-diagnosis
      Comments

      The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

      Control0..*
      BindingUnless not suitable, these codes SHALL be taken from ConditionCategoryCodeshttp://hl7.org/fhir/ValueSet/condition-category|4.0.1
      (extensible to http://hl7.org/fhir/ValueSet/condition-category|4.0.1)

      A category assigned to the condition.

      TypeCodeableConcept
      Is Modifierfalse
      Obligations
        ObligationsActor
        SHALL:populate-if-knownCreator (IPS)
        SHALL:handleConsumer (IPS)
        SHOULD:displayConsumer (IPS)
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Condition.severity
        Definition

        A subjective assessment of the severity of the condition as evaluated by the clinician.

        ShortSubjective severity of condition
        Comments

        Coding of the severity with a terminology is preferred, where possible.

        Control0..1
        BindingThe codes SHOULD be taken from Condition/DiagnosisSeverityhttp://hl7.org/fhir/ValueSet/condition-severity|4.0.1
        (preferred to http://hl7.org/fhir/ValueSet/condition-severity)
        TypeCodeableConcept
        Is Modifierfalse
        Obligations
          ObligationsActor
          SHALL:populate-if-knownCreator (IPS)
          SHALL:handleConsumer (IPS)
          SHOULD:displayConsumer (IPS)
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          24. Condition.code
          Definition

          The problem code specifies the problem. Depending on the setting, different code systems can be used. The ProblemCodelist provides an overview of the possible code systems.


          Identification of the condition, problem or diagnosis.

          ShortIdentification of the condition, problem or diagnosis
          Control10..1
          BindingThe codes SHOULD be taken from For example codes, see Problems - IPShttp://hl7.org/fhir/ValueSet/condition-code|4.0.1
          (preferred to http://hl7.org/fhir/uv/ips/ValueSet/problems-uv-ips)

          Valueset to describe the actual problem experienced by the patient


          Identification of the condition or diagnosis.

          TypeCodeableConcept
          Is Modifierfalse
          Obligations
            ObligationsActor
            SHALL:populate-if-knownCreator (IPS)
            SHALL:handleConsumer (IPS)
            SHOULD:displayConsumer (IPS)
            Summarytrue
            Requirements

            0..1 to account for primarily narrative only resources.

            Alternate Namestype
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. Condition.subject
            Definition

            Indicates the patient or group who the condition record is associated with.

            ShortWho has the condition?
            Control1..1
            TypeReference(Patient (EU core), Patient, Group)
            Is Modifierfalse
            Obligations
              ObligationsActor
              SHALL:populate-if-knownCreator (IPS)
              SHALL:handleConsumer (IPS)
              SHOULD:displayConsumer (IPS)
              Summarytrue
              Requirements

              Group is typically used for veterinary or public health use cases.

              Alternate Namespatient
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              28. Condition.subject.reference
              Definition

              A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

              ShortLiteral reference, Relative, internal or absolute URL
              Comments

              Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

              Control10..1
              This element is affected by the following invariants: ref-1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Obligations
                ObligationsActor
                SHALL:populate-if-knownCreator (IPS)
                SHALL:handleConsumer (IPS)
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                30. Condition.onset[x]
                Definition

                Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                ShortEstimated or actual date, date-time, or age
                Comments

                Age is generally used when the patient reports an age at which the Condition began to occur.

                Control0..1
                TypeChoice of: dateTime, Age, Period, Range, string
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Obligations
                  ObligationsActor
                  SHALL:populate-if-knownCreator (IPS)
                  SHALL:handleConsumer (IPS)
                  SHOULD:displayConsumer (IPS)
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Condition.onset[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                  • type @ $this
                  • 32. Condition.onset[x]:onsetDateTime
                    Slice NameonsetDateTime
                    Definition

                    Onset of the symptom, complaint, functional limitation, complication or date of diagnosis. A ‘vague’ date, such as only the year or the month and the year, is permitted.


                    Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                    ShortEstimated or actual date, date-time, or age
                    Comments

                    Age is generally used when the patient reports an age at which the Condition began to occur.

                    Control0..1
                    TypedateTime, string, Period, Range, Age
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Obligations
                      ObligationsActor
                      SHOULD:able-to-populateCreator (IPS)
                      SHALL:handleConsumer (IPS)
                      SHOULD:displayConsumer (IPS)
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      34. Condition.abatement[x]
                      Definition

                      The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                      ShortWhen in resolution/remission
                      Comments

                      There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                      Control0..1
                      This element is affected by the following invariants: con-4
                      TypeChoice of: dateTime, Age, Period, Range, string
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      SlicingThis element introduces a set of slices on Condition.abatement[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • type @ $this
                      • 36. Condition.abatement[x]:abatementDateTime
                        Slice NameabatementDateTime
                        Definition

                        The date or estimated date that the condition resolved or went into remission. A ‘vague’ date, such as only the year or the month and the year, is permitted


                        The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                        ShortWhen in resolution/remission
                        Comments

                        There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                        Control0..1
                        This element is affected by the following invariants: con-4
                        TypedateTime, string, Period, Range, Age
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                        Guidance on how to interpret the contents of this table can be foundhere

                        0. Condition
                        2. Condition.clinicalStatus
                        Obligations
                          ObligationsActor
                          SHALL:populate-if-knownCreator (IPS)
                          SHALL:handleConsumer (IPS)
                          SHOULD:displayConsumer (IPS)
                          4. Condition.category
                          Obligations
                            ObligationsActor
                            SHALL:populate-if-knownCreator (IPS)
                            SHALL:handleConsumer (IPS)
                            SHOULD:displayConsumer (IPS)
                            6. Condition.severity
                            Obligations
                              ObligationsActor
                              SHALL:populate-if-knownCreator (IPS)
                              SHALL:handleConsumer (IPS)
                              SHOULD:displayConsumer (IPS)
                              8. Condition.code
                              Obligations
                                ObligationsActor
                                SHALL:populate-if-knownCreator (IPS)
                                SHALL:handleConsumer (IPS)
                                SHOULD:displayConsumer (IPS)
                                10. Condition.subject
                                Obligations
                                  ObligationsActor
                                  SHALL:populate-if-knownCreator (IPS)
                                  SHALL:handleConsumer (IPS)
                                  SHOULD:displayConsumer (IPS)
                                  12. Condition.subject.reference
                                  Obligations
                                    ObligationsActor
                                    SHALL:populate-if-knownCreator (IPS)
                                    SHALL:handleConsumer (IPS)
                                    14. Condition.onset[x]
                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                    Obligations
                                      ObligationsActor
                                      SHALL:populate-if-knownCreator (IPS)
                                      SHALL:handleConsumer (IPS)
                                      SHOULD:displayConsumer (IPS)
                                      16. Condition.onset[x]:onsetDateTime
                                      Slice NameonsetDateTime
                                      TypedateTime
                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Obligations
                                        ObligationsActor
                                        SHOULD:able-to-populateCreator (IPS)
                                        SHALL:handleConsumer (IPS)
                                        SHOULD:displayConsumer (IPS)

                                        Guidance on how to interpret the contents of this table can be foundhere

                                        0. Condition
                                        Definition

                                        A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

                                        ShortDetailed information about conditions, problems or diagnoses
                                        Control0..*
                                        Is Modifierfalse
                                        Summaryfalse
                                        Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
                                        con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
                                        con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
                                        dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                                        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                                        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                                        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                                        dom-6: A resource should have narrative for robust management (text.`div`.exists())
                                        2. Condition.id
                                        Definition

                                        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                                        ShortLogical id of this artifact
                                        Comments

                                        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                                        Control0..1
                                        Typeid
                                        Is Modifierfalse
                                        Summarytrue
                                        4. Condition.meta
                                        Definition

                                        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                                        ShortMetadata about the resource
                                        Control0..1
                                        TypeMeta
                                        Is Modifierfalse
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        6. Condition.implicitRules
                                        Definition

                                        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                                        ShortA set of rules under which this content was created
                                        Comments

                                        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                                        Control0..1
                                        Typeuri
                                        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        8. Condition.language
                                        Definition

                                        The base language in which the resource is written.

                                        ShortLanguage of the resource content
                                        Comments

                                        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                                        Control0..1
                                        BindingThe codes SHOULD be taken from CommonLanguages
                                        (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

                                        A human language.

                                        Additional BindingsPurpose
                                        AllLanguagesMax Binding
                                        Typecode
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        10. Condition.text
                                        Definition

                                        Human readable specification of the problem. This is a general notes/comments entry for description of the problem, its diagnosis and prognosis.

                                        ShortText summary of the resource, for human interpretation
                                        Comments

                                        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                                        Control0..1
                                        TypeNarrative
                                        Is Modifierfalse
                                        Summaryfalse
                                        Alternate Namesnarrative, html, xhtml, display
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        12. Condition.contained
                                        Definition

                                        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                                        ShortContained, inline Resources
                                        Comments

                                        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                                        Control0..*
                                        TypeResource
                                        Is Modifierfalse
                                        Summaryfalse
                                        Alternate Namesinline resources, anonymous resources, contained resources
                                        14. Condition.extension
                                        Definition

                                        An Extension

                                        ShortExtension
                                        Control0..*
                                        TypeExtension
                                        Is Modifierfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        SlicingThis element introduces a set of slices on Condition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                        • value @ url
                                        • 16. Condition.extension:assertedDate
                                          Slice NameassertedDate
                                          Definition

                                          When the asserter identified the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept that may have risen to a level of or remains a concern. For example, when the patient experiences chest pain, the asserted date represents when the clinician began following the chest pain - not when the patient experienced the chest pain. Asserted date supports the recognition that information is not always entered in a system immediately. Assertion and recording are different acts, so asserted date and recorded date are semantically different. However, they may be the same date and close in time. If this difference is significant for your use case, assertion date may be useful.

                                          ShortDate the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept was first asserted
                                          Comments

                                          The assertedDate is in the context of the recording practitioner and might not be the same as the recordedDate.

                                          Control0..1
                                          TypeExtension(Condition Asserted Date) (Extension Type: dateTime)
                                          Is Modifierfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          18. Condition.extension:assertedDate.id
                                          Definition

                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                          ShortUnique id for inter-element referencing
                                          Control0..1
                                          This element is affected by the following invariants: ele-1
                                          Typeid
                                          Is Modifierfalse
                                          XML FormatIn the XML format, this property is represented as an attribute.
                                          Summaryfalse
                                          20. Condition.extension:assertedDate.extension
                                          Definition

                                          An Extension

                                          ShortExtension
                                          Control0..0
                                          TypeExtension
                                          Is Modifierfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          SlicingThis element introduces a set of slices on Condition.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                          • value @ url
                                          • 22. Condition.extension:assertedDate.url
                                            Definition

                                            Source of the definition for the extension code - a logical name or a URL.

                                            Shortidentifies the meaning of the extension
                                            Comments

                                            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                                            Control1..1
                                            Typeuri
                                            Is Modifierfalse
                                            XML FormatIn the XML format, this property is represented as an attribute.
                                            Summaryfalse
                                            Fixed Valuehttp://hl7.org/fhir/StructureDefinition/condition-assertedDate
                                            24. Condition.extension:assertedDate.value[x]
                                            Definition

                                            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                                            ShortDate and time of the diagnosis assertion
                                            Control1..1
                                            This element is affected by the following invariants: ext-1
                                            TypedateTime
                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summaryfalse
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            26. Condition.extension:relatedArtifact
                                            Slice NamerelatedArtifact
                                            Definition

                                            Related artifacts such as additional documentation, justification, dependencies, bibliographic references, and predecessor and successor artifacts.

                                            ShortAdditional documentation, citations, etc.
                                            Comments

                                            Each related artifact is either an attachment, or a reference to another resource, but not both.

                                            Control0..*
                                            TypeExtension(Artifact related artifact) (Extension Type: RelatedArtifact)
                                            Is Modifierfalse
                                            Summaryfalse
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            28. Condition.modifierExtension
                                            Definition

                                            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                            ShortExtensions that cannot be ignored
                                            Comments

                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                            Control0..*
                                            TypeExtension
                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                                            Summaryfalse
                                            Requirements

                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                            Alternate Namesextensions, user content
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            30. Condition.identifier
                                            Definition

                                            Globally unique identifier of this problem which remain constant as the resource is updated and propagates from server to server.

                                            ShortExternal Ids for this condition
                                            Comments

                                            This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

                                            NoteThis is a business identifier, not a resource identifier (see discussion)
                                            Control0..*
                                            TypeIdentifier
                                            Is Modifierfalse
                                            Summarytrue
                                            Requirements

                                            Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            32. Condition.clinicalStatus
                                            Definition

                                            The problem status describes the condition of the problem:

                                            1. Active problems are problems of which the patient experiences symptoms or for which evidence exists.

                                            2. If condition is abated, then clinicalStatus must be either inactive, resolved, or remission.

                                            3. Problems with the status 'Inactive' refer to problems that don't affect the patient anymore or that of which there is no evidence of existence anymore.

                                            Shortactive | recurrence | relapse | inactive | remission | resolved
                                            Comments

                                            The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

                                            Control0..1
                                            This element is affected by the following invariants: con-3, con-4, con-5
                                            BindingThe codes SHALL be taken from ConditionClinicalStatusCodes
                                            (required to http://hl7.org/fhir/ValueSet/condition-clinical)
                                            TypeCodeableConcept
                                            Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
                                            Obligations
                                              ObligationsActor
                                              SHALL:populate-if-knownCreator (IPS)
                                              SHALL:handleConsumer (IPS)
                                              SHOULD:displayConsumer (IPS)
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              34. Condition.verificationStatus
                                              Definition

                                              The verification status to support the clinical status of the condition.

                                              Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
                                              Comments

                                              verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

                                              Control0..1
                                              This element is affected by the following invariants: con-3, con-5
                                              BindingThe codes SHALL be taken from ConditionVerificationStatus
                                              (required to http://hl7.org/fhir/ValueSet/condition-ver-status)
                                              TypeCodeableConcept
                                              Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              36. Condition.category
                                              Definition

                                              A category assigned to the condition.

                                              ShortCategory
                                              Comments

                                              The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

                                              Control0..*
                                              BindingUnless not suitable, these codes SHALL be taken from ConditionCategoryCodes
                                              (extensible to http://hl7.org/fhir/ValueSet/condition-category|4.0.1)

                                              A category assigned to the condition.

                                              TypeCodeableConcept
                                              Is Modifierfalse
                                              Obligations
                                                ObligationsActor
                                                SHALL:populate-if-knownCreator (IPS)
                                                SHALL:handleConsumer (IPS)
                                                SHOULD:displayConsumer (IPS)
                                                Summaryfalse
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                38. Condition.severity
                                                Definition

                                                A subjective assessment of the severity of the condition as evaluated by the clinician.

                                                ShortSubjective severity of condition
                                                Comments

                                                Coding of the severity with a terminology is preferred, where possible.

                                                Control0..1
                                                BindingThe codes SHOULD be taken from Condition/DiagnosisSeverity
                                                (preferred to http://hl7.org/fhir/ValueSet/condition-severity)
                                                TypeCodeableConcept
                                                Is Modifierfalse
                                                Obligations
                                                  ObligationsActor
                                                  SHALL:populate-if-knownCreator (IPS)
                                                  SHALL:handleConsumer (IPS)
                                                  SHOULD:displayConsumer (IPS)
                                                  Summaryfalse
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  40. Condition.code
                                                  Definition

                                                  The problem code specifies the problem. Depending on the setting, different code systems can be used. The ProblemCodelist provides an overview of the possible code systems.

                                                  ShortIdentification of the condition, problem or diagnosis
                                                  Control1..1
                                                  BindingThe codes SHOULD be taken from Problems - IPS
                                                  (preferred to http://hl7.org/fhir/uv/ips/ValueSet/problems-uv-ips)

                                                  Valueset to describe the actual problem experienced by the patient

                                                  TypeCodeableConcept
                                                  Is Modifierfalse
                                                  Obligations
                                                    ObligationsActor
                                                    SHALL:populate-if-knownCreator (IPS)
                                                    SHALL:handleConsumer (IPS)
                                                    SHOULD:displayConsumer (IPS)
                                                    Summarytrue
                                                    Requirements

                                                    0..1 to account for primarily narrative only resources.

                                                    Alternate Namestype
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    42. Condition.bodySite
                                                    Definition

                                                    The anatomical location where this condition manifests itself.

                                                    ShortAnatomical location, if relevant
                                                    Comments

                                                    Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

                                                    Control0..*
                                                    BindingThe codes SHOULD be taken from SNOMEDCTBodyStructures
                                                    (preferred to http://hl7.org/fhir/ValueSet/body-site)
                                                    TypeCodeableConcept
                                                    Is Modifierfalse
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    44. Condition.bodySite.id
                                                    Definition

                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                    ShortUnique id for inter-element referencing
                                                    Control0..1
                                                    Typestring
                                                    Is Modifierfalse
                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                    Summaryfalse
                                                    46. Condition.bodySite.extension
                                                    Definition

                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                    ShortAdditional content defined by implementations
                                                    Comments

                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                    Control0..*
                                                    TypeExtension
                                                    Is Modifierfalse
                                                    Summaryfalse
                                                    Alternate Namesextensions, user content
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                    SlicingThis element introduces a set of slices on Condition.bodySite.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                    • value @ url
                                                    • 48. Condition.bodySite.extension:bodySite
                                                      Slice NamebodySite
                                                      Definition

                                                      Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

                                                      ShortTarget anatomic location or structure
                                                      Control0..1
                                                      TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
                                                      Is Modifierfalse
                                                      Summaryfalse
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      50. Condition.bodySite.extension:bodySite.id
                                                      Definition

                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                      ShortUnique id for inter-element referencing
                                                      Control0..1
                                                      This element is affected by the following invariants: ele-1
                                                      Typeid
                                                      Is Modifierfalse
                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                      Summaryfalse
                                                      52. Condition.bodySite.extension:bodySite.extension
                                                      Definition

                                                      An Extension

                                                      ShortExtension
                                                      Control0..0
                                                      TypeExtension
                                                      Is Modifierfalse
                                                      Summaryfalse
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      SlicingThis element introduces a set of slices on Condition.bodySite.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                      • value @ url
                                                      • 54. Condition.bodySite.extension:bodySite.url
                                                        Definition

                                                        Source of the definition for the extension code - a logical name or a URL.

                                                        Shortidentifies the meaning of the extension
                                                        Comments

                                                        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                                                        Control1..1
                                                        Typeuri
                                                        Is Modifierfalse
                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                        Summaryfalse
                                                        Fixed Valuehttp://hl7.org/fhir/StructureDefinition/bodySite
                                                        56. Condition.bodySite.extension:bodySite.value[x]
                                                        Definition

                                                        Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                                                        ShortValue of extension
                                                        Control1..1
                                                        This element is affected by the following invariants: ext-1
                                                        TypeReference(BodyStructure (EU core))
                                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                        Is Modifierfalse
                                                        Summaryfalse
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        58. Condition.bodySite.coding
                                                        Definition

                                                        A reference to a code defined by a terminology system.

                                                        ShortCode defined by a terminology system
                                                        Comments

                                                        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                                        Control0..*
                                                        TypeCoding
                                                        Is Modifierfalse
                                                        Summarytrue
                                                        Requirements

                                                        Allows for alternative encodings within a code system, and translations to other code systems.

                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        60. Condition.bodySite.text
                                                        Definition

                                                        A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                                        ShortPlain text representation of the concept
                                                        Comments

                                                        Very often the text is the same as a displayName of one of the codings.

                                                        Control0..1
                                                        Typestring
                                                        Is Modifierfalse
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Summarytrue
                                                        Requirements

                                                        The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        62. Condition.subject
                                                        Definition

                                                        Indicates the patient or group who the condition record is associated with.

                                                        ShortWho has the condition?
                                                        Control1..1
                                                        TypeReference(Patient (EU core))
                                                        Is Modifierfalse
                                                        Obligations
                                                          ObligationsActor
                                                          SHALL:populate-if-knownCreator (IPS)
                                                          SHALL:handleConsumer (IPS)
                                                          SHOULD:displayConsumer (IPS)
                                                          Summarytrue
                                                          Requirements

                                                          Group is typically used for veterinary or public health use cases.

                                                          Alternate Namespatient
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          64. Condition.subject.id
                                                          Definition

                                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                          ShortUnique id for inter-element referencing
                                                          Control0..1
                                                          Typestring
                                                          Is Modifierfalse
                                                          XML FormatIn the XML format, this property is represented as an attribute.
                                                          Summaryfalse
                                                          66. Condition.subject.extension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                          ShortAdditional content defined by implementations
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          TypeExtension
                                                          Is Modifierfalse
                                                          Summaryfalse
                                                          Alternate Namesextensions, user content
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          SlicingThis element introduces a set of slices on Condition.subject.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                          • value @ url
                                                          • 68. Condition.subject.reference
                                                            Definition

                                                            A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                                                            ShortLiteral reference, Relative, internal or absolute URL
                                                            Comments

                                                            Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                                                            Control1..1
                                                            This element is affected by the following invariants: ref-1
                                                            Typestring
                                                            Is Modifierfalse
                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                            Obligations
                                                              ObligationsActor
                                                              SHALL:populate-if-knownCreator (IPS)
                                                              SHALL:handleConsumer (IPS)
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              70. Condition.subject.type
                                                              Definition

                                                              The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                                                              The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                                                              ShortType the reference refers to (e.g. "Patient")
                                                              Comments

                                                              This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                                                              Control0..1
                                                              BindingUnless not suitable, these codes SHALL be taken from ResourceType
                                                              (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                                                              Aa resource (or, for logical models, the URI of the logical model).

                                                              Typeuri
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              72. Condition.subject.identifier
                                                              Definition

                                                              An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                                                              ShortLogical reference, when literal reference is not known
                                                              Comments

                                                              When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                                                              When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                                                              Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                                                              Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                                                              NoteThis is a business identifier, not a resource identifier (see discussion)
                                                              Control0..1
                                                              TypeIdentifier
                                                              Is Modifierfalse
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              74. Condition.subject.display
                                                              Definition

                                                              Plain text narrative that identifies the resource in addition to the resource reference.

                                                              ShortText alternative for the resource
                                                              Comments

                                                              This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                                                              Control0..1
                                                              Typestring
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              76. Condition.encounter
                                                              Definition

                                                              The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

                                                              ShortEncounter created as part of
                                                              Comments

                                                              This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

                                                              Control0..1
                                                              TypeReference(Encounter)
                                                              Is Modifierfalse
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              78. Condition.onset[x]
                                                              Definition

                                                              Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                                                              ShortEstimated or actual date, date-time, or age
                                                              Comments

                                                              Age is generally used when the patient reports an age at which the Condition began to occur.

                                                              Control0..1
                                                              TypeChoice of: dateTime, Age, Period, Range, string
                                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Obligations
                                                                ObligationsActor
                                                                SHALL:populate-if-knownCreator (IPS)
                                                                SHALL:handleConsumer (IPS)
                                                                SHOULD:displayConsumer (IPS)
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                SlicingThis element introduces a set of slices on Condition.onset[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                                                                • type @ $this
                                                                • 80. Condition.onset[x]:onsetDateTime
                                                                  Slice NameonsetDateTime
                                                                  Definition

                                                                  Onset of the symptom, complaint, functional limitation, complication or date of diagnosis. A ‘vague’ date, such as only the year or the month and the year, is permitted.

                                                                  ShortEstimated or actual date, date-time, or age
                                                                  Comments

                                                                  Age is generally used when the patient reports an age at which the Condition began to occur.

                                                                  Control0..1
                                                                  TypedateTime
                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                  Is Modifierfalse
                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                  Obligations
                                                                    ObligationsActor
                                                                    SHOULD:able-to-populateCreator (IPS)
                                                                    SHALL:handleConsumer (IPS)
                                                                    SHOULD:displayConsumer (IPS)
                                                                    Summarytrue
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    82. Condition.abatement[x]
                                                                    Definition

                                                                    The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                                                                    ShortWhen in resolution/remission
                                                                    Comments

                                                                    There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                                                                    Control0..1
                                                                    This element is affected by the following invariants: con-4
                                                                    TypeChoice of: dateTime, Age, Period, Range, string
                                                                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                    Is Modifierfalse
                                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                    Summaryfalse
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    SlicingThis element introduces a set of slices on Condition.abatement[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                    • type @ $this
                                                                    • 84. Condition.abatement[x]:abatementDateTime
                                                                      Slice NameabatementDateTime
                                                                      Definition

                                                                      The date or estimated date that the condition resolved or went into remission. A ‘vague’ date, such as only the year or the month and the year, is permitted

                                                                      ShortWhen in resolution/remission
                                                                      Comments

                                                                      There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                                                                      Control0..1
                                                                      This element is affected by the following invariants: con-4
                                                                      TypedateTime
                                                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                      Is Modifierfalse
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Summaryfalse
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      86. Condition.recordedDate
                                                                      Definition

                                                                      The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

                                                                      ShortDate when the condition record was created
                                                                      Control0..1
                                                                      TypedateTime
                                                                      Is Modifierfalse
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      88. Condition.recorder
                                                                      Definition

                                                                      Individual who recorded the record and takes responsibility for its content.

                                                                      ShortWho recorded the condition
                                                                      Control0..1
                                                                      TypeReference(PractitionerRole (EU base), Practitioner (EU base), Patient (EU core), RelatedPerson)
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      90. Condition.asserter
                                                                      Definition

                                                                      Individual who is making the condition statement.

                                                                      ShortPerson who asserts this condition
                                                                      Control0..1
                                                                      TypeReference(Practitioner, PractitionerRole, Patient, RelatedPerson)
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      92. Condition.stage
                                                                      Definition

                                                                      Clinical stage or grade of a condition. May include formal severity assessments.

                                                                      ShortStage/grade
                                                                      Control0..*
                                                                      TypeBackboneElement
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Invariantscon-1: Stage SHALL have summary or assessment (summary.exists() or assessment.exists())
                                                                      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      94. Condition.stage.id
                                                                      Definition

                                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                      ShortUnique id for inter-element referencing
                                                                      Control0..1
                                                                      Typestring
                                                                      Is Modifierfalse
                                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                                      Summaryfalse
                                                                      96. Condition.stage.extension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                      ShortAdditional content defined by implementations
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Alternate Namesextensions, user content
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      98. Condition.stage.modifierExtension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                      Summarytrue
                                                                      Requirements

                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                      Alternate Namesextensions, user content, modifiers
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      100. Condition.stage.summary
                                                                      Definition

                                                                      A simple summary of the stage such as "Stage 3". The determination of the stage is disease-specific.

                                                                      ShortMost recent Stage Group
                                                                      Control0..1
                                                                      This element is affected by the following invariants: con-1
                                                                      BindingFor example codes, see ConditionStage
                                                                      (example to http://hl7.org/fhir/ValueSet/condition-stage|4.0.1)

                                                                      Codes describing condition stages (e.g. Cancer stages).

                                                                      TypeCodeableConcept
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      102. Condition.stage.assessment
                                                                      Definition

                                                                      Reference to the evidence on which the staging assessment is based.

                                                                      ShortFormal record of assessment
                                                                      Control0..*
                                                                      This element is affected by the following invariants: con-1
                                                                      TypeReference(ClinicalImpression, DiagnosticReport, Observation)
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      104. Condition.stage.type
                                                                      Definition

                                                                      The kind of staging, such as pathological or clinical staging.

                                                                      ShortStaging system used.
                                                                      Control0..1
                                                                      BindingFor example codes, see ConditionStageType
                                                                      (example to http://hl7.org/fhir/ValueSet/condition-stage-type|4.0.1)

                                                                      Codes describing the kind of condition staging (e.g. clinical or pathological).

                                                                      TypeCodeableConcept
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      106. Condition.evidence
                                                                      Definition

                                                                      Supporting evidence / manifestations that are the basis of the Condition's verification status, such as evidence that confirmed or refuted the condition.

                                                                      ShortSupporting evidence
                                                                      Comments

                                                                      The evidence may be a simple list of coded symptoms/manifestations, or references to observations or formal assessments, or both.

                                                                      Control0..*
                                                                      TypeBackboneElement
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Invariantscon-2: evidence SHALL have code or details (code.exists() or detail.exists())
                                                                      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      108. Condition.evidence.id
                                                                      Definition

                                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                      ShortUnique id for inter-element referencing
                                                                      Control0..1
                                                                      Typestring
                                                                      Is Modifierfalse
                                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                                      Summaryfalse
                                                                      110. Condition.evidence.extension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                      ShortAdditional content defined by implementations
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Alternate Namesextensions, user content
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      112. Condition.evidence.modifierExtension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                      Summarytrue
                                                                      Requirements

                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                      Alternate Namesextensions, user content, modifiers
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      114. Condition.evidence.code
                                                                      Definition

                                                                      A manifestation or symptom that led to the recording of this condition.

                                                                      ShortManifestation/symptom
                                                                      Control0..*
                                                                      This element is affected by the following invariants: con-2
                                                                      BindingFor example codes, see ManifestationAndSymptomCodes
                                                                      (example to http://hl7.org/fhir/ValueSet/manifestation-or-symptom|4.0.1)

                                                                      Codes that describe the manifestation or symptoms of a condition.

                                                                      TypeCodeableConcept
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      116. Condition.evidence.detail
                                                                      Definition

                                                                      Links to other relevant information, including pathology reports.

                                                                      ShortSupporting information found elsewhere
                                                                      Control0..*
                                                                      This element is affected by the following invariants: con-2
                                                                      TypeReference(Resource)
                                                                      Is Modifierfalse
                                                                      Summarytrue
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      118. Condition.note
                                                                      Definition

                                                                      Comment by the one who determined or updated the Problem.

                                                                      ShortAdditional information about the Condition
                                                                      Control0..*
                                                                      TypeAnnotation
                                                                      Is Modifierfalse
                                                                      Summaryfalse
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))